British publications

Here are recent publications from the British Standards Institution (BSI), together with announcements of supersession and withdrawal. Hard copy and PDF formats of BSI standards are available for purchase from our website www.standards.co.nz by entering the standard number.

British standards

The publications listed below are new and revised British standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British standards withdrawn’ section.

  • BS 1881-124:2015 Testing concrete. Methods for analysis of hardened concrete
    Supersedes BS 1881-124:1988
  • BS 7629-1:2015 Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire. Multicore cables
    Supersedes BS 7629-1:2008 which remains current
  • BS 7958:2015 Closed circuit television (CCTV). Management and operation. Code of practice
    Supersedes BS 7958:2009
  • BS 8081:2015 Code of practice for grouted anchors
    Supersedes BS 8081:1989
  • BS 8597:2015 Steels for the reinforcement of concrete. Reinforcement couplers. Requirements and test methods

BS EN standards

The following are British standard implementations of the English language versions of European standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN 49-2:2015 Wood preservatives. Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Application by impregnation (Laboratory method)
    Supersedes BS EN 49-2:2005
  • BS EN 116:2015 (BS 2000-309:2015) Diesel and domestic heating fuels. Determination of cold filter plugging point. Stepwise cooling bath method
    Supersedes BS EN 116:1998
  • BS EN 536:2015 Road construction machines. Mixing plants for road construction materials. Safety requirements
    Supersedes BS EN 536:1999
  • BS EN 556-2:2015 Sterilization of medical devices. Requirements for medical devices to be designated “STERILE”. Requirements for aseptically processed medical devices
    Supersedes BS EN 556-2:2003
  • BS EN 764-1:2015 Pressure equipment. Vocabulary
    Supersedes BS EN 764-1:2004 and BS EN 764-3:2002
  • BS EN 1397:2015 Heat exchangers. Hydronic room fan coil units. Test procedures for establishing the performance
    Supersedes BS EN 1397:1999
  • BS EN 1610:2015 Construction and testing of drains and sewers
    Supersedes BS EN 1610:1998
  • BS EN 1674:2015 Food processing machinery. Dough sheeters. Safety and hygiene requirements
    Supersedes BS EN 1674:2000+A1:2009
  • BS EN 1754:2015 Magnesium and magnesium alloys. Designation system for anodes, ingots and castings. Material symbols and material numbers
    Supersedes BS EN 1754:1997
  • BS EN 2235:2015 Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification
    Supersedes BS EN 2235:2006
  • BS EN 2591-227:2015 Aerospace series. Elements of electrical and optical connection. Test methods. Partial discharges test
  • BS EN 3375-011:2015 Aerospace series. Cable, electrical, for digital data transmission. Single braid. Star Quad 100 ohms. Light weight. Type KL. Product standard
  • BS EN ISO 3826-4:2015 Plastics collapsible containers for human blood and blood components. Aphaeresis blood bag systems with integrated features
  • BS EN ISO 4823:2015 Dentistry. Elastomeric impression materials
    Supersedes BS EN ISO 4823:2000+A1:2007
  • BS EN ISO 6743-4:2015 Lubricants, industrial oils and related products (class L). Classification. Family H (Hydraulic systems)
    Supersedes BS EN ISO 6743-4:2001
  • BS EN 9101:2015 Quality Management Systems. Audit Requirements for Aviation, Space, and Defence Organisations
    Supersedes BS EN 9101:2011
  • BS EN ISO 9972:2015 Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
    Supersedes BS EN 13829:2001
  • BS EN 10251:2015 Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip
    Supersedes BS EN 10251:1997
  • BS EN 10330:2015 Magnetic materials. Method of measurement of the coercivity of magnetic materials in an open magnetic circuit
    Supersedes BS EN 10330:2003
  • BS EN ISO 11268-1:2015 Soil quality. Effects of pollutants on earthworms. Determination of acute toxicity to Eisenia fetida/Eisenia Andrei
    Supersedes BS 7755-4.2.1:1994
  • BS EN ISO 11268-2:2015 Soil quality. Effects of pollutants on earthworms. Determination of effects on reproduction of Eisenia fetida/Eisenia Andrei
    Supersedes BS 7755-4.2.2:1998
  • BS EN ISO 11855-1:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Definition, symbols, and comfort criteria
    Supersedes BS EN 15377-1:2008
  • BS EN ISO 11855-2:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Determination of the design heating and cooling capacity
  • BS EN ISO 11855-3:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Design and dimensioning
  • BS EN ISO 11855-4:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)
    Supersedes BS EN 15377-3:2007
  • BS EN ISO 11855-5:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Installation
  • BS EN 12101-3:2015 Smoke and heat control systems. Specification for powered smoke and heat control ventilators (Fans)
    Supersedes BS EN 12101-3:2002
  • BS EN 12331:2015 Food processing machinery. Mincing machines. Safety and hygiene requirements
    Supersedes BS EN 12331:2003+A2:2010
  • BS EN 12390-11:2015 Testing hardened concrete. Determination of the chloride resistance of concrete, unidirectional diffusion
    Supersedes DD CEN/TS 12390-11:2010
  • BS EN 12882:2015 Conveyor belts for general purpose use. Electrical and flammability safety requirements
    Supersedes BS EN 12882:2008
  • BS EN ISO 13162:2015 Water quality. Determination of carbon 14 activity. Liquid scintillation counting method
  • BS EN ISO 13408-1:2015 Aseptic processing of health care products. General requirements
    Supersedes BS EN ISO 13408-1:2011+A1:2013
  • BS EN 13594:2015 Protective gloves for motorcycle riders. Requirements and test methods
    Supersedes BS EN 13594:2002
  • BS EN ISO 13702:2015 Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
    Supersedes BS EN ISO 13702:1999
