ASTM standards

Set out below are recent publications from ASTM International. To purchase ASTM standards in hard copy or PDF format, please call 0800 782 632 during business hours or email enquiries@standards.co.nz.

•        A29/A29M - Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought has been editorially changed, available as A29/A29M-12e1 developed by Committee A01.15, ASTM BOS Volume 01.05.

•        A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process has been revised to A653/A653M-13 developed by Committee A05.11, ASTM BOS Volume 01.06.

•        A700 - Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment (Withdrawn 2014) has been withdrawn, with no replacement. A700-05 developed by Committee A01.94, ASTM BOS Volume 01.05.

•        A761/A761M - Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches Editorial Review Board change A761/A761M-13b developed by Committee A05.17, ASTM BOS Volume 01.06.

•        A890/A890M - Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application has been revised to A890/A890M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.

•        A929/A929M - Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe has been reapproved, available as A929/A929M-01(2013) developed by Committee A05.11, ASTM BOS Volume 01.06.

•        A995/A995M - Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts has been revised to A995/A995M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.

•        A1073/A1073M - Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet has been revised to A1073/A1073M-14 developed by Committee A05.07, ASTM BOS Volume 01.06.

•        A1079 - Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process has been editorially changed, available as A1079-13e2 developed by Committee A05.11, ASTM BOS Volume 01.06.

•        A1087/A1087M - Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet is a new standard, now available. A1087/A1087M-13 developed by Committee A05.07, ASTM BOS Volume 01.06.

•        B90/B90M - Standard Specification for Magnesium-Alloy Sheet and Plate has been revised to B90/B90M-13 developed by Committee B07.04, ASTM BOS Volume 02.02.

•        B107/B107M - Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire has been revised to B107/B107M-13 developed by Committee B07.04, ASTM BOS Volume 02.02.

•        B243 - Standard Terminology of Powder Metallurgy has been revised to B243-13 developed by Committee B09.01, ASTM BOS Volume 02.05.

•        B275 - Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought has been revised to B275-13 developed by Committee B02.04, ASTM BOS Volume 02.04.

•        B281 - Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings has been reapproved, available as B281-88(2013) developed by Committee B08.02, ASTM BOS Volume 02.05.

•        B320 - Standard Practice for Preparation of Iron Castings for Electroplating has been reapproved, available as B320-60(2013) developed by Committee B08.02, ASTM BOS Volume 02.05.

•        B380 - Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure has been reapproved, available as B380-97(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B481 - Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating has been reapproved, available as B481-68(2013) developed by Committee B08.02, ASTM BOS Volume 02.05.

•        B482 - Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating has been reapproved, available as B482-85(2013) developed by Committee B08.02, ASTM BOS Volume 02.05.

•        B487 - Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section has been reapproved, available as B487-85(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B489 - Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals has been reapproved, available as B489-85(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B533 - Standard Test Method for Peel Strength of Metal Electroplated Plastics has been reapproved, available as B533-85(2013) developed by Committee B08.05, ASTM BOS Volume 02.05.

•        B537 - Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure has been reapproved, available as B537-70(2013) developed by Committee B08.05, ASTM BOS Volume 02.05.

•        B555 - Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test has been reapproved, available as B555-86(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B556 - Standard Guide for Measurement of Thin Chromium Coatings by Spot Test has been reapproved, available as B556-90(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B558 - Standard Practice for Preparation of Nickel Alloys for Electroplating has been reapproved, available as B558-79(2013) developed by Committee B08.02, ASTM BOS Volume 02.05.

•        B571 - Standard Practice for Qualitative Adhesion Testing of Metallic Coatings has been reapproved, available as B571-97(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B611 - Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials has been revised to B611-13 developed by Committee G02.30, ASTM BOS Volume 03.02.

•        B629 - Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating has been reapproved, available as B629-77(2013) developed by Committee B08.02, ASTM BOS Volume 02.05.

•        B650 - Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates has been reapproved, available as B650-95(2013) developed by Committee B08.03, ASTM BOS Volume 02.05.

•        B689 - Standard Specification for Electroplated Engineering Nickel Coatings has been reapproved, available as B689-97(2013) developed by Committee B08.03, ASTM BOS Volume 02.05.

•        B734 - Standard Specification for Electrodeposited Copper for Engineering Uses has been reapproved, available as B734-97(2013) developed by Committee B08.03, ASTM BOS Volume 02.05.

•        B765 - Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings has been reapproved, available as B765-03(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B809 - Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”) has been reapproved, available as B809-95(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B832 - Standard Guide for Electroforming with Nickel and Copper has been reapproved, available as B832-93(2013) developed by Committee B08.03, ASTM BOS Volume 02.05.

•        B866 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion has been reapproved, available as B866-95(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        B867 - Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use has been reapproved, available as B867-95(2013) developed by Committee B08.03, ASTM BOS Volume 02.05.

•        B874 - Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process has been reapproved, available as B874-96(2013) developed by Committee B08.03, ASTM BOS Volume 02.05.

•        B875 - Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process has been reapproved, available as B875-96(2013) developed by Committee B08.03, ASTM BOS Volume 02.05.

•        B877 - Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method has been reapproved, available as B877-96(2013) developed by Committee B08.10, ASTM BOS Volume 02.05.

•        C12 - Standard Practice for Installing Vitrified Clay Pipe Lines has been revised to C12-13a developed by Committee C04.20, ASTM BOS Volume 04.05.

•        C34 - Standard Specification for Structural Clay Load-Bearing Wall Tile has been revised to C34-13 developed by Committee C15.02, ASTM BOS Volume 04.05.

•        C56 - Standard Specification for Structural Clay Nonloadbearing Tile has been revised to C56-13 developed by Committee C15.02, ASTM BOS Volume 04.05.

•        C62 - Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) has been revised to C62-13a developed by Committee C15.02, ASTM BOS Volume 04.05.

•        C67 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile has been revised to C67-13a developed by Committee C15.02, ASTM BOS Volume 04.05.

•        C94/C94M - Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-13b developed by Committee C09.40, ASTM BOS Volume 04.02.

•        C191 - Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle has been revised to C191-13 developed by Committee C01.30, ASTM BOS Volume 04.01.

•        C302 - Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation has been revised to C302-13 developed by Committee C16.32, ASTM BOS Volume 04.06.

•        C330/C330M - Standard Specification for Lightweight Aggregates for Structural Concrete has been revised to C330/C330M-13 developed by Committee C09.21, ASTM BOS Volume 04.02.

•        C359 - Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method) has been revised to C359-13 developed by Committee C01.30, ASTM BOS Volume 04.01.

•        C425 - Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings has been reapproved, available as C425-04(2013) developed by Committee C04.20, ASTM BOS Volume 04.05.

•        C451 - Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method) has been revised to C451-13 developed by Committee C01.30, ASTM BOS Volume 04.01.

•        C471M - Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) has been revised to C471M-13 developed by Committee C11.01, ASTM BOS Volume 04.01.

