ASTM publications

Here are recent publications from ASTM International. To purchase ASTM standards in hard copy or PDF format, please call 0800 782 632 during business hours or email enquiries@standards.co.nz.

  • A74 - Standard Specification for Cast Iron Soil Pipe and Fittings has been revised to A74-15 developed by Committee A04.12, ASTM BOS Volume 01.02.
  • A139/A139M - Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) has been reapproved, available as A139/A139M-04(2015) developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A148/A148M - Standard Specification for Steel Castings, High Strength, for Structural Purposes has been revised to A148/A148M-15 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A213/A213M - Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes has been revised to A213/A213M-15b developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A234/A234M - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service has been revised to A234/A234M-15 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A249/A249M - Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes has been revised to A249/A249M-15 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A262 - Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels has been revised to A262-15 developed by Committee A01.14, ASTM BOS Volume 01.03.
  • A269/A269M - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service has been revised to A269/A269M-15 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A351/A351M - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts has been revised to A351/A351M-15 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A358/A358M - Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications has been revised to A358/A358M-15 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A388/A388M - Standard Practice for Ultrasonic Examination of Steel Forgings has been revised to A388/A388M-15 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A480/A480M - Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip has been revised to A480/A480M-15 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A502 - Standard Specification for Rivets, Steel, Structural has been reapproved, available as A502-03(2015) developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A515/A515M - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service has been reapproved, available as A515/A515M-10(2015) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A516/A516M - Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service has been reapproved, available as A516/A516M-10(2015) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A517/A517M - Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered has been reapproved, available as A517/A517M-10(2015) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A554 - Standard Specification for Welded Stainless Steel Mechanical Tubing has been revised to A554-15a developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A562/A562M - Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings has been reapproved, available as A562/A562M-10(2015) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A615/A615M - Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement has been revised to A615/A615M-15a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A618/A618M - Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing has been reapproved, available as A618/A618M-04(2015) developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A681 - Standard Specification for Tool Steels Alloy has been reapproved, available as A681-08(2015) developed by Committee A01.29, ASTM BOS Volume 01.05.
  • A706/A706M - Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement has been revised to A706/A706M-15 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A733 - Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples has been revised to A733-15 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A757/A757M - Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service has been revised to developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A778/A778M - Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products has been revised (with designation change) to A778/A778M-15 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A787/A787M - Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing has been revised to A787/A787M-15a developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A822/A822M - Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service has been reapproved, available as A822/A822M-04(2015) developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A832/A832M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium has been editorially changed, available as A832/A832M-10(2015)e1 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A844/A844M - Standard Specification for Steel Plates, 9 %  Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process has been reapproved, available as A844/A844M-09(2015) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A913/A913M - Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) has been revised to A913/A913M-15 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A950/A950M - Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling has been reapproved, available as A950/A950M-11(2015) developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A970/A970M - Standard Specification for Headed Steel Bars for Concrete Reinforcement has been editorially changed, available as A970/A970M-15e1 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A972/A972M - Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles has been reapproved, available as A972/A972M-00(2015) developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A992/A992M - Standard Specification for Structural Steel Shapes has been reapproved, available as A992/A992M-11(2015) developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A996/A996M - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement has been revised to A996/A996M-15 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1012 - Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins has been reapproved, available as A1012-10(2015) developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A1017/A1017M - Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten has been reapproved, available as A1017/A1017M-11(2015) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A1018/A1018M - Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength has been revised to A1018/A1018M-15 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1035/A1035M - Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement has been revised to A1035/A1035M-15 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1040 - Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels has been editorially changed, available as A1040-10(2015)e1 developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A1066/A1066M - Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP) has been editorially changed, available as A1066/A1066M-11(2015)e1 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A1078/A1078M - Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement has been editorially changed, available as A1078/A1078M-12e1 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1084 - Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels has been revised to A1084-15a developed by Committee A01.14, ASTM BOS Volume 01.03.
  • B154 - Standard Test Method for Mercurous Nitrate Test for Copper Alloys has been editorially changed, available as B154-12e1 developed by Committee B05.06, ASTM BOS Volume 02.01.
  • B194 - Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar has been revised to B194-15 developed by Committee B05.01, ASTM BOS Volume 02.01.
  • B196/B196M - Standard Specification for Copper-Beryllium Alloy Rod and Bar has been editorially changed, available as B196/B196M-07(2013)e1 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B224 - Standard Classification of Coppers has been revised to B224-15 developed by Committee B05.07, ASTM BOS Volume 02.01.
  • B242 - Standard Guide for Preparation of High-Carbon Steel for Electroplating has been editorially changed, available as B242-99(2014)e1 developed by Committee B08.02, ASTM BOS Volume 02.05.
  • C31/C31M - Standard Practice for Making and Curing Concrete Test Specimens in the Field has been revised to C31/C31M-15 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C109/C109M - Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) has been editorially changed, available as C109/C109M-13e1 developed by Committee C01.27, ASTM BOS Volume 04.01.
  • C110 - Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone has been revised to C110-15 developed by Committee C07.06, ASTM BOS Volume 04.01.
  • C125 - Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-15a developed by Committee C09.91, ASTM BOS Volume 04.02.
  • C140/C140M - Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units has been revised to C140/C140M-15 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C143/C143M - Standard Test Method for Slump of Hydraulic-Cement Concrete has been revised to C143/C143M-15 developed by Committee C09.60, ASTM BOS Volume 04.02.
  • C170/C170M - Standard Test Method for Compressive Strength of Dimension Stone has been revised to C170/C170M-15a developed by Committee C18.01, ASTM BOS Volume 04.07.
  • C241/C241M - Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic has been editorially changed, available as C241/C241M-15e1 developed by Committee C18.01, ASTM BOS Volume 04.07.
  • C363/C363M - Standard Test Method for Node Tensile Strength of Honeycomb Core Materials has been reapproved, available as developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C452 - Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate has been revised to C452-15 developed by Committee C01.29, ASTM BOS Volume 04.01.
  • C480/C480M - Standard Test Method for Flexure Creep of Sandwich Constructions has been reapproved, available as developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C494/C494M - Standard Specification for Chemical Admixtures for Concrete has been revised to C494/C494M-15 developed by Committee C09.23, ASTM BOS Volume 04.02.
  • C595/C595M - Standard Specification for Blended Hydraulic Cements has been editorially changed, available as C595/C595M-15e1 developed by Committee C01.10, ASTM BOS Volume 04.01.
  • C610 - Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation has been revised to C610-15 developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C639 - Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants has been revised to C639-15 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C652 - Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) has been revised to developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C670 - Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials has been revised to C670-15 developed by Committee C09.94, ASTM BOS Volume 04.02.
  • C679 - Standard Test Method for Tack-Free Time of Elastomeric Sealants has been revised to C679-15 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C755 - Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation has been editorially changed, available as C755-10e1 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C780 - Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry has been revised to C780-15 developed by Committee C12.02, ASTM BOS Volume 04.05.
