British Standards

How to write Standards

Issue 49 – May 2013

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATIONS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 5410-2:2013 Code of practice for oil firing. Installations over 45 kW output capacity for space heating, hot water and steam supply services
    Supersedes BS 5410-2:1978
  • BS 5839-1:2013 Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
    Supersedes BS 5839-1:2002+A2:2008
  • BS 5839-8:2013 Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of voice alarm systems
    Supersedes BS 5839-8:2008
  • BS 8568:2013 Cleanroom energy. Code of practice for improving energy efficiency in cleanrooms and clean air devices

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN ISO 105-E02:2013 Textiles. Tests for colour fastness. Colour fastness to sea water
    Supersedes BS EN ISO 105-E02:1996
  • BS EN 228:2012 Automotive fuels. Unleaded petrol. Requirements and test methods
    Supersedes BS EN 228:2008
  • BS EN 302-1:2013 Adhesives for load-bearing timber structures. Test methods. Determination of longitudinal tensile shear strength
    Supersedes BS EN 302-1:2004
  • BS EN 302-2:2013 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
    Supersedes BS EN 302-2:2004
  • BS EN 302-3:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
    Supersedes BS EN 302-3:2004
  • BS EN 302-4:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
    Supersedes BS EN 302-4:2004
  • BS EN 302-6:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the minimum pressing time under referenced conditions
    Supersedes BS EN 302-6:2004
  • BS EN 302-7:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions
    Supersedes BS EN 302-7:2004
  • BS EN 480-15:2013 Admixtures for concrete, mortar and grout. Test methods. Reference concrete and method for testing viscosity modifying admixtures
  • BS EN ISO 717-1:2013 Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation
    Supersedes BS EN ISO 717-1:1997
  • BS EN ISO 717-2:2013 Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation
    Supersedes BS EN ISO 717-2:1997
  • BS EN 823:2013 Thermal insulating products for building applications. Determination of thickness
    Supersedes BS EN 823:1995
  • BS EN 824:2013 Thermal insulating products for building applications. Determination of squareness
    Supersedes BS EN 824:1995
  • BS EN 825:2013 Thermal insulating products for building applications. Determination of flatness
    Supersedes BS EN 825:1995
  • BS EN 826:2013 Thermal insulating products for building applications. Determination of compression behaviour
    Supersedes BS EN 826:1996
  • BS EN 1080:2013 Impact protection helmets for young children
    Supersedes BS EN 1080:1997
  • BS EN 1242:2013 Adhesives. Determination of isocyanate content
    Supersedes BS EN 1242:2005
  • BS EN 1316-1:2012 Hardwood round timber. Qualitative classification. Oak and beech
    Supersedes BS EN 1316-1:1997
  • BS EN 1602:2013 Thermal insulating products for building applications. Determination of the apparent density
    Supersedes BS EN 1602:1997
  • BS EN 1603:2013 Thermal insulating products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23ºC/50% relative humidity)
    Supersedes BS EN 1603:1997
  • BS EN 1604:2013 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
    Supersedes BS EN 1604:1996
  • BS EN 1605:2013 Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
    Supersedes BS EN 1605:1997
  • BS EN 1606:2013 Thermal insulating products for building applications. Determination of compressive creep
    Supersedes BS EN 1606:1997
  • BS EN 1796:2013 Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
    Supersedes BS EN 1796:2006+A1:2008
  • BS EN ISO 1833-22:2013 Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)
  • BS EN ISO 1833-26:2013 Textiles. Quantitative chemical analysis. Mixtures of melamine and cotton or aramide fibres (method using hot formic acid)
  • BS EN 1910:2013 Wood flooring and wood panelling and cladding. Determination of dimensional stability
    Supersedes BS EN 1910:2000
  • BS EN 2840:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
  • BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
  • BS EN ISO 3233-1:2013 Paints and varnishes. Determination of the percentage volume of non-volatile matter. Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
    Supersedes BS 3900-A10:1998
  • BS EN 3698:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
  • BS EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
    Supersedes BS EN 24492:1993
  • BS EN 4628:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ? 200 mm. 1150 MPa ? Rm ? 1300 MPa
    Supersedes BS EN 4628:2007
  • BS EN 4629:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ? 300 mm
    Supersedes BS EN 4629:2007
  • BS EN 4631:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ? 200 mm. 900 MPa ? Rm ? 1050 MPa
    Supersedes BS EN 4631:2007
  • BS EN ISO 5526:2013 Cereals, pulses and other food grains. Nomenclature
    Supersedes BS 6860:1987
  • BS EN ISO 8536-4:2013 Infusion equipment for medical use. Infusion sets for single use, gravity feed
    Supersedes BS EN ISO 8536-4:2010
  • BS EN 9104-001:2013 Aerospace series. Quality management systems. Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
  • BS EN ISO 10323:2013 Dentistry. Bore diameters for rotary instruments such as discs and wheels
    Supersedes BS EN ISO 10323:1996
  • BS EN 12085:2013 Thermal insulating products for building applications. Determination of linear dimensions of test specimens
    Supersedes BS EN 12085:1997
  • BS EN 12086:2013 Thermal insulating products for building applications. Determination of water vapour transmission properties
    Supersedes BS EN 12086:1997
  • BS EN 12089:2013 Thermal insulating products for building applications. Determination of bending behaviour
    Supersedes BS EN 12089:1997
  • BS EN 12090:2013 Thermal insulating products for building applications. Determination of shear behaviour
    Supersedes BS EN 12090:1997
  • BS EN 12091:2013 Thermal insulating products for building applications. Determination of freeze-thaw resistance
    Supersedes BS EN 12091:1997
  • BS EN ISO 12217-1:2013 Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m
    Supersedes BS EN ISO 12217-1:2002+A1:2009
  • BS EN ISO 12217-2:2013 Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
    Supersedes BS EN ISO 12217-2:2002
  • BS EN ISO 12217-3:2013 Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m
    Supersedes BS EN ISO 12217-3:2002+A1:2009
  • BS EN 12430:2013 Thermal insulating products for building applications. Determination of behaviour under point load
    Supersedes BS EN 12430:1998
  • BS EN 12431:2013 Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
    Supersedes BS EN 12431:1998
  • BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
    Supersedes BS EN 12750:2001+A1:2009
  • BS EN 12786:2013 Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards
    Supersedes BS EN 12786:1999
  • BS EN 13135:2013 Cranes. Safety. Design. Requirements for equipment
    Supersedes BS EN 13135-1:2003+A1:2010 and BS EN 13135-2:2004+A1:2010
  • BS EN 13282-1:2013 Hydraulic road binders. Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
    Supersedes DD ENV 13282:2000
  • BS EN 13282-3:2013 Hydraulic road binders. Conformity evaluation
  • BS EN 13442:2013 Wood flooring and wood panelling and cladding. Determination of the resistance to chemical agents
    Supersedes BS EN 13442:2002
  • BS EN 13752:2012 Chemicals used for treatment of water intended for human consumption. Manganese dioxide
    Supersedes BS EN 13752:2009
  • BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
    Supersedes BS EN 13774:2003
  • BS EN 13804:2013 Foodstuffs. Determination of elements and their chemical species. General considerations and specific requirements
    Supersedes BS EN 13804:2002
  • BS EN 13984:2013 Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
    Supersedes BS EN 13984:2004+A1:2006
  • BS EN 14274:2013 (BS 2000-508:2013) Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS)
    Supersedes BS EN 14274:2003
  • BS EN 14275:2013 (BS 2000-509:2013) Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers
    Supersedes BS EN 14275:2003
  • BS EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints
    Supersedes BS EN 14364:2006+A1:2008
  • BS EN ISO 14644-10:2013 Cleanrooms and associated controlled environments. Classification of surface cleanliness by chemical concentration
  • BS EN 14654-2:2013 Management and control of operational activities in drain and sewer systems outside buildings. Rehabilitation
  • BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
    Supersedes BS EN 14678-1:2006+A1:2009
  • BS EN ISO 14720-2:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
  • BS EN ISO 14890:2013 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
    Supersedes BS EN ISO 14890:2003
  • BS EN 15429-2:2012 Sweepers. Performance requirements and test methods
  • BS EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). General
    Supersedes BS EN ISO 15874-1:2003
  • BS EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes
    Supersedes BS EN ISO 15874-2:2003
  • BS EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings
    Supersedes BS EN ISO 15874-3:2003
  • BS EN ISO 15874-5:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system
    Supersedes BS EN ISO 15874-5:2003
  • BS EN ISO 16119-1:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. General
    Supersedes BS EN 12761-1:2001
  • BS EN ISO 16119-2:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Horizontal boom sprayers
    Supersedes BS EN 12761-2:2001
  • BS EN ISO 16119-3:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Sprayers for bush and tree crops
    Supersedes BS EN 12761-3:2001
  • BS EN ISO 16180:2013 Small craft. Navigation lights. Installation, placement and visibility
  • BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
  • BS EN 16230-1:2013 Leisure karts. Safety requirements and test methods for karts
  • BS EN 16289:2013 Glass packaging. Screw finishes for pressure capsules. MCA 7,5 RF finish
  • BS EN 16291-1:2013 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 2 finish
  • BS EN 16291-2:2013 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 2 finish
  • BS EN 16292:2013 Glass packaging. Screw finishes. Depressed threads
  • BS EN 16293:2013 Packaging. Glass packaging. Deep BVS finishes for still wines
  • BS EN 16301:2013 Natural stone test methods. Determination of sensitivity to accidental staining
  • BS EN 16325:2013 Guarantees of Origin related to energy. Guarantees of Origin for Electricity
  • BS EN 16352:2013 Logistics. Specifications for reporting crime incidents
  • BS EN 16445:2013 Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
  • BS EN ISO 16911-1:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Manual reference method
  • BS EN ISO 16911-2:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Automated measuring systems
  • BS EN ISO 19001:2013 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
  • BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
    Supersedes BS EN ISO 20795-1:2008
  • BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
    Supersedes BS EN ISO 20795-2:2010
  • BS EN ISO 21091:2013 Health informatics. Directory services for healthcare providers, subjects of care and other entities
  • BS EN ISO 21180:2013 Light conveyor belts. Determination of the maximum tensile strength
    Supersedes BS EN ISO 21180:2006
  • BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
    Supersedes BS EN ISO 21181:2006
  • BS EN ISO 21182:2013 Light conveyor belts. Determination of the coefficient of friction
    Supersedes BS EN ISO 21182:2006
  • BS EN ISO 22476-4:2012 Geotechnical investigation and testing. Field testing. Menard pressure meter test
    Partially supersedes BS 5930:1999+A2:2010
  • BS EN ISO 22476-5:2012 Geotechnical investigation and testing. Field testing. Flexible dilatometer test
    Partially supersedes BS 5930:1999+A2:2010
  • BS EN ISO 22476-7:2012 Geotechnical investigation and testing. Field testing. Borehole jack test
    Partially supersedes BS 5930:1999+A2:2010
  • BS EN ISO 23640:2013 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
    Supersedes BS EN ISO 23640:2011
  • BS EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
  • BS EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from hand-held and body-mounted wireless communication devices used by the general public (30 MHz – 6 GHz)
  • BS EN 60349-4:2013 Electric traction. Rotating electrical machines for rail and road vehicles. Permanent magnet synchronous electrical machines connected to an electronic converter
  • BS EN 61056-1:2012 General purpose lead-acid batteries (valve regulated types). General requirements, functional characteristics. Methods of test
    Supersedes BS EN 61056-1:2003
  • BS EN 61131-6:2012 Programmable controllers. Functional safety
  • BS EN 61280-2-2:2012 Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement
    Supersedes BS EN 61280-2-2:2008
  • BS EN 61400-4:2013 Wind turbines. Design requirements for wind turbine gearboxes
    Supersedes BS ISO 81400-4:2005
  • BS EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
    Supersedes BS EN 60439-4:2004
  • BS EN 61513:2013 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
    Supersedes BS IEC 61513:2011
  • BS EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
  • BS EN 61674:2013 Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
    Supersedes BS EN 61674:1998 which remains current
  • BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Single mode fibre pigtailed style optical fuse for category C. Controlled environment
  • BS EN 61772:2013 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
    Supersedes BS IEC 61772:2009
  • BS EN 61850-7-410:2013 Communication networks and systems for power utility automation. Basic communication structure. Hydroelectric power plants. Communication for monitoring and control
    Supersedes BS EN 61850-7-410:2007
  • BS EN 61993-2:2013 Maritime navigation and radiocommunication equipment and systems. Automatic Identification Systems (AIS). Class A shipborne equipment of the automatic identification system (AIS). Operational and performance requirements, methods of test and required test results
    Supersedes BS EN 61993-2:2002
  • BS EN 62271-101:2013 High-voltage switchgear and controlgear. Synthetic testing
    Supersedes BS EN 62271-101:2006+A1:2010
  • BS EN 62382:2013 Control systems in the process industry. Electrical and instrumentation loop check
    Supersedes BS EN 62382:2007
  • BS EN 62488-1:2013 Power line communication systems for power utility applications. Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
    Supersedes BS EN 60495:1994

