British Standards

Issue 54 – October 2013

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATIONS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 7346-7:2013 Components for smoke and heat control systems. Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks
    Supersedes BS 7346-7:2006
  • BS 7499:2013 Static site guarding and mobile patrol service. Code of practice
    Supersedes BS 7499:2007
  • BS 7856:2013 Code of practice for special design and other features of alternating current watt-hour meters for active energy (MID accuracy classes A and B) for use in the UK
    Supersedes BS 7856:1996
  • BS 13500:2013 Code of practice for delivering effective governance of organizations
  • BS 42020:2013 Biodiversity. Code of practice for planning and development

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 131-7:2013 Ladders. Mobile ladders with platform
  • BS EN 280:2013 Mobile elevating work platforms. Design calculations. Stability criteria. Construction safety. Examinations and tests
    Supersedes BS EN 280:2001+A2:2009
  • BS EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply
    Supersedes BS EN 834:1995
  • BS EN 845-1:2013 Specification for ancillary components for masonry. Wall ties, tension straps, hangers and brackets
    Supersedes BS EN 845-1:2003+A1:2008
  • BS EN 845-2:2013 Specification for ancillary components for masonry. Lintels
    Supersedes BS EN 845-2:2003
  • BS EN 845-3:2013 Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork
    Supersedes BS EN 845-3:2003+A1:2008
  • BS EN 901:2013 Chemicals used for treatment of water intended for human consumption. Sodium hypochlorite
    Supersedes BS EN 901:2007
  • BS EN 1591-4:2013 Flanges and their joints. Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
    Supersedes DD CEN/TS 1591-4:2007
  • BS EN ISO 1833-25:2013 Textiles. Quantitative chemical analysis. Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform)
  • BS EN 1838:2013 Lighting applications. Emergency lighting
    Supersedes BS EN 1838:1999
  • BS EN 1846-3:2013 Firefighting and rescue service vehicles. Permanently installed equipment. Safety and performance
    Supersedes BS EN 1846-3:2002+A1:2008
  • BS EN 1983:2013 Industrial valves. Steel ball valves
    Supersedes BS EN 1983:2006
  • BS EN ISO 13274:2013 Packaging. Transport packaging for dangerous goods. Plastics compatibility testing for packaging and IBCs
    Supersedes BS EN ISO 16101:2004 and BS EN ISO 23667:2007
  • BS EN 13732:2013 Food processing machinery. Bulk milk coolers on farms. Requirements for performance, safety and hygiene
    Supersedes BS EN 13732:2002+A2:2009
  • BS EN 13757-4:2013 Communication systems for meters and remote reading of meters. Wireless meter readout (Radio meter reading for operation in SRD bands)
    Supersedes BS EN 13757-4:2005
  • BS EN ISO 13856-3:2013 Safety of machinery. Pressure-sensitive protective devices. General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices
    Supersedes BS EN 1760-3:2004+A1:2009
  • BS EN ISO 14031:2013 Environmental management. Environmental performance evaluation. Guidelines
    Supersedes BS EN ISO 14031:2000
  • BS EN 14143:2013 Respiratory equipment. Self-contained rebreathing diving apparatus
    Supersedes BS EN 14143:2003
  • BS EN 14215:2013 Textile floor coverings. Classification of machine-made pile rugs and runners
    Supersedes BS EN 14215:2003 and BS EN 15825:2010
  • BS EN 14241-1:2013 Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners
    Supersedes BS EN 14241-1:2005
  • BS EN 14511-2:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test conditions
    Supersedes BS EN 14511-2:2011
  • BS EN 14511-3:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Test methods
    Supersedes BS EN 14511-3:2011
  • BS EN 14511-4:2013 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling. Operating requirements, marking and instructions
    Supersedes BS EN 14511-4:2011
  • BS EN ISO 14732:2013 Welding personnel. Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
    Supersedes BS EN 1418:1998
  • BS EN 15075:2013 Chemicals used for treatment of swimming pool water. Sodium hydrogen carbonate
    Supersedes BS EN 15075:2006
  • BS EN 15077:2013 Chemicals used for treatment of swimming pool water. Sodium hypochlorite
    Supersedes BS EN 15077:2006
  • BS EN 15218:2013 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions test methods and requirements
    Supersedes BS EN 15218:2006
  • BS EN 15280:2013 Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines
    Supersedes DD CEN/TS 15280:2006
  • BS EN 15682-1:2013 Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass. Definition and description
  • BS EN 15682-2:2013 Glass in building. Heat soaked thermally toughened alkaline earth silicate safety glass. Evaluation of conformity/product standard
  • BS EN 15683-1:2013 Glass in building. Thermally toughened soda lime silicate channel shaped safety glass. Definition and description
  • BS EN 15721:2013 (BS 2000-571:2013) Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