  • BS EN 13718-2:2015 Medical vehicles and their equipment. Air ambulances. Operational and technical requirements for air ambulances
    Supersedes BS EN 13718-2:2008
  • BS EN 13870:2015 Food processing machinery. Portion cutting machines. Safety and hygiene requirements
    Supersedes BS EN 13870:2005+A1:2010
  • BS EN 14885:2015 Chemical disinfectants and antiseptics. Application of European Standards for chemical disinfectants and antiseptics
    Supersedes BS EN 14885:2006
  • BS EN 15430-1:2015 Winter and road service area maintenance equipment. Data acquisition and transmission. In-vehicle data acquisition
    Supersedes BS EN 15430-1:2007+A1:2011
  • BS EN 15531-1:2015 Public transport. Service interface for real-time information relating to public transport operations. Context and framework
    Supersedes DD CEN/TS 15531-1:2007
  • BS EN 15531-2:2015 Public transport. Service interface for real-time information relating to public transport operations. Communications
    Supersedes DD CEN/TS 15531-2:2007
  • BS EN 15531-3:2015 Public transport. Service interface for real-time information relating to public transport operations. Functional service interfaces
    Supersedes DD CEN/TS 15531-3:2007
  • BS EN 15572:2015 Machines and plants for mining and tooling of natural stone. Safety. Requirements for edge finishing machines
  • BS EN 15698-2:2015 District heating pipes. Preinsulated bonded twin pipe systems for directly buried hot water networks. Fitting and valve assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
  • BS EN 16247-5:2015 Energy audits. Competence of energy auditors
  • BS EN ISO 16408:2015 Dentistry. Oral care products. Oral rinses
    Supersedes BS EN ISO 16408:2004
  • BS EN 16454:2015 Intelligent transport systems. ESafety. ECall end to end conformance testing
    Supersedes PD CEN/TS 16454:2013
  • BS EN 16580:2015 Windows and doors. Wetness and splash water proof door leaves. Test and classification
  • BS EN 16582-1:2015 Domestic swimming pools. General requirements including safety and test methods
  • BS EN 16582-2:2015 Domestic swimming pools. Specific requirements including safety and test methods for inground pools
  • BS EN 16582-3:2015 Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools
  • BS EN 16583:2015 Heat exchangers. Hydronic room fan coils units. Determination of the sound power level
  • BS EN 16602-60-13:2015 Space product assurance. Requirements for the use of COTS components
  • BS EN 16602-60:2015 Space product assurance. Electrical, electronic and electromechanical (EEE) components
  • BS EN 16616:2015 Chemical disinfectants and antiseptics. Chemical-thermal textile disinfection. Test method and requirements (phase 2, step 2)
  • BS EN 16648:2015 Conservation of cultural heritage. Transport methods
  • BS EN ISO 16671:2015 Ophthalmic implants. Irrigating solutions for ophthalmic surgery
    Supersedes BS EN ISO 16671:2003
  • BS EN ISO 16672:2015 Ophthalmic implants. Ocular endotamponades
    Supersedes BS EN ISO 16672:2003
  • BS EN 16695:2015 Water quality. Guidance on the estimation of phytoplankton biovolume
  • BS EN 16712-3:2015 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable foam equipment. Low and medium expansion hand-held foam branchpipes PN 16
  • BS EN 16715:2015 Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
  • BS EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks
  • BS EN ISO 17628:2015 Geotechnical investigation and testing. Geothermal testing. Determination of thermal conductivity of soil and rock using a borehole heat exchanger
  • BS EN ISO 17634:2015 Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creepresisting steels. Classification
    Supersedes BS EN ISO 17634:2006
  • BS EN ISO 17871:2015 Gas cylinders. Quick-release cylinder valves. Specification and type testing
  • BS EN ISO 18217:2015 Safety of woodworking machines. Edgebanding machines fed by chain(s)
    Supersedes BS EN 1218-4:2004+A2:2009
  • BS EN ISO 19901-8:2015 Petroleum and natural gas industries. Specific requirements for offshore structures. Marine soil investigations
  • BS EN ISO 22007-2:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
    Supersedes BS EN ISO 22007-2:2012
  • BS EN ISO 23747:2015 Anaesthetic and respiratory equipment. Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
    Supersedes BS EN ISO 23747:2009
  • BS EN ISO 24817:2015 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
    Supersedes DD CEN ISO/TS 24817:2011
  • BS EN ISO 25619-2:2015 Geosynthetics. Determination of compression behaviour. Determination of short-term compression behaviour
    Supersedes BS EN ISO 25619-2:2008
  • BS EN 50090-4-3:2015 Home and Building Electronic Systems (HBES). Media independent layers. Communication over IP (EN 13321-2)
    Supersedes BS EN 50090-4-3:2007
  • BS EN 50502:2015 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
    Supersedes DD CLC/TS 50502:2008
  • BS EN 50632-1:2015 Electric motor-operated tools. Dust measurement procedure. General requirements
  • BS EN 50632-2-1:2015 Electric motor-operated tools. Dust measurement procedure. Particular requirements for diamond core drills
  • BS EN 50632-2-6:2015 Electric motor-operated tools. Dust measurement procedure. Particular requirements for hammers
  • BS EN 50632-2-22:2015 Electric motor-operated tools. Dust measurement procedure. Particular requirements for cut-off machines and wall chasers
  • BS EN 60118-0:2015 Electroacoustics. Hearing aids. Measurement of the performance characteristics of hearing aids
    Supersedes BS EN 60118-0:1993, BS EN 60118-1:1995, BS EN 60118-2:1996 and BS EN 60118-6:1999 (Edition 2)
  • BS EN 62150-3:2015 Fibre optic active components and devices. Test and measurement procedures. Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces
    Supersedes BS EN 62150-3:2012
  • BS EN 62379-7:2015 Common control interface for networked digital audio and video products. Measurements
  • BS EN 62756-1:2015 Digital load side transmission lighting control. Basic requirements