BS ENs IMPLEMENTED BY AMENDMENT

  • BS EN ISO 10930:2013 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
    Implementation of European Standard EN ISO 10930 by amendment to BS ISO 10930:2012
  • BS EN ISO 11269-1:2012Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
    Implementation of European Standard EN ISO 11269-1 by amendment to BS ISO 11269-1:2012
  • BS EN ISO 11357-7:2013Plastics. Differential scanning calorimetry. Determination of crystallization kinetics
    Implementation of European Standard EN ISO 11357-7 by amendment to BS ISO 11357-7:2002
  • BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
    Implementation of European Standard EN ISO 19712-3 by amendment to BS ISO 19712-3:2007

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 2721:2013 Photography. Film-based cameras. Automatic controls of exposure
  • BS ISO 4000-1:2013 Passenger car tyres and rims. Tyres (metric series)
    Supersedes BS ISO 4000-1:2010
  • BS ISO 6195:2013 Fluid power systems and components. Cylinder rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
    Supersedes BS ISO 6195:2002
  • BS ISO 6265:2013 Alpine skis. Determination of deformation load and breaking load
  • BS ISO 6266:2013 Alpine skis. Determination of fatigue indexes. Cyclic loading test
  • BS ISO 6747:2013 Earth-moving machinery. Dozers. Terminology and commercial specifications
    Supersedes BS 6914-6:1999
  • BS ISO 7539-10:2013 Corrosion of metals and alloys. Stress corrosion testing. Reverse U-bend method
  • BS ISO 7790:2013 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
    Supersedes BS ISO 7790:1997
  • BS ISO 8536-7:2009 Infusion equipment for medical use. Caps made of aluminium-plastics combinations for infusion bottles
  • BS ISO 10115:2013 Essential oil of tarragon (Artemisia dracunculus L.)
  • BS ISO 10315:2013 Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method
    Supersedes BS ISO 10315:2000+A1:2011
  • BS ISO 10987:2012 Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting
  • BS ISO 11711-1:2013 Ships and marine technology. Piping and machinery. Ballast water sampling and analysis. Discharge sampling port
  • BS ISO 11843-6:2013 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
  • BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics. Oxide-ion-conducting solid electrolytes
  • BS ISO 12655:2013 Energy performance of buildings. Presentation of measured energy use of buildings
  • BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearing strength
  • BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
  • BS ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
  • BS ISO 13196:2013 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
  • BS ISO 13926-3:2012 Pen systems. Seals for pen-injectors for medical use
  • BS ISO 14117:2012 Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
  • BS ISO 14346:2013 Static design procedure for welded hollow section joints. Recommendations
  • BS ISO 14404-1:2013 Calculation method of carbon dioxide emission intensity from iron and steel production. Steel plant with blast furnace
  • BS ISO 14404-2:2013 Calculation method of carbon dioxide emission intensity from iron and steel production. Steel plant with electric arc furnace (EAF)
  • BS ISO 14540:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
  • BS ISO 14541:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
  • BS ISO/IEC 15504-5:2012 Information technology. Process assessment. An exemplar software life cycle process assessment model
    Supersedes BS ISO/IEC 15504-5:2006
  • BS ISO/IEC 15962:2013 Information technology. Radio frequency identification (RFID) for item management. Data protocol: data encoding rules and logical memory functions
    Supersedes BS ISO/IEC 15962:2004
  • BS ISO 16049-1:2013 Air cargo equipment. Restraint straps. Design criteria and testing methods
    Supersedes BS ISO 16049-1:2001
  • BS ISO 16304:2013 Ships and marine technology. Marine environment protection. Arrangement and management of port waste reception facilities
  • BS ISO 16446:2013 Ships and marine technology. Marine environment protection. Adapter for joining dissimilar boom connectors
    Supersedes BS ISO 16446:2002
  • BS ISO 16635-1:2013 Dentistry. Dental rubber dam technique. Hole punch
  • BS ISO 16844-1:2013 Road vehicles. Tachograph systems. Electrical connectors
  • BS ISO 17363:2013 Supply chain applications of RFID. Freight containers
    Supersedes BS ISO 17363:2007
  • BS ISO 18097:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature
  • BS ISO/IEC 18450:2013 Information technology. Telecommunications and information exchange between systems. Web Services Description Language (WSDL) for CSTA Phase III
  • BS ISO 18927:2013 Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
    Supersedes BS ISO 18927:2008
  • BS ISO 20653:2013 Road vehicles. Degrees of protection (IP code). Protection of electrical equipment against foreign objects, water and access
    Supersedes BS ISO 20653:2006
  • BS ISO 21218:2013 Intelligent transport systems. Communications access for land mobiles (CALM). Access technology support
    Supersedes BS ISO 21218:2008
  • BS ISO 21601:2013 Corrosion of metals and alloys. Guidelines for assessing the significance of stress corrosion cracks detected in service
  • BS ISO 22201-2:2013 Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications. Escalators and moving walks (PESSRAE)
  • BS ISO 22891:2013 Paper. Determination of transmittance by diffuse reflectance measurement
    Supersedes BS ISO 22891:2007
  • BS ISO 23480:2013 Tools for pressing. Sliding plates
    Supersedes BS ISO 23480:2008
  • BS ISO 24611:2012 Language resource management. Morphosyntactic annotation framework (MAF)
  • BS ISO/IEC 26555:2013 Software and systems engineering. Tools and methods for product line technical management
  • BS ISO 26683-1:2013 Intelligent transport systems. Freight land conveyance content identification and communication. Context, architecture and referenced standards
  • BS ISO 28005-1:2013 Security management systems for the supply chain. Electronic port clearance (EPC). Message structures
    Supersedes PD ISO/PAS 28005-1:2012
  • BS IEC 62671:2013 Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality

PUBLISHED DOCUMENTS

  • PD CEN/TS 1555-7:2013 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity
    Supersedes DD CEN/TS 1555-7:2003
  • PD ISO/TR 10295-3:2012 Fire tests for building elements and components. Fire testing of service installations. Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
  • PD CEN/TR 10317:2013 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
    Supersedes PD CEN/TR 10317:2009
  • PD CEN/TR 10350:2013 Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
    Supersedes PD CEN/TR 10350:2009
  • PD CEN/TS 13388:2013 Copper and copper alloys. Compendium of compositions and products
    Supersedes DD CEN/TS 13388:2008
  • PD ISO/TR 14345:2012 Fatigue. Fatigue testing of welded components. Guidance
  • PD CEN/TR 15371:2013 Safety of toys. Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8
    Supersedes PD CEN/TR 15371:2009
  • PD CEN/TS 15518-4:2013 Winter maintenance equipment. Road weather information systems. Test methods for stationary equipment
  • PD CEN/TR 15993:2013 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
    Supersedes PD CEN/TR 15993:2010
  • PD CEN/TS 16429:2013 Stationary source emissions. Sampling and determination of hydrogen chloride content in ducts and stacks. Infrared analytical technique
  • PD CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007. Fly ash for concrete
  • PD CEN/TR 16468:2013 Food analysis. Determination of pesticide residues by GC-MS. Retention times, mass spectrometric parameters and detector response information
  • PD CEN/TR 16469:2013 Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements calibration methods and field measurements
  • PD ISO/TR 19319:2013 Surface chemical analysis. Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
    Supersedes PD ISO/TR 19319:2003
  • PD ISO/PAS 28004-4:2013 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
  • PD CLC/TS 50131-2-8:2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors
  • PD IEC/TR 61282-10:2013 Fibre optic communication system design guides. Characterization of the quality of optical vector-modulated signals with the error vector magnitude
  • PD IEC/TR 61850-1:2013 Communication networks and systems for power utility automation. Introduction and overview
    Supersedes PD IEC/TR 61850-1:2003
  • PD IEC/TR 61850-90-7:2013 Communication networks and systems for power utility automation. Object models for power converters in distributed energy resources (DER) systems

PUBLICLY AVAILABLE SPECIFICATIONS

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 1192-2:2013 Specification for information management for the capital/delivery phase of construction projects using building information modelling

CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 8487:2007+A1:2013 The design and construction of gas boosters used in association with combustion equipment. Specification
    AMENDMENT 1
  • BS EN 1991-3:2006 Eurocode 1. Actions on structures. Actions induced by cranes and machinery
    CORRIGENDUM 2
  • BS EN ISO 6346:1995+A3:2012 Freight containers. Coding, identification and marking
    AMENDMENT 3
  • BS EN ISO 10930:2013 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
    CORRIGENDUM 1
  • BS EN ISO 11073-10415:2011 Health informatics. Personal health device communication. Device specialization. Weighing scale
    CORRIGENDUM 1
  • BS EN ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
    CORRIGENDUM 1
  • BS EN ISO 11357-7:2013 Plastics. Differential scanning calorimetry. Determination of crystallization kinetics
    CORRIGENDUM 1
  • BS EN 13036-4:2011 Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface: The pendulum test
    CORRIGENDUM 1
  • BS EN 13795:2011+A1:2013 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
    AMENDMENT 1
  • BS EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification
    AMENDMENT 1
  • BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
    CORRIGENDUM 1
  • BS EN ISO 22435:2007+A1:2012 Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
    AMENDMENT 1
  • BS EN ISO 26986:2012 Resilient floor coverings. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification
    CORRIGENDUM 1
  • BS EN 60947-5-2:2007+A1:2012 Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches
    AMENDMENT 1
  • BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Single mode fibre pigtailed style optical fuse for category C. Controlled environment
    CORRIGENDUM 1
  • BS EN 62282-6-100:2010+A1:2012 Fuel cell technologies. Micro fuel cell power systems. Safety
    AMENDMENT 1
  • BS ISO/IEC 9798-2:2008 Information technology. Security techniques. Entity authentication. Mechanisms using symmetric encipherment algorithms
    CORRIGENDUM 3
  • BS ISO/IEC 9899:2011 Information technology. Programming languages. C
    CORRIGENDUM 1
  • BS ISO 11093-8:2012 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
    CORRIGENDUM 1
  • PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
    CORRIGENDUM 1
  • BS ISO/IEC 18000-63:2013 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz Type C
    CORRIGENDUM 1
  • BS ISO/IEC 19784-4:2011 Information technology. Biometric application programming interface. Biometric sensor function provider interface
    CORRIGENDUM 1
  • DD CLC/TS 50131-7:2010 Alarm systems. Intrusion and hold-up systems. Application guidelines
    CORRIGENDUM 1
  • PD IEC/TR 62732:2012 Three-digit code for designation of colour rendering and correlated colour temperature
    CORRIGENDUM 1
  • DD ISO/TS 19218-1:2011+A1:2013 Medical devices. Hierarchical coding structure for adverse events. Event-type codes
    AMENDMENT 1
  • BS S 524:1969+A4:2013 Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 800 MPa)
    AMENDMENT 4
  • BS S 536:1970+A2:2013 Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel sheet and strip (500 MPa)
    AMENDMENT 2
  • BS S 537:1970+A2:2013 Specification for low carbon 17/12 chromium-nickel- molybdenum corrosion-resisting steel sheet and strip (500 MPa)
    AMENDMENT 2
  • BS T 78:1997+A1:2013 Specification for 21?2 % nickel-chromium-molybdenum steel tubes (1390 MPa)
    AMENDMENT 1
  • BS T 80:1997+A1:2013 Specification for 12 % chromium corrosion resisting steel tubes (770 MPa)
    AMENDMENT 1
  • BS 2HC 101:1989+A3:2013 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2 5, Mo 1.5)
    AMENDMENT 3

BRITISH STANDARDS WITHDRAWN

  • BS 3900-A10:1998 (ISO 3233:1998) Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
    Superseded by BS EN ISO 3233-1:2013
  • BS 4579-2:1973 Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in nickel, iron and plated copper conductors
    This standard is withdrawn as it conflicts with international standards and it is not suitable for further revision
  • BS 6860:1987 (ISO 5526:1986) Nomenclature for cereals, pulses and other food grains
    Superseded by BS EN ISO 5526:2013
  • BS 6914-6:1999 (ISO 6747:1998) Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for self-propelled crawler and wheel tractors and their equipment
    Superseded by BS ISO 6747:2013
  • DD CEN/TS 1555-7:2003 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity
    Superseded by PD CEN/TS 1555-7:2013
  • BS EN 12761-1:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. General
    Superseded by BS EN ISO 16119-1:2013
  • BS EN 12761-2:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Field crop sprayers
    Superseded by BS EN ISO 16119-2:2013
  • BS EN 12761-3:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Air-assisted sprayers for bush and tree crops
    Superseded by BS EN ISO 16119-3:2013
  • BS EN 13002-2:1999 Carbon fibre yarns. Test methods and general specifications
    This standard is withdrawn as it is no longer relevant
  • BS EN 13135-1:2003+A1:2010 Cranes. Equipment. Electrotechnical equipment
    Superseded by BS EN 13135:2013
  • BS EN 13135-2:2004+A1:2010 Cranes. Equipment. Non-electrotechnical equipment
    Superseded by BS EN 13135:2013
  • DD ENV 13282:2000 Hydraulic road binders. Composition, specifications and conformity criteria
    Superseded by BS EN 13282-1:2013
  • DD CEN/TS 13388:2008 Copper and copper alloys. Compendium of compositions and products
    Superseded by PD CEN/TS 13388:2013
  • BS EN 24492:1993 (ISO 4492:1985) Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
    Superseded by BS EN ISO 4492:2013
  • BS EN 60335-1:2002+A2:2006 Household and similar electrical appliances. Safety. General requirements
    Superseded by BS EN 60335-1:2002+A14:2010
  • BS EN 60335-2-3:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for electric irons
    Superseded by BS EN 60335-2-3:2002+A2:2008
  • BS EN 60335-2-3:2002+A2:2008 Household and similar electric appliances. Safety. Particular requirements for electric irons
    Superseded by BS EN 60335-2-3:2002+A11:2010
  • BS EN 60335-2-6:2003 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
    Superseded by BS EN 60335-2-6:2003+A2:2008
  • BS EN 60335-2-6:2003+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hodi

