British publications

Here are recent publications from the British Standards Institution (BSI), together with announcements of supersession and withdrawal. Hard copy and PDF formats of BSI standards are available for purchase from our website www.standards.co.nz by entering the standard number.

British standards

The publications listed below are new and revised British standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British standards withdrawn’ section.

  • BS 6798:2014 Specification for selection, installation, inspection, commissioning, servicing and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
    Supersedes BS 6798:2009
  • BS 8591:2014 Remote centres receiving signals from alarm systems. Code of practice
    Supersedes BS 5979:2007
  • BS 8607:2014 Mechanically operated push-button locksets. Requirements and test methods
  • BS 11200:2014 Crisis management. Guidance and good practice

BS EN standards

The following are British standard implementations of the English language versions of European standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN 35:2014 Pedestal and wall-hung bidets with over-rim supply. Connecting dimensions
    Supersedes BS EN 35:2000 and BS EN 36:1999
  • BS EN 71-7:2014 Safety of toys. Finger paints. Requirements and test methods
    Supersedes BS EN 71-7:2002
  • BS EN 81-22:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Electric lifts with inclined path
  • BS EN 250:2014 Respiratory equipment. Open-circuit selfcontained compressed air diving apparatus. Requirements, testing and marking
    Supersedes BS EN 250:2000
  • BS EN 690:2013 Agricultural machinery. Manure spreaders. Safety
    Supersedes BS EN 690:1994+A1:2009
  • BS EN 851:2014 Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications
    Supersedes BS EN 851:1996
  • BS EN 933-6:2014 Tests for geometrical properties of aggregates. Assessment of surface characteristics. Flow coefficient of aggregates
    Supersedes BS EN 933-6:2001
  • BS EN 941:2014 Aluminium and aluminium alloys. Circle and circle stock for the production of general applications. Specifications
    Supersedes BS EN 941:1996
  • BS EN 1097-10:2014 Tests for mechanical and physical properties of aggregates. Determination of water suction height
    Supersedes BS EN 1097-10:2002
  • BS EN 1143-2:2014 Secure storage units. Requirements, classification and methods of tests for resistance to burglary. Deposit systems
    Supersedes BS EN 1143-2:2001
  • BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing of Lightweight aggregates
  • BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to disintegration of Lightweight Aggregates
  • BS EN 1422:2014 Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods
    Supersedes BS EN 1422:1997+A1:2009
  • BS EN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing. Barbecues burning solid fuels. Requirements and test methods
  • BS EN 1866-2:2014 Mobile fire extinguishers. Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
    Supersedes BS EN 1866:2005
  • BS EN 1873:2014 Prefabricated accessories for roofing. Individual rooflights of plastics. Product specification and test methods
    Supersedes BS EN 1873:2005
  • BS EN 2402:2014 Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3. Annealed. Wire. D ≤ 10 mm
  • BS EN 3475-514:2014 Aerospace series. Cables, electrical, aircraft use. Test methods. Porosity of copper cladding on aluminium strands
    Supersedes BS EN 3475-514:2007
  • BS EN 4057-402:2014 Aerospace series. Cable ties for harnesses. Test methods. Life cycle
    Supersedes BS EN 4057-402:2006
  • BS EN 4199-003:2014 Aerospace series. Bonding straps for aircraft. Bonding strap assemblies with flat braided conductor copper, tin plated -65ºC up to 150ºC and copper, nickel plated -65ºC up to 260ºC. Product standard
    Supersedes BS EN 4199-003:2009
  • BS EN 4293:2014 Aerospace series. Aluminium alloy AL-P7175. T73511. Extruded bar and section. a or D ≤ 150 mm
  • BS EN 4549:2014 Aerospace series. Pipe coupling, in heat resisting steel or in heat resisting nickel alloy. Coupling end, welded. Design configuration. Inch series
    Supersedes BS EN 4549:2003
  • BS EN 4627:2014 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa
    Supersedes BS EN 4627:2007
  • BS EN 4651:2014 Aerospace series. Copper-clad aluminium alloy conductors for electrical cables. Product standard
  • BS EN 4707:2014 Aerospace series. Acid pickling of aluminium and aluminum alloy without hexavalent chromium
  • BS EN 4708-001:2014 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Technical specification
  • BS EN 6059-406:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Vibration
  • BS EN 6059-601:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Open and close
  • BS EN ISO 8331:2014 Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
    Supersedes BS EN ISO 8331:2011
  • BS EN ISO 9173-3:2014 Dentistry. Extraction forceps. Design
  • BS EN ISO 10079-2:2014 Medical suction equipment. Manually powered suction equipment
    Supersedes BS EN ISO 10079-2:2009
  • BS EN ISO 10079-3:2014 Medical suction equipment. Suction equipment powered from a vacuum or positive pressure gas source
    Supersedes BS EN ISO 10079-3:2009
  • BS EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation. Gas-phase air cleaning media
  • BS EN ISO 11133:2014 Microbiology of food, animal feed and water. Preparation, production, storage and performance testing of culture media
    Supersedes DD CEN ISO/TS 11133-1:2009 and DD CEN ISO/TS 11133-2:2003+A1:2011
  • BS EN 12042:2014 Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
    Supersedes BS EN 12042:2005+A1:2010
  • BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
    Supersedes BS EN 12110:2002+A1:2008
  • BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
    Supersedes BS EN 12111:2002+A1:2009
  • BS EN 12183:2014 Manual wheelchairs. Requirements and test methods
    Supersedes BS EN 12183:2009
  • BS EN 12184:2014 Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
    Supersedes BS EN 12184:2009
  • BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
    Supersedes BS EN 12252:2012
  • BS EN 12312-2:2014 Aircraft ground support equipment. Specific requirements. Catering vehicles
    Supersedes BS EN 12312-2:2002+A1:2009
  • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
    Supersedes BS EN 12341:1999 and BS EN 14907:2005
  • BS EN 12597:2014 Bitumen and bituminous binders. Terminology
    Supersedes BS EN 12597:2000
  • BS EN ISO 12625-3:2014 Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density and bulk
    Supersedes BS EN ISO 12625-3:2005
  • BS EN ISO 12625-7:2014 Tissue paper and tissue products. Determination of optical properties. Measurement of brightness and colour with D65/10º (outdoor daylight)
    Supersedes BS EN ISO 12625-7:2007
  • BS EN 12697-7:2014 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
    Supersedes BS EN 12697-7:2002
  • BS EN 12823-1:2014 Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-E-retinol and 13-Z-retinol
    Supersedes BS EN 12823-1:2000
  • BS EN 12878:2014 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
    Supersedes BS EN 12878:2005
  • BS EN 12881-1:2014 Conveyor belts. Fire simulation flammability testing. Propane burner tests
    Supersedes BS EN 12881-1:2005+A1:2008
  • BS EN 12945:2014 Liming materials. Determination of neutralizing value. Titrimetric methods
    Supersedes BS EN 12945:2008
  • BS EN ISO 12999-1:2014 Acoustics. Determination and application of measurement uncertainties in building acoustics. Sound insulation
    Supersedes BS EN 20140-2:1993
  • BS EN ISO 13354:2014 Petroleum and natural gas industries. Drilling and production equipment. Shallow gas diverter equipment
  • BS EN 13555:2014 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    Supersedes BS EN 13555:2004
  • BS EN 13859-1:2014 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing
    Supersedes BS EN 13859-1:2010
  • BS EN 13859-2:2014 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls
    Supersedes BS EN 13859-2:2010
  • BS EN 13924-2:2014 Bitumen and bituminous binders. Specification framework for special paving grade bitumen. Multigrade paving grade bitumens
  • BS EN ISO 13935-1:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the strip method
    Supersedes BS EN ISO 13935-1:1999
  • BS EN ISO 13935-2:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the grab method
    Supersedes BS EN ISO 13935-2:1999
  • BS EN ISO 14114:2014 Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements
    Supersedes BS EN ISO 14114:1999
  • BS EN 14180:2014 Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
    Supersedes BS EN 14180:2003+A2:2009
  • BS EN ISO 14453:2014 Pulps. Determination of acetone-soluble matter
    Supersedes BS EN ISO 14453:2000
  • BS EN ISO 14555:2014 Welding. Arc stud welding of metallic materials
    Supersedes BS EN ISO 14555:2006
  • BS EN 14570:2014 LPG equipment and accessories. Equipping of overground and underground LPG vessels
    Supersedes BS EN 14570:2005
  • BS EN 14700:2014 Welding consumables. Welding consumables for hard-facing
    Supersedes BS EN 14700:2005
  • BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
    Supersedes BS EN 14893:2006
  • BS EN 14908-1:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Protocol Stack
    Supersedes BS EN 14908-1:2005
  • BS EN 14908-2:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Twisted Pair Communication
    Supersedes BS EN 14908-2:2005
  • BS EN 14908-3:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Power Line Channel Specification
    Supersedes BS EN 14908-3:2006
  • BS EN 14908-4:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. IP Communication
    Supersedes BS EN 14908-4:2006
  • BS EN 15208:2014 Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications
    Supersedes BS EN 15208:2007
  • BS EN 15362:2014 Chemicals used for treatment of swimming pool water. Sodium carbonate
    Supersedes BS EN 15362:2007
  • BS EN 15363:2014 Chemicals used for treatment of swimming pool water. Chlorine
    Supersedes BS EN 15363:2007
  • BS EN 15497:2014 Structural finger jointed solid timber. Performance requirements and minimum production requirements
    Supersedes BS EN 385:2001
  • BS EN 15514:2014 Chemicals used for treatment of swimming pool water. Hydrochloric acid
    Supersedes BS EN 15514:2007
  • BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
    Together with BS EN 15534-5:2014 it supersedes DD CEN/TS 15534-3:2007, which is withdrawn
  • BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
    Together with BS EN 15534-4:2014 it supersedes DD CEN/TS 15534-3:2007, which is withdrawn
  • BS EN ISO 15758:2014 Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
    Supersedes BS EN 14114:2002
  • BS EN 15888:2014 Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing
  • BS EN 16070:2014 Products used for treatment of water intended for human consumption. Natural zeolite
  • BS EN 16191:2014 Tunnelling machinery. Safety requirements
    Supersedes BS EN 12336:2005+A1:2008 and BS EN 815:1996+A2:2008
  • BS EN 16203:2014 Safety of Industrial Trucks. Dynamic tests for verification of lateral stability. Counterbalanced Trucks
  • BS EN 16287-1:2014 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 1 finish
  • BS EN 16287-2:2014 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 1 finish
  • BS EN 16288-1:2014 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 3 finish
  • BS EN 16288-2:2014 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 3 finish
  • BS EN 16290-1:2014 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 7,5 R finish
  • BS EN 16290-2:2014 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 7,5 R finish
  • BS EN 16307-6:2014 Industrial trucks. Safety requirements and verification. Supplementary requirements for burden and personnel carriers
  • BS EN 16323:2014 Glossary of wastewater engineering terms
    Partially supersedes BS EN 1085:2007
  • BS EN 16350:2014 Protective gloves. Electrostatic properties
  • BS EN 16392-2:2014 Non-destructive testing. Characterisation and verification of ultrasonic phased array equipment. Probes
  • BS EN 16418:2014 Paper and board. Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2)
  • BS EN 16436-1:2014 Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase. Hoses and tubings
  • BS EN 16437:2014 Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action. Test method and requirements (phase 2, step 2)
  • BS EN 16472:2014 Plastics. Method for artificial accelerated photo-ageing using medium pressure mercury vapour lamps
  • BS EN ISO 16484-5:2014 Building automation and control systems (BACS). Data communication protocol
    Supersedes BS EN ISO 16484-5:2012
  • BS EN 16485:2014 Round and sawn timber. Environmental Product Declarations. Product category rules for wood and wood-based products for use in construction
  • BS EN 16489-1:2014 Professional indoor UV exposure services. Requirements for the provision of training
  • BS EN 16521:2014 Cosmetics. Analytical methods. GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection
  • BS EN 16522:2014 Tanks for transport of dangerous goods. Service equipment for tanks. Flame arresters for breather devices
  • BS EN 16566:2014 Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards
  • BS EN 16590-1:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. General principles for design and development
    Supersedes BS ISO 25119-1:2010
  • BS EN 16590-2:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Concept phase
    Supersedes BS ISO 25119-2:2010
  • BS EN 16590-3:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Series development, hardware and software
    Supersedes BS ISO 25119-3:2010
  • BS EN 16590-4:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Production, operation, modification and supporting processes
    Supersedes BS ISO 25119-4:2010
  • BS EN 16701:2014 Energetic materials for defence. Safety, vulnerability. Friability
  • BS EN ISO 17184:2014 Soil quality. Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
  • BS EN ISO 18542-2:2014 Road vehicles. Standardized repair and maintenance information (RMI) terminology. Standardized process implementation requirements, Registration Authority
  • BS EN ISO 19115-1:2014 Geographic information. Metadata. Fundamentals
    Supersedes BS EN ISO 19115:2005
  • BS EN ISO 19117:2014 Geographic information. Portrayal
    Supersedes BS EN ISO 19117:2006
  • BS EN ISO 21670:2014 Fasteners. Hexagon weld nuts with flange
  • BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements. Automatic and semi-automatic valves
    Supersedes BS EN ISO 23553-1:2009
  • BS EN ISO 24801-1:2014 Recreational diving services. Requirements for the training of recreational scuba divers. Level 1. Supervised diver
    Supersedes BS EN 14153-1:2003
  • BS EN ISO 24801-2:2014 Recreational diving services. Requirements for the training of recreational scuba divers. Level 2. Autonomous diver
    Supersedes BS EN 14153-2:2003
  • BS EN ISO 24801-3:2014 Recreational diving services. Requirements for the training of recreational scuba divers. Level 3. Dive leader
    Supersedes BS EN 14153-3:2003
  • BS EN ISO 24802-1:2014 Recreational diving services. Requirements for the training of scuba instructors. Level 1
    Supersedes BS EN 14413-1:2004
  • BS EN ISO 24802-2:2014 Recreational diving services. Requirements for the training of scuba instructors. Level 2
    Supersedes BS EN 14413-2:2004
  • BS EN ISO 27627:2014 Petroleum and natural gas industries. Aluminium alloy drill pipe thread connection gauging
  • BS EN 28510-1:2014 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 90º peel
    Supersedes BS EN 28510-1:1993
  • BS EN 50125-1:2014 Railway applications. Environmental conditions for equipment. Rolling stock and on-board equipment
    Supersedes BS EN 50125-1:1999
  • BS EN 50153:2014 Railway applications. Rolling stock. Protective provisions relating to electrical hazards
    Supersedes BS EN 50153:2002
  • BS EN 50173-6:2013 Information technology. Generic cabling systems. Distributed building services
  • BS EN 50289-3-8:2013 Communication cables. Specifications for test methods. Mechanical test methods. Abrasion resistance of cable sheath markings
    Supersedes BS EN 50289-3-8:2001
  • BS EN 50343:2014 Railway applications. Rolling stock. Rules for installation of cabling
    Supersedes BS EN 50343:2003
  • BS EN 50407-3:2014 Multi-pair cables used in high bit rate digital access telecommunications networks. Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
  • BS EN 50585:2014 Communications protocol to transport satellite delivered signals over IP networks
  • BS EN 50599:2014 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
  • BS EN 50600-2-1:2014 Information technology. Data centre facilities and infrastructures. Building construction
  • BS EN 50600-2-2:2014 Information technology. Data centre facilities and infrastructures. Power distribution
  • BS EN 60255-27:2014 Measuring relays and protection equipment. Product safety requirements
    Supersedes BS EN 60255-27:2005
  • BS EN 60317-52:2014 Specifications for particular types of winding wires. Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
    Supersedes BS EN 60317-52:1999
  • BS EN 60335-2-27:2013 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
    Supersedes BS EN 60335-2-27:2010 which remains current
  • BS EN 60358-3:2014 Coupling capacitors and capacitor dividers. AC or DC coupling capacitors for harmonic-filters applications
    Supersedes BS 7578:1992 which remains current
  • BS EN 60695-1-40:2014 Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids
  • BS EN 60695-9-2:2014 Fire hazard testing. Surface spread of flame. Summary and relevance of test methods
    Supersedes DD IEC/TS 60695-9-2:2005
  • BS EN 60721-2-9:2014 Classification of environmental conditions. Environmental conditions appearing in nature. Measured shock and vibration data. Storage, transportation and in-use
  • BS EN 60754-1:2014 Test on gases evolved during combustion of materials from cables. Determination of the halogen acid gas content
    Supersedes BS EN 50267-1:1999, BS EN 50267-2-1:1999, BS EN 50267-2-2:1999 and BS EN 50267-2-3:1999 which remain current
  • BS EN 60754-2:2014 Test on gases evolved during combustion of materials from cables. Determination of acidity (by pH measurement) and conductivity
    Supersedes BS EN 50267-1:1999, BS EN 50267-2-1:1999, BS EN 50267-2-2:1999 and BS EN 50267-2-3:1999 which remain current
  • BS EN 60793-1-51:2014 Optical fibres. Measurement methods and test procedures. Dry heat (steady state) tests
    Supersedes BS EN 60793-1-51:2002
  • BS EN 60793-1-52:2014 Optical fibres. Measurement methods and test procedures. Change of temperature tests
    Supersedes BS EN 60793-1-52:2002
  • BS EN 60793-1-53:2014 Optical fibres. Measurement methods and test procedures. Water immersion tests
    Supersedes BS EN 60793-1-53:2002
  • BS EN 60794-1-20:2014 Optical fibre cables. Generic specification. Basic optical cable test procedures. General and definitions
    Supersedes BS EN 60794-1-2:2003 which remains current
  • BS EN 60794-2-20:2014 Optical fibre cables. Indoor cables. Family specification for multi-fibre optical cables
    Supersedes BS EN 60794-2-20:2010
  • BS EN 60794-5-10:2014 Optical fibre cables. Family specification. Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
  • BS EN 60794-5-20:2014 Optical fibre cables. Family specification. Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
  • BS EN 60819-3-4:2014 Non-cellulosic papers for electrical purposes. Specifications for individual materials. Aramid fibre paper containing not more than 50 % of mica particles
    Supersedes BS EN 60819-3-4:2002 which remains current
  • BS EN 60974-3:2014 Arc welding equipment. Arc striking and stabilizing devices
    Supersedes BS EN 60974-3:2007
  • BS EN 61300-2-42:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Static side load for strain relief
    Supersedes BS EN 61300-2-42:2005
  • BS EN 61300-3-52:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibres
  • BS EN 61375-3-4:2014 Electronic railway equipment. Train communication network (TCN). Ethernet Consist Network (ECN)
  • BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d c. Equipment for testing, measuring or monitoring of protective measures. Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
  • BS EN 61587-5:2014 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Seismic tests for chassis, subracks and plug-in units
  • BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments
  • BS EN 61858-1:2014 Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Wire-wound winding EIS
    Supersedes BS EN 61858:2008
  • BS EN 61968-9:2014 Application integration at electric utilities. System interfaces for distribution management. Interfaces for meter reading and control
    Supersedes BS EN 61968-9:2009
  • BS EN 62065:2014 Maritime navigation and radiocommunication equipment and systems. Track control systems. Operational and performance requirements, methods of testing and required test results
    Supersedes BS EN 62065:2002 which remains current
  • BS EN 62074-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic WDM devices. Generic specification
    Supersedes BS EN 62074-1:2009
  • BS EN 62321-2:2014 Determination of certain substances in electrotechnical products. Disassembly, disjointment and mechanical sample preparation
    Supersedes BS EN 62321:2009 which remains current
  • BS EN 62321-3-1:2014 Determination of certain substances in electrotechnical products. Screening. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
    Supersedes BS EN 62321:2009 which remains current
  • BS EN 62321-3-2:2014 Determination of certain substances in electrotechnical products. Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography
    Supersedes BS EN 62321:2009 which remains current
  • BS EN 62321-4:2014 Determination of certain substances in electrotechnical products. Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICPOES and ICP-MS
    Supersedes BS EN 62321:2009 which remains current
  • BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICPOES and ICP-MS
    Supersedes BS EN 62321:2009 which remains current
  • BS EN 62379-5-2:2014 Common control interface for networked digital audio and video products. Transmission over networks. Signalling (TA4)
  • BS EN 62388:2013 Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results
    Supersedes BS EN 62388:2008 which remains current
  • BS EN 62448:2014 Multimedia systems and equipment. Multimedia e-publishing and e-books. Generic format for e-publishing
    Supersedes BS EN 62448:2009
  • BS EN 62481-1:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines. Architecture and protocols
  • BS EN 62481-5:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines. DLNA Device Profile guidelines
  • BS EN 62555:2014 Ultrasonics. Power measurement. High intensity therapeutic ultrasound (HITU) transducers and systems
  • BS EN 62608-1:2014 Multimedia home network configuration. Basic Reference model. System model
  • BS EN 62676-1-1:2014 Video surveillance systems for use in security applications. System requirements. General
  • BS EN 62676-1-2:2014 Video surveillance systems for use in security applications. System requirements. Performance requirements for video transmission
  • BS EN 62676-2-1:2014 Video surveillance systems for use in security applications. Video transmission protocols. General requirements
  • BS EN 62676-2-2:2014 Video surveillance systems for use in security applications. Video transmission protocols. IP interoperability implementation based on HTTP and REST services
  • BS EN 62676-2-3:2014 Video surveillance systems for use in security applications. Video transmission protocols. IP interoperability implementation based on Web services
  • BS EN 62680-4:2014 Universal serial bus interfaces for data and power. Universal Serial Bus Cables and Connectors Class Document, Revision 2.0
  • BS EN 62770:2014 Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment

 BS ENs implemented by amendment

  • BS EN ISO 6883:2014 Animal and vegetable fats and oils.Determination of conventional mass per volume (litre weight in air)
    Implementation of European Standard EN ISO 6883 by amendment to BS ISO 6883:2007
  • BS EN ISO 8407:2014 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
    Implementation of European Standard EN ISO 8407 by amendment to BS ISO 8407:2009
  • BS EN ISO 8586:2014 Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
    Implementation of European Standard EN ISO 8586 by amendment to BS ISO 8586:2012
  • BS EN ISO 11272:2014 Soil quality. Determination of dry bulk density
    Implementation of European Standard EN ISO 11272 by amendment to BS 7755-5.6:1999
  • BS EN ISO 11274:2014 Soil quality. Determination of the water retention characteristic. Laboratory methods
    Implementation of European Standard EN ISO 11274 by amendment to BS ISO 11274:1998
  • BS EN ISO 11275:2014 Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind’s evaporation method
    Implementation of European Standard EN ISO 11275 by amendment to BS ISO 11275:2004
  • BS EN ISO 11276:2014 Soil quality. Determination of pore water pressure. Tensiometer method
    Implementation of European Standard EN ISO 11276 by amendment to BS 7755-5.1:1996
  • BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
    Implementation of European Standard EN ISO 11357-2 by amendment to BS ISO 11357-2:2013
  • BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
    Implementation of European Standard EN ISO 11357-5 by amendment to BS ISO 11357-5:2013
  • BS EN ISO 12671:2014 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
    Implementation of European Standard EN ISO 12671 by amendment to BS ISO 12671:2012
  • BS EN ISO 12872:2014 Olive oils and olive-pomace oils. Determination of the 2-glyceryl monopalmitate content
    Implementation of European Standard EN ISO 12872 by amendment to BS ISO 12872:2010
  • BS EN ISO 12873:2014 Olive oils and olive-pomace oils. Determination of wax content by capillary gas chromatography
    Implementation of European Standard EN ISO 12873 by amendment to BS ISO 12873:2010
  • BS EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems. Offshore pipelines
    Implementation of European Standard EN ISO 15589-2 by amendment to BS ISO 15589-2:2012
  • BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
    Implementation of European Standard EN ISO 15970 by amendment to BS ISO 15970:2008
  • BS EN ISO 15971:2014 Natural gas. Measurement of properties. Calorific value and Wobbe index
    Implementation of European Standard EN ISO 15971 by amendment to BS ISO 15971:2008
  • BS EN ISO 16635-1:2014 Dentistry. Dental rubber dam technique. Hole punch
    Implementation of European Standard EN ISO 16635-1 by amendment to BS ISO 16635-1:2013
  • BS EN ISO 18772:2014 Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
    Implementation of European Standard EN ISO 18772 by amendment to BS ISO 18772:2008
  • BS EN ISO 19125-1:2006 Geographic information. Simple feature access. Common architecture
    Implementation of European Standard EN ISO 19125-1 by amendment to BS ISO 19125-1:2004
  • BS EN ISO 20753:2014 Plastics. Test specimens
    Implementation of European Standard EN ISO 20753 by amendment to BS ISO 20753:2008
  • BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
    Implementation of European Standard EN ISO 22068 by amendment to BS ISO 22068:2012
  • BS EN ISO 29822:2014 Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols
    Implementation of European Standard EN ISO 29822 by amendment to BS ISO 29822:2009
  • BS EN ISO 29841:2014 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a’ (pheophytins a, a’ and pyropheophytins)
    Implementation of European Standard EN ISO 28941 by amendment to BS ISO 29841:2009

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard. 

  • BS ISO 230-2:2014 Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled axes
    Supersedes BS ISO 230-2:2006
  • BS ISO 500-1:2014 Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4. General specifications, safety requirements, dimensions for master shield and clearance zone
    Supersedes BS ISO 500-1:2004
  • BS ISO 500-3:2014 Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4. Main PTO dimensions and spline dimensions, location of PTO
    Supersedes BS ISO 500-3:2004
  • BS ISO 817:2014 Refrigerants. Designation and safety classification
    Supersedes BS ISO 817:2005
  • BS ISO 1986-1:2014 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Testing of the accuracy. Machines with table length of up to 1 600 mm
    Supersedes BS ISO 1986-1:2001
  • BS ISO 2000:2014 Rubber, raw natural. Guidelines for the specification of technically specified rubber (TSR)
    Supersedes BS ISO 2000:2003
  • BS ISO 3468:2014 Passenger cars. Windscreen defrosting and demisting systems. Test method
  • BS ISO 3529-3:2014 Vacuum technology. Vocabulary. Total and Partial pressure vacuum gauges
  • BS ISO 3534-4:2014 Statistics. Vocabulary and symbols. Survey sampling
  • BS ISO 4250-1:2014 Earth-mover tyres and rims. Tyre designation and dimensions
    Supersedes BS ISO 4250-1:2006
  • BS ISO 4250-2:2014 Earth-mover tyres and rims. Loads and inflation pressures
    Supersedes BS ISO 4250-2:2006
  • BS ISO 5145:2014 Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning
    Supersedes BS ISO 5145:2004+A2:2008
  • BS ISO 5149-1:2014 Refrigerating systems and heat pumps. Safety and environmental requirements. Definitions, classification and selection criteria
  • BS ISO 5149-2:2014 Refrigerating systems and heat pumps. Safety and environmental requirements. Design, construction, testing, marking and documentation
  • BS ISO 5149-3:2014 Refrigerating systems and heat pumps. Safety and environmental requirements. Installation site
  • BS ISO 6550-4:2014 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs
    Supersedes BS ISO 6550-4:2009
  • BS ISO 6707-1:2014 Buildings and civil engineering works. Vocabulary. General terms
    Supersedes BS 6100-1:2004
  • BS ISO 6707-2:2014 Building and civil engineering works. Vocabulary. Contract terms
    Supersedes BS 6100-10:2007
  • BS ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
  • BS ISO 7240-1:2014 Fire detection and alarm systems. General and definitions
  • BS ISO 8513:2014 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the apparent initial longitudinal tensile strength
  • BS ISO/IEC/IEEE 8802-1AB:2014 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Station and Media Access Control Connectivity Discovery
  • BS ISO/IEC/IEEE 8802-1AR:2014 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Secure device identity
  • BS ISO/IEC/IEEE 8802-1AS:2014 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Timing and synchronization for time-sensitive applications in bridged local area networks
  • BS ISO 8820-9:2014 Road vehicles. Fuse-links. Fuse-links with shortened tabs (Type K)
  • BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
    Supersedes BS ISO 9276-2:2001
  • BS ISO 10327:2014 Air cargo. Main deck containers. Design and testing
    Supersedes BS M 84:1995
  • BS ISO 10788:2014 Space systems. Lunar simulants
  • BS ISO 10844:2014 Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres
    Supersedes BS ISO 10844:2011
  • BS ISO 11077:2014 Aircraft ground equipment. De-icers. Functional requirements
    Supersedes BS M 77:1994
  • BS ISO 11270:2014 Intelligent transport systems. Lane keeping assistance systems (LKAS). Performance requirements and test procedures
  • BS ISO 11620:2014 Information and documentation. Library performance indicators
    Supersedes BS ISO 11620:2008
  • BS ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
    Supersedes BS ISO 11663:2009
  • BS ISO 11676:2014 Textile machinery and accessories. Pattern disks and pattern chains for warp knitting machines. Vocabulary and symbols
  • BS ISO 11783-3:2014 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Data link layer
    Supersedes BS ISO 11783-3:2007
  • BS ISO 11992-2:2014 Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Application layer for brakes and running gear
  • BS ISO 11992-4:2014 Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Diagnostic communication
    Supersedes BS ISO 11992-4:2005
  • BS ISO 12044:2014 Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
    Supersedes BS ISO 12044:1995
  • BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
  • BS ISO 12219-5:2014 Interior air of road vehicles. Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Static chamber method
  • BS ISO 12405-3:2014 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. Safety performance requirements
  • BS ISO 12653-3:2014 Electronic imaging. Test target for scanning of office documents. Test target for use in lower resolution applications
  • BS ISO 13106:2014 Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs
  • BS ISO 13165-2:2014 Water quality. Radium-226. Test method using emanometry
  • BS ISO 13179-1:2014 Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants. General requirements
  • BS ISO 13322-1:2014 Particle size analysis. Image analysis methods. Static image analysis methods
    Supersedes BS ISO 13322-1:2005
  • BS ISO 13612-1:2014 Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems. Design and dimensioning
  • BS ISO 13612-2:2014 Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems. Energy calculation
  • BS ISO 13820:2014 Paper, board and corrugated fibreboard. Description and calibration of compression testing equipment
    Supersedes BS ISO 13820:1996
  • BS ISO 13959:2014 Water for haemodialysis and related therapies
    Supersedes BS ISO 13959:2009
  • BS ISO 14104:2014 Gears. Surface temper etch inspection after grinding, chemical method
    Supersedes BS 7862:1996
  • BS ISO 14785:2014 Tourist information offices. Tourist information and reception services. Requirements
  • BS ISO 14955-1:2014 Machine tools. Environmental evaluation of machine tools. Design methodology for energy efficient machine tools
  • BS ISO 15000-5:2014 Electronic Business Extensible Markup Language (ebXML). Core Components Specification (CCS)
  • BS ISO/IEC 15026-1:2013 Systems and software engineering. Systems and software assurance. Concepts and vocabulary
    Supersedes PD ISO/IEC TR 15026-1:2010
  • BS ISO 15114:2014 Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
  • BS ISO 15118-2:2014 Road vehicles. Vehicle-to-Grid Communication Interface. Network and application protocol requirements
  • BS ISO 15510:2014 Stainless steels. Chemical composition
    Supersedes BS ISO 15510:2010
  • BS ISO 15625:2014 Silk. Electronic test method for defects and evenness of raw silk
  • BS ISO 15985:2014 Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
    Supersedes BS ISO 15985:2004
  • BS ISO 16000-29:2014 Indoor air. Test methods for VOC detectors
  • BS ISO 16000-31:2014 Indoor air. Measurement of flame retardants and plasticizers based on organophosphorus compounds. Phosphoric acid ester
  • BS ISO 16063-16:2014 Methods for the calibration of vibration and shock transducers. Calibration by Earth’s gravitation
    Supersedes BS 6955-5:1994
  • BS ISO 16065-1:2014 Pulps. Determination of fibre length by automated optical analysis. Polarized light method
    Supersedes BS ISO 16065-1:2001
  • BS ISO 16126:2014 Space systems. Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal
  • BS ISO 16143-1:2014 Stainless steels for general purposes. Corrosion resistant flat products
  • BS ISO 16143-2:2014 Stainless steels for general purposes. Corrosion resistant semi-finished products, bars, rods and sections
  • BS ISO 16143-3:2014 Stainless steels for general purposes. Wire
  • BS ISO 16345:2014 Water-cooling towers. Testing and rating of thermal performance
  • BS ISO 16365-1:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Designation system and basis for specifications
  • BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Preparation of test specimens and determination of properties
  • BS ISO 16365-3:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Distinction between ether and ester polyurethanes by determination of the ester group content
  • BS ISO 16457:2014 Space systems. Space environment (natural and artificial). The Earth’s ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
    Supersedes DD ISO/TS 16457:2009
  • BS ISO 16928:2014 Essential oil of ginger [Zingiber officinale Roscoe]
  • BS ISO 16462:2014 Cubic boron nitride inserts, tipped or solid. Dimensions, types
    Supersedes BS ISO 16462:2004
  • BS ISO 16463:2014 Polycristalline diamond inserts, tipped. Dimensions, types
    Supersedes BS ISO 16463:2004
  • BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. General test methods
  • BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of electrical characteristics for use in electronic assemblies
  • BS ISO 16525-3:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of heat transfer properties
  • BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
  • BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear fatigue
  • BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of pendulum-type shear impact
  • BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Environmental test methods
  • BS ISO 16525-8:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Electrochemical-migration test methods
  • BS ISO 16525-9:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of high speed signal-transmission characteristics
  • BS ISO 16571:2014 Systems for evacuation of plume generated by medical devices
  • BS ISO 16972:2010 Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement
  • BS ISO 17094:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
  • BS ISO 17140:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
  • BS ISO 17161:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
  • BS ISO 17185-1:2014 Intelligent transport systems. Public transport user information. Standards framework for public information systems
  • BS ISO 17215-1:2014 Road vehicles. Video communication interface for cameras (VCIC). General information and use case definition
  • BS ISO 17217-1:2014 Traditional Chinese medicine. Ginseng seeds and seedlings. Panax ginseng C.A. Meyer
  • BS ISO 17218:2014 Sterile acupuncture needles for single use
  • BS ISO 17221:2014 Plastics. Determination of image clarity (degree of sharpness of reflected or transmitted image)
  • BS ISO 17340:2014 Metallic materials. Ductility testing. High speed compression test for porous and cellular metals
  • BS ISO 17411:2014 Optics and photonics. Optical materials and components. Test method for homogeneity of optical glasses by laser interferometry
  • BS ISO 17440:2014 Cranes. General design. Limit states and proof of competence of forged steel hooks
  • BS ISO 17484-1:2014 Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Specifications for systems
    Supersedes BS ISO 17484-1:2006
  • BS ISO 17860:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of drying loss of ceramic granules
  • BS ISO 17861:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral transmittance of fine ceramics thin films under humid condition
  • BS ISO 18061:2014 Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics). Determination of antiviral activity of semiconducting photocatalytic materials. Test method using bacteriophage Qbeta
  • BS ISO 18431-3:2014 Mechanical vibration and shock. Signal processing. Methods of time-frequency analysis
  • BS ISO 18436-7:2014 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Thermography
    Supersedes BS ISO 18436-7:2008
  • BS ISO 18944:2014 Imaging materials. Reflection colour photographic prints. Test print construction and measurement
    Supersedes BS ISO 18944:2012
  • BS ISO/IEC 19099:2014 Information technology. Virtualization Management Specification
  • BS ISO 19292:2014 Ships and marine technology. Lifesaving and fire protection. Point-type resettable flame detectors for ships
  • BS ISO 20562:2014 Tyre valves. ISO core chambers No. 1, No. 2, No. 3 and No. 4
  • BS ISO 21010:2014 Cryogenic vessels. Gas/materials compatibility
    Supersedes BS ISO 21010:2004
  • BS ISO 21101:2014 Adventure tourism. Safety management systems. Requirements
  • BS ISO 21103:2014 Adventure tourism. Information for participants
  • BS ISO 21217:2014 Intelligent transport systems. Communications access for land mobiles (CALM). Architecture
    Supersedes BS ISO 21217:2010
  • BS ISO 22007-6:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
  • BS ISO 22493:2014 Microbeam analysis. Scanning electron microscopy. Vocabulary
    Supersedes BS ISO 22493:2008
  • BS ISO/IEC 23009-1:2014 Information technology. Dynamic adaptive streaming over HTTP (DASH). Media presentation description and segment formats
  • BS ISO 23462:2014 Space systems. Guidelines to define the management framework for a space project
    Supersedes PD ISO/TR 23462:2007
  • BS ISO 23500:2014 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
    Supersedes BS ISO 23500:2011
  • BS ISO 23551-5:2014 Safety and control devices for gas burners and gas-burning appliances. Manual gas valves
  • BS ISO 24035:2014 Belt drives. V-belts and the corresponding pulleys for agricultural machineries. Dimensions
  • BS ISO 24615-1:2014 Language resource management. Syntactic annotation framework (SynAF). Syntactic model
    Supersedes BS ISO 24615:2010
  • BS ISO 25761:2014 Plastics. Polyols for use in the production of polyurethanes. Determination of basicity (total amine value), expressed as percent nitrogen
    Supersedes BS ISO 25761:2008
  • BS ISO 26722:2014 Water treatment equipment for haemodialysis applications and related therapies
    Supersedes BS ISO 26722:2009
  • BS ISO/IEC 27036-1:2014 Information technology. Security techniques. Information security for supplier relationships. Overview and concepts
  • BS ISO/IEC 29109-5:2014 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Face image data
    Supersedes BS ISO/IEC 29109-5:2012
  • BS ISO 29991:2014 Language learning services outside formal education. Requirements
  • BS ISO 37120:2014 Sustainable development of communities. Indicators for city services and quality of life
  • BS ISO 55000 Series Asset management. Overview, principles and terminology
    Supersedes BS ISO 55000/01/02 Asset Management Pack
  • BS IEC 62843:2013 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment

Publicly Available Specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full standard has yet to be published.

  • PAS 44:2014 Official identification for cattle. Specification
    Supersedes PAS 44:2009
  • PAS 66:2014 Official identification eartags for sheep and goats. Specification
    Supersedes PAS 66:2009
  • PAS 754:2014 Software Trustworthiness. Governance and management. Specification
  • PAS 1008:2014 Specification for the performance and testing of a single-use flexitank
  • PAS 2060:2014 Specification for the demonstration of carbon neutrality
    Supersedes PAS 2060:2010

Corrigenda to British standards and updated British standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended standards and corrigenda to British standards were made available last month.

  • BS 476-20:1987 Fire tests on building materials and structures. Method for determination of the fire resistance of elements of construction (general principles)
    CORRIGENDUM 1
  • BS 476-21:1987 Fire tests on building materials and structures. Methods for determination of the fire resistance of loadbearing elements of construction
    CORRIGENDUM 1
  • BS 476-22:1987 Fire tests on building materials and structures. Method for determination of the fire resistance of non-loadbearing elements of construction
    CORRIGENDUM 1
  • BS 476-24:1987 (ISO 6944:1985) Fire tests on building materials and structures. Method for determination of the fire resistance of ventilation ducts
    CORRIGENDUM 1
  • BS 3643-2:2007 ISO metric screw threads. Specification for selected limits of size
    CORRIGENDUM 1
  • BS 5228-2:2009+A1:2014 Code of practice for noise and vibration control on construction and open sites. Vibration
    AMENDMENT 1
  • BS 7928:2013 Specification for head protectors for cricketers
    CORRIGENDUM 1
  • BS 8417:2011+A1:2014 Preservation of wood. Code of practice
    AMENDMENT 1
  • BS EN 31:2011+A1:2014 Wash basins. Connecting dimensions
    AMENDMENT 1
  • BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties
    AMENDMENT 3
  • BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
    AMENDMENT 1
  • BS EN 206:2013 Concrete. Specification, performance, production and conformity
    CORRIGENDUM 1
  • BS EN 474-1:2006+A4:2013 Earth-moving machinery. Safety. General requirements
    CORRIGENDUM 1
  • BS EN 1092-1:2007+A1:2013 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories PN designated. Steel flanges
    CORRIGENDUM 1
  • BS EN 1364-4:2014 Fire resistance tests for non-loadbearing elements. Curtain walling. Part configuration
    CORRIGENDUM 1
  • BS EN 1994-1-2:2005+A1:2014 Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design
    AMENDMENT 1
  • BS EN 1995-1-1:2004+A2:2014 Eurocode 5: Design of timber structures. General. Common rules and rules for buildings
    AMENDMENT 2
  • BS EN 2267-009:2013 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between - 55ºC and 260ºC. DRA family, single and multicore assembly. Product standard
    CORRIGENDUM 1
  • BS EN ISO 3691-6:2013 Industrial trucks. Safety requirements and verification. Burden and personnel carriers
    CORRIGENDUM 1
  • BS EN ISO 4833-2:2013 Microbiology of the food chain. Horizontal method for the enumeration of microorganisms. Colony count at 30 degrees C by the surface plating technique
    CORRIGENDUM 1
  • BS EN ISO 5361:2012 Anaesthetic and respiratory equipment. Tracheal tubes and connectors
    CORRIGENDUM 1
  • BS EN ISO 6883:2014 Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air)
    CORRIGENDUM 1
  • BS EN ISO 8407:2014 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
    CORRIGENDUM 1
  • BS EN ISO 8586:2014 Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
    CORRIGENDUM 1
  • BS EN 10152:2009 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
    CORRIGENDUM 1
  • BS EN ISO 10555-1:2013 Intravascular catheters. Sterile and single-use catheters. General requirements
    CORRIGENDUM 1
  • BS EN ISO 11272:2014 Soil quality. Determination of dry bulk density
    CORRIGENDUM 1
  • BS EN ISO 11274:2014 Soil quality. Determination of the water retention characteristic. Laboratory methods
    CORRIGENDUM 1
  • BS EN ISO 11275:2014 Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind’s evaporation method
    CORRIGENDUM 1
  • BS EN ISO 11276:2014 Soil quality. Determination of pore water pressure. Tensiometer method
    CORRIGENDUM 1
  • BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
    CORRIGENDUM 1
  • BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
    CORRIGENDUM 1
  • BS EN 12183:2014 Manual wheelchairs. Requirements and test methods
    CORRIGENDUM 1
  • BS EN ISO 12671:2014 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
    CORRIGENDUM 1
  • BS EN ISO 12677:2011 Chemical analysis of refractory products by Xray fluorescence (XRF). Fused cast-bead method
    CORRIGENDUM 1
  • BS EN 12828:2012+A1:2014 Heating systems in buildings. Design for water based heating systems
    AMENDMENT 1
  • BS EN ISO 12872:2014 Olive oils and olive-pomace oils. Determination of the 2-glyceryl monopalmitate content
    CORRIGENDUM 1
  • BS EN ISO 12873:2014 Olive oils and olive-pomace oils. Determination of wax content by capillary gas chromatography
    CORRIGENDUM 1
  • BS EN 13044-1:2011 Intermodal Loading Units. Marking. Markings for identification
    CORRIGENDUM 1
  • BS EN 13197:2011+A1:2014 Road marking materials. Wear simulator. Turntable
    AMENDMENT 1
  • BS EN ISO 13274:2013 Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
    CORRIGENDUM 2
  • BS EN 13481-2:2012 Railway applications. Track. Performance requirements for fastening systems. Fastening systems for concrete sleepers
    CORRIGENDUM 1
  • BS EN 13779:2007 Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
    CORRIGENDUM 1
  • BS EN 13964:2014 Suspended ceilings. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
    CORRIGENDUM 1
  • BS EN 14214:2012+A1:2014 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods
    AMENDMENT 1
  • BS EN 15154-1:2006 Emergency safety showers. Plumbed-in body showers for laboratories
    CORRIGENDUM 1
  • BS EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems. Offshore pipelines
    CORRIGENDUM 1
  • BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
    CORRIGENDUM 1
  • BS EN ISO 15971:2014 Natural gas. Measurement of properties. Calorific value and Wobbe index
    CORRIGENDUM 1
  • BS EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads. Single-track two-wheel motor vehicles. Safety requirements and test methods
    CORRIGENDUM 1
  • BS EN 16120:2012+A1:2014 Child use and care articles. Chair mounted seat
    AMENDMENT 1
  • BS EN ISO 16283-1:2014 Acoustics. Field measurement of sound insulation in buildings and of building elements. Airborne sound insulation
    CORRIGENDUM 1
  • BS EN ISO 16665:2013 Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
    CORRIGENDUM 1
  • BS EN ISO 16635-1:2014 Dentistry. Dental rubber dam technique. Hole punch
    CORRIGENDUM 1
  • BS EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting
    CORRIGENDUM 1
  • BS EN ISO 18772:2014 Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
    CORRIGENDUM 1
  • BS EN ISO 19125-1:2006 Geographic information. Simple feature access. Common architecture
    CORRIGENDUM 1
  • BS EN ISO 20753:2014 Plastics. Test specimens
    CORRIGENDUM 1
  • mm

    Here are recent publications from the British Standards Institution (BSI), together with announcements of supersession and withdrawal. Hard copy and PDF formats of BSI standards are available for purchase from our website www.standards.co.nz by entering the standard number.

    British standards

    The publications listed below are new and revised British standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British standards withdrawn’ section.

    • BS 6798:2014 Specification for selection, installation, inspection, commissioning, servicing and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
      Supersedes BS 6798:2009
    • BS 8591:2014 Remote centres receiving signals from alarm systems. Code of practice
      Supersedes BS 5979:2007
    • BS 8607:2014 Mechanically operated push-button locksets. Requirements and test methods
    • BS 11200:2014 Crisis management. Guidance and good practice

    BS EN standards

    The following are British standard implementations of the English language versions of European standards (ENs). The date referenced in the identifier is the date of the European standard.