BS ENs implemented by amendment

  • BS EN ISO 10704:2015 Water quality. Measurement of gross alpha and gross beta activity in non-saline water. Thin source deposit method|
    Implementation of European Standard EN ISO 10704 by amendment to BS ISO 10704:2009
  • BS EN ISO 11268-3:2015 Soil quality. Effects of pollutants on earthworms. Guidance on the determination of effects in field situations
    Implementation of European Standard EN ISO 11268-3 by amendment to BS ISO 11268-3:2014
  • BS EN ISO 11704:2015 Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method
    Implementation of European Standard EN ISO 11704by amendment to BS ISO 11704:2010
  • BS EN ISO 12759:2015 Fans. Efficiency classification for fans
    Implementation of European Standard EN ISO 12759 by amendment to BS ISO 12759:2010+A1:2013
  • BS EN ISO 13408-7:2015 Aseptic processing of health care products. Alternative processes for medical devices and combination products
    Implementation of European Standard EN ISO 13408-7 by amendment to BS ISO 13408-7:2012
  • BS EN ISO 15118-1:2015 Road vehicles. Vehicle to grid communication interface. General information and use-case definition
    Implementation of European Standard EN ISO 15118-1 by amendment to BS ISO 15118-1:2013

BS implementations

BS implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
  • BS ISO 789-3:2015 Agricultural tractors. Test procedures. Turning and clearance diameters
    Supersedes BS 6347-3:1983
  • BS ISO 1122-2:1999 Vocabulary of gear terms. Definitions related to worm gear geometry
  • BS ISO 3271:2015 Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices
    Supersedes BS ISO 3271:2007
  • BS ISO 3894:2015 Road vehicles. Wheels/rims for commercial vehicles. Test methods
    Supersedes BS ISO 3894:2005
  • BS ISO 4217:2015 Codes for the representation of currencies
    Supersedes BS ISO 4217:2008
  • BS ISO 4695:2015 Iron ores for blast furnace feedstocks. Determination of the reducibility by the rate of reduction index
    Supersedes BS ISO 4695:2007
  • BS ISO 4696-1:2015 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction disintegration indices by static method. Reduction with CO, CO2, H2 and N2
    Supersedes BS ISO 4696-1:2007
  • BS ISO 4696-2:2015 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction disintegration indices by static method. Reduction with CO and N2
    Supersedes BS ISO 4696-2:2007
  • BS ISO 4700:2015 Iron ore pellets for blast furnace and direct reduction feedstocks. Determination of the crushing strength
    Supersedes BS ISO 4700:2007
  • BS ISO 6020-2:2015 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series
    Supersedes BS ISO 6020-2:2006
  • BS ISO 6123-1:2015 Rubber or plastics covered rollers. Specifications. Requirements for hardness
    Supersedes BS 7442-4.1:1992
  • BS ISO 6133:2015 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
    Supersedes BS ISO 6133:1998
  • BS ISO 6432:2015 Pneumatic fluid power. Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm. Basic and mounting dimensions
    Supersedes BS ISO 6432:1985
  • BS ISO 6469-4:2015 Electrically propelled road vehicles. Safety specifications. Post crash electrical safety
  • BS ISO 7215:2015 Iron ores for blast furnace feedstocks. Determination of the reducibility by the final degree of reduction index
    Supersedes BS ISO 7215:2007
  • BS ISO 7229:2015 Rubber- or plastics-coated fabrics. Measurement of gas permeability
    Supersedes BS ISO 7229:1997
  • BS ISO 7250-3:2015 Basic human body measurements for technological design. Worldwide and regional design ranges for use in product standards
  • BS ISO/IEC 7812-1:2015 Identification cards. Identification of issuers. Numbering system
    Supersedes BS ISO/IEC 7812-1:2006
  • BS ISO/IEC 7812-2:2015 Identification cards. Identification of issuers. Application and registration procedures
    Supersedes BS ISO/IEC 7812-2:2007
  • BS ISO 7992:2015 Iron ores for blast furnace feedstocks. Determination of reduction under load
    Supersedes BS ISO 7992:2007
  • BS ISO 8178-8:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination
    Supersedes BS ISO 8178-8:1996
  • BS ISO 8371:2015 Iron ores for blast furnace feedstocks. Determination of the decrepitation index
    Supersedes BS ISO 8371:2007
  • BS ISO 9940:2015 Aerospace series. Fluid, hydraulic, phosphate ester-base, fire resistant. Technical specification
  • BS ISO 11110:2015 Winter-sports equipment. Test devices for the setting of the functional unit ski/boot/binding. Requirements and tests
  • BS ISO/IEC 11179-6:2015 Information technology. Metadata registries (MDR). Registration
  • BS ISO 11256:2015 Iron ore pellets for shaft direct-reduction feedstocks. Determination of the clustering index
    Supersedes BS ISO 11256:2007
  • BS ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
    Supersedes BS ISO 11257:2007
  • BS ISO 11258:2015 Iron ores for shaft direct-reduction feedstocks. Determination of the reducibility index, final degree of reduction and degree of metallization
