ASTM Standards

Issue 53 – September 2013

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished has been revised to A108-13 developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel has been revised to A242/A242M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A328/A328M Standard Specification for Steel Sheet Piling has been revised to A328/A328M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use has been editorially changed, available as A668/A668M-13e1 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements has been revised to A830/A830M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement has been revised to A970/A970M-13a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement has been revised to A1035/A1035M-13a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1086 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types is a new standard, now available. A1086-13 developed by Committee A06.02, ASTM BOS Volume 03.04.
  • B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture has been reapproved, available as B37-08(2013) developed by Committee B07.01, ASTM BOS Volume 02.02.
  • B85/B85M Standard Specification for Aluminum-Alloy Die Castings has been editorially changed, available as B85/B85M-10e1 developed by Committee B07.01, ASTM BOS Volume 02.02.
  • B106 Standard Test Methods for Flexivity of Thermostat Metals has been reapproved, available as B106-08(2013) developed by Committee B02.10, ASTM BOS Volume 02.04.
  • B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes has been editorially changed, available as B179-11e1 developed by Committee B07.01, ASTM BOS Volume 02.02.
  • B223 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method) has been reapproved, available as B223-08(2013) developed by Committee B02.10, ASTM BOS Volume 02.04.
  • B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube has been editorially changed, available as B241/B241M-12e1 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought has been reapproved, available as B275-05(2013) developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B381 Standard Specification for Titanium and Titanium Alloy Forgings has been revised to B381-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) has been reapproved, available as B539-02(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B773 Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies (Withdrawn 2013) has been withdrawn, with no replacement. B773- developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications has been reapproved, available as B812-96(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts has been reapproved, available as B845-97(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe has been revised to B861-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe has been revised to B862-13a developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B863 Standard Specification for Titanium and Titanium Alloy Wire has been revised to B863-13a developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B871 Standard Test Method for Tear Testing of Aluminum Alloy Products has been reapproved, available as B871-01(2013) developed by Committee B07.05, ASTM BOS Volume 02.02.
  • B977 Standard Specification for Titanium and Titanium Ingots has been revised to B977-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile has been revised to C67-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate has been revised to C88-13 developed by Committee C09.20, ASTM BOS Volume 04.02.
  • C94/C94M Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-13a developed by Committee C09.40, ASTM BOS Volume 04.02.
  • C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement has been editorially changed, available as C114-11be1 developed by Committee C01.23, ASTM BOS Volume 04.01.
  • C125 Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-13a developed by Committee C09.91, ASTM BOS Volume 04.02.
  • C140/C140M Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units has been revised (with designation change) to C140/C140M-13a developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores has been revised to C174/C174M-13 developed by Committee C09.69, ASTM BOS Volume 04.02.
  • C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory has been revised to C192/C192M-13 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C219 Standard Terminology Relating to Hydraulic Cement has been revised to C219-13 developed by Committee C01.91, ASTM BOS Volume 04.01.
  • C232/C232M Standard Test Method for Bleeding of Concrete has been revised to C232/C232M-13a developed by Committee C09.60, ASTM BOS Volume 04.02.
  • C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid has been reapproved, available as C400-98(2013) developed by Committee C07.05, ASTM BOS Volume 04.01.
  • C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite has been reapproved, available as C492-92(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
  • C544 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain has been reapproved, available as C544-03(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
  • C645 Standard Specification for Nonstructural Steel Framing Members has been revised to C645-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials has been revised to C670-13 developed by Committee C09.94, ASTM BOS Volume 04.02.
  • C688 Standard Specification for Functional Additions for Use in Hydraulic Cements has been editorially changed, available as C688-08e1 developed by Committee C01.20, ASTM BOS Volume 04.01.
  • C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes? has been reapproved, available as C831-98(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
  • C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear has been revised to C882/C882M-13 developed by Committee C09.25, ASTM BOS Volume 04.02.
  • C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar has been revised to C887-13 developed by Committee C12.06, ASTM BOS Volume 04.05.
  • C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering has been reapproved, available as C932-06(2013) developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer has been revised to C1057-12 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation has been revised to C1077-13b developed by Committee C09.98, ASTM BOS Volume 04.02.
  • C1093 Standard Practice for Accreditation of Testing Agencies for Masonry has been revised to C1093-13 developed by Committee C15.07, ASTM BOS Volume 04.05.
  • C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts has been reapproved, available as C1381/C1381M-97(2013) developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars has been revised to C1403-13 developed by Committee C12.02, ASTM BOS Volume 04.05.
  • C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design has been revised to C1417-13 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) has been revised to C1417M-13a developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers has been revised to C1433-13b developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) has been revised to C1433M-13b developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1437 Standard Test Method for Flow of Hydraulic Cement Mortar has been revised to C1437-13 developed by Committee C01.22, ASTM BOS Volume 04.01.
  • C1456 Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF) has been revised to C1456-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1463 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis has been revised to C1463-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains has been revised to C1504-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric) has been revised to C1504M-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD has been revised to C1577-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1597M Standard Specification for Gypsum Wallboard (Hard Metric Sizes) (Withdrawn 2013) has been withdrawn, with no replacement. C1597M- developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C1670 Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units is a new standard, now available. C1670-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete has been revised to C1761/C1761M-13a developed by Committee C09.21, ASTM BOS Volume 04.02.
  • C1764 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications is a new standard, now available. C1764-12 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C1766 Standard Specification for Factory-Laminated Gypsum Panel Products is a new standard, now available. C1766-13 developed by Committee C11.01, ASTM BOS Volume 04.01.
  • D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester has been revised to D93-13 developed by Committee D02.08, ASTM BOS Volume 05.01.
  • D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation has been revised to D95-13 developed by Committee D02.02, ASTM BOS Volume 05.01.
  • D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) has been revised to D129-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D187 Standard Test Method for Burning Quality of Kerosine has been reapproved, available as D187-08(2013) developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D482 Standard Test Method for Ash from Petroleum Products has been revised to D482-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D519 Standard Test Method for Length of Fiber in Wool Top has been reapproved, available as D519-04(2013) developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D613 Standard Test Method for Cetane Number of Diesel Fuel Oil has been editorially changed, available as D613-10ae1 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D646 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) has been reinstated as D646-13 developed by Committee D13.19, ASTM BOS Volume 07.01.
  • D861 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns has been reapproved, available as D861-07(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives has been revised to D874-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D888 Standard Test Methods for Dissolved Oxygen in Water has been editorially changed, available as D888-12e1 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline has been editorially changed, available as D909-07(2012)e1 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D1006/D1006M Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood has been revised (with designation change) to D1006/D1006M-13 developed by Committee D01.27, ASTM BOS Volume 06.01.
  • D1094 Standard Test Method for Water Reaction of Aviation Fuels has been reapproved, available as D1094-07(2013) developed by Committee D02.J0.05, ASTM BOS Volume 05.01.
  • D1109 Standard Test Method for 1% Sodium Hydroxide Solubility of Wood has been reapproved, available as D1109-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D1113 Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool has been revised to D1113-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D1165 Standard Nomenclature of Commercial Hardwoods and Softwoods has been revised to D1165-13 developed by Committee D07.91, ASTM BOS Volume 04.10.
  • D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials has been reapproved, available as D1166-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D1234 Standard Test Method of Sampling and Testing Staple Length of Grease Wool has been revised to D1234-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer has been revised to D1238-13 developed by Committee D20.30, ASTM BOS Volume 08.01.
  • D1252 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water has been editorially changed, available as D1252-06(2012)e1 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method) has been revised to D1266-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels has been reapproved, available as D1405/D1405M-08(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
  • D1422/D1422M Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method has been revised (with designation change) to D1422/D1422M-13 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D1424 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus has been reapproved, available as D1424-09(2013) developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D1429 Standard Test Methods for Specific Gravity of Water and Brine has been revised to D1429-13 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics has been revised to D1499-13 developed by Committee D20.50, ASTM BOS Volume 08.01.
  • D1574 Standard Test Method for Extractable Matter in Wool and Other Animal Fibers has been reapproved, available as D1574-04(2013) developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D1575 Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver has been revised to D1575-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D1576 Standard Test Method for Moisture in Wool by Oven-Drying has been revised to D1576-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D1762 Standard Test Method for Chemical Analysis of Wood Charcoal has been reapproved, available as D1762-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D1765 Standard Classification System for Carbon Blacks Used in Rubber Products has been revised to D1765-13 developed by Committee D24.41, ASTM BOS Volume 09.01.
  • D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) has been editorially changed, available as D1796-11e1 developed by Committee D02.02, ASTM BOS Volume 05.01.
  • D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks has been revised to D1985-13 developed by Committee D04.33, ASTM BOS Volume 04.03.  
  • D2068 Standard Test Method for Determining Filter Blocking Tendency has been revised to D2068-13 developed by Committee D02.14, ASTM BOS Volume 05.01.
  • D2130 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection has been revised to D2130-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D2157 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels has been reapproved, available as D2157-94(2013) developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards has been revised to D2162-13 developed by Committee D02.07, ASTM BOS Volume 05.01.
  • D2255/D2255M Standard Test Method for Grading Spun Yarns for Appearance has been reapproved, available as D2255/D2255M-09(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2260 Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems has been reapproved, available as D2260-03(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch has been reapproved, available as D2318-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
  • D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) has been reapproved, available as D2319/D2319M-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
  • D2414 Standard Test Method for Carbon Black—Oil Absorption Number (OAN) has been revised to D2414-13 developed by Committee D24.11, ASTM BOS Volume 09.01.
  • D2421 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis has been revised to D2421-13 developed by Committee D02.H0, ASTM BOS Volume 05.01.
  • D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System has been reapproved, available as D2422-97(2013) developed by Committee D02.L0.11, ASTM BOS Volume 05.01.
  • D2462 Standard Test Method for Moisture in Wool by Distillation With Toluene has been revised to D2462-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D2520 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC has been reinstated as D2520-13 developed by Committee D09.12, ASTM BOS Volume 10.02.
  • D2524 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18-in. (3.2-mm) Gage Length has been revised to D2524-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D2525 Standard Practice for Sampling Wool for Moisture has been revised to D2525-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils has been reapproved, available as D2603-01(2013) developed by Committee D02.07, ASTM BOS Volume 05.01.
  • D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures has been revised (with designation change) to D2726/D2726M-13 developed by Committee D04.21, ASTM BOS Volume 04.03.
  • D2880 Standard Specification for Gas Turbine Fuel Oils has been revised to D2880-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D2890 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels has been reapproved, available as D2890-92(2013) developed by Committee D02.04.0K, ASTM BOS Volume 05.01.
  • D2968 Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection has been revised to D2968-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils has been reapproved, available as D2982-07(2013) developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D3136 Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products has been revised to D3136-13 developed by Committee D13.62, ASTM BOS Volume 07.01.
  • D3149 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation has been reapproved, available as D3149-06(2013) developed by Committee D09.07, ASTM BOS Volume 10.02.
  • D3201/D3201M Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products has been revised (with designation change) to D3201/D3201M-13 developed by Committee D07.07, ASTM BOS Volume 04.10.
  • D3217/D3217M Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations has been revised (with designation change) to D3217/D3217M-13 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) has been revised to D3227-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D3493 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) has been revised to D3493-13 developed by Committee D24.11, ASTM BOS Volume 09.01.
  • D3655 Standard Performance Specification for Men's and Women's Sliver Knitted Overcoat and Jacket Fabrics has been revised to D3655-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D3782 Standard Performance Specification for Men's and Boys' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics has been revised to D3782-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D3785 Standard Performance Specification for Woven Necktie and Scarf Fabrics has been revised to D3785-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D3862 Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality has been reinstated, with revision to D3862-13 developed by Committee D19.08, ASTM BOS Volume 11.01.
  • D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer has been revised to D3948-13 developed by Committee D02.J0.05, ASTM BOS Volume 05.02.
  • D3994 Standard Performance Specification for Woven Swimwear Fabrics has been revised to D3994-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D3995 Standard Performance Specification for Men's and Women's Knitted Career Apparel Fabrics: Dress and Vocational has been revised to D3995-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D3996 Standard Performance Specification for Knit Swimwear Fabrics has been revised to D3996-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D4006 Standard Test Method for Water in Crude Oil by Distillation has been editorially changed, available as D4006-11(2012)e1 developed by Committee D02.02, ASTM BOS Volume 05.02.
  • D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) has been editorially changed, available as D4007-11e1 developed by Committee D02.02, ASTM BOS Volume 05.02.
  • D4025 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection has been reapproved, available as D4025-08a(2013) developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D4035 Standard Performance Specification for Knitted Necktie and Scarf Fabrics has been revised to D4035-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method has been revised to D4047-13 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch has been reapproved, available as D4072-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
  • D4157 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) has been revised to D4157-13 developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D4193 Standard Test Method for Thiocyanate in Water has been editorially changed, available as D4193-08(2013)e1 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics has been revised (with title change) to D4329-13 developed by Committee D20.50, ASTM BOS Volume 08.03.
  • D4364 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight has been revised to D4364-13 developed by Committee D20.50, ASTM BOS Volume 08.02.
  • D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst has been revised to D4365-13 developed by Committee D32.01, ASTM BOS Volume 05.05.
  • D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method has been reapproved, available as D4567-03(2013) developed by Committee D32.01, ASTM BOS Volume 05.05.
  • D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch has been reapproved, available as D4616-95(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
  • D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration has been reapproved, available as D4746-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
  • D4785 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water has been editorially changed, available as D4785-08(2013)e1 developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption has been revised to D4824-13 developed by Committee D32.01, ASTM BOS Volume 05.05.
  • D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents has been editorially changed, available as D4841-88(2013)e1 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D4850 Standard Terminology Relating to Fabrics and Fabric Test Methods has been revised to D4850-13 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D4920 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties has been revised to D4920-13 developed by Committee D13.51, ASTM BOS Volume 07.02.