•        C479 - Standard Specification for Vitrified Clay Liner Plates has been reapproved, available as C479-04(2013) developed by Committee C04.20, ASTM BOS Volume 04.05.

•        C511 - Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes has been revised to C511-13 developed by Committee C01.95, ASTM BOS Volume 04.01.

•        C515 - Standard Specification for Chemical-Resistant Ceramic Tower Packings has been revised to C515-13 developed by Committee D32.02, ASTM BOS Volume 05.05.

•        C530 - Standard Specification for Structural Clay Nonloadbearing Screen Tile has been revised to C530-13 developed by Committee C15.02, ASTM BOS Volume 04.05.

•        C553 - Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications has been revised to C553-13 developed by Committee C16.23, ASTM BOS Volume 04.06.

•        C578 - Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation has been revised to C578-13 developed by Committee C16.22, ASTM BOS Volume 04.06.

•        C592 - Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) has been revised to C592-13 developed by Committee C16.23, ASTM BOS Volume 04.06.

•        C602 - Standard Specification for Agricultural Liming Materials has been revised to C602-13a developed by Committee C07.02, ASTM BOS Volume 04.01.

•        C633 - Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings has been revised to C633-13 developed by Committee B08.12, ASTM BOS Volume 02.05.

•        C634 - Standard Terminology Relating to Building and Environmental Acoustics has been revised to C634-13 developed by Committee E33.07, ASTM BOS Volume 04.06.

•        C635/C635M - Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings has been revised to C635/C635M-13a developed by Committee E33.04, ASTM BOS Volume 04.06.

•        C706 - Standard Specification for Limestone for Animal Feed Use has been revised to C706-13 developed by Committee C07.02, ASTM BOS Volume 04.01.

•        C805/C805M - Standard Test Method for Rebound Number of Hardened Concrete has been revised to C805/C805M-13a developed by Committee C09.64, ASTM BOS Volume 04.02.

•        C856 - Standard Practice for Petrographic Examination of Hardened Concrete has been revised to C856-13 developed by Committee C09.65, ASTM BOS Volume 04.02.

•        C879 - Standard Test Methods for Release Papers Used with Preformed Tape Sealants has been reapproved, available as C879-03(2014) developed by Committee C24.20, ASTM BOS Volume 04.07.

•        C881/C881M - Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete has been revised to C881/C881M-13 developed by Committee C09.25, ASTM BOS Volume 04.02.

•        C882/C882M - Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear has been revised to C882/C882M-13a developed by Committee C09.25, ASTM BOS Volume 04.02.

•        C896 - Standard Terminology Relating to Clay Products has been revised to C896-13 developed by Committee C04.10, ASTM BOS Volume 04.05.

•        C900 - Standard Test Method for Pullout Strength of Hardened Concrete has been revised to C900-13a developed by Committee C09.64, ASTM BOS Volume 04.02.

•        C918/C918M - Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength has been revised to C918/C918M-13 developed by Committee C09.61, ASTM BOS Volume 04.02.

•        C924 - Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Withdrawn 2013) has been withdrawn, with no replacement. C924-02(1909) developed by Committee C13.09, ASTM BOS Volume 04.05.

•        C924M - Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) (Withdrawn 2013) has been withdrawn, with no replacement. C924M-02(1909) developed by Committee C13.09, ASTM BOS Volume 04.05.

•        C1040/C1040M - Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods has been reapproved, available as C1040/C1040M-08(2013) developed by Committee C09.45, ASTM BOS Volume 04.02.

•        C1045 - Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions has been reapproved, available as C1045-07(2013) developed by Committee C16.30, ASTM BOS Volume 04.06.

•        C1091 - Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines has been reapproved, available as C1091-03a(2013) developed by Committee C04.20, ASTM BOS Volume 04.05.

•        C1104/C1104M - Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation has been revised to C1104/C1104M-13a developed by Committee C16.33, ASTM BOS Volume 04.06.

•        C1114 - Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus has been reapproved, available as C1114-06(2013) developed by Committee C16.30, ASTM BOS Volume 04.06.

•        C1126 - Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation has been revised to C1126-13a developed by Committee C16.22, ASTM BOS Volume 04.06.

•        C1214 - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method has been revised to C1214-13 developed by Committee C13.09, ASTM BOS Volume 04.05.

•        C1214M - Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric) has been revised to C1214M-13 developed by Committee C13.09, ASTM BOS Volume 04.05.

•        C1258 - Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation has been reapproved, available as C1258-08(2013) developed by Committee C16.33, ASTM BOS Volume 04.06.

•        C1261 - Standard Specification for Firebox Brick for Residential Fireplaces has been revised to C1261-13 developed by Committee C15.02, ASTM BOS Volume 04.05.

•        C1280 - Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing has been revised to C1280-13a developed by Committee C11.03, ASTM BOS Volume 04.01.

•        C1304 - Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials has been reapproved, available as C1304-08(2013) developed by Committee C16.31, ASTM BOS Volume 04.06.

•        C1438 - Standard Specification for Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar has been revised to C1438-13 developed by Committee C09.44, ASTM BOS Volume 04.02.

•        C1491 - Standard Specification for Concrete Roof Pavers has been revised to C1491-13 developed by Committee C15.03, ASTM BOS Volume 04.05.

•        C1528 - Standard Guide for Selection of Dimension Stone has been revised to C1528-13 developed by Committee C18.08, ASTM BOS Volume 04.07.

•        C1568 - Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method) has been reapproved, available as C1568-08(2013) developed by Committee C15.06, ASTM BOS Volume 04.05.

•        C1618 - Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure has been revised to C1618-13 developed by Committee C13.09, ASTM BOS Volume 04.05.

•        C1618M - Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric) has been revised to C1618M-13 developed by Committee C13.09, ASTM BOS Volume 04.05.

•        C1696 - Standard Guide for Industrial Thermal Insulation Systems has been revised to C1696-13b developed by Committee C16.40, ASTM BOS Volume 04.06.

•        C1714/C1714M - Standard Specification for Preblended Dry Mortar Mix for Unit Masonry has been revised to C1714/C1714M-13a developed by Committee C12.03, ASTM BOS Volume 04.05.

•        C1784 - Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products is a new standard, now available. C1784-13 developed by Committee C16.30, ASTM BOS Volume 04.06.

•        C1785 - Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing is a new standard, now available. C1785-13 developed by Committee C16.33, ASTM BOS Volume 04.06.

•        C1789 - Standard Test Method for Use and Calibration of Hand-Held Moisture Meters on Gypsum Panels is a new standard, now available. C1789-13 developed by Committee C11.01, ASTM BOS Volume 04.01.

•        D75/D75M - Standard Practice for Sampling Aggregates has been revised to D75/D75M-13 developed by Committee D04.30, ASTM BOS Volume 04.03.

•        D98 - Standard Specification for Calcium Chloride has been reapproved, available as D98-05(2013) developed by Committee D04.31, ASTM BOS Volume 04.03.

