ISO publications

Here are recent new publications from the International Organization for Standardization (ISO). Hard copy and PDF formats of ISO standards are available for purchase from our website www.standards.co.nz by entering the standard number. 

  • ISO/IEC 1989:2014 (Edition 2) Information technology. Programming languages, their environments and system software interfaces. Programming language COBOL
  • ISO 2936:2014 (Edition 6) Assembly tools for screws and nuts. Hexagon socket screw keys
  • ISO 3008-2:2014 Fire-resistance tests. Lift landing door assemblies
  • ISO 4064-1:2014 (Edition 4) Water meters for cold potable water and hot water. Metrological and technical requirements
  • ISO 4064-2:2014 (Edition 4) Water meters for cold potable water and hot water. Test methods
  • ISO 4064-3:2014 (Edition 4) Water meters for cold potable water and hot water. Test report format
  • ISO 4064-4:2014 Water meters for cold potable water and hot water. Non-metrological requirements not covered in ISO 4064-1
  • ISO 4064-5:2014 Water meters for cold potable water and hot water. Installation requirements
  • ISO 4427-2:2007 Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Pipes
    AMENDMENT 1:April 2014
  • ISO 5149-4:2014 Refrigerating systems and heat pumps. Safety and environmental requirements. Operation, maintenance, repair and recovery
  • ISO 5163:2014 (Edition 4) Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method
  • ISO 5164:2014 (Edition 4) Petroleum products. Determination of knock characteristics of motor fuels. Research method
  • ISO 6182-10:2014 (Edition 2) Fire protection. Automatic sprinkler systems. Requirements and test methods for domestic sprinklers
  • ISO 6509-1:2014 Corrosion of metals and alloys. Determination of dezincification resistance of copper alloys with zinc. Test method
  • ISO 6550-4:2014 (Edition 3) Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs
  • ISO 7001:2007/A1:2013 Graphical symbols. Public information symbols
    CORRIGENDUM 1:April 2014
  • ISO 7076-5:2014 Fire protection. Foam fire extinguishing systems. Fixed compressed air foam equipment
  • ISO 7240-12:2014 (Edition 2) Fire detection and alarm systems. Line type smoke detectors using a transmitted optical beam
  • ISO 7866:2012 Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing
    CORRIGENDUM 1:April 2014
  • ISO 8124-3:2010 Safety of toys. Migration of certain elements
    AMENDMENT 1:May 2014
  • ISO 8513:2014 (Edition 2) Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the apparent initial longitudinal tensile strength
  • ISO 8672:2014 (Edition 2) Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
  • ISO/IEC/IEEE 8802-3:2014 (CD-ROM) (Edition 1) Standard for Ethernet. Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications
  • ISO/IEC/IEEE 8802-11:2012 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Specific requirements. Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
    AMENDMENT 1:March 2014
    AMENDMENT 2:March 2014
    AMENDMENT 3:March 2014
  • ISO 9173-3:2014 Dentistry. Extraction forceps. Design
  • ISO 10079-2:2014 (Edition 3) Medical suction equipment. Manually powered suction equipment
  • ISO 10079-3:2014 (Edition 3) Medical suction equipment. Suction equipment powered from a vacuum or positive pressure gas source
  • ISO 10140-1:2010 Acoustics. Laboratory measurement of sound insulation of building elements. Application rules for specific products
    AMENDMENT 2:June 2014
  • ISO 10140-5: Acoustics. Laboratory measurement of sound insulation of building elements. Requirements for test facilities and equipment
    AMENDMENT 1:May 2014
  • ISO 10306:2014 (Edition 2) Textiles. Cotton fibres. Evaluation of maturity by the air flow method
  • ISO 10327:2014 (Edition 2) Air cargo. Main deck containers. Design and testing
  • ISO 10545-8:2014 (Edition 2) Ceramic tiles. Determination of linear thermal expansion
  • ISO 10605:2008 Road vehicles. Test methods for electrical disturbances from electrostatic discharge
    AMENDMENT 1:April 2014
  • ISO 10983:2014 (Edition 2) Timber. Finger joints. Minimum production requirements and testing methods
  • ISO 11200:2014 (Edition 2) Acoustics. Noise emitted by machinery and equipment. Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