  • D4950 Standard Classification and Specification for Automotive Service Greases has been revised to D4950-13 developed by Committee D02.B0.04, ASTM BOS Volume 05.02.
  • D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids has been revised to D4998-13 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy has been revised to D5059-13 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons has been revised to D5194-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
  • D5246 Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water has been revised to D5246-13 developed by Committee D19.24, ASTM BOS Volume 11.02.
  • D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids has been reapproved, available as D5306-92(2013) developed by Committee D02.N0.06, ASTM BOS Volume 05.02.
  • D5362 Standard Test Method for Snagging Resistance of Fabrics (Bean Bag) has been revised to D5362-13 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography has been reapproved, available as D5441-98(2013) developed by Committee D02.04.0L, ASTM BOS Volume 05.02.
  • D5442 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography has been reapproved, available as D5442-93(2013) developed by Committee D02.04.0H, ASTM BOS Volume 05.02.
  • D5462 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water has been revised to D5462-13 developed by Committee D19.03, ASTM BOS Volume 11.02.
  • D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric) has been reapproved, available as D5482-07(2013) developed by Committee D02.08, ASTM BOS Volume 05.02.
  • D5538 Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations has been revised to D5538-13 developed by Committee D11.08, ASTM BOS Volume 09.01.
  • D5539 Standard Specification for Seed Starter Mix has been revised to D5539-13 developed by Committee D18.22, ASTM BOS Volume 04.08.
  • D5540 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis has been revised to D5540-13 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants has been revised to D5760-13 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration has been revised to D5776-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
  • D5781/D5781M Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices has been revised (with designation change) to D5781/D5781M-13 developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D5793 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings has been revised to D5793-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D5811 Standard Test Method for Strontium-90 in Water has been reapproved, available as D5811-08(2013) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D5823 Standard Test Method for Tuft Height of Pile Floor Coverings has been revised to D5823-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement) has been reapproved, available as D5849/D5849M-07R13e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings has been revised to D6037-13 developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D6160 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography has been reapproved, available as D6160-98(2013) developed by Committee D02.04.0L, ASTM BOS Volume 05.03.
  • D6243/D6243M Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method has been revised (with designation change) to D6243/D6243M-13a developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D6297 Standard Specification for Asphaltic Plug Joints for Bridges has been revised to D6297-13 developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D6301 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water has been revised to D6301-13 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils has been revised to D6426-13 developed by Committee D02.14, ASTM BOS Volume 05.03.
  • D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air has been revised (with title change) to D6539-13 developed by Committee D18.04, ASTM BOS Volume 04.09.
  • D6775 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material has been revised to D6775-13 developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps has been reapproved, available as D6813-02a(2013) developed by Committee D02.N0.07, ASTM BOS Volume 05.03.
  • D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils has been reapproved, available as D6823-08(2013) developed by Committee D02.P0, ASTM BOS Volume 05.03.
  • D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel has been revised to D6824-13 developed by Committee D02.J0.01, ASTM BOS Volume 05.03.
  • D6946/D6946M Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) has been reinstated as D6946/D6946M-13e1 developed by Committee D08.09, ASTM BOS Volume 04.04.
  • D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures has been reapproved, available as D6974-09(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7093 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome has been reinstated as D7093-13 developed by Committee D01.53, ASTM BOS Volume 06.02.
  • D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing has been revised to D7119/D7119M-13a developed by Committee D08.06, ASTM BOS Volume 04.04.
  • D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection has been revised to D7184-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
  • D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter has been revised to D7212-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7215 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels has been reapproved, available as D7215-08(2013) developed by Committee D02.04.0K, ASTM BOS Volume 05.04.
  • D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers has been revised to D7216-13 developed by Committee D02.B0.07, ASTM BOS Volume 05.04.
  • D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer has been revised to D7224-13 developed by Committee D02.J0.50, ASTM BOS Volume 05.04.
  • D7267 Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering has been revised to D7267-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection has been revised to D7284-13 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7311/D7311M Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane (Withdrawn 2013) has been withdrawn, with no replacement. D7311/D7311M-10 developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) has been reapproved, available as D7317-07(2013) developed by Committee D02.06, ASTM BOS Volume 05.04.
  • D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration has been revised to D7318-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography has been revised (with title change) to D7319-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7394 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers has been revised to D7394-13 developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications has been revised to D7425/D7425M-13 developed by Committee D08.06, ASTM BOS Volume 04.04.
  • D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels has been reapproved, available as D7451-08a(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing has been reapproved, available as D7464-08(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements has been revised to D7490-13 developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline has been revised (with title change) to D7547-13 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils has been revised to D7603-13 developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
  • D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel has been revised to D7618-13 developed by Committee D02.J0, ASTM BOS Volume 05.04.
  • D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction has been revised to D7621-13 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7722 Standard Terminology Relating to Industrial Textile Stitches and Seams has been revised to D7722-13 developed by Committee D13.54, ASTM BOS Volume 07.02.
  • D7811 Standard Test Method for Bow and Skew Using a Measuring Tool is a new standard, now available. D7811-13 developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D7829 Standard Guide for Sediment and Water Determination in Crude Oil is a new standard, now available. D7829-13 developed by Committee D02.02, ASTM BOS Volume 05.04.
  • D7835/D7835M Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine is a new standard, now available. D7835/D7835M-13 developed by Committee D01.53, ASTM BOS Volume 06.02.  
  • D7841 Standard Practice for Sustainable Laundry Best Management Practices is a new standard, now available. D7841-13 developed by Committee D13.40, ASTM BOS Volume 07.02.
  • D7846 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites is a new standard, now available. D7846-12 developed by Committee D02.F0, ASTM BOS Volume 05.04.
  • D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel is a new standard, now available. D7862-13 developed by Committee D02.A0, ASTM BOS Volume 05.04.
  • D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings is a new standard, now available. D7868-13 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants is a new standard, now available. D7876-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7878/D7878M Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P is a new standard, now available. D7878/D7878M-13 developed by Committee D13.55, ASTM BOS Volume 07.02.
  • E8/E8M Standard Test Methods for Tension Testing of Metallic Materials has been revised to E8/E8M-13a developed by Committee E28.04, ASTM BOS Volume 03.01.
  • E126 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers has been revised to E126-13 developed by Committee E20.05, ASTM BOS Volume 14.03.
  • E130 Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes (Withdrawn 2013) has been withdrawn, with no replacement. E130- developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness has been editorially changed, available as E140-12be1 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection has been revised to E329-13a developed by Committee E36.70, ASTM BOS Volume 04.02.
  • E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions has been editorially changed, available as E580/E580M-11be1 developed by Committee E33.04, ASTM BOS Volume 04.06.
  • E603 Standard Guide for Room Fire Experiments has been revised to E603-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E617 Standard Specification for Laboratory Weights and Precision Mass Standards has been revised to E617-13 developed by Committee E41.06, ASTM BOS Volume 14.04.
  • E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials has been revised to E662-13d developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E705 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237 has been revised to E705-13a developed by Committee E10.05, ASTM BOS Volume 12.02.
  • E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry has been reapproved, available as E826-08(2013) developed by Committee E01.22, ASTM BOS Volume 03.05.
  • E860 Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation has been reapproved, available as E860-07(2013) developed by Committee E30.11, ASTM BOS Volume 14.02.
  • E1020 Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation has been revised to E1020-13 developed by Committee E30.11, ASTM BOS Volume 14.02.
  • E1059 Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes (Withdrawn 2013) has been withdrawn, with no replacement. E1059- developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E1132 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica has been revised to E1132-13e1 developed by Committee E34.16, ASTM BOS Volume 11.03.
  • E1169 Standard Practice for Conducting Ruggedness Tests has been revised to E1169-13a developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E1363 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers has been revised to E1363-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies has been revised to E1529-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E1894 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources has been revised to E1894-13a developed by Committee E10.07, ASTM BOS Volume 12.02.
  • E1912 Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases (Withdrawn 2013) has been withdrawn, with no replacement. E1912-98(2004) developed by Committee E50.04, ASTM BOS Volume 11.05.
  • E2032 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119 has been reapproved, available as E2032-09(2013) developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2234 Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL has been reapproved, available as E2234-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies has been revised to E2257-13a developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E2278 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage (Withdrawn 2013) has been withdrawn, with no replacement. E2278-04 developed by Committee E50.03, ASTM BOS Volume 11.05.
  • E2282 Standard Guide for Defining the Test Result of a Test Method has been revised to E2282-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E2334 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample has been editorially changed, available as E2334-09(2013)e1 developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems has been reapproved, available as E2336-04(2013) developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2378 Standard Practice for the Recognition of Impaired or Retired Personal Property has been revised to E2378-13 developed by Committee E53.03, ASTM BOS Volume 04.12.
  • E2451 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples has been revised to E2451-13 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E2558 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces has been revised (with title change) to E2558-13 developed by Committee E06.54, ASTM BOS Volume 04.12.
  • E2560 Standard Specification for Data Format for Pavement Profile has been revised to E2560-13 developed by Committee E17.31, ASTM BOS Volume 04.03.
  • E2605 Standard Practice for Receiving Assets has been revised (with title change) to E2605-13 developed by Committee E53.01, ASTM BOS Volume 04.12.
  • E2607 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements has been reapproved, available as E2607-08(2013) developed by Committee E53.04, ASTM BOS Volume 04.12.
  • E2769 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading has been revised to E2769-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E2821 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers is a new standard, now available. E2821-13 developed by Committee E20.03, ASTM BOS Volume 14.03.
  • E2837 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies has been revised to E2837-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2916 Standard Terminology for Digital and Multimedia Evidence Examination is a new standard, now available. E2916-13 developed by Committee E30.12, ASTM BOS Volume 14.02.
  • E2931 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds is a new standard, now available. E2931-13 developed by Committee E27.05, ASTM BOS Volume 14.02.  
  • E2935 Standard Practice for Conducting Equivalence Testing in Laboratory Applications is a new standard, now available. E2935-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) has been revised to F67-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F118 Standard Definitions of Terms Relating to Gaskets has been revised to F118-13 developed by Committee F03.94, ASTM BOS Volume 09.02.
  • F148 Standard Test Method for Binder Durability of Cork Composition Gasket Materials has been revised to F148-13 developed by Committee F03.40, ASTM BOS Volume 09.02.
  • F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings has been revised to F405-13 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners has been revised to F608-13 developed by Committee F11.21, ASTM BOS Volume 15.08.
  • F846 Standard Guide for Testing Performance of Amusement Rides and Devices (Withdrawn 2013) has been withdrawn, with no replacement. F846-92(2009) developed by Committee F24.10, ASTM BOS Volume 15.07.
  • F851 Standard Test Method for Self-Rising Seat Mechanisms has been reapproved, available as F851-87(2013) developed by Committee F15.23, ASTM BOS Volume 1ss

    Issue 53 – September 2013

    To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

    • A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished has been revised to A108-13 developed by Committee A01.15, ASTM BOS Volume 01.05.
    • A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel has been revised to A242/A242M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
    • A328/A328M Standard Specification for Steel Sheet Piling has been revised to A328/A328M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
    • A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use has been editorially changed, available as A668/A668M-13e1 developed by Committee A01.06, ASTM BOS Volume 01.05.
    • A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements has been revised to A830/A830M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
    • A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement has been revised to A970/A970M-13a developed by Committee A01.05, ASTM BOS Volume 01.04.
    • A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement has been revised to A1035/A1035M-13a developed by Committee A01.05, ASTM BOS Volume 01.04.
    • A1086 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types is a new standard, now available. A1086-13 developed by Committee A06.02, ASTM BOS Volume 03.04.
    • B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture has been reapproved, available as B37-08(2013) developed by Committee B07.01, ASTM BOS Volume 02.02.
    • B85/B85M Standard Specification for Aluminum-Alloy Die Castings has been editorially changed, available as B85/B85M-10e1 developed by Committee B07.01, ASTM BOS Volume 02.02.
    • B106 Standard Test Methods for Flexivity of Thermostat Metals has been reapproved, available as B106-08(2013) developed by Committee B02.10, ASTM BOS Volume 02.04.
    • B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes has been editorially changed, available as B179-11e1 developed by Committee B07.01, ASTM BOS Volume 02.02.
    • B223 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method) has been reapproved, available as B223-08(2013) developed by Committee B02.10, ASTM BOS Volume 02.04.
    • B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube has been editorially changed, available as B241/B241M-12e1 developed by Committee B07.03, ASTM BOS Volume 02.02.
    • B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought has been reapproved, available as B275-05(2013) developed by Committee B02.04, ASTM BOS Volume 02.04.
    • B381 Standard Specification for Titanium and Titanium Alloy Forgings has been revised to B381-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) has been reapproved, available as B539-02(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B773 Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies (Withdrawn 2013) has been withdrawn, with no replacement. B773- developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications has been reapproved, available as B812-96(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts has been reapproved, available as B845-97(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe has been revised to B861-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe has been revised to B862-13a developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B863 Standard Specification for Titanium and Titanium Alloy Wire has been revised to B863-13a developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B871 Standard Test Method for Tear Testing of Aluminum Alloy Products has been reapproved, available as B871-01(2013) developed by Committee B07.05, ASTM BOS Volume 02.02.
    • B977 Standard Specification for Titanium and Titanium Ingots has been revised to B977-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile has been revised to C67-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate has been revised to C88-13 developed by Committee C09.20, ASTM BOS Volume 04.02.
    • C94/C94M Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-13a developed by Committee C09.40, ASTM BOS Volume 04.02.
    • C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement has been editorially changed, available as C114-11be1 developed by Committee C01.23, ASTM BOS Volume 04.01.
    • C125 Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-13a developed by Committee C09.91, ASTM BOS Volume 04.02.
    • C140/C140M Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units has been revised (with designation change) to C140/C140M-13a developed by Committee C15.03, ASTM BOS Volume 04.05.
