ISO publications

Here are recent new publications from the International Organization for Standardization (ISO). Hard copy and PDF formats of ISO standards are available for purchase from our website www.standards.co.nz by entering the standard number.

  • ISO 289-1:2015 (Edition 4) Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity
  • ISO 3379:2015 (Edition 2) Leather. Determination of distension and strength of surface (Ball burst method)
  • ISO 3380:2015 (Edition 3) Leather. Physical and mechanical tests. Determination of shrinkage temperature up to 100ºC
  • ISO 3630-3:2015 (Edition 2) Dentistry. Endodontic instruments. Compactors: pluggers and spreaders
  • ISO 4210-2:2015 (Edition 2) Cycles. Safety requirements for bicycles. Requirements for city and trekking, young adult, mountain and racing bicycles
  • ISO 4210-6:2015 (Edition 2) Cycles. Safety requirements for bicycles. Frame and fork test methods
  • ISO 4347:2015 (Edition 5) Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths
  • ISO 5131:2015 (Edition 3) Tractors for agriculture and forestry. Measurement of noise at the operator’s position. Survey method
  • ISO 6020-3:2015 (Edition 2) Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series with bores from 250 mm to 500 mm
  • ISO 6042:2015 (Edition 3) Ships and marine technology. Weathertight single-leaf steel doors
  • ISO 6142-1:2015 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures
  • ISO 6469-4:2015 Electrically propelled road vehicles. Safety specifications. Post crash electrical safety
  • ISO 6535:2015 (Edition 4) Portable chain-saws. Chain brake performance
  • ISO 6848:2015 (Edition 3) Arc welding and cutting. Non-consumable tungsten electrodes. Classification
  • ISO 6874:2015 (Edition 3) Dentistry. Polymer-based pit and fissure sealants
  • ISO 8044:2015 (Edition 4) Corrosion of metals and alloys. Basic terms and definitions
  • ISO 8623:2015 (Edition 2) Tall-oil fatty acids for paints and varnishes. Test methods and characteristic values
  • ISO 9934-1:2015 (Edition 2) Non-destructive testing. Magnetic particle testing. General principles
  • ISO 9934-2:2015 (Edition 2) Non-destructive testing. Magnetic particle testing. Detection media
  • ISO 9934-3:2015 (Edition 2) Non-destructive testing. Magnetic particle testing. Equipment
  • ISO 9972:2015 (Edition 3) Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
  • ISO/IEC/IEEE 8802-11:2012 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. WirelessLAN medium access control (MAC) and physical layer (PHY) specifications
    AMENDMENT 4:September 2015
  • ISO/IEC/IEEE 8802-11:2012 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. WirelessLAN medium access control (MAC) and physical layer (PHY) specifications
    AMENDMENT 5:September 2015
  • ISO 11085:2015 (Edition 2) Cereals, cereals-based products and animal feeding stuffs. Determination of crude fat and total fat content by the Randall extraction method
  • ISO 11357-7:2015 (Edition 2) Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
  • ISO 11618:2015 Buildings and Civil Engineering Works. Sealants. Classification and requirements for pedestrian walkway sealants
  • ISO/TR 11651:2015 Estimation of sediment deposition in reservoir using one dimensional simulation models
  • ISO 13397-5:2015 Dentistry. Periodontal curettes, dental scalers and excavators. Jacquette scalers
  • ISO 13926-2:2011 Pen systems. Plunger stoppers for pen-injectors for medical use
    AMENDMENT 1:August 2015
  • ISO 14253-5:2015 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Uncertainty in verification testing of indicating measuring instruments
  • ISO/IEC 14496-3:2009 Information technology. Coding of audio-visual objects. Audio
    AMENDMENT 5:August 2015
  • ISO/IEC 14496-5:2001 Information technology. Coding of audio-visual objects. Reference software
    AMENDMENT 32:August 2015
    AMENDMENT 35:August 2015
  • ISO/TS 14907-1:2015 (Edition 3) Electronic fee collection. Test procedures for user and fixed equipment. Description of test procedures
  • ISO 15156-1:2015 (Edition 3) Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. General principles for selection of cracking-resistant materials