    • BS EN 35:2014 Pedestal and wall-hung bidets with over-rim supply. Connecting dimensions
      Supersedes BS EN 35:2000 and BS EN 36:1999
    • BS EN 71-7:2014 Safety of toys. Finger paints. Requirements and test methods
      Supersedes BS EN 71-7:2002
    • BS EN 81-22:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Electric lifts with inclined path
    • BS EN 250:2014 Respiratory equipment. Open-circuit selfcontained compressed air diving apparatus. Requirements, testing and marking
      Supersedes BS EN 250:2000
    • BS EN 690:2013 Agricultural machinery. Manure spreaders. Safety
      Supersedes BS EN 690:1994+A1:2009
    • BS EN 851:2014 Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications
      Supersedes BS EN 851:1996
    • BS EN 933-6:2014 Tests for geometrical properties of aggregates. Assessment of surface characteristics. Flow coefficient of aggregates
      Supersedes BS EN 933-6:2001
    • BS EN 941:2014 Aluminium and aluminium alloys. Circle and circle stock for the production of general applications. Specifications
      Supersedes BS EN 941:1996
    • BS EN 1097-10:2014 Tests for mechanical and physical properties of aggregates. Determination of water suction height
      Supersedes BS EN 1097-10:2002
    • BS EN 1143-2:2014 Secure storage units. Requirements, classification and methods of tests for resistance to burglary. Deposit systems
      Supersedes BS EN 1143-2:2001
    • BS EN 1367-7:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing of Lightweight aggregates
    • BS EN 1367-8:2014 Tests for thermal and weathering properties of aggregates. Determination of resistance to disintegration of Lightweight Aggregates
    • BS EN 1422:2014 Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods
      Supersedes BS EN 1422:1997+A1:2009
    • BS EN 1860-1:2013 Appliances, solid fuels and firelighters for barbecueing. Barbecues burning solid fuels. Requirements and test methods
    • BS EN 1866-2:2014 Mobile fire extinguishers. Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
      Supersedes BS EN 1866:2005
    • BS EN 1873:2014 Prefabricated accessories for roofing. Individual rooflights of plastics. Product specification and test methods
      Supersedes BS EN 1873:2005
    • BS EN 2402:2014 Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3. Annealed. Wire. D ≤ 10 mm
    • BS EN 3475-514:2014 Aerospace series. Cables, electrical, aircraft use. Test methods. Porosity of copper cladding on aluminium strands
      Supersedes BS EN 3475-514:2007
    • BS EN 4057-402:2014 Aerospace series. Cable ties for harnesses. Test methods. Life cycle
      Supersedes BS EN 4057-402:2006
    • BS EN 4199-003:2014 Aerospace series. Bonding straps for aircraft. Bonding strap assemblies with flat braided conductor copper, tin plated -65ºC up to 150ºC and copper, nickel plated -65ºC up to 260ºC. Product standard
      Supersedes BS EN 4199-003:2009
    • BS EN 4293:2014 Aerospace series. Aluminium alloy AL-P7175. T73511. Extruded bar and section. a or D ≤ 150 mm
    • BS EN 4549:2014 Aerospace series. Pipe coupling, in heat resisting steel or in heat resisting nickel alloy. Coupling end, welded. Design configuration. Inch series
      Supersedes BS EN 4549:2003
    • BS EN 4627:2014 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De ≤ 200 mm. 1 150 MPa ≤ Rm ≤ 1 300 MPa
      Supersedes BS EN 4627:2007
    • BS EN 4651:2014 Aerospace series. Copper-clad aluminium alloy conductors for electrical cables. Product standard
    • BS EN 4707:2014 Aerospace series. Acid pickling of aluminium and aluminum alloy without hexavalent chromium
    • BS EN 4708-001:2014 Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification. Technical specification
    • BS EN 6059-406:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Vibration
    • BS EN 6059-601:2014 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Open and close
    • BS EN ISO 8331:2014 Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
      Supersedes BS EN ISO 8331:2011
    • BS EN ISO 9173-3:2014 Dentistry. Extraction forceps. Design
    • BS EN ISO 10079-2:2014 Medical suction equipment. Manually powered suction equipment
      Supersedes BS EN ISO 10079-2:2009
    • BS EN ISO 10079-3:2014 Medical suction equipment. Suction equipment powered from a vacuum or positive pressure gas source
      Supersedes BS EN ISO 10079-3:2009
    • BS EN ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation. Gas-phase air cleaning media
    • BS EN ISO 11133:2014 Microbiology of food, animal feed and water. Preparation, production, storage and performance testing of culture media
      Supersedes DD CEN ISO/TS 11133-1:2009 and DD CEN ISO/TS 11133-2:2003+A1:2011
    • BS EN 12042:2014 Food processing machinery. Automatic dough dividers. Safety and hygiene requirements
      Supersedes BS EN 12042:2005+A1:2010
    • BS EN 12110:2014 Tunnelling machines. Air locks. Safety requirements
      Supersedes BS EN 12110:2002+A1:2008
    • BS EN 12111:2014 Tunnelling machines. Road headers and continuous miners. Safety requirements
      Supersedes BS EN 12111:2002+A1:2009
    • BS EN 12183:2014 Manual wheelchairs. Requirements and test methods
      Supersedes BS EN 12183:2009
    • BS EN 12184:2014 Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
      Supersedes BS EN 12184:2009
    • BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
      Supersedes BS EN 12252:2012
    • BS EN 12312-2:2014 Aircraft ground support equipment. Specific requirements. Catering vehicles
      Supersedes BS EN 12312-2:2002+A1:2009
    • BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
      Supersedes BS EN 12341:1999 and BS EN 14907:2005
    • BS EN 12597:2014 Bitumen and bituminous binders. Terminology
      Supersedes BS EN 12597:2000
    • BS EN ISO 12625-3:2014 Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density and bulk
      Supersedes BS EN ISO 12625-3:2005
    • BS EN ISO 12625-7:2014 Tissue paper and tissue products. Determination of optical properties. Measurement of brightness and colour with D65/10º (outdoor daylight)
      Supersedes BS EN ISO 12625-7:2007
    • BS EN 12697-7:2014 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
      Supersedes BS EN 12697-7:2002
    • BS EN 12823-1:2014 Foodstuffs. Determination of vitamin A by high performance liquid chromatography. Measurement of all-E-retinol and 13-Z-retinol
      Supersedes BS EN 12823-1:2000
    • BS EN 12878:2014 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
      Supersedes BS EN 12878:2005
    • BS EN 12881-1:2014 Conveyor belts. Fire simulation flammability testing. Propane burner tests
      Supersedes BS EN 12881-1:2005+A1:2008
    • BS EN 12945:2014 Liming materials. Determination of neutralizing value. Titrimetric methods
      Supersedes BS EN 12945:2008
    • BS EN ISO 12999-1:2014 Acoustics. Determination and application of measurement uncertainties in building acoustics. Sound insulation
      Supersedes BS EN 20140-2:1993
    • BS EN ISO 13354:2014 Petroleum and natural gas industries. Drilling and production equipment. Shallow gas diverter equipment
    • BS EN 13555:2014 Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
      Supersedes BS EN 13555:2004
    • BS EN 13859-1:2014 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing
      Supersedes BS EN 13859-1:2010
    • BS EN 13859-2:2014 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls
      Supersedes BS EN 13859-2:2010
    • BS EN 13924-2:2014 Bitumen and bituminous binders. Specification framework for special paving grade bitumen. Multigrade paving grade bitumens
    • BS EN ISO 13935-1:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the strip method
      Supersedes BS EN ISO 13935-1:1999
    • BS EN ISO 13935-2:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the grab method
      Supersedes BS EN ISO 13935-2:1999
    • BS EN ISO 14114:2014 Gas welding equipment. Acetylene manifold systems for welding, cutting and allied processes. General requirements
      Supersedes BS EN ISO 14114:1999
    • BS EN 14180:2014 Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing
      Supersedes BS EN 14180:2003+A2:2009
    • BS EN ISO 14453:2014 Pulps. Determination of acetone-soluble matter
      Supersedes BS EN ISO 14453:2000
    • BS EN ISO 14555:2014 Welding. Arc stud welding of metallic materials
      Supersedes BS EN ISO 14555:2006
    • BS EN 14570:2014 LPG equipment and accessories. Equipping of overground and underground LPG vessels
      Supersedes BS EN 14570:2005
    • BS EN 14700:2014 Welding consumables. Welding consumables for hard-facing
      Supersedes BS EN 14700:2005
    • BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
      Supersedes BS EN 14893:2006
    • BS EN 14908-1:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Protocol Stack
      Supersedes BS EN 14908-1:2005
    • BS EN 14908-2:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Twisted Pair Communication
      Supersedes BS EN 14908-2:2005
    • BS EN 14908-3:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. Power Line Channel Specification
      Supersedes BS EN 14908-3:2006
    • BS EN 14908-4:2014 Open Data Communication in Building Automation, Controls and Building Management. Control Network Protocol. IP Communication
      Supersedes BS EN 14908-4:2006
    • BS EN 15208:2014 Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications
      Supersedes BS EN 15208:2007
    • BS EN 15362:2014 Chemicals used for treatment of swimming pool water. Sodium carbonate
      Supersedes BS EN 15362:2007
    • BS EN 15363:2014 Chemicals used for treatment of swimming pool water. Chlorine
      Supersedes BS EN 15363:2007
    • BS EN 15497:2014 Structural finger jointed solid timber. Performance requirements and minimum production requirements
      Supersedes BS EN 385:2001
    • BS EN 15514:2014 Chemicals used for treatment of swimming pool water. Hydrochloric acid
      Supersedes BS EN 15514:2007
    • BS EN 15534-4:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for decking profiles and tiles
      Together with BS EN 15534-5:2014 it supersedes DD CEN/TS 15534-3:2007, which is withdrawn
    • BS EN 15534-5:2014 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)). Specifications for cladding profiles and tiles
      Together with BS EN 15534-4:2014 it supersedes DD CEN/TS 15534-3:2007, which is withdrawn
    • BS EN ISO 15758:2014 Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
      Supersedes BS EN 14114:2002
    • BS EN 15888:2014 Transportable gas cylinders. Cylinder bundles. Periodic inspection and testing
    • BS EN 16070:2014 Products used for treatment of water intended for human consumption. Natural zeolite
    • BS EN 16191:2014 Tunnelling machinery. Safety requirements
      Supersedes BS EN 12336:2005+A1:2008 and BS EN 815:1996+A2:2008
    • BS EN 16203:2014 Safety of Industrial Trucks. Dynamic tests for verification of lateral stability. Counterbalanced Trucks
    • BS EN 16287-1:2014 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 1 finish
    • BS EN 16287-2:2014 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 1 finish
    • BS EN 16288-1:2014 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 3 finish
    • BS EN 16288-2:2014 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 3 finish
    • BS EN 16290-1:2014 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 7,5 R finish
    • BS EN 16290-2:2014 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 7,5 R finish
    • BS EN 16307-6:2014 Industrial trucks. Safety requirements and verification. Supplementary requirements for burden and personnel carriers
    • BS EN 16323:2014 Glossary of wastewater engineering terms
      Partially supersedes BS EN 1085:2007
    • BS EN 16350:2014 Protective gloves. Electrostatic properties
    • BS EN 16392-2:2014 Non-destructive testing. Characterisation and verification of ultrasonic phased array equipment. Probes
    • BS EN 16418:2014 Paper and board. Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2)
    • BS EN 16436-1:2014 Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase. Hoses and tubings
    • BS EN 16437:2014 Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action. Test method and requirements (phase 2, step 2)
    • BS EN 16472:2014 Plastics. Method for artificial accelerated photo-ageing using medium pressure mercury vapour lamps
    • BS EN ISO 16484-5:2014 Building automation and control systems (BACS). Data communication protocol
      Supersedes BS EN ISO 16484-5:2012
    • BS EN 16485:2014 Round and sawn timber. Environmental Product Declarations. Product category rules for wood and wood-based products for use in construction
    • BS EN 16489-1:2014 Professional indoor UV exposure services. Requirements for the provision of training
    • BS EN 16521:2014 Cosmetics. Analytical methods. GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection
    • BS EN 16522:2014 Tanks for transport of dangerous goods. Service equipment for tanks. Flame arresters for breather devices
    • BS EN 16566:2014 Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards
    • BS EN 16590-1:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. General principles for design and development
      Supersedes BS ISO 25119-1:2010
    • BS EN 16590-2:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Concept phase
      Supersedes BS ISO 25119-2:2010
    • BS EN 16590-3:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Series development, hardware and software
      Supersedes BS ISO 25119-3:2010
    • BS EN 16590-4:2014 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Production, operation, modification and supporting processes
      Supersedes BS ISO 25119-4:2010
    • BS EN 16701:2014 Energetic materials for defence. Safety, vulnerability. Friability
    • BS EN ISO 17184:2014 Soil quality. Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)
    • BS EN ISO 18542-2:2014 Road vehicles. Standardized repair and maintenance information (RMI) terminology. Standardized process implementation requirements, Registration Authority
    • BS EN ISO 19115-1:2014 Geographic information. Metadata. Fundamentals
      Supersedes BS EN ISO 19115:2005
    • BS EN ISO 19117:2014 Geographic information. Portrayal
      Supersedes BS EN ISO 19117:2006
    • BS EN ISO 21670:2014 Fasteners. Hexagon weld nuts with flange
    • BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements. Automatic and semi-automatic valves
      Supersedes BS EN ISO 23553-1:2009
    • BS EN ISO 24801-1:2014 Recreational diving services. Requirements for the training of recreational scuba divers. Level 1. Supervised diver
      Supersedes BS EN 14153-1:2003
    • BS EN ISO 24801-2:2014 Recreational diving services. Requirements for the training of recreational scuba divers. Level 2. Autonomous diver
      Supersedes BS EN 14153-2:2003
    • BS EN ISO 24801-3:2014 Recreational diving services. Requirements for the training of recreational scuba divers. Level 3. Dive leader
      Supersedes BS EN 14153-3:2003
    • BS EN ISO 24802-1:2014 Recreational diving services. Requirements for the training of scuba instructors. Level 1
      Supersedes BS EN 14413-1:2004
    • BS EN ISO 24802-2:2014 Recreational diving services. Requirements for the training of scuba instructors. Level 2
      Supersedes BS EN 14413-2:2004
    • BS EN ISO 27627:2014 Petroleum and natural gas industries. Aluminium alloy drill pipe thread connection gauging
    • BS EN 28510-1:2014 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 90º peel
      Supersedes BS EN 28510-1:1993
    • BS EN 50125-1:2014 Railway applications. Environmental conditions for equipment. Rolling stock and on-board equipment
      Supersedes BS EN 50125-1:1999
    • BS EN 50153:2014 Railway applications. Rolling stock. Protective provisions relating to electrical hazards
      Supersedes BS EN 50153:2002
    • BS EN 50173-6:2013 Information technology. Generic cabling systems. Distributed building services
    • BS EN 50289-3-8:2013 Communication cables. Specifications for test methods. Mechanical test methods. Abrasion resistance of cable sheath markings
      Supersedes BS EN 50289-3-8:2001
    • BS EN 50343:2014 Railway applications. Rolling stock. Rules for installation of cabling
      Supersedes BS EN 50343:2003
    • BS EN 50407-3:2014 Multi-pair cables used in high bit rate digital access telecommunications networks. Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP
    • BS EN 50585:2014 Communications protocol to transport satellite delivered signals over IP networks
    • BS EN 50599:2014 Generic cabling systems. Specification for the testing of balanced communication cabling in accordance with EN 50173-4. Screened straight patch cords and straight work area cords for class D applications. Detail specification
    • BS EN 50600-2-1:2014 Information technology. Data centre facilities and infrastructures. Building construction
    • BS EN 50600-2-2:2014 Information technology. Data centre facilities and infrastructures. Power distribution
    • BS EN 60255-27:2014 Measuring relays and protection equipment. Product safety requirements
      Supersedes BS EN 60255-27:2005
    • BS EN 60317-52:2014 Specifications for particular types of winding wires. Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220
      Supersedes BS EN 60317-52:1999
    • BS EN 60335-2-27:2013 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
      Supersedes BS EN 60335-2-27:2010 which remains current
    • BS EN 60358-3:2014 Coupling capacitors and capacitor dividers. AC or DC coupling capacitors for harmonic-filters applications
      Supersedes BS 7578:1992 which remains current
    • BS EN 60695-1-40:2014 Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids
    • BS EN 60695-9-2:2014 Fire hazard testing. Surface spread of flame. Summary and relevance of test methods
      Supersedes DD IEC/TS 60695-9-2:2005
    • BS EN 60721-2-9:2014 Classification of environmental conditions. Environmental conditions appearing in nature. Measured shock and vibration data. Storage, transportation and in-use
    • BS EN 60754-1:2014 Test on gases evolved during combustion of materials from cables. Determination of the halogen acid gas content
      Supersedes BS EN 50267-1:1999, BS EN 50267-2-1:1999, BS EN 50267-2-2:1999 and BS EN 50267-2-3:1999 which remain current
    • BS EN 60754-2:2014 Test on gases evolved during combustion of materials from cables. Determination of acidity (by pH measurement) and conductivity
      Supersedes BS EN 50267-1:1999, BS EN 50267-2-1:1999, BS EN 50267-2-2:1999 and BS EN 50267-2-3:1999 which remain current
    • BS EN 60793-1-51:2014 Optical fibres. Measurement methods and test procedures. Dry heat (steady state) tests
      Supersedes BS EN 60793-1-51:2002
    • BS EN 60793-1-52:2014 Optical fibres. Measurement methods and test procedures. Change of temperature tests
      Supersedes BS EN 60793-1-52:2002
    • BS EN 60793-1-53:2014 Optical fibres. Measurement methods and test procedures. Water immersion tests
      Supersedes BS EN 60793-1-53:2002
    • BS EN 60794-1-20:2014 Optical fibre cables. Generic specification. Basic optical cable test procedures. General and definitions
      Supersedes BS EN 60794-1-2:2003 which remains current
    • BS EN 60794-2-20:2014 Optical fibre cables. Indoor cables. Family specification for multi-fibre optical cables
      Supersedes BS EN 60794-2-20:2010
    • BS EN 60794-5-10:2014 Optical fibre cables. Family specification. Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
    • BS EN 60794-5-20:2014 Optical fibre cables. Family specification. Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
    • BS EN 60819-3-4:2014 Non-cellulosic papers for electrical purposes. Specifications for individual materials. Aramid fibre paper containing not more than 50 % of mica particles
      Supersedes BS EN 60819-3-4:2002 which remains current
    • BS EN 60974-3:2014 Arc welding equipment. Arc striking and stabilizing devices
      Supersedes BS EN 60974-3:2007
    • BS EN 61300-2-42:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Static side load for strain relief
      Supersedes BS EN 61300-2-42:2005
    • BS EN 61300-3-52:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangular ferrule, single mode fibres
    • BS EN 61375-3-4:2014 Electronic railway equipment. Train communication network (TCN). Ethernet Consist Network (ECN)
    • BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d c. Equipment for testing, measuring or monitoring of protective measures. Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    • BS EN 61587-5:2014 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297. Seismic tests for chassis, subracks and plug-in units
    • BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments
    • BS EN 61858-1:2014 Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS). Wire-wound winding EIS
      Supersedes BS EN 61858:2008
    • BS EN 61968-9:2014 Application integration at electric utilities. System interfaces for distribution management. Interfaces for meter reading and control
      Supersedes BS EN 61968-9:2009
    • BS EN 62065:2014 Maritime navigation and radiocommunication equipment and systems. Track control systems. Operational and performance requirements, methods of testing and required test results
      Supersedes BS EN 62065:2002 which remains current
    • BS EN 62074-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic WDM devices. Generic specification
      Supersedes BS EN 62074-1:2009
    • BS EN 62321-2:2014 Determination of certain substances in electrotechnical products. Disassembly, disjointment and mechanical sample preparation
      Supersedes BS EN 62321:2009 which remains current
    • BS EN 62321-3-1:2014 Determination of certain substances in electrotechnical products. Screening. Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
      Supersedes BS EN 62321:2009 which remains current
    • BS EN 62321-3-2:2014 Determination of certain substances in electrotechnical products. Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography
      Supersedes BS EN 62321:2009 which remains current
    • BS EN 62321-4:2014 Determination of certain substances in electrotechnical products. Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICPOES and ICP-MS
      Supersedes BS EN 62321:2009 which remains current
    • BS EN 62321-5:2014 Determination of certain substances in electrotechnical products. Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICPOES and ICP-MS
      Supersedes BS EN 62321:2009 which remains current
    • BS EN 62379-5-2:2014 Common control interface for networked digital audio and video products. Transmission over networks. Signalling (TA4)
    • BS EN 62388:2013 Maritime navigation and radiocommunication equipment and systems. Shipborne radar. Performance requirements, methods of testing and required test results
      Supersedes BS EN 62388:2008 which remains current
    • BS EN 62448:2014 Multimedia systems and equipment. Multimedia e-publishing and e-books. Generic format for e-publishing
      Supersedes BS EN 62448:2009
    • BS EN 62481-1:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines. Architecture and protocols
    • BS EN 62481-5:2014 Digital living network alliance (DLNA) home networked device interoperability guidelines. DLNA Device Profile guidelines
    • BS EN 62555:2014 Ultrasonics. Power measurement. High intensity therapeutic ultrasound (HITU) transducers and systems
    • BS EN 62608-1:2014 Multimedia home network configuration. Basic Reference model. System model
    • BS EN 62676-1-1:2014 Video surveillance systems for use in security applications. System requirements. General
    • BS EN 62676-1-2:2014 Video surveillance systems for use in security applications. System requirements. Performance requirements for video transmission
    • BS EN 62676-2-1:2014 Video surveillance systems for use in security applications. Video transmission protocols. General requirements
    • BS EN 62676-2-2:2014 Video surveillance systems for use in security applications. Video transmission protocols. IP interoperability implementation based on HTTP and REST services
    • BS EN 62676-2-3:2014 Video surveillance systems for use in security applications. Video transmission protocols. IP interoperability implementation based on Web services
    • BS EN 62680-4:2014 Universal serial bus interfaces for data and power. Universal Serial Bus Cables and Connectors Class Document, Revision 2.0
    • BS EN 62770:2014 Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment

     BS ENs implemented by amendment

    • BS EN ISO 6883:2014 Animal and vegetable fats and oils.Determination of conventional mass per volume (litre weight in air)
      Implementation of European Standard EN ISO 6883 by amendment to BS ISO 6883:2007
    • BS EN ISO 8407:2014 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
      Implementation of European Standard EN ISO 8407 by amendment to BS ISO 8407:2009
    • BS EN ISO 8586:2014 Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
      Implementation of European Standard EN ISO 8586 by amendment to BS ISO 8586:2012
    • BS EN ISO 11272:2014 Soil quality. Determination of dry bulk density
      Implementation of European Standard EN ISO 11272 by amendment to BS 7755-5.6:1999
    • BS EN ISO 11274:2014 Soil quality. Determination of the water retention characteristic. Laboratory methods
      Implementation of European Standard EN ISO 11274 by amendment to BS ISO 11274:1998
    • BS EN ISO 11275:2014 Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind’s evaporation method
      Implementation of European Standard EN ISO 11275 by amendment to BS ISO 11275:2004
    • BS EN ISO 11276:2014 Soil quality. Determination of pore water pressure. Tensiometer method
      Implementation of European Standard EN ISO 11276 by amendment to BS 7755-5.1:1996
    • BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
      Implementation of European Standard EN ISO 11357-2 by amendment to BS ISO 11357-2:2013
    • BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
      Implementation of European Standard EN ISO 11357-5 by amendment to BS ISO 11357-5:2013
    • BS EN ISO 12671:2014 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
      Implementation of European Standard EN ISO 12671 by amendment to BS ISO 12671:2012
    • BS EN ISO 12872:2014 Olive oils and olive-pomace oils. Determination of the 2-glyceryl monopalmitate content
      Implementation of European Standard EN ISO 12872 by amendment to BS ISO 12872:2010
    • BS EN ISO 12873:2014 Olive oils and olive-pomace oils. Determination of wax content by capillary gas chromatography
      Implementation of European Standard EN ISO 12873 by amendment to BS ISO 12873:2010
    • BS EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems. Offshore pipelines
      Implementation of European Standard EN ISO 15589-2 by amendment to BS ISO 15589-2:2012
    • BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
      Implementation of European Standard EN ISO 15970 by amendment to BS ISO 15970:2008
    • BS EN ISO 15971:2014 Natural gas. Measurement of properties. Calorific value and Wobbe index
      Implementation of European Standard EN ISO 15971 by amendment to BS ISO 15971:2008
    • BS EN ISO 16635-1:2014 Dentistry. Dental rubber dam technique. Hole punch
      Implementation of European Standard EN ISO 16635-1 by amendment to BS ISO 16635-1:2013
    • BS EN ISO 18772:2014 Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
      Implementation of European Standard EN ISO 18772 by amendment to BS ISO 18772:2008
    • BS EN ISO 19125-1:2006 Geographic information. Simple feature access. Common architecture
      Implementation of European Standard EN ISO 19125-1 by amendment to BS ISO 19125-1:2004
    • BS EN ISO 20753:2014 Plastics. Test specimens
      Implementation of European Standard EN ISO 20753 by amendment to BS ISO 20753:2008
    • BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
      Implementation of European Standard EN ISO 22068 by amendment to BS ISO 22068:2012
    • BS EN ISO 29822:2014 Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols
      Implementation of European Standard EN ISO 29822 by amendment to BS ISO 29822:2009
    • BS EN ISO 29841:2014 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a’ (pheophytins a, a’ and pyropheophytins)
      Implementation of European Standard EN ISO 28941 by amendment to BS ISO 29841:2009

    BS implementations

    BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard. 

    • BS ISO 230-2:2014 Test code for machine tools. Determination of accuracy and repeatability of positioning of numerically controlled axes
      Supersedes BS ISO 230-2:2006
    • BS ISO 500-1:2014 Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4. General specifications, safety requirements, dimensions for master shield and clearance zone
      Supersedes BS ISO 500-1:2004
    • BS ISO 500-3:2014 Agricultural tractors. Rear-mounted power take-off types 1, 2, 3 and 4. Main PTO dimensions and spline dimensions, location of PTO
      Supersedes BS ISO 500-3:2004
    • BS ISO 817:2014 Refrigerants. Designation and safety classification
      Supersedes BS ISO 817:2005
    • BS ISO 1986-1:2014 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Testing of the accuracy. Machines with table length of up to 1 600 mm
      Supersedes BS ISO 1986-1:2001
    • BS ISO 2000:2014 Rubber, raw natural. Guidelines for the specification of technically specified rubber (TSR)
      Supersedes BS ISO 2000:2003
    • BS ISO 3468:2014 Passenger cars. Windscreen defrosting and demisting systems. Test method
    • BS ISO 3529-3:2014 Vacuum technology. Vocabulary. Total and Partial pressure vacuum gauges
    • BS ISO 3534-4:2014 Statistics. Vocabulary and symbols. Survey sampling
    • BS ISO 4250-1:2014 Earth-mover tyres and rims. Tyre designation and dimensions
      Supersedes BS ISO 4250-1:2006
    • BS ISO 4250-2:2014 Earth-mover tyres and rims. Loads and inflation pressures
      Supersedes BS ISO 4250-2:2006
    • BS ISO 5145:2014 Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning
      Supersedes BS ISO 5145:2004+A2:2008
    • BS ISO 5149-1:2014 Refrigerating systems and heat pumps. Safety and environmental requirements. Definitions, classification and selection criteria
    • BS ISO 5149-2:2014 Refrigerating systems and heat pumps. Safety and environmental requirements. Design, construction, testing, marking and documentation
    • BS ISO 5149-3:2014 Refrigerating systems and heat pumps. Safety and environmental requirements. Installation site
    • BS ISO 6550-4:2014 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs
      Supersedes BS ISO 6550-4:2009
    • BS ISO 6707-1:2014 Buildings and civil engineering works. Vocabulary. General terms
      Supersedes BS 6100-1:2004
    • BS ISO 6707-2:2014 Building and civil engineering works. Vocabulary. Contract terms
      Supersedes BS 6100-10:2007
    • BS ISO 6932:2014 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
    • BS ISO 7240-1:2014 Fire detection and alarm systems. General and definitions
    • BS ISO 8513:2014 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the apparent initial longitudinal tensile strength
    • BS ISO/IEC/IEEE 8802-1AB:2014 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Station and Media Access Control Connectivity Discovery
    • BS ISO/IEC/IEEE 8802-1AR:2014 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Secure device identity
    • BS ISO/IEC/IEEE 8802-1AS:2014 Information technology. Telecommunications and information exchange between systems. Local and metropolitan area networks. Timing and synchronization for time-sensitive applications in bridged local area networks
    • BS ISO 8820-9:2014 Road vehicles. Fuse-links. Fuse-links with shortened tabs (Type K)
    • BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
      Supersedes BS ISO 9276-2:2001
    • BS ISO 10327:2014 Air cargo. Main deck containers. Design and testing
      Supersedes BS M 84:1995
    • BS ISO 10788:2014 Space systems. Lunar simulants
    • BS ISO 10844:2014 Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres
      Supersedes BS ISO 10844:2011
    • BS ISO 11077:2014 Aircraft ground equipment. De-icers. Functional requirements
      Supersedes BS M 77:1994
    • BS ISO 11270:2014 Intelligent transport systems. Lane keeping assistance systems (LKAS). Performance requirements and test procedures
    • BS ISO 11620:2014 Information and documentation. Library performance indicators
      Supersedes BS ISO 11620:2008
    • BS ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
      Supersedes BS ISO 11663:2009
    • BS ISO 11676:2014 Textile machinery and accessories. Pattern disks and pattern chains for warp knitting machines. Vocabulary and symbols
    • BS ISO 11783-3:2014 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Data link layer
      Supersedes BS ISO 11783-3:2007
    • BS ISO 11992-2:2014 Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Application layer for brakes and running gear
    • BS ISO 11992-4:2014 Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Diagnostic communication
      Supersedes BS ISO 11992-4:2005
    • BS ISO 12044:2014 Rolling bearings. Single-row angular contact ball bearings. Chamfer dimensions for outer ring non-thrust side
      Supersedes BS ISO 12044:1995
    • BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
    • BS ISO 12219-5:2014 Interior air of road vehicles. Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials. Static chamber method
    • BS ISO 12405-3:2014 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. Safety performance requirements
    • BS ISO 12653-3:2014 Electronic imaging. Test target for scanning of office documents. Test target for use in lower resolution applications
    • BS ISO 13106:2014 Plastics. Blow-moulded polypropylene containers for packaging of liquid foodstuffs
    • BS ISO 13165-2:2014 Water quality. Radium-226. Test method using emanometry
    • BS ISO 13179-1:2014 Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants. General requirements
    • BS ISO 13322-1:2014 Particle size analysis. Image analysis methods. Static image analysis methods
      Supersedes BS ISO 13322-1:2005
    • BS ISO 13612-1:2014 Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems. Design and dimensioning
    • BS ISO 13612-2:2014 Heating and cooling systems in buildings. Method for calculation of the system performance and system design for heat pump systems. Energy calculation
    • BS ISO 13820:2014 Paper, board and corrugated fibreboard. Description and calibration of compression testing equipment
      Supersedes BS ISO 13820:1996
    • BS ISO 13959:2014 Water for haemodialysis and related therapies
      Supersedes BS ISO 13959:2009
    • BS ISO 14104:2014 Gears. Surface temper etch inspection after grinding, chemical method
      Supersedes BS 7862:1996
    • BS ISO 14785:2014 Tourist information offices. Tourist information and reception services. Requirements
    • BS ISO 14955-1:2014 Machine tools. Environmental evaluation of machine tools. Design methodology for energy efficient machine tools
    • BS ISO 15000-5:2014 Electronic Business Extensible Markup Language (ebXML). Core Components Specification (CCS)
    • BS ISO/IEC 15026-1:2013 Systems and software engineering. Systems and software assurance. Concepts and vocabulary
      Supersedes PD ISO/IEC TR 15026-1:2010
    • BS ISO 15114:2014 Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach
    • BS ISO 15118-2:2014 Road vehicles. Vehicle-to-Grid Communication Interface. Network and application protocol requirements
    • BS ISO 15510:2014 Stainless steels. Chemical composition
      Supersedes BS ISO 15510:2010
    • BS ISO 15625:2014 Silk. Electronic test method for defects and evenness of raw silk
    • BS ISO 15985:2014 Plastics. Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions. Method by analysis of released biogas
      Supersedes BS ISO 15985:2004
    • BS ISO 16000-29:2014 Indoor air. Test methods for VOC detectors
    • BS ISO 16000-31:2014 Indoor air. Measurement of flame retardants and plasticizers based on organophosphorus compounds. Phosphoric acid ester
    • BS ISO 16063-16:2014 Methods for the calibration of vibration and shock transducers. Calibration by Earth’s gravitation
      Supersedes BS 6955-5:1994
    • BS ISO 16065-1:2014 Pulps. Determination of fibre length by automated optical analysis. Polarized light method
      Supersedes BS ISO 16065-1:2001
    • BS ISO 16126:2014 Space systems. Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal
    • BS ISO 16143-1:2014 Stainless steels for general purposes. Corrosion resistant flat products
    • BS ISO 16143-2:2014 Stainless steels for general purposes. Corrosion resistant semi-finished products, bars, rods and sections
    • BS ISO 16143-3:2014 Stainless steels for general purposes. Wire
    • BS ISO 16345:2014 Water-cooling towers. Testing and rating of thermal performance
    • BS ISO 16365-1:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Designation system and basis for specifications
    • BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Preparation of test specimens and determination of properties
    • BS ISO 16365-3:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Distinction between ether and ester polyurethanes by determination of the ester group content
    • BS ISO 16457:2014 Space systems. Space environment (natural and artificial). The Earth’s ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
      Supersedes DD ISO/TS 16457:2009
    • BS ISO 16928:2014 Essential oil of ginger [Zingiber officinale Roscoe]
    • BS ISO 16462:2014 Cubic boron nitride inserts, tipped or solid. Dimensions, types
      Supersedes BS ISO 16462:2004
    • BS ISO 16463:2014 Polycristalline diamond inserts, tipped. Dimensions, types
      Supersedes BS ISO 16463:2004
    • BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. General test methods
    • BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of electrical characteristics for use in electronic assemblies
    • BS ISO 16525-3:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of heat transfer properties
    • BS ISO 16525-4:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies
    • BS ISO 16525-5:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of shear fatigue
    • BS ISO 16525-6:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of pendulum-type shear impact
    • BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Environmental test methods
    • BS ISO 16525-8:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Electrochemical-migration test methods
    • BS ISO 16525-9:2014 Adhesives. Test methods for isotropic electrically conductive adhesives. Determination of high speed signal-transmission characteristics
    • BS ISO 16571:2014 Systems for evacuation of plume generated by medical devices
    • BS ISO 16972:2010 Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement
    • BS ISO 17094:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antibacterial activity of semiconducting photocatalytic materials under indoor lighting environment
    • BS ISO 17140:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude
    • BS ISO 17161:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Determination of the degree of misalignment in uniaxial mechanical tests
    • BS ISO 17185-1:2014 Intelligent transport systems. Public transport user information. Standards framework for public information systems
    • BS ISO 17215-1:2014 Road vehicles. Video communication interface for cameras (VCIC). General information and use case definition
    • BS ISO 17217-1:2014 Traditional Chinese medicine. Ginseng seeds and seedlings. Panax ginseng C.A. Meyer
    • BS ISO 17218:2014 Sterile acupuncture needles for single use
    • BS ISO 17221:2014 Plastics. Determination of image clarity (degree of sharpness of reflected or transmitted image)
    • BS ISO 17340:2014 Metallic materials. Ductility testing. High speed compression test for porous and cellular metals
    • BS ISO 17411:2014 Optics and photonics. Optical materials and components. Test method for homogeneity of optical glasses by laser interferometry
    • BS ISO 17440:2014 Cranes. General design. Limit states and proof of competence of forged steel hooks
    • BS ISO 17484-1:2014 Plastics piping systems. Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Specifications for systems
      Supersedes BS ISO 17484-1:2006
    • BS ISO 17860:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of drying loss of ceramic granules
    • BS ISO 17861:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral transmittance of fine ceramics thin films under humid condition
    • BS ISO 18061:2014 Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics). Determination of antiviral activity of semiconducting photocatalytic materials. Test method using bacteriophage Qbeta
    • BS ISO 18431-3:2014 Mechanical vibration and shock. Signal processing. Methods of time-frequency analysis
    • BS ISO 18436-7:2014 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Thermography
      Supersedes BS ISO 18436-7:2008
    • BS ISO 18944:2014 Imaging materials. Reflection colour photographic prints. Test print construction and measurement
      Supersedes BS ISO 18944:2012
    • BS ISO/IEC 19099:2014 Information technology. Virtualization Management Specification
    • BS ISO 19292:2014 Ships and marine technology. Lifesaving and fire protection. Point-type resettable flame detectors for ships
    • BS ISO 20562:2014 Tyre valves. ISO core chambers No. 1, No. 2, No. 3 and No. 4
    • BS ISO 21010:2014 Cryogenic vessels. Gas/materials compatibility
      Supersedes BS ISO 21010:2004
    • BS ISO 21101:2014 Adventure tourism. Safety management systems. Requirements
    • BS ISO 21103:2014 Adventure tourism. Information for participants
    • BS ISO 21217:2014 Intelligent transport systems. Communications access for land mobiles (CALM). Architecture
      Supersedes BS ISO 21217:2010
    • BS ISO 22007-6:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
    • BS ISO 22493:2014 Microbeam analysis. Scanning electron microscopy. Vocabulary
      Supersedes BS ISO 22493:2008
    • BS ISO/IEC 23009-1:2014 Information technology. Dynamic adaptive streaming over HTTP (DASH). Media presentation description and segment formats
    • BS ISO 23462:2014 Space systems. Guidelines to define the management framework for a space project
      Supersedes PD ISO/TR 23462:2007
    • BS ISO 23500:2014 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
      Supersedes BS ISO 23500:2011
    • BS ISO 23551-5:2014 Safety and control devices for gas burners and gas-burning appliances. Manual gas valves
    • BS ISO 24035:2014 Belt drives. V-belts and the corresponding pulleys for agricultural machineries. Dimensions
    • BS ISO 24615-1:2014 Language resource management. Syntactic annotation framework (SynAF). Syntactic model
      Supersedes BS ISO 24615:2010
    • BS ISO 25761:2014 Plastics. Polyols for use in the production of polyurethanes. Determination of basicity (total amine value), expressed as percent nitrogen
      Supersedes BS ISO 25761:2008
    • BS ISO 26722:2014 Water treatment equipment for haemodialysis applications and related therapies
      Supersedes BS ISO 26722:2009
    • BS ISO/IEC 27036-1:2014 Information technology. Security techniques. Information security for supplier relationships. Overview and concepts
    • BS ISO/IEC 29109-5:2014 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Face image data
      Supersedes BS ISO/IEC 29109-5:2012
    • BS ISO 29991:2014 Language learning services outside formal education. Requirements
    • BS ISO 37120:2014 Sustainable development of communities. Indicators for city services and quality of life
    • BS ISO 55000 Series Asset management. Overview, principles and terminology
      Supersedes BS ISO 55000/01/02 Asset Management Pack
    • BS IEC 62843:2013 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment

    Publicly Available Specifications

    Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full standard has yet to be published.

    • PAS 44:2014 Official identification for cattle. Specification
      Supersedes PAS 44:2009
    • PAS 66:2014 Official identification eartags for sheep and goats. Specification
      Supersedes PAS 66:2009
    • PAS 754:2014 Software Trustworthiness. Governance and management. Specification
    • PAS 1008:2014 Specification for the performance and testing of a single-use flexitank
    • PAS 2060:2014 Specification for the demonstration of carbon neutrality
      Supersedes PAS 2060:2010

    Corrigenda to British standards and updated British standards

    Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended standards and corrigenda to British standards were made available last month.

    • BS 476-20:1987 Fire tests on building materials and structures. Method for determination of the fire resistance of elements of construction (general principles)
      CORRIGENDUM 1
    • BS 476-21:1987 Fire tests on building materials and structures. Methods for determination of the fire resistance of loadbearing elements of construction
      CORRIGENDUM 1
    • BS 476-22:1987 Fire tests on building materials and structures. Method for determination of the fire resistance of non-loadbearing elements of construction
      CORRIGENDUM 1
    • BS 476-24:1987 (ISO 6944:1985) Fire tests on building materials and structures. Method for determination of the fire resistance of ventilation ducts
      CORRIGENDUM 1
    • BS 3643-2:2007 ISO metric screw threads. Specification for selected limits of size
      CORRIGENDUM 1
    • BS 5228-2:2009+A1:2014 Code of practice for noise and vibration control on construction and open sites. Vibration
      AMENDMENT 1
    • BS 7928:2013 Specification for head protectors for cricketers
      CORRIGENDUM 1
    • BS 8417:2011+A1:2014 Preservation of wood. Code of practice
      AMENDMENT 1
    • BS EN 31:2011+A1:2014 Wash basins. Connecting dimensions
      AMENDMENT 1
    • BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties
      AMENDMENT 3
    • BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
      AMENDMENT 1
    • BS EN 206:2013 Concrete. Specification, performance, production and conformity
      CORRIGENDUM 1
    • BS EN 474-1:2006+A4:2013 Earth-moving machinery. Safety. General requirements
      CORRIGENDUM 1
    • BS EN 1092-1:2007+A1:2013 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories PN designated. Steel flanges
      CORRIGENDUM 1
    • BS EN 1364-4:2014 Fire resistance tests for non-loadbearing elements. Curtain walling. Part configuration
      CORRIGENDUM 1
    • BS EN 1994-1-2:2005+A1:2014 Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design
      AMENDMENT 1
    • BS EN 1995-1-1:2004+A2:2014 Eurocode 5: Design of timber structures. General. Common rules and rules for buildings
      AMENDMENT 2
    • BS EN 2267-009:2013 Aerospace series. Cables, electrical, for general purpose. Operating temperatures between - 55ºC and 260ºC. DRA family, single and multicore assembly. Product standard
      CORRIGENDUM 1
    • BS EN ISO 3691-6:2013 Industrial trucks. Safety requirements and verification. Burden and personnel carriers
      CORRIGENDUM 1
    • BS EN ISO 4833-2:2013 Microbiology of the food chain. Horizontal method for the enumeration of microorganisms. Colony count at 30 degrees C by the surface plating technique
      CORRIGENDUM 1
    • BS EN ISO 5361:2012 Anaesthetic and respiratory equipment. Tracheal tubes and connectors
      CORRIGENDUM 1
    • BS EN ISO 6883:2014 Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air)
      CORRIGENDUM 1
    • BS EN ISO 8407:2014 Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
      CORRIGENDUM 1
    • BS EN ISO 8586:2014 Sensory analysis. General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
      CORRIGENDUM 1
    • BS EN 10152:2009 Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions
      CORRIGENDUM 1
    • BS EN ISO 10555-1:2013 Intravascular catheters. Sterile and single-use catheters. General requirements
      CORRIGENDUM 1
    • BS EN ISO 11272:2014 Soil quality. Determination of dry bulk density
      CORRIGENDUM 1
    • BS EN ISO 11274:2014 Soil quality. Determination of the water retention characteristic. Laboratory methods
      CORRIGENDUM 1
    • BS EN ISO 11275:2014 Soil quality. Determination of unsaturated hydraulic conductivity and water-retention characteristic. Wind’s evaporation method
      CORRIGENDUM 1
    • BS EN ISO 11276:2014 Soil quality. Determination of pore water pressure. Tensiometer method
      CORRIGENDUM 1
    • BS EN ISO 11357-2:2014 Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature and glass transition step height
      CORRIGENDUM 1
    • BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
      CORRIGENDUM 1
    • BS EN 12183:2014 Manual wheelchairs. Requirements and test methods
      CORRIGENDUM 1
    • BS EN ISO 12671:2014 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
      CORRIGENDUM 1
    • BS EN ISO 12677:2011 Chemical analysis of refractory products by Xray fluorescence (XRF). Fused cast-bead method
      CORRIGENDUM 1
    • BS EN 12828:2012+A1:2014 Heating systems in buildings. Design for water based heating systems
      AMENDMENT 1
    • BS EN ISO 12872:2014 Olive oils and olive-pomace oils. Determination of the 2-glyceryl monopalmitate content
      CORRIGENDUM 1
    • BS EN ISO 12873:2014 Olive oils and olive-pomace oils. Determination of wax content by capillary gas chromatography
      CORRIGENDUM 1
    • BS EN 13044-1:2011 Intermodal Loading Units. Marking. Markings for identification
      CORRIGENDUM 1
    • BS EN 13197:2011+A1:2014 Road marking materials. Wear simulator. Turntable
      AMENDMENT 1
    • BS EN ISO 13274:2013 Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
      CORRIGENDUM 2
    • BS EN 13481-2:2012 Railway applications. Track. Performance requirements for fastening systems. Fastening systems for concrete sleepers
      CORRIGENDUM 1
    • BS EN 13779:2007 Ventilation for non-residential buildings. Performance requirements for ventilation and room-conditioning systems
      CORRIGENDUM 1
    • BS EN 13964:2014 Suspended ceilings. Requirements and test methods
      CORRIGENDUM 1
    • BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
      CORRIGENDUM 1
    • BS EN 14214:2012+A1:2014 Liquid petroleum products. Fatty acid methyl esters (FAME) for use in diesel engines and heating applications. Requirements and test methods
      AMENDMENT 1
    • BS EN 15154-1:2006 Emergency safety showers. Plumbed-in body showers for laboratories
      CORRIGENDUM 1
    • BS EN ISO 15589-2:2014 Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems. Offshore pipelines
      CORRIGENDUM 1
    • BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
      CORRIGENDUM 1
    • BS EN ISO 15971:2014 Natural gas. Measurement of properties. Calorific value and Wobbe index
      CORRIGENDUM 1
    • BS EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads. Single-track two-wheel motor vehicles. Safety requirements and test methods
      CORRIGENDUM 1
    • BS EN 16120:2012+A1:2014 Child use and care articles. Chair mounted seat
      AMENDMENT 1
    • BS EN ISO 16283-1:2014 Acoustics. Field measurement of sound insulation in buildings and of building elements. Airborne sound insulation
      CORRIGENDUM 1
    • BS EN ISO 16665:2013 Water quality. Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
      CORRIGENDUM 1
    • BS EN ISO 16635-1:2014 Dentistry. Dental rubber dam technique. Hole punch
      CORRIGENDUM 1
    • BS EN ISO 17249:2013 Safety footwear with resistance to chain saw cutting
      CORRIGENDUM 1
    • BS EN ISO 18772:2014 Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and soil materials
      CORRIGENDUM 1
    • BS EN ISO 19125-1:2006 Geographic information. Simple feature access. Common architecture
      CORRIGENDUM 1
    • BS EN ISO 20753:2014 Plastics. Test specimens
      CORRIGENDUM 1
    • BS EN ISO 21536:2009+A1:2014 Non-active surgical implants. Joint replacement implants. Specific requirements for knee-joint replacement implants
      AMENDMENT 1
    • BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
      CORRIGENDUM 1
    • BS EN ISO 29822:2014 Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols
      CORRIGENDUM 1
    • BS EN ISO 29841:2014 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a’ (pheophytins a, a’ and pyropheophytins)
      CORRIGENDUM 1
    • BS EN 50128:2011 Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems
      CORRIGENDUM 1
    • BS EN 50131-2-2:2008 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Passive infrared detectors
      CORRIGENDUM 1
    • BS EN 50131-2-3:2008 Alarm systems. Intrusion and hold-up systems. Requirements for microwave detectors
      CORRIGENDUM 1
    • BS EN 50131-2-4:2008 Alarm systems. Intrusion and hold-up systems. Requirements for combined passive infrared and microwave detectors
      CORRIGENDUM 1
    • BS EN 50131-2-5:2008 Alarm systems. Intrusion and hold-up systems. Requirements for combined passive infrared and ultrasonic detectors
      CORRIGENDUM 1
    • BS EN 50131-2-6:2008 Alarm systems. Intrusion and hold-up systems. Opening contacts (magnetic)
      CORRIGENDUM 1
    • PD CLC/TS 50131-2-8:2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors
      CORRIGENDUM 1
    • BS EN 50492:2008+A1:2014 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations
      AMENDMENT 1
    • BS EN 55020:2007+A11:2011 Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement
      CORRIGENDUM 4
    • BS EN 60079-0:2012+A11:2013 Explosive atmospheres. Equipment. General requirements
      AMENDMENT 11
    • BS EN 60335-1:2012 Household and similar electrical appliances. Safety. General requirements
      CORRIGENDUM 2
    • BS EN 60335-2-9:2003+A13:2010 Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances
      CORRIGENDUM 4
    • BS EN 60335-2-21:2003+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for storage water heaters
      CORRIGENDUM 3
    • BS EN 60335-2-76:2005+A12:2010 Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
      CORRIGENDUM 3
    • BS EN 60601-1-3:2008+A1:2013 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: Radiation protection in diagnostic X-ray equipment
      CORRIGENDUM 2
    • BS EN 60684-3-216:2005+A2:2014 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
      AMENDMENT 2
    • BS EN 60684-3-280:2010+A1:2014 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, anti-tracking
      AMENDMENT 1
    • BS EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
      CORRIGENDUM 1
    • BS EN 60838-2-1:1996 Miscellaneous lampholders. Particular requirements. Lampholders S14
      CORRIGENDUM 3
    • BS EN 60893-3-4:2004+A1:2012 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins
      CORRIGENDUM 1
    • BS EN 60947-3:2009+A1:2012 Low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
      CORRIGENDUM 2
    • BS EN 61034-1:2005+A1:2014 Measurement of smoke density of cables burning under defined conditions. Test apparatus
      AMENDMENT 1
    • BS EN 61158-4-7:2008 Industrial communication networks. Fieldbus specifications. Data-link layer protocol specification. Type 7 elements
      CORRIGENDUM 1
    • BS EN 61212-1:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
      CORRIGENDUM 1
    • BS EN 61347-2-1:2001+A2:2014 Lamp controlgear. Particular requirements for starting devices (other than glow starters)
      AMENDMENT 2
    • BS EN 61535:2009+A1:2013 Installation couplers intended for permanent connection in fixed installations
      CORRIGENDUM 1
    • BS EN 61883-8:2009+A1:2014 Consumer audio/video equipment. Digital interface. Transmission of ITU-R BT.601 style digital video data
      AMENDMENT 1
    • BS EN 62230:2007+A1:2014 Electric cables. Spark-test method
      AMENDMENT 1
    • BS EN 140401-801:2007+A1:2013 Detail specification: Fixed low power film SMD resistors. Rectangular. Stability classes 0,1; 0,25; 0,5; 1
      AMENDMENT 1
    • BS EN 140401-802:2007+A2:2013 Detail specification: Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2
      AMENDMENT 2
    • BS EN 140401-804:2011+A1:2013 Detail Specification: Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25
      AMENDMENT 1
    • BS ISO 4427-2:2007+A1:2014 Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Pipes
      AMENDMENT 1
    • BS ISO 7295:1988+A1:2014 Tyre valves for aircraft. Interchangeability dimensions
      AMENDMENT 1
    • BS ISO/IEC 7816-12:2005 Identification cards. Integrated circuit cards. Cards with contacts. USB electrical interface and operating procedures
      CORRIGENDUM 1
    • BS ISO/IEC 10373-6:2011+A4:2012 Identification cards. Test methods. Proximity cards
      AMENDMENT 4
    • BS ISO/IEC 14443-1:2008+A1:2012 Identification cards. Contactless integrated circuit cards. Proximity cards. Physical characteristics
      CORRIGENDUM 1
    • BS ISO/IEC 14443-3:2011+A3:2014 Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision
      AMENDMENT 3
    • BS ISO/IEC 14443-4:2008+A4:2014 Identification cards. Contactless integrated circuit cards. Proximity cards. Transmission protocol
      AMENDMENT 4
    • BS ISO/IEC 15946-1:2008 Information technology. Security techniques. Cryptographic techniques based on elliptic curves. General
      CORRIGENDUM 2
    • BS ISO/IEC 19794-8:2011+A1:2014 Information technology. Biometric data interchange formats. Finger pattern skeletal data
      AMENDMENT 1
    • BS ISO/IEC 24727-2:2008+A1:2014 Identification cards. Integrated circuit card programming interfaces. Generic card interface
      AMENDMENT 1
    • BS ISO/IEC 24727-4:2008+A1:2014 Identification cards. Integrated circuit card programming interfaces. Application programming interface (API) administration
      AMENDMENT 1
    • PD ISO/IEC TR 29106:2007+A1:2012 Information technology. Generic cabling. Introduction to the MICE environmental classification
      AMENDMENT 1
    • BS ISO/IEC 29150:2011 Information technology. Security techniques. Signcryption
      CORRIGENDUM 1
    • BS IEC 62443-3-3:2013 Industrial communication networks. Network and system security. System security requirements and security levels
      CORRIGENDUM 1