    Issue 49 – May 2013

    You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

    BRITISH PUBLICATIONS

    The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

    • BS 5410-2:2013 Code of practice for oil firing. Installations over 45 kW output capacity for space heating, hot water and steam supply services
      Supersedes BS 5410-2:1978
    • BS 5839-1:2013 Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
      Supersedes BS 5839-1:2002+A2:2008
    • BS 5839-8:2013 Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of voice alarm systems
      Supersedes BS 5839-8:2008
    • BS 8568:2013 Cleanroom energy. Code of practice for improving energy efficiency in cleanrooms and clean air devices

    BS EN PUBLICATIONS

    The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

    • BS EN ISO 105-E02:2013 Textiles. Tests for colour fastness. Colour fastness to sea water
      Supersedes BS EN ISO 105-E02:1996
    • BS EN 228:2012 Automotive fuels. Unleaded petrol. Requirements and test methods
      Supersedes BS EN 228:2008
    • BS EN 302-1:2013 Adhesives for load-bearing timber structures. Test methods. Determination of longitudinal tensile shear strength
      Supersedes BS EN 302-1:2004
    • BS EN 302-2:2013 Adhesives for load-bearing timber structures. Test methods. Determination of resistance to delamination
      Supersedes BS EN 302-2:2004
    • BS EN 302-3:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
      Supersedes BS EN 302-3:2004
    • BS EN 302-4:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the effects of wood shrinkage on the shear strength
      Supersedes BS EN 302-4:2004
    • BS EN 302-6:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the minimum pressing time under referenced conditions
      Supersedes BS EN 302-6:2004
    • BS EN 302-7:2013 Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions
      Supersedes BS EN 302-7:2004
    • BS EN 480-15:2013 Admixtures for concrete, mortar and grout. Test methods. Reference concrete and method for testing viscosity modifying admixtures
    • BS EN ISO 717-1:2013 Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation
      Supersedes BS EN ISO 717-1:1997
    • BS EN ISO 717-2:2013 Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation
      Supersedes BS EN ISO 717-2:1997
    • BS EN 823:2013 Thermal insulating products for building applications. Determination of thickness
      Supersedes BS EN 823:1995
    • BS EN 824:2013 Thermal insulating products for building applications. Determination of squareness
      Supersedes BS EN 824:1995
    • BS EN 825:2013 Thermal insulating products for building applications. Determination of flatness
      Supersedes BS EN 825:1995
    • BS EN 826:2013 Thermal insulating products for building applications. Determination of compression behaviour
      Supersedes BS EN 826:1996
    • BS EN 1080:2013 Impact protection helmets for young children
      Supersedes BS EN 1080:1997
    • BS EN 1242:2013 Adhesives. Determination of isocyanate content
      Supersedes BS EN 1242:2005
    • BS EN 1316-1:2012 Hardwood round timber. Qualitative classification. Oak and beech
      Supersedes BS EN 1316-1:1997
    • BS EN 1602:2013 Thermal insulating products for building applications. Determination of the apparent density
      Supersedes BS EN 1602:1997
    • BS EN 1603:2013 Thermal insulating products for building applications. Determination of dimensional stability under constant normal laboratory conditions (23ºC/50% relative humidity)
      Supersedes BS EN 1603:1997
    • BS EN 1604:2013 Thermal insulating products for building applications. Determination of dimensional stability under specified temperature and humidity conditions
      Supersedes BS EN 1604:1996
    • BS EN 1605:2013 Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
      Supersedes BS EN 1605:1997
    • BS EN 1606:2013 Thermal insulating products for building applications. Determination of compressive creep
      Supersedes BS EN 1606:1997
    • BS EN 1796:2013 Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
      Supersedes BS EN 1796:2006+A1:2008
    • BS EN ISO 1833-22:2013 Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)
    • BS EN ISO 1833-26:2013 Textiles. Quantitative chemical analysis. Mixtures of melamine and cotton or aramide fibres (method using hot formic acid)
    • BS EN 1910:2013 Wood flooring and wood panelling and cladding. Determination of dimensional stability
      Supersedes BS EN 1910:2000
    • BS EN 2840:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Mineral oil resistant. Hardness 50 IRHD
    • BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
    • BS EN ISO 3233-1:2013 Paints and varnishes. Determination of the percentage volume of non-volatile matter. Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
      Supersedes BS 3900-A10:1998
    • BS EN 3698:2013 Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 70 IRHD
    • BS EN ISO 4492:2013 Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
      Supersedes BS EN 24492:1993
    • BS EN 4628:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ? 200 mm. 1150 MPa ? Rm ? 1300 MPa
      Supersedes BS EN 4628:2007
    • BS EN 4629:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Softened. Forging stock. De ? 300 mm
      Supersedes BS EN 4629:2007
    • BS EN 4631:2013 Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ? 200 mm. 900 MPa ? Rm ? 1050 MPa
      Supersedes BS EN 4631:2007
    • BS EN ISO 5526:2013 Cereals, pulses and other food grains. Nomenclature
      Supersedes BS 6860:1987
    • BS EN ISO 8536-4:2013 Infusion equipment for medical use. Infusion sets for single use, gravity feed
      Supersedes BS EN ISO 8536-4:2010
    • BS EN 9104-001:2013 Aerospace series. Quality management systems. Requirements for Aviation, Space, and Defence Quality Management System Certification Programs
    • BS EN ISO 10323:2013 Dentistry. Bore diameters for rotary instruments such as discs and wheels
      Supersedes BS EN ISO 10323:1996
    • BS EN 12085:2013 Thermal insulating products for building applications. Determination of linear dimensions of test specimens
      Supersedes BS EN 12085:1997
    • BS EN 12086:2013 Thermal insulating products for building applications. Determination of water vapour transmission properties
      Supersedes BS EN 12086:1997
    • BS EN 12089:2013 Thermal insulating products for building applications. Determination of bending behaviour
      Supersedes BS EN 12089:1997
    • BS EN 12090:2013 Thermal insulating products for building applications. Determination of shear behaviour
      Supersedes BS EN 12090:1997
    • BS EN 12091:2013 Thermal insulating products for building applications. Determination of freeze-thaw resistance
      Supersedes BS EN 12091:1997
    • BS EN ISO 12217-1:2013 Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m
      Supersedes BS EN ISO 12217-1:2002+A1:2009
    • BS EN ISO 12217-2:2013 Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
      Supersedes BS EN ISO 12217-2:2002
    • BS EN ISO 12217-3:2013 Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m
      Supersedes BS EN ISO 12217-3:2002+A1:2009
    • BS EN 12430:2013 Thermal insulating products for building applications. Determination of behaviour under point load
      Supersedes BS EN 12430:1998
    • BS EN 12431:2013 Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
      Supersedes BS EN 12431:1998
    • BS EN 12750:2013 Safety of woodworking machines. Four sided moulding machines
      Supersedes BS EN 12750:2001+A1:2009
    • BS EN 12786:2013 Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards
      Supersedes BS EN 12786:1999
    • BS EN 13135:2013 Cranes. Safety. Design. Requirements for equipment
      Supersedes BS EN 13135-1:2003+A1:2010 and BS EN 13135-2:2004+A1:2010
    • BS EN 13282-1:2013 Hydraulic road binders. Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria
      Supersedes DD ENV 13282:2000
    • BS EN 13282-3:2013 Hydraulic road binders. Conformity evaluation
    • BS EN 13442:2013 Wood flooring and wood panelling and cladding. Determination of the resistance to chemical agents
      Supersedes BS EN 13442:2002