  • ISO 15156-2:2015 (Edition 3) Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant carbon and low-alloy steels, and the use of cast irons
  • ISO 15156-3:2015 (Edition 3) Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
  • ISO/IEC 15426-2:2015 (Edition 2) Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification. Two dimensional symbols
  • ISO 15928-1:2015 (Edition 2) Houses. Description of performance. Structural safety
  • ISO 15928-2:2015 (Edition 2) Houses. Description of performance. Structural serviceability
  • ISO 15928-3:2015 (Edition 2) Houses. Description of performance. Structural durability
  • ISO/IEC 15938-13:2015 Information technology. Multimedia content description interface. Compact descriptors for visual search
  • ISO 16408:2015 (Edition 2) Dentistry. Oral care products. Oral rinses
  • ISO 16558-1:2015 Soil quality. Risk-based petroleum hydrocarbons. Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)
  • ISO/TS 16558-2:2015 Soil quality. Risk-based petroleum hydrocarbons. Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID)
  • ISO 16598:2015 Timber structures. Structural classification for sawn timber
  • ISO 16733-1:2015 Fire safety engineering. Selection of design fire scenarios and design fires. Selection of design fire scenarios
  • ISO 16741:2015 Traceability of crustacean products. Specifications on the information to be recorded in farmed crustacean distribution chains
  • ISO 17235:2015 (Edition 3) Leather. Physical and mechanical tests. Determination of softness
  • ISO 17515-1:2015 Intelligent transport systems. Communications access for land mobiles (CALM). Evolved Universal Terrestrial Radio Access Network (EUTRAN). General usage
  • ISO 17604:2015 (Edition 2) Microbiology of the food chain. Carcass sampling for microbiological analysis
  • ISO 17608:2015 Textiles. Bare elastane yarns. Determination of resistance to chlorinated water (swimming-pool water)
  • ISO 17742:2015 Energy efficiency and savings calculation for countries, regions and cities
  • ISO 17859:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of piezoelectric strain at high electric field
  • ISO 17871:2015 Gas cylinders. Quick-release cylinder valves. Specification and type testing
  • ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
  • ISO 17939:2015 Ships and marine technology. Oil tank hatches
  • ISO 17940:2015 Ships and marine technology. Hinged watertight doors
  • ISO 18134-1:2015 Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Reference method
  • ISO 18134-2:2015 Solid biofuels. Determination of moisture content. Oven dry method. Total moisture. Simplified method
  • ISO 18134-3:2015 Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
  • ISO 18191:2015 Water quality. Determination of pHt in sea water. Method using the indicator dye m-cresol purple
  • ISO 18217:2015 Safety of woodworking machines. Edgebanding machines fed by chain(s)
  • ISO 18263-1:2015 Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging. Designation system and basis for specification
  • ISO 18423:2015 (Edition 2) Space data and information transfer systems. Pseudo-Noise (PN) Ranging Systems
  • ISO 18489:2015 Polyethylene (PE) materials for piping systems. Determination of resistance to slow crack growth under cyclic loading. Cracked Round Bar test method
  • ISO 18539:2015 Traceability of molluscan products. Specifications on the information to be recorded in captured molluscan distribution chains
  • ISO/TS 18684:2015 Timekeeping instruments. Watch external parts made of hard materials. General requirements and test methods
  • ISO 19043:2015 Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
  • ISO 19055:2015 Microscopes. Minimum requirements for binocular tubes
  • ISO 19074:2015 Leather. Physical and mechanical tests. Determination of water absorption by capillary action (wicking)
  • ISO/TR 19300:2015 Graphic technology. Guidelines for the use of standards for print media production
  • ISO/TR 19473:2015 Space systems. Best practices for orbit elements at payload. LV separation