  • C794 - Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants has been revised to C794-15a developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C926 - Standard Specification for Application of Portland Cement-Based Plaster has been revised to C926-15b developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1029 - Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation has been revised to C1029-15 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1063 - Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster has been revised to C1063-15a developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1126 - Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation has been revised to C1126-15 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1218/C1218M - Standard Test Method for Water-Soluble Chloride in Mortar and Concrete has been revised to C1218/C1218M-15 developed by Committee C09.69, ASTM BOS Volume 04.02.
  • C1240 - Standard Specification for Silica Fume Used in Cementitious Mixtures has been revised to C1240-15 developed by Committee C09.24, ASTM BOS Volume 04.02.
  • C1242 - Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems has been revised to C1242-15a developed by Committee C18.06, ASTM BOS Volume 04.07.
  • C1263 - Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders has been reapproved, available as C1263-95(2015) developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C1273 - Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures has been revised to C1273-15 developed by Committee C28.01, ASTM BOS Volume 15.01.
  • C1275 - Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature has been revised to C1275-15 developed by Committee C28.07, ASTM BOS Volume 15.01.
  • C1340/C1340M - Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program has been reapproved, available as C1340/C1340M-10(2015) developed by Committee C16.21, ASTM BOS Volume 04.06.
  • C1383 - Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method has been revised to C1383-15 developed by Committee C09.64, ASTM BOS Volume 04.02.
  • C1512 - Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products has been editorially changed, available as C1512-10(2015)e1 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C1699 - Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates has been reapproved, available as C1699-09(2015) developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C1702 - Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry has been revised to C1702-15a developed by Committee C01.26, ASTM BOS Volume 04.01.
  • C1708/C1708M - Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements has been revised to C1708/C1708M-15 developed by Committee C09.43, ASTM BOS Volume 04.02.
  • C1715/C1715M - Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems has been revised (with designation change) to developed by Committee C15.04, ASTM BOS Volume 04.05.
  • C1753 - Standard Practice for Evaluating Early Hydration of Hydraulic Cementitious Mixtures Using Thermal Measurements is a new standard, now available. C1753-15 developed by Committee C09.48, ASTM BOS Volume 04.02.
  • C1790 - Standard Specification for Fly Ash Facing Brick has been revised to C1790-15 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C1803 - Standard Guide for Abrasion Resistance of Mortar Surfaces Using a Rotary Platform Abraser is a new standard, now available. C1803-15 developed by Committee C09.62, ASTM BOS Volume 04.02.
  • C1812 - Standard Practice for Design of Journal Bearing Supports to be Used in Fiber Reinforced Concrete Beam Tests is a new standard, now available. C1812-15 developed by Committee C09.42, ASTM BOS Volume 04.02.
  • D61 - Standard Test Method for Softening Point of Pitches (Cube-in-Water Method) has been revised to D61-15 developed by Committee D02.05, ASTM BOS Volume 05.01.
  • D98 - Standard Specification for Calcium Chloride has been revised to D98-15 developed by Committee D04.31, ASTM BOS Volume 04.03.
  • D128 - Standard Test Methods for Analysis of Lubricating Grease has been editorially changed, available as D128-98(2014)e1 developed by Committee D02.G0.01, ASTM BOS Volume 05.01.
  • D140/D140M - Standard Practice for Sampling Bituminous Materials has been revised to D140/D140M-15 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D297 - Standard Test Methods for Rubber Products—Chemical Analysis has been revised to D297-15 developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D695 - Standard Test Method for Compressive Properties of Rigid Plastics has been revised to D695-15 developed by Committee D20.10, ASTM BOS Volume 08.01.
  • D698 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)) has been editorially changed, available as D698-12e2 developed by Committee D18.03, ASTM BOS Volume 04.08.
  • D847 - Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons has been revised to D847-15 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D974 - Standard Test Method for Acid and Base Number by Color-Indicator Titration has been editorially changed, available as developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D975 - Standard Specification for Diesel Fuel Oils has been revised to D975-15b developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D979/D979M - Standard Practice for Sampling Bituminous Paving Mixtures has been revised to D979/D979M-15 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D1015 - Standard Test Method for Freezing Points of High-Purity Hydrocarbons has been reapproved, available as D1015-05(2015) developed by Committee D02.04.0D, ASTM BOS Volume 05.01.
  • D1171 - Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) has been revised to D1171-15 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D1195/D1195M - Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements has been reapproved, available as D1195/D1195M-09(2015) developed by Committee E17.41, ASTM BOS Volume 04.03.
  • D1229 - Standard Test Method for Rubber Property—Compression Set at Low Temperatures has been reapproved, available as D1229-03(2015) developed by Committee D11.10, ASTM BOS Volume 09.01.
  • D1322 - Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel has been editorially changed, available as D1322-15e1 developed by Committee D02.J0.03, ASTM BOS Volume 05.01.
  • D1330 - Standard Specification for Rubber Sheet Gaskets has been reapproved (with editorial change), available as D1330-04(2015)e1 developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D1336 - Standard Test Method for Distortion of Yarn in Woven Fabrics has been reapproved, available as D1336-07(2015) developed by Committee D13.59, ASTM BOS Volume 07.01.
  • D1356 - Standard Terminology Relating to Sampling and Analysis of Atmospheres has been revised to developed by Committee D22.01, ASTM BOS Volume 11.07.
  • D1412/D1412M - Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30°C has been revised to D1412/D1412M-15 developed by Committee D05.21, ASTM BOS Volume 05.06.
  • D1414 - Standard Test Methods for Rubber O-Rings has been revised to D1414-15 developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D1434 - Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting has been reapproved (with editorial change), available as D1434-82(2015)e1 developed by Committee F02.10, ASTM BOS Volume 15.10.
  • D1506 - Standard Test Methods for Carbon Black—Ash Content has been revised to D1506-15 developed by Committee D24.31, ASTM BOS Volume 09.01.
  • D1514 - Standard Test Method for Carbon Black—Sieve Residue has been revised to D1514-15 developed by Committee D24.31, ASTM BOS Volume 09.01.
  • D1557 - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) has been editorially changed, available as D1557-12e1 developed by Committee D18.03, ASTM BOS Volume 04.08.
  • D1560 - Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus has been revised (with title change) to D1560-15 developed by Committee D04.20, ASTM BOS Volume 04.03.
  • D1655 - Standard Specification for Aviation Turbine Fuels has been revised to D1655-15c developed by Committee D02.J0.01, ASTM BOS Volume 05.01.
  • D1710 - Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes has been revised to D1710-15 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D1748 - Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet has been reapproved, available as D1748-10(2015) developed by Committee D02.L0.03, ASTM BOS Volume 05.01.
  • D1777 - Standard Test Method for Thickness of Textile Materials has been reapproved, available as D1777-96(2015) developed by Committee D13.59, ASTM BOS Volume 07.01.
