ASTM publications

Here are recent publications from ASTM International. To purchase ASTM standards in hard copy or PDF format, please call 0800 782 632 during business hours or email enquiries@standards.co.nz.

  • A6/A6M - Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling has been revised to A6/A6M-14 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A106/A106M - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service has been revised to A106/A106M-14 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A109/A109M - Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled has been revised to A109/A109M-14 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A182/A182M - Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service has been revised to A182/A182M-14a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A193/A193M - Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications has been revised to A193/A193M-14 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A194/A194M - Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both has been revised to A194/A194M-14 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A217/A217M - Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service has been revised to A217/A217M-14 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A269/A269M - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service has been editorially changed, available as A269/A269M-14e1 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A297/A297M - Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application has been revised to A297/A297M-14 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A320/A320M - Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service has been revised to A320/A320M-14 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A342/A342M - Standard Test Methods for Permeability of Weakly Magnetic Materials has been revised (with title change) to A342/A342M-14 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A343/A343M - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame has been revised to A343/A343M-14 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A345 - Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications has been revised to A345-14 developed by Committee A06.02, ASTM BOS Volume 03.04.
  • A370 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products has been revised to A370-14 developed by Committee A01.13, ASTM BOS Volume 01.03.
  • A414/A414M - Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels has been revised to A414/A414M-14 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A479/A479M - Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels has been revised to A479/A479M-14 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A494/A494M - Standard Specification for Castings, Nickel and Nickel Alloy has been revised to A494/A494M-14 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A498/A498M - Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins has been revised (with designation change) to A498/A498M-14 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A504/A504M - Standard Specification for Wrought Carbon Steel Wheels has been revised to A504/A504M-14 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A514/A514M - Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding has been revised to A514/A514M-14 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A554 - Standard Specification for Welded Stainless Steel Mechanical Tubing has been revised to A554-14 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A596/A596M - Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens has been revised to A596/A596M-14 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A664 - Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications has been revised to A664-14 developed by Committee A06.02, ASTM BOS Volume 03.04.
  • A675/A675M - Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties has been revised to A675/A675M-14 developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A712 - Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys has been revised to A712-14 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A719/A719M - Standard Test Method for Lamination Factor of Magnetic Materials has been revised to A719/A719M-14 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A749/A749M - Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for has been revised to A749/A749M-14 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A781/A781M - Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A781/A781M-14a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A788/A788M - Standard Specification for Steel Forgings, General Requirements has been revised to A788/A788M-14 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A800/A800M - Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof has been revised to A800/A800M-14 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A872/A872M - Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments has been revised to A872/A872M-14 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A889/A889M - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame has been revised to A889/A889M-14 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A896/A896M - Standard Practice for Conducting Case Studies on Galvanized Structures has been reapproved, available as A896/A896M-09(2014) developed by Committee A05.13, ASTM BOS Volume 01.06.
  • A904 - Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts has been revised to A904-14 developed by Committee A06.02, ASTM BOS Volume 03.04.
  • A913/A913M - Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) has been revised to A913/A913M-14a developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A951/A951M - Standard Specification for Steel Wire for Masonry Joint Reinforcement has been revised to A951/A951M-14 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A962/A962M - Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range has been revised to A962/A962M-14 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A965/A965M - Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts has been revised to A965/A965M-14 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A990/A990M - Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service has been revised to A990/A990M-14 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A1004/A1004M - Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members has been reapproved, available as A1004/A1004M-99(2014) developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A1022/A1022M - Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement has been revised to A1022/A1022M-14 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1054 - Standard Specification for Sintered Ceramic Ferrite Permanent Magnets has been revised to A1054-14 developed by Committee A06.02, ASTM BOS Volume 03.04.
  • A1057/A1057M - Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process has been reapproved, available as A1057/A1057M-08(2014) developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A1058 - Standard Test Methods for Mechanical Testing of Steel Products—Metric has been revised to A1058-14 developed by Committee A01.13, ASTM BOS Volume 01.03.
  • A1080 - Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings has been revised to A1080-14 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • B30 - Standard Specification for Copper Alloys in Ingot Form has been revised to B30-14 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B43 - Standard Specification for Seamless Red Brass Pipe, Standard Sizes has been revised to B43-14 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B224 - Standard Classification of Coppers has been revised to B224-14 developed by Committee B05.07, ASTM BOS Volume 02.01.
  • B296 - Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought has been reapproved, available as B296-03(2014) developed by Committee B07.04, ASTM BOS Volume 02.02.
  • B312 - Standard Test Method for Green Strength of Specimens Compacted from Metal Powders has been revised to B312-14 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B363 - Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings has been revised to B363-14 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B368 - Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) has been reapproved, available as B368-09(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B483/B483M - Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications has been editorially changed, available as B483/B483M-13e1 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B490 - Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits has been reapproved, available as B490-09(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B493/B493M - Standard Specification for Zirconium and Zirconium Alloy Forgings has been revised to B493/B493M-14 developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B499 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals has been reapproved, available as B499-09(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B507 - Standard Practice for Design of Articles to Be Electroplated on Racks has been revised to B507-14 developed by Committee B08.01, ASTM BOS Volume 02.05.
  • B530 - Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates has been reapproved, available as B530-09(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B532 - Standard Specification for Appearance of Electroplated Plastic Surfaces has been reapproved, available as B532-85(2014) developed by Committee B08.08, ASTM BOS Volume 02.05.
  • B568 - Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry has been reapproved, available as B568-98(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B584 - Standard Specification for Copper Alloy Sand Castings for General Applications has been revised to B584-14 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B626 - Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube has been revised to B626-14 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B659 - Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings has been reapproved, available as B659-90(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B668 - Standard Specification for UNS N08028 and N08029 Seamless Pipe and Tube has been revised (with title change) to B668-14 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B700 - Standard Specification for Electrodeposited Coatings of Silver for Engineering Use has been reapproved, available as B700-08(2014) developed by Committee B08.04, ASTM BOS Volume 02.05.
  • B764 - Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test) has been reapproved, available as B764-04(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B788/B788M - Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe has been reapproved, available as B788/B788M-09(2014) developed by Committee B07.08, ASTM BOS Volume 02.02.
  • B831 - Standard Test Method for Shear Testing of Thin Aluminum Alloy Products has been revised to B831-14 developed by Committee B07.05, ASTM BOS Volume 02.02.
  • B839 - Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method has been reapproved, available as B839-04(2014) developed by Committee B08.10, ASTM BOS Volume 02.05.
  • B928/B928M - Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments has been revised to B928/B928M-14 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B989 - Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings is a new standard, now available. B989-14 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • C39/C39M - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens has been revised to C39/C39M-14a developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C94/C94M - Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-14a developed by Committee C09.40, ASTM BOS Volume 04.02.
  • C148 - Standard Test Methods for Polariscopic Examination of Glass Containers has been revised to C148-14 developed by Committee C14.07, ASTM BOS Volume 15.02.
  • C149 - Standard Test Method for Thermal Shock Resistance of Glass Containers has been revised to C149-14 developed by Committee C14.07, ASTM BOS Volume 15.02.
  • C157/C157M - Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete has been editorially changed, available as C157/C157M-08e1 developed by Committee C09.68, ASTM BOS Volume 04.02.