    Supersedes BS EN 15721:2009
  • BS EN 15975-2:2013 Security of drinking water supply. Guidelines for risk and crisis management. Risk management
  • BS EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
    Supersedes BS EN 12864:2001+A3:2009, BS EN 13785:2005+A1:2008 and BS EN 13786:2004+A1:2008 which remain current
  • BS EN ISO 16187:2013 Footwear and footwear components. Test method to assess antibacterial activity
  • BS EN 16232:2013 Child use and care articles. Infant swings
  • BS EN 16249:2013 Tanks for the transport of dangerous goods. Service equipment. Cap for the adaptor for bottom loading and unloading
  • BS EN 16357:2013 Carbonate liming materials. Determination of reactivity. Automatic titration method with citric acid
  • BS EN 16370:2013 Chemicals used for treatment of water intended for human consumption. Sodium chloride for on site electrochlorination using membrane cells
  • BS EN 16378:2013 Cereals. Determination of impurities content in maize (Zea mays, L.) and sorghum (Sorghum bicolor, L.)
  • BS EN ISO 16495:2013 Packaging. Transport packaging for dangerous goods. Test methods
  • BS EN ISO 16498:2013 Dentistry. Minimal dental implant data set for clinical use
  • BS EN ISO/IEC 17067:2013 Conformity assessment. Fundamentals of product certification and guidelines for product certification schemes
    Supersedes PD ISO/IEC Guide 67:2004
  • BS EN ISO 19156:2013 Geographic information. Observations and measurements
  • BS EN ISO 21563:2013 Dentistry. Hydrocolloid impression materials
    Supersedes BS 4269-2:1991, BS EN ISO 13716:2000 and BS EN ISO 1564:1999
  • BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (coherence scanning interferometry) instruments
  • BS EN 50132-7:2012 Alarm systems. CCTV surveillance systems for use in security applications. Application guidelines
    Supersedes BS EN 50132-7:1996
  • BS EN 55013:2013 Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement
    Supersedes BS EN 55013:2001+A2:2006 which remains current
  • BS EN 60068-2-57:2013 Environmental testing. Tests. Test Ff: Vibration. Time-history and sine-beat method
    Supersedes BS EN 60068-2-57:2000 and BS EN 60068-2-59:1993 which remain current
  • BS EN 60099-5:2013 Surge arresters. Selection and application recommendations
    Supersedes BS EN 60099-5:1997
  • BS EN 60127-7:2013 Miniature fuses. Miniature fuse-links for special applications
  • BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties. Ageing procedures and evaluation of test results
    Supersedes BS EN 60216-1:2002
  • BS EN 60216-8:2013 Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics using simplified procedures
    Supersedes BS EN 60216-1:2002
  • BS EN 60286-3:2013 Packaging of components for automatic handling. Packaging of surface mount components on continuous tapes
    Supersedes BS EN 60286-3:2007, BS EN 60286-3-1:2009 and BS EN 60286-3-2:2009
  • BS EN 60404-11:2013 Magnetic materials. Method of test for the determination of surface insulation resistance of magnetic sheet and strip
    Supersedes BS EN 10282:2001
  • BS EN 60598-2-11:2013 Luminaires. Particular requirements. Aquarium luminaires
    Supersedes BS EN 60598-2-11:2005 which remains current
  • BS EN 60598-2-24:2013 Luminaires. Particular requirements. Luminaires with limited surface temperatures
    Supersedes BS EN 60598-2-24:1999 which remains current
  • BS EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
  • BS EN 60721-2-2:2013 Classification of environmental conditions. Environmental conditions appearing in nature. Precipitation and wind
    Supersedes BS 7527-2.2:1991 which remains current
  • BS EN 60745-2-23:2013 Hand-held motor-operated electric tools. Safety. Particular requirements for die grinders and small rotary tools
  • BS EN 60974-5:2013 Arc welding equipment. Wire feeders
    Supersedes BS EN 60974-5:2008
  • BS EN 61000-3-3:2013 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
    Supersedes BS EN 61000-3-3:2008 which remains current
  • BS EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs). General rules
    Supersedes BS EN 61008-1:2004+A13:2012 which remains current
  • BS EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). General rules
    Supersedes BS EN 61009-1:2004+A14:2012 which remains current
  • BS EN 61300-2-7:2013 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Bending moment
    Supersedes BS EN 61300-2-7:1997
  • BS EN 61970-456:2013 Energy management system application program interface (EMS-API). Solved power system state profiles
  • BS EN 62246-1-1:2013 Reed switches. Generic specification. Quality assessment
    Supersedes DD IEC/PAS 62246-2-1:2008
  • BS EN 62325-450:2013 Framework for energy market communications. Profile and context modelling rules
  • BS EN 62552:2013 Household refrigerating appliances. Characteristics and test methods
    Supersedes BS EN 153:2006 and BS EN ISO 15502:2005
  • BS EN 62598:2013 Nuclear instrumentation. Constructional requirements and classification of radiometric gauges
    Supersedes BS EN 60405:2007