  • D1785 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 has been revised to D1785-15 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • D1869 - Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe has been revised (with title change) to developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D2036 - Standard Test Methods for Cyanides in Water has been reapproved, available as developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D2053 - Standard Test Method for Colorfastness of Zippers to Light has been reapproved, available as D2053-99(2015) developed by Committee D13.54, ASTM BOS Volume 07.01.
  • D2161 - Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity has been editorially changed, available as D2161-10e1 developed by Committee D02.07, ASTM BOS Volume 05.01.
  • D2244 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates has been revised to developed by Committee E12.04, ASTM BOS Volume 06.01.
  • D2256/D2256M - Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method has been reapproved, available as D2256/D2256M-10(2015) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2386 - Standard Test Method for Freezing Point of Aviation Fuels has been editorially changed, available as D2386-15e1 developed by Committee D02.07, ASTM BOS Volume 05.01.
  • D2452 - Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds has been revised to D2452-15 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • D2453 - Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds has been revised to D2453-15 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • D2562 - Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics has been reapproved, available as D2562-94(2015) developed by Committee D20.18, ASTM BOS Volume 08.01.
  • D2563 - Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts has been reapproved, available as D2563-08(2015) developed by Committee D20.18, ASTM BOS Volume 08.01.
  • D2573/D2573M - Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils has been revised (with title change) to D2573/D2573M-15 developed by Committee D18.02, ASTM BOS Volume 04.08.
  • D2596 - Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method) has been revised to D2596-15 developed by Committee D02.G0.04, ASTM BOS Volume 05.01.
  • D2625 - Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) has been reapproved, available as D2625-94(2015) developed by Committee D02.L0.05, ASTM BOS Volume 05.01.
  • D2650 - Standard Test Method for Chemical Composition of Gases by Mass Spectrometry has been reapproved, available as D2650-10(2015) developed by Committee D02.04.0M, ASTM BOS Volume 05.01.
  • D2684/D2684M - Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products has been revised (with designation change) to D2684/D2684M-15 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D2724 - Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics has been reapproved, available as D2724-07(2015) developed by Committee D13.59, ASTM BOS Volume 07.01.
  • D2838 - Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting has been editorially changed, available as developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D2851 - Standard Specification for Liquid Optical Adhesive has been revised to D2851-15 developed by Committee D14.60, ASTM BOS Volume 15.06.
  • D2887 - Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography has been revised to D2887-15 developed by Committee D02.04.0H, ASTM BOS Volume 05.01.
  • D2914 - Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) has been revised to developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D2923 - Standard Test Method for Rigidity of Polyolefin Film and Sheeting (Withdrawn 2015) has been withdrawn, with no replacement. D2923- developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D2995 - Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors has been revised (with title change) to D2995-14 developed by Committee D04.24, ASTM BOS Volume 04.03.
  • D3107 - Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns has been reapproved, available as D3107-07(2015) developed by Committee D13.59, ASTM BOS Volume 07.01.
  • D3122 - Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings has been revised to D3122-15 developed by Committee F17.20, ASTM BOS Volume 08.04.
  • D3157 - Standard Test Method for Rubber from Natural Sources—Color has been reapproved, available as D3157-05(2015) developed by Committee D11.22, ASTM BOS Volume 09.01.
  • D3159 - Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials has been revised to D3159-15 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D3181 - Standard Guide for Conducting Wear Tests on Textiles has been revised to D3181-15 developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D3240 - Standard Test Method for Undissolved Water In Aviation Turbine Fuels has been revised to developed by Committee D02.J0.05, ASTM BOS Volume 05.01.
  • D3276 - Standard Guide for Painting Inspectors (Metal Substrates) has been revised to D3276-15 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D3294 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes has been revised to D3294-15 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D3295 - Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing has been revised to D3295-15 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D3389 - Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) has been revised to D3389-15 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D3511/D3511M - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester has been revised to D3511/D3511M-15 developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D3677 - Standard Test Methods for Rubber—Identification by Infrared Spectrophotometry has been reapproved, available as D3677-10(2015) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D3763 - Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors has been revised to D3763-15 developed by Committee D20.10, ASTM BOS Volume 08.02.
  • D3769 - Standard Test Method for Microcellular Urethanes—High-Temperature Sag has been revised to D3769-15 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D3771 - Standard Specification for Rubber Seals Used in Concentrating Solar Collectors has been revised to D3771-15 developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D3772 - Standard Specification for Industrial Rubber Finger Cots has been revised (with title change) to D3772-15 developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D3787 - Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test has been revised to D3787-15 developed by Committee D13.59, ASTM BOS Volume 07.01.
  • D3846 - Standard Test Method for In-Plane Shear Strength of Reinforced Plastics has been reapproved, available as D3846-08(2015) developed by Committee D20.18, ASTM BOS Volume 08.02.
  • D3878 - Standard Terminology for Composite Materials has been revised to D3878-15 developed by Committee D30.01, ASTM BOS Volume 15.03.
  • D3885 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method) has been reapproved, available as D3885-07a(2015) developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D3886 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus) has been reapproved, available as D3886-99(2015) developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D3888 - Standard Terminology for Yarn Spinning Systems has been revised to D3888-15 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D3892 - Standard Practice for Packaging/Packing of Plastics has been revised to D3892-15 developed by Committee D20.94, ASTM BOS Volume 08.02.
  • D3900 - Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry has been revised to D3900-15 developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D3903 - Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems has been revised to D3903-15 developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D3910 - Standard Practices for Design, Testing, and Construction of Slurry Seal has been revised to D3910-15 developed by Committee D04.24, ASTM BOS Volume 04.03.
  • D3917 - Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes has been editorially changed, available as D3917-15e1 developed by Committee D20.18, ASTM BOS Volume 08.02.
  • D3929 - Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method has been reapproved, available as D3929-03(2015) developed by Committee D14.40, ASTM BOS Volume 15.06.
  • D3963/D3963M - Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars has been revised to D3963/D3963M-15 developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D4005 - Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings has been reapproved, available as D4005-92(2015) developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D4044/D4044M - Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers has been revised (with designation change) to D4044/D4044M-15 developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D4105/D4105M - Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method has been editorially changed, available as D4105/D4105M-15e1 developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D4175 - Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants has been revised to D4175-15b developed by Committee D02.95, ASTM BOS Volume 05.02.
  • D4177 - Standard Practice for Automatic Sampling of Petroleum and Petroleum Products has been revised to D4177-15 developed by Committee D02.02, ASTM BOS Volume 05.02.
  • D4222 - Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements has been reapproved (with editorial change), available as D4222-03(2015)e1 developed by Committee D32.01, ASTM BOS Volume 05.05.
  • D4282 - Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion has been revised to developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D4412 - Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits has been revised to D4412-15 developed by Committee D19.24, ASTM BOS Volume 11.02.
  • D4439 - Standard Terminology for Geosynthetics has been revised to D4439-15a developed by Committee D35.93, ASTM BOS Volume 04.13.
  • D4442 - Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials has been revised (with title change) to D4442-15 developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D4517 - Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy has been revised to D4517-15 developed by Committee D19.03, ASTM BOS Volume 11.02.