  • C170/C170M - Standard Test Method for Compressive Strength of Dimension Stone has been revised to C170/C170M-14 developed by Committee C18.01, ASTM BOS Volume 04.07.
  • C231/C231M - Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method has been revised to C231/C231M-14 developed by Committee C09.60, ASTM BOS Volume 04.02.
  • C270 - Standard Specification for Mortar for Unit Masonry has been revised to C270-14 developed by Committee C12.03, ASTM BOS Volume 04.05.
  • C346 - Standard Test Method for 45-deg Specular Gloss of Ceramic Materials has been reapproved, available as C346-87(2014) developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C374 - Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods) has been revised to C374-14 developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C385 - Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils has been reapproved, available as C385-58(2014) developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C534/C534M - Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form has been revised to C534/C534M-14 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C536 - Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing has been reapproved (with editorial change), available as C536-83(2014)e1 developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C537 - Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage has been reapproved (with editorial change), available as C537-87(2014)e1 developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C538 - Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels has been reapproved (with editorial change), available as C538-83(2014)e1 developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C564 - Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings has been revised to C564-14 developed by Committee A04.75, ASTM BOS Volume 01.02.
  • C567/C567M - Standard Test Method for Determining Density of Structural Lightweight Concrete has been revised to C567/C567M-14 developed by Committee C09.21, ASTM BOS Volume 04.02.
  • C595/C595M - Standard Specification for Blended Hydraulic Cements has been revised to C595/C595M-14 developed by Committee C01.10, ASTM BOS Volume 04.01.
  • C603 - Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants has been revised to C603-14 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C637 - Standard Specification for Aggregates for Radiation-Shielding Concrete has been revised to C637-14 developed by Committee C09.41, ASTM BOS Volume 04.02.
  • C638 - Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete has been revised to C638-14 developed by Committee C09.41, ASTM BOS Volume 04.02.
  • C704/C704M - Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature has been revised to C704/C704M-14 developed by Committee C08.03, ASTM BOS Volume 15.01.
  • C717 - Standard Terminology of Building Seals and Sealants has been revised to C717-14a developed by Committee C24.01, ASTM BOS Volume 04.07.
  • C743 - Standard Test Method for Continuity of Porcelain Enamel Coatings has been reapproved (with editorial change), available as C743-87(2014)e1 developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C772 - Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants has been reapproved, available as C772-03(2014) developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C834 - Standard Specification for Latex Sealants has been revised to C834-14 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C847 - Standard Specification for Metal Lath has been revised to C847-14 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C856 - Standard Practice for Petrographic Examination of Hardened Concrete has been revised to C856-14 developed by Committee C09.65, ASTM BOS Volume 04.02.
  • C859 - Standard Terminology Relating to Nuclear Materials has been revised to C859-14a developed by Committee C26.01, ASTM BOS Volume 12.01.
  • C878/C878M - Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete has been revised to C878/C878M-14a developed by Committee C09.68, ASTM BOS Volume 04.02.
  • C920 - Standard Specification for Elastomeric Joint Sealants has been revised to C920-14a developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C926 - Standard Specification for Application of Portland Cement-Based Plaster has been revised to C926-14a developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1032 - Standard Specification for Woven Wire Plaster Base has been revised to C1032-14 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C1038/C1038M - Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water has been revised to C1038/C1038M-14a developed by Committee C01.28, ASTM BOS Volume 04.01.
  • C1047 - Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base has been revised to C1047-14a developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C1062 - Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities has been reapproved, available as C1062-00(2014) developed by Committee C26.09, ASTM BOS Volume 12.01.
  • C1063 - Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster has been revised to C1063-14b developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1107/C1107M - Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) has been revised to C1107/C1107M-14 developed by Committee C09.43, ASTM BOS Volume 04.02.
  • C1126 - Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation has been revised to C1126-14 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1163 - Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride has been revised to C1163-14 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1170/C1170M - Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table has been editorially changed, available as C1170/C1170M-14e1 developed by Committee C09.45, ASTM BOS Volume 04.02.
  • C1184 - Standard Specification for Structural Silicone Sealants has been revised to C1184-14 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1204 - Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration has been revised to C1204-14 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1242 - Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems has been revised to C1242-14 developed by Committee C18.06, ASTM BOS Volume 04.07.
  • C1264 - Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products has been revised to C1264-14 developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C1277 - Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings has been revised to C1277-14 developed by Committee A04.75, ASTM BOS Volume 01.02.
  • C1281 - Standard Specification for Preformed Tape Sealants for Glazing Applications has been revised to C1281-14 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1295 - Standard Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution has been revised to C1295-14 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1301 - Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA) has been reapproved, available as C1301-95(2014) developed by Committee C07.05, ASTM BOS Volume 04.01.
  • C1307 - Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry has been revised to C1307-14 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1311 - Standard Specification for Solvent Release Sealants has been revised to C1311-14 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1347 - Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis has been editorially changed, available as C1347-08(2014)e1 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1369 - Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units has been reapproved, available as C1369-07(2014) developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1374 - Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation has been revised to C1374-14 developed by Committee C16.32, ASTM BOS Volume 04.06.
  • C1415 - Standard Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry has been revised to C1415-14 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1429 - Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer has been reapproved, available as C1429-99(2014) developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1459 - Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems has been reapproved, available as C1459-04(2014) developed by Committee C17.02, ASTM BOS Volume 04.05.
  • C1501 - Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures has been revised to C1501-14 developed by Committee C24.40, ASTM BOS Volume 04.07.
  • C1539 - Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting has been reapproved, available as C1539-08(2014) developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1589/C1589M - Standard Practice for Outdoor Weathering of Construction Seals and Sealants has been revised to C1589/C1589M-14 developed by Committee C24.40, ASTM BOS Volume 04.07.
  • C1611/C1611M - Standard Test Method for Slump Flow of Self-Consolidating Concrete has been revised to C1611/C1611M-14 developed by Committee C09.47, ASTM BOS Volume 04.02.
  • C1629/C1629M - Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels has been revised to C1629/C1629M-14 developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C1643 - Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants has been revised to C1643-14 developed by Committee C24.61, ASTM BOS Volume 04.07.
  • C1649 - Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated has been revised to C1649-14 developed by Committee C14.11, ASTM BOS Volume 15.02.
  • C1650 - Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated has been revised to C1650-14 developed by Committee C14.11, ASTM BOS Volume 15.02.
  • C1652/C1652M - Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids has been revised to C1652/C1652M-14 developed by Committee C14.11, ASTM BOS Volume 15.02.
  • C1679 - Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry has been revised to C1679-14 developed by Committee C09.48, ASTM BOS Volume 04.02.
  • C1681 - Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain has been revised to C1681-14 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C1688/C1688M - Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete has been revised to C1688/C1688M-14 developed by Committee C09.49, ASTM BOS Volume 04.02.
  • C1712 - Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test has been revised to C1712-14 developed by Committee C09.47, ASTM BOS Volume 04.02.
  • C1738/C1738M - Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes has been revised to C1738/C1738M-14 developed by Committee C01.22, ASTM BOS Volume 04.01.
  • C1763 - Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials is a new standard, now available. C1763-14 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C1790 - Standard Specification for Fly Ash Facing Brick is a new standard, now available. C1790-14 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C1799/C1799M - Standard Guide to Dimension Stone Test Specimen Sampling and Preparation is a new standard, now available. C1799/C1799M-14 developed by Committee C18.08, ASTM BOS Volume 04.07.