    Supersedes BS ISO 11258:2007
  • BS ISO/IEC 11770-3:2015 Information technology. Security techniques. Key management. Mechanisms using asymmetric techniques
    Supersedes BS ISO/IEC 11770-3:2008
  • BS ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection. Vocabulary. Dosimetry for radiation processing
  • BS ISO 13007-5:2015 Ceramic tiles. Grouts and adhesives. Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives
  • BS ISO 13083:2015 Surface chemical analysis. Scanning probe microscopy. Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
  • BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
    Supersedes BS ISO 13528:2005
  • BS ISO 13930:2015 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction disintegration indices by dynamic method
    Supersedes BS ISO 13930:2007
  • BS ISO 13948-1:2015 Diesel engines. Fuel injection pumps and fuel injector low-pressure connections. Threaded connections
  • BS ISO 14861:2015 Graphic technology. Requirements for colour soft proofing systems
  • BS ISO 15031-5:2015 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Emissions-related diagnostic services
    Supersedes BS ISO 15031-5:2011
  • BS ISO 15031-6:2015 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Diagnostic trouble code definitions
    Supersedes BS ISO 15031-6:2010
  • BS ISO 15634:2015 Iron ores. Determination of chromium content. Flame atomic absorption spectrometric method
    Supersedes BS ISO 15634:2005
  • BS ISO 15733:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure. Determination of tensile properties
  • BS ISO/IEC 15938-13:2015 Information technology. Multimedia content description interface. Compact descriptors for visual search
  • BS ISO 16075-1:2015 Guidelines for treated wastewater use for irrigation projects. The basis of a reuse project for irrigation
  • BS ISO 16075-2:2015 Guidelines for treated wastewater use for irrigation projects. Development of the project
  • BS ISO 16075-3:2015 Guidelines for treated wastewater use for irrigation projects. Components of a reuse project for irrigation
  • BS ISO 16130:2015 Aerospace series. Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)
  • BS ISO/IEC 16480:2015 Information technology. Automatic identification and data capture techniques. Reading and display of ORM by mobile devices
  • BS ISO 16616:2015 Test methods for natural fibre-reinforced plastic composite (NFC) deck boards
  • BS ISO 16741:2015 Traceability of crustacean products. Specifications on the information to be recorded in farmed crustacean distribution chains
  • BS ISO 16779:2015 Sensory analysis. Assessment (determination and verification) of the shelf life of foodstuffs
  • BS ISO 17109:2015 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy. Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
  • BS ISO 17211:2015 Stationary source emissions. Sampling and determination of selenium compounds in flue gas
  • BS ISO 17447-1:2015 Road Vehicles. Glow-plugs with conical seating and their cylinder head housing. Basic characteristics and dimensions for metal-sheath type glow-plugs
    Supersedes BS AU 262-1:1995, BS AU 262-2:1995, BS ISO 6550-3:2009, BS ISO 6550-4:2009 and BS ISO 7578:2008
  • BS ISO 17447-2:2015 Road Vehicles. Glow-plugs with conical seating and their cylinder head housing. Basic characteristics and dimensions for ceramic sheath-type glow-plugs
    Supersedes BS AU 262-1:1995, BS AU 262-2:1995, BS ISO 6550-3:2009, BS ISO 6550-4:2009 and BS ISO 7578:2008
  • BS ISO 17447-3:2015 Road Vehicles. Glow-plugs with conical seating and their cylinder head housing. Tests and requirements
    Supersedes BS AU 262-1:1995, BS AU 262-2:1995, BS ISO 6550-3:2009, BS ISO 6550-4:2009 and BS ISO 7578:2008
  • BS ISO 17515-1:2015 Intelligent transport systems. Communications access for land mobiles (CALM). Evolved Universal Terrestrial Radio Access Network (EUTRAN). General usage
  • BS ISO 17780:2015 Animal and vegetable fats and oils. Determination of aliphatic hydrocarbons in vegetable oils
  • BS ISO 17840-1:2015 Road vehicles. Information for first and second responders. Rescue sheet for passenger cars and light commercial vehicles
  • BS ISO 17841:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate
  • BS ISO 17885:2015 Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
    Supersedes BS ISO 10838-1:2000, BS ISO 10838-2:2000 and BS ISO 10838-3:2001
  • BS ISO 18263-1:2015 Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging. Designation system and basis for specification
  • BS ISO 18363-1:2015 Animal and vegetable fats and oils. Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS. Method using fast alkaline transesterification and measurement for 3-MCPD and differential measurement for glycidol
  • BS ISO 18383:2015 Photography. Digital cameras. Specification guideline