  • D4531 - Standard Test Methods for Bulk and Dry Density of Peat and Peat Products has been revised to D4531-15 developed by Committee D18.22, ASTM BOS Volume 04.08.
  • D4549 - Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) has been revised to D4549-15 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D4575 - Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers has been reapproved, available as D4575-09(2015) developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D4596 - Standard Practice for Collection of Channel Samples of Coal in a Mine has been reapproved, available as D4596-09(2015) developed by Committee D05.18, ASTM BOS Volume 05.06.
  • D4602 - Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment has been reapproved, available as D4602-93(2015) developed by Committee E17.41, ASTM BOS Volume 04.03.
  • D4662 - Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols has been revised to D4662-15 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D4678 - Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials has been revised to D4678-15a developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D4685/D4685M - Standard Test Method for Pile Fabric Abrasion has been revised (with designation change) to D4685/D4685M-15 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D4694 - Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device has been reapproved, available as D4694-09(2015) developed by Committee E17.41, ASTM BOS Volume 04.03.
  • D4695 - Standard Guide for General Pavement Deflection Measurements has been reapproved, available as D4695-03(2015) developed by Committee E17.41, ASTM BOS Volume 04.03.
  • D4778 - Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions has been revised to D4778-15 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D4800 - Standard Guide for Classifying and Specifying Adhesives has been reapproved, available as D4800-94(2015) developed by Committee D14.60, ASTM BOS Volume 15.06.
  • D4814 - Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-15a developed by Committee D02.A0.01, ASTM BOS Volume 05.02.
  • D4851 - Standard Test Methods for Coated and Laminated Fabrics for Architectural Use has been reapproved, available as D4851-07(2015) developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D4936 - Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration has been reapproved, available as D4936-10(2015) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D5025 - Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials has been editorially changed, available as D5025-12e1 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D5035 - Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) has been reapproved, available as D5035-11(2015) developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D5050 - Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts has been reapproved, available as D5050-08(2015) developed by Committee D34.03, ASTM BOS Volume 11.04.
  • D5088 - Standard Practice for Decontamination of Field Equipment Used at Waste Sites has been revised to developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D5143 - Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography has been reapproved (with editorial change), available as D5143-06(2015)e1 developed by Committee D18.06, ASTM BOS Volume 04.08.
  • D5171 - Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons has been revised to D5171-15 developed by Committee D13.54, ASTM BOS Volume 07.02.
  • D5192 - Standard Practice for Collection of Coal Samples from Core has been reapproved, available as D5192-09(2015) developed by Committee D05.18, ASTM BOS Volume 05.06.
  • D5359 - Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber has been reapproved, available as D5359-98(2015) developed by Committee D34.03, ASTM BOS Volume 11.04.
  • D5445 - Standard Practice for Pictorial Markings for Handling of Goods has been revised to D5445-15 developed by Committee D10.11, ASTM BOS Volume 15.10.
  • D5513 - Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis has been revised (with title change) to D5513-15 developed by Committee D34.01.06, ASTM BOS Volume 11.04.
  • D5530 - Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry has been revised to D5530-15 developed by Committee D34.01.06, ASTM BOS Volume 11.04.
  • D5543 - Standard Test Method for Low-Level Dissolved Oxygen in Water has been revised to D5543-15 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D5587 - Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure has been revised to D5587-15 developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D5631 - Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br) has been revised to D5631-15 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D5667 - Standard Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash has been reapproved, available as D5667-95(2015) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D5672/D5672M - Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique has been revised (with designation change) to D5672/D5672M-15 developed by Committee D20.22, ASTM BOS Volume 08.03.
  • D5710/D5710M - Standard Specification for Trinidad Lake Modified Asphalt has been revised to D5710/D5710M-15 developed by Committee D04.40, ASTM BOS Volume 04.03.
  • D5712 - Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method has been revised (with title change) to D5712-15 developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D5745 - Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation has been revised to D5745-15 developed by Committee D34.05, ASTM BOS Volume 11.04.
  • D5769 - Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry has been reapproved, available as D5769-10(2015) developed by Committee D02.04.0M, ASTM BOS Volume 05.02.
  • D5792 - Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives has been reapproved, available as D5792-10(2015) developed by Committee D34.01.01, ASTM BOS Volume 11.04.
  • D5829 - Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories (Withdrawn 2015) has been withdrawn, with no replacement. D5829-96(2007) developed by Committee D34.01.06, ASTM BOS Volume 11.04.
  • D5900 - Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM) has been revised to D5900-15b developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D5902 - Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value has been reapproved, available as D5902-05(2015) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D5917 - Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration has been editorially changed, available as D5917-15e1 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5963 - Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) has been reapproved, available as D5963-04(2015) developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D5974 - Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography has been revised to D5974-15 developed by Committee D01.34, ASTM BOS Volume 06.03.
  • D5997 - Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection has been revised to D5997-15 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D6000/D6000M - Standard Guide for Presentation of Water-Level Information from Groundwater Sites has been editorially changed, available as D6000/D6000M-15e1 developed by Committee D18.21, ASTM BOS Volume 04.09.
  • D6024/D6024M - Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application has been revised (with designation change) to D6024/D6024M-15 developed by Committee D18.15, ASTM BOS Volume 04.09.
  • D6027/D6027M - Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes has been reinstated as D6027/D6027M-15 developed by Committee D18.95, ASTM BOS Volume 04.09.
  • D6044 - Standard Guide for Representative Sampling for Management of Waste and Contaminated Media has been reapproved, available as D6044-96(2015) developed by Committee D34.01.01, ASTM BOS Volume 11.04.
  • D6087 - Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar has been reapproved (with editorial change), available as D6087-08(2015)e1 developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D6151/D6151M - Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling has been revised (with designation change) to D6151/D6151M-15 developed by Committee D18.02, ASTM BOS Volume 04.09.
  • D6207 - Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature has been reapproved, available as D6207-03(2015) developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D6226 - Standard Test Method for Open Cell Content of Rigid Cellular Plastics has been revised to D6226-15 developed by Committee D20.22, ASTM BOS Volume 08.03.
  • D6259 - Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method has been revised (with title change) to developed by Committee D02.94, ASTM BOS Volume 05.03.
  • D6317 - Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection has been revised to D6317-15 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D6329 - Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers has been reapproved, available as D6329-98(2015) developed by Committee D22.08, ASTM BOS Volume 11.07.
  • D6352 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography has been revised to D6352-15 developed by Committee D02.04.0H, ASTM BOS Volume 05.03.
  • D6372 - Standard Practice for Design, Testing, and Construction of Microsurfacing has been revised to D6372-15 developed by Committee D04.24, ASTM BOS Volume 04.03.
  • D6381/D6381M - Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance has been revised to D6381/D6381M-15 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D6479 - Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints has been revised to D6479-15 developed by Committee D13.20, ASTM BOS Volume 07.02.