•        D176 - Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation (Withdrawn 2013) has been withdrawn, with no replacement. D176- developed by Committee D09.01, ASTM BOS Volume 10.01.

•        D233 - Standard Test Methods of Sampling and Testing Turpentine has been revised to D233-13 developed by Committee D01.34, ASTM BOS Volume 06.03.

•        D283 - Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments has been reinstated as D283-13 developed by Committee D01.31, ASTM BOS Volume 06.03.

•        D350 - Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation has been revised to D350-13 developed by Committee D09.07, ASTM BOS Volume 10.01.

•        D396 - Standard Specification for Fuel Oils has been revised to D396-13c developed by Committee D02.E0, ASTM BOS Volume 05.01.

•        D411 - Standard Test Methods for Shellac Used for Electrical Insulation (Withdrawn 2013) has been withdrawn, with no replacement. D411- developed by Committee D09.01, ASTM BOS Volume 10.01.

•        D449/D449M - Standard Specification for Asphalt Used in Dampproofing and Waterproofing has been reapproved (with editorial change), available as D449/D449M-03(2014)e1 developed by Committee D08.03, ASTM BOS Volume 04.04.

•        D522/D522M - Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings has been revised (with designation change) to D522/D522M-13 developed by Committee D01.23, ASTM BOS Volume 06.01.

•        D613 - Standard Test Method for Cetane Number of Diesel Fuel Oil has been revised to D613-13 developed by Committee D02.01, ASTM BOS Volume 05.05.

•        D784 - Standard Specification for Orange Shellac and Other Indian Lacs for Electrical Insulation (Withdrawn 2013) has been withdrawn, with no replacement. D784- developed by Committee D09.01, ASTM BOS Volume 10.01.

•        D807 - Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method) has been revised to D807-14 developed by Committee D19.03, ASTM BOS Volume 11.01.

•        D876 - Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation has been revised to D876-13 developed by Committee D09.07, ASTM BOS Volume 10.01.

•        D877/D877M - Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes has been revised (with designation change) to D877/D877M-13 developed by Committee D27.05, ASTM BOS Volume 10.03.

•        D975 - Standard Specification for Diesel Fuel Oils has been revised to D975-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.

•        D1003 - Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics has been revised to D1003-13 developed by Committee D20.40, ASTM BOS Volume 08.01.

•        D1389 - Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials (Withdrawn 2014) has been withdrawn, with no replacement. D1389- developed by Committee D09.12, ASTM BOS Volume 10.01.

•        D1458 - Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation has been revised to D1458-13 developed by Committee D09.07, ASTM BOS Volume 10.01.

•        D1474/D1474M - Standard Test Methods for Indentation Hardness of Organic Coatings has been revised (with designation change) to D1474/D1474M-13 developed by Committee D01.23, ASTM BOS Volume 06.01.

•        D1475 - Standard Test Method For Density of Liquid Coatings, Inks, and Related Products has been revised to D1475-13 developed by Committee D01.24, ASTM BOS Volume 06.01.

•        D1527 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) has been withdrawn, with no replacement. D1527- developed by Committee F17.61, ASTM BOS Volume 08.04.

•        D1655 - Standard Specification for Aviation Turbine Fuels has been revised to D1655-13a developed by Committee D02.J0.01, ASTM BOS Volume 05.01.

•        D1742 - Standard Test Method for Oil Separation from Lubricating Grease During Storage has been reapproved, available as D1742-06(2013) developed by Committee D02.G0.03, ASTM BOS Volume 05.01.

•        D1744 - Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent has been reinstated as D1744-13 developed by Committee D02.02, ASTM BOS Volume 05.01.

•        D1752 - Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction has been reapproved, available as D1752-04a(2013) developed by Committee D04.34, ASTM BOS Volume 04.03.

•        D1807 - Standard Test Methods for Refractive Index and Specific Optical Dispersion of Electrical Insulating Liquids (Withdrawn 2014) has been withdrawn, with no replacement. D1807- developed by Committee D27.07, ASTM BOS Volume 10.03.

•        D1868 - Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems has been revised to D1868-13 developed by Committee D09.12, ASTM BOS Volume 10.01.

•        D1929 - Standard Test Method for Determining Ignition Temperature of Plastics has been revised to D1929-13a developed by Committee D20.30, ASTM BOS Volume 08.01.

•        D1970/D1970M - Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection has been revised to D1970/D1970M-13a developed by Committee D08.02, ASTM BOS Volume 04.04.

•        D1982 - Standard Test Method for Titer of Fatty Acids has been revised to D1982-13 developed by Committee D01.34, ASTM BOS Volume 06.03.

•        D2144 - Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption has been reapproved, available as D2144-07(2013) developed by Committee D27.03, ASTM BOS Volume 10.03.

•        D2178/D2178M - Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing has been revised to D2178/D2178M-13a developed by Committee D08.04, ASTM BOS Volume 04.04.

•        D2344/D2344M - Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates has been revised to D2344/D2344M-13 developed by Committee D30.04, ASTM BOS Volume 15.03.

•        D2397/D2397M - Standard Specification for Cationic Emulsified Asphalt has been revised (with designation change) to D2397/D2397M-13 developed by Committee D04.41, ASTM BOS Volume 04.03.

•        D2521/D2521M - Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining has been reapproved (with editorial change), available as D2521/D2521M-76(2014)e1 developed by Committee D08.03, ASTM BOS Volume 04.04.

•        D2633 - Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable has been revised to D2633-13a developed by Committee D09.18, ASTM BOS Volume 10.02.

•        D2639/D2639M - Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer has been revised (with designation change) to D2639/D2639M-13 developed by Committee D05.15, ASTM BOS Volume 05.06.

•        D2668 - Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption has been reapproved, available as D2668-07(2013) developed by Committee D27.03, ASTM BOS Volume 10.03.

•        D2671 - Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use has been revised to D2671-13 developed by Committee D09.07, ASTM BOS Volume 10.02.

•        D2837 - Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products has been revised to D2837-13 developed by Committee F17.40, ASTM BOS Volume 08.04.

•        D3004 - Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials has been reapproved, available as D3004-08(2013) developed by Committee D09.18, ASTM BOS Volume 10.02.

•        D3035 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter has been editorially changed, available as D3035-12e2 developed by Committee F17.26, ASTM BOS Volume 08.04.

•        D3053 - Standard Terminology Relating to Carbon Black has been revised to D3053-13a developed by Committee D24.41, ASTM BOS Volume 09.01.

•        D3137 - Standard Test Method for Rubber Property—Hydrolytic Stability has been reapproved, available as D3137-81(2013) developed by Committee D11.15, ASTM BOS Volume 09.01.

•        D3143/D3143M - Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus has been revised (with designation change) to D3143/D3143M-13 developed by Committee D04.47, ASTM BOS Volume 04.03.

•        D3145 - Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method has been revised to D3145-13 developed by Committee D09.01, ASTM BOS Volume 10.02.