    British standards withdrawn

    • BS 1902-9.1:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
      Superseded by BS EN ISO 12677:2011
    • BS 2464-2:1969 Specification for hose couplings for petrol, oil and lubricants. High pressure couplings
      Superseded by PD CEN/TS 16650:2014
    • BS 5979:2007 Remote centres receiving signals from fire and security systems. Code of practice
      Superseded by BS 8591:2014
    • BS 6100-1:2004 (BS ISO 6707-1:2004) Building and civil engineering. Vocabulary. General terms
      Superseded by BS ISO 6707-1:2014
    • BS 6100-10:2007 Building and civil engineering. Vocabulary. Contract terms
      Superseded by BS ISO 6707-2:2014
    • BS 6299:1982 (CISPR 17:1981) Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
      Superseded by BS EN 55017:2011
    • BS 6955-5:1994 (ISO 5347-5:1993) Calibration of vibration and shock pick-ups. Method for calibration by earth’s gravitation
      Superseded by BS ISO 16063-16:2014
    • BS 7862:1996 (ISO 14104:1995) Gears. Surface temper etch inspection after grinding
      Superseded by BS ISO 14104:2014
    • BS 7928:1998 Specification for head protectors for cricketers
      Superseded by BS 7928:2013
    • BS EN 36:1999 Wall-hung bidets with over-rim supply. Connecting dimensions
      Superseded by BS EN 35:2014
    • BS EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
      Superseded by BS EN 16191:2014
    • BS EN 1782:1998+A1:2009 Tracheal tubes and connectors
      Superseded by BS EN ISO 5361:2012
    • BS EN 1866:2005 Mobile fire extinguishers
      Superseded by BS EN 1866-1:2007, BS EN 1866-2:2014 and BS EN 1866-3:2013
    • BS EN 12336:2005+A1:2008 Tunnelling machines. Shield machines, thrust boring machines, auger boring machines, lining erection equipment. Safety requirements
      Superseded by BS EN 16191:2014
    • BS EN 14114:2002 Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
      Superseded by BS EN ISO 15758:2014
    • BS EN 14153-1:2003 Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 1. Supervised Diver
      Superseded by BS EN ISO 24801-1:2014
    • BS EN 14153-2:2003 Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 2. Autonomous Diver
      Superseded by BS EN ISO 24801-2:2014
    • BS EN 14153-3:2003 Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 3. Dive Leader
      Superseded by BS EN ISO 24801-3:2014
    • BS EN 14413-1:2004 Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 1
      Superseded by BS EN ISO 24802-1:2014
    • BS EN 14413-2:2004 Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 2
      Superseded by BS EN ISO 24802-2:2014
    • BS EN 14665:2004 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
      Superseded by BS EN ISO 12671:2014
    • BS EN 14907:2005 Ambient air quality. Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
      Superseded by BS EN 12341:2014
    • DD CEN/TS 15480-3:2010 Identification card systems. European citizen card. European citizen card interoperability using an application interface
      Superseded by PD CEN/TS 15480-3:2014
    • DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC). Characterisation of WPC products
      Superseded by BS EN 15534-4:2014 and BS EN 15534-5:2014
    • BS EN ISO 19115:2005 Geographic information. Metadata
      Superseded by BS EN ISO 19115-1:2014
    • BS EN 20140-2:1993 (BS 2750-2:1993, ISO 140-2:1991) Determination, verification and application of precision data
      Superseded by BS EN ISO 12999-1:2014
    • BS EN 50164-5:2009 Lightning protection components (LPC). Requirements for earth electrode inspection housings and earth electrode seals
      Superseded by BS EN 62561-5:2011
    • BS EN 50164-6:2009 Lightning protection components (LPC). Requirements for lightning strike counters
      Superseded by BS EN 62561-6:2011
    • BS EN 55016-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainty in EMC measurements
      Superseded by BS EN 55016-4-2:2011
    • BS EN 60034-16-1:1996 Rotating electrical machines. Excitation systems for synchronous machines. Definitions
      Superseded by BS EN 60034-16-1:2011
    • BS EN 60265-1:1998 Specification for high-voltage switches. Switches for rated voltages above 1 kV and less than 52 kV
      Superseded by BS EN 62271-103:2011
    • BS EN 60335-2-40:2003+A2:2009 Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
      Superseded by BS EN 60335-2-40:2003+A13:2012
    • BS EN 60684-3-271:2004 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
      Superseded by BS EN 60684-3-271:2011
    • BS EN 60893-3-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
      Superseded by BS EN 60893-3-2:2004+A1:2011
    • BS EN 60925:1991 Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
      Superseded by BS EN 60929:2011
    • BS EN 60929:2006 A.C. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
      Superseded by BS EN 60929:2011
    • BS EN 60947-4-2:2000 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters
      Superseded by BS EN 60947-4-2:2012
    • BS EN 61000-3-12:2005 Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16A and ≤ 75A per phase
      Superseded by BS EN 61000-3-12:2011
    • BS EN 61337-1-1:1998 Filters using waveguide type dielectric resonators. General information, standard values and test conditions. General information and standard values
      Superseded by BS EN 171000:2001
    • BS EN 61347-2-3:2001+A2:2006 Lamp controlgear. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
      Superseded by BS EN 61347-2-3:2011
    • BS EN 61347-2-4:2001 Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for general lighting
      Superseded by BS EN 61347-2-3:2011
    • BS EN 61347-2-5:2001 Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for public transport lighting
      Superseded by BS EN 61347-2-3:2011
    • BS EN 61347-2-6:2001 Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for aircraft lighting
      Superseded by BS EN 61347-2-3:2011
    • BS EN 61534-1:2003 Powertrack systems. General requirements
      Superseded by BS EN 61534-1:2011
    • BS EN 61850-9-1:2003 Communication networks and systems in substations. Specific communication service mapping (SCSM). Sampled values over serial unidirectional multidrop point to point link
      This standard is withdrawn as it is no longer relevant
    • BS EN 61858:2008 Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
      Superseded by BS EN 61858-1:2014
    • BS EN 61951-2:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-metal hydride
      Superseded by BS EN 61951-2:2011
    • BS EN 61960:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
      Superseded by BS EN 61960:2011
    • BS EN 61970-402:2008 Energy management system application program interface (EMS-API). Common services
      This standard is withdrawn as it is no longer relevant
    • BS EN 61970-403:2008 Energy management system application program interface (EMS-API). Generic data access
      This standard is withdrawn as it is no longer relevant
    • BS EN 61970-404:2007 Energy management system application program interface (EMS-API). High speed data access (HSDA)
      This standard is withdrawn as it is no longer relevant
    • BS EN 61970-405:2007 Energy management system application program interface (EMS-API). Generic eventing and subscription (GES)
      This standard is withdrawn as it is no longer relevant
    • BS EN 61970-407:2007 Energy management system application program interface (EMS-API). Time series data access (TSDA)
      This standard is withdrawn as it is no longer relevant
    • BS EN 62271-1:2008 High-voltage switchgear and controlgear. Common specifications
      Superseded by BS EN 62271-1:2008+A1:2011
    • DD ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
      Superseded by PD CEN/TR 13801:2014
    • BS ISO 8009-1:1997 Reusable rubber contraceptive diaphragms. Classification, sampling and requirements
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-2:1985 Reusable rubber contraceptive diaphragms. Determination of size
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-3:1985 Reusable rubber contraceptive diaphragms. Determination of dome thickness
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-4:1996 Reusable rubber contraceptive diaphragms. Freedom from visible defects
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-5:1996 Reusable rubber contraceptive diaphragms. Determination of tensile properties
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-6:1985 Reusable rubber contraceptive diaphragms. Determination of deterioration after accelerated ageing
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-7:1985 Reusable rubber contraceptive diaphragms. Determination of compression resistance of coil spring and flat spring diaphragms
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-8:1985 Reusable rubber contraceptive diaphragms. Determination of twisting during compression of coil spring and flat spring diaphragms
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-9:1985 Reusable rubber contraceptive diaphragms. Packaging and labelling
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • BS ISO 8009-10:1985 Reusable rubber contraceptive diaphragms. Recommendations for storage
      This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
    • DD CEN ISO/TS 11133-1:2009 Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. General guidelines on quality assurance for the preparation of culture media in the laboratory
      Superseded by BS EN ISO 11133:2014
    • DD CEN ISO/TS 11133-2:2003+A1:2011 Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. Practical guidelines on performance testing of culture media
      Superseded by BS EN ISO 11133:2014
    • BS ISO 11564:1998 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method
      This standard is withdrawn as the method described is not used in the UK and the relevant method included in BS EN 14792 is used instead. Additionally the results and consistency of the BS ISO 11564 method has been called into question by the UK methods
    • DD ISO/TS 16457:2009 Space systems. Space environment (natural and artificial). The Earth’s ionosphere model. International reference ionosphere (IRI) model and extensions to the plasmasphere
      Superseded by BS ISO 16457:2014
    • PD ISO/TR 23462:2007 Space systems. Guidelines to define the management framework for a space project
      Superseded by BS ISO 23462:2014
    • BS ISO 24615:2010 Language resource management. Syntactic annotation framework (SynAF)
      Superseded by BS ISO 24615-1:2014
    • BS ISO 25119-1:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. General principles for design and development
      Superseded by BS EN 16590-1:2014
    • BS ISO 25119-2:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Concept phase
      Superseded by BS EN 16590-2:2014
    • BS ISO 25119-3:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Series development, hardware and software
      Superseded by BS EN 16590-3:2014
    • BS ISO 25119-4:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Production, operation, modification and supporting processes
      Superseded by BS EN 16590-4:2014
    • DD IEC/TS 60695-9-2:2005 Fire hazard testing. Surface spread of flame. Summary and relevance of test methods
      Superseded by BS EN 60695-9-2:2014
    • PD CR 14473:2002 Transportable gas cylinders. Porous masses for acetylene cylinders
      Superseded by PD CEN/TR 14473:2014
    • PD ISO/IEC TR 15026-1:2010 Systems and software engineering. Systems and software assurance. Concepts and vocabulary
      Superseded by BS ISO/IEC 15026-1:2013
    • BS M 77:1994 (ISO 11077:1993) Self-propelled de-icing/anti-icing vehicles. Functional requirements
      Superseded by BS ISO 11077:2014
    • BS M 84:1995 (ISO 10327:1995) Air cargo equipment. Certified aircraft container for air cargo. Specification and testing
      Superseded by BS ISO 10327:2014
    • PAS 200:2011 Crisis management. Guidance and good practice
      BS 11200:2014 is based on PAS 200:2011
    d
  • BS EN ISO 21536:2009+A1:2014 Non-active surgical implants. Joint replacement implants. Specific requirements for knee-joint replacement implants
    AMENDMENT 1
  • BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
    CORRIGENDUM 1
  • BS EN ISO 29822:2014 Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols
    CORRIGENDUM 1
  • BS EN ISO 29841:2014 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a’ (pheophytins a, a’ and pyropheophytins)
    CORRIGENDUM 1
  • BS EN 50128:2011 Railway applications. Communication, signalling and processing systems. Software for railway control and protection systems
    CORRIGENDUM 1
  • BS EN 50131-2-2:2008 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Passive infrared detectors
    CORRIGENDUM 1
  • BS EN 50131-2-3:2008 Alarm systems. Intrusion and hold-up systems. Requirements for microwave detectors
    CORRIGENDUM 1
  • BS EN 50131-2-4:2008 Alarm systems. Intrusion and hold-up systems. Requirements for combined passive infrared and microwave detectors
    CORRIGENDUM 1
  • BS EN 50131-2-5:2008 Alarm systems. Intrusion and hold-up systems. Requirements for combined passive infrared and ultrasonic detectors
    CORRIGENDUM 1
  • BS EN 50131-2-6:2008 Alarm systems. Intrusion and hold-up systems. Opening contacts (magnetic)
    CORRIGENDUM 1
  • PD CLC/TS 50131-2-8:2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors
    CORRIGENDUM 1
  • BS EN 50492:2008+A1:2014 Basic standard for the in-situ measurement of electromagnetic field strength related to human exposure in the vicinity of base stations
    AMENDMENT 1
  • BS EN 55020:2007+A11:2011 Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement
    CORRIGENDUM 4
  • BS EN 60079-0:2012+A11:2013 Explosive atmospheres. Equipment. General requirements
    AMENDMENT 11
  • BS EN 60335-1:2012 Household and similar electrical appliances. Safety. General requirements
    CORRIGENDUM 2
  • BS EN 60335-2-9:2003+A13:2010 Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances
    CORRIGENDUM 4
  • BS EN 60335-2-21:2003+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for storage water heaters
    CORRIGENDUM 3
  • BS EN 60335-2-76:2005+A12:2010 Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
    CORRIGENDUM 3
  • BS EN 60601-1-3:2008+A1:2013 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: Radiation protection in diagnostic X-ray equipment
    CORRIGENDUM 2
  • BS EN 60684-3-216:2005+A2:2014 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
    AMENDMENT 2
  • BS EN 60684-3-280:2010+A1:2014 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, anti-tracking
    AMENDMENT 1
  • BS EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals
    CORRIGENDUM 1
  • BS EN 60838-2-1:1996 Miscellaneous lampholders. Particular requirements. Lampholders S14
    CORRIGENDUM 3
  • BS EN 60893-3-4:2004+A1:2012 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins
    CORRIGENDUM 1
  • BS EN 60947-3:2009+A1:2012 Low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
    CORRIGENDUM 2
  • BS EN 61034-1:2005+A1:2014 Measurement of smoke density of cables burning under defined conditions. Test apparatus
    AMENDMENT 1
  • BS EN 61158-4-7:2008 Industrial communication networks. Fieldbus specifications. Data-link layer protocol specification. Type 7 elements
    CORRIGENDUM 1
  • BS EN 61212-1:2006 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Definitions, designations and general requirements
    CORRIGENDUM 1
  • BS EN 61347-2-1:2001+A2:2014 Lamp controlgear. Particular requirements for starting devices (other than glow starters)
    AMENDMENT 2
  • BS EN 61535:2009+A1:2013 Installation couplers intended for permanent connection in fixed installations
    CORRIGENDUM 1
  • BS EN 61883-8:2009+A1:2014 Consumer audio/video equipment. Digital interface. Transmission of ITU-R BT.601 style digital video data
    AMENDMENT 1
  • BS EN 62230:2007+A1:2014 Electric cables. Spark-test method
    AMENDMENT 1
  • BS EN 140401-801:2007+A1:2013 Detail specification: Fixed low power film SMD resistors. Rectangular. Stability classes 0,1; 0,25; 0,5; 1
    AMENDMENT 1
  • BS EN 140401-802:2007+A2:2013 Detail specification: Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2
    AMENDMENT 2
  • BS EN 140401-804:2011+A1:2013 Detail Specification: Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25
    AMENDMENT 1
  • BS ISO 4427-2:2007+A1:2014 Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Pipes
    AMENDMENT 1
  • BS ISO 7295:1988+A1:2014 Tyre valves for aircraft. Interchangeability dimensions
    AMENDMENT 1
  • BS ISO/IEC 7816-12:2005 Identification cards. Integrated circuit cards. Cards with contacts. USB electrical interface and operating procedures
    CORRIGENDUM 1
  • BS ISO/IEC 10373-6:2011+A4:2012 Identification cards. Test methods. Proximity cards
    AMENDMENT 4
  • BS ISO/IEC 14443-1:2008+A1:2012 Identification cards. Contactless integrated circuit cards. Proximity cards. Physical characteristics
    CORRIGENDUM 1
  • BS ISO/IEC 14443-3:2011+A3:2014 Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision
    AMENDMENT 3
  • BS ISO/IEC 14443-4:2008+A4:2014 Identification cards. Contactless integrated circuit cards. Proximity cards. Transmission protocol
    AMENDMENT 4
  • BS ISO/IEC 15946-1:2008 Information technology. Security techniques. Cryptographic techniques based on elliptic curves. General
    CORRIGENDUM 2
  • BS ISO/IEC 19794-8:2011+A1:2014 Information technology. Biometric data interchange formats. Finger pattern skeletal data
    AMENDMENT 1
  • BS ISO/IEC 24727-2:2008+A1:2014 Identification cards. Integrated circuit card programming interfaces. Generic card interface
    AMENDMENT 1
  • BS ISO/IEC 24727-4:2008+A1:2014 Identification cards. Integrated circuit card programming interfaces. Application programming interface (API) administration
    AMENDMENT 1
  • PD ISO/IEC TR 29106:2007+A1:2012 Information technology. Generic cabling. Introduction to the MICE environmental classification
    AMENDMENT 1
  • BS ISO/IEC 29150:2011 Information technology. Security techniques. Signcryption
    CORRIGENDUM 1
  • BS IEC 62443-3-3:2013 Industrial communication networks. Network and system security. System security requirements and security levels
    CORRIGENDUM 1