  • D6495/D6495M - Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners has been revised to D6495/D6495M-15 developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D6549 - Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) has been reapproved, available as D6549-06(2015) developed by Committee D02.L0.06, ASTM BOS Volume 05.03.
  • D6614 - Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method has been reapproved, available as D6614-07(2015) developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D6615 - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel has been revised to D6615-15a developed by Committee D02.J0.01, ASTM BOS Volume 05.03.
  • D6637/D6637M - Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method has been revised to D6637/D6637M-15 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D6640 - Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations has been reapproved, available as D6640-01(2015) developed by Committee D34.01.03, ASTM BOS Volume 11.04.
  • D6704 - Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material has been reapproved, available as D6704-08(2015) developed by Committee D04.27, ASTM BOS Volume 04.03.
  • D6708 - Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material has been revised to developed by Committee D02.94, ASTM BOS Volume 05.03.
  • D6741 - Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content has been reapproved, available as D6741-10(2015) developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D6743 - Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids has been reapproved, available as D6743-11(2015) developed by Committee D02.L0.06, ASTM BOS Volume 05.03.
  • D6770 - Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method) has been reapproved, available as D6770-07(2015) developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D6797 - Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test has been revised to D6797-15 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D6798 - Standard Terminology Relating to Flax and Linen has been editorially changed, available as D6798-02(2013)e2 developed by Committee D13.17, ASTM BOS Volume 07.02.
  • D6828 - Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure has been reapproved, available as D6828-02(2015) developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D6843 - Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC) has been reapproved, available as D6843-10(2015) developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D6844 - Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC) has been reapproved, available as D6844-10(2015) developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D6890 - Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber has been revised to developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D6938 - Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) has been revised to developed by Committee D18.08, ASTM BOS Volume 04.09.
  • D6943 - Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings has been revised (with title change) to D6943-15 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D6944 - Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling has been revised (with title change) to D6944-15 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D6951/D6951M - Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications has been reapproved, available as D6951/D6951M-09(2015) developed by Committee E17.41, ASTM BOS Volume 04.03.
  • D6969 - Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis has been revised to D6969-15 developed by Committee D02.05, ASTM BOS Volume 05.03.
  • D7028 - Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) has been reapproved, available as D7028-07(2015) developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D7039 - Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry has been revised to D7039-15a developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7047 - Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium) has been editorially changed, available as D7047-15e1 developed by Committee D18.25, ASTM BOS Volume 04.09.
  • D7111 - Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) has been revised to D7111-15a developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7126 - Standard Test Method for On-Line Colorimetric Measurement of Silica has been revised to D7126-15 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D7175 - Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer has been revised to D7175-15 developed by Committee D04.44, ASTM BOS Volume 04.03.
  • D7204 - Standard Practice for Sampling Waste Streams on Conveyors has been revised to D7204-15 developed by Committee D34.01.02, ASTM BOS Volume 11.04.
  • D7213 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography has been revised to D7213-15 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7237 - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection has been revised (with title change) to D7237-15a developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7365 - Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide has been reapproved, available as D7365-09a(2015) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7440 - Standard Practice for Characterizing Uncertainty in Air Quality Measurements has been editorially changed, available as developed by Committee D22.01, ASTM BOS Volume 11.07.
  • D7500 - Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography has been revised to D7500-15 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7504 - Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number has been editorially changed, available as D7504-15e1 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D7508/D7508M - Standard Specification for Polyolefin Chopped Strands for Use in Concrete has been reapproved, available as D7508/D7508M-10(2015) developed by Committee D13.58, ASTM BOS Volume 07.02.
  • D7566 - Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons has been revised to D7566-15a developed by Committee D02.J0.06, ASTM BOS Volume 05.04.
  • D7567 - Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction (Withdrawn 2015) has been withdrawn, with no replacement. D7567- developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D7620 - Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection has been reapproved, available as D7620-10(2015) developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7662 - Standard Test Method for Carbon Content in Carbon Black Feedstock Oils has been revised to D7662-15 developed by Committee D24.66, ASTM BOS Volume 09.01.
  • D7711 - Standard Guide for Description of Polymer Pellet Defects has been reapproved, available as D7711-11(2015) developed by Committee D20.92, ASTM BOS Volume 08.03.
  • D7719 - Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline has been revised to D7719-15 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7737/D7737M - Standard Test Method for Individual Geogrid Junction Strength has been revised to D7737/D7737M-15 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D7772 - Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract has been revised to D7772-15 developed by Committee D24.66, ASTM BOS Volume 09.01.
  • D7854 - Standard Test Method for Carbon Black-Void Volume at Mean Pressure has been revised to D7854-15 developed by Committee D24.11, ASTM BOS Volume 09.01.
  • D7873 - Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method) has been editorially changed, available as D7873-13e2 developed by Committee D02.09.0C, ASTM BOS Volume 05.04.
  • D7920 - Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography has been editorially changed, available as D7920-15e1 developed by Committee D02.04.0L, ASTM BOS Volume 05.04.
  • D7945 - Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer has been revised to D7945-15 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7969 - Standard Specification for Gravity Convection and Forced Ventilation Ovens is a new standard, now available. D7969-15 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D7981 - Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor is a new standard, now available. D7981-15 developed by Committee D04.20, ASTM BOS Volume 04.03.
  • D8007 - Standard Test Method for Wale and Course Count of Weft Knitted Fabrics is a new standard, now available. D8007-15 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D8008 - Standard Practice for Representative Field Sampling of Traffic Paints is a new standard, now available. D8008-15 developed by Committee D01.44, ASTM BOS Volume 06.02.
  • E96/E96M - Standard Test Methods for Water Vapor Transmission of Materials has been revised to E96/E96M-15 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • E100 - Standard Specification for ASTM Hydrometers has been revised to E100-15 developed by Committee E20.05, ASTM BOS Volume 14.03.
  • E119 - Standard Test Methods for Fire Tests of Building Construction and Materials has been revised to E119-15 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E155 - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings has been revised to E155-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E162 - Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source has been revised to E162-15a developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E170 - Standard Terminology Relating to Radiation Measurements and Dosimetry has been revised to E170-15a developed by Committee E10.93, ASTM BOS Volume 12.02.
  • E176 - Standard Terminology of Fire Standards has been revised to E176-15a developed by Committee E05.31, ASTM BOS Volume 04.07.
  • E186 - Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings has been revised to E186-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E192 - Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications has been revised to E192-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E246 - Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry has been reapproved, available as E246-10(2015) developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E272 - Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings has been revised to E272-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E280 - Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings has been revised to E280-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E310 - Standard Reference Radiographs for Tin Bronze Castings has been revised to E310-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E337 - Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) has been revised to developed by Committee D22.11, ASTM BOS Volume 11.07.
  • E386 - Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy (Withdrawn 2015) has been withdrawn and replaced by E2977 developed by Committee E13.15, ASTM BOS Volume 03.06.
  • E390 - Standard Reference Radiographs for Steel Fusion Welds has been revised to E390-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E407 - Standard Practice for Microetching Metals and Alloys has been reapproved, available as E407-07(2015) developed by Committee E04.01, ASTM BOS Volume 03.01.
