British publications

Here are new and revised British standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British standards withdrawn’ section. 

  • BS 8477:2014 Code of practice for customer service
    Supersedes BS 8477:2007
  • BS 8590:2014 Code of practice for the installation of audio visual equipment
    Supersedes PAS 122:2009
  • BS 8599-2:2014 First aid kits. Specification for the contents of motor vehicle first aid kits 

BS EN standards

The following are British standard implementations of the English language versions of European standards (ENs). The date referenced in the identifier is the date of the European standard. 

  • BS EN 197-2:2014 Cement. Conformity evaluation
    Supersedes BS EN 197-2:2000
  • BS EN 415-10:2014 Safety of packaging machines. General requirements
  • BS EN 643:2014 Paper and board. European list of standard grades of paper and board for recycling
    Supersedes BS EN 643:2002
  • BS EN 1097-9:2014 Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear by abrasion from studded tyres. Nordic test
    Supersedes BS EN 1097-9:1998
  • BS EN 1364-3:2014 Fire resistance tests for non-loadbearing elements. Curtain walling. Full configuration (complete assembly)
    Supersedes BS EN 1364-3:2006
  • BS EN 1634-1:2014 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Fire resistance test for door and shutter assemblies and openable windows
    Supersedes BS EN 1634-1:2008
  • BS EN 1751:2014 Ventilation for buildings. Air terminal devices. Aerodynamic testing of damper and valves
    Supersedes BS EN 1751:1999
  • BS EN 2794-001:2014 Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A. Technical specification
    Supersedes BS EN 2794-001:1999
  • BS EN 2794-004:2014 Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A. UNC thread terminals. Product standard
    Supersedes BS EN 2794-004:1999
  • BS EN 10357:2013 Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
    Partially supersedes BS 4825-1:1991+A2:2009
  • BS EN ISO 11960:2014 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
    Supersedes BS EN ISO 11960:2011
  • BS EN ISO 11997-2:2013 Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity/UV light
    Supersedes BS EN ISO 11997-2:2006
  • BS EN 12229:2014 Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces
    Supersedes BS EN 12229:2007
  • BS EN 12464-2:2014 Light and lighting. Lighting of work places. Outdoor work places
    Supersedes BS EN 12464-2:2007
  • BS EN 13279-2:2014 Gypsum binders and gypsum plasters. Test methods
    Supersedes BS EN 13279-2:2004
  • BS EN 13368-1:2014 Fertilizers. Determination of chelating agents in fertilizers by chromatography. Determination of EDTA, HEEDTA and DTPA by ion chromatography
    Supersedes BS EN 13368-1:2001
  • BS EN 13451-10:2014 Swimming pool equipment. Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
    Supersedes BS EN 13451-10:2004
  • BS EN 13451-11:2014 Swimming pool equipment. Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
    Supersedes BS EN 13451-11:2004
  • BS EN 13599:2014 Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
    Supersedes BS EN 13599:2002
  • BS EN 13936:2014 Workplace exposure. Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour. Requirements and test methods
  • BS EN 14043:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods
    Supersedes BS EN 14043:2005+A1:2009
  • BS EN 14044:2014 High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods
    Supersedes BS EN 14044:2005+A1:2009
  • BS EN 14076:2013 Timber stairs. Terminology
    Supersedes BS EN 14076:2004
  • BS EN 14080:2013 Timber structures. Glued laminated timber and glued solid timber. Requirements
    Supersedes BS EN 1194:1999, BS EN 14080:2005, BS EN 385:2001, BS EN 386:2001, BS EN 387:2001, BS EN 390:1995, BS EN 391:2002 and BS EN 392:1995
  • BS EN 15254-6:2014 Extended application of results from fire resistance tests. Non-loadbearing walls. Curtain walling
  • BS EN 15306:2014 Surfaces for outdoor sports areas. Exposure of synthetic turf to simulated wear
    Supersedes BS EN 15306:2007
  • BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance
    Supersedes BS EN ISO 15791-1:2004
  • BS EN 15910:2014 Water quality. Guidance on the estimation of fish abundance with mobile hydroacoustic methods
  • BS EN ISO 16387:2014 Soil quality. Effects of contaminants on Enchytraeidae (Enchytraeus sp.). Determination of effects on reproduction
    Supersedes BS ISO 16387:2004
  • BS EN 16402:2013 Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing
  • BS EN 16407-1:2014 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Tangential radiographic inspection
  • BS EN 16407-2:2014 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays. Double wall radiographic inspection
  • BS EN 16419:2014 Leather. Chamois leather for cleaning purposes. Classification and requirements
  • BS EN 16453:2014 Pulp, paper and paperboard. Determination of phthalates in extracts from paper and paperboard
  • BS EN ISO 16474-1:2013 Paints and varnishes. Methods of exposure to laboratory light sources. General guidance
    Together with BS EN ISO 16474-2:2013 it supersedes BS EN ISO 11341:2004, which is withdrawn.
    Together with BS EN ISO 16474-3:2013 it also supersedes BS EN ISO 11507:2007, which is withdrawn