BS ENs IMPLEMENTED BY AMENDMENT

  • BS EN ISO 23611-6:2013 Soil quality. Sampling of soil invertebrates. Guidance for the design of sampling programmes with soil invertebrates
    Implementation of European Standard EN ISO 23611-6 by amendment to BS ISO 23611-6:2012

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole. Dimensions
    Supersedes BS 4193-2:1986
  • BS ISO 1629:2013 Rubber and latices. Nomenclature
    Supersedes BS ISO 1629:1995+A1:2007
  • BS ISO 2926:2013 Aluminium oxide used for the production of primary aluminium. Particle size analysis for the range 45 ?m to 150 ?m. Method using electroformed sieves
    Supersedes BS ISO 2926:2005
  • BS ISO 3310-2:2013 Test sieves. Technical requirements and testing. Test sieves of perforated metal plate
    Supersedes BS 410-2:2000
  • BS ISO 3338-2:2013 Cylindrical shanks for milling cutters. Dimensional characteristics of flatted cylindrical shanks
    Supersedes BS ISO 3338-2:2007
  • BS ISO 3951-1:2013 Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
    Supersedes BS 6002-1:2007
  • BS ISO 3951-2:2013 Sampling procedures for inspection by variables. General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
    Supersedes BS 6002-2:2007
  • BS ISO 4261:2013 Petroleum products. Fuels (class F). Specifications of gas turbine fuels for industrial and marine applications
  • BS ISO 4716:2013 Essential oil of vetiver [Chrysopogon zizanioides (L.) Roberty, syn. Vetiveria zizanioides (L.) Nash]
  • BS ISO 5431:2013 Leather. Wet blue goat skins. Specification
    Supersedes BS ISO 5431:1999
  • BS ISO 5432:2013 Leather. Wet blue sheep skins. Specification
  • BS ISO 6626-2:2013 Internal combustion engines. Piston rings. Coilspring- loaded oil control rings of narrow width made of cast iron
  • BS ISO 7583:2013 Anodizing of aluminium and its alloys. Terms and definitions
  • BS ISO 7755-1:2013 Hardmetal burrs. General specifications
  • BS ISO 7755-2:2013 Hardmetal burrs. Cylindrical burrs (style A)
  • BS ISO 7755-3:2013 Hardmetal burrs. Cylindrical round- (ball-) nose burrs (style C)
  • BS ISO 7755-4:2013 Hardmetal burrs. Spherical burrs (style D)
  • BS ISO 7755-5:2013 Hardmetal burrs. Oval burrs (style E)
  • BS ISO 7755-6:2013 Hardmetal burrs. Arch round- (ball-) nose burrs (style F)
  • BS ISO 7755-7:2013 Hardmetal burrs. Arch pointed-nose burrs (style G)
  • BS ISO 7755-8:2013 Hardmetal burrs. Flame burrs (style H)
  • BS ISO 7755-9:2013 Hardmetal burrs. 60 degrees and 90 degrees cone burrs (styles J and K)
  • BS ISO 7755-10:2013 Hardmetal burrs. Conical round- (ball-) nose burrs (style L)
  • BS ISO 7755-11:2013 Hardmetal burrs. Conical pointed-nose burrs (style M)
  • BS ISO 7755-12:2013 Hardmetal burrs. Inverted cone burrs (style N)
  • BS ISO 8404:2013 Tools for moulding. Angle pins
    Supersedes BS ISO 8404:2003
  • BS ISO 9162:2013 Petroleum products. Fuels (class F). Liquefied petroleum gases. Specifications
  • BS ISO 9622:2013 Milk and liquid milk products. Guidelines for the application of mid-infrared spectrometry
    Supersedes BS ISO 9622:1999
  • BS ISO 10775:2013 Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method
    Supersedes BS ISO 10775:1995
  • BS ISO 11011:2013 Compressed air. Energy efficiency. Assessment
  • BS ISO 12140:2013 Agricultural machinery. Agricultural trailers and trailed equipment. Drawbar jacks
    Supersedes BS ISO 12140:1998
  • BS ISO 13033:2013 Bases for design of structures. Loads, forces and other actions. Seismic actions on non-structural components for building applications
  • BS ISO 13044-2:2013 Road vehicles. Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations. 50 mm fifth wheel couplings. Electrical and pneumatic interface