    • BS EN 13752:2012 Chemicals used for treatment of water intended for human consumption. Manganese dioxide
      Supersedes BS EN 13752:2009
    • BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
      Supersedes BS EN 13774:2003
    • BS EN 13804:2013 Foodstuffs. Determination of elements and their chemical species. General considerations and specific requirements
      Supersedes BS EN 13804:2002
    • BS EN 13984:2013 Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics
      Supersedes BS EN 13984:2004+A1:2006
    • BS EN 14274:2013 (BS 2000-508:2013) Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS)
      Supersedes BS EN 14274:2003
    • BS EN 14275:2013 (BS 2000-509:2013) Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers
      Supersedes BS EN 14275:2003
    • BS EN 14364:2013 Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints
      Supersedes BS EN 14364:2006+A1:2008
    • BS EN ISO 14644-10:2013 Cleanrooms and associated controlled environments. Classification of surface cleanliness by chemical concentration
    • BS EN 14654-2:2013 Management and control of operational activities in drain and sewer systems outside buildings. Rehabilitation
    • BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
      Supersedes BS EN 14678-1:2006+A1:2009
    • BS EN ISO 14720-2:2013 Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials. Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
    • BS EN ISO 14890:2013 Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
      Supersedes BS EN ISO 14890:2003
    • BS EN 15429-2:2012 Sweepers. Performance requirements and test methods
    • BS EN ISO 15874-1:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). General
      Supersedes BS EN ISO 15874-1:2003
    • BS EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes
      Supersedes BS EN ISO 15874-2:2003
    • BS EN ISO 15874-3:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings
      Supersedes BS EN ISO 15874-3:2003
    • BS EN ISO 15874-5:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system
      Supersedes BS EN ISO 15874-5:2003
    • BS EN ISO 16119-1:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. General
      Supersedes BS EN 12761-1:2001
    • BS EN ISO 16119-2:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Horizontal boom sprayers
      Supersedes BS EN 12761-2:2001
    • BS EN ISO 16119-3:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Sprayers for bush and tree crops
      Supersedes BS EN 12761-3:2001
    • BS EN ISO 16180:2013 Small craft. Navigation lights. Installation, placement and visibility
    • BS EN 16210:2013 Transportation loads. Measurement and evaluation of climatic and other loads. Data acquisition and general requirements for measuring equipment
    • BS EN 16230-1:2013 Leisure karts. Safety requirements and test methods for karts
    • BS EN 16289:2013 Glass packaging. Screw finishes for pressure capsules. MCA 7,5 RF finish
    • BS EN 16291-1:2013 Glass packaging. Screw finishes for pressure capsules. Returnable glass MCA 2 finish
    • BS EN 16291-2:2013 Glass packaging. Screw finishes for pressure capsules. One way glass MCA 2 finish
    • BS EN 16292:2013 Glass packaging. Screw finishes. Depressed threads
    • BS EN 16293:2013 Packaging. Glass packaging. Deep BVS finishes for still wines
    • BS EN 16301:2013 Natural stone test methods. Determination of sensitivity to accidental staining
    • BS EN 16325:2013 Guarantees of Origin related to energy. Guarantees of Origin for Electricity
    • BS EN 16352:2013 Logistics. Specifications for reporting crime incidents
    • BS EN 16445:2013 Ventilation for buildings. Air diffusion. Aerodynamic testing and rating for mixed flow application: non-isothermal procedure for cold jet
    • BS EN ISO 16911-1:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Manual reference method
    • BS EN ISO 16911-2:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Automated measuring systems
    • BS EN ISO 19001:2013 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
    • BS EN ISO 20795-1:2013 Dentistry. Base polymers. Denture base polymers
      Supersedes BS EN ISO 20795-1:2008
    • BS EN ISO 20795-2:2013 Dentistry. Base polymers. Orthodontic base polymers
      Supersedes BS EN ISO 20795-2:2010
    • BS EN ISO 21091:2013 Health informatics. Directory services for healthcare providers, subjects of care and other entities
    • BS EN ISO 21180:2013 Light conveyor belts. Determination of the maximum tensile strength
      Supersedes BS EN ISO 21180:2006
    • BS EN ISO 21181:2013 Light conveyor belts. Determination of the relaxed elastic modulus
      Supersedes BS EN ISO 21181:2006
    • BS EN ISO 21182:2013 Light conveyor belts. Determination of the coefficient of friction
      Supersedes BS EN ISO 21182:2006
    • BS EN ISO 22476-4:2012 Geotechnical investigation and testing. Field testing. Menard pressure meter test
      Partially supersedes BS 5930:1999+A2:2010
    • BS EN ISO 22476-5:2012 Geotechnical investigation and testing. Field testing. Flexible dilatometer test
      Partially supersedes BS 5930:1999+A2:2010
    • BS EN ISO 22476-7:2012 Geotechnical investigation and testing. Field testing. Borehole jack test
      Partially supersedes BS 5930:1999+A2:2010
    • BS EN ISO 23640:2013 In vitro diagnostic medical devices. Evaluation of stability of in vitro diagnostic reagents
      Supersedes BS EN ISO 23640:2011
    • BS EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
    • BS EN 50566:2013 Product standard to demonstrate compliance of radio frequency fields from hand-held and body-mounted wireless communication devices used by the general public (30 MHz – 6 GHz)
    • BS EN 60349-4:2013 Electric traction. Rotating electrical machines for rail and road vehicles. Permanent magnet synchronous electrical machines connected to an electronic converter
    • BS EN 61056-1:2012 General purpose lead-acid batteries (valve regulated types). General requirements, functional characteristics. Methods of test
      Supersedes BS EN 61056-1:2003
    • BS EN 61131-6:2012 Programmable controllers. Functional safety
    • BS EN 61280-2-2:2012 Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement
      Supersedes BS EN 61280-2-2:2008
    • BS EN 61400-4:2013 Wind turbines. Design requirements for wind turbine gearboxes
      Supersedes BS ISO 81400-4:2005
    • BS EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
      Supersedes BS EN 60439-4:2004
    • BS EN 61513:2013 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
      Supersedes BS IEC 61513:2011
    • BS EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof. Particular requirements and tests for variable transformers and power supply units incorporating variable transformers
    • BS EN 61674:2013 Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging
      Supersedes BS EN 61674:1998 which remains current
    • BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Single mode fibre pigtailed style optical fuse for category C. Controlled environment
    • BS EN 61772:2013 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
      Supersedes BS IEC 61772:2009
    • BS EN 61850-7-410:2013 Communication networks and systems for power utility automation. Basic communication structure. Hydroelectric power plants. Communication for monitoring and control
      Supersedes BS EN 61850-7-410:2007
    • BS EN 61993-2:2013 Maritime navigation and radiocommunication equipment and systems. Automatic Identification Systems (AIS). Class A shipborne equipment of the automatic identification system (AIS). Operational and performance requirements, methods of test and required test results
      Supersedes BS EN 61993-2:2002
    • BS EN 62271-101:2013 High-voltage switchgear and controlgear. Synthetic testing
      Supersedes BS EN 62271-101:2006+A1:2010
    • BS EN 62382:2013 Control systems in the process industry. Electrical and instrumentation loop check
      Supersedes BS EN 62382:2007
    • BS EN 62488-1:2013 Power line communication systems for power utility applications. Planning of analogue and digital power line carrier systems operating over EHV/HV/MV electricity grids
      Supersedes BS EN 60495:1994