  • D75/D75M - Standard Practice for Sampling Aggregates has been revised to D75/D75M-14 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D140/D140M - Standard Practice for Sampling Bituminous Materials has been revised to D140/D140M-14 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D243/D243M - Standard Test Method for Residue of Specified Penetration has been revised (with designation change) to D243/D243M-14 developed by Committee D04.46, ASTM BOS Volume 04.03.
  • D257 - Standard Test Methods for DC Resistance or Conductance of Insulating Materials has been revised to D257-14 developed by Committee D09.12, ASTM BOS Volume 10.01.
  • D396 - Standard Specification for Fuel Oils has been revised to D396-14 developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D623 - Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression has been reapproved, available as D623-07(2014) developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D813 - Standard Test Method for Rubber Deterioration—Crack Growth has been reapproved, available as D813-07(2014) developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D854 - Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer has been revised to D854-14 developed by Committee D18.03, ASTM BOS Volume 04.08.
  • D885/D885M - Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers has been reapproved, available as D885/D885M-10a(2014) developed by Committee D13.19, ASTM BOS Volume 07.01.
  • D925 - Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion) has been revised to D925-14 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D1052 - Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus has been reapproved, available as D1052-09(2014) developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D1239 - Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals has been revised to D1239-14 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D1356 - Standard Terminology Relating to Sampling and Analysis of Atmospheres has been revised to D1356-14a developed by Committee D22.01, ASTM BOS Volume 11.07.
  • D1596 - Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material has been revised to D1596-14 developed by Committee D10.13, ASTM BOS Volume 15.10.
  • D1622/D1622M - Standard Test Method for Apparent Density of Rigid Cellular Plastics has been revised (with designation change) to D1622/D1622M-14 developed by Committee D20.22, ASTM BOS Volume 08.01.
  • D1668/D1668M - Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing has been reapproved (with editorial change), available as D1668/D1668M-97a(2014)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D1698 - Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils (Withdrawn 2014) has been withdrawn, with no replacement. D1698- developed by Committee D27.07, ASTM BOS Volume 10.03.
  • D1711 - Standard Terminology Relating to Electrical Insulation has been revised to D1711-14 developed by Committee D09.94, ASTM BOS Volume 10.01.
  • D1839 - Standard Test Method for Amyl Nitrate in Diesel Fuels has been revised to D1839-14 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D1849 - Standard Test Method for Package Stability of Paint has been reapproved (with editorial change), available as D1849-95R14e1 developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D1871 - Standard Test Method for Adhesion Between Tire Bead Wire and Rubber has been reapproved, available as D1871-04(2014) developed by Committee D13.19, ASTM BOS Volume 07.01.
  • D2068 - Standard Test Method for Determining Filter Blocking Tendency has been revised to D2068-14 developed by Committee D02.14, ASTM BOS Volume 05.01.
  • D2099 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester has been revised to D2099-14 developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D2162 - Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards has been revised to D2162-14 developed by Committee D02.07, ASTM BOS Volume 05.01.
  • D2229 - Standard Test Method for Adhesion Between Steel Tire Cords and Rubber has been reapproved, available as D2229-10(2014) developed by Committee D13.19, ASTM BOS Volume 07.01.
  • D2244 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates has been revised to D2244-14 developed by Committee E12.04, ASTM BOS Volume 06.01.
  • D2322 - Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration has been revised to D2322-14 developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D2395 - Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials has been revised (with title change) to D2395-14 developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D2501 - Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils has been revised to D2501-14 developed by Committee D02.04.0K, ASTM BOS Volume 05.01.
  • D2502 - Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements has been revised to D2502-14 developed by Committee D02.04.0K, ASTM BOS Volume 05.01.
  • D2513 - Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings has been editorially changed, available as D2513-14e1 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • D2665 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings has been revised to D2665-14 developed by Committee F17.63, ASTM BOS Volume 08.04.
  • D2692/D2692M - Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns has been reapproved, available as D2692/D2692M-10(2014) developed by Committee D13.19, ASTM BOS Volume 07.01.
  • D2893 - Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils has been reapproved (with editorial change), available as D2893-04(2014)e1 developed by Committee D02.09.0D, ASTM BOS Volume 05.01.
  • D2969 - Standard Test Methods for Steel Tire Cords has been reapproved, available as D2969-04(2014) developed by Committee D13.19, ASTM BOS Volume 07.01.
  • D2970/D2970M - Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments has been reapproved, available as D2970/D2970M-04(2014) developed by Committee D13.19, ASTM BOS Volume 07.01.
  • D3039/D3039M - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials has been revised to D3039/D3039M-14 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D3136 - Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products has been revised to D3136-14 developed by Committee D13.62, ASTM BOS Volume 07.01.
  • D3154 - Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) has been revised to D3154-14 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D3161/D3161M - Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method) has been revised to D3161/D3161M-14 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D3241 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels has been revised to D3241-14 developed by Committee D02.J0.03, ASTM BOS Volume 05.01.
  • D3265 - Standard Test Method for Carbon Black—Tint Strength has been revised to D3265-14 developed by Committee D24.21, ASTM BOS Volume 09.01.
  • D3393 - Standard Specification for Coated Fabrics—Waterproofness has been reapproved, available as D3393-91(2014) developed by Committee D11.37, ASTM BOS Volume 09.02.
  • D3427 - Standard Test Method for Air Release Properties of Petroleum Oils has been revised to D3427-14 developed by Committee D02.C0.02, ASTM BOS Volume 05.01.
  • D3464 - Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer has been reapproved, available as D3464-96(2014) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D3475 - Standard Classification of Child-Resistant Packages has been revised to D3475-14 developed by Committee D10.32, ASTM BOS Volume 15.10.
  • D3649 - Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water has been reapproved, available as D3649-06(2014) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D3670 - Standard Guide for Determination of Precision and Bias of Methods of Committee D22 has been reapproved, available as D3670-91(2014) developed by Committee D22.01, ASTM BOS Volume 11.07.
  • D3710 - Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography has been withdrawn and replaced by D7096 developed by Committee D02.04.0H, ASTM BOS Volume 05.01.
  • D3755 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress has been reinstated as D3755-14 developed by Committee D09.12, ASTM BOS Volume 10.02.
  • D3822/D3822M - Standard Test Method for Tensile Properties of Single Textile Fibers has been revised (with designation change) to D3822/D3822M-14 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D4016 - Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method) has been revised (with title change) to D4016-14 developed by Committee D18.15, ASTM BOS Volume 04.08.
  • D4046 - Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry has been revised to D4046-14 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D4050 - Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems has been revised to D4050-14 developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D4186/D4186M - Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading has been editorially changed, available as D4186/D4186M-12e1 developed by Committee D18.05, ASTM BOS Volume 04.08.
  • D4373 - Standard Test Method for Rapid Determination of Carbonate Content of Soils has been revised to D4373-14 developed by Committee D18.06, ASTM BOS Volume 04.08.
  • D4411 - Standard Guide for Sampling Fluvial Sediment in Motion has been editorially changed, available as D4411-03(2014)e1 developed by Committee D19.07, ASTM BOS Volume 11.02.