  • BS ISO 13931:2013 Carbon fibre. Determination of volume resistivity
  • BS ISO 14186:2013 Air cargo. Fire containment covers. Design, performance and testing requirements
  • BS ISO 15623:2013 Intelligent transport systems. Forward vehicle collision warning systems. Performance requirements and test procedures
  • BS ISO 16334:2013 Monolithic refractory products. Determination of resistance to explosives palling
  • BS ISO 16737:2012 Fire safety engineering. Requirements governing algebraic equations. Vent flows
  • BS ISO 16739:2013 Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries
  • BS ISO 17095:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials at elevated temperatures
  • BS ISO 17278:2013 Rubber, raw natural. Determination of the gel content of technically specified rubber (TSR)
  • BS ISO 18421:2013 Ships and marine technology. Inland navigation vessels. Lifebuoy housings
  • BS ISO 18878:2013 Mobile elevating work platforms. Operator (driver) training
    Supersedes BS ISO 18878:2004
  • BS ISO 18899:2013 Rubber. Guide to the calibration of test equipment
    Supersedes BS ISO 18899:2004
  • BS ISO 19072-2:2013 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Test methods and general performance requirements
    Supersedes BS ISO 19072-2:2007
  • BS ISO/IEC 20009-1:2013 Information technology. Security techniques. Anonymous entity authentication. General
  • BS ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
    Supersedes BS ISO 20032:2007
  • BS ISO 20774:2013 Cigarettes. Determination of carbon monoxide in sidestream smoke. Method using a routine analytical linear smoking machine equipped with a fishtail chimney
    Supersedes BS ISO 20774:2007
  • BS ISO 20958:2013 Condition monitoring and diagnostics of machine systems. Electrical signature analysis of three-phase induction motors
  • BS ISO 20998-2:2013 Measurement and characterization of particles by acoustic methods. Guidelines for linear theory
  • BS ISO 21940-31:2013 Mechanical vibration. Rotor balancing. Susceptibility and sensitivity of machines to unbalance
    Supersedes BS ISO 10814:1996
  • BS ISO 23499:2013 Coal. Determination of bulk density for the use in charging of coke ovens
    Supersedes BS ISO 23499:2008
  • BS ISO/IEC 24730-61:2013 Information technology. Real time locating systems (RTLS). Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
  • BS ISO/IEC 24730-62:2013 Information technology. Real time locating systems (RTLS). High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
  • BS ISO/IEC 25064:2013 Systems and software engineering. Software product Quality Requirements and Evaluation (SQuaRE). Common Industry Format (CIF) for usability: User needs report
  • BS ISO/IEC 26550:2013 Software and systems engineering. Reference model for product line engineering and management
  • BS ISO/IEC 27033-5:2013 Information technology. Security techniques. Network security. Securing communications across networks using Virtual Private Networks (VPNs)
    Supersedes BS ISO/IEC 18028-5:2006
  • BS ISO 27186:2010 Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements
  • BS ISO 28881:2013 Machine tools. Safety. Electro-discharge machines
    Supersedes BS EN 12957:2001+A1:2009
  • BS ISO/IEC 29182-5:2013 Information technology. Sensor networks: Sensor Network Reference Architecture (SNRA). Interface definitions
  • BS ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
  • BS ISO/IEC/IEEE 31320-1:2012 Information technology. Modeling Languages. Syntax and Semantics for IDEF0
  • BS IEC 61435:2013 Nuclear instrumentation. High-purity germanium crystals for radiation detectors. Measurement methods of basic characteristics