  • ISO/TR 11233:2014 Space systems. Orbit determination and estimation. Process for describing techniques
  • ISO 11270:2014 Intelligent transport systems. Lane keeping assistance systems (LKAS). Performance requirements and test procedures
  • ISO 11499:2014 (Edition 3) Dentistry. Single-use cartridges for local anaesthetics
  • ISO/IEC TS 11581-41:2014 Information technology. User interface icons. Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database
  • ISO 11952:2014 Surface chemical analysis. Scanning probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
  • ISO 12044:2014 (Edition 2) Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
  • ISO 13007-1:2014 (Edition 3) Ceramic tiles. Grouts and adhesives. Terms, definitions and specifications for adhesives
  • ISO 13315-2:2014 Environmental management for concrete and concrete structures. System boundary and inventory data
  • ISO/IEC 13818-1:2013 Information technology. Generic coding of moving pictures and associated audio information. Systems
    AMENDMENT 1:May 2014
    AMENDMENT 2:April 2014
    AMENDMENT 3:April 201
    AMENDMENT 4:April 2014
  • ISO 13910:2014 (Edition 2) Timber structures. Strength graded timber. Test methods for structural properties
  • ISO 14114:2014 (Edition 2) Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements
  • ISO 14389:2014 Textiles. Determination of the phthalate content. Tetrahydrofuran method
  • ISO/IEC 14443-3:2011 Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision
    AMENDMENT 3:April 2014
    AMENDMENT 6:June 2014
  • ISO 14555:2014 (Edition 3) Welding. Arc stud welding of metallic materials
  • ISO/IEC 14763-3:2014 (Edition 2) Information technology. Implementation and operation of customer premises cabling. Testing of optical fibre cabling
  • ISO/IEC 14776-251:2014 Information technology. Small computer system interface (SCSI). USB Attached SCSI (UAS)
  • ISO 15000-5:2014 Electronic Business Extensible Markup Language (ebXML). Core Components Specification (CCS)
  • ISO 15625:2014 Silk. Electronic test method for defects and evenness of raw silk
  • ISO 16000-27:2014 Indoor air. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
  • ISO 16145-5:2014 Ships and marine technology. Protective coatings and inspection method. Assessment method for coating damages
  • ISO 16311-1:2014 Maintenance and repair of concrete structures. General principles
  • ISO 16311-2:2014 Maintenance and repair of concrete structures. Assessment of existing concrete structures
  • ISO 16311-3:2014 Maintenance and repair of concrete structures. Design of repairs and prevention
  • ISO 16311-4:2014 Maintenance and repair of concrete structures. Execution of repairs and prevention
  • ISO 16365-1:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Designation system and basis for specifications
  • ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Preparation of test specimens and determination of properties
  • ISO 16365-3:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Distinction between ether and ester polyurethanes by determination of the ester group content
  • ISO 16399:2014 Meters for irrigation water
  • ISO 16439:2014 Information and documentation. Methods and procedures for assessing the impact of libraries
  • ISO 16484-6:2014 (Edition 3) Building automation and control systems (BACS). Data communication conformance testing
  • ISO/TS 16550:2014 Nanotechnologies. Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
  • ISO/TS 16976-6:2014 Respiratory protective devices. Human factors. Psycho-physiological effects
  • ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants
  • ISO 17215-2:2014 Road vehicles. Video communication interface for cameras (VCIC). Service discovery and control
  • ISO 17215-3:2014 Road vehicles. Video communication interface for cameras (VCIC). Camera message dictionary
  • ISO 17215-4:2014 Road vehicles. Video communication interface for cameras (VCIC). Implementation of communication requirements
  • ISO 17217-1:2014 Traditional Chinese medicine. Ginseng seeds and seedlings. Panax ginseng C.A. Meyer
  • ISO 17221:2014 Plastics. Determination of image clarity (degree of sharpness of reflected or transmitted image)