  • E446 - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness has been revised to E446-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E477 - Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers has been editorially changed, available as E477-13e1 developed by Committee E33.08, ASTM BOS Volume 04.06.
  • E505 - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings has been revised to E505-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E536 - Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys has been revised to developed by Committee E01.05, ASTM BOS Volume 03.05.
  • E605/E605M - Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members has been editorially changed, available as E605/E605M-93(2015)e1 deeveloped by Committee E06.21, ASTM BOS Volume 04.11.
  • E648 - Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source has been revised to E648-15 developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E659 - Standard Test Method for Autoignition Temperature of Chemicals has been revised (with title change) to E659-15 developed by Committee E27.04, ASTM BOS Volume 14.02.
  • E670 - Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter has been reapproved, available as E670-09(2015) developed by Committee E17.21, ASTM BOS Volume 04.03.
  • E689 - Standard Reference Radiographs for Ductile Iron Castings has been revised to E689-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E702 - Standard Specification for Municipal Ferrous Scrap has been reapproved, available as E702-85(2015) developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E736/E736M - Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members has been editorially changed, available as E736/E736M-00(2015)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E759/E759M - Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members has been editorially changed, available as E759/E759M-92(2015)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E760/E760M - Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members has been editorially changed, available as E760/E760M-92(2015)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E761/E761M - Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members has been editorially changed, available as E761/E761M-92(2015)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E775 - Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel has been revised to E775-15 developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E778 - Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples has been revised (with title change) to E778-15 developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E790 - Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples has been revised (with title change) to E790-15 developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E802 - Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness has been revised to E802-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E859/E859M - Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members has been editorially changed, available as E859/E859M-93(2015)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E937/E937M - Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members has been editorially changed, available as E937/E937M-93(2015)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E956 - Standard Classification for Municipal-Mixed Nonferrous Metals (MNM) has been reapproved, available as E956-83(2015) developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E1037 - Standard Test Method for Measuring Particle Size Distribution of RDF-5 has been revised to E1037-15 developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E1105 - Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference has been revised to E1105-15 developed by Committee E06.51, ASTM BOS Volume 04.11.
  • E1107 - Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations has been revised to E1107-15 developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E1142 - Standard Terminology Relating to Thermophysical Properties has been revised to E1142-15 developed by Committee E37.03, ASTM BOS Volume 14.02.
  • E1166 - Standard Guide for Network Level Pavement Management has been reapproved, available as E1166-00(2015) developed by Committee E17.42, ASTM BOS Volume 04.03.
  • E1281 - Standard Guide for Nuclear Facility Decommissioning Plans has been revised to E1281-15 developed by Committee E10.03, ASTM BOS Volume 12.02.
  • E1309 - Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases (Withdrawn 2015) has been withdrawn, with no replacement. E1309- developed by Committee D30.01, ASTM BOS Volume 15.03.
  • E1316 - Standard Terminology for Nondestructive Examinations has been revised to E1316-15 developed by Committee E07.92, ASTM BOS Volume 03.03.
  • E1320 - Standard Reference Radiographs for Titanium Castings has been revised to E1320-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E1331 - Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry has been revised to E1331-15 developed by Committee E12.02, ASTM BOS Volume 06.01.
  • E1354 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter has been revised to E1354-15a developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E1386 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction has been revised to E1386-15 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E1434 - Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015) has been withdrawn, with no replacement. E1434- developed by Committee D30.01, ASTM BOS Volume 15.03.
  • E1471 - Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases (Withdrawn 2015) has been withdrawn, with no replacement. E1471- developed by Committee D30.01, ASTM BOS Volume 15.03.
  • E1513/E1513M - Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) has been editorially changed, available as E1513/E1513M-93(2015)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E1519 - Standard Terminology Relating to Agricultural Tank Mix Adjuvants has been revised to E1519-15a developed by Committee E35.22, ASTM BOS Volume 11.05.
  • E1546 - Standard Guide for Development of Fire-Hazard-Assessment Standards has been revised to E1546-15 developed by Committee E05.33, ASTM BOS Volume 04.07.
  • E1648 - Standard Reference Radiographs for Examination of Aluminum Fusion Welds has been revised to E1648-15 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E1686 - Standard Guide for Applying Environmental Noise Measurement Methods and Criteria has been editorially changed, available as E1686-10e1 developed by Committee E33.09, ASTM BOS Volume 04.06.
  • E1730 - Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores has been revised to E1730-15 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1777 - Standard Guide for Prioritization of Data Needs for Pavement Management has been reapproved, available as E1777-09(2015) developed by Committee E17.42, ASTM BOS Volume 04.03.
  • E1778 - Standard Terminology Relating to Pavement Distress has been reapproved, available as E1778-98a(2015) developed by Committee E17.42, ASTM BOS Volume 04.03.
  • E1801 - Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters has been revised to E1801-15 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1819 - Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities has been revised to E1819-15 developed by Committee E10.03, ASTM BOS Volume 12.02.
  • E1820 - Standard Test Method for Measurement of Fracture Toughness has been revised to E1820-15 developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E1851 - Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures has been revised to E1851-15 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1889 - Standard Guide for Pavement Management Implementation has been reapproved, available as E1889-97(2015) developed by Committee E17.42, ASTM BOS Volume 04.03.
  • E1922 - Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials has been reapproved, available as E1922-04(2015) developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E1926 - Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements has been reapproved, available as E1926-08(2015) developed by Committee E17.33, ASTM BOS Volume 04.03.
  • E1975 - Standard Specification for Shelter, Electrical, Equipment S-280/G has been revised to E1975-15 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E2021 - Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers has been revised to developed by Committee E27.04, ASTM BOS Volume 14.02.
  • E2100 - Standard Practice for Calculating the International Runway Friction Index has been reapproved, available as E2100-04(2015) developed by Committee E17.21, ASTM BOS Volume 04.03.
  • E2154 - Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME) has been revised to E2154-15a developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E2161 - Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology has been revised to E2161-15 developed by Committee E37.03, ASTM BOS Volume 14.02.
  • E2204 - Standard Guide for Summarizing the Economic Impacts of Building-Related Projects has been revised to developed by Committee E06.81, ASTM BOS Volume 04.12.
  • E2297 - Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods has been revised to E2297-15 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E2393 - Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers has been reapproved, available as E2393-10a(2015) developed by Committee E06.21, ASTM BOS Volume 04.12.
  • E2418 - Standard Guide for Readily Observable Mold and Conditions Conducive to Mold in Commercial Buildings: Baseline Survey Process (Withdrawn 2015) has been withdrawn, with no replacement. E2418- developed by Committee E50.02, ASTM BOS Volume 11.05.
  • E2420 - Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities has been revised to E2420-15 developed by Committee E10.03, ASTM BOS Volume 12.02.
  • E2421 - Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities has been revised to E2421-15 developed by Committee E10.03, ASTM BOS Volume 12.02.