  • ISO 19631:2015 Aerospace series. Tube fittings for fluid systems, 5 080 psi (35 000 kPa). Qualification specification
  • ISO 19702:2015 (Edition 2) Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
  • ISO/IEC 19785-1:2015 (Edition 2) Information technology. Common Biometric Exchange Formats Framework. Data element specification
  • ISO/IEC 19785-3:2015(Edition 2) Information technology. Common Biometric Exchange Formats Framework. Patron format specifications
  • ISO 19973-2:2015 (Edition 2) Pneumatic fluid power. Assessment of component reliability by testing. Directional control valves
  • ISO 19973-3:2015 (Edition 2) Pneumatic fluid power. Assessment of component reliability by testing. Cylinders with piston rod
  • ISO 19973-5:2015 Pneumatic fluid power. Assessment of component reliability by testing. Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
  • ISO 20104:2015 Space data and information transfer systems. Producer-Archive Interface Specification (PAIS)
  • ISO 20105:2015 Space data and information transfer systems. Operation of CFDP over encapsulation service
  • ISO 20106:2015 Space data and information transfer systems. Mission operations common object model
  • ISO 20107:2015 Space data and information transfer systems. Spacecraft onboard interface services. Device virtualization service
  • ISO 20205:2015 Space data and information transfer systems. Spacecraft Onboard Interface Systems. Low Data-Rate Wireless Communications for Spacecraft Monitoring and Control
  • ISO 20206:2015 Space data and information transfer systems. IP over CCSDS space links
  • ISO 20207:2015 Space data and information transfer systems. CCSDS Space Link Protocols over ETSI DVB-S2 Standard
  • ISO 20208:2015 Space data and information transfer systems. Delta-DOR Raw Data Exchange Format
  • ISO 20210:2015 Space data and information transfer systems. Mission Operations Message Abstraction Layer. JAVA API
  • ISO 20211:2015 Space data and information transfer systems. Spacecraft Onboard Interface Services. Device Access Service
  • ISO 20213:2015 Space data and information transfer systems. Spacecraft onboard interface services. Message transfer service
  • ISO 20214:2015 Space data and information transfer systems. Security architecture for space data systems
  • ISO 20215:2015 Space data and information transfer systems. CCSDS cryptographic algorithms
  • ISO 20216:2015 Space data and information transfer systems. Spacecraft onboard interface services. Device data pooling service
  • ISO 20217:2015 Space data and information transfer systems. Spacecraft onboard interface services. File and packet store services
  • ISO 20844:2015 Petroleum and related products. Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
  • ISO 21459:2015 (Edition 2) Space data and information transfer systems. Proximity-1 space link protocol. Coding and synchronization sublayer
  • ISO 21460:2015 (Edition 3) Space data and information transfer systems. Proximity-1 space link protocol. Physical layer
  • ISO/TR 22351:2015 Societal security. Emergency management. Message structure for exchange of information
  • ISO 22663:2015 (Edition 3) Space data and information transfer systems. Proximity-1 space link protocol. Data link layer
  • ISO/IEC 23001-10:2015 Information technology. MPEG systems technologies. Carriage of timed metadata metrics of media in ISO base media file format
  • ISO/IEC 23003-1:2007/A1:2008 Information technology. MPEG audio technologies. MPEG Surround
    CORRIGENDUM 3:September 2015
  • ISO 23671:2015 (Edition 2) Passenger car tyres. Method for measuring relative wet grip performance. Loaded new tyres
  • ISO 25619-2:2015 (Edition 2) Geosynthetics. Determination of compression behaviour. Determination of short-term compression behaviour
  • ISO 28927-5:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Drills and impact drills
    AMENDMENT 1:August 2015
  • ISO/IEC 29170-2:2015 Information technology. Advanced image coding and evaluation. Evaluation procedure for nearly lossless coding
  • ISO 80601-2-72:2015 Medical electrical equipment. Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients

Published in international.