PUBLISHED DOCUMENTS

  • PD ISO/TS 13447:2013 Fire safety engineering. Guidance for use of fire zone models
  • PD CEN ISO/TS 16189:2013 Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine dimethylformamide in footwear materials
  • PD CEN/TR 16456:2013 Characterization of sludges. Good practice of sludge dewatering
  • PD ISO/TR 16730-2:2013 Fire safety engineering. Assessment, verification and validation of calculation methods. Example of a fire zone model
  • PD ISO/IEC TS 17023:2013 Conformity assessment. Guidelines for determining the duration of management system certification audits
  • PD ISO/TS 20282-2:2013 Usability of consumer products and products for public use. Summative test method
    Supersedes DD ISO/PAS 20282-3:2007 and DD ISO/PAS 20282-4:2007
  • PD ISO/TR 26368:2012 Environmental damage limitation from firefighting water run-off
  • PD ISO/IEC TR 29154:2013 Software engineering. Guide for the application of ISO/IEC 24773:2008 (Certification of software engineering professionals. Comparison framework)
  • PD IEC/TR 62343-6-2:2013 Dynamic modules. Design guide. Software and hardware interfaces. Survey results
    Supersedes PD IEC/TR 62343-6-2:2009
  • PD IEC/TS 62492-2:2013 Industrial process control devices. Radiation thermometers. Determination of the technical data for radiation thermometers
  • PD IEC/TR 62658:2013 Roadmap of optical circuit boards and their related packaging technologies
  • PD IEC/TR 62797:2013 International comparison of measurements of the magnetic moment using vibrating sample magnetometers (VSM) and superconducting quantum interference device (SQUID) magnetometers
  • PD ISO GUIDE 73:2009 Risk management. Vocabulary
    Supersedes PD ISO/IEC Guide 73:2002