  • D4476/D4476M - Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods has been revised (with designation change) to D4476/D4476M-14 developed by Committee D20.18, ASTM BOS Volume 08.02.
  • D4483 - Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries has been revised to D4483-14a developed by Committee D11.16, ASTM BOS Volume 09.01.
  • D4522 - Standard Performance Specification for Feather and Down Fillings for Textile Products has been revised to D4522-14 developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D4566 - Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable has been revised to D4566-14 developed by Committee D09.18, ASTM BOS Volume 10.02.
  • D4607 - Standard Test Method for Determination of Iodine Number of Activated Carbon has been revised to D4607-14 developed by Committee D28.02, ASTM BOS Volume 15.01.
  • D4636 - Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils has been revised to D4636-14 developed by Committee D02.09.0D, ASTM BOS Volume 05.02.
  • D4637/D4637M - Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane has been editorially changed, available as D4637/D4637M-14e1 developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D4650 - Standard Specification for Normal Butane Thermophysical Property Tables has been revised to D4650-14 developed by Committee D03.08, ASTM BOS Volume 05.06.
  • D4651 - Standard Specification for Isobutane Thermophysical Property Tables has been revised to D4651-14 developed by Committee D03.08, ASTM BOS Volume 05.06.
  • D4675 - Standard Guide for Selection and Use of Flat Strapping Materials has been revised to D4675-14 developed by Committee D10.25, ASTM BOS Volume 15.10.
  • D4687 - Standard Guide for General Planning of Waste Sampling has been revised to D4687-14 developed by Committee D34.01.01, ASTM BOS Volume 11.04.
  • D4806 - Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel has been revised to D4806-14 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D4814 - Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-14a developed by Committee D02.A0.01, ASTM BOS Volume 05.02.
  • D4830/D4830M - Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing has been reapproved (with editorial change), available as D4830/D4830M-98(2014)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D4874 - Standard Test Method for Leaching Solid Material in a Column Apparatus has been reapproved, available as D4874-95(2014) developed by Committee D34.01.04, ASTM BOS Volume 11.04.
  • D4880 - Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire has been revised to D4880-14 developed by Committee D09.01, ASTM BOS Volume 10.02.
  • D4884/D4884M - Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles has been revised to D4884/D4884M-14a developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D4975 - Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel has been revised to D4975-14 developed by Committee D13.19, ASTM BOS Volume 07.02.
  • D4992 - Standard Practice for Evaluation of Rock to be Used for Erosion Control has been revised to D4992-14 developed by Committee D18.17, ASTM BOS Volume 04.08.
  • D5022 - Standard Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use (Withdrawn 2014) has been withdrawn, with no replacement. D5022- developed by Committee D10.32, ASTM BOS Volume 15.10.
  • D5048 - Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame has been revised to D5048-14 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D5059 - Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy has been revised to D5059-14 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5091 - Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications has been reapproved, available as D5091-95(2014) developed by Committee D19.08, ASTM BOS Volume 11.02.
  • D5120 - Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process (Withdrawn 2014) has been withdrawn, with no replacement. D5120- developed by Committee D34.03, ASTM BOS Volume 11.04.
  • D5131 - Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems has been reapproved, available as D5131-90(2014) developed by Committee D19.08, ASTM BOS Volume 11.02.
  • D5207 - Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials has been revised to D5207-14 developed by Committee D20.30, ASTM BOS Volume 08.03.
  • D5220 - Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method has been revised to D5220-14 developed by Committee D18.08, ASTM BOS Volume 04.08.
  • D5225 - Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer has been revised to D5225-14 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D5229/D5229M - Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials has been revised to D5229/D5229M-14 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D5293 - Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5?°C and –35?°C Using Cold-Cranking Simulator has been revised to D5293-14 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D5310 - Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography has been reapproved, available as D5310-10(2014) developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D5334 - Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure has been revised to D5334-14 developed by Committee D18.12, ASTM BOS Volume 04.08.
  • D5335 - Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges has been revised to D5335-14 developed by Committee D18.12, ASTM BOS Volume 04.08.
  • D5358 - Standard Practice for Sampling with a Dipper or Pond Sampler has been reapproved, available as D5358-93(2014) developed by Committee D34.01.03, ASTM BOS Volume 11.04.
  • D5368 - Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014) has been withdrawn, with no replacement. D5368- developed by Committee D34.01.06, ASTM BOS Volume 11.04.
  • D5370 - Standard Specification for Pozzolanic Blended Materials in Construction Applications has been revised to D5370-14 developed by Committee D34.03, ASTM BOS Volume 11.04.
  • D5384 - Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method) has been revised to D5384-14 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5385/D5385M - Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes has been reapproved (with editorial change), available as D5385/D5385M-93(2014)e1 developed by Committee D08.22, ASTM BOS Volume 04.04.
  • D5456 - Standard Specification for Evaluation of Structural Composite Lumber Products has been revised to D5456-14a developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D5489 - Standard Guide for Care Symbols for Care Instructions on Textile Products has been revised to D5489-14 developed by Committee D13.62, ASTM BOS Volume 07.02.
  • D5505 - Standard Practice for Classifying Emulsified Recycling Agents has been revised to D5505-14 developed by Committee D04.41, ASTM BOS Volume 04.03.
  • D5579 - Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test has been revised to D5579-14 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D5600 - Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) has been revised to D5600-14 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5660 - Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium (Withdrawn 2014) has been withdrawn, with no replacement. D5660- developed by Committee D34.03, ASTM BOS Volume 11.04.
  • D5665/D5665M - Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing has been reapproved (with editorial change), available as D5665/D5665M-99(2014)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D5680 - Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers has been revised to D5680-14 developed by Committee D34.01.02, ASTM BOS Volume 11.04.
  • D5704 - Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles has been revised to D5704-14 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D5705 - Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils has been revised to D5705-14 developed by Committee D02.14, ASTM BOS Volume 05.02.
  • D5737/D5737M - Standard Guide for Methods for Measuring Well Discharge has been revised (with designation change) to D5737/D5737M-14 developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D5755 - Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading has been editorially changed, available as D5755-09(2014)e1 developed by Committee D22.07, ASTM BOS Volume 11.07.
  • D5798 - Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines has been revised to D5798-14 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D5830 - Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography has been revised to D5830-14 developed by Committee D34.01.06, ASTM BOS Volume 11.04.
  • D5920 - Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method has been reinstated, with revision to D5920-14 developed by Committee D18.21, ASTM BOS Volume 04.09.
  • D5949 - Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) has been revised to D5949-14 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D5950 - Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) has been revised to D5950-14 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D5964 - Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils forASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils has been reapproved, available as D5964-07(2014) developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D5968 - Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121?°C has been revised to D5968-14 developed by Committee D02.B0.02, ASTM BOS Volume 05.02.
  • D6015 - Standard Test Method for Static Water Absorption of Leather has been revised to D6015-14 developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D6053 - Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes has been revised to D6053-14 developed by Committee D09.01, ASTM BOS Volume 10.02.
  • D6083 - Standard Specification for Liquid Applied Acrylic Coating Used in Roofing (Withdrawn 2014) has been withdrawn, with no replacement. D6083- developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D6121 - Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles has been revised to D6121-14 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D6135 - Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing (Withdrawn 2014) has been withdrawn, with no replacement. D6135- developed by Committee D08.22, ASTM BOS Volume 04.04.