  • E2506 - Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities has been revised to E2506-15 developed by Committee E06.81, ASTM BOS Volume 04.12.
  • E2546 - Standard Practice for Instrumented Indentation Testing has been editorially changed, available as E2546-07e1 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E2585 - Standard Practice for Thermal Diffusivity by the Flash Method has been reapproved, available as E2585-09(2015) developed by Committee E37.05, ASTM BOS Volume 14.02.
  • E2603 - Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters has been revised to E2603-15 developed by Committee E37.09, ASTM BOS Volume 14.02.
  • E2653 - Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories has been revised to E2653-15 developed by Committee E05.31, ASTM BOS Volume 04.07.
  • E2658 - Standard Practices for Verification of Speed for Material Testing Machines has been revised to E2658-15 developed by Committee E28.01, ASTM BOS Volume 03.01.
  • E2670 - Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras has been revised to E2670-15 developed by Committee E12.06, ASTM BOS Volume 06.01.
  • E2789 - Standard Guide for Fretting Fatigue Testing has been reapproved, available as E2789-10(2015) developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2844 - Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit has been editorially changed, available as E2844-15e1 developed by Committee E60.01, ASTM BOS Volume 04.12.
  • E2890 - Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method has been editorially changed, available as E2890-12e1 developed by Committee E37.01, ASTM BOS Volume 14.02.
  • E2899 - Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending has been revised to E2899-15 developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E2947 - Standard Guide for Building Enclosure Commissioning has been revised to E2947-15 developed by Committee E06.55, ASTM BOS Volume 04.12.
  • E2957 - Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections is a new standard, now available. E2957-15 developed by Committee E05.14, ASTM BOS Volume 04.07.
  • E2965 - Standard Test Method for Determination of Low Levels Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter is a new standard, now available. E2965-15 developed by Committee E05.23, ASTM BOS Volume 04.07.
  • E2981 - Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications is a new standard, now available. E2981-15 developed by Committee E07.10, ASTM BOS Volume 03.03.
  • E2986 - Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes is a new standard, now available. E2986-15 developed by Committee E60.13, ASTM BOS Volume 04.12.
  • E2988 - Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics has been revised to E2988-15a developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E2989 - Standard Guide for Assessment of Continued Applicability of Fire Test Reports Used in Building Regulation has been revised to E2989-15a developed by Committee E05.31, ASTM BOS Volume 04.07.
  • E2995 - Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers has been revised to E2995-15 developed by Committee E20.05, ASTM BOS Volume 14.03.
  • E3011 - Standard Test Method for In vitro production of Clostridium Difficile Spores is a new standard, now available. E3011-15 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E3013/E3013M - Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction is a new standard, now available. E3013/E3013M-15 developed by Committee E17.41, ASTM BOS Volume 04.03.
  • E3020 - Standard Practice for Ignition Sources is a new standard, now available. E3020-15 developed by Committee E05.33, ASTM BOS Volume 04.07.
  • E3022 - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing is a new standard, now available. E3022-15 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E3023 - Standard Practice for Probability of Detection Analysis for â Versus a Data is a new standard, now available. E3023-15 developed by Committee E07.10, ASTM BOS Volume 03.03.
  • E3026 - Standard Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Visual Moisture Assessment Process is a new standard, now available. E3026-15 developed by Committee E50.02, ASTM BOS Volume 11.05.
  • F96 - Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms has been reapproved, available as F96-77(2015) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F119 - Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method) has been reapproved, available as F119-82(2015) developed by Committee F02.10, ASTM BOS Volume 15.10.
  • F180 - Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices has been reapproved, available as F180-94(2015) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F205 - Standard Test Method for Measuring Diameter of Fine Wire by Weighing has been reapproved, available as F205-94(2015) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F256 - Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium has been reapproved, available as F256-05(2015) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F290 - Standard Specification for Round Wire for Winding Electron Tube Grid Laterals has been reapproved, available as F290-94(2015) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F375 - Standard Specification for Integrated Circuit Lead Frame Material has been reapproved, available as F375-89(2015) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F377 - Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires has been reapproved, available as F377-03(2015) developed by Committee F09.10, ASTM BOS Volume 09.02.
  • F381 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines has been revised to F381-15 developed by Committee F08.17, ASTM BOS Volume 15.07.
  • F414 - Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger has been revised to F414-15 developed by Committee F09.30, ASTM BOS Volume 09.02.
  • F421 - Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires has been revised to developed by Committee F09.30, ASTM BOS Volume 09.02.
  • F656 - Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings has been revised to F656-15 developed by Committee F17.20, ASTM BOS Volume 08.04.
  • F859 - Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type has been revised to F859-15 developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F876 - Standard Specification for Crosslinked Polyethylene (PEX) Tubing has been revised to F876-15 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F910 - Standard Specification for Face Guards for Youth Baseball has been reapproved, available as F910-04(2015) developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F918 - Standard Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product) has been revised to F918-15 developed by Committee F26.03, ASTM BOS Volume 15.12.
  • F919 - Standard Specification for Slicing Machines, Food, Electric has been revised to F919-15 developed by Committee F26.04, ASTM BOS Volume 15.12.
  • F955 - Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances has been revised to F955-15 developed by Committee F23.80, ASTM BOS Volume 11.03.
  • F1004 - Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures has been revised to F1004-15a developed by Committee F15.16, ASTM BOS Volume 15.11.
  • F1035 - Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System has been reapproved, available as F1035-03(2015) developed by Committee F09.10, ASTM BOS Volume 09.02.
  • F1081 - Standard Specification for Competition Wrestling Mats has been reapproved, available as F1081-09(2015) developed by Committee F08.12, ASTM BOS Volume 15.07.
  • F1107 - Standard Terminology Relating to Snowboarding has been reapproved, available as F1107-04(2015) developed by Committee F27.30, ASTM BOS Volume 15.07.
  • F1134 - Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators has been editorially changed, available as F1134-15e1 developed by Committee F25.10, ASTM BOS Volume 01.07.
  • F1237 - Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing has been revised to F1237-15 developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F1322 - Standard Guide for Selection of Shipboard Incinerators has been revised to F1322-15 developed by Committee F25.06, ASTM BOS Volume 01.07.
  • F1364 - Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System has been reapproved, available as F1364-03(2015) developed by Committee F09.10, ASTM BOS Volume 09.02.
  • F1466 - Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications has been reapproved, available as F1466-99(2015) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F1492 - Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating has been revised to F1492-15 developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F1555 - Standard Guide for Characteristics for Extremity Splints has been reapproved, available as F1555-94(2015) developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F1556 - Standard Guide for Spinal Immobilization and Extrication (SPINE) Device Characteristics has been reapproved, available as F1556-94(2015) developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F1558 - Standard Guide for Characteristics for Adjunct Cervical Spine Immobilization Devices (ACSID) has been reapproved, available as F1558-94(2015) developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F1559 - Standard Guide for Characteristics for Cervical Spine Immobilization Collar(s) (CSIC) has been reapproved, available as F1559-94(2015) developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F1596 - Standard Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity has been revised (with title change) to F1596-15 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1712 - Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications (Withdrawn 2015) has been withdrawn and replaced by F2611 developed by Committee F14.50, ASTM BOS Volume 01.06.