PUBLICLY AVAILABLE SPECIFICATIONS

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 68:2013 Impact test specifications for vehicle security barrier systems
    Supersedes PAS 68:2010
  • PAS 69:2013 Guidance for the selection, installation and use of vehicle security barrier systems
    Supersedes PAS 69:2006
  • PAS 91:2013 Construction prequalification questionnaires
  • PAS 2013-1:2013 Liquid fire-extinguishing media. Hand-applied units for use on Class F fires (up to 3 L or up to 5 L cooking media). Specification

CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 5502-22:2003+A1:2013 Buildings and structures for agriculture. Code of practice for design, construction and loading
    AMENDMENT 1
  • BS EN ISO 286-1:2010 Geometrical product specifications (GPS). SO code system for tolerances on linear sizes. Basis of tolerances, deviations and fits
    CORRIGENDUM 1
  • BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
    CORRIGENDUM 1
  • BS EN 589:2008+A1:2012 Automotive fuels. LPG. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 1047-2:2009+A1:2013 Secure storage units. Classification and methods of test for resistance to fire. Data rooms and data container
    AMENDMENT 1
  • BS EN 1317-5:2007+A2:2012 Road restraint systems. Product requirements and evaluation of conformity for vehicle restraint systems
    AMENDMENT 2
  • BS EN 1555-3:2010+A1:2012 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings
    AMENDMENT 1
  • BS EN 1728:2012 Furniture. Seating. Test methods for the determination of strength and durability
    CORRIGENDUM 1
  • BS EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles. Common requirements. Safety and performance
    AMENDMENT 1
  • BS EN 1998-3:2005 Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings
    CORRIGENDUM 2
  • BS EN ISO 2922:2000+A1:2013 Acoustics. Measurement of airborne sound emitted by vessels on inland waterways and harbours
    AMENDMENT 1
  • BS EN ISO 3691-1:2012 Industrial trucks. Safety requirements and verification. Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
    CORRIGENDUM 1
  • BS EN ISO 7218:2007+A1:2013 Microbiology of food and animal feeding stuffs. General requirements and guidance for microbiological examinations
    AMENDMENT 1
  • BS EN ISO 8536-4:2013+A1:2013 Infusion equipment for medical use. Infusion sets for single use, gravity feed
    AMENDMENT 1
  • BS EN 9104-001:2013 Aerospace series. Quality management systems. Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
    CORRIGENDUM 1
  • BS EN ISO 9513:2012 Metallic materials. Calibration of extensometer systems used in uniaxial testing
    CORRIGENDUM 1
  • BS EN ISO 11120:1999+A1:2013 Gas cylinders. Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l. Design construction and testing
    AMENDMENT 1
  • BS EN ISO 11137-1:2006+A1:2013 Sterilization of health care products. Radiation. Requirements for development, validation and routine control of a sterilization process for medical devices
    AMENDMENT 1
  • BS EN 12195-1:2010 Load restraining on road vehicles. Safety. Calculation of securing forces
    CORRIGENDUM 1
  • BS EN 12221-1:2008+A1:2013 Child use and care articles. Changing units for domestic use. Safety requirements
    AMENDMENT 1
  • BS EN 13379:2001+A1:2013 Pasta processing plants. Spreader, stripping and cutting machine, stick return conveyor, stick magazine. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13451-3:2011+A1:2013 Swimming pool equipment. Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features
    AMENDMENT 1
  • BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    CORRIGENDUM 1
  • BS EN ISO 15245-1:2001+A1:2013 Gas cylinders. Parallel threads for connection of valves to gas cylinders. Specification
    AMENDMENT 1
  • BS EN ISO 19001:2013 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
    CORRIGENDUM 1
  • BS EN ISO 23611-6:2013 Soil quality. Sampling of soil invertebrates. Guidance for the design of sampling programmes with soil invertebrates
    CORRIGENDUM 1
  • BS EN ISO 27509:2012 Petroleum and natural gas industries. Compact flanged connections with IX seal ring
    CORRIGENDUM 1
  • BS EN 50117-1:2002+A2:2013 Coaxial cables. General specification
    AMENDMENT 2
  • BS EN 50182:2001 Conductors for overhead lines. Round wire concentric lay stranded conductors
    CORRIGENDUM 3
  • BS EN 50386:2010+A1:2013 Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers
    AMENDMENT 1
  • BS EN 50547:2013 Railway applications. Batteries for auxiliary power supply systems
    CORRIGENDUM 1
  • BS EN 60335-2-11:2010+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for tumble dryers
    AMENDMENT 11
  • BS EN 60335-2-76:2005+A12:2010 Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers
    CORRIGENDUM 3
  • BS EN 61231:2010+A1:2013 International lamp coding system (ILCOS)
    AMENDMENT 1
  • BS EN 61730-1:2007+A2:2013 Photovoltaic (PV) module safety qualification. Requirements for construction
    AMENDMENT 2
  • BS EN 62127-1:2007+A1:2013 Ultrasonics. Hydrophones. Measurement and characterization of medical ultrasonic fields up to 40 MHz
    AMENDMENT 1
  • BS EN 62127-3:2007+A1:2013 Ultrasonics. Hydrophones. Properties of hydrophones for ultrasonic fields up to 40 MHz
    AMENDMENT 1
  • BS EN 62271-109:2009+A1:2013 High-voltage switchgear and controlgear. Alternating-current series capacitor by-pass switches
    AMENDMENT 1
  • BS EN ISO 80601-2-12:2011 Medical electrical equipment. Particular requirements for basic safety and essential performance of critical care ventilators
    CORRIGENDUM 1
  • BS ISO 1206:2001+A1:2013 Rolling bearings. Needle roller bearings, dimension series 48, 49 and 69. Boundary dimensions and tolerances
    AMENDMENT 1
  • BS ISO 3384-1:2011+A1:2013 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression Testing at constant temperature
    AMENDMENT 1
  • BS ISO/IEC 12905:2011 Integrated circuit cards. Enhanced terminal accessibility using cardholder preference interface
    CORRIGENDUM 1
  • BS ISO/IEC 19794-2:2011 Information technology. Biometric data interchange formats. Finger minutiae data
    CORRIGENDUM 2
  • BS ISO/IEC 19794-5:2011 Information technology. Biometric data interchange formats. Face image data
    CORRIGENDUM 1
  • PD IEC/TR 62543:2011+A1:2013 High-voltage direct current (HVDC) power transmission using voltage sourced converters (VSC)
    AMENDMENT 1