  • D6184 - Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method) (Withdrawn 2014) has been withdrawn, with no replacement. D6184-98(2005) developed by Committee D02.G0.03, ASTM BOS Volume 05.03.
  • D6189 - Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings has been reapproved, available as D6189-97(2014) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D6221/D6221M - Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing has been reapproved (with editorial change), available as D6221/D6221M-00(2014)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D6227 - Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component has been revised to D6227-14 developed by Committee D02.J0.02, ASTM BOS Volume 05.03.
  • D6241 - Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe has been revised to D6241-14 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D6282/D6282M - Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations has been reinstated, with revision to D6282/D6282M-14 developed by Committee D18.21, ASTM BOS Volume 04.09.
  • D6311 - Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design has been reapproved, available as D6311-98(2014) developed by Committee D34.01.01, ASTM BOS Volume 11.04.
  • D6320/D6320M - Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel has been reapproved, available as D6320/D6320M-10(2014) developed by Committee D13.19, ASTM BOS Volume 07.02.
  • D6451/D6451M - Standard Guide for Application of Asphalt Based Protection Board has been reapproved (with editorial change), available as D6451/D6451M-99(2014)e1 developed by Committee D08.22, ASTM BOS Volume 04.04.
  • D6484/D6484M - Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates has been revised to D6484/D6484M-14 developed by Committee D30.05, ASTM BOS Volume 15.03.
  • D6556 - Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption has been revised to D6556-14 developed by Committee D24.21, ASTM BOS Volume 09.01.
  • D6565 - Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method (Withdrawn 2014) has been withdrawn, with no replacement. D6565- developed by Committee D18.21, ASTM BOS Volume 04.09.
  • D6566 - Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats has been revised to D6566-14 developed by Committee D35.05, ASTM BOS Volume 04.13.
  • D6567 - Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM) has been revised to D6567-14 developed by Committee D35.05, ASTM BOS Volume 04.13.
  • D6593 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions has been revised to D6593-14 developed by Committee D02.B0.01, ASTM BOS Volume 05.03.
  • D6594 - Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135?°C has been revised to D6594-14 developed by Committee D02.B0.02, ASTM BOS Volume 05.03.
  • D6615 - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel has been revised to D6615-14a developed by Committee D02.J0.01, ASTM BOS Volume 05.03.
  • D6618 - Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine has been revised to D6618-14 developed by Committee D02.B0.02, ASTM BOS Volume 05.03.
  • D6656 - Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation) has been revised to D6656-14 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D6657 - Standard Test Method for pH of Wet Blue has been revised to D6657-14 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D6660 - Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method has been editorially changed, available as D6660-01(2014)e1 developed by Committee D15.03, ASTM BOS Volume 15.05.
  • D6681 - Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure has been revised to D6681-14 developed by Committee D02.B0.02, ASTM BOS Volume 05.03.
  • D6683 - Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress has been revised to D6683-14 developed by Committee D18.24, ASTM BOS Volume 04.09.
  • D6703 - Standard Test Method for Automated Heithaus Titrimetry has been revised to D6703-14 developed by Committee D04.47, ASTM BOS Volume 04.03.
  • D6709 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine) has been revised to D6709-14 developed by Committee D02.B0.01, ASTM BOS Volume 05.03.
  • D6750 - Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4?% Fuel Sulfur) and 1N Procedure (0.04?% Fuel Sulfur) has been revised to D6750-14 developed by Committee D02.B0.02, ASTM BOS Volume 05.03.
  • D6760 - Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing has been revised to D6760-14 developed by Committee D18.11, ASTM BOS Volume 04.09.
  • D6790/D6790M - Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores has been revised (with designation change) to D6790/D6790M-14 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • D6794 - Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6?h) Heating Time has been revised to D6794-14 developed by Committee D02.B0, ASTM BOS Volume 05.03.
  • D6818 - Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products has been revised to D6818-14 developed by Committee D35.05, ASTM BOS Volume 04.13.
  • D6891 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine has been revised to D6891-14 developed by Committee D02.B0, ASTM BOS Volume 05.03.
  • D6923 - Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure has been revised to D6923-14 developed by Committee D02.B0, ASTM BOS Volume 05.03.
  • D6984 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine has been revised to D6984-14 developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
  • D7012 - Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures has been revised to D7012-14 developed by Committee D18.12, ASTM BOS Volume 04.09.
  • D7033 - Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels has been revised to D7033-14 developed by Committee D07.03, ASTM BOS Volume 04.10.
  • D7042 - Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) has been revised to D7042-14 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7050 - Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties has been reapproved, available as D7050-04(2014) developed by Committee D11.22, ASTM BOS Volume 09.01.
  • D7067 - Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane (Withdrawn 2014) has been withdrawn, with no replacement. D7067- developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D7111 - Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) has been revised to D7111-14 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7170 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method has been revised to D7170-14 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D7173 - Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt has been revised to D7173-14 developed by Committee D04.47, ASTM BOS Volume 04.03.
  • D7202 - Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection has been editorially changed, available as D7202-14e1 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D7279 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer has been revised to D7279-14 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7321 - Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration has been revised to D7321-14 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7346 - Standard Test Method for No Flow Point and Pour Point of Petroleum Products has been revised to D7346-14 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7367 - Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting has been revised to D7367-14 developed by Committee D18.25, ASTM BOS Volume 04.09.
  • D7422 - Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine has been revised to D7422-14 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7430 - Standard Practice for Mechanical Sampling of Coal has been revised to D7430-14 developed by Committee D05.23, ASTM BOS Volume 05.06.
  • D7439 - Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry has been revised to D7439-14 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D7454 - Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus has been revised to D7454-14 developed by Committee D02.05, ASTM BOS Volume 05.04.
  • D7458 - Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection has been revised to D7458-14 developed by Committee D18.01, ASTM BOS Volume 04.09.
  • D7463 - Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water has been revised to D7463-14a developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7493 - Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gamm
  • D7547 - Standard Specification for Hydrocarbon Unleaded Aviation Gasoline has been revised to D7547-14a developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7549 - Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure has been revised to D7549-14 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7566 - Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons has been revised to D7566-14a developed by Committee D02.J0.06, ASTM BOS Volume 05.04.
  • D7589 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine has been revised to D7589-14 developed by Committee D02.B0.10, ASTM BOS Volume 05.04.
  • D7592 - Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel has been revised to D7592-14 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7596 - Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester has been revised to D7596-14 developed by Committee D02.96, ASTM BOS Volume 05.04.
  • D7621 - Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction has been revised to D7621-14 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7639 - Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence has been reapproved, available as D7639-10(2014) developed by Committee D01.53, ASTM BOS Volume 06.02.
  • D7668 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method has been revised to D7668-14a developed by Committee D02.01.0C, ASTM BOS Volume 05.05.
  • D7674 - Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White has been revised to D7674-14 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D7702/D7702M - Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics has been revised to D7702/D7702M-14 developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D7708 - Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks has been revised to D7708-14 developed by Committee D05.28, ASTM BOS Volume 05.06.
  • D7719 - Standard Specification for High-Octane Unleaded Fuel has been revised to D7719-14a developed by Committee D02.J0, ASTM BOS Volume 05.04.