  • BS ISO 18435-3:2015 Industrial automation systems and integration. Diagnostics, capability assessment and maintenance applications integration. Applications integration description method
  • BS ISO 18473-1:2015 Functional pigments and extenders for special applications. Nanoscale calcium carbonate for sealant application
  • BS ISO 18473-2:2015 Functional pigments and extenders for special applications. Nanoscale titanium dioxide for sunscreen application
  • BS ISO 18488:2015 Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method
  • BS ISO 18489:2015 Polyethylene (PE) materials for piping systems. Determination of resistance to slow crack growth under cyclic loading. Cracked Round Bar test method
  • BS ISO 18538:2015 Traceability of molluscan products. Specifications on the information to be recorded in farmed molluscan distribution chains
  • BS ISO 18565:2015 Document management. AFP/Archive
  • BS ISO 18842:2015 Aluminium oxide primarily used for the production of aluminium. Method for the determination of tapped and untapped density
  • BS ISO 19043:2015 Natural rubber latex concentrate. Determination of total phosphate content by spectrophotometric method
  • BS ISO 19055:2015 Microscopes. Minimum requirements for binocular tubes
  • BS ISO 19095-1:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Guidelines for the approach
  • BS ISO 19095-2:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Test specimens
  • BS ISO 19095-3:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Test methods
  • BS ISO 19095-4:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Environmental conditions for durability
  • BS ISO 19136-2:2015 Geographic information. Geography Markup Language (GML). Extended schemas and encoding rules
  • BS ISO 19162:2015 Geographic information. Well-known text representation of coordinate reference systems
  • BS ISO 19272:2015 Low alloyed steel. Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu. Glow discharge optical emission spectrometry (routine method)
  • BS ISO 19631:2015 Aerospace series. Tube fittings for fluid systems, 5 080 psi (35 000 kPa). Qualification specification
  • BS ISO/IEC 19763-5:2015 Information technology. Metamodel framework for interoperability (MFI). Metamodel for process model registration
  • BS ISO/IEC 19763-6:2015 Information technology. Metamodel framework for interoperability (MFI). Registry Summary
  • BS ISO 19973-1:2015 Pneumatic fluid power. Assessment of component reliability by testing. General procedures
    Supersedes BS ISO 19973-1:2007
  • BS ISO 19973-2:2015 Pneumatic fluid power. Assessment of component reliability by testing. Directional control valves
    Supersedes BS ISO 19973-2:2007
  • BS ISO 19973-3:2015 Pneumatic fluid power. Assessment of component reliability by testing. Cylinders with piston rod
    Supersedes BS ISO 19973-3:2007
  • BS ISO 19973-5:2015 Pneumatic fluid power. Assessment of component reliability by testing. Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
  • BS ISO 20685-2:2015 Ergonomics. 3-D scanning methodologies for internationally compatible anthropometric databases. Evaluation protocol of surface shape and repeatability of relative landmark positions
  • BS ISO 21873-1:2015 Building construction machinery and equipment. Mobile crushers. Terminology and commercial specifications
  • BS ISO 22915-24:2015 Industrial trucks. Verification of stability. Slewing variable-reach rough-terrain trucks
  • BS ISO/IEC 23001-8:2013 Information technology. MPEG systems technologies. Coding-independent code points
  • BS ISO 23551-9:2015 Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Mechanical gas thermostats
  • BS ISO 24518:2015 Activities relating to drinking water and wastewater services. Crisis management of water utilities
  • BS ISO/IEC 27033-1:2015 Information technology. Security techniques. Network security. Overview and concepts
    Supersedes BS ISO/IEC 27033-1:2009
  • BS ISO/IEC 27034-2:2015 Information technology. Security techniques. Application security. Organization normative framework
  • BS ISO/IEC 28360:2015 Information technology. Office equipment. Determination of chemical emission rates from electronic equipment
  • BS ISO/IEC 29102:2015 Information technology. Office equipment. Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components
    Supersedes BS ISO/IEC 29102:2011
  • BS ISO/IEC 29170-2:2015 Information technology. Advanced image coding and evaluation. Evaluation procedure for nearly lossless coding
  • BS ISO/IEC 29190:2015 Information technology. Security techniques. Privacy capability assessment model
  • BS ISO/IEC 33063:2015 Information technology. Process assessment. Process assessment model for software testing
  • BS IEC 61935-2-23:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801. Cord and work area cord category 7. Blank detail specification
  • BS IEC 61935-2-24:2015 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801. Cord and work area cord category 7A. Blank detail specification