    • C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores has been revised to C174/C174M-13 developed by Committee C09.69, ASTM BOS Volume 04.02.
    • C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory has been revised to C192/C192M-13 developed by Committee C09.61, ASTM BOS Volume 04.02.
    • C219 Standard Terminology Relating to Hydraulic Cement has been revised to C219-13 developed by Committee C01.91, ASTM BOS Volume 04.01.
    • C232/C232M Standard Test Method for Bleeding of Concrete has been revised to C232/C232M-13a developed by Committee C09.60, ASTM BOS Volume 04.02.
    • C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid has been reapproved, available as C400-98(2013) developed by Committee C07.05, ASTM BOS Volume 04.01.
    • C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite has been reapproved, available as C492-92(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
    • C544 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain has been reapproved, available as C544-03(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
    • C645 Standard Specification for Nonstructural Steel Framing Members has been revised to C645-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
    • C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials has been revised to C670-13 developed by Committee C09.94, ASTM BOS Volume 04.02.
    • C688 Standard Specification for Functional Additions for Use in Hydraulic Cements has been editorially changed, available as C688-08e1 developed by Committee C01.20, ASTM BOS Volume 04.01.
    • C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes? has been reapproved, available as C831-98(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
    • C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear has been revised to C882/C882M-13 developed by Committee C09.25, ASTM BOS Volume 04.02.
    • C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar has been revised to C887-13 developed by Committee C12.06, ASTM BOS Volume 04.05.
    • C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering has been reapproved, available as C932-06(2013) developed by Committee C11.02, ASTM BOS Volume 04.01.
    • C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer has been revised to C1057-12 developed by Committee C16.30, ASTM BOS Volume 04.06.
    • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation has been revised to C1077-13b developed by Committee C09.98, ASTM BOS Volume 04.02.
    • C1093 Standard Practice for Accreditation of Testing Agencies for Masonry has been revised to C1093-13 developed by Committee C15.07, ASTM BOS Volume 04.05.
    • C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts has been reapproved, available as C1381/C1381M-97(2013) developed by Committee C11.01, ASTM BOS Volume 04.01.
    • C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars has been revised to C1403-13 developed by Committee C12.02, ASTM BOS Volume 04.05.
    • C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design has been revised to C1417-13 developed by Committee C13.05, ASTM BOS Volume 04.05.
    • C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) has been revised to C1417M-13a developed by Committee C13.05, ASTM BOS Volume 04.05.
    • C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers has been revised to C1433-13b developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) has been revised to C1433M-13b developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1437 Standard Test Method for Flow of Hydraulic Cement Mortar has been revised to C1437-13 developed by Committee C01.22, ASTM BOS Volume 04.01.
    • C1456 Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF) has been revised to C1456-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
    • C1463 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis has been revised to C1463-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
    • C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains has been revised to C1504-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric) has been revised to C1504M-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD has been revised to C1577-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1597M Standard Specification for Gypsum Wallboard (Hard Metric Sizes) (Withdrawn 2013) has been withdrawn, with no replacement. C1597M- developed by Committee C11.01, ASTM BOS Volume 04.01.
    • C1670 Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units is a new standard, now available. C1670-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
    • C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete has been revised to C1761/C1761M-13a developed by Committee C09.21, ASTM BOS Volume 04.02.
    • C1764 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications is a new standard, now available. C1764-12 developed by Committee C11.02, ASTM BOS Volume 04.01.
    • C1766 Standard Specification for Factory-Laminated Gypsum Panel Products is a new standard, now available. C1766-13 developed by Committee C11.01, ASTM BOS Volume 04.01.
    • D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester has been revised to D93-13 developed by Committee D02.08, ASTM BOS Volume 05.01.
    • D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation has been revised to D95-13 developed by Committee D02.02, ASTM BOS Volume 05.01.
    • D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) has been revised to D129-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D187 Standard Test Method for Burning Quality of Kerosine has been reapproved, available as D187-08(2013) developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D482 Standard Test Method for Ash from Petroleum Products has been revised to D482-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D519 Standard Test Method for Length of Fiber in Wool Top has been reapproved, available as D519-04(2013) developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D613 Standard Test Method for Cetane Number of Diesel Fuel Oil has been editorially changed, available as D613-10ae1 developed by Committee D02.01, ASTM BOS Volume 05.05.
    • D646 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) has been reinstated as D646-13 developed by Committee D13.19, ASTM BOS Volume 07.01.
    • D861 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns has been reapproved, available as D861-07(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives has been revised to D874-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D888 Standard Test Methods for Dissolved Oxygen in Water has been editorially changed, available as D888-12e1 developed by Committee D19.05, ASTM BOS Volume 11.01.
    • D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline has been editorially changed, available as D909-07(2012)e1 developed by Committee D02.01, ASTM BOS Volume 05.05.
    • D1006/D1006M Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood has been revised (with designation change) to D1006/D1006M-13 developed by Committee D01.27, ASTM BOS Volume 06.01.
    • D1094 Standard Test Method for Water Reaction of Aviation Fuels has been reapproved, available as D1094-07(2013) developed by Committee D02.J0.05, ASTM BOS Volume 05.01.
    • D1109 Standard Test Method for 1% Sodium Hydroxide Solubility of Wood has been reapproved, available as D1109-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
    • D1113 Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool has been revised to D1113-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1165 Standard Nomenclature of Commercial Hardwoods and Softwoods has been revised to D1165-13 developed by Committee D07.91, ASTM BOS Volume 04.10.
    • D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials has been reapproved, available as D1166-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
    • D1234 Standard Test Method of Sampling and Testing Staple Length of Grease Wool has been revised to D1234-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer has been revised to D1238-13 developed by Committee D20.30, ASTM BOS Volume 08.01.
    • D1252 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water has been editorially changed, available as D1252-06(2012)e1 developed by Committee D19.06, ASTM BOS Volume 11.02.
    • D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method) has been revised to D1266-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels has been reapproved, available as D1405/D1405M-08(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
    • D1422/D1422M Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method has been revised (with designation change) to D1422/D1422M-13 developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D1424 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus has been reapproved, available as D1424-09(2013) developed by Committee D13.60, ASTM BOS Volume 07.01.
    • D1429 Standard Test Methods for Specific Gravity of Water and Brine has been revised to D1429-13 developed by Committee D19.05, ASTM BOS Volume 11.01.
    • D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics has been revised to D1499-13 developed by Committee D20.50, ASTM BOS Volume 08.01.
    • D1574 Standard Test Method for Extractable Matter in Wool and Other Animal Fibers has been reapproved, available as D1574-04(2013) developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1575 Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver has been revised to D1575-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1576 Standard Test Method for Moisture in Wool by Oven-Drying has been revised to D1576-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1762 Standard Test Method for Chemical Analysis of Wood Charcoal has been reapproved, available as D1762-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
    • D1765 Standard Classification System for Carbon Blacks Used in Rubber Products has been revised to D1765-13 developed by Committee D24.41, ASTM BOS Volume 09.01.
    • D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) has been editorially changed, available as D1796-11e1 developed by Committee D02.02, ASTM BOS Volume 05.01.
    • D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks has been revised to D1985-13 developed by Committee D04.33, ASTM BOS Volume 04.03.  
    • D2068 Standard Test Method for Determining Filter Blocking Tendency has been revised to D2068-13 developed by Committee D02.14, ASTM BOS Volume 05.01.
    • D2130 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection has been revised to D2130-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2157 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels has been reapproved, available as D2157-94(2013) developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards has been revised to D2162-13 developed by Committee D02.07, ASTM BOS Volume 05.01.
    • D2255/D2255M Standard Test Method for Grading Spun Yarns for Appearance has been reapproved, available as D2255/D2255M-09(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D2260 Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems has been reapproved, available as D2260-03(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch has been reapproved, available as D2318-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
    • D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) has been reapproved, available as D2319/D2319M-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
    • D2414 Standard Test Method for Carbon Black—Oil Absorption Number (OAN) has been revised to D2414-13 developed by Committee D24.11, ASTM BOS Volume 09.01.
    • D2421 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis has been revised to D2421-13 developed by Committee D02.H0, ASTM BOS Volume 05.01.
    • D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System has been reapproved, available as D2422-97(2013) developed by Committee D02.L0.11, ASTM BOS Volume 05.01.
    • D2462 Standard Test Method for Moisture in Wool by Distillation With Toluene has been revised to D2462-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2520 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC has been reinstated as D2520-13 developed by Committee D09.12, ASTM BOS Volume 10.02.
    • D2524 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18-in. (3.2-mm) Gage Length has been revised to D2524-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2525 Standard Practice for Sampling Wool for Moisture has been revised to D2525-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils has been reapproved, available as D2603-01(2013) developed by Committee D02.07, ASTM BOS Volume 05.01.
    • D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures has been revised (with designation change) to D2726/D2726M-13 developed by Committee D04.21, ASTM BOS Volume 04.03.
    • D2880 Standard Specification for Gas Turbine Fuel Oils has been revised to D2880-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D2890 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels has been reapproved, available as D2890-92(2013) developed by Committee D02.04.0K, ASTM BOS Volume 05.01.
    • D2968 Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection has been revised to D2968-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils has been reapproved, available as D2982-07(2013) developed by Committee D02.06, ASTM BOS Volume 05.01.
    • D3136 Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products has been revised to D3136-13 developed by Committee D13.62, ASTM BOS Volume 07.01.
    • D3149 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation has been reapproved, available as D3149-06(2013) developed by Committee D09.07, ASTM BOS Volume 10.02.
    • D3201/D3201M Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products has been revised (with designation change) to D3201/D3201M-13 developed by Committee D07.07, ASTM BOS Volume 04.10.
    • D3217/D3217M Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations has been revised (with designation change) to D3217/D3217M-13 developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) has been revised to D3227-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D3493 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) has been revised to D3493-13 developed by Committee D24.11, ASTM BOS Volume 09.01.
    • D3655 Standard Performance Specification for Men's and Women's Sliver Knitted Overcoat and Jacket Fabrics has been revised to D3655-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3782 Standard Performance Specification for Men's and Boys' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics has been revised to D3782-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3785 Standard Performance Specification for Woven Necktie and Scarf Fabrics has been revised to D3785-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3862 Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality has been reinstated, with revision to D3862-13 developed by Committee D19.08, ASTM BOS Volume 11.01.
    • D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer has been revised to D3948-13 developed by Committee D02.J0.05, ASTM BOS Volume 05.02.
    • D3994 Standard Performance Specification for Woven Swimwear Fabrics has been revised to D3994-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3995 Standard Performance Specification for Men's and Women's Knitted Career Apparel Fabrics: Dress and Vocational has been revised to D3995-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3996 Standard Performance Specification for Knit Swimwear Fabrics has been revised to D3996-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D4006 Standard Test Method for Water in Crude Oil by Distillation has been editorially changed, available as D4006-11(2012)e1 developed by Committee D02.02, ASTM BOS Volume 05.02.
    • D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) has been editorially changed, available as D4007-11e1 developed by Committee D02.02, ASTM BOS Volume 05.02.
    • D4025 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection has been reapproved, available as D4025-08a(2013) developed by Committee D19.05, ASTM BOS Volume 11.02.
    • D4035 Standard Performance Specification for Knitted Necktie and Scarf Fabrics has been revised to D4035-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method has been revised to D4047-13 developed by Committee D02.03, ASTM BOS Volume 05.02.
    • D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch has been reapproved, available as D4072-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
    • D4157 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) has been revised to D4157-13 developed by Committee D13.60, ASTM BOS Volume 07.01.
    • D4193 Standard Test Method for Thiocyanate in Water has been editorially changed, available as D4193-08(2013)e1 developed by Committee D19.06, ASTM BOS Volume 11.02.
    • D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics has been revised (with title change) to D4329-13 developed by Committee D20.50, ASTM BOS Volume 08.03.
    • D4364 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight has been revised to D4364-13 developed by Committee D20.50, ASTM BOS Volume 08.02.
    • D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst has been revised to D4365-13 developed by Committee D32.01, ASTM BOS Volume 05.05.
    • D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method has been reapproved, available as D4567-03(2013) developed by Committee D32.01, ASTM BOS Volume 05.05.
    • D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch has been reapproved, available as D4616-95(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
    • D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration has been reapproved, available as D4746-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
    • D4785 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water has been editorially changed, available as D4785-08(2013)e1 developed by Committee D19.04, ASTM BOS Volume 11.02.
    • D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption has been revised to D4824-13 developed by Committee D32.01, ASTM BOS Volume 05.05.
    • D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents has been editorially changed, available as D4841-88(2013)e1 developed by Committee D19.02, ASTM BOS Volume 11.01.
    • D4850 Standard Terminology Relating to Fabrics and Fabric Test Methods has been revised to D4850-13 developed by Committee D13.59, ASTM BOS Volume 07.02.
    • D4920 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties has been revised to D4920-13 developed by Committee D13.51, ASTM BOS Volume 07.02.
    • D4950 Standard Classification and Specification for Automotive Service Greases has been revised to D4950-13 developed by Committee D02.B0.04, ASTM BOS Volume 05.02.
    • D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids has been revised to D4998-13 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
    • D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy has been revised to D5059-13 developed by Committee D02.03, ASTM BOS Volume 05.02.
    • D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons has been revised to D5194-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
    • D5246 Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water has been revised to D5246-13 developed by Committee D19.24, ASTM BOS Volume 11.02.
    • D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids has been reapproved, available as D5306-92(2013) developed by Committee D02.N0.06, ASTM BOS Volume 05.02.
    • D5362 Standard Test Method for Snagging Resistance of Fabrics (Bean Bag) has been revised to D5362-13 developed by Committee D13.59, ASTM BOS Volume 07.02.
    • D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography has been reapproved, available as D5441-98(2013) developed by Committee D02.04.0L, ASTM BOS Volume 05.02.
    • D5442 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography has been reapproved, available as D5442-93(2013) developed by Committee D02.04.0H, ASTM BOS Volume 05.02.