BRITISH STANDARDS WITHDRAWN

  • BS 410-2:2000 (ISO 3310-2:1999) Test sieves. Technical requirements and testing. Test sieves of perforated metal plate
    Superseded by BS ISO 3310-2:2013
  • BS 3202-1:1991 Laboratory furniture and fittings. Introduction
    This standard is withdrawn as it is technically out of date
  • BS 3810-2:1965 Glossary of terms used in materials handling. Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling)
    This standard is withdrawn as it is no longer in use
  • BS 4193-2:1986 (ISO 883:1985) Hardmetal insert tooling. Specification for dimensions for indexable hardmetal (carbide) inserts with rounded corners, without fixing hole
    Superseded by BS ISO 883:2013
  • BS 4269-2:1991 (EN 21563:1991, ISO 1563:1990) Dental elastic impression material. Specification for alginate impression material
    Superseded by BS EN ISO 21563:2013
  • BS 4443-3:1988 Methods of test for flexible cellular materials. Method 8. Determination of creep. Method 9. Determination of dynamic cushioning performance
    This standard is withdrawn as it is no longer in use. It is partially superseded by BS EN ISO 4651:1995+A1:2008
  • BS 5061:1974 Specification for cylindrical forage tower silos and recommendations for their use
    This standard is withdrawn as it is no longer in use
  • BS 5438:1989 Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens
    This standard is withdrawn as it is no longer in use. It is partially superseded by BS EN 532:1995
  • BS 5651:1989 Method for cleansing and wetting procedures for use in the assessment of the effect of cleansing and wetting on the flammability of textile fabrics and fabric assemblies
    This standard is withdrawn as it is no longer in use
  • BS 5667-2:1979 (ISO 5028:1977) Specification for continuous mechanical handling equipment. Safety requirements. Loose bulk materials: pneumatic handling installations
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-4:1979 (ISO 5030:1977) Specification for continuous mechanical handling equipment. Safety requirements. Loose bulk materials: mobile suction pipes suspended from derrick jibs used in pneumatic handling
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-9:1979 (ISO 5035:1977) Specification for continuous mechanical handling equipment. Safety requirements. Loose bulk materials: bulk throwing machines
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-10:1979 (ISO 5036:1977) Specification for continuous mechanical handling equipment. Safety requirements. Loose bulk materials: vertical screw conveyors
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-11:1979 (ISO 5037:1977) Specification for continuous mechanical handling equipment. Safety requirements. Unit loads: fixed slat conveyors (metal or wood) with horizontal shafts
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-12:1979 (ISO 5038:1977) Specification for continuous mechanical handling equipment. Safety requirements. Unit loads: mobile slat conveyors (metal or wood) with horizontal shafts
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-13:1979 (ISO 5039:1977) Specification for continuous mechanical handling equipment. Safety requirements. Unit loads: arm elevators and push bar conveyors
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-14:1979 (ISO 5040:1977) Specification for continuous mechanical handling equipment. Safety requirements. Unit loads: live roller conveyors (with positive or friction drive)
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 5667-17:1979 (ISO 5043:1977) Specification for continuous mechanical handling equipment. Safety requirements. Unit loads: continuous plate conveyors (horizontal)
    This dual numbered standard is withdrawn without replacement as the corresponding ISO was withdrawn
  • BS 6002-2:2007 Sampling procedures for inspection by variables. General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
    Superseded by BS ISO 3951-2:2013
  • BS 6321:1982 Specification for authorized signature lists and their representation on microfiche in bank operations
    This standard is withdrawn as it is no longer in use
  • BS 7655-1.4:2000 Specification for insulating and sheathing materials for cables. Elastomeric insulating compounds. Oil resisting types
    This standard is withdrawn as the insulating material this standard describes (type OR1) is now out of date
  • BS EN 153:2006 Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics
    Superseded by BS EN 62552:2013
  • BS EN 1418:1998 Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
    Superseded by BS EN ISO 14732:2013
  • BS EN ISO 1564:1999 Dental aqueous impression materials based on agar
    Superseded by BS EN ISO 21563:2013
  • DD CEN/TS 1591-4:2007 Flanges and their joints. Design rules for gasketed circular flange connections. Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
    Superseded by BS EN 1591-4:2013
  • BS EN 1760-3:2004+A1:2009 Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
    Superseded by BS EN ISO 13856-3:2013
  • BS EN 9104:2006 Aerospace series. Quality management systems. Requirements for aerospace quality management system certification/registrations programs
    Superseded by BS EN 9104-001:2013
  • BS EN 10282:2001 Magnetic materials. Method of test for the determination of surface insulation resistance of electrical sheet and strip
    Superseded by BS EN 60404-11:2013
  • BS EN 12098-2:2001 Controls for heating systems. Optimum start-stop control equipment for hot water heating systems
    Superseded by BS EN 12098-1:2013
  • BS EN 12376:1999 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
    Superseded by BS EN ISO 19001:2013
  • BS EN 12957:2001+A1:2009 Machine tools. Safety. Electro discharge machines
    Superseded by BS ISO 28881:2013
  • BS EN ISO 13716:2000 Dentistry. Reversible-irreversible hydrocolloid impression material systems
    Superseded by BS EN ISO 21563:2013
  • DD CEN/TS 15280:2006 Evaluation of a.c. corrosion likelihood of buried pipelines. Application to cathodically protected pipelines
    Superseded by BS EN 15280:2013
  • eBS EN ISO 15502:2005 Household refrigerating appliances. Characteristics and test methods