•        D3213 - Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil has been revised to D3213-13 developed by Committee D18.02, ASTM BOS Volume 04.08.

•        D3265 - Standard Test Method for Carbon Black—Tint Strength has been revised to D3265-13a developed by Committee D24.21, ASTM BOS Volume 09.01.

•        D3305 - Standard Practice for Sampling Small Gas Volume in a Transformer (Withdrawn 2014) has been withdrawn, with no replacement. D3305- developed by Committee D27.07, ASTM BOS Volume 10.03.

•        D3382 - Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques has been revised to D3382-13 developed by Committee D09.12, ASTM BOS Volume 10.02.

•        D3441 - Standard Test Method for Mechanical Cone Penetration Tests of Soil (Withdrawn 2014) has been withdrawn, with no replacement. D3441-05 developed by Committee D18.02, ASTM BOS Volume 04.08.

•        D3542 - Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges has been reapproved, available as D3542-08(2013) developed by Committee D04.34, ASTM BOS Volume 04.03.

•        D3666 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials has been revised to D3666-13 developed by Committee D04.95, ASTM BOS Volume 04.03.

•        D3797 - Standard Test Method for Analysis of o-Xylene by Gas Chromatography (Withdrawn 2014) has been withdrawn, with no replacement. D3797- developed by Committee D16.01, ASTM BOS Volume 06.04.

•        D3858 - Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method has been reapproved, available as D3858-95(2014) developed by Committee D19.07, ASTM BOS Volume 11.01.

•        D3874 - Standard Test Method for Ignition of Materials by Hot Wire Sources has been revised to D3874-13 developed by Committee D09.21, ASTM BOS Volume 10.02.

•        D3906 - Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials has been reapproved, available as D3906-03(2013) developed by Committee D32.05, ASTM BOS Volume 05.05.

•        D3942 - Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite has been reapproved, available as D3942-03(2013) developed by Committee D32.05, ASTM BOS Volume 05.05.

•        D3977 - Standard Test Methods for Determining Sediment Concentration in Water Samples has been editorially changed, available as D3977-97(2013)e1 developed by Committee D19.07, ASTM BOS Volume 11.02.

•        D4164 - Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers has been revised to D4164-13 developed by Committee D32.02, ASTM BOS Volume 05.05.

•        D4180 - Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers has been revised to D4180-13 developed by Committee D32.02, ASTM BOS Volume 05.05.

•        D4245 - Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation has been reapproved, available as D4245-08(2013) developed by Committee D09.18, ASTM BOS Volume 10.02.

•        D4325 - Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes has been revised to D4325-13 developed by Committee D09.07, ASTM BOS Volume 10.02.

•        D4350 - Standard Test Method for Corrosivity Index of Plastics and Fillers has been revised to D4350-13 developed by Committee D20.16, ASTM BOS Volume 08.03.

•        D4362 - Standard Specification for Propane Thermophysical Property Tables has been revised to D4362-13 developed by Committee D03.08, ASTM BOS Volume 05.06.

•        D4385 - Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products has been revised to D4385-13 developed by Committee D20.18, ASTM BOS Volume 08.02.

•        D4388 - Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes has been revised to D4388-13 developed by Committee D09.07, ASTM BOS Volume 10.02.

•        D4422 - Standard Test Method for Ash in Analysis of Petroleum Coke has been revised to D4422-13 developed by Committee D02.05, ASTM BOS Volume 05.02.

•        D4438 - Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting has been revised (with title change) to D4438-13 developed by Committee D32.02, ASTM BOS Volume 05.05.

•        D4446/D4446M - Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments has been revised (with designation change) to D4446/D4446M-13 developed by Committee D01.42, ASTM BOS Volume 06.02.

•        D4538 - Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities has been revised to D4538-13 developed by Committee D33.92, ASTM BOS Volume 06.02.

•        D4568 - Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials has been revised to D4568-13 developed by Committee D09.18, ASTM BOS Volume 10.02.

•        D4712 - Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) has been withdrawn, with no replacement. D4712- developed by Committee D01.55, ASTM BOS Volume 06.02.

•        D4716/D4716M - Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head has been revised (with designation change) to D4716/D4716M-14 developed by Committee D35.03, ASTM BOS Volume 04.13.

•        D4788 - Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography has been reapproved, available as D4788-03(2013) developed by Committee D04.32, ASTM BOS Volume 04.03.

•        D4814 - Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-13b developed by Committee D02.A0.01, ASTM BOS Volume 05.02.

•        D4956 - Standard Specification for Retroreflective Sheeting for Traffic Control has been revised to D4956-13 developed by Committee D04.38, ASTM BOS Volume 04.03.

•        D4967 - Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables has been reapproved, available as D4967-99(2013) developed by Committee D09.18, ASTM BOS Volume 10.02.

•        D4989 - Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer has been reapproved (with editorial change), available as D4989/D4989M-90a(2014)e1 developed by Committee D08.03, ASTM BOS Volume 04.04.

•        D5030/D5030M - Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit has been revised to D5030/D5030M-13a developed by Committee D18.08, ASTM BOS Volume 04.08.

•        D5069/D5069M - Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings has been revised (with designation change) to D5069/D5069M-13 developed by Committee D01.61, ASTM BOS Volume 06.02.

•        D5076/D5076M - Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes has been revised (with designation change) to D5076/D5076M-13 developed by Committee D08.20, ASTM BOS Volume 04.04.

•        D5158 - Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving has been reapproved, available as D5158-98(2013) developed by Committee D28.02, ASTM BOS Volume 15.01.

•        D5188 - Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method) has been revised to D5188-13 developed by Committee D02.08, ASTM BOS Volume 05.02.

•        D5191 - Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) has been revised to D5191-13 developed by Committee D02.08, ASTM BOS Volume 05.02.

•        D5235 - Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products has been reinstated as D5235-13 developed by Committee D01.52, ASTM BOS Volume 06.02.

•        D5251 - Standard Practice for the Operation of the Tetrapod Walker Drum Tester (Withdrawn 2014) has been withdrawn, with no replacement. D5251- developed by Committee D13.21, ASTM BOS Volume 07.02.

•        D5311/D5311M - Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil has been revised (with designation change) to D5311/D5311M-13 developed by Committee D18.09, ASTM BOS Volume 04.08.

•        D5357 - Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction has been reapproved, available as D5357-03(2013) developed by Committee D32.05, ASTM BOS Volume 05.05.

•        D5425 - Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products has been revised to D5425-13 developed by Committee D09.21, ASTM BOS Volume 10.02.

•        D5521/D5521M - Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers has been revised (with designation change) to D5521/D5521M-13 developed by Committee D18.21, ASTM BOS Volume 04.08.

•        D5705 - Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils has been revised to D5705-13 developed by Committee D02.14, ASTM BOS Volume 05.02.

•        D5744 - Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell has been editorially changed, available as D5744-13e1 developed by Committee D34.01.04, ASTM BOS Volume 11.04.