Published documents

  • PD CEN/TR 1459-6:2015 Rough-terrain trucks. Safety requirements and verification. Application of EN ISO 13849-1 to slewing and non-slewing variable-reach rough terrain truck
  • PD ISO/TR 10828:2015 Worm gears. Worm profiles and gear mesh geometry
    Supersedes BS ISO TR 10828:1997
  • PD ISO/TS 13399-202:2015 Cutting tool data representation and exchange. Creation and exchange of 3D models. Irregular inserts
  • PD CEN/TR 13445-101:2015 Unfired pressure vessels. Example of application
  • PD CEN/TR 13445-102:2015 Unfired pressure vessels. Example of application of vertical vessel with bracket supports
  • PD CEN/TR 15071:2015 Safety of toys. National translations of warnings and instructions for use in the EN 71 series
    Supersedes PD CEN/TR 15071:2014
  • PD ISO/PAS 15339-1:2015 Graphic technology. Printing from digital data across multiple technologies. Principles
  • PD ISO/PAS 15339-2:2015 Graphic technology. Printing from digital data across multiple technologies. Characterized reference printing conditions, CRPC1-CRPC7
  • PD CEN/TR 16741:2015 Textiles and textile products. Guidance on health and environmental issues related to chemical content of textile products intended for clothing, interior textiles and upholstery
  • PD ISO/TS 16780:2015 Water quality. Determination of polychlorinated naphthalenes (PCN). Method using gas chromatography (GC) and mass spectrometry (MS)
  • PD ISO/TR 16786:2015 Intelligent transport systems. The use of simulation models for evaluation of traffic management systems. Input parameters and reporting template for simulation of traffic signal control systems
  • PD CEN/TR 16797-1:2015 Construction products: Assessment of release of dangerous substances. Guidance on the statistical assessment of declared values. Principles and rules of application
  • PD CEN/TR 16797-2:2015 Construction products: Assessment of release of dangerous substances. Guidance on the statistical assessment of declared values. Technical and statistical background
  • PD CEN/TS 16826-1:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for snap frozen tissue. Isolated RNA
  • PD CEN/TS 16826-2:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for snap frozen tissue. Isolated proteins
  • PD CEN/TS 16827-1:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for FFPE tissue. Isolated RNA
  • PD CEN/TS 16827-2:2015 Molecular in vitro diagnostic examinations. Specifications for pre-examination processes for FFPE tissue. Isolated proteins
  • PD CEN/TS 16827-3:2015 Molecular in vitro diagnostic examinations.     Specifications for pre-examination processes for FFPE tissue. Isolated DNA
  • PD ISO/IEC TR 17026:2015 Conformity assessment. Example of a certification scheme for tangible products
    Supersedes PD ISO/IEC GUIDE 28:2004 and PD ISO/IEC GUIDE 53:2005
  • PD ISO/TR 17465-2:2015 Intelligent transport systems. Cooperative ITS. Guidelines for standards documents
  • PD ISO/TR 17465-3:2015 Intelligent transport systems. Cooperative ITS. Release procedures for standards documents
  • PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
  • PD ISO/TR 17522:2015 Health informatics. Provisions for health applications on mobile/smart devices
  • PD ISO/TR 17870-1:2015 Ceramic tiles. Guidelines for installation. Installation of ceramic wall and floor tiles
  • PD ISO/TR 17870-2:2015 Ceramic tiles. Guidelines for installation. Installation of thin ceramic wall and floor tiles and panels
  • PD ISO/TS 17920:2015 Fibre ropes for offshore stationkeeping. Aramid
  • PD ISO/TR 18230:2015 Iron ores. Determination of loss on ignition. Non-oxidised ores
  • PD ISO/TS 19336:2015 Fibre ropes for offshore station keeping. Polyarylate
  • PD ISO/IEC TR 19446:2015 Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications
  • PD ISO/TR 19478-2:2015 ISO and Health Canada intense smoking parameters. Examination of factors contributing to variability in the routine measurement of TPM, water and NFDPM smoke yields of cigarettes
  • PD ISO/TS 19858:2015 Forestry machines. Portable chainsaws. Test method for evaluating saw chain oil lubricity
  • PD ISO/TS 22077-2:2015 Health informatics. Medical waveform format. Electrocardiography
  • PD ISO/TS 22077-3:2015 Health informatics. Medical waveform format. Long term electrocardiography
  • PD ISO/TR 24679-3:2015 Fire safety engineering. Performance of structure in fire. Example of an open car park
  • PD ISO/IEC TR 29196:2015 Guidance for biometric enrolment
  • PD IEC/TS 61400-26-2:2014 Wind turbines. Production-based availability for wind turbines
  • PD IEC/TS 61936-2:2015 Power installations exceeding 1 kV a.c. and 1,5 kV d.c.
  • PD IEC/TR 62131-5:2015 Environmental conditions. Vibration and shock of electrotechnical equipment. Equipment during storage and handling
  • PD IEC/TS 62600-10:2015 Marine energy. Wave, tidal and other water current converters. Assessment of mooring system for marine energy converters (MECs)
  • PD IEC/TS 62600-201:2015 Marine energy. Wave, tidal and other water current converters. Tidal energy resource assessment and characterization
  • PD IEC/TS 62607-4-1:2015 Nanomanufacturing. Key control characteristics. Cathode nanomaterials for nano-enabled electrical energy storage. Electrochemical characterisation, 2-electrode cell method
    Supersedes PD IEC/TS 62607-4-1:2014
  • PD IEC/TS 62607-4-3:2015 Nanomanufacturing. Key control characteristics. Nano-enabled electrical energy storage. Contact and coating resistivity measurements for nanomaterials
  • PD IEC/TS 62804-1:2015 Photovoltaic (PV) modules. Test methods for the detection of potential-induced degradation. Crystalline silicon
  • PD IEC/PAS 62878-2-5:2015 Device embedded substrate. Guidelines. Data format
  • PD ISO GUIDE 33:2015 Reference materials. Good practice in using reference materials
    Supersedes PD 6532-3:2000