    BS ENs IMPLEMENTED BY AMENDMENT

    • BS EN ISO 10930:2013 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
      Implementation of European Standard EN ISO 10930 by amendment to BS ISO 10930:2012
    • BS EN ISO 11269-1:2012Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
      Implementation of European Standard EN ISO 11269-1 by amendment to BS ISO 11269-1:2012
    • BS EN ISO 11357-7:2013Plastics. Differential scanning calorimetry. Determination of crystallization kinetics
      Implementation of European Standard EN ISO 11357-7 by amendment to BS ISO 11357-7:2002
    • BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
      Implementation of European Standard EN ISO 19712-3 by amendment to BS ISO 19712-3:2007

    BS IMPLEMENTATIONS

    BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

    • BS ISO 2721:2013 Photography. Film-based cameras. Automatic controls of exposure
    • BS ISO 4000-1:2013 Passenger car tyres and rims. Tyres (metric series)
      Supersedes BS ISO 4000-1:2010
    • BS ISO 6195:2013 Fluid power systems and components. Cylinder rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
      Supersedes BS ISO 6195:2002
    • BS ISO 6265:2013 Alpine skis. Determination of deformation load and breaking load
    • BS ISO 6266:2013 Alpine skis. Determination of fatigue indexes. Cyclic loading test
    • BS ISO 6747:2013 Earth-moving machinery. Dozers. Terminology and commercial specifications
      Supersedes BS 6914-6:1999
    • BS ISO 7539-10:2013 Corrosion of metals and alloys. Stress corrosion testing. Reverse U-bend method
    • BS ISO 7790:2013 Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
      Supersedes BS ISO 7790:1997
    • BS ISO 8536-7:2009 Infusion equipment for medical use. Caps made of aluminium-plastics combinations for infusion bottles
    • BS ISO 10115:2013 Essential oil of tarragon (Artemisia dracunculus L.)
    • BS ISO 10315:2013 Cigarettes. Determination of nicotine in smoke condensates. Gas-chromatographic method
      Supersedes BS ISO 10315:2000+A1:2011
    • BS ISO 10987:2012 Earth-moving machinery. Sustainability. Terminology, sustainability factors and reporting
    • BS ISO 11711-1:2013 Ships and marine technology. Piping and machinery. Ballast water sampling and analysis. Discharge sampling port
    • BS ISO 11843-6:2013 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
    • BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics. Oxide-ion-conducting solid electrolytes
    • BS ISO 12655:2013 Energy performance of buildings. Presentation of measured energy use of buildings
    • BS ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearing strength
    • BS ISO 12817:2013 Fibre-reinforced plastic composites. Determination of open-hole compression strength
    • BS ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
    • BS ISO 13196:2013 Soil quality. Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument
    • BS ISO 13926-3:2012 Pen systems. Seals for pen-injectors for medical use
    • BS ISO 14117:2012 Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
    • BS ISO 14346:2013 Static design procedure for welded hollow section joints. Recommendations
    • BS ISO 14404-1:2013 Calculation method of carbon dioxide emission intensity from iron and steel production. Steel plant with blast furnace
    • BS ISO 14404-2:2013 Calculation method of carbon dioxide emission intensity from iron and steel production. Steel plant with electric arc furnace (EAF)
    • BS ISO 14540:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
    • BS ISO 14541:2013 Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
    • BS ISO/IEC 15504-5:2012 Information technology. Process assessment. An exemplar software life cycle process assessment model
      Supersedes BS ISO/IEC 15504-5:2006
    • BS ISO/IEC 15962:2013 Information technology. Radio frequency identification (RFID) for item management. Data protocol: data encoding rules and logical memory functions
      Supersedes BS ISO/IEC 15962:2004
    • BS ISO 16049-1:2013 Air cargo equipment. Restraint straps. Design criteria and testing methods
      Supersedes BS ISO 16049-1:2001
    • BS ISO 16304:2013 Ships and marine technology. Marine environment protection. Arrangement and management of port waste reception facilities
    • BS ISO 16446:2013 Ships and marine technology. Marine environment protection. Adapter for joining dissimilar boom connectors
      Supersedes BS ISO 16446:2002
    • BS ISO 16635-1:2013 Dentistry. Dental rubber dam technique. Hole punch
    • BS ISO 16844-1:2013 Road vehicles. Tachograph systems. Electrical connectors
    • BS ISO 17363:2013 Supply chain applications of RFID. Freight containers
      Supersedes BS ISO 17363:2007
    • BS ISO 18097:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature
    • BS ISO/IEC 18450:2013 Information technology. Telecommunications and information exchange between systems. Web Services Description Language (WSDL) for CSTA Phase III
    • BS ISO 18927:2013 Imaging materials. Recordable compact disc systems. Method for estimating the life expectancy based on the effects of temperature and relative humidity
      Supersedes BS ISO 18927:2008
    • BS ISO 20653:2013 Road vehicles. Degrees of protection (IP code). Protection of electrical equipment against foreign objects, water and access
      Supersedes BS ISO 20653:2006
    • BS ISO 21218:2013 Intelligent transport systems. Communications access for land mobiles (CALM). Access technology support
      Supersedes BS ISO 21218:2008
    • BS ISO 21601:2013 Corrosion of metals and alloys. Guidelines for assessing the significance of stress corrosion cracks detected in service
    • BS ISO 22201-2:2013 Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications. Escalators and moving walks (PESSRAE)
    • BS ISO 22891:2013 Paper. Determination of transmittance by diffuse reflectance measurement
      Supersedes BS ISO 22891:2007
    • BS ISO 23480:2013 Tools for pressing. Sliding plates
      Supersedes BS ISO 23480:2008
    • BS ISO 24611:2012 Language resource management. Morphosyntactic annotation framework (MAF)
    • BS ISO/IEC 26555:2013 Software and systems engineering. Tools and methods for product line technical management
    • BS ISO 26683-1:2013 Intelligent transport systems. Freight land conveyance content identification and communication. Context, architecture and referenced standards
    • BS ISO 28005-1:2013 Security management systems for the supply chain. Electronic port clearance (EPC). Message structures
      Supersedes PD ISO/PAS 28005-1:2012
    • BS IEC 62671:2013 Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality

    PUBLISHED DOCUMENTS

    • PD CEN/TS 1555-7:2013 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity
      Supersedes DD CEN/TS 1555-7:2003
    • PD ISO/TR 10295-3:2012 Fire tests for building elements and components. Fire testing of service installations. Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
    • PD CEN/TR 10317:2013 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
      Supersedes PD CEN/TR 10317:2009
    • PD CEN/TR 10350:2013 Analysis of steels and irons. Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
      Supersedes PD CEN/TR 10350:2009
    • PD CEN/TS 13388:2013 Copper and copper alloys. Compendium of compositions and products
      Supersedes DD CEN/TS 13388:2008
    • PD ISO/TR 14345:2012 Fatigue. Fatigue testing of welded components. Guidance
    • PD CEN/TR 15371:2013 Safety of toys. Replies to requests for interpretation of EN 71-1, EN 71-2, and EN 71-8
      Supersedes PD CEN/TR 15371:2009
    • PD CEN/TS 15518-4:2013 Winter maintenance equipment. Road weather information systems. Test methods for stationary equipment
    • PD CEN/TR 15993:2013 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
      Supersedes PD CEN/TR 15993:2010
    • PD CEN/TS 16429:2013 Stationary source emissions. Sampling and determination of hydrogen chloride content in ducts and stacks. Infrared analytical technique
    • PD CEN/TR 16443:2013 Backgrounds to the revision of EN 450-1:2005+A1:2007. Fly ash for concrete
    • PD CEN/TR 16468:2013 Food analysis. Determination of pesticide residues by GC-MS. Retention times, mass spectrometric parameters and detector response information
    • PD CEN/TR 16469:2013 Hydrometry. Measurement of the rainfall intensity (liquid precipitation): requirements calibration methods and field measurements
    • PD ISO/TR 19319:2013 Surface chemical analysis. Fundamental approaches to determination of lateral resolution and sharpness in beam-based methods
      Supersedes PD ISO/TR 19319:2003
    • PD ISO/PAS 28004-4:2013 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
    • PD CLC/TS 50131-2-8:2012 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Shock detectors
    • PD IEC/TR 61282-10:2013 Fibre optic communication system design guides. Characterization of the quality of optical vector-modulated signals with the error vector magnitude
    • PD IEC/TR 61850-1:2013 Communication networks and systems for power utility automation. Introduction and overview
      Supersedes PD IEC/TR 61850-1:2003
    • PD IEC/TR 61850-90-7:2013 Communication networks and systems for power utility automation. Object models for power converters in distributed energy resources (DER) systems

    PUBLICLY AVAILABLE SPECIFICATIONS

    Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

    • PAS 1192-2:2013 Specification for information management for the capital/delivery phase of construction projects using building information modelling

    CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

    Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

    • BS 8487:2007+A1:2013 The design and construction of gas boosters used in association with combustion equipment. Specification
      AMENDMENT 1
    • BS EN 1991-3:2006 Eurocode 1. Actions on structures. Actions induced by cranes and machinery
      CORRIGENDUM 2
    • BS EN ISO 6346:1995+A3:2012 Freight containers. Coding, identification and marking
      AMENDMENT 3
    • BS EN ISO 10930:2013 Soil quality. Measurement of the stability of soil aggregates subjected to the action of water
      CORRIGENDUM 1
    • BS EN ISO 11073-10415:2011 Health informatics. Personal health device communication. Device specialization. Weighing scale
      CORRIGENDUM 1
    • BS EN ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
      CORRIGENDUM 1
    • BS EN ISO 11357-7:2013 Plastics. Differential scanning calorimetry. Determination of crystallization kinetics
      CORRIGENDUM 1
    • BS EN 13036-4:2011 Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface: The pendulum test
      CORRIGENDUM 1
    • BS EN 13795:2011+A1:2013 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
      AMENDMENT 1
    • BS EN 14314:2009+A1:2013 Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification
      AMENDMENT 1
    • BS EN ISO 19712-3:2013 Plastics. Decorative solid surfacing materials. Determination of properties. Solid surface shapes
      CORRIGENDUM 1
    • BS EN ISO 22435:2007+A1:2012 Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
      AMENDMENT 1
    • BS EN ISO 26986:2012 Resilient floor coverings. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification
      CORRIGENDUM 1
    • BS EN 60947-5-2:2007+A1:2012 Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches
      AMENDMENT 1
    • BS EN 61753-056-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Single mode fibre pigtailed style optical fuse for category C. Controlled environment
      CORRIGENDUM 1
    • BS EN 62282-6-100:2010+A1:2012 Fuel cell technologies. Micro fuel cell power systems. Safety
      AMENDMENT 1
    • BS ISO/IEC 9798-2:2008 Information technology. Security techniques. Entity authentication. Mechanisms using symmetric encipherment algorithms
      CORRIGENDUM 3
    • BS ISO/IEC 9899:2011 Information technology. Programming languages. C
      CORRIGENDUM 1
    • BS ISO 11093-8:2012 Paper and board. Testing of cores. Determination of natural frequency and flexural modulus by experimental modal analysis
      CORRIGENDUM 1
    • PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces. Human contact with surfaces at moderate temperature
      CORRIGENDUM 1
    • BS ISO/IEC 18000-63:2013 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz Type C
      CORRIGENDUM 1
    • BS ISO/IEC 19784-4:2011 Information technology. Biometric application programming interface. Biometric sensor function provider interface
      CORRIGENDUM 1
    • DD CLC/TS 50131-7:2010 Alarm systems. Intrusion and hold-up systems. Application guidelines
      CORRIGENDUM 1
    • PD IEC/TR 62732:2012 Three-digit code for designation of colour rendering and correlated colour temperature
      CORRIGENDUM 1
    • DD ISO/TS 19218-1:2011+A1:2013 Medical devices. Hierarchical coding structure for adverse events. Event-type codes
      AMENDMENT 1
    • BS S 524:1969+A4:2013 Specification for cold-rolled 18/10 chromium-nickel corrosion-resisting steel sheet and strip (titanium stabilized: 800 MPa)
      AMENDMENT 4
    • BS S 536:1970+A2:2013 Specification for low carbon 18/10 chromium-nickel corrosion-resisting steel sheet and strip (500 MPa)
      AMENDMENT 2
    • BS S 537:1970+A2:2013 Specification for low carbon 17/12 chromium-nickel- molybdenum corrosion-resisting steel sheet and strip (500 MPa)
      AMENDMENT 2
    • BS T 78:1997+A1:2013 Specification for 21?2 % nickel-chromium-molybdenum steel tubes (1390 MPa)
      AMENDMENT 1
    • BS T 80:1997+A1:2013 Specification for 12 % chromium corrosion resisting steel tubes (770 MPa)
      AMENDMENT 1
    • BS 2HC 101:1989+A3:2013 Specification for precipitation hardening chromium-nickel-copper-molybdenum steel castings (950 MPa) (Cr 14.0, Ni 4.5, Cu 2 5, Mo 1.5)
      AMENDMENT 3