  • D7759/D7759M - Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration has been revised (with designation change) to D7759/D7759M-14 developed by Committee D18.08, ASTM BOS Volume 04.09.
  • D7781 - Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase is a new standard, now available. D7781-14 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D7833 - Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography has been revised to D7833-14 developed by Committee D03.07, ASTM BOS Volume 05.06.
  • D7849 - Standard Classification for Nomenclature of Reference Materials of Committee D24 is a new standard, now available. D7849-14 developed by Committee D24.41, ASTM BOS Volume 09.01.
  • D7873 - Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120?°C Without the Inclusion of Water (Dry TOST Method) has been editorially changed, available as D7873-13e1 developed by Committee D02.09.0C, ASTM BOS Volume 05.04.
  • D7896 - Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method is a new standard, now available. D7896-14 developed by Committee D15.22, ASTM BOS Volume 15.05.
  • D7901 - Standard Specification for Dimethyl Ether for Fuel Purposes has been revised to D7901-14a developed by Committee D02.H0, ASTM BOS Volume 05.04.
  • D7910 - Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift is a new standard, now available. D7910-14 developed by Committee D22.08, ASTM BOS Volume 11.07.
  • D7915 - Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set is a new standard, now available. D7915-14 developed by Committee D02.94, ASTM BOS Volume 05.04.
  • D7919 - Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes is a new standard, now available. D7919-14 developed by Committee D02.96.06, ASTM BOS Volume 05.04.
  • D7940 - Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy is a new standard, now available. D7940-14 developed by Committee D03.12, ASTM BOS Volume 05.06.
  • D7941/D7941M - Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer is a new standard, now available. D7941/D7941M-14 developed by Committee D03.14, ASTM BOS Volume 05.06.
  • E177 - Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods has been revised to E177-14 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E213 - Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing has been revised to E213-14 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E250 - Standard Practice for Use of CODEN (Withdrawn 2014) has been withdrawn, with no replacement. E250- developed by Committee E13.91, ASTM BOS Volume 03.06.
  • E329 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection has been revised to E329-14a developed by Committee E36.70, ASTM BOS Volume 04.02.
  • E346 - Standard Test Methods for Analysis of Methanol has been editorially changed, available as E346-08e1 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E355 - Standard Practice for Gas Chromatography Terms and Relationships has been reapproved, available as E355-96(2014) developed by Committee E13.19, ASTM BOS Volume 03.06.
  • E479 - Standard Guide for Preparation of a Leak Testing Specification (Withdrawn 2014) has been withdrawn, with no replacement. E479- developed by Committee E07.08, ASTM BOS Volume 03.03.
  • E535 - Standard Practice for Preparation of Fire-Test-Response Standards has been revised to E535-14 developed by Committee E05.31, ASTM BOS Volume 04.07.
  • E545 - Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination has been revised to E545-14 developed by Committee E07.05, ASTM BOS Volume 03.03.
  • E566 - Standard Practice for Electromagnetic (Eddy Current) Sorting of Ferrous Metals has been revised to E566-14 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E647 - Standard Test Method for Measurement of Fatigue Crack Growth Rates has been editorially changed, available as E647-13ae1 developed by Committee E08.06, ASTM BOS Volume 03.01.
  • E691 - Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method has been revised to E691-14 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E703 - Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals has been revised to E703-14 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E746 - Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems has been reapproved, available as E746-07(2014) developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E826 - Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry has been revised to E826-14 developed by Committee E01.22, ASTM BOS Volume 03.05.
  • E860 - Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation has been editorially changed, available as E860-07(2013)e1 developed by Committee E30.11, ASTM BOS Volume 14.02.
  • E925 - Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm has been reapproved, available as E925-09(2014) developed by Committee E13.01, ASTM BOS Volume 03.06.
  • E929 - Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment (Withdrawn 2014) has been withdrawn, with no replacement. E929- developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E977 - Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials has been reapproved, available as E977-05(2014) developed by Committee E07.10, ASTM BOS Volume 03.03.
  • E1020 - Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation has been editorially changed, available as E1020-13e1 developed by Committee E30.11, ASTM BOS Volume 14.02.
  • E1142 - Standard Terminology Relating to Thermophysical Properties has been revised to E1142-14a developed by Committee E37.03, ASTM BOS Volume 14.02.
  • E1155 - Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers has been revised to E1155-14 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E1155M - Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric) has been revised to E1155M-14 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E1158 - Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material has been revised to E1158-14 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E1161 - Standard Practice for Radiologic Examination of Semiconductors and Electronic Components has been reapproved, available as E1161-09(2014) developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1169 - Standard Practice for Conducting Ruggedness Tests has been revised to E1169-14 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E1316 - Standard Terminology for Nondestructive Examinations has been revised to E1316-14 developed by Committee E07.92, ASTM BOS Volume 03.03.
  • E1354 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter has been revised to E1354-14 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E1476 - Standard Guide for Metals Identification, Grade Verification, and Sorting has been reapproved, available as E1476-04(2014) developed by Committee E07.10, ASTM BOS Volume 03.03.
  • E1481 - Standard Terminology of Railing Systems and Rails for Buildings has been editorially changed, available as E1481-00A(2014)e1 developed by Committee E06.56, ASTM BOS Volume 04.11.
  • E1503 - Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System has been revised to E1503-14 developed by Committee E33.09, ASTM BOS Volume 04.06.
  • E1618 - Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry has been revised to E1618-14 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E1683 - Standard Practice for Testing the Performance of Scanning Raman Spectrometers has been editorially changed, available as E1683-02(2014)e1 developed by Committee E13.08, ASTM BOS Volume 03.06.
  • E1708 - Standard Practice for Electronic Interchange of Color and Appearance Data has been revised to E1708-14 developed by Committee E12.04, ASTM BOS Volume 06.01.
  • E1735 - Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV has been reapproved, available as E1735-07(2014) developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1791 - Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry has been reapproved, available as E1791-96(2014) developed by Committee E13.03, ASTM BOS Volume 03.06.
  • E1814 - Standard Practice for Computed Tomographic (CT) Examination of Castings has been revised to E1814-14 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1817 - Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) has been reapproved, available as E1817-08(2014) developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1840 - Standard Guide for Raman Shift Standards for Spectrometer Calibration has been reapproved, available as E1840-96(2014) developed by Committee E13.08, ASTM BOS Volume 03.06.
  • E1877 - Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data has been revised to E1877-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E1934 - Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography has been reapproved, available as E1934-99a(2014) developed by Committee E07.10, ASTM BOS Volume 03.03.
  • E1996 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes has been revised to E1996-14 developed by Committee E06.51, ASTM BOS Volume 04.11.
  • E2064 - Standard Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) has been reapproved, available as E2064-00(2014) developed by Committee E52.04, ASTM BOS Volume 14.02.
  • E2099 - Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems has been editorially changed, available as E2099-00(2014)e1 developed by Committee E06.55, ASTM BOS Volume 04.11.
  • E2102 - Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater has been revised to E2102-14 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E2107 - Standard Practice for Environmental Regulatory Compliance Audits has been reapproved, available as E2107-06(2014) developed by Committee E50.05, ASTM BOS Volume 11.05.
  • E2163 - Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs has been reapproved, available as E2163-06(2014) developed by Committee E52.04, ASTM BOS Volume 14.02.