Corrigenda to British standards and updated British standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended standards and corrigenda to British standards were made available last month.

  • BS 7430:2011+A1:2015 Code of practice for protective earthing of electrical installations
    AMENDMENT 1
  • BS EN 590:2013 Automotive fuels. Diesel. Requirements and test methods
    CORRIGENDUM 3
  • BS EN 1344:2013 Clay pavers. Requirements and test methods
    CORRIGENDUM 1
  • BS EN ISO 1452-3:2010 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
    CORRIGENDUM 1
  • BS EN 1811:2011+A1:2015 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
    AMENDMENT 1
  • BS EN ISO 3452-5:2008 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
    CORRIGENDUM 1
  • BS EN ISO 3452-6:2008 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10ºC
    CORRIGENDUM 1
  • BS EN ISO 3907:2009 Hardmetals. Determination of total carbon. Gravimetric method
    CORRIGENDUM 1
  • BS EN ISO 5349-2:2001+A1:2015 Mechanical vibration. Measurement and evaluation of human exposure to hand transmitted vibration. Practical guidance for measurement at the workplace
    AMENDMENT 1
  • BS EN ISO 5802:2008+A1:2015 Industrial fans. Performance testing in situ
    AMENDMENT 1
  • BS EN ISO 6498:2012 Animal feeding stuffs. Guidelines for sample preparation
    CORRIGENDUM 1
  • BS EN ISO 9809-3:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Normalized steel cylinders
    CORRIGENDUM 1
  • BS EN ISO 10704:2015 Water quality. Measurement of gross alpha and gross beta activity in non-saline water. Thin source deposit method
    CORRIGENDUM 1
  • BS EN ISO 10819:2013 Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
    CORRIGENDUM 1
  • BS EN ISO 10931:2005+A1:2015 Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Specifications for components and the system
    AMENDMENT 1
  • BS EN ISO 11268-3:2015 Soil quality. Effects of pollutants on earthworms. Guidance on the determination of effects in field situations
    CORRIGENDUM 1
  • BS EN ISO 11704:2015 Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method
    CORRIGENDUM 1
  • BS EN ISO 12759:2015 Fans. Efficiency classification for fans
    CORRIGENDUM 1
  • BS EN ISO 13408-7:2015 Aseptic processing of health care products. Alternative processes for medical devices and combination products
    CORRIGENDUM 1
  • BS EN 13445-1:2014+A1:2014 Unfired pressure vessels. General
    AMENDMENT 1
  • BS EN 13445-3:2014+A1:2015 Unfired pressure vessels. Design
    AMENDMENT 1
  • BS EN 13445-8:2014+A1:2014 Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
    AMENDMENT 1
  • BS EN ISO 14906:2011+A1:2015 Electronic fee collection. Application interface definition for dedicated short-range communication
    AMENDMENT 1
  • BS EN ISO 15118-1:2015 Road vehicles. Vehicle to grid communication interface. General information and use-case definition
    CORRIGENDUM 2
  • BS EN 50134-3:2012 Alarm systems. Social alarm systems. Local unit and controller
    CORRIGENDUM 1
  • BS EN 50561-1:2013 Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurement. Apparatus for in-home use
    CORRIGENDUM 2
  • BS EN 55022:2010 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
    CORRIGENDUM 2
  • BS EN 55032:2012 Electromagnetic compatibility of multimedia equipment. Emission requirements
    CORRIGENDUM 5
  • BS EN 60061-3:1993+A48:2014 Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges
    AMENDMENT 48
  • BS EN 60601-2-37:2008+A1:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
    AMENDMENT 1
  • BS EN 60851-2:2009+A1:2015 Winding wires. Test methods. Determination of dimensions
    AMENDMENT 1
  • BS EN 60974-10:2014+A1:2015 Arc welding equipment. Electromagnetic compatibility (EMC) requirements
    AMENDMENT 1
  • BS ISO 702-1:2009 Machine tools. Connecting dimensions of spindle noses and work holding chucks. Conical connection
    CORRIGENDUM 1
  • BS ISO 3767-2:2008 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for agricultural tractors and machinery
    CORRIGENDUM 1
  • BS ISO 4241:2013 Cinematography. Projection leader (time-based), trailer and cue marks. Specifications
    CORRIGENDUM 1
  • BS ISO 4254-13:2012 Agricultural machinery. Safety. Large rotary mowers
    CORRIGENDUM 1
  • BS ISO 6550-3:2013 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
    CORRIGENDUM 1
  • BS ISO 6550-4:2014 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs
    CORRIGENDUM 1
  • BS ISO 9683-2:2009 Iron ores. Determination of vanadium. Flame atomic absorption spectrometric methods
    CORRIGENDUM 1
  • BS ISO/IEC 9797-2:2011 Information technology. Security techniques. Message Authentication Codes (MACs). Mechanisms using a dedicated hash-function
    CORRIGENDUM 1
  • BS ISO 10285:2007+A1:2012 Rolling bearings. Sleeve type linear ball bearings. Boundary dimensions and tolerances
    CORRIGENDUM 1
  • BS ISO 11228-3:2007 Ergonomics. Manual handling. Handling of low loads at high frequency
    CORRIGENDUM 1
  • BS ISO 12175:1994+A1:2015 Space data and information transfer systems. Standard formatted data units. Structure and construction rules
    AMENDMENT 1
  • BS ISO 13526:2010+A1:2015 Space data and information transfer systems. Tracking data message
    AMENDMENT 1
  • BS ISO/IEC 15693-3:2009+A2:2015 Identification cards. Contactless integrated circuit cards. Vicinity cards. Anticollision and transmission protocol
    AMENDMENT 2
  • BS ISO 16739:2013 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
    CORRIGENDUM 1
  • BS ISO/IEC 19794-9:2011+A2:2015 Information technology. Biometric data interchange formats. Vascular image data
    AMENDMENT 2
  • BS ISO 22645:2005+A1:2015 Space data and information transfer systems. TM (telemetry) space data link protocol
    AMENDMENT 1
  • BS ISO 22646:2005+A1:2015 Space data and information transfer systems. Space packet protocol
    AMENDMENT 1
  • BS ISO 22666:2007+A1:2015 Space data and information transfer systems. AOS (advanced orbiting systems) space data link protocol
    AMENDMENT 1
  • BS ISO/IEC 23002-4:2014+A2:2015 Information technology. MPEG video technologies. Video tool library
    AMENDMENT 2
  • BS ISO/IEC 24769-5:2012 Information technology. Automatic identification and data capture techniques. Real time locating systems (RTLS) device conformance test methods. Test methods for chirp spread spectrum (CSS) at 2,4 GHz air interface
    CORRIGENDUM 1
  • BS OHSAS 18002:2008 Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007
    CORRIGENDUM 1