•        D5821 - Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate has been revised to D5821-13 developed by Committee D04.51, ASTM BOS Volume 04.03.

•        D5875/D5875M - Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices has been revised (with designation change) to D5875/D5875M-13 developed by Committee D18.21, ASTM BOS Volume 04.08.

•        D5877 - Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams Based on Data Analytical Calculations (Withdrawn 2014) has been withdrawn, with no replacement. D5877-95(2005) developed by Committee D18.21, ASTM BOS Volume 04.09.

•        D6012 - Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer has been reapproved, available as D6012-03(2013) developed by Committee D31.04, ASTM BOS Volume 15.04.

•        D6026 - Standard Practice for Using Significant Digits in Geotechnical Data has been revised to D6026-13 developed by Committee D18.91, ASTM BOS Volume 04.09.

•        D6084/D6084M - Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer has been revised (with designation change) to D6084/D6084M-13 developed by Committee D04.44, ASTM BOS Volume 04.03.

•        D6132 - Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage has been revised to D6132-13 developed by Committee D01.23, ASTM BOS Volume 06.01.

•        D6140 - Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications has been reapproved, available as D6140-00(2014) developed by Committee D35.03, ASTM BOS Volume 04.13.

•        D6180 - Standard Test Method for Stability of Insulating Oils of Petroleum Origin Under Electrical Discharge (Withdrawn 2014) has been withdrawn, with no replacement. D6180- developed by Committee D27.05, ASTM BOS Volume 10.03.

•        D6186 - Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC) has been reapproved, available as D6186-08(2013) developed by Committee D02.09.0D, ASTM BOS Volume 05.03.

•        D6267/D6267M - Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures has been revised (with designation change) to D6267/D6267M-13 developed by Committee D01.34, ASTM BOS Volume 06.03.

•        D6282 - Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2014) has been withdrawn, with no replacement. D6282-98(2005) developed by Committee D18.21, ASTM BOS Volume 04.09.

•        D6300 - Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants has been revised to D6300-13a developed by Committee D02.94, ASTM BOS Volume 05.03.

•        D6576 - Standard Specification for Flexible Cellular Rubber Chemically Blown has been revised to D6576-13 developed by Committee D20.22, ASTM BOS Volume 08.03.

•        D6578/D6578M - Standard Practice for Determination of Graffiti Resistance has been revised (with designation change) to D6578/D6578M-13 developed by Committee D01.46, ASTM BOS Volume 06.02.

•        D6583 - Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption has been revised to D6583-13 developed by Committee D01.42, ASTM BOS Volume 06.02.

•        D6602 - Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both has been revised to D6602-13 developed by Committee D24.66, ASTM BOS Volume 09.01.

•        D6694/D6694M - Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems has been reapproved (with editorial change), available as D6694/D6694M-08(2013)e1 developed by Committee D08.06, ASTM BOS Volume 04.04.

•        D6878/D6878M - Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing has been revised to D6878/D6878M-13 developed by Committee D08.18, ASTM BOS Volume 04.04.

•        D7012 - Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures has been revised to D7012-13 developed by Committee D18.12, ASTM BOS Volume 04.09.

•        D7091 - Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals has been revised to D7091-13 developed by Committee D01.23, ASTM BOS Volume 06.01.

•        D7148 - Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System has been revised to D7148-13 developed by Committee D09.19, ASTM BOS Volume 10.02.

•        D7150 - Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress has been revised (with title change) to D7150-13 developed by Committee D27.03, ASTM BOS Volume 10.03.

•        D7226 - Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer has been revised to D7226-13 developed by Committee D04.42, ASTM BOS Volume 04.03.

•        D7313 - Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry has been revised to D7313-13 developed by Committee D04.26, ASTM BOS Volume 04.03.

•        D7322 - Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions has been revised to D7322-13a developed by Committee D18.25, ASTM BOS Volume 04.09.

•        D7486 - Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis has been editorially changed, available as D7486-08(2013)e1 developed by Committee D20.70, ASTM BOS Volume 08.03.

•        D7572 - Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil has been revised (with title change) to D7572-13 developed by Committee D19.06, ASTM BOS Volume 11.02.

•        D7633 - Standard Test Method for Carbon Black—Carbon Content has been revised to D7633-13 developed by Committee D24.66, ASTM BOS Volume 09.01.

•        D7662 - Standard Test Method for Carbon Content in Carbon Black Feedstock Oils has been revised to D7662-13 developed by Committee D24.66, ASTM BOS Volume 09.01.

•        D7679 - Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils has been revised to D7679-13 developed by Committee D24.66, ASTM BOS Volume 09.01.

•        D7734/D7734M - Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method is a new standard, now available. D7734/D7734M-13 developed by Committee D01.56, ASTM BOS Volume 06.02.

•        D7735 - Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures has been editorially changed, available as D7735-11e1 developed by Committee D01.44, ASTM BOS Volume 06.02.

•        D7771 - Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black has been revised to D7771-13 developed by Committee D24.66, ASTM BOS Volume 09.01.

•        D7786 - Standard Test Method for Determining Enamel Holdout has been revised to D7786-13 developed by Committee D01.42, ASTM BOS Volume 06.02.

•        D7854 - Standard Test Method for Carbon Black-Void Volume at Mean Pressure is a new standard, now available. D7854-13 developed by Committee D24.11, ASTM BOS Volume 09.01.

•        D7879 - Standard Test Method for Determining Flax Fiber Widths Using Image Analysis is a new standard, now available. D7879-13 developed by Committee D13.17, ASTM BOS Volume 07.02.

•        D7888 - Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings is a new standard, now available. D7888-13 developed by Committee D14.10, ASTM BOS Volume 15.06.

•        E72 - Standard Test Methods of Conducting Strength Tests of Panels for Building Construction has been revised to E72-13a developed by Committee E06.11, ASTM BOS Volume 04.11.

•        E96/E96M - Standard Test Methods for Water Vapor Transmission of Materials has been revised to E96/E96M-13 developed by Committee C16.33, ASTM BOS Volume 04.06.

•        E126 - Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers has been revised to E126-13a developed by Committee E20.05, ASTM BOS Volume 14.03.

•        E135 - Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials has been revised to E135-13a developed by Committee E01.23, ASTM BOS Volume 03.05.

•        E220 - Standard Test Method for Calibration of Thermocouples By Comparison Techniques has been revised to E220-13 developed by Committee E20.04, ASTM BOS Volume 14.03.

•        E243 - Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes has been revised to E243-13 developed by Committee E07.07, ASTM BOS Volume 03.03.

•        E284 - Standard Terminology of Appearance has been revised to E284-13b developed by Committee E12.01, ASTM BOS Volume 06.01.

•        E372 - Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration has been revised (with title change) to E372-13 developed by Committee E01.01, ASTM BOS Volume 03.05.

•        E572 - Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry has been revised to E572-13 developed by Committee E01.01, ASTM BOS Volume 03.05.

•        E582 - Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures has been editorially changed, available as E582-07(2013)e1 developed by Committee E27.04, ASTM BOS Volume 14.02.