    • D5462 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water has been revised to D5462-13 developed by Committee D19.03, ASTM BOS Volume 11.02.
    • D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric) has been reapproved, available as D5482-07(2013) developed by Committee D02.08, ASTM BOS Volume 05.02.
    • D5538 Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations has been revised to D5538-13 developed by Committee D11.08, ASTM BOS Volume 09.01.
    • D5539 Standard Specification for Seed Starter Mix has been revised to D5539-13 developed by Committee D18.22, ASTM BOS Volume 04.08.
    • D5540 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis has been revised to D5540-13 developed by Committee D19.03, ASTM BOS Volume 11.01.
    • D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants has been revised to D5760-13 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
    • D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration has been revised to D5776-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
    • D5781/D5781M Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices has been revised (with designation change) to D5781/D5781M-13 developed by Committee D18.21, ASTM BOS Volume 04.08.
    • D5793 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings has been revised to D5793-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
    • D5811 Standard Test Method for Strontium-90 in Water has been reapproved, available as D5811-08(2013) developed by Committee D19.04, ASTM BOS Volume 11.02.
    • D5823 Standard Test Method for Tuft Height of Pile Floor Coverings has been revised to D5823-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
    • D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement) has been reapproved, available as D5849/D5849M-07R13e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
    • D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings has been revised to D6037-13 developed by Committee D01.23, ASTM BOS Volume 06.01.
    • D6160 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography has been reapproved, available as D6160-98(2013) developed by Committee D02.04.0L, ASTM BOS Volume 05.03.
    • D6243/D6243M Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method has been revised (with designation change) to D6243/D6243M-13a developed by Committee D35.04, ASTM BOS Volume 04.13.
    • D6297 Standard Specification for Asphaltic Plug Joints for Bridges has been revised to D6297-13 developed by Committee D04.32, ASTM BOS Volume 04.03.
    • D6301 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water has been revised to D6301-13 developed by Committee D19.03, ASTM BOS Volume 11.01.
    • D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils has been revised to D6426-13 developed by Committee D02.14, ASTM BOS Volume 05.03.
    • D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air has been revised (with title change) to D6539-13 developed by Committee D18.04, ASTM BOS Volume 04.09.
    • D6775 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material has been revised to D6775-13 developed by Committee D13.60, ASTM BOS Volume 07.02.
    • D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps has been reapproved, available as D6813-02a(2013) developed by Committee D02.N0.07, ASTM BOS Volume 05.03.
    • D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils has been reapproved, available as D6823-08(2013) developed by Committee D02.P0, ASTM BOS Volume 05.03.
    • D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel has been revised to D6824-13 developed by Committee D02.J0.01, ASTM BOS Volume 05.03.
    • D6946/D6946M Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) has been reinstated as D6946/D6946M-13e1 developed by Committee D08.09, ASTM BOS Volume 04.04.
    • D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures has been reapproved, available as D6974-09(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7093 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome has been reinstated as D7093-13 developed by Committee D01.53, ASTM BOS Volume 06.02.
    • D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing has been revised to D7119/D7119M-13a developed by Committee D08.06, ASTM BOS Volume 04.04.
    • D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection has been revised to D7184-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
    • D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter has been revised to D7212-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7215 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels has been reapproved, available as D7215-08(2013) developed by Committee D02.04.0K, ASTM BOS Volume 05.04.
    • D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers has been revised to D7216-13 developed by Committee D02.B0.07, ASTM BOS Volume 05.04.
    • D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer has been revised to D7224-13 developed by Committee D02.J0.50, ASTM BOS Volume 05.04.
    • D7267 Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering has been revised to D7267-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
    • D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection has been revised to D7284-13 developed by Committee D19.06, ASTM BOS Volume 11.02.
    • D7311/D7311M Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane (Withdrawn 2013) has been withdrawn, with no replacement. D7311/D7311M-10 developed by Committee D08.18, ASTM BOS Volume 04.04.
    • D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) has been reapproved, available as D7317-07(2013) developed by Committee D02.06, ASTM BOS Volume 05.04.
    • D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration has been revised to D7318-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography has been revised (with title change) to D7319-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7394 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers has been revised to D7394-13 developed by Committee D01.24, ASTM BOS Volume 06.01.
    • D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications has been revised to D7425/D7425M-13 developed by Committee D08.06, ASTM BOS Volume 04.04.
    • D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels has been reapproved, available as D7451-08a(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing has been reapproved, available as D7464-08(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements has been revised to D7490-13 developed by Committee D01.23, ASTM BOS Volume 06.01.
    • D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline has been revised (with title change) to D7547-13 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
    • D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils has been revised to D7603-13 developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
    • D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel has been revised to D7618-13 developed by Committee D02.J0, ASTM BOS Volume 05.04.
    • D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction has been revised to D7621-13 developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7722 Standard Terminology Relating to Industrial Textile Stitches and Seams has been revised to D7722-13 developed by Committee D13.54, ASTM BOS Volume 07.02.
    • D7811 Standard Test Method for Bow and Skew Using a Measuring Tool is a new standard, now available. D7811-13 developed by Committee D13.60, ASTM BOS Volume 07.02.
    • D7829 Standard Guide for Sediment and Water Determination in Crude Oil is a new standard, now available. D7829-13 developed by Committee D02.02, ASTM BOS Volume 05.04.
    • D7835/D7835M Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine is a new standard, now available. D7835/D7835M-13 developed by Committee D01.53, ASTM BOS Volume 06.02.  
    • D7841 Standard Practice for Sustainable Laundry Best Management Practices is a new standard, now available. D7841-13 developed by Committee D13.40, ASTM BOS Volume 07.02.
    • D7846 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites is a new standard, now available. D7846-12 developed by Committee D02.F0, ASTM BOS Volume 05.04.
    • D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel is a new standard, now available. D7862-13 developed by Committee D02.A0, ASTM BOS Volume 05.04.
    • D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings is a new standard, now available. D7868-13 developed by Committee D01.46, ASTM BOS Volume 06.02.
    • D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants is a new standard, now available. D7876-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7878/D7878M Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P is a new standard, now available. D7878/D7878M-13 developed by Committee D13.55, ASTM BOS Volume 07.02.
    • E8/E8M Standard Test Methods for Tension Testing of Metallic Materials has been revised to E8/E8M-13a developed by Committee E28.04, ASTM BOS Volume 03.01.
    • E126 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers has been revised to E126-13 developed by Committee E20.05, ASTM BOS Volume 14.03.
    • E130 Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes (Withdrawn 2013) has been withdrawn, with no replacement. E130- developed by Committee E01.20, ASTM BOS Volume 03.05.
    • E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness has been editorially changed, available as E140-12be1 developed by Committee E28.06, ASTM BOS Volume 03.01.
    • E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection has been revised to E329-13a developed by Committee E36.70, ASTM BOS Volume 04.02.
    • E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions has been editorially changed, available as E580/E580M-11be1 developed by Committee E33.04, ASTM BOS Volume 04.06.
    • E603 Standard Guide for Room Fire Experiments has been revised to E603-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
    • E617 Standard Specification for Laboratory Weights and Precision Mass Standards has been revised to E617-13 developed by Committee E41.06, ASTM BOS Volume 14.04.
    • E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials has been revised to E662-13d developed by Committee E05.21, ASTM BOS Volume 04.07.
    • E705 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237 has been revised to E705-13a developed by Committee E10.05, ASTM BOS Volume 12.02.
    • E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry has been reapproved, available as E826-08(2013) developed by Committee E01.22, ASTM BOS Volume 03.05.
    • E860 Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation has been reapproved, available as E860-07(2013) developed by Committee E30.11, ASTM BOS Volume 14.02.
    • E1020 Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation has been revised to E1020-13 developed by Committee E30.11, ASTM BOS Volume 14.02.
    • E1059 Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes (Withdrawn 2013) has been withdrawn, with no replacement. E1059- developed by Committee E01.20, ASTM BOS Volume 03.05.
    • E1132 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica has been revised to E1132-13e1 developed by Committee E34.16, ASTM BOS Volume 11.03.
    • E1169 Standard Practice for Conducting Ruggedness Tests has been revised to E1169-13a developed by Committee E11.20, ASTM BOS Volume 14.02.
    • E1363 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers has been revised to E1363-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
    • E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies has been revised to E1529-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E1894 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources has been revised to E1894-13a developed by Committee E10.07, ASTM BOS Volume 12.02.
    • E1912 Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases (Withdrawn 2013) has been withdrawn, with no replacement. E1912-98(2004) developed by Committee E50.04, ASTM BOS Volume 11.05.
    • E2032 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119 has been reapproved, available as E2032-09(2013) developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E2234 Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL has been reapproved, available as E2234-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
    • E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies has been revised to E2257-13a developed by Committee E05.21, ASTM BOS Volume 04.07.
    • E2278 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage (Withdrawn 2013) has been withdrawn, with no replacement. E2278-04 developed by Committee E50.03, ASTM BOS Volume 11.05.
    • E2282 Standard Guide for Defining the Test Result of a Test Method has been revised to E2282-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
    • E2334 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample has been editorially changed, available as E2334-09(2013)e1 developed by Committee E11.30, ASTM BOS Volume 14.02.
    • E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems has been reapproved, available as E2336-04(2013) developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E2378 Standard Practice for the Recognition of Impaired or Retired Personal Property has been revised to E2378-13 developed by Committee E53.03, ASTM BOS Volume 04.12.
    • E2451 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples has been revised to E2451-13 developed by Committee E30.01, ASTM BOS Volume 14.02.
    • E2558 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces has been revised (with title change) to E2558-13 developed by Committee E06.54, ASTM BOS Volume 04.12.
    • E2560 Standard Specification for Data Format for Pavement Profile has been revised to E2560-13 developed by Committee E17.31, ASTM BOS Volume 04.03.
    • E2605 Standard Practice for Receiving Assets has been revised (with title change) to E2605-13 developed by Committee E53.01, ASTM BOS Volume 04.12.
    • E2607 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements has been reapproved, available as E2607-08(2013) developed by Committee E53.04, ASTM BOS Volume 04.12.
    • E2769 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading has been revised to E2769-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
    • E2821 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers is a new standard, now available. E2821-13 developed by Committee E20.03, ASTM BOS Volume 14.03.
    • E2837 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies has been revised to E2837-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E2916 Standard Terminology for Digital and Multimedia Evidence Examination is a new standard, now available. E2916-13 developed by Committee E30.12, ASTM BOS Volume 14.02.
    • E2931 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds is a new standard, now available. E2931-13 developed by Committee E27.05, ASTM BOS Volume 14.02.  
    • E2935 Standard Practice for Conducting Equivalence Testing in Laboratory Applications is a new standard, now available. E2935-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
    • F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) has been revised to F67-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
    • F118 Standard Definitions of Terms Relating to Gaskets has been revised to F118-13 developed by Committee F03.94, ASTM BOS Volume 09.02.
    • F148 Standard Test Method for Binder Durability of Cork Composition Gasket Materials has been revised to F148-13 developed by Committee F03.40, ASTM BOS Volume 09.02.
    • F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings has been revised to F405-13 developed by Committee F17.65, ASTM BOS Volume 08.04.
    • F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners has been revised to F608-13 developed by Committee F11.21, ASTM BOS Volume 15.08.
    • F846 Standard Guide for Testing Performance of Amusement Rides and Devices (Withdrawn 2013) has been withdrawn, with no replacement. F846-92(2009) developed by Committee F24.10, ASTM BOS Volume 15.07.
    • F851 Standard Test Method for Self-Rising Seat Mechanisms has been reapproved, available as F851-87(2013) developed by Committee F15.23, ASTM BOS Volume 15.11.
    • F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing has been revised to F876-13a developed by Committee F17.26, ASTM BOS Volume 08.04.
    • F883 Standard Performance Specification for Padlocks has been revised to F883-13 developed by Committee F12.50, ASTM BOS Volume 15.08.
    • F964 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing has been revised to F964-13 developed by Committee F14.30, ASTM BOS Volume 01.06.
    • F1002 Standard Performance Specification for Protective Clothing and the Materials from Which It Is Made for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards has been revised to F1002-13 developed by Committee F23.80, ASTM BOS Volume 11.03.
    • F1061 Standard Specification for Ski Binding Test Devices has been reapproved, available as F1061-08(2013) developed by Committee F27.10, ASTM BOS Volume 15.07.
    • F1062 Standard Test Method for Verification of Ski Binding Test Devices has been reapproved, available as F1062-97(2013) developed by Committee F27.10, ASTM BOS Volume 15.07.
    • F1149 Standard Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services has been reapproved, available as F1149-93(2013) developed by Committee F30.03, ASTM BOS Volume 13.02.
    • F1250 Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers has been revised to F1250-13 developed by Committee F08.30, ASTM BOS Volume 15.07.
    • F1352 Standard Guide for Fixed Blade Broadhead Performance and Safety Standards has been reapproved, available as F1352-08(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
    • F1361 Standard Test Method for Performance of Open Deep Fat Fryers has been reapproved, available as F1361-07(2013) developed by Committee F26.06, ASTM BOS Volume 15.12.
    • F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) has been revised to F1377-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
    • F1435 Standard Specification for Designation of the Balance Point Location for Archery Arrows has been reapproved, available as F1435-08(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
    • F1494 Standard Terminology Relating to Protective Clothing has been revised to F1494-13 developed by Committee F23.91, ASTM BOS Volume 11.03.
    • F1586/F1586M Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) has been editorially changed, available as F1586/F1586M-13e1 developed by Committee F04.12, ASTM BOS Volume 13.01.
    • F1648 Standard Test Methods for Archery Bowstring Component—Serving String Material has been reapproved, available as F1648-95(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
    • F1675 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits has been revised to F1675-13 developed by Committee F17.62, ASTM BOS Volume 08.04.
    • F1690 Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013) has been withdrawn, with no replacement. F1690-96(2004) developed by Committee F29.14, ASTM BOS Volume 13.02.