    Superseded by BS EN 62552:2013
  • BS EN 15825:2010 Textile floor coverings. Classification of machine-made rugs and runners without pile
    Superseded by BS EN 14215:2013
  • BS EN ISO 16101:2004 Packaging. Transport packaging for dangerous goods. Plastics compatibility testing
    Superseded by BS EN ISO 13274:2013
  • BS EN ISO 23667:2007 Packaging. Transport packaging for dangerous goods. Rigid plastics and plastics composite IBCs. Compatibility testing
    Superseded by BS EN ISO 13274:2013
  • BS EN 50144-2-16:2003 Safety of hand-held electric motor operated tools. Particular requirements for tackers
    Superseded by BS EN 60745-2-16:2010
  • BS EN 50304:2009 (BS EN 60350:2009) Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
    Superseded by BS EN 50304:2009+A1:2010
  • BS EN 55016-1-1:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus
    Superseded by BS EN 55016-1-1:2010+A1:2010
  • BS EN 55016-2-3:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
    Superseded by BS EN 55016-2-3:2010+A1:2010
  • BS EN 60034-1:2004 Rotating electrical machines. Rating and performance
    Superseded by BS EN 60034-1:2010
  • BS EN 60065:2002+A1:2006 Audio, video and similar electronic apparatus. Safety requirements
    Superseded by BS EN 60065:2002+A2:2010
  • BS EN 60065:2002+A2:2010 Audio, video and similar electronic apparatus. Safety requirements
    Superseded by BS EN 60065:2002+A12:2011
  • BS EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing procedures and evaluation of test results
    Superseded by BS EN 60216-1:2013 and BS EN 60216-8:2013
  • BS EN 60286-3-1:2009 Packaging of components for automatic handling. Packaging of surface mount components on continuous tapes. Type V. Pressed carrier tapes
    Superseded by BS EN 60286-3:2013
  • BS EN 60286-3-2:2009 Packaging of components for automatic handling. Packaging of surface mount components on continuous tapes. Type VI. Blister carrier tapes of 4 mm width
    Superseded by BS EN 60286-3:2013
  • BS EN 60335-2-9:2003+A2:2006 Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances
    Superseded by BS EN 60335-2-9:2003+A13:2010
  • BS EN 60335-2-21:2003 Household and similar electrical appliances. Safety. Particular requirements for storage water heaters
    Superseded by BS EN 60335-2-21:2003+A2:2008
  • BS EN 60335-2-25:2002 Specification for safety of household and similar electrical appliances. Particular requirements for microwave ovens, including combination micro wave ovens
    Superseded by BS EN 60335-2-25:2002+A11:2010
  • BS EN 60335-2-54:2003 Household and similar electrical appliances. Safety. Particular requirements for surface cleaning appliances for household use employing liquids or steam
    Superseded by BS EN 60335-2-54:2008
  • BS EN 60405:2007 Nuclear instrumentation. Constructional requirements and classification of radiometric gauges
    Superseded by BS EN 62598:2013
  • BS EN 60546-1:1993 Controllers with analogue signals for use in industrial-process control systems. Methods for evaluating performance
    Superseded by BS EN 60546-1:2010
  • BS EN 60601-2-33:2002+A2:2008 Medical electrical equipment. Particular requirements for the safety of magnetic resonance equipment for medical diagnosis
    Superseded by BS EN 60601-2-33:2010
  • BS EN 60730-2-7:1992 Specification for automatic electrical controls for household and similar use. Particular requirements. Timers and time switches
    Superseded by BS EN 60730-2-7:2010
  • BS EN 60745-1:2009 Hand-held motor-operated electric tools. Safety. General requirements
    Superseded by BS EN 60745-1:2009+A11:2010
  • BS EN 60745-2-5:2007+A11:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws
    Superseded by BS EN 60745-2-5:2010
  • BS EN 60825-2:2004+A1:2007 Safety of laser products. Safety of optical fibre communication systems (OFCS)
    Superseded by BS EN 60825-2:2004+A2:2010
  • BS EN 61000-4-20:2003 Electromagnetic Compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
    Superseded by BS EN 61000-4-20:2010
  • BS EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements
    Superseded by BS EN 61010-1:2010
  • BS EN 61558-2-23:2001 Safety of power transformers, power supply units and similar. Particular requirements for transformers for construction sites
    Superseded by BS EN 61558-2-23:2010
  • BS ISO 10814:1996 Mechanical vibration. Susceptibility and sensitivity of machines to unbalance
    Superseded by BS ISO 21940-31:2013
  • BS ISO/IEC 18028-5:2006 Information technology. Security techniques. IT network security. Securing communications across networks using virtual private networks
    Superseded by BS ISO/IEC 27033-5:2013
  • DD ISO/PAS 20282-3:2007 Ease of operation of everyday products. Test method for consumer products
    Superseded by PD ISO/TS 20282-2:2013
  • DD ISO/PAS 20282-4:2007 Ease of operation of everyday products. Test method for the installation of consumer products
    Superseded by PD ISO/TS 20282-2:2013
  • DD IEC/PAS 62246-2-1:2008 Reed contact units. Heavy-duty reed switches. Quality assessment specification
    Superseded by BS EN 62246-1-1:2013
  • PD ISO/IEC Guide 67:2004 Conformity asessment. Fundamentals of product certification
    Superseded by BS EN ISO/IEC 17067:2013
  • PD 7010:1997 Essential requirements for a handset telephony facility provided by terminal equipment intended for direct connection to an analogue interface of the public switched telephone network
    This standard is withdrawn as it is no longer in use
  • BS MA 2-1:1985 Magnetic compasses and binnacles. Specification for class A magnetic compasses, their binnacles and azimuth reading devices (including test procedures)
    This standard is withdrawn as it is no longer in use
  • BS MA 2-4:1985 Magnetic compasses and binnacles. Glossary of terms
    This standard is withdrawn as it is no longer in use
  • BS MA 2-8:1985 Magnetic compasses and binnacles. Specification for transmitting systems and off-course alarms for class A magnetic compasses
    This standard is withdrawn as it is no longer in use

 

Published in international.