  • E2174 - Standard Practice for On-Site Inspection of Installed Firestops has been revised to E2174-14 developed by Committee E06.21, ASTM BOS Volume 04.12.
  • E2218 - Standard Test Method for Determining Forming Limit Curves has been revised to E2218-14 developed by Committee E28.02, ASTM BOS Volume 03.01.
  • E2529 - Standard Guide for Testing the Resolution of a Raman Spectrometer has been reapproved, available as E2529-06(2014) developed by Committee E13.08, ASTM BOS Volume 03.06.
  • E2542 - Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations has been reapproved, available as E2542-08(2014) developed by Committee E54.03, ASTM BOS Volume 15.08.
  • E2543 - Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters has been reapproved, available as E2543-08(2014) developed by Committee E54.03, ASTM BOS Volume 15.08.
  • E2594 - Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) has been reapproved, available as E2594-09(2014) developed by Committee E01.08, ASTM BOS Volume 03.05.
  • E2608 - Standard Practice for Equipment Control Matrix (ECM) has been reapproved, available as E2608-08(2014) developed by Committee E53.05, ASTM BOS Volume 04.12.
  • E2613 - Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults has been revised to E2613-14 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2675 - Standard Practice for Property Management System Outcomes has been reapproved, available as E2675-09(2014) developed by Committee E53.05, ASTM BOS Volume 04.12.
  • E2676 - Standard Practice for Tangible Property Mobility Index (MI) has been reapproved, available as E2676-09(2014) developed by Committee E53.05, ASTM BOS Volume 04.12.
  • E2682 - Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses has been reapproved, available as E2682-09(2014) developed by Committee E31.15, ASTM BOS Volume 14.01.
  • E2719 - Standard Guide for Fluorescence—Instrument Calibration and Qualification has been reapproved, available as E2719-09(2014) developed by Committee E13.01, ASTM BOS Volume 03.06.
  • E2762 - Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL has been reapproved, available as E2762-10(2014) developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2777 - Standard Guide for Vegetative (Green) Roof Systems is a new standard, now available. E2777-14 developed by Committee E60.01, ASTM BOS Volume 04.12.
  • E2810 - Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units has been editorially changed, available as E2810-11e2 developed by Committee E55.03, ASTM BOS Volume 14.02.
  • E2847 - Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers has been revised to E2847-14 developed by Committee E20.02, ASTM BOS Volume 14.03.
  • E2867 - Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry has been revised to E2867-14 developed by Committee E12.04, ASTM BOS Volume 06.01.
  • E2884 - Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays has been editorially changed, available as E2934-99a(2014) developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E2886/E2886M - Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement is a new standard, now available. E2886/E2886M-14 developed by Committee E05.14, ASTM BOS Volume 04.07.
  • E2893 - Standard Guide for Greener Cleanups has been editorially changed, available as E2893-13e1 developed by Committee E50.04, ASTM BOS Volume 11.05.
  • E2898 - Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications has been revised to E2898-14 developed by Committee E55.01, ASTM BOS Volume 14.02.
  • E2913 - Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples is a new standard, now available. E2913-14 developed by Committee E06.23, ASTM BOS Volume 04.12.
  • E2914 - Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples is a new standard, now available. E2914-14 developed by Committee E06.23, ASTM BOS Volume 04.12.
  • E2923 - Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry has been revised to E2923-14 developed by Committee E06.21, ASTM BOS Volume 04.12.
  • E2924 - Standard Practice for Intumescent Coatings is a new standard, now available. E2924-14 developed by Committee E06.21, ASTM BOS Volume 04.12.
  • E2925 - Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function is a new standard, now available. E2925-14 developed by Committee E06.55, ASTM BOS Volume 04.12.
  • E2948 - Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire is a new standard, now available. E2948-14 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2950 - Standard Specification for Metal Canopy Systems is a new standard, now available. E2950-14 developed by Committee E54.05, ASTM BOS Volume 15.08.
  • E2958 - Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry is a new standard, now available. E2958-14 developed by Committee E37.01, ASTM BOS Volume 14.02.
  • E2962 - Standard Guide for Fleet Management is a new standard, now available. E2962-14 developed by Committee E53.08, ASTM BOS Volume 04.12.
  • E2966 - Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet is a new standard, now available. E2966-14 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2971 - Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements is a new standard, now available. E2971-14 developed by Committee E07.05, ASTM BOS Volume 03.03.
  • F269 - Standard Test Method for Sag of Tungsten Wire has been reapproved, available as F269-60(2014) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F288 - Standard Specification for Tungsten Wire for Electron Devices and Lamps has been reapproved, available as F288-96(2014) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F289 - Standard Specification for Molybdenum Wire and Rod for Electronic Applications has been reapproved, available as F289-96(2014) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F364 - Standard Specification for Molybdenum Flattened Wire for Electron Tubes? has been reapproved, available as F364-96(2014) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F381 - Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines has been revised to F381-14 developed by Committee F08.17, ASTM BOS Volume 15.07.
  • F467 - Standard Specification for Nonferrous Nuts for General Use has been editorially changed, available as F467-13e2 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F510/F510M - Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method has been revised to F510/F510M-14 developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F588 - Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact has been revised to F588-14 developed by Committee E06.51, ASTM BOS Volume 04.12.
  • F778 - Standard Methods for Gas Flow Resistance Testing of Filtration Media has been reapproved, available as F778-88(2014) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • F842 - Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact has been revised to F842-14 developed by Committee E06.51, ASTM BOS Volume 04.12.
  • F853 - Standard Practice for Maintenance Procedures for Amusement Rides and Devices (Withdrawn 2014) has been withdrawn, with no replacement. F853-05 developed by Committee F24.30, ASTM BOS Volume 15.07.
  • F913 - Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe has been reapproved, available as F913-02(2014) developed by Committee F17.20, ASTM BOS Volume 08.04.
  • F1063 - Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems has been reapproved, available as F1063-09(2014) developed by Committee F27.50, ASTM BOS Volume 15.07.
  • F1220 - Standard Guide for Emergency Medical Services System (EMSS) Telecommunications has been reapproved, available as F1220-95(2014) developed by Committee F30.04, ASTM BOS Volume 13.02.
  • F1221 - Standard Guide for Interagency Information Exchange has been reapproved, available as F1221-89(2014) developed by Committee F30.04, ASTM BOS Volume 13.02.
  • F1223 - Standard Test Method for Determination of Total Knee Replacement Constraint has been revised to F1223-14 developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F1235 - Standard Consumer Safety Specification for Portable Hook-On Chairs has been revised to F1235-14 developed by Committee F15.16, ASTM BOS Volume 15.11.
  • F1258 - Standard Practice for Emergency Medical Dispatch has been reapproved, available as F1258-95(2014) developed by Committee F30.04, ASTM BOS Volume 13.02.
  • F1262M - Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric) has been revised to F1262M-14 developed by Committee F01.11, ASTM BOS Volume 10.04.
  • F1303 - Standard Specification for Sheet Vinyl Floor Covering with Backing has been reapproved, available as F1303-04(2014) developed by Committee F06.80, ASTM BOS Volume 15.04.
  • F1307 - Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor has been revised to F1307-14 developed by Committee F02.10, ASTM BOS Volume 15.10.