  • F1722 - Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis has been revised to F1722-15 developed by Committee F27.30, ASTM BOS Volume 15.07.
  • F1750 - Standard Specification for Paintball Marker Threaded-Propellant Source Interface has been reapproved, available as F1750-11(2015) developed by Committee F08.24, ASTM BOS Volume 15.07.
  • F1882 - Standard Specification for Residential Basketball Systems has been revised to F1882-15 developed by Committee F08.25, ASTM BOS Volume 15.07.
  • F2052 - Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment has been revised to F2052-15 developed by Committee F04.15, ASTM BOS Volume 13.01.
  • F2080 - Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe has been revised to F2080-15 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F2175 - Standard Specification for Portable and Permanent Emergency Escape Ladders for Residential Use has been reapproved, available as F2175-07(2015) developed by Committee F15.47, ASTM BOS Volume 15.11.
  • F2220 - Standard Specification for Headforms has been revised to F2220-15 developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F2225 - Standard Safety Specification for Consumer Trampoline Enclosures has been revised to F2225-15 developed by Committee F08.17, ASTM BOS Volume 15.07.
  • F2271 - Standard Specification for Paintball Marker Barrel Blocking Devices has been reapproved, available as F2271-11(2015) developed by Committee F08.24, ASTM BOS Volume 15.07.
  • F2282 - Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners has been reapproved, available as F2282-03(2015) developed by Committee F16.93, ASTM BOS Volume 01.08.
  • F2329/F2329M - Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners has been revised to F2329/F2329M-15 developed by Committee F16.03, ASTM BOS Volume 01.08.
  • F2389 - Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems has been revised to F2389-15 developed by Committee F17.61, ASTM BOS Volume 08.04.
  • F2435 - Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe has been revised to F2435-15 developed by Committee F17.11, ASTM BOS Volume 08.04.
  • F2482 - Standard Specification for Load-Indicating Externally Threaded Fasteners has been reapproved, available as F2482-08(2015) developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F2507 - Standard Specification for Recreational Airpark Design has been revised to F2507-15 developed by Committee F37.70, ASTM BOS Volume 15.11.
  • F2571 - Standard Test Methods for Evaluating Design and Performance Characteristics of Fitness Equipment has been revised to F2571-15 developed by Committee F08.30, ASTM BOS Volume 15.07.
  • F2576 - Standard Terminology Relating to Declarable Substances in Materials has been revised to F2576-15a developed by Committee F40.91, ASTM BOS Volume 10.04.
  • F2641 - Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes has been reapproved, available as F2641-08(2015) developed by Committee F15.58, ASTM BOS Volume 15.11.
  • F2642 - Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes has been reapproved, available as F2642-08(2015) developed by Committee F15.58, ASTM BOS Volume 15.11.
  • F2643 - Standard Specification for Powered Pot, Pan and Utensil Washing Sinks has been revised to F2643-15 developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F2653 - Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders has been reapproved, available as F2653-11(2015) developed by Committee F08.24, ASTM BOS Volume 15.07.
  • F2663 - Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires has been revised (with title change) to F2663-15 developed by Committee F09.30, ASTM BOS Volume 09.02.
  • F2679 - Standard Specification for 6 mm Projectiles Used with Airsoft Guns has been editorially changed, available as F2679-15e1 developed by Committee F08.27, ASTM BOS Volume 15.07.
  • F2801 - Standard Practice for Paintball Player Safety Briefing has been reapproved, available as developed by Committee F08.24, ASTM BOS Volume 15.07.
  • F2814 - Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes has been reapproved, available as F2814-09(2015) developed by Committee F14.50, ASTM BOS Volume 01.06.
  • F2891 - Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated has been revised to F2891-15 developed by Committee F26.03, ASTM BOS Volume 15.12.
  • F2904 - Standard Specification for Warnings on Paintball Marker Accessories Used In the Sport of Paintball has been reapproved, available as developed by Committee F08.24, ASTM BOS Volume 15.07.
  • F2930 - Standard Guide for Compliance with Light Sport Aircraft Standards has been revised to F2930-15 developed by Committee F37.70, ASTM BOS Volume 15.11.
  • F2992/F2992M - Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment is a new standard, now available. developed by Committee F23.20, ASTM BOS Volume 11.03.
  • F3037 - Standard Guide for Clinical Trial Design for Hip Replacement Systems (HRSs) is a new standard, now available. F3037-15 developed by Committee F04.39, ASTM BOS Volume 13.02.
  • F3062/F3062M - Standard Specification for Installation of Powerplant Systems is a new standard, now available. F3062/F3062M-15 developed by Committee F44.40, ASTM BOS Volume 15.11.
  • F3063/F3063M - Standard Specification for Design and Integration of Fuel/Energy Storage and Delivery System Installations for Aeroplanes is a new standard, now available. F3063/F3063M-15 developed by Committee F44.40, ASTM BOS Volume 15.11.
  • F3066/F3066M - Standard Specification for Powerplant Systems Specific Hazard Mitigation is a new standard, now available. developed by Committee F44.40, ASTM BOS Volume 15.11.
  • F3078 - Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF) is a new standard, now available. F3078-15 developed by Committee F40.01, ASTM BOS Volume 10.04.
  • F3083/F3083M - Standard Specification for Emergency Conditions, Occupant Safety and Accommodations is a new standard, now available. F3083/F3083M-15 developed by Committee F44.30, ASTM BOS Volume 15.11.
  • F3087 - Standard Specification for Acrylic Molding Resins for Medical Implant Applications is a new standard, now available. F3087-15 developed by Committee F04.11, ASTM BOS Volume 13.02.
  • F3093/F3093M - Standard Specification for Aeroelasticity Requirements is a new standard, now available. F3093/F3093M-15 developed by Committee F44.30, ASTM BOS Volume 15.11.
  • F3115/F3115M - Standard Specification for Structural Durability for Small Airplanes is a new standard, now available. F3115/F3115M-15 developed by Committee F44.30, ASTM BOS Volume 15.11.
  • F3144 - Standard Guide for Evaluating Trailing Search Dog Crews or Teams is a new standard, now available. F3144-15 developed by Committee F32.02, ASTM BOS Volume 13.02.
  • F3148 - Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions is a new standard, now available. F3148-15 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F3149 - Standard Practice for Determining the Maintenance Factor (m) and Yield Factor (y) Loading Constants Applicable to Gasket Materials and Designs is a new standard, now available. F3149-15 developed by Committee F03.40, ASTM BOS Volume 09.02.
  • F3152 - Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Norman Tool “WA-1010 Wet Abrader” is a new standard, now available. F3152-15 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F3153 - Standard Specification for Verification of Avionics Systems is a new standard, now available. F3153-15 developed by Committee F39.03, ASTM BOS Volume 15.11.

Published in international.