•        E608/E608M - Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples has been revised to E608/E608M-13 developed by Committee E20.04, ASTM BOS Volume 14.03.

•        E633 - Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air has been revised to E633-13 developed by Committee E28.04, ASTM BOS Volume 03.01.

•        E659 - Standard Test Method for Autoignition Temperature of Liquid Chemicals has been revised to E659-13 developed by Committee E27.04, ASTM BOS Volume 14.02.

•        E683 - Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings has been reapproved, available as E683-91(2013) developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E788 - Standard Specification for Pipet, Blood Diluting has been reapproved, available as E788-97(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E814 - Standard Test Method for Fire Tests of Penetration Firestop Systems has been revised to E814-13a developed by Committee E05.11, ASTM BOS Volume 04.07.

•        E832 - Standard Specification for Laboratory Filter Papers has been reapproved, available as E832-81(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E861 - Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors has been revised to E861-13 developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E898 - Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances has been reapproved, available as E898-88(2013) developed by Committee E41.06, ASTM BOS Volume 14.04.

•        E904 - Standard Practice for Generating All-Day Thermal Performance Data for Solar Collectors (Withdrawn 2013) has been withdrawn, with no replacement. E904- developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E905 - Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors has been reapproved, available as E905-87(2013) developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E920 - Standard Specification for Commercially Packaged Laboratory Apparatus has been reapproved, available as E920-97(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E923 - Standard Specification for Glass Westergren Tube, Reusable has been reapproved, available as E923-97(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E960 - Standard Specification for Laboratory Glass Beakers has been reapproved, available as E960-93(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E961 - Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable has been reapproved, available as E961-97(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E972 - Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight has been reapproved, available as E972-96(2013) developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E1033 - Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature has been revised to E1033-13 developed by Committee E07.07, ASTM BOS Volume 03.03.

•        E1056 - Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings has been revised to E1056-13 developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E1089 - Standard Test Method for Water Penetration of Flat Plate Solar Collectors by Uniform Static Air Pressure Difference (Withdrawn 2013) has been withdrawn, with no replacement. E1089- developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E1160 - Standard Guide for On-Site Inspection and Verification of Operation of Solar Domestic Hot Water Systems has been revised to E1160-13 developed by Committee E44.05, ASTM BOS Volume 12.02.

•        E1232 - Standard Test Method for Temperature Limit of Flammability of Chemicals has been reapproved, available as E1232-07(2013) developed by Committee E27.04, ASTM BOS Volume 14.02.

•        E1254 - Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films has been revised to E1254-13 developed by Committee E07.01, ASTM BOS Volume 03.03.

•        E1273 - Standard Specification for Color Coding of Reusable Laboratory Pipets has been reapproved, available as E1273-88(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E1316 - Standard Terminology for Nondestructive Examinations has been revised to E1316-13d developed by Committee E07.92, ASTM BOS Volume 03.03.

•        E1403 - Standard Specification for Laboratory Glass Boiling Flasks has been reapproved, available as E1403-97(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E1404 - Standard Specification for Laboratory Glass Conical Flasks has been reapproved, available as E1404-94(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E1410 - Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (Withdrawn 2014) has been withdrawn, with no replacement. E1410-05 developed by Committee E06.25, ASTM BOS Volume 04.11.

•        E1422 - Standard Guide for Test Methods for Forensic Writing Ink Comparison (Withdrawn 2014) has been withdrawn, with no replacement. E1422-05 developed by Committee E30.90, ASTM BOS Volume 14.02.

•        E1464 - Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (Withdrawn 2014) has been withdrawn, with no replacement. E1464-05 developed by Committee E06.25, ASTM BOS Volume 04.11.

•        E1522 - Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware has been reapproved, available as E1522-93(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E1534 - Standard Test Method for Determination of Ash Content of Particulate Wood Fuels has been reapproved, available as E1534-93(2013) developed by Committee E48.05, ASTM BOS Volume 11.06.

•        E1641 - Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method has been revised to E1641-13 developed by Committee E37.01, ASTM BOS Volume 14.02.

•        E1685 - Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique has been revised to E1685-13 developed by Committee E28.13, ASTM BOS Volume 03.01.

•        E1727 - Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014) has been withdrawn, with no replacement. E1727-05 developed by Committee E06.23, ASTM BOS Volume 04.11.

•        E1729 - Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014) has been withdrawn, with no replacement. E1729-05 developed by Committee E06.23, ASTM BOS Volume 04.11.

•        E1820 - Standard Test Method for Measurement of Fracture Toughness has been revised to E1820-13 developed by Committee E08.07, ASTM BOS Volume 03.01.

•        E1856 - Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines has been revised to E1856-13 developed by Committee E28.15, ASTM BOS Volume 03.01.

•        E1878 - Standard Specification for Laboratory Glass Volumetric Flasks, Special Use has been reapproved, available as E1878-97(2013) developed by Committee E41.01, ASTM BOS Volume 14.04.

•        E1928 - Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing has been revised to E1928-13 developed by Committee E28.13, ASTM BOS Volume 03.01.

•        E1991 - Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products (Withdrawn 2014) has been withdrawn, with no replacement. E1991-05 developed by Committee E60.01, ASTM BOS Volume 04.12.

•        E2001 - Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts has been revised to E2001-13 developed by Committee E07.06, ASTM BOS Volume 03.03.

•        E2019 - Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air has been reapproved, available as E2019-03(2013) developed by Committee E27.05, ASTM BOS Volume 14.02.

•        E2021 - Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers has been reapproved, available as E2021-09(2013) developed by Committee E27.04, ASTM BOS Volume 14.02.

•        E2079 - Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors has been reapproved, available as E2079-07(2013) developed by Committee E27.04, ASTM BOS Volume 14.02.

•        E2149 - Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions has been revised (with title change) to E2149-13a developed by Committee E35.15, ASTM BOS Volume 11.05.

•        E2201 - Standard Terminology for Coal Combustion Products has been reinstated as E2201-13 developed by Committee E50.03, ASTM BOS Volume 11.05.

•        E2207 - Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens has been reapproved (with editorial change), available as E2207-08(2013)e1 developed by Committee E08.05, ASTM BOS Volume 03.01.

•        E2243 - Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation has been reinstated as E2243-13 developed by Committee E50.03, ASTM BOS Volume 11.05.

•        E2255/E2255M - Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings has been revised (with designation change) to E2255/E2255M-13 developed by Committee E06.23, ASTM BOS Volume 04.12.

•        E2264 - Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products has been reapproved, available as E2264-05(2013) developed by Committee E06.51, ASTM BOS Volume 04.12.

•        E2278 - Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage has been reinstated as E2278-13 developed by Committee E50.03, ASTM BOS Volume 11.05.

•        E2293 - Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury has been reapproved, available as E2293-03(2013) developed by Committee E01.02, ASTM BOS Volume 03.05.