    • F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings has been revised to F1866-13 developed by Committee F17.63, ASTM BOS Volume 08.04.
    • F1949 Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles has been reapproved, available as F1949-99(2013) developed by Committee F30.01, ASTM BOS Volume 13.02.
    • F1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems has been editorially changed, available as F1970-12e1 developed by Committee F17.10, ASTM BOS Volume 08.04.
    • F1989 Standard Specification for Cooking Fire Suppression Blankets has been reapproved, available as F1989-05(2013) developed by Committee F15.46, ASTM BOS Volume 15.11.
    • F2050 Standard Consumer Safety Specification for Hand-Held Infant Carriers has been revised to F2050-13 developed by Committee F15.21, ASTM BOS Volume 15.11.
    • F2087 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick has been revised to F2087-13 developed by Committee F25.02, ASTM BOS Volume 01.07.
    • F2148 Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA) has been revised to F2148-13 developed by Committee F04.16, ASTM BOS Volume 13.01.
    • F2319 Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013) has been withdrawn, with no replacement. F2319-04 developed by Committee F30.01, ASTM BOS Volume 13.02.
    • F2523 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers has been revised to F2523-13 developed by Committee F03.70, ASTM BOS Volume 09.02.
    • F2601 Standard Specification for Fire Safety for Candle Accessories has been revised to F2601-13 developed by Committee F15.45, ASTM BOS Volume 15.11.
    • F2650 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment has been revised to F2650-13 developed by Committee F08.80, ASTM BOS Volume 15.07.
    • F2687 Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment has been revised to F2687-13 developed by Committee F26.05, ASTM BOS Volume 15.12.
    • F2723 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation has been revised to F2723-13a developed by Committee F04.22, ASTM BOS Volume 13.02.
    • F2817 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair has been revised to F2817-13 developed by Committee F17.60, ASTM BOS Volume 08.04.
    • F2940 Standard Practice for Air Soft Field Operation is a new standard, now available. F2940-13 developed by Committee F08.27, ASTM BOS Volume 15.07.
    • F2941 Standard Practice for Air Soft Player Safety Briefing is a new standard, now available. F2941-13 developed by Committee F08.27, ASTM BOS Volume 15.07.
    • F2949 Standard Specification for Pole Vault Box Collars has been editorially changed, available as F2949-12e1 developed by Committee F08.67, ASTM BOS Volume 15.07.
    • F2966 Standard Guide for Snow and Ice Control for Walkway Surfaces is a new standard, now available. F2966-13 developed by Committee F13.50, ASTM BOS Volume 15.07.
    • F2976 Standard Practice for Determining the Field Performance of Commercial Kitchen Demand Control Ventilation Systems has been revised to F2976-13 developed by Committee F26.07, ASTM BOS Volume 15.12.
    • F2983 Standard Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats is a new standard, now available. F2983-13 developed by Committee F08.12, ASTM BOS Volume 15.07.
    • F2996 Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems is a new standard, now available. F2996-13 developed by Committee F04.22, ASTM BOS Volume 13.02.
    • F3006 Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing is a new standard, now available. F3006-13 developed by Committee F12.10, ASTM BOS Volume 15.08.
    • F3007 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass is a new standard, now available. F3007-13 developed by Committee F12.10, ASTM BOS Volume 15.08.
    • F3011 Standard Specification for Performance of Angle of Attack System is a new standard, now available. F3011-13 developed by Committee F39.03, ASTM BOS Volume 15.11.
    • F3023 Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers is a new standard, now available. F3023-13 developed by Committee F08.30, ASTM BOS Volume 15.07.
    • G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements has been editorially changed, available as G5-13e1 developed by Committee G01.11, ASTM BOS Volume 03.02.
    • G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) has been reapproved, available as G96-90(2013) developed by Committee G01.11, ASTM BOS Volume 03.02.
    • G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests has been revised to G117-13 developed by Committee G02.20, ASTM BOS Volume 03.02.
    • G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials has been revised to G152-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
    • G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials has been revised to G153-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
    • G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials has been revised to G155-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
    • G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation has been reapproved, available as G189-07(2013) developed by Committee G01.11, ASTM BOS Volume 03.02.
    • G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser has been revised (with title change) to G195-13 developed by Committee G02.30, ASTM BOS Volume 03.02.

     

    r electrical appliances. Safety. Particular requirements for appliances for clothes dryers and towel rails
    Superseded by BS EN 60335-2-43:2003+A2:2008
  • BS EN 60335-2-60:2003Specification for safety of household and similar electrical appliances. Particular requirements for whirlpool baths and whirlpool spas
    Superseded by BS EN 60335-2-60:2003+A2:2008
  • BS EN 60335-2-60:2003+A2:2008Household and similar electrical appliances. Safety. Particular requirements for whirlpool baths and whirlpool spas
    Superseded by BS EN 60335-2-60:2003+A12:2010
  • BS EN 60335-2-61:2003Specification for safety of household and similar electrical appliances. Particular requirements for thermal-storage room heaters
    Superseded by BS EN 60335-2-61:2003+A2:2008
  • BS EN 60335-2-98:2003 Specification for safety of household and similar electrical appliances. Particular requirements for humidifiers
    Superseded by BS EN 60335-2-98:2003+A2:2008
  • BS ISO 6261:2011Tool holders with cylindrical shank (boring bars) for indexable inserts. Designation
    Superseded by BS ISO 5609-1:2012
  • PD ISO/IEC TR 15504-6:2008 Information technology. Process assessment. An exemplar system life cycle process assessment model
    Superseded by BS ISO/IEC 15504-6:2013
  • DD CLC/TS 50217:2005 Guide for in situ measurements. In situ measurement of disturbance emission
    Superseded by BS EN 55016-2-3:2010
  • DD IEC/TS 62239:2008Process management for avionics. Preparation of an electronic components management plan
    Superseded by PD IEC/TS 62239-1:2012
  • DD CLC/TS 62441:2007Accidentally caused candle flame ignition for audio/video, communication and information technology equipment
    Superseded by PD CLC/TS 62441:2012
  • BS Z 17:2000 (ISO 15887:2000) Space data and information transfer systems. Data systems. Lossless data compression
    Superseded by BS ISO 15887:2013
  • BS 2HR 650:2011Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)
    Superseded by BS EN 2398:2008
ittee E35.15, ASTM BOS Volume 11.05.
  • E1142 Standard Terminology Relating to Thermophysical Properties has been revised to E1142-13 developed by Committee E37.03, ASTM BOS Volume 14.02.
  • E1169 Standard Practice for Conducting Ruggedness Tests has been revised to E1169-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E1170 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces has been reapproved, available as E1170-97(2012) developed by Committee E17.33, ASTM BOS Volume 04.03.
  • E1221 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels has been revised to E1221-12a developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter has been revised to E1354-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E1434 Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases has been reapproved, available as E1434-00(2013) developed by Committee D30.01, ASTM BOS Volume 15.03.
  • E1457 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals has been revised to E1457-13 developed by Committee E08.06, ASTM BOS Volume 03.01.
  • E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers has been reapproved, available as E1477-98a(2013) developed by Committee E12.02, ASTM BOS Volume 06.01.
  • E1517 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova has been revised to E1517-13 developed by Committee E35.12, ASTM BOS Volume 11.05.
  • E1537 Standard Test Method for Fire Testing of Upholstered Furniture has been revised to E1537-13 developed by Committee E05.15, ASTM BOS Volume 04.07.
  • E1554/E1554M Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization has been revised (with designation change) to E1554/E1554M-13 developed by Committee E06.41, ASTM BOS Volume 04.11.
  • E1590 Standard Test Method for Fire Testing of Mattresses has been revised to E1590-13 developed by Committee E05.15, ASTM BOS Volume 04.07.
  • E1591 Standard Guide for Obtaining Data for Fire Growth Models has been revised to E1591-13 developed by Committee E05.33, ASTM BOS Volume 04.07.
  • E1593 Standard Guide for Assessing the Efficacy of Air Care Products in Reducing the Perception of Indoor Malodor has been revised (with title change) to E1593-13 developed by Committee E18.07, ASTM BOS Volume 15.08.
  • E1600 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry has been revised to E1600-13 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1822 Standard Test Method for Fire Testing of Stacked Chairs has been revised to E1822-13 developed by Committee E05.15, ASTM BOS Volume 04.07.
  • E1823 Standard Terminology Relating to Fatigue and Fracture Testing has been revised to E1823-13 developed by Committee E08.02, ASTM BOS Volume 03.01.
  • E1839 Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime has been revised to E1839-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E1849 Standard Guide for Fish and Wildlife Incident Monitoring and Reporting has been reapproved, available as E1849-96(2013) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E1867 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers has been revised to E1867-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E1993 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs has been revised (with designation change) to E1993/E1993M-98(2013)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E2011 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand has been revised to E2011-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2102 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater has been revised to E2102-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E2103/E2103M Standard Classification for Bridge Elements—UNIFORMAT II has been revised (with designation change) to E2103/E2103M-13 developed by Committee E06.81, ASTM BOS Volume 04.11.
  • E2230 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material has been revised to E2230-13 developed by Committee E05.17, ASTM BOS Volume 04.07.
  • E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies has been revised to E2257-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact has been editorially changed, available as E2404-13e1 developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E2455 Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels has been reapproved, available as E2455-06(2013) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E2551 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers has been revised to E2551-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E2554 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques has been revised (with title change) to E2554-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E2579 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics has been revised to E2579-13 developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E2647 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow has been revised to E2647-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2772 Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences has been editorially changed, available as E2772-13e1 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2810 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units has been editorially changed, available as E2810-11e1 developed by Committee E55.03, ASTM BOS Volume 14.02.
  • E2856 Standard Guide for Estimation of LNAPL Transmissivity has been revised to E2856-13 developed by Committee E50.04, ASTM BOS Volume 11.05.
  • E2870 Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling is a new standard, now available. E2870-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • F15 Standard Specification for Iron-Nickel-Cobalt Sealing Alloy has been reapproved, available as F15-04(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F37 Standard Test Methods for Sealability of Gasket Materials has been reapproved, available as F37-06(2013) developed by Committee F03.10, ASTM BOS Volume 09.02.
  • F73 Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps has been reapproved, available as F73-96(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F83 Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters has been reapproved, available as F83-71(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F85 Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes has been reapproved, available as F85-76(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F112 Standard Test Method for Sealability of Enveloped Gaskets has been reapproved, available as F112-00(2013) developed by Committee F03.10, ASTM BOS Volume 09.02.
  • F148 Standard Test Method for Binder Durability of Cork Composition Gasket Materials has been reapproved, available as F148-02(2013) developed by Committee F03.40, ASTM BOS Volume 09.02.
  • F204 Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire has been reapproved, available as F204-76(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F219 Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps has been reapproved, available as F219-96(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F373 Standard Test Method for Embossed Depth of Resilient Floor Coverings has been revised to F373-13 developed by Committee F06.20, ASTM BOS Volume 15.04.
  • F406 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards has been revised to F406-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F430 Standard Specification for Paper Used for Vacuum Cleaner Filter Bags has been revised to F430-13 developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F467 Standard Specification for Nonferrous Nuts for General Use has been revised to F467-13 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F615M Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric) has been reapproved, available as F615M-95(2013) developed by Committee F01.11, ASTM BOS Volume 10.04.
  • F783 Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung has been reapproved, available as F783-88(2013) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact has been revised to F842-13 developed by Committee E06.51, ASTM BOS Volume 04.12.
  • F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing has been revised to F876-13 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F887 Standard Specifications for Personal Climbing Equipment has been revised to F887-13 developed by Committee F18.15, ASTM BOS Volume 10.03.
  • F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring has been revised to F925-13 developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F1011 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel has been reapproved, available as F1011-07(2013) developed by Committee F20.21, ASTM BOS Volume 11.05.
  • F1127 Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel has been reapproved, available as F1127-07(2013) developed by Committee F20.22, ASTM BOS Volume 11.05.
  • F1169 Standard Consumer Safety Specification for Full-Size Baby Cribs has been revised to F1169-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F1196 Standard Specification for Sliding Watertight Door Assemblies has been reapproved, available as F1196-00(2013) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F1244 Standard Specification for Berths, Marine has been reapproved, available as F1244-08(2013) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F1265 Standard Test Method for Resistance to Impact for Resilient Floor Tile has been reapproved, available as F1265-03a(2013) developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F1344 Standard Specification for Rubber Floor Tile has been editorially changed, available as F1344-12e1 developed by Committee F06.80, ASTM BOS Volume 15.04.
  • F1514 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change has been reapproved, available as F1514-03(2013) developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F1516 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended) has been revised to F1516-13 developed by Committee F06.40, ASTM BOS Volume 15.04.
  • F1524 Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills has been reapproved, available as F1524-95(2013) developed by Committee F20.22, ASTM BOS Volume 11.05.
  • F1564 Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers has been revised to F1564-13 developed by Committee F18.35, ASTM BOS Volume 10.03.
  • F1565 Standard Specification for Pressure-Reducing Valves for Steam Service has been reapproved, available as F1565-00(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1567 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers has been reapproved, available as F1567-94(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1600 Standard Terminology Relating to Bioremediation has been reapproved, available as F1600-95(2013) developed by Committee F20.24, ASTM BOS Volume 11.05.
  • F1685 Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems has

    Issue 53 – September 2013

    To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

    • A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished has been revised to A108-13 developed by Committee A01.15, ASTM BOS Volume 01.05.
    • A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel has been revised to A242/A242M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
    • A328/A328M Standard Specification for Steel Sheet Piling has been revised to A328/A328M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
    • A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use has been editorially changed, available as A668/A668M-13e1 developed by Committee A01.06, ASTM BOS Volume 01.05.
    • A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements has been revised to A830/A830M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
    • A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement has been revised to A970/A970M-13a developed by Committee A01.05, ASTM BOS Volume 01.04.
    • A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement has been revised to A1035/A1035M-13a developed by Committee A01.05, ASTM BOS Volume 01.04.