  • BS EN ISO 16474-2:2013 Paints and varnishes. Methods of exposure to laboratory light sources. Xenon-arc lamps
    Together with BS EN ISO 16474-1:2013, it supersedes BS EN ISO 11341:2004, which is withdrawn
  • BS EN ISO 16474-3:2013 Paints and varnishes. Methods of exposure to laboratory light sources. Fluorescent UV lamps
    Together with BS EN ISO 16474-1:2013 it supersedes BS EN ISO 11507:2007, which is withdrawn
  • BS EN 16483:2014 Leather. Labelling of leather trims in textile products
  • BS EN ISO 16665:2013 Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
    Supersedes BS EN ISO 16665:2005
  • BS EN ISO 16927:2014 Paints and varnishes. Determination of the overcoatability and recoatability of a coating
  • BS EN ISO 25178-605:2014 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (point autofocus probe) instruments
  • BS EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control. Generic specification
    Supersedes BS EN 50288-1:2003
  • BS EN 50288-4-2:2013 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterised up to 600 MHz. Work area and patch cord cables
    Supersedes BS EN 50288-4-2:2003
  • BS EN 50288-5-1:2013 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz. Horizontal and building backbone cables
    Supersedes BS EN 50288-5-1:2003
  • BS EN 50288-5-2:2013 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 250 MHz. Work area and patch cord cables
    Supersedes BS EN 50288-5-2:2003
  • BS EN 50288-6-1:2013 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz. Horizontal and building backbone cables
    Supersedes BS EN 50288-6-1:2003
  • BS EN 50288-6-2:2013 Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for unscreened cables characterised up to 250 MHz. Work area and patch cord cables
    Supersedes BS EN 50288-6-2:2003
  • BS EN 50436-1:2014 Alcohol interlocks. Test methods and performance requirements. Instruments for drink-driving-offender programs
    Supersedes BS EN 50436-1:2005
  • BS EN 50436-2:2014 Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for general preventive use
    Supersedes BS EN 50436-2:2007
  • BS EN 50491-6-1:2014 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). HBES installations. Installation and planning
  • BS EN 60317-0-2:2014 Specifications for particular types of winding wires. General requirements. Enamelled rectangular copper wire
    Supersedes BS EN 60317-0-2:1998
  • BS EN 60358-2:2013 Coupling capacitors and capacitor dividers. AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
    Together with BS EN 60358-1:2012, BS EN 60358-3 and BS EN 60358-4 it supersedes BS 7578:1992 (dual numbered as IEC 60358:1990), which will be withdrawn on publication of all parts of the BS EN 60358 series
  • BS EN 60371-0-1:2014 Specifications for particular types of winding wires. General requirements. Enamelled round copper wire
    Supersedes BS EN 60317-0-1:2008
  • BS EN 61207-7:2013 Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
  • BS EN 61300-3-25:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Concentricity of the non-angled ferrules and non-angled ferrules with fibre installed
    Supersedes BS EN 61300-3-25:1997
  • BS EN 61427-1:2013 Secondary cells and batteries for renewable energy storage. General requirements and methods of test. Photovoltaic off-grid application
    Together with BS EN 61427-2, it supersedes BS EN 61427:2005 which will be withdrawn upon publication of all parts of this series
  • BS EN 61784-5-1:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 1
  • BS EN 61784-5-2:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 2
    Supersedes BS EN 61784-5-2:2012
  • BS EN 61784-5-3:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 3
    Supersedes BS EN 61784-5-3:2012
  • BS EN 61784-5-6:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 6
    Supersedes BS EN 61784-5-6:2012
  • BS EN 61784-5-8:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 8
  • BS EN 61784-5-11:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 11
    Supersedes BS EN 61784-5-11:2012
  • BS EN 61784-5-13:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 13
  • BS EN 61784-5-14:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 14
    Supersedes BS EN 61784-5-14:2012
  • BS EN 61784-5-16:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 16
  • BS EN 61784-5-17:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 17
  • BS EN 61784-5-18:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 18
  • BS EN 61784-5-19:2013 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 19
  • BS EN 61788-18:2013 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • BS EN 61970-452:2013 Energy management system application program interface (EMS-API). CIM Static transmission network model profiles
  • BS EN 62325-351:2013 Framework for energy market communications. CIM European market model exchange profile
  • BS EN 62361-2:2013 Power systems management and associated information exchange. Interoperability in the long term. End to end quality codes for supervisory control and data acquisition (SCADA)
  • BS EN 62394:2014 Service diagnostic interface for consumer electronics products and networks. Implementation for echonet
  • BS EN 62481-2:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines. DLNA media formats 