    BRITISH STANDARDS WITHDRAWN

    • BS 3900-A10:1998 (ISO 3233:1998) Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
      Superseded by BS EN ISO 3233-1:2013
    • BS 4579-2:1973 Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in nickel, iron and plated copper conductors
      This standard is withdrawn as it conflicts with international standards and it is not suitable for further revision
    • BS 6860:1987 (ISO 5526:1986) Nomenclature for cereals, pulses and other food grains
      Superseded by BS EN ISO 5526:2013
    • BS 6914-6:1999 (ISO 6747:1998) Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for self-propelled crawler and wheel tractors and their equipment
      Superseded by BS ISO 6747:2013
    • DD CEN/TS 1555-7:2003 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity
      Superseded by PD CEN/TS 1555-7:2013
    • BS EN 12761-1:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. General
      Superseded by BS EN ISO 16119-1:2013
    • BS EN 12761-2:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Field crop sprayers
      Superseded by BS EN ISO 16119-2:2013
    • BS EN 12761-3:2001 Agricultural and forestry machinery. Sprayers and liquid fertilizer distributors. Environmental protection. Air-assisted sprayers for bush and tree crops
      Superseded by BS EN ISO 16119-3:2013
    • BS EN 13002-2:1999 Carbon fibre yarns. Test methods and general specifications
      This standard is withdrawn as it is no longer relevant
    • BS EN 13135-1:2003+A1:2010 Cranes. Equipment. Electrotechnical equipment
      Superseded by BS EN 13135:2013
    • BS EN 13135-2:2004+A1:2010 Cranes. Equipment. Non-electrotechnical equipment
      Superseded by BS EN 13135:2013
    • DD ENV 13282:2000 Hydraulic road binders. Composition, specifications and conformity criteria
      Superseded by BS EN 13282-1:2013
    • DD CEN/TS 13388:2008 Copper and copper alloys. Compendium of compositions and products
      Superseded by PD CEN/TS 13388:2013
    • BS EN 24492:1993 (ISO 4492:1985) Metallic powders, excluding powders for hardmetals. Determination of dimensional changes associated with compacting and sintering
      Superseded by BS EN ISO 4492:2013
    • BS EN 60335-1:2002+A2:2006 Household and similar electrical appliances. Safety. General requirements
      Superseded by BS EN 60335-1:2002+A14:2010
    • BS EN 60335-2-3:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for electric irons
      Superseded by BS EN 60335-2-3:2002+A2:2008
    • BS EN 60335-2-3:2002+A2:2008 Household and similar electric appliances. Safety. Particular requirements for electric irons
      Superseded by BS EN 60335-2-3:2002+A11:2010
    • BS EN 60335-2-6:2003 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
      Superseded by BS EN 60335-2-6:2003+A2:2008
    • BS EN 60335-2-6:2003+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
      Superseded by BS EN 60335-2-6:2003+A11:2010
    • BS EN 60335-2-10:2003 Specification for safety of household and similar electrical appliances. Particular requirements for floor treatment machines and wet scrubbing machines
      Superseded by BS EN 60335-2-10:2003+A1:2008
    • BS EN 60335-2-12:2003 Specification for safety of household and similar electrical appliances. Particular requirements for warming plates and similar appliances
      Superseded by BS EN 60335-2-12:2003+A1:2008
    • BS EN 60335-2-16:2003 Specification for safety of household and similar electrical appliances. Particular requirements for food waste disposers
      Superseded by BS EN 60335-2-16:2003+A1:2008
    • BS EN 60335-2-23:2003 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
      Superseded by BS EN 60335-2-23:2003+A1:2008
    • BS EN 60335-2-23:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
      Superseded by BS EN 60335-2-23:2003+A11:2010
    • BS EN 60335-2-26:2003 Specification for safety of household and similar electrical appliances. Particular requirements for clocks
      Superseded by BS EN 60335-2-26:2003+A1:2008
    • BS EN 60335-2-28:2003 Specification for safety of household and similar electrical appliances. Particular requirements for sewing machines
      Superseded by BS EN 60335-2-28:2003+A1:2008
    • BS EN 60335-2-44:2002 Specification for safety of household and similar electrical appliances. Particular requirements for ironers
      Superseded by BS EN 60335-2-44:2002+A1:2008
    • BS EN 60335-2-45:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for portable heating tools and similar appliances
      Superseded by BS EN 60335-2-45:2002+A1:2008
    • BS EN 60335-2-51:2003 Specification for safety of household and similar electrical appliances. Particular requirements for stationary circulation pumps for heating and service water installations
      Superseded by BS EN 60335-2-51:2003+A1:2008
    • BS EN 60335-2-52:2003 Specification for safety of household and similar electrical appliances. Particular requirements for oral hygiene appliances
      Superseded by BS EN 60335-2-52:2003+A1:2008
    • BS EN 60335-2-52:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for oral hygiene appliances
      Superseded by BS EN 60335-2-52:2003+A11:2010
    • BS EN 60335-2-55:2003 Specification for safety of household and similar electrical appliances. Particular requirements for electrical appliances for use with aquariums and garden ponds
      Superseded by BS EN 60335-2-55:2003+A1:2008
    • BS EN 60335-2-56:2003 Specification for safety of household and similar electrical appliances. Particular requirements for projectors and similar appliances
      Superseded by BS EN 60335-2-56:2003+A1:2008
    • BS EN 60335-2-65:2003 Specification for safety of household and similar electrical appliances. Particular requirements for air-cleaning appliances
      Superseded by BS EN 60335-2-65:2003+A1:2008
    • BS EN 60335-2-66:2003 Specification for safety of household and similar electrical appliances. Particular requirements for water-bed heaters
      Superseded by BS EN 60335-2-66:2003+A1:2008
    • BS EN 60335-2-78:2003 Specification for safety of household and similar electrical appliances. Particular requirements for outdoor barbecues
      Superseded by BS EN 60335-2-78:2003+A1:2008
    • BS EN 60335-2-82:2003 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for amusement machines and personal service machines
      Superseded by BS EN 60335-2-82:2003+A1:2008
    • BS EN 60335-2-83:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Heated gullies for roof drainage
      Superseded by BS EN 60335-2-83:2002+A1:2008
    • BS EN 60335-2-84:2003 Specification for safety of household and similar electrical appliances. Particular requirements for toilets
      Superseded by BS EN 60335-2-84:2003+A1:2008
    • BS EN 60335-2-85:2003 Specification for safety of household and similar electrical appliances. Particular requirements for fabric steamers
      Superseded by BS EN 60335-2-85:2003+A1:2008
    • BS EN 60335-2-101:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for vaporizers
      Superseded by BS EN 60335-2-101:2002+A1:2008
    • BS EN 60335-2-105:2005 Specification for safety of household and similar electrical appliances. Particular requirements for multifunctional shower cabinets
      Superseded by BS EN 60335-2-105:2005+A1:2008
    • BS EN 60335-2-105:2005+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for multifunctional shower cabinets
      Superseded by BS EN 60335-2-105:2005+A11:2010
    • BS EN 60439-4:2004 Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
      Superseded by BS EN 61439-4:2013
    • BS EN 60495:1994 Single sideband power-line carrier terminals
      Superseded by BS EN 62488-1:2013
    • BS EN 61243-3:1999 Live working. Voltage detectors. Two-pole low voltage type
      Superseded by BS EN 61243-3:2010
    • PD ISO/PAS 28005-1:2012 Ships and marine technology. Electronic port clearance (EPC). Message structures. Implementation of a maritime single window system
      Superseded by BS ISO 28005-1:2013
    • BS IEC 61513:2011 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
      Superseded by BS EN 61513:2013
    • BS IEC 61772:2009 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
      Superseded by BS EN 61772:2013
    • BS ISO 81400-4:2005 Wind turbines. Design and specification of gearboxes
      Superseded by BS EN 61400-4:2013
    • PD 0010:1997 The principles of good practice for information management
      This standard is withdrawn as it is no longer relevant