    • A1086 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types is a new standard, now available. A1086-13 developed by Committee A06.02, ASTM BOS Volume 03.04.
    • B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture has been reapproved, available as B37-08(2013) developed by Committee B07.01, ASTM BOS Volume 02.02.
    • B85/B85M Standard Specification for Aluminum-Alloy Die Castings has been editorially changed, available as B85/B85M-10e1 developed by Committee B07.01, ASTM BOS Volume 02.02.
    • B106 Standard Test Methods for Flexivity of Thermostat Metals has been reapproved, available as B106-08(2013) developed by Committee B02.10, ASTM BOS Volume 02.04.
    • B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes has been editorially changed, available as B179-11e1 developed by Committee B07.01, ASTM BOS Volume 02.02.
    • B223 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method) has been reapproved, available as B223-08(2013) developed by Committee B02.10, ASTM BOS Volume 02.04.
    • B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube has been editorially changed, available as B241/B241M-12e1 developed by Committee B07.03, ASTM BOS Volume 02.02.
    • B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought has been reapproved, available as B275-05(2013) developed by Committee B02.04, ASTM BOS Volume 02.04.
    • B381 Standard Specification for Titanium and Titanium Alloy Forgings has been revised to B381-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts) has been reapproved, available as B539-02(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B773 Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies (Withdrawn 2013) has been withdrawn, with no replacement. B773- developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications has been reapproved, available as B812-96(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts has been reapproved, available as B845-97(2013) developed by Committee B02.11, ASTM BOS Volume 02.04.
    • B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe has been revised to B861-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe has been revised to B862-13a developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B863 Standard Specification for Titanium and Titanium Alloy Wire has been revised to B863-13a developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B871 Standard Test Method for Tear Testing of Aluminum Alloy Products has been reapproved, available as B871-01(2013) developed by Committee B07.05, ASTM BOS Volume 02.02.
    • B977 Standard Specification for Titanium and Titanium Ingots has been revised to B977-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile has been revised to C67-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate has been revised to C88-13 developed by Committee C09.20, ASTM BOS Volume 04.02.
    • C94/C94M Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-13a developed by Committee C09.40, ASTM BOS Volume 04.02.
    • C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement has been editorially changed, available as C114-11be1 developed by Committee C01.23, ASTM BOS Volume 04.01.
    • C125 Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-13a developed by Committee C09.91, ASTM BOS Volume 04.02.
    • C140/C140M Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units has been revised (with designation change) to C140/C140M-13a developed by Committee C15.03, ASTM BOS Volume 04.05.
    • C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores has been revised to C174/C174M-13 developed by Committee C09.69, ASTM BOS Volume 04.02.
    • C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory has been revised to C192/C192M-13 developed by Committee C09.61, ASTM BOS Volume 04.02.
    • C219 Standard Terminology Relating to Hydraulic Cement has been revised to C219-13 developed by Committee C01.91, ASTM BOS Volume 04.01.
    • C232/C232M Standard Test Method for Bleeding of Concrete has been revised to C232/C232M-13a developed by Committee C09.60, ASTM BOS Volume 04.02.
    • C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid has been reapproved, available as C400-98(2013) developed by Committee C07.05, ASTM BOS Volume 04.01.
    • C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite has been reapproved, available as C492-92(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
    • C544 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain has been reapproved, available as C544-03(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
    • C645 Standard Specification for Nonstructural Steel Framing Members has been revised to C645-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
    • C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials has been revised to C670-13 developed by Committee C09.94, ASTM BOS Volume 04.02.
    • C688 Standard Specification for Functional Additions for Use in Hydraulic Cements has been editorially changed, available as C688-08e1 developed by Committee C01.20, ASTM BOS Volume 04.01.
    • C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes? has been reapproved, available as C831-98(2013) developed by Committee C08.04, ASTM BOS Volume 15.01.
    • C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear has been revised to C882/C882M-13 developed by Committee C09.25, ASTM BOS Volume 04.02.
    • C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar has been revised to C887-13 developed by Committee C12.06, ASTM BOS Volume 04.05.
    • C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering has been reapproved, available as C932-06(2013) developed by Committee C11.02, ASTM BOS Volume 04.01.
    • C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer has been revised to C1057-12 developed by Committee C16.30, ASTM BOS Volume 04.06.
    • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation has been revised to C1077-13b developed by Committee C09.98, ASTM BOS Volume 04.02.
    • C1093 Standard Practice for Accreditation of Testing Agencies for Masonry has been revised to C1093-13 developed by Committee C15.07, ASTM BOS Volume 04.05.
    • C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts has been reapproved, available as C1381/C1381M-97(2013) developed by Committee C11.01, ASTM BOS Volume 04.01.
    • C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars has been revised to C1403-13 developed by Committee C12.02, ASTM BOS Volume 04.05.
    • C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design has been revised to C1417-13 developed by Committee C13.05, ASTM BOS Volume 04.05.
    • C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) has been revised to C1417M-13a developed by Committee C13.05, ASTM BOS Volume 04.05.
    • C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers has been revised to C1433-13b developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) has been revised to C1433M-13b developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1437 Standard Test Method for Flow of Hydraulic Cement Mortar has been revised to C1437-13 developed by Committee C01.22, ASTM BOS Volume 04.01.
    • C1456 Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF) has been revised to C1456-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
    • C1463 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis has been revised to C1463-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
    • C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains has been revised to C1504-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric) has been revised to C1504M-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD has been revised to C1577-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
    • C1597M Standard Specification for Gypsum Wallboard (Hard Metric Sizes) (Withdrawn 2013) has been withdrawn, with no replacement. C1597M- developed by Committee C11.01, ASTM BOS Volume 04.01.
    • C1670 Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units is a new standard, now available. C1670-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
    • C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete has been revised to C1761/C1761M-13a developed by Committee C09.21, ASTM BOS Volume 04.02.
    • C1764 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications is a new standard, now available. C1764-12 developed by Committee C11.02, ASTM BOS Volume 04.01.
    • C1766 Standard Specification for Factory-Laminated Gypsum Panel Products is a new standard, now available. C1766-13 developed by Committee C11.01, ASTM BOS Volume 04.01.
    • D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester has been revised to D93-13 developed by Committee D02.08, ASTM BOS Volume 05.01.
    • D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation has been revised to D95-13 developed by Committee D02.02, ASTM BOS Volume 05.01.
    • D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) has been revised to D129-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D187 Standard Test Method for Burning Quality of Kerosine has been reapproved, available as D187-08(2013) developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D482 Standard Test Method for Ash from Petroleum Products has been revised to D482-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D519 Standard Test Method for Length of Fiber in Wool Top has been reapproved, available as D519-04(2013) developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D613 Standard Test Method for Cetane Number of Diesel Fuel Oil has been editorially changed, available as D613-10ae1 developed by Committee D02.01, ASTM BOS Volume 05.05.
    • D646 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) has been reinstated as D646-13 developed by Committee D13.19, ASTM BOS Volume 07.01.
    • D861 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns has been reapproved, available as D861-07(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives has been revised to D874-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D888 Standard Test Methods for Dissolved Oxygen in Water has been editorially changed, available as D888-12e1 developed by Committee D19.05, ASTM BOS Volume 11.01.
    • D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline has been editorially changed, available as D909-07(2012)e1 developed by Committee D02.01, ASTM BOS Volume 05.05.
    • D1006/D1006M Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood has been revised (with designation change) to D1006/D1006M-13 developed by Committee D01.27, ASTM BOS Volume 06.01.
    • D1094 Standard Test Method for Water Reaction of Aviation Fuels has been reapproved, available as D1094-07(2013) developed by Committee D02.J0.05, ASTM BOS Volume 05.01.
    • D1109 Standard Test Method for 1% Sodium Hydroxide Solubility of Wood has been reapproved, available as D1109-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
    • D1113 Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool has been revised to D1113-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1165 Standard Nomenclature of Commercial Hardwoods and Softwoods has been revised to D1165-13 developed by Committee D07.91, ASTM BOS Volume 04.10.
    • D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials has been reapproved, available as D1166-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
    • D1234 Standard Test Method of Sampling and Testing Staple Length of Grease Wool has been revised to D1234-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer has been revised to D1238-13 developed by Committee D20.30, ASTM BOS Volume 08.01.
    • D1252 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water has been editorially changed, available as D1252-06(2012)e1 developed by Committee D19.06, ASTM BOS Volume 11.02.
    • D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method) has been revised to D1266-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels has been reapproved, available as D1405/D1405M-08(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
    • D1422/D1422M Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method has been revised (with designation change) to D1422/D1422M-13 developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D1424 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus has been reapproved, available as D1424-09(2013) developed by Committee D13.60, ASTM BOS Volume 07.01.
    • D1429 Standard Test Methods for Specific Gravity of Water and Brine has been revised to D1429-13 developed by Committee D19.05, ASTM BOS Volume 11.01.
    • D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics has been revised to D1499-13 developed by Committee D20.50, ASTM BOS Volume 08.01.
    • D1574 Standard Test Method for Extractable Matter in Wool and Other Animal Fibers has been reapproved, available as D1574-04(2013) developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1575 Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver has been revised to D1575-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1576 Standard Test Method for Moisture in Wool by Oven-Drying has been revised to D1576-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D1762 Standard Test Method for Chemical Analysis of Wood Charcoal has been reapproved, available as D1762-84(2013) developed by Committee D07.01, ASTM BOS Volume 04.10.
    • D1765 Standard Classification System for Carbon Blacks Used in Rubber Products has been revised to D1765-13 developed by Committee D24.41, ASTM BOS Volume 09.01.
    • D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) has been editorially changed, available as D1796-11e1 developed by Committee D02.02, ASTM BOS Volume 05.01.
    • D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks has been revised to D1985-13 developed by Committee D04.33, ASTM BOS Volume 04.03.  
    • D2068 Standard Test Method for Determining Filter Blocking Tendency has been revised to D2068-13 developed by Committee D02.14, ASTM BOS Volume 05.01.
    • D2130 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection has been revised to D2130-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2157 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels has been reapproved, available as D2157-94(2013) developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards has been revised to D2162-13 developed by Committee D02.07, ASTM BOS Volume 05.01.
    • D2255/D2255M Standard Test Method for Grading Spun Yarns for Appearance has been reapproved, available as D2255/D2255M-09(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D2260 Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems has been reapproved, available as D2260-03(2013) developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch has been reapproved, available as D2318-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
    • D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method) has been reapproved, available as D2319/D2319M-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.01.
    • D2414 Standard Test Method for Carbon Black—Oil Absorption Number (OAN) has been revised to D2414-13 developed by Committee D24.11, ASTM BOS Volume 09.01.
    • D2421 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis has been revised to D2421-13 developed by Committee D02.H0, ASTM BOS Volume 05.01.
    • D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System has been reapproved, available as D2422-97(2013) developed by Committee D02.L0.11, ASTM BOS Volume 05.01.
    • D2462 Standard Test Method for Moisture in Wool by Distillation With Toluene has been revised to D2462-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2520 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC has been reinstated as D2520-13 developed by Committee D09.12, ASTM BOS Volume 10.02.
    • D2524 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18-in. (3.2-mm) Gage Length has been revised to D2524-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2525 Standard Practice for Sampling Wool for Moisture has been revised to D2525-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils has been reapproved, available as D2603-01(2013) developed by Committee D02.07, ASTM BOS Volume 05.01.
    • D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures has been revised (with designation change) to D2726/D2726M-13 developed by Committee D04.21, ASTM BOS Volume 04.03.
    • D2880 Standard Specification for Gas Turbine Fuel Oils has been revised to D2880-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D2890 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels has been reapproved, available as D2890-92(2013) developed by Committee D02.04.0K, ASTM BOS Volume 05.01.
    • D2968 Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection has been revised to D2968-13 developed by Committee D13.13, ASTM BOS Volume 07.01.
    • D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils has been reapproved, available as D2982-07(2013) developed by Committee D02.06, ASTM BOS Volume 05.01.
    • D3136 Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products has been revised to D3136-13 developed by Committee D13.62, ASTM BOS Volume 07.01.
    • D3149 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation has been reapproved, available as D3149-06(2013) developed by Committee D09.07, ASTM BOS Volume 10.02.
    • D3201/D3201M Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products has been revised (with designation change) to D3201/D3201M-13 developed by Committee D07.07, ASTM BOS Volume 04.10.
    • D3217/D3217M Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations has been revised (with designation change) to D3217/D3217M-13 developed by Committee D13.58, ASTM BOS Volume 07.01.
    • D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) has been revised to D3227-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D3493 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN) has been revised to D3493-13 developed by Committee D24.11, ASTM BOS Volume 09.01.
    • D3655 Standard Performance Specification for Men's and Women's Sliver Knitted Overcoat and Jacket Fabrics has been revised to D3655-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3782 Standard Performance Specification for Men's and Boys' Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics has been revised to D3782-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3785 Standard Performance Specification for Woven Necktie and Scarf Fabrics has been revised to D3785-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3862 Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality has been reinstated, with revision to D3862-13 developed by Committee D19.08, ASTM BOS Volume 11.01.
    • D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer has been revised to D3948-13 developed by Committee D02.J0.05, ASTM BOS Volume 05.02.
    • D3994 Standard Performance Specification for Woven Swimwear Fabrics has been revised to D3994-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3995 Standard Performance Specification for Men's and Women's Knitted Career Apparel Fabrics: Dress and Vocational has been revised to D3995-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D3996 Standard Performance Specification for Knit Swimwear Fabrics has been revised to D3996-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D4006 Standard Test Method for Water in Crude Oil by Distillation has been editorially changed, available as D4006-11(2012)e1 developed by Committee D02.02, ASTM BOS Volume 05.02.
    • D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) has been editorially changed, available as D4007-11e1 developed by Committee D02.02, ASTM BOS Volume 05.02.
    • D4025 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection has been reapproved, available as D4025-08a(2013) developed by Committee D19.05, ASTM BOS Volume 11.02.