BS implementations

BS implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard. 

  • BS ISO/IEC 2382-36:2013 Information technology. Vocabulary. Learning, education and training
  • BS ISO 3925:2014 Unsealed radioactive substances. Identification and documentation
  • BS ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). General
    Together with BS ISO 4437-2:2014, BS ISO 4437-3:2014 and BS ISO 4437-5:2014, it supersedes BS ISO 4437:2007, BS ISO 8085-1:2001, BS ISO 8085-2:2001 and BS ISO 8085-3:2001, which are withdrawn
  • BS ISO 4437-2:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes
    Together with BS ISO 4437-1:2014, BS ISO 4437-3:2014 and BS ISO 4437-5:2014, it supersedes BS ISO 4437:2007, BS ISO 8085-1:2001, BS ISO 8085-2:2001 and BS ISO 8085-3:2001, which are withdrawn
  • BS ISO 4437-3:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
    Together with BS ISO 4437-1:2014, BS ISO 4437-2:2014 and BS ISO 4437-5:2014, it supersedes BS ISO 4437:2007, BS ISO 8085-1:2001, BS ISO 8085-2:2001 and BS ISO 8085-3:2001, which are withdrawn
  • BS ISO 4437-5:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fitness for purpose of the system
    Together with BS ISO 4437-1:2014, BS ISO 4437-2:2014 and BS ISO 4437-3:2014, it supersedes BS ISO 4437:2007, BS ISO 8085-1:2001, BS ISO 8085-2:2001, and BS ISO 8085-3:2001 which are withdrawn
  • BS ISO 5718:2013 Harvesting equipment. Blades for agricultural rotary mowers. Requirements
    Supersedes BS ISO 5718:2002
  • BS ISO 7176-25:2013 Wheelchairs. Batteries and chargers for powered wheelchairs
  • BS ISO 7870-5:2014 Control charts. Specialized control charts
  • BS ISO 8791-2:2013 Paper and board. Determination of roughness/smoothness (air leak methods). Bendtsen method
    Supersedes BS 4420:1990
  • BS ISO 8856:2014 Road vehicles. Electrical performance of starter motors. Test methods and general requirements
  • BS ISO 10282:2014 Single-use sterile rubber surgical gloves. Specification
  • BS ISO 11358-3:2013 Plastics. Thermogravimetry (TG) of polymers. Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
  • BS ISO 11359-1:2014 Plastics. Thermomechanical analysis (TMA). General principles
    Supersedes BS ISO 11359-1:1999
  • BS ISO/CIE 11664-6:2014 Colorimetry. CIEDE2000 Colour-difference formula
  • BS ISO 13675:2013 Heating systems in buildings. Method and design for calculation of the system energy performance. Combustion systems (boilers)
  • BS ISO 15686-4:2014 Building Construction. Service Life Planning. Service Life Planning using Building Information Modelling
  • BS ISO 16065-2:2014Pulps. Determination of fibre length by automated optical analysis. Unpolarized light method
    Supersedes BS ISO 16065-2:2007
  • BS ISO 16269-6:2014 Statistical interpretation of data. Determination of statistical tolerance intervals
    Supersedes BS ISO 16269-6:2005
  • BS ISO 17172:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compaction properties of ceramic powders
  • BS ISO 17357-1:2014 Ships and marine technology. Floating pneumatic rubber fenders. High pressure
    Together with BS ISO 17357-2:2014 it supersedes BS ISO 17357:2002, which is withdrawn
  • BS ISO 17357-2:2014 Ships and marine technology. Floating pneumatic rubber fenders. Low pressure
    Together with BS ISO 17357-1:2014 it supersedes BS ISO 17357:2002, which is withdrawn
  • BS ISO 17396:2014 Synchronous belt drives. Metric pitch, trapezoidal profile systems T and AT, belts and pulleys
  • BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
    Supersedes BS ISO 17470:2004
  • BS ISO 18937:2014 Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability
  • BS ISO 19238:2014 Radiological protection. Performance criteria for service laboratories performing biological dosimetry by cytogenetics
    Supersedes BS ISO 19238:2004
  • BS ISO 20301:2014 Health informatics. Health cards. General characteristics
    Supersedes BS ISO 20301:2006
  • BS ISO 21308-5:2014 Road vehicles. Product data exchange between chassis and body work manufacturers (BEP). Coding of loader crane bodywork
  • BS ISO 22400-2:2014 Automation systems and integration. Key performance indicators (KPIs) for manufacturing operations management. Definitions and descriptions
  • BS ISO 22857:2013 Health informatics. Guidelines on data protection to facilitate transborder flows of personal health data
    Supersedes BS ISO 22857:2004
  • BS ISO 23714:2014 Pulps. Determination of water retention value (WRV)
    Supersedes BS ISO 23714:2007
  • BS ISO 24409-2:2014 Ships and marine technology. Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings. Catalogue
  • BS ISO 24409-3:2014 Ships and marine technology. Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings. Code of practice
  • BS ISO/IEC 24759:2014 Information technology. Security techniques. Test requirements for cryptographic modules
    Supersedes BS ISO/IEC 24759:2008
  • BS ISO 25841:2014 Female condoms. Requirements and test methods
  • BS ISO/IEC 27000:2014 Information technology. Security techniques. Information security management systems. Overview and vocabulary
    Supersedes BS ISO/IEC 27000:2012
  • BS ISO 29221:2014 Plastics. Determination of mode I plane-strain crack-arrest toughness
  • BS ISO 55000:2014 Asset management. Overview, principles and terminology
  • BS ISO 55001:2014 Asset management. Management systems. Requirements
  • BS ISO 55002:2014 Asset management. Management systems. Guidelines for the application of ISO 55001
  • BS IEC 61892-6:2013 Mobile and fixed offshore units. Electrical installations. Installation
    Supersedes BS IEC 61892-6:2007 