British standards withdrawn

  • BS 31:1940 Specification. Steel conduit and fittings for electrical wiring
    This standard is withdrawn as it is no longer relevant
  • BS 466:1984 Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use
    This standard is withdrawn as it conflicts with BS EN 15011:2011+A1:2014
  • BS 826:1978 Specification for steel single tier bolted shelving (angle upright type)
    This standard is withdrawn as it is no longer relevant
  • BS 2952:1958 Specification for rubber hose for i.c. engine cooling systems
    This standard is withdrawn as it is no longer relevant
  • BS 4345:1968 Specification for slotted angles
    This standard is withdrawn as it is no longer relevant
  • BS 4521-1.1:1971 Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using bull head rails
    This standard is withdrawn as it is no longer relevant
  • BS 4521-1.2:1971 Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using flat bottom rail
    This standard is withdrawn as it is no longer relevant
  • BS 4521-2:1975 Specification for railway turnouts for private users. Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails
    This standard is withdrawn as it is no longer relevant
  • BS 4521-3.1:1974 Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons. Turnouts using bull head rail
    This standard is withdrawn as it is no longer relevant
  • BS 4521-3.2:1975 Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons. Turnouts using flat bottom rails
    This standard is withdrawn as it is no longer relevant
  • BS 4521-4:1975 Specification for railway turnouts for private users. Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails
    This standard is withdrawn as it is no longer relevant
  • BS 4875-8:1998 Furniture. Strength and stability of furniture. Methods for determination of stability of nondomestic storage furniture
    This standard is withdrawn as it conflicts with BS EN 16121:2013
  • BS 6347-3:1983 (ISO 789-3:1982) Performance assessment of agricultural tractors. Method for determination of turning and clearance diameters
    Superseded by BS ISO 789-3:2015
  • BS 6580:2010 Specification for corrosion inhibiting, engine coolant concentrate (“antifreeze”)
    This standard is withdrawn as it is no longer relevant
  • BS 6811-1.1:1987 Winding wires. Basic dimensions. Specification for diameters of conductors for round winding wires
    This standard is withdrawn as it is no longer relevant
  • BS 7442-4.1:1992 Rubber or plastics covered rollers. Requirements. Specification for apparent hardness
    Superseded by BS ISO 6123-1:2015
  • BS 7647:1993 Specification for radio teleswitches for tariff and load control
    This standard is withdrawn as it is no longer relevant
  • BS 7755-4.2.1:1994 (ISO 11268-1:1993) Soil quality. Biological methods. Effects of pollutants on soil fauna. Determination of acute toxicity to earthworms (Eisenia fetida) using artificial soil substrate
    Superseded by BS EN ISO 11268-1:2015
  • BS 7755-4.2.2:1998 (ISO 11268-2:1998) Soil quality. Biological methods. Effects of pollutants on soil fauna. Determination of effects on reproduction on earthworms (Eisenia fetida)
    Superseded by BS EN ISO 11268-2:2015
  • BS 7825-3.6:1997 Calibration of rubber and plastics test equipment. Calibration schedules. Dimensional properties
    This standard is withdrawn as it is no longer relevant
  • BS 8081:1989 Code of practice for ground anchorages
    Superseded by BS 8081:2015 and BS EN 1997-1:2004+A1:2013
  • BS 8766:2004 Names and identifiers of individuals and groups. Data structure for interoperability. Specification
    This standard is withdrawn as it is no longer relevant
  • BS EN 287-1:2011 Qualification test of welders. Fusion welding. Steels
    Superseded by BS EN ISO 9606-1:2013
  • BS EN 483:1999+A4:2007 Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW
    Superseded by BS EN 15502-2-1:2012 and BS EN 15502-1:2012
  • BS EN 764-3:2002 Pressure equipment. Definition of parties involved
    Superseded by BS EN 764-1:2015
  • BS EN 1218-4:2004+A2:2009 Safety of woodworking machines. Tenoning machines. Edge banding machines fed by chain(s)
    Superseded by BS EN ISO 18217:2015
  • DD CEN/TS 12390-11:2010 Testing hardened concrete. Determination of the chloride resistance of concrete, unidirectional diffusion
    Superseded by BS EN 12390-11:2015
  • BS EN 13829:2001 Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method
    Superseded by BS EN ISO 9972:2015
  • BS EN 15377-1:2008 Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Determination of the design heating and cooling capacity
    Superseded by BS EN ISO 11855-1:2015
  • BS EN 15377-3:2007 Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Optimizing for use of renewable energy sources
    Superseded by BS EN ISO 11855-4:2015
  • BS EN 15420:2010 Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW
    Superseded by BS EN 15502-2-1:2012 and BS EN 15502-1:2012
  • DD CEN/TS 15531-1:2007 Public transport. Service interface for real-time information relating to public transport operations. Context and framework
    Superseded by BS EN 15531-1:2015
  • DD CEN/TS 15531-2:2007 Public transport. Service interface for real-time information relating to public transport operations. Communications infrastructure
    Superseded by BS EN 15531-2:2015
  • DD CEN/TS 15531-3:2007 Public transport. Service interface for real-time information relating to public transport operations. Functional service interfaces
    Superseded by BS EN 15531-3:2015
  • PD CEN/TS 16454:2013 Intelligent transport systems. ESafety. ECall end to end conformance testing
    Superseded by BS EN 16454:2015
  • BS EN 60118-1:1995 Hearing aids. Hearing aids with induction pickup coil input
    Superseded by BS EN 60118-0:2015
  • BS EN 60118-2:1996 Hearing aids. Methods for measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits
    Superseded by BS EN 60118-0:2015
  • BS EN 60118-6:1999 (Edition 2) Hearing aids. Characteristics of electrical input circuits for hearing aids
    Superseded by BS EN 60118-0:2015
  • BS EN 60601-2-44:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
    Superseded by BS EN 60601-2-44:2009+A1:2012
  • BS ISO 7578:2008 Road vehicles. Sheath-type glow-plugs. General requirements and test methods
    Superseded by BS ISO 17447-1:2015, BS ISO 17447-2:2015 and BS ISO 17447-3:2015
  • BS ISO TR 10828:1997 Worm gears. Geometry of worm profiles
    Superseded by PD ISO/TR 10828:2015
  • BS ISO 10838-1:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter less than or equal to 63mm
    Superseded by BS ISO 17885:2015
  • BS ISO 10838-2:2000 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter greater than 63mm
    Superseded by BS ISO 17885:2015
  • BS ISO 10838-3:2001 Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm
    Superseded by BS ISO 17885:2015
  • DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
    Superseded by BS EN ISO 24817:2015
  • DD CLC/TS 50502:2008 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems
    Superseded by BS EN 50502:2015
  • PD ISO/IEC GUIDE 28:2004 Conformity assessment. Guidance on a thirdparty certification system for products
    Superseded by PD ISO/IEC TR 17026:2015
  • PD ISO/IEC GUIDE 53:2005 Conformity assessment. Guidance on the use of an organization’s quality management system in product certification
    Superseded by PD ISO/IEC TR 17026:2015
  • PD 6532-3:2000 Reference materials. Guide to the contents of certificates of reference materials. Guide to the uses of certified reference materials
    Superseded by PD ISO GUIDE 33:2015
  • BS AU 262-1:1995 (ISO 6550-1:1994) Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M14 x 1, 25 glow-plugs
    Superseded by BS ISO 17447-1:2015, BS ISO 17447-2:2015 and BS ISO 17447-3:2015
  • BS AU 262-2:1995 (ISO 6550-2:1994) Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M12 x 1.25 glow-plugs
    Superseded by BS ISO 17447-1:2015, BS ISO 17447-2:2015 and BS ISO 17447-3:2015
  • PAS 223:2011 Prerequisite programmes and design requirements for food safety in the manufacture and provision of food packaging
    Superseded by PD ISO/TS 22002-4:2013
  • CP 2012-1:1974 Code of practice for foundations for machinery. Foundations for reciprocating machines
    This standard is withdrawn as it is no longer relevant

 

Published in international.