    • D4035 Standard Performance Specification for Knitted Necktie and Scarf Fabrics has been revised to D4035-13 developed by Committee D13.61, ASTM BOS Volume 07.01.
    • D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method has been revised to D4047-13 developed by Committee D02.03, ASTM BOS Volume 05.02.
    • D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch has been reapproved, available as D4072-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
    • D4157 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method) has been revised to D4157-13 developed by Committee D13.60, ASTM BOS Volume 07.01.
    • D4193 Standard Test Method for Thiocyanate in Water has been editorially changed, available as D4193-08(2013)e1 developed by Committee D19.06, ASTM BOS Volume 11.02.
    • D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics has been revised (with title change) to D4329-13 developed by Committee D20.50, ASTM BOS Volume 08.03.
    • D4364 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight has been revised to D4364-13 developed by Committee D20.50, ASTM BOS Volume 08.02.
    • D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst has been revised to D4365-13 developed by Committee D32.01, ASTM BOS Volume 05.05.
    • D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method has been reapproved, available as D4567-03(2013) developed by Committee D32.01, ASTM BOS Volume 05.05.
    • D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch has been reapproved, available as D4616-95(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
    • D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration has been reapproved, available as D4746-98(2013) developed by Committee D02.05, ASTM BOS Volume 05.02.
    • D4785 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water has been editorially changed, available as D4785-08(2013)e1 developed by Committee D19.04, ASTM BOS Volume 11.02.
    • D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption has been revised to D4824-13 developed by Committee D32.01, ASTM BOS Volume 05.05.
    • D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents has been editorially changed, available as D4841-88(2013)e1 developed by Committee D19.02, ASTM BOS Volume 11.01.
    • D4850 Standard Terminology Relating to Fabrics and Fabric Test Methods has been revised to D4850-13 developed by Committee D13.59, ASTM BOS Volume 07.02.
    • D4920 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties has been revised to D4920-13 developed by Committee D13.51, ASTM BOS Volume 07.02.
    • D4950 Standard Classification and Specification for Automotive Service Greases has been revised to D4950-13 developed by Committee D02.B0.04, ASTM BOS Volume 05.02.
    • D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids has been revised to D4998-13 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
    • D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy has been revised to D5059-13 developed by Committee D02.03, ASTM BOS Volume 05.02.
    • D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons has been revised to D5194-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
    • D5246 Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water has been revised to D5246-13 developed by Committee D19.24, ASTM BOS Volume 11.02.
    • D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids has been reapproved, available as D5306-92(2013) developed by Committee D02.N0.06, ASTM BOS Volume 05.02.
    • D5362 Standard Test Method for Snagging Resistance of Fabrics (Bean Bag) has been revised to D5362-13 developed by Committee D13.59, ASTM BOS Volume 07.02.
    • D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography has been reapproved, available as D5441-98(2013) developed by Committee D02.04.0L, ASTM BOS Volume 05.02.
    • D5442 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography has been reapproved, available as D5442-93(2013) developed by Committee D02.04.0H, ASTM BOS Volume 05.02.
    • D5462 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water has been revised to D5462-13 developed by Committee D19.03, ASTM BOS Volume 11.02.
    • D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric) has been reapproved, available as D5482-07(2013) developed by Committee D02.08, ASTM BOS Volume 05.02.
    • D5538 Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations has been revised to D5538-13 developed by Committee D11.08, ASTM BOS Volume 09.01.
    • D5539 Standard Specification for Seed Starter Mix has been revised to D5539-13 developed by Committee D18.22, ASTM BOS Volume 04.08.
    • D5540 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis has been revised to D5540-13 developed by Committee D19.03, ASTM BOS Volume 11.01.
    • D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants has been revised to D5760-13 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
    • D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration has been revised to D5776-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
    • D5781/D5781M Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices has been revised (with designation change) to D5781/D5781M-13 developed by Committee D18.21, ASTM BOS Volume 04.08.
    • D5793 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings has been revised to D5793-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
    • D5811 Standard Test Method for Strontium-90 in Water has been reapproved, available as D5811-08(2013) developed by Committee D19.04, ASTM BOS Volume 11.02.
    • D5823 Standard Test Method for Tuft Height of Pile Floor Coverings has been revised to D5823-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
    • D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement) has been reapproved, available as D5849/D5849M-07R13e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
    • D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings has been revised to D6037-13 developed by Committee D01.23, ASTM BOS Volume 06.01.
    • D6160 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography has been reapproved, available as D6160-98(2013) developed by Committee D02.04.0L, ASTM BOS Volume 05.03.
    • D6243/D6243M Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method has been revised (with designation change) to D6243/D6243M-13a developed by Committee D35.04, ASTM BOS Volume 04.13.
    • D6297 Standard Specification for Asphaltic Plug Joints for Bridges has been revised to D6297-13 developed by Committee D04.32, ASTM BOS Volume 04.03.
    • D6301 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water has been revised to D6301-13 developed by Committee D19.03, ASTM BOS Volume 11.01.
    • D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils has been revised to D6426-13 developed by Committee D02.14, ASTM BOS Volume 05.03.
    • D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air has been revised (with title change) to D6539-13 developed by Committee D18.04, ASTM BOS Volume 04.09.
    • D6775 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material has been revised to D6775-13 developed by Committee D13.60, ASTM BOS Volume 07.02.
    • D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps has been reapproved, available as D6813-02a(2013) developed by Committee D02.N0.07, ASTM BOS Volume 05.03.
    • D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils has been reapproved, available as D6823-08(2013) developed by Committee D02.P0, ASTM BOS Volume 05.03.
    • D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel has been revised to D6824-13 developed by Committee D02.J0.01, ASTM BOS Volume 05.03.
    • D6946/D6946M Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) has been reinstated as D6946/D6946M-13e1 developed by Committee D08.09, ASTM BOS Volume 04.04.
    • D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures has been reapproved, available as D6974-09(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7093 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome has been reinstated as D7093-13 developed by Committee D01.53, ASTM BOS Volume 06.02.
    • D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing has been revised to D7119/D7119M-13a developed by Committee D08.06, ASTM BOS Volume 04.04.
    • D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection has been revised to D7184-13 developed by Committee D16.04, ASTM BOS Volume 06.04.
    • D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter has been revised to D7212-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7215 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels has been reapproved, available as D7215-08(2013) developed by Committee D02.04.0K, ASTM BOS Volume 05.04.
    • D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers has been revised to D7216-13 developed by Committee D02.B0.07, ASTM BOS Volume 05.04.
    • D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer has been revised to D7224-13 developed by Committee D02.J0.50, ASTM BOS Volume 05.04.
    • D7267 Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering has been revised to D7267-13 developed by Committee D13.21, ASTM BOS Volume 07.02.
    • D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection has been revised to D7284-13 developed by Committee D19.06, ASTM BOS Volume 11.02.
    • D7311/D7311M Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane (Withdrawn 2013) has been withdrawn, with no replacement. D7311/D7311M-10 developed by Committee D08.18, ASTM BOS Volume 04.04.
    • D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) has been reapproved, available as D7317-07(2013) developed by Committee D02.06, ASTM BOS Volume 05.04.
    • D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration has been revised to D7318-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography has been revised (with title change) to D7319-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7394 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers has been revised to D7394-13 developed by Committee D01.24, ASTM BOS Volume 06.01.
    • D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications has been revised to D7425/D7425M-13 developed by Committee D08.06, ASTM BOS Volume 04.04.
    • D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels has been reapproved, available as D7451-08a(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing has been reapproved, available as D7464-08(2013) developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements has been revised to D7490-13 developed by Committee D01.23, ASTM BOS Volume 06.01.
    • D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline has been revised (with title change) to D7547-13 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
    • D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils has been revised to D7603-13 developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
    • D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel has been revised to D7618-13 developed by Committee D02.J0, ASTM BOS Volume 05.04.
    • D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction has been revised to D7621-13 developed by Committee D02.14, ASTM BOS Volume 05.04.
    • D7722 Standard Terminology Relating to Industrial Textile Stitches and Seams has been revised to D7722-13 developed by Committee D13.54, ASTM BOS Volume 07.02.
    • D7811 Standard Test Method for Bow and Skew Using a Measuring Tool is a new standard, now available. D7811-13 developed by Committee D13.60, ASTM BOS Volume 07.02.
    • D7829 Standard Guide for Sediment and Water Determination in Crude Oil is a new standard, now available. D7829-13 developed by Committee D02.02, ASTM BOS Volume 05.04.
    • D7835/D7835M Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine is a new standard, now available. D7835/D7835M-13 developed by Committee D01.53, ASTM BOS Volume 06.02.  
    • D7841 Standard Practice for Sustainable Laundry Best Management Practices is a new standard, now available. D7841-13 developed by Committee D13.40, ASTM BOS Volume 07.02.
    • D7846 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites is a new standard, now available. D7846-12 developed by Committee D02.F0, ASTM BOS Volume 05.04.
    • D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel is a new standard, now available. D7862-13 developed by Committee D02.A0, ASTM BOS Volume 05.04.
    • D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings is a new standard, now available. D7868-13 developed by Committee D01.46, ASTM BOS Volume 06.02.
    • D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants is a new standard, now available. D7876-13 developed by Committee D02.03, ASTM BOS Volume 05.04.
    • D7878/D7878M Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P is a new standard, now available. D7878/D7878M-13 developed by Committee D13.55, ASTM BOS Volume 07.02.
    • E8/E8M Standard Test Methods for Tension Testing of Metallic Materials has been revised to E8/E8M-13a developed by Committee E28.04, ASTM BOS Volume 03.01.
    • E126 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers has been revised to E126-13 developed by Committee E20.05, ASTM BOS Volume 14.03.
    • E130 Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes (Withdrawn 2013) has been withdrawn, with no replacement. E130- developed by Committee E01.20, ASTM BOS Volume 03.05.
    • E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness has been editorially changed, available as E140-12be1 developed by Committee E28.06, ASTM BOS Volume 03.01.
    • E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection has been revised to E329-13a developed by Committee E36.70, ASTM BOS Volume 04.02.
    • E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions has been editorially changed, available as E580/E580M-11be1 developed by Committee E33.04, ASTM BOS Volume 04.06.
    • E603 Standard Guide for Room Fire Experiments has been revised to E603-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
    • E617 Standard Specification for Laboratory Weights and Precision Mass Standards has been revised to E617-13 developed by Committee E41.06, ASTM BOS Volume 14.04.
    • E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials has been revised to E662-13d developed by Committee E05.21, ASTM BOS Volume 04.07.
    • E705 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237 has been revised to E705-13a developed by Committee E10.05, ASTM BOS Volume 12.02.
    • E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry has been reapproved, available as E826-08(2013) developed by Committee E01.22, ASTM BOS Volume 03.05.
    • E860 Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation has been reapproved, available as E860-07(2013) developed by Committee E30.11, ASTM BOS Volume 14.02.
    • E1020 Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation has been revised to E1020-13 developed by Committee E30.11, ASTM BOS Volume 14.02.
    • E1059 Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes (Withdrawn 2013) has been withdrawn, with no replacement. E1059- developed by Committee E01.20, ASTM BOS Volume 03.05.
    • E1132 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica has been revised to E1132-13e1 developed by Committee E34.16, ASTM BOS Volume 11.03.
    • E1169 Standard Practice for Conducting Ruggedness Tests has been revised to E1169-13a developed by Committee E11.20, ASTM BOS Volume 14.02.
    • E1363 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers has been revised to E1363-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
    • E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies has been revised to E1529-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E1894 Standard Guide for Selecting Dosimetry Systems for Application in Pulsed X-Ray Sources has been revised to E1894-13a developed by Committee E10.07, ASTM BOS Volume 12.02.
    • E1912 Standard Guide for Accelerated Site Characterization for Confirmed or Suspected Petroleum Releases (Withdrawn 2013) has been withdrawn, with no replacement. E1912-98(2004) developed by Committee E50.04, ASTM BOS Volume 11.05.
    • E2032 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119 has been reapproved, available as E2032-09(2013) developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E2234 Standard Practice for Sampling a Stream of Product by Attributes Indexed by AQL has been reapproved, available as E2234-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
    • E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies has been revised to E2257-13a developed by Committee E05.21, ASTM BOS Volume 04.07.
    • E2278 Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage (Withdrawn 2013) has been withdrawn, with no replacement. E2278-04 developed by Committee E50.03, ASTM BOS Volume 11.05.
    • E2282 Standard Guide for Defining the Test Result of a Test Method has been revised to E2282-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
    • E2334 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample has been editorially changed, available as E2334-09(2013)e1 developed by Committee E11.30, ASTM BOS Volume 14.02.
    • E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems has been reapproved, available as E2336-04(2013) developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E2378 Standard Practice for the Recognition of Impaired or Retired Personal Property has been revised to E2378-13 developed by Committee E53.03, ASTM BOS Volume 04.12.
    • E2451 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples has been revised to E2451-13 developed by Committee E30.01, ASTM BOS Volume 14.02.
    • E2558 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces has been revised (with title change) to E2558-13 developed by Committee E06.54, ASTM BOS Volume 04.12.
    • E2560 Standard Specification for Data Format for Pavement Profile has been revised to E2560-13 developed by Committee E17.31, ASTM BOS Volume 04.03.
    • E2605 Standard Practice for Receiving Assets has been revised (with title change) to E2605-13 developed by Committee E53.01, ASTM BOS Volume 04.12.
    • E2607 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements has been reapproved, available as E2607-08(2013) developed by Committee E53.04, ASTM BOS Volume 04.12.
    • E2769 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading has been revised to E2769-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
    • E2821 Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers is a new standard, now available. E2821-13 developed by Committee E20.03, ASTM BOS Volume 14.03.
    • E2837 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies has been revised to E2837-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E2916 Standard Terminology for Digital and Multimedia Evidence Examination is a new standard, now available. E2916-13 developed by Committee E30.12, ASTM BOS Volume 14.02.