Published documents 

  • PD CEN/TS 115-4:2014 Safety of escalators and moving walks. Interpretations related to EN 115 family of standards
  • PD CEN/TS 1452-7:2014 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
    Supersedes DD CEN/TS 1456-2:2003 and DD ENV 1452-7:2001
  • PD ISO/TR 4191:2014 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation
  • PD CEN/TS 15968:2010 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LCtandem/MS
  • PD ISO/TR 16115:2013 Gas cylinders. Classification of imperfections arising during the manufacture of seamless steel and aluminium alloy gas cylinders
  • PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
  • PD CEN/TS 16214-2:2014 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Conformity assessment including chain of custody and mass balance
  • PD CEN/TS 16354:2013 Laminate floor coverings. Underlays. Specification, requirements and test methods
  • PD CEN/TR 16626:2014 Vitrified clay pipe systems for drains and sewers. Guidance for voluntary third-party certification procedures
  • PD ISO/TR 16730-3:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a CFD model
  • PD ISO/IEC TR 18268:2013 Identification cards. Contactless integrated circuit cards. Proximity cards. Multiple PICCs in a single PCD field
  • PD ISO/TS 19130-2:2014 Geographic information. Imagery sensor models for geo-positioning. SAR, InSAR, lidar and sonar
  • PD ISO/TS 22002-4:2013 Prerequisite programmes on food safety. Food packaging manufacturing
  • PD ISO/TR 22100-2:2013 Safety of machinery. Relationship with ISO 12100. How ISO 12100 relates to ISO 13849-1
  • PD ISO/IEC TR 38502:2014 Information technology. Governance of IT. Framework and model
  • PD CLC/TS 50591:2013 Specification and verification of energy consumption for railway rolling stock
  • PD IEC/TR 62048:2014 Optical fibres. Reliability. Power law theory
    Supersedes PD IEC/TR 62048:2011
  • PD IEC/TS 62325-503:2014 Framework for energy market communications. Market data exchanges guidelines for the IEC 62325-351 profile
  • PD IEC/TS 62763:2013 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire 

Publicly Available Specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full standard has yet to be published. 

  • PAS 59:2014 Specification for collective fall arrest soft landing systems
    Supersedes PAS 59:2004
  • PAS 2017:2014 Guide for digital infrastructure to enable access to digital content for small-scale commercial enterprises 

Corrigenda to British standards and updated British standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended standards and corrigenda to British standards were made available last month. 