     

    n class="standard-title-in-list">Household and similar electrical appliances. Safety. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
    Superseded by BS EN 60335-2-89:2010
  • BS EN 60704-1:1997 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances. General requirements
    Superseded by BS EN 60704-1:2010
  • BS EN 60730-2-5:2002 Automatic electrical controls for household and similar use. Particular requirements for automatic electrical burner control systems
    Superseded by BS EN 60730-2-5:2002+A2:2010
  • BS EN 60730-2-15:1996 Automatic electrical controls for household and similar use. Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications
    Superseded by BS EN 60730-2-15:2010
  • BS EN 60730-2-16:1998 Automatic electrical controls for household and similar use. Particular requirements for automatic electrical water level controls of the float type for household and similar applications
    Superseded by BS EN 60730-2-15:2010
  • BS EN 60730-2-18:1999 Automatic electrical controls for household and similar use. Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
    Superseded by BS EN 60730-2-15:2010
  • BS EN 60832:1997 Specification for insulating poles (insulating sticks) and universal tool attachments (fittings) for live working
    Superseded by BS EN 60832-1:2010 and BS EN 60832-2:2010
  • BS EN 60950-1:2006 Information technology equipment. Safety. General requirements
    Superseded by BS EN 60950-1:2006+A1:2010
  • BS EN 61000-4-4:2004 Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test
    Superseded by BS EN 61000-4-4:2004+A1:2010
  • BS EN 62358:2004 Ferrite cores. Standard inductance factor (AL) and its tolerance
    Superseded by BS EN 62317-8:2006 and BS EN 62358:2013
  • BS ISO 7176-24:2004 Wheelchairs. Requirements and test methods for user-operated stair-climbing devices
    Superseded by BS ISO 7176-28:2012
  • DD ISO/TS 10004:2010 Quality management. Customer satisfaction. Guidelines for monitoring and measuring
    Superseded by BS ISO 10004:2012
  • BS ISO/IEC 14598-3:2000 Information technology. Software production evaluation. Process for developers
    Superseded by BS ISO/IEC 25041:2012
  • BS ISO/IEC 14598-4:1999 Information technology. Software production evaluation. Process for acquirers
    Superseded by BS ISO/IEC 25041:2012
  • BS ISO/IEC 14598-5:1998 Information technology. Software production evaluation. Process for evaluators
    Superseded by BS ISO/IEC 25041:2012
  • PD ISO/IEC TR 18047-6:2011 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz
    Superseded by BS ISO/IEC 18047-6:2012
  • BS ISO 23274:2007 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
    Superseded by BS ISO 23274-1:2013 and BS ISO 23274-2:2012

 


Superseded by BS EN 60335-2-6:2003+A11:2010
  • BS EN 60335-2-10:2003 Specification for safety of household and similar electrical appliances. Particular requirements for floor treatment machines and wet scrubbing machines
    Superseded by BS EN 60335-2-10:2003+A1:2008
  • BS EN 60335-2-12:2003 Specification for safety of household and similar electrical appliances. Particular requirements for warming plates and similar appliances
    Superseded by BS EN 60335-2-12:2003+A1:2008
  • BS EN 60335-2-16:2003 Specification for safety of household and similar electrical appliances. Particular requirements for food waste disposers
    Superseded by BS EN 60335-2-16:2003+A1:2008
  • BS EN 60335-2-23:2003 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
    Superseded by BS EN 60335-2-23:2003+A1:2008
  • BS EN 60335-2-23:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
    Superseded by BS EN 60335-2-23:2003+A11:2010
  • BS EN 60335-2-26:2003 Specification for safety of household and similar electrical appliances. Particular requirements for clocks
    Superseded by BS EN 60335-2-26:2003+A1:2008
  • BS EN 60335-2-28:2003 Specification for safety of household and similar electrical appliances. Particular requirements for sewing machines
    Superseded by BS EN 60335-2-28:2003+A1:2008
  • BS EN 60335-2-44:2002 Specification for safety of household and similar electrical appliances. Particular requirements for ironers
    Superseded by BS EN 60335-2-44:2002+A1:2008
  • BS EN 60335-2-45:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for portable heating tools and similar appliances
    Superseded by BS EN 60335-2-45:2002+A1:2008
  • BS EN 60335-2-51:2003 Specification for safety of household and similar electrical appliances. Particular requirements for stationary circulation pumps for heating and service water installations
    Superseded by BS EN 60335-2-51:2003+A1:2008
  • BS EN 60335-2-52:2003 Specification for safety of household and similar electrical appliances. Particular requirements for oral hygiene appliances
    Superseded by BS EN 60335-2-52:2003+A1:2008
  • BS EN 60335-2-52:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for oral hygiene appliances
    Superseded by BS EN 60335-2-52:2003+A11:2010
  • BS EN 60335-2-55:2003 Specification for safety of household and similar electrical appliances. Particular requirements for electrical appliances for use with aquariums and garden ponds
    Superseded by BS EN 60335-2-55:2003+A1:2008
  • BS EN 60335-2-56:2003 Specification for safety of household and similar electrical appliances. Particular requirements for projectors and similar appliances
    Superseded by BS EN 60335-2-56:2003+A1:2008
  • BS EN 60335-2-65:2003 Specification for safety of household and similar electrical appliances. Particular requirements for air-cleaning appliances
    Superseded by BS EN 60335-2-65:2003+A1:2008
  • BS EN 60335-2-66:2003 Specification for safety of household and similar electrical appliances. Particular requirements for water-bed heaters
    Superseded by BS EN 60335-2-66:2003+A1:2008
  • BS EN 60335-2-78:2003 Specification for safety of household and similar electrical appliances. Particular requirements for outdoor barbecues
    Superseded by BS EN 60335-2-78:2003+A1:2008
  • BS EN 60335-2-82:2003 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for amusement machines and personal service machines
    Superseded by BS EN 60335-2-82:2003+A1:2008
  • BS EN 60335-2-83:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Heated gullies for roof drainage
    Superseded by BS EN 60335-2-83:2002+A1:2008
  • BS EN 60335-2-84:2003 Specification for safety of household and similar electrical appliances. Particular requirements for toilets
    Superseded by BS EN 60335-2-84:2003+A1:2008
  • BS EN 60335-2-85:2003 Specification for safety of household and similar electrical appliances. Particular requirements for fabric steamers
    Superseded by BS EN 60335-2-85:2003+A1:2008
  • BS EN 60335-2-101:2002 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for vaporizers
    Superseded by BS EN 60335-2-101:2002+A1:2008
  • BS EN 60335-2-105:2005 Specification for safety of household and similar electrical appliances. Particular requirements for multifunctional shower cabinets
    Superseded by BS EN 60335-2-105:2005+A1:2008
  • BS EN 60335-2-105:2005+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for multifunctional shower cabinets
    Superseded by BS EN 60335-2-105:2005+A11:2010
  • BS EN 60439-4:2004 Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (ACS)
    Superseded by BS EN 61439-4:2013
  • BS EN 60495:1994 Single sideband power-line carrier terminals
    Superseded by BS EN 62488-1:2013
  • BS EN 61243-3:1999 Live working. Voltage detectors. Two-pole low voltage type
    Superseded by BS EN 61243-3:2010
  • PD ISO/PAS 28005-1:2012 Ships and marine technology. Electronic port clearance (EPC). Message structures. Implementation of a maritime single window system
    Superseded by BS ISO 28005-1:2013
  • BS IEC 61513:2011 Nuclear power plants. Instrumentation and control important to safety. General requirements for systems
    Superseded by BS EN 61513:2013
  • BS IEC 61772:2009 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
    Superseded by BS EN 61772:2013
  • BS ISO 81400-4:2005 Wind turbines. Design and specification of gearboxes
    Superseded by BS EN 61400-4:2013
  • PD 0010:1997 The principles of good practice for information management
    This standard is withdrawn as it is no longer relevant
  •  

    Published in international.