British standards withdrawn

  • BS 1902-9.1:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
    Superseded by BS EN ISO 12677:2011
  • BS 2464-2:1969 Specification for hose couplings for petrol, oil and lubricants. High pressure couplings
    Superseded by PD CEN/TS 16650:2014
  • BS 5979:2007 Remote centres receiving signals from fire and security systems. Code of practice
    Superseded by BS 8591:2014
  • BS 6100-1:2004 (BS ISO 6707-1:2004) Building and civil engineering. Vocabulary. General terms
    Superseded by BS ISO 6707-1:2014
  • BS 6100-10:2007 Building and civil engineering. Vocabulary. Contract terms
    Superseded by BS ISO 6707-2:2014
  • BS 6299:1982 (CISPR 17:1981) Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
    Superseded by BS EN 55017:2011
  • BS 6955-5:1994 (ISO 5347-5:1993) Calibration of vibration and shock pick-ups. Method for calibration by earth’s gravitation
    Superseded by BS ISO 16063-16:2014
  • BS 7862:1996 (ISO 14104:1995) Gears. Surface temper etch inspection after grinding
    Superseded by BS ISO 14104:2014
  • BS 7928:1998 Specification for head protectors for cricketers
    Superseded by BS 7928:2013
  • BS EN 36:1999 Wall-hung bidets with over-rim supply. Connecting dimensions
    Superseded by BS EN 35:2014
  • BS EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
    Superseded by BS EN 16191:2014
  • BS EN 1782:1998+A1:2009 Tracheal tubes and connectors
    Superseded by BS EN ISO 5361:2012
  • BS EN 1866:2005 Mobile fire extinguishers
    Superseded by BS EN 1866-1:2007, BS EN 1866-2:2014 and BS EN 1866-3:2013
  • BS EN 12336:2005+A1:2008 Tunnelling machines. Shield machines, thrust boring machines, auger boring machines, lining erection equipment. Safety requirements
    Superseded by BS EN 16191:2014
  • BS EN 14114:2002 Hygrothermal performance of building equipment and industrial installations. Calculation of water vapour diffusion. Cold pipe insulation systems
    Superseded by BS EN ISO 15758:2014
  • BS EN 14153-1:2003 Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 1. Supervised Diver
    Superseded by BS EN ISO 24801-1:2014
  • BS EN 14153-2:2003 Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 2. Autonomous Diver
    Superseded by BS EN ISO 24801-2:2014
  • BS EN 14153-3:2003 Recreational diving services. Safety related minimum requirements for the training of recreational scuba divers. Level 3. Dive Leader
    Superseded by BS EN ISO 24801-3:2014
  • BS EN 14413-1:2004 Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 1
    Superseded by BS EN ISO 24802-1:2014
  • BS EN 14413-2:2004 Recreational diving services. Safety related minimum requirements for the training of scuba instructors. Level 2
    Superseded by BS EN ISO 24802-2:2014
  • BS EN 14665:2004 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
    Superseded by BS EN ISO 12671:2014
  • BS EN 14907:2005 Ambient air quality. Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
    Superseded by BS EN 12341:2014
  • DD CEN/TS 15480-3:2010 Identification card systems. European citizen card. European citizen card interoperability using an application interface
    Superseded by PD CEN/TS 15480-3:2014
  • DD CEN/TS 15534-3:2007 Wood-plastics composites (WPC). Characterisation of WPC products
    Superseded by BS EN 15534-4:2014 and BS EN 15534-5:2014
  • BS EN ISO 19115:2005 Geographic information. Metadata
    Superseded by BS EN ISO 19115-1:2014
  • BS EN 20140-2:1993 (BS 2750-2:1993, ISO 140-2:1991) Determination, verification and application of precision data
    Superseded by BS EN ISO 12999-1:2014
  • BS EN 50164-5:2009 Lightning protection components (LPC). Requirements for earth electrode inspection housings and earth electrode seals
    Superseded by BS EN 62561-5:2011
  • BS EN 50164-6:2009 Lightning protection components (LPC). Requirements for lightning strike counters
    Superseded by BS EN 62561-6:2011
  • BS EN 55016-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainty in EMC measurements
    Superseded by BS EN 55016-4-2:2011
  • BS EN 60034-16-1:1996 Rotating electrical machines. Excitation systems for synchronous machines. Definitions
    Superseded by BS EN 60034-16-1:2011
  • BS EN 60265-1:1998 Specification for high-voltage switches. Switches for rated voltages above 1 kV and less than 52 kV
    Superseded by BS EN 62271-103:2011
  • BS EN 60335-2-40:2003+A2:2009 Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    Superseded by BS EN 60335-2-40:2003+A13:2012
  • BS EN 60684-3-271:2004 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
    Superseded by BS EN 60684-3-271:2011
  • BS EN 60893-3-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on epoxy resins
    Superseded by BS EN 60893-3-2:2004+A1:2011
  • BS EN 60925:1991 Specification for performance requirements for d.c. supplied electronic ballasts for tubular fluorescent lamps
    Superseded by BS EN 60929:2011
  • BS EN 60929:2006 A.C. supplied electronic ballasts for tubular fluorescent lamps. Performance requirements
    Superseded by BS EN 60929:2011
  • BS EN 60947-4-2:2000 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters
    Superseded by BS EN 60947-4-2:2012
  • BS EN 61000-3-12:2005 Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16A and ≤ 75A per phase
    Superseded by BS EN 61000-3-12:2011
  • BS EN 61337-1-1:1998 Filters using waveguide type dielectric resonators. General information, standard values and test conditions. General information and standard values
    Superseded by BS EN 171000:2001
  • BS EN 61347-2-3:2001+A2:2006 Lamp controlgear. Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
    Superseded by BS EN 61347-2-3:2011
  • BS EN 61347-2-4:2001 Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for general lighting
    Superseded by BS EN 61347-2-3:2011
  • BS EN 61347-2-5:2001 Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for public transport lighting
    Superseded by BS EN 61347-2-3:2011
  • BS EN 61347-2-6:2001 Lamp controlgear. Particular requirements for d.c. supplied electronic ballasts for aircraft lighting
    Superseded by BS EN 61347-2-3:2011
  • BS EN 61534-1:2003 Powertrack systems. General requirements
    Superseded by BS EN 61534-1:2011
  • BS EN 61850-9-1:2003 Communication networks and systems in substations. Specific communication service mapping (SCSM). Sampled values over serial unidirectional multidrop point to point link
    This standard is withdrawn as it is no longer relevant
  • BS EN 61858:2008 Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
    Superseded by BS EN 61858-1:2014
  • BS EN 61951-2:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-metal hydride
    Superseded by BS EN 61951-2:2011
  • BS EN 61960:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
    Superseded by BS EN 61960:2011
  • BS EN 61970-402:2008 Energy management system application program interface (EMS-API). Common services
    This standard is withdrawn as it is no longer relevant
  • BS EN 61970-403:2008 Energy management system application program interface (EMS-API). Generic data access
    This standard is withdrawn as it is no longer relevant
  • BS EN 61970-404:2007 Energy management system application program interface (EMS-API). High speed data access (HSDA)
    This standard is withdrawn as it is no longer relevant
  • BS EN 61970-405:2007 Energy management system application program interface (EMS-API). Generic eventing and subscription (GES)
    This standard is withdrawn as it is no longer relevant
  • BS EN 61970-407:2007 Energy management system application program interface (EMS-API). Time series data access (TSDA)
    This standard is withdrawn as it is no longer relevant
  • BS EN 62271-1:2008 High-voltage switchgear and controlgear. Common specifications
    Superseded by BS EN 62271-1:2008+A1:2011
  • DD ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
    Superseded by PD CEN/TR 13801:2014
  • BS ISO 8009-1:1997 Reusable rubber contraceptive diaphragms. Classification, sampling and requirements
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-2:1985 Reusable rubber contraceptive diaphragms. Determination of size
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-3:1985 Reusable rubber contraceptive diaphragms. Determination of dome thickness
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-4:1996 Reusable rubber contraceptive diaphragms. Freedom from visible defects
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-5:1996 Reusable rubber contraceptive diaphragms. Determination of tensile properties
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-6:1985 Reusable rubber contraceptive diaphragms. Determination of deterioration after accelerated ageing
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-7:1985 Reusable rubber contraceptive diaphragms. Determination of compression resistance of coil spring and flat spring diaphragms
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-8:1985 Reusable rubber contraceptive diaphragms. Determination of twisting during compression of coil spring and flat spring diaphragms
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-9:1985 Reusable rubber contraceptive diaphragms. Packaging and labelling
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • BS ISO 8009-10:1985 Reusable rubber contraceptive diaphragms. Recommendations for storage
    This standard has been withdrawn as this series of standards has been out of date for many years. The corresponding ISO standards were superseded by ISO 8009:2004, which was not implemented at the time because of technical errors and limited relevance in the United Kingdom. A new edition of ISO 8009 is due to be published later this year and will be implemented as a British Standard
  • DD CEN ISO/TS 11133-1:2009 Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. General guidelines on quality assurance for the preparation of culture media in the laboratory
    Superseded by BS EN ISO 11133:2014
  • DD CEN ISO/TS 11133-2:2003+A1:2011 Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. Practical guidelines on performance testing of culture media
    Superseded by BS EN ISO 11133:2014
  • BS ISO 11564:1998 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method
    This standard is withdrawn as the method described is not used in the UK and the relevant method included in BS EN 14792 is used instead. Additionally the results and consistency of the BS ISO 11564 method has been called into question by the UK methods
  • DD ISO/TS 16457:2009 Space systems. Space environment (natural and artificial). The Earth’s ionosphere model. International reference ionosphere (IRI) model and extensions to the plasmasphere
    Superseded by BS ISO 16457:2014
  • PD ISO/TR 23462:2007 Space systems. Guidelines to define the management framework for a space project
    Superseded by BS ISO 23462:2014
  • BS ISO 24615:2010 Language resource management. Syntactic annotation framework (SynAF)
    Superseded by BS ISO 24615-1:2014
  • BS ISO 25119-1:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. General principles for design and development
    Superseded by BS EN 16590-1:2014
  • BS ISO 25119-2:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Concept phase
    Superseded by BS EN 16590-2:2014
  • BS ISO 25119-3:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Series development, hardware and software
    Superseded by BS EN 16590-3:2014
  • BS ISO 25119-4:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Production, operation, modification and supporting processes
    Superseded by BS EN 16590-4:2014
  • DD IEC/TS 60695-9-2:2005 Fire hazard testing. Surface spread of flame. Summary and relevance of test methods
    Superseded by BS EN 60695-9-2:2014
  • PD CR 14473:2002 Transportable gas cylinders. Porous masses for acetylene cylinders
    Superseded by PD CEN/TR 14473:2014
  • PD ISO/IEC TR 15026-1:2010 Systems and software engineering. Systems and software assurance. Concepts and vocabulary
    Superseded by BS ISO/IEC 15026-1:2013
  • BS M 77:1994 (ISO 11077:1993) Self-propelled de-icing/anti-icing vehicles. Functional requirements
    Superseded by BS ISO 11077:2014
  • BS M 84:1995 (ISO 10327:1995) Air cargo equipment. Certified aircraft container for air cargo. Specification and testing
    Superseded by BS ISO 10327:2014
  • PAS 200:2011 Crisis management. Guidance and good practice
    BS 11200:2014 is based on PAS 200:2011

Published in international.