ASTM Standards

Issue 49 – May 2013

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A74 Standard Specification for Cast Iron Soil Pipe and Fittings has been revised to A74-13 developed by Committee A04.12, ASTM BOS Volume 01.02.
  • A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings has been revised to A90/A90M-13 developed by Committee A05.07, ASTM BOS Volume 01.06.
  • A275/A275M Standard Practice for Magnetic Particle Examination of Steel Forgings has been reapproved, available as A275/A275M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A324 Standard Specification for Ferrotitanium has been reapproved, available as A324-08(2013) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems has been revised (with designation change) to A380/A380M developed by Committee A01.14, ASTM BOS Volume 01.03.
  • A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire has been reapproved, available as A411-08(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A456/A456M Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings has been reapproved, available as A456/A456M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A459 Standard Specification for Zinc-Coated Flat Steel Armoring Tape has been reapproved, available as A459-08(2013) developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A474 Standard Specification for Aluminum-Coated Steel Wire Strand has been reapproved, available as A474-03(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels has been revised to A479/A479M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings has been revised to A484/A484M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy has been revised to A494/A494M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A504/A504M Standard Specification for Wrought Carbon Steel Wheels has been reapproved, available as A504/A504M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel has been revised to A510/A510M-13 developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications has been reapproved, available as A551/A551M-08(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A580/A580M Standard Specification for Stainless Steel Wire has been revised to A580/A580M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A636 Standard Specification for Nickel Oxide Sinter has been reapproved, available as A636-08(2013) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability has been editorially changed, available as A656/A656M-12ae1 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe has been revised to A742/A742M-13 developed by Committee A05.17, ASTM BOS Volume 01.06.
  • A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire has been reapproved, available as A809-08(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire has been reapproved, available as A854/A854M-08(2013) developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A875/A875M Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process has been revised to A875/A875M-13 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications has been revised to A888-13 developed by Committee A04.12, ASTM BOS Volume 01.02.
  • A915/A915M Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades has been reapproved, available as A915/A915M-08(2013) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process has been revised to A924/A924M-13 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A1079 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galv-annealed) by the Hot-Dip Process has been revised to A1079-13 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) is a new standard, now available. A1085-13 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • B2 Standard Specification for Medium-Hard-Drawn Copper Wire has been editorially changed, available as B2-12e1 developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B22 Standard Specification for Bronze Castings for Bridges and Turntables has been revised to B22-13 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use has been revised to B100-13 developed by Committee B05.01, ASTM BOS Volume 02.01.
  • B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes has been revised to B124/B124M-13 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets has been revised to B130-13 developed by Committee B05.01, ASTM BOS Volume 02.01.
  • B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar has been reapproved, available as B196/B196M-07(2013) developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B197/B197M Standard Specification for Copper-Beryllium Alloy Wire has been reapproved, available as B197/B197M-07(2013) developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire has been revised to B250/B250M-13 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service has been revised to B280-13 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B306 Standard Specification for Copper Drainage Tube (DWV) has been revised to B306-13 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes has been reapproved, available as B398/B398M-02(2013) developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B415 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire has been reapproved, available as B415-98(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors has been reapproved, available as B416-98(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors has been revised to B496-13 developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B584 Standard Specification for Copper