    • E2931 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds is a new standard, now available. E2931-13 developed by Committee E27.05, ASTM BOS Volume 14.02.  
    • E2935 Standard Practice for Conducting Equivalence Testing in Laboratory Applications is a new standard, now available. E2935-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
    • F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700) has been revised to F67-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
    • F118 Standard Definitions of Terms Relating to Gaskets has been revised to F118-13 developed by Committee F03.94, ASTM BOS Volume 09.02.
    • F148 Standard Test Method for Binder Durability of Cork Composition Gasket Materials has been revised to F148-13 developed by Committee F03.40, ASTM BOS Volume 09.02.
    • F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings has been revised to F405-13 developed by Committee F17.65, ASTM BOS Volume 08.04.
    • F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners has been revised to F608-13 developed by Committee F11.21, ASTM BOS Volume 15.08.
    • F846 Standard Guide for Testing Performance of Amusement Rides and Devices (Withdrawn 2013) has been withdrawn, with no replacement. F846-92(2009) developed by Committee F24.10, ASTM BOS Volume 15.07.
    • F851 Standard Test Method for Self-Rising Seat Mechanisms has been reapproved, available as F851-87(2013) developed by Committee F15.23, ASTM BOS Volume 15.11.
    • F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing has been revised to F876-13a developed by Committee F17.26, ASTM BOS Volume 08.04.
    • F883 Standard Performance Specification for Padlocks has been revised to F883-13 developed by Committee F12.50, ASTM BOS Volume 15.08.
    • F964 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing has been revised to F964-13 developed by Committee F14.30, ASTM BOS Volume 01.06.
    • F1002 Standard Performance Specification for Protective Clothing and the Materials from Which It Is Made for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards has been revised to F1002-13 developed by Committee F23.80, ASTM BOS Volume 11.03.
    • F1061 Standard Specification for Ski Binding Test Devices has been reapproved, available as F1061-08(2013) developed by Committee F27.10, ASTM BOS Volume 15.07.
    • F1062 Standard Test Method for Verification of Ski Binding Test Devices has been reapproved, available as F1062-97(2013) developed by Committee F27.10, ASTM BOS Volume 15.07.
    • F1149 Standard Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services has been reapproved, available as F1149-93(2013) developed by Committee F30.03, ASTM BOS Volume 13.02.
    • F1250 Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers has been revised to F1250-13 developed by Committee F08.30, ASTM BOS Volume 15.07.
    • F1352 Standard Guide for Fixed Blade Broadhead Performance and Safety Standards has been reapproved, available as F1352-08(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
    • F1361 Standard Test Method for Performance of Open Deep Fat Fryers has been reapproved, available as F1361-07(2013) developed by Committee F26.06, ASTM BOS Volume 15.12.
    • F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) has been revised to F1377-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
    • F1435 Standard Specification for Designation of the Balance Point Location for Archery Arrows has been reapproved, available as F1435-08(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
    • F1494 Standard Terminology Relating to Protective Clothing has been revised to F1494-13 developed by Committee F23.91, ASTM BOS Volume 11.03.
    • F1586/F1586M Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) has been editorially changed, available as F1586/F1586M-13e1 developed by Committee F04.12, ASTM BOS Volume 13.01.
    • F1648 Standard Test Methods for Archery Bowstring Component—Serving String Material has been reapproved, available as F1648-95(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
    • F1675 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits has been revised to F1675-13 developed by Committee F17.62, ASTM BOS Volume 08.04.
    • F1690 Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013) has been withdrawn, with no replacement. F1690-96(2004) developed by Committee F29.14, ASTM BOS Volume 13.02.
    • F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings has been revised to F1866-13 developed by Committee F17.63, ASTM BOS Volume 08.04.
    • F1949 Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles has been reapproved, available as F1949-99(2013) developed by Committee F30.01, ASTM BOS Volume 13.02.
    • F1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems has been editorially changed, available as F1970-12e1 developed by Committee F17.10, ASTM BOS Volume 08.04.
    • F1989 Standard Specification for Cooking Fire Suppression Blankets has been reapproved, available as F1989-05(2013) developed by Committee F15.46, ASTM BOS Volume 15.11.
    • F2050 Standard Consumer Safety Specification for Hand-Held Infant Carriers has been revised to F2050-13 developed by Committee F15.21, ASTM BOS Volume 15.11.
    • F2087 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick has been revised to F2087-13 developed by Committee F25.02, ASTM BOS Volume 01.07.
    • F2148 Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA) has been revised to F2148-13 developed by Committee F04.16, ASTM BOS Volume 13.01.
    • F2319 Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013) has been withdrawn, with no replacement. F2319-04 developed by Committee F30.01, ASTM BOS Volume 13.02.
    • F2523 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers has been revised to F2523-13 developed by Committee F03.70, ASTM BOS Volume 09.02.
    • F2601 Standard Specification for Fire Safety for Candle Accessories has been revised to F2601-13 developed by Committee F15.45, ASTM BOS Volume 15.11.
    • F2650 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment has been revised to F2650-13 developed by Committee F08.80, ASTM BOS Volume 15.07.
    • F2687 Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment has been revised to F2687-13 developed by Committee F26.05, ASTM BOS Volume 15.12.
    • F2723 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation has been revised to F2723-13a developed by Committee F04.22, ASTM BOS Volume 13.02.
    • F2817 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair has been revised to F2817-13 developed by Committee F17.60, ASTM BOS Volume 08.04.
    • F2940 Standard Practice for Air Soft Field Operation is a new standard, now available. F2940-13 developed by Committee F08.27, ASTM BOS Volume 15.07.
    • F2941 Standard Practice for Air Soft Player Safety Briefing is a new standard, now available. F2941-13 developed by Committee F08.27, ASTM BOS Volume 15.07.
    • F2949 Standard Specification for Pole Vault Box Collars has been editorially changed, available as F2949-12e1 developed by Committee F08.67, ASTM BOS Volume 15.07.
    • F2966 Standard Guide for Snow and Ice Control for Walkway Surfaces is a new standard, now available. F2966-13 developed by Committee F13.50, ASTM BOS Volume 15.07.
    • F2976 Standard Practice for Determining the Field Performance of Commercial Kitchen Demand Control Ventilation Systems has been revised to F2976-13 developed by Committee F26.07, ASTM BOS Volume 15.12.
    • F2983 Standard Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats is a new standard, now available. F2983-13 developed by Committee F08.12, ASTM BOS Volume 15.07.
    • F2996 Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems is a new standard, now available. F2996-13 developed by Committee F04.22, ASTM BOS Volume 13.02.
    • F3006 Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing is a new standard, now available. F3006-13 developed by Committee F12.10, ASTM BOS Volume 15.08.
    • F3007 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass is a new standard, now available. F3007-13 developed by Committee F12.10, ASTM BOS Volume 15.08.
    • F3011 Standard Specification for Performance of Angle of Attack System is a new standard, now available. F3011-13 developed by Committee F39.03, ASTM BOS Volume 15.11.
    • F3023 Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers is a new standard, now available. F3023-13 developed by Committee F08.30, ASTM BOS Volume 15.07.
    • G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements has been editorially changed, available as G5-13e1 developed by Committee G01.11, ASTM BOS Volume 03.02.
    • G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) has been reapproved, available as G96-90(2013) developed by Committee G01.11, ASTM BOS Volume 03.02.
    • G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests has been revised to G117-13 developed by Committee G02.20, ASTM BOS Volume 03.02.
    • G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials has been revised to G152-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
    • G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials has been revised to G153-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
    • G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials has been revised to G155-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
    • G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation has been reapproved, available as G189-07(2013) developed by Committee G01.11, ASTM BOS Volume 03.02.
    • G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser has been revised (with title change) to G195-13 developed by Committee G02.30, ASTM BOS Volume 03.02.

     

    5.11.
  • F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing has been revised to F876-13a developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F883 Standard Performance Specification for Padlocks has been revised to F883-13 developed by Committee F12.50, ASTM BOS Volume 15.08.
  • F964 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing has been revised to F964-13 developed by Committee F14.30, ASTM BOS Volume 01.06.
  • F1002 Standard Performance Specification for Protective Clothing and the Materials from Which It Is Made for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards has been revised to F1002-13 developed by Committee F23.80, ASTM BOS Volume 11.03.
  • F1061 Standard Specification for Ski Binding Test Devices has been reapproved, available as F1061-08(2013) developed by Committee F27.10, ASTM BOS Volume 15.07.
  • F1062 Standard Test Method for Verification of Ski Binding Test Devices has been reapproved, available as F1062-97(2013) developed by Committee F27.10, ASTM BOS Volume 15.07.
  • F1149 Standard Practice for Qualifications, Responsibilities, and Authority of Individuals and Institutions Providing Medical Direction of Emergency Medical Services has been reapproved, available as F1149-93(2013) developed by Committee F30.03, ASTM BOS Volume 13.02.
  • F1250 Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers has been revised to F1250-13 developed by Committee F08.30, ASTM BOS Volume 15.07.
  • F1352 Standard Guide for Fixed Blade Broadhead Performance and Safety Standards has been reapproved, available as F1352-08(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F1361 Standard Test Method for Performance of Open Deep Fat Fryers has been reapproved, available as F1361-07(2013) developed by Committee F26.06, ASTM BOS Volume 15.12.
  • F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) has been revised to F1377-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F1435 Standard Specification for Designation of the Balance Point Location for Archery Arrows has been reapproved, available as F1435-08(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F1494 Standard Terminology Relating to Protective Clothing has been revised to F1494-13 developed by Committee F23.91, ASTM BOS Volume 11.03.
  • F1586/F1586M Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675) has been editorially changed, available as F1586/F1586M-13e1 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F1648 Standard Test Methods for Archery Bowstring Component—Serving String Material has been reapproved, available as F1648-95(2013) developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F1675 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits has been revised to F1675-13 developed by Committee F17.62, ASTM BOS Volume 08.04.
  • F1690 Standard Specification for Humidifiers for Medical Use—Part 1: General Requirements for Active Humidification Systems (Withdrawn 2013) has been withdrawn, with no replacement. F1690-96(2004) developed by Committee F29.14, ASTM BOS Volume 13.02.
  • F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings has been revised to F1866-13 developed by Committee F17.63, ASTM BOS Volume 08.04.
  • F1949 Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles has been reapproved, available as F1949-99(2013) developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems has been editorially changed, available as F1970-12e1 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F1989 Standard Specification for Cooking Fire Suppression Blankets has been reapproved, available as F1989-05(2013) developed by Committee F15.46, ASTM BOS Volume 15.11.
  • F2050 Standard Consumer Safety Specification for Hand-Held Infant Carriers has been revised to F2050-13 developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2087 Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick has been revised to F2087-13 developed by Committee F25.02, ASTM BOS Volume 01.07.
  • F2148 Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA) has been revised to F2148-13 developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F2319 Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013) has been withdrawn, with no replacement. F2319-04 developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F2523 Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers has been revised to F2523-13 developed by Committee F03.70, ASTM BOS Volume 09.02.
  • F2601 Standard Specification for Fire Safety for Candle Accessories has been revised to F2601-13 developed by Committee F15.45, ASTM BOS Volume 15.11.
  • F2650 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment has been revised to F2650-13 developed by Committee F08.80, ASTM BOS Volume 15.07.
  • F2687 Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment has been revised to F2687-13 developed by Committee F26.05, ASTM BOS Volume 15.12.
  • F2723 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation has been revised to F2723-13a developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F2817 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair has been revised to F2817-13 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F2940 Standard Practice for Air Soft Field Operation is a new standard, now available. F2940-13 developed by Committee F08.27, ASTM BOS Volume 15.07.
  • F2941 Standard Practice for Air Soft Player Safety Briefing is a new standard, now available. F2941-13 developed by Committee F08.27, ASTM BOS Volume 15.07.
  • F2949 Standard Specification for Pole Vault Box Collars has been editorially changed, available as F2949-12e1 developed by Committee F08.67, ASTM BOS Volume 15.07.
  • F2966 Standard Guide for Snow and Ice Control for Walkway Surfaces is a new standard, now available. F2966-13 developed by Committee F13.50, ASTM BOS Volume 15.07.
  • F2976 Standard Practice for Determining the Field Performance of Commercial Kitchen Demand Control Ventilation Systems has been revised to F2976-13 developed by Committee F26.07, ASTM BOS Volume 15.12.
  • F2983 Standard Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats is a new standard, now available. F2983-13 developed by Committee F08.12, ASTM BOS Volume 15.07.
  • F2996 Standard Practice for Finite Element Analysis (FEA) of Non-Modular Metallic Orthopaedic Hip Femoral Stems is a new standard, now available. F2996-13 developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F3006 Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing is a new standard, now available. F3006-13 developed by Committee F12.10, ASTM BOS Volume 15.08.
  • F3007 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass is a new standard, now available. F3007-13 developed by Committee F12.10, ASTM BOS Volume 15.08.
  • F3011 Standard Specification for Performance of Angle of Attack System is a new standard, now available. F3011-13 developed by Committee F39.03, ASTM BOS Volume 15.11.
  • F3023 Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper Body Ergometers is a new standard, now available. F3023-13 developed by Committee F08.30, ASTM BOS Volume 15.07.
  • G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements has been editorially changed, available as G5-13e1 developed by Committee G01.11, ASTM BOS Volume 03.02.
  • G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) has been reapproved, available as G96-90(2013) developed by Committee G01.11, ASTM BOS Volume 03.02.
  • G117 Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests has been revised to G117-13 developed by Committee G02.20, ASTM BOS Volume 03.02.
  • G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials has been revised to G152-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
  • G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials has been revised to G153-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
  • G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials has been revised to G155-13 developed by Committee G03.03, ASTM BOS Volume 14.04.
  • G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation has been reapproved, available as G189-07(2013) developed by Committee G01.11, ASTM BOS Volume 03.02.
  • G195 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser has been revised (with title change) to G195-13 developed by Committee G02.30, ASTM BOS Volume 03.02.
  •  

    Published in international.