•        E2294 - Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry has been reapproved, available as E2294-03(2013) developed by Committee E01.02, ASTM BOS Volume 03.05.

•        E2295 - Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in "sSlags and Cupels has been revised to E2295-13 developed by Committee E01.02, ASTM BOS Volume 03.05.

•        E2325 - Standard Guide for Non-destructive Examination of Paper (Withdrawn 2014) has been withdrawn, with no replacement. E2325-05e1 developed by Committee E30.90, ASTM BOS Volume 14.02.

•        E2389 - Standard Guide for Examination of Documents Produced with Liquid Ink Jet Technology (Withdrawn 2014) has been withdrawn, with no replacement. E2389-05 developed by Committee E30.90, ASTM BOS Volume 14.02.

•        E2395 - Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact has been reapproved, available as E2395-06(2013) developed by Committee E06.51, ASTM BOS Volume 04.12.

•        E2414 - Standard Test Method for Quantitative Sporicidal Three-Step Method (TSM) to Determine Sporicidal Efficacy of Liquids, Liquid Sprays, and Vapor or Gases on Contaminated Carrier Surfaces (Withdrawn 2014) has been withdrawn, with no replacement. E2414- developed by Committee E54.03, ASTM BOS Volume 15.08.

•        E2586 - Standard Practice for Calculating and Using Basic Statistics has been revised to E2586-13 developed by Committee E11.10, ASTM BOS Volume 14.02.

•        E2627 - Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials has been revised to E2627-13 developed by Committee E04.11, ASTM BOS Volume 03.01.

•        E2699 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods has been revised to E2699-13 developed by Committee E07.11, ASTM BOS Volume 03.03.

•        E2738 - Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods has been revised to E2738-13 developed by Committee E07.11, ASTM BOS Volume 03.03.

•        E2767 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods has been revised to E2767-13 developed by Committee E07.11, ASTM BOS Volume 03.03.

•        E2849 - Standard Practice for Professional Certification Performance Testing is a new standard, now available. E2849-13 developed by Committee E36.80, ASTM BOS Volume 14.02.

•        E2868 - Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness is a new standard, now available. E2868-13 developed by Committee E07.02, ASTM BOS Volume 03.03.

•        E2895 - Standard Test Method for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium is a new standard, now available. E2895-13 developed by Committee E35.15, ASTM BOS Volume 11.05.

•        E2905/E2905M - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods has been revised to E2905/E2905M-13 developed by Committee E07.07, ASTM BOS Volume 03.03.

•        E2915 - Standard Guide for Emergency Operations Center (EOC) Management is a new standard, now available. E2915-13 developed by Committee E54.02, ASTM BOS Volume 15.08.

•        E2920 - Standard Guide for Recording Occupational Injuries and Illnesses is a new standard, now available. E2920-14 developed by Committee E34.80, ASTM BOS Volume 11.03.

•        E2921 - Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes and Rating Systems is a new standard, now available. E2921-13 developed by Committee E60.01, ASTM BOS Volume 04.12.

•        E2955 - Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces is a new standard, now available. E2955-13 developed by Committee E17.33, ASTM BOS Volume 04.03.

•        F136 - Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) has been revised to F136-13 developed by Committee F04.12, ASTM BOS Volume 13.01.

•        F137 - Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus has been reapproved, available as F137-08(2013) developed by Committee F06.20, ASTM BOS Volume 15.04.

•        F404 - Standard Consumer Safety Specification for High Chairs has been revised to F404-13a developed by Committee F15.16, ASTM BOS Volume 15.11.

•        F410 - Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement has been reapproved, available as F410-08(2013) developed by Committee F06.20, ASTM BOS Volume 15.04.

•        F421 - Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires has been reapproved (with editorial change), available as F421-07(2013)e1 developed by Committee F09.30, ASTM BOS Volume 09.02.

•        F484 - Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds has been reapproved, available as F484-08(2013) developed by Committee F07.07, ASTM BOS Volume 15.03.

•        F485 - Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces has been reapproved, available as F485-08(2013) developed by Committee F07.07, ASTM BOS Volume 15.03.

•        F502 - Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces has been reapproved, available as F502-08(2013) developed by Committee F07.07, ASTM BOS Volume 15.03.

•        F510/F510M - Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method has been revised (with designation change) to F510/F510M-13 developed by Committee F06.30, ASTM BOS Volume 15.04.

•        F519 - Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments has been revised to F519-13 developed by Committee F07.04, ASTM BOS Volume 15.03.

•        F542 - Standard Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 2013) has been withdrawn, with no replacement. F542- developed by Committee D09.01, ASTM BOS Volume 10.02.

•        F543 - Standard Specification and Test Methods for Metallic Medical Bone Screws has been editorially changed, available as F543-13e1 developed by Committee F04.21, ASTM BOS Volume 13.01.

•        F560 - Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) has been editorially changed, available as F560-13e1 developed by Committee F04.12, ASTM BOS Volume 13.01.

•        F593 - Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs has been revised to F593-13a developed by Committee F16.04, ASTM BOS Volume 01.08.

•        F606 - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets has been revised to F606-13 developed by Committee F16.01, ASTM BOS Volume 01.08.

•        F606M - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) has been revised to F606M-13a developed by Committee F16.01, ASTM BOS Volume 01.08.

•        F609 - Standard Test Method for Using a Horizontal Pull Slipmeter (HPS) has been reapproved, available as F609-05(2013) developed by Committee F13.10, ASTM BOS Volume 15.07.

•        F677 - Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications (Withdrawn 2013) has been withdrawn, with no replacement. F677- developed by Committee D09.01, ASTM BOS Volume 10.02.

•        F679 - Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings has been revised to F679-13a developed by Committee F17.62, ASTM BOS Volume 08.04.

•        F711 - Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools? has been reapproved, available as F711-02(2013) developed by Committee F18.35, ASTM BOS Volume 10.03.

•        F771 - Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014) has been withdrawn, with no replacement. F771- developed by Committee F17.61, ASTM BOS Volume 08.04.

•        F790 - Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures has been reapproved, available as F790-08(2013) developed by Committee F07.08, ASTM BOS Volume 15.03.

•        F791 - Standard Test Method for Stress Crazing of Transparent Plastics has been reapproved, available as F791-96(2013) developed by Committee F07.08, ASTM BOS Volume 15.03.

•        F837 - Standard Specification for Stainless Steel Socket Head Cap Screws has been revised to F837-13 developed by Committee F16.04, ASTM BOS Volume 01.08.

•        F942 - Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures has been reapproved, available as F942-02(2013) developed by Committee F07.08, ASTM BOS Volume 15.03.

•        F1080 - Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer has been reapproved, available as F1080-93(2013) developed by Committee F07.07, ASTM BOS Volume 15.03.

•        F1104 - Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing has been reapproved, available as F1104-02(2013) developed by Committee F07.07, ASTM BOS Volume 15.03.

•        F1111 - Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals has been reapproved, available as F1111-08b(2013) developed by Committee F07.07, ASTM BOS Volume 15.03.