  • BS 2000-112:2005+A1:2014 (IP 112:2011) Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method
    AMENDMENT 1
  • BS 2000-121:2005+A1:2014 (IP 121:2011) Methods of test for petroleum and its products. Determination of oil separation from lubricating grease. Pressure filtration method
    AMENDMENT 1
  • BS 5733:2010+A1:2014 General requirements for electrical accessories. Specification
    AMENDMENT 1
  • BS EN ISO 3807:2013 Gas cylinders. Acetylene cylinders. Basic requirements and type testing
    CORRIGENDUM 1
  • BS EN 3813:2013 Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. De ≤ 50 mm
    CORRIGENDUM 1
  • BS EN ISO 9606-1:2013 Qualification testing of welders. Fusion welding. Steels
    CORRIGENDUM 1
  • BS EN ISO 13274:2013 Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
    CORRIGENDUM 1
  • BS EN 15649-1:2009+A2:2013 Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods
    AMENDMENT 2
  • BS EN 16409:2013 Chemicals used for treatment of water intended for human consumption. Dolomitic lime
    CORRIGENDUM 1
  • BS HD 60269-3:2010+A1:2013 (BS 88-3:2010) Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Examples of standardized systems of fuses A to F
    AMENDMENT 1
  • BS EN 60947-1:2007+A1:2011 Low-voltage switchgear and controlgear. General rules
    CORRIGENDUM 1
  • BS EN 61242:1997+A1:2008 Electrical accessories. Cable reels for household and similar purposes
    CORRIGENDUM 3
  • BS ISO/IEC 15408-1:2009 Information technology. Security techniques. Evaluation criteria for IT security. Introduction and general model
    CORRIGENDUM 1
  • BS ISO/IEC 18013-3:2009+A1:2012 Information technology. Personal identification. ISO-compliant driving licence. Access control, authentication and integrity validation
    CORRIGENDUM 2
  • BS ISO/IEC 19785-4:2010 Information technology. Common Biometric Exchange Formats Framework. Security block format specifications
    CORRIGENDUM 1
  • BS ISO 22915-13:2012 Industrial trucks. Verification of stability. Rough terrain trucks with mast
    CORRIGENDUM 1
  • BS IEC/IEEE 62271-37-082:2012 High-voltage switchgear and controlgear. Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers
    CORRIGENDUM 1
  • BS F 154:2006 Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification
    CORRIGENDUM 1 