  • ISO 17223:2014 Plastics. Determination of yellowness index and change in yellowness index
  • ISO 17225-1:2014 Solid biofuels. Fuel specifications and classes. General requirements
  • ISO 17225-2:2014 Solid biofuels. Fuel specifications and classes. Graded wood pellets
  • ISO 17225-3:2014 Solid biofuels. Fuel specifications and classes. Graded wood briquettes
  • ISO 17225-4:2014 Solid biofuels. Fuel specifications and classes. Graded wood chips
  • ISO 17225-5:2014 Solid biofuels. Fuel specifications and classes. Graded firewood
  • ISO 17225-6:2014 Solid biofuels. Fuel specifications and classes. Graded non-woody pellets
  • ISO 17225-7:2014 Solid biofuels. Fuel specifications and classes. Graded non-woody briquettes
  • ISO/TS 17242:2014 Quasi-static calibration procedure for belt force transducers
  • ISO 17255:2014 Space systems. Programme management. Statement of work
  • ISO/TR 17276:2014 Cosmetics. Analytical approach for screening and quantification methods for heavy metals in cosmetics
  • ISO 17299-5:2014 Textiles. Determination of deodorant property. Metal-oxide semiconductor sensor method
  • ISO 17602:2014 Ships and marine technology. Metal valves for use in flanged pipe. Face-to-face and centre-to-face dimensions
  • ISO 17754:2014 Timber structures. Test methods. Torsional resistance of driving in screws
  • ISO 17755:2014 Fire safety. Overview of national fire statistics practices
  • ISO 17860:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of drying loss of ceramic granules
  • ISO/TR 18105:2014 Soil quality. Detection of water soluble chromium(VI) using a ready-to-use test-kit method
  • ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination
  • ISO 18436-2:2014 (Edition 2) Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Vibration condition monitoring and diagnostics
  • ISO 18542-2:2014 Road vehicles. Standardized repair and maintenance information (RMI) terminology. Standardized process implementation requirements, Registration Authority
  • ISO 18893:2014 (Edition 2) Mobile elevating work platforms. Safety principles, inspection, maintenance and operation
  • ISO/IEC 19464:2014 Information technology. Advanced Message Queuing Protocol (AMQP) v1.0 specification
  • ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
  • ISO/IEC 19508:2014 Information technology. Object Management Group Meta Object Facility (MOF) Core
  • ISO/IEC 19509:2014 Information technology. Object Management Group XML Metadata Interchange (XMI)
  • ISO/IEC TR 20007:2014 Information technology. Cultural and linguistic interoperability. Definitions and relationship between symbols, icons, animated icons, pictograms, characters and glyphs
  • ISO 20346:2014 (Edition 2) Personal protective equipment. Protective footwear
  • ISO 21101:2014 Adventure tourism. Safety management systems. Requirements
  • ISO/TS 21609:2014 (Edition 2) Road vehicles. (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
  • ISO/IEC 23000-10:2012 Information technology. Multimedia application format (MPEG-A). Surveillance application format
    CORRIGENDUM 2:March 2014
  • ISO/IEC 23000-13:2014 Information technology. Multimedia application format (MPEG-A). Augmented reality application format
  • ISO/IEC 23001-9:2014 Information technology. MPEG systems technologies. Common encryption of MPEG-2 transport streams
  • ISO/IEC 23002-4:2014 (Edition 2) Information technology. MPEG video technologies. Video tool library
  • ISO/IEC 23007-1:2010/A1:2012 Information technology. Rich media user interfaces. Widgets
    CORRIGENDUM 2:May 2014
  • ISO/IEC 23008-1:2014 Information technology. High efficiency coding and media delivery in heterogeneous environments. MPEG media transport (MMT)
  • ISO/IEC 23009-2:2014 (CD-ROM) (Edition 1) Information technology. Dynamic adaptive streaming over HTTP (DASH). Conformance and reference software
  • ISO 24035:2014 Belt drives. V-belts and the corresponding pulleys for agricultural machineries. Dimensions
  • ISO/IEC 24764:2010 Information technology. Generic cabling systems for data centres
    AMENDMENT 1:April 2014
  • ISO 80601-2-67:2014 Medical electrical equipment. Particular requirements for basic safety and essential performance of oxygen conserving equipment

Published in international.