•        F1292 - Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment has been revised to F1292-13 developed by Committee F08.63, ASTM BOS Volume 15.07.

•        F1304 - Standard Test Method for Deflection of Resilient Floor Tile has been reapproved, available as F1304-08(2013) developed by Committee F06.20, ASTM BOS Volume 15.04.

•        F1314 - Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) has been editorially changed, available as F1314-13ae1 developed by Committee F04.12, ASTM BOS Volume 13.01.

•        F1316 - Standard Test Method for Measuring the Transmissivity of Transparent Parts has been reapproved, available as F1316-90(2013) developed by Committee F07.08, ASTM BOS Volume 15.03.

•        F1342/F1342M - Standard Test Method for Protective Clothing Material Resistance to Puncture has been reapproved (with editorial change), available as F1342/F1342M-05(2013)e1 developed by Committee F23.20, ASTM BOS Volume 11.03.

•        F1362 - Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials has been revised to F1362-13 developed by Committee F07.08, ASTM BOS Volume 15.03.

•        F1546 - Standard Specification for Fire Hose Nozzles has been editorially changed, available as F1546-96(2012)e1 developed by Committee F25.07, ASTM BOS Volume 01.07.

•        F1825 - Standard Specification for Clampstick Type Live Line Tools has been reapproved, available as F1825-03(2013) developed by Committee F18.35, ASTM BOS Volume 10.03.

•        F1862/F1862M - Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) has been revised (with designation change) to F1862/F1862M-13 developed by Committee F23.40, ASTM BOS Volume 11.03.

•        F1932/F1932M - Standard Test Method for Measuring Sleeping Bag Loft has had a change in designation. The new designation is F1932/F1932M-98(2011)e1 developed by Committee F08.22, ASTM BOS Volume 15.07.

•        F2023 - Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water has been revised to F2023-13 developed by Committee F17.40, ASTM BOS Volume 08.04.

•        F2034 - Standard Specification for Sheet Linoleum Floor Covering has been reapproved, available as F2034-08(2013) developed by Committee F06.80, ASTM BOS Volume 15.04.

•        F2043 - Standard Classification for Bicycle Usage has been revised to F2043-13 developed by Committee F08.10, ASTM BOS Volume 15.07.

•        F2066 - Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) has been editorially changed, available as F2066-13e1 developed by Committee F04.12, ASTM BOS Volume 13.01.

•        F2102 - Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants has been revised (with title change) to F2102-13 developed by Committee F04.15, ASTM BOS Volume 13.01.

•        F2150 - Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products has been revised to F2150-13 developed by Committee F04.42, ASTM BOS Volume 13.01.

•        F2158 - Standard Specification for Residential Central-Vacuum Tube and Fittings has been reapproved, available as F2158-08(2013) developed by Committee F11.50, ASTM BOS Volume 15.08.

•        F2165 - Standard Specification for Flexible Pre-Insulated Piping has been revised to F2165-13 developed by Committee F17.11, ASTM BOS Volume 08.04.

•        F2195 - Standard Specification for Linoleum Floor Tile has been revised to F2195-13 developed by Committee F06.80, ASTM BOS Volume 15.04.

•        F2211 - Standard Classification for Tissue Engineered Medical Products (TEMPs) has been reinstated as F2211-13 developed by Committee F04.41, ASTM BOS Volume 13.01.

•        F2291 - Standard Practice for Design of Amusement Rides and Devices has been revised to F2291-13 developed by Committee F24.24, ASTM BOS Volume 15.07.

•        F2487 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines has been revised (with title change) to F2487-13 developed by Committee F17.20, ASTM BOS Volume 08.04.

•        F2489 - Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases has been reapproved, available as F2489-06(2013) developed by Committee F34.02, ASTM BOS Volume 01.08.

•        F2530 - Standard Specification for Protective Headgear with Faceguard Used in Bull Riding has been revised to F2530-13 developed by Committee F08.53, ASTM BOS Volume 15.07.

•        F2531 - Standard Test Method for Load Capacity of Treestand Seats has been revised to F2531-13 developed by Committee F08.16, ASTM BOS Volume 15.07.

•        F2619/F2619M - Standard Specification for High-Density Polyethylene (PE) Line Pipe has been revised to F2619/F2619M-13 developed by Committee F17.68, ASTM BOS Volume 08.04.

•        F2647 - Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System) has been reapproved, available as F2647-07(2013) developed by Committee F11.30, ASTM BOS Volume 15.08.

•        F2660 - Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement has been revised (with title change) to F2660-13 developed by Committee F16.01, ASTM BOS Volume 01.08.

•        F2736 - Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe has been revised to F2736-13 developed by Committee F17.26, ASTM BOS Volume 08.04.

•        F2773 - Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders has been revised to F2773-13 developed by Committee F08.24, ASTM BOS Volume 15.07.

•        F2788/F2788M - Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe has been revised (with designation change) to F2788/F2788M developed by Committee F17.26, ASTM BOS Volume 08.04.

•        F2807 - Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications is a new standard, now available. F2807-13 developed by Committee F17.11, ASTM BOS Volume 08.04.

•        F2867 - Standard Terminology Relating to Thoroughbred Horse Racing Surfaces is a new standard, now available. F2867-13 developed by Committee F08.28, ASTM BOS Volume 15.07.

•        F2922 - Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers has been editorially changed, available as F2922-13e1 developed by Committee F17.65, ASTM BOS Volume 08.04.

•        F3015 - Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E is a new standard, now available. F3015-13 developed by Committee F09.30, ASTM BOS Volume 09.02.

•        F3036 - Standard Guide for Testing Absorbable Stents is a new standard, now available. F3036-13 developed by Committee F04.30, ASTM BOS Volume 13.02.

•        F3039 - Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration is a new standard, now available. F3039-13 developed by Committee F02.40, ASTM BOS Volume 15.10.

•        G3 - Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing has been revised to G3-13 developed by Committee G01.11, ASTM BOS Volume 03.02.

•        G5 - Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements has been editorially changed, available as G5-13e2 developed by Committee G01.11, ASTM BOS Volume 03.02.

•        G16 - Standard Guide for Applying Statistics to Analysis of Corrosion Data has been revised to G16-13 developed by Committee G01.05, ASTM BOS Volume 03.02.

•        G21 - Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi has been revised to G21-13 developed by Committee G03.04, ASTM BOS Volume 14.04.

•        G94 - Standard Guide for Evaluating Metals for Oxygen Service has been reapproved, available as G94-05(2014) developed by Committee G04.02, ASTM BOS Volume 14.04.

•        G141 - Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials has been reapproved, available as G141-09(2013) developed by Committee G03.93, ASTM BOS Volume 14.04.

•        G175 - Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications has been revised to G175-13 developed by Committee G04.01, ASTM BOS Volume 14.04.

•        G182 - Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings has been revised to G182-13 developed by Committee G02.50, ASTM BOS Volume 03.02.

 

Published in international.