  • F1321 - Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel has been revised to F1321-14 developed by Committee F25.01, ASTM BOS Volume 01.07.
  • F1355 - Standard Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment has been reapproved, available as F1355-06(2014) developed by Committee E61.05, ASTM BOS Volume 12.02.
  • F1504 - Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation has been revised to F1504-14 developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F1560 - Standard Practice for Emergency Medical Dispatch Management has been reapproved, available as F1560-00(2014) developed by Committee F30.04, ASTM BOS Volume 13.02.
  • F1578 - Standard Test Method for Contact Closure Cycling of a Membrane Switch has been reapproved, available as F1578-07(2014) developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1598 - Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method) has been reapproved, available as F1598-95(2014) developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1670/F1670M - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood has been reapproved (with editorial change), available as F1670/F1670M-08(2014)e1 developed by Committee F23.40, ASTM BOS Volume 11.03.
  • F1680 - Standard Test Method for Determining Circuit Resistance of a Membrane Switch has been reapproved, available as F1680-07a(2014) developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1887 - Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs has been revised to F1887-14 developed by Committee F08.26, ASTM BOS Volume 15.07.
  • F1927 - Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector has been revised to F1927-14 developed by Committee F02.10, ASTM BOS Volume 15.10.
  • F1951 - Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment has been revised to F1951-14 developed by Committee F08.63, ASTM BOS Volume 15.07.
  • F2076 - Standard Practice for Communicating an EMS Patient Report to Receiving Medical Facilities has been reapproved, available as F2076-01(2014) developed by Committee F30.04, ASTM BOS Volume 13.02.
  • F2080 - Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe has been editorially changed, available as F2080-12e1 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F2097 - Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products has been revised to F2097-14 developed by Committee F02.50, ASTM BOS Volume 15.10.
  • F2199 - Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat has been reapproved, available as F2199-09(2014) developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F2219 - Standard Test Methods for Measuring High-Speed Bat Performance has been revised to F2219-14 developed by Committee F08.26, ASTM BOS Volume 15.07.
  • F2264 - Standard Consumer Safety Specification for Non-Powered Scooters has been revised to F2264-14 developed by Committee F15.52, ASTM BOS Volume 15.11.
  • F2291 - Standard Practice for Design of Amusement Rides and Devices has been revised to F2291-14 developed by Committee F24.24, ASTM BOS Volume 15.07.
  • F2376 - Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems has been revised to F2376-13 developed by Committee F24.70, ASTM BOS Volume 15.07.
  • F2437 - Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs has been revised to F2437-14 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F2528 - Standard Test Methods for Enteral Feeding Devices with a Retention Balloon has been reapproved, available as F2528-06(2014) developed by Committee F04.35, ASTM BOS Volume 13.02.
  • F2635 - Standard Classification for Unmanned Aircraft Pilot Certification (Withdrawn 2014) has been withdrawn, with no replacement. F2635-07 developed by Committee F38.03, ASTM BOS Volume 15.11.
  • F2636 - Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned Aircraft Single-Engine Land (SEL) Remote Control and Autonomous/Semiautonomous (Withdrawn 2014) has been withdrawn, with no replacement. F2636-08 developed by Committee F38.03, ASTM BOS Volume 15.11.
  • F2654 - Standard Specification for Low Energy Air Gun (LEAG) Warnings has been revised to F2654-14 developed by Committee F08.27, ASTM BOS Volume 15.07.
  • F2667 - Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Unmanned Aircraft Systems (Withdrawn 2014) has been withdrawn, with no replacement. F2667-07 developed by Committee F38.01, ASTM BOS Volume 15.11.
  • F2685 - Standard Guide for Training of a Land Search Team Leader (STL) has been revised (with title change) to F2685-14 developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F2689 - Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Unmanned Aircraft Systems (Withdrawn 2014) has been withdrawn, with no replacement. F2689-08 developed by Committee F38.01, ASTM BOS Volume 15.11.
  • F2690 - Standard Guide for Suggested Procedures for Applying for a Flight Authority for an Unmanned Aircraft System: Part I and Part II (Withdrawn 2014) has been withdrawn, with no replacement. F2690-08 developed by Committee F38.01, ASTM BOS Volume 15.11.
  • F2696 - Standard Practice for Inspection of Aircraft Electrical Wiring Systems has been revised (with title change) to F2696-14 developed by Committee F39.02, ASTM BOS Volume 15.11.
  • F2717 - Standard Guide for Development of an Independent Third-Party Verification of Reference Materials has been revised (with title change) to F2717-14 developed by Committee F10.20, ASTM BOS Volume 15.12.
  • F2748 - Standard Specification for Low Energy Air Guns has been revised (with title change) to F2748-14 developed by Committee F08.27, ASTM BOS Volume 15.07.
  • F2764/F2764M - Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications has been editorially changed, available as F2764/F2764M-11ae2 developed by Committee F17.62, ASTM BOS Volume 08.04.
  • F2780 - Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers has been reapproved, available as F2780-09(2014) developed by Committee F14.50, ASTM BOS Volume 01.06.
  • F2783 - Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada is a new standard, now available. F2783-14 developed by Committee F24.80, ASTM BOS Volume 15.07.
  • F2799 - Standard Practice for Maintenance of Aircraft Electrical Wiring Systems has been revised (with title change) to F2799-14 developed by Committee F39.02, ASTM BOS Volume 15.11.
  • F2815 - Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program has been reapproved, available as F2815-10(2014) developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F2880 - Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in. has been revised to F2880-14 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F2943 - Standard Guide for Presentation of End User Labeling Information for Musculoskeletal Implants has been revised (with title change) to F2943-14 developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F2950 - Standard Safety and Performance Specification for Soccer Goals is a new standard, now available. F2950-14 developed by Committee F15.43, ASTM BOS Volume 15.11.
  • F2959 - Standard Practice for Special Requirements for Aerial Adventure Courses has been revised to F2959-14 developed by Committee F24.60, ASTM BOS Volume 15.07.
  • F2968/F2968M - Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications is a new standard, now available. F2968/F2968M-14 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F3002 - Standard Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS) has been revised to F3002-14a developed by Committee F38.01, ASTM BOS Volume 15.11.
  • F3005 - Standard Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS) has been revised to F3005-14a developed by Committee F38.01, ASTM BOS Volume 15.11.
  • F3044 - Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants is a new standard, now available. F3044-14 developed by Committee F04.15, ASTM BOS Volume 13.02.
  • F3049 - Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes is a new standard, now available. F3049-14 developed by Committee F42.05, ASTM BOS Volume 10.04.
  • F3068 - Standard Guide for Contents and Use of a Position Task Book (PTB) is a new standard, now available. F3068-14 developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F3084 - Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers is a new standard, now available. F3084-14 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F3088 - Standard Test Method for Use of a Centrifugation Method to Quantify/Study Cell-Material Adhesive Interactions is a new standard, now available. F3088-14 developed by Committee F04.43, ASTM BOS Volume 13.02.
  • F3089 - Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions is a new standard, now available. F3089-14 developed by Committee F04.42, ASTM BOS Volume 13.02.
  • F3091/F3091M - Standard Specification for Powder Bed Fusion of Plastic Materials is a new standard, now available. F3091/F3091M-14 developed by Committee F42.05, ASTM BOS Volume 10.04.

Published in international.