British standards withdrawn 

  • BS 4420:1990 (ISO 8791-2:1990) Method for determination of the Bendtsen roughness of paper and board
    Superseded by BS ISO 8791-2:2013
  • BS EN 161:2007 Automatic shut-off valves for gas burners and gas appliances
    Superseded by BS EN 161:2011
  • BS EN 385:2001 Finger jointed structural timber. Performance requirements and minimum production requirements
    Superseded by BS EN 14080:2013
  • BS EN 386:2001 Glued laminated timber. Performance requirements and minimum production requirements
    Superseded by BS EN 14080:2013
  • BS EN 387:2001 Glued laminated timber. Large finger joints. Performance requirements and minimum production requirements
    Superseded by BS EN 14080:2013
  • BS EN 390:1995 Glued laminated timber. Sizes. Permissible deviations
    Superseded by BS EN 14080:2013
  • BS EN 391:2002 Glued laminated timber. Delamination test of glue lines
    Superseded by BS EN 14080:2013
  • BS EN 392:1995 Glued laminated timber. Shear test of glue lines
    Superseded by BS EN 14080:2013
  • BS EN 1041:2008 Information supplied by the manufacturer of medical devices
    Superseded by BS EN 1041:2008+A1:2013
  • BS EN 1194:1999 Timber structures. Glued laminated timber. Strength classes and determination of characteristic values
    Superseded by BS EN 14080:2013
  • DD ENV 1452-7:2001 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
    Superseded by PD CEN/TS 1452-7:2014
  • DD CEN/TS 1456-2:2003 Plastic piping systems for buried and aboveground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
    Superseded by PD CEN/TS 1452-7:2014
  • BS EN 1800:2006 Transportable gas cylinders. Acetylene cylinders. Basic requirements, definitions and type testing
    Superseded by BS EN ISO 3807:2013
  • BS EN ISO 11341:2004 (BS 3900-F14:2004) Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation
    Superseded by BS EN ISO 16474-1:2013 and BS EN ISO 16474-2:2013
  • BS EN ISO 11507:2007 (BS 3900-F16:2007) Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water
    Superseded by BS EN ISO 16474-1:2013 and BS EN ISO 16474-3:2013
  • BS EN 12620:2013 Aggregates for concrete
    This standard is withdrawn as technical changes are required to the document
  • BS EN 13043:2013 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas
    This standard is withdrawn as technical changes are required to the document
  • BS EN 13139:2013 Aggregates for mortar
    This standard is withdrawn as technical changes are required to the document
  • BS EN 13242:2013 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
    This standard is withdrawn as technical changes are required to the document
  • BS EN 13383-1:2013 Armourstone. Specification
    This standard is withdrawn as technical changes are required to the document
  • BS EN 13450:2013 Aggregates for railway ballast
    This standard is withdrawn as technical changes are required to the document
  • BS EN 16236:2013 Evaluation of conformity of aggregates. Initial Type Testing and Factory Production Control
    This standard is withdrawn as technical changes are required to the document
  • BS EN 50363-2-1:2005 Insulating, sheathing and covering materials for low-voltage energy cables. Cross-linked elastomeric sheathing compounds
    Superseded by BS EN 50363-2-1:2005+A1:2011
  • BS EN 60076-2:1997 Power transformers. Temperature rise
    Superseded by BS EN 60076-2:2011
  • BS EN 60086-1:2007 Primary batteries. General
    Superseded by BS EN 60086-1:2011
  • BS EN 60086-2:2007 Primary batteries. Physical and electrical specifications
    Superseded by BS EN 60086-2:2011
  • BS EN 60086-3:2005 Primary batteries. Watch batteries
    Superseded by BS EN 60086-3:2011
  • BS EN 60238:2004+A1:2008 Edison screw lampholders
    Superseded by BS EN 60238:2004+A2:2011
  • BS EN 60335-2-31:2003 Household and similar electrical appliances. Safety. Particular requirements for range hoods
    Superseded by BS EN 60335-2-31:2003+A2:2009
  • BS EN 60335-2-80:2003 Household and similar electrical appliances. Safety. Particular requirements for fans
    Superseded by BS EN 60335-2-80:2003+A2:2009
  • BS EN 60456:2005 Clothes washing machines for household use. Methods for measuring the performance
    Superseded by BS EN 60456:2011
  • BS EN 60704-2-13:2000+A2:2008 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for range hoods
    Superseded by BS EN 60704-2-13:2011
  • BS EN 60749-23:2004 Semiconductor devices. Mechanical and climatic test methods. High temperature operating life
    Superseded by BS EN 60749-23:2004+A1:2011
  • BS EN 61000-4-21:2003 Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
    Superseded by BS EN 61000-4-21:2011
  • BS EN 61558-2-12:2001 Safety of power transformers, power supply units and similar. Particular requirements for constant voltage transformers
    Superseded by BS EN 61558-2-12:2011
  • BS EN 61958:2001 High-voltage prefabricated switchgear and controlgear assemblies. Voltage presence indicating systems
    Superseded by BS EN 62271-206:2011
  • BS EN 62301:2005 Household electrical appliances. Measurement of standby power
    Superseded by BS EN 50564:2011
  • BS ISO 4437:2007 Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications
    Superseded by BS ISO 4437-1:2014, BS ISO 4437-2:2014, BS ISO 4437-3:2014 and BS ISO 4437-5:2014
  • BS ISO 8085-1:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Fittings for socket fusion using heated tools
    Superseded by BS ISO 4437-1:2014, BS ISO 4437-2:2014, BS ISO 4437-3:2014 and BS ISO 4437-5:2014
  • BS ISO 8085-2:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings
    Superseded by BS ISO 4437-1:2014, BS ISO 4437-2:2014, BS ISO 4437-3:2014 and BS ISO 4437-5:2014
  • BS ISO 8085-3:2001 Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Electrofusion fittings
    Superseded by BS ISO 4437-1:2014, BS ISO 4437-2:2014, BS ISO 4437-3:2014 and BS ISO 4437-5:2014
  • PD ISO/TR 14032:2000 Environmental management. Examples of environmental performance evaluation (EPE)
    This standard is withdrawn as it is no longer relevant
  • BS ISO 17357:2002 Ships and marine technology. High-pressure floating pneumatic rubber fenders
    Superseded by BS ISO 17357-1:2014 and BS ISO 17357-2:2014
  • PAS 122:2009 Specification for the installation of audiovisual equipment in classrooms and general publicly accessible areas
    Superseded by BS 8590:2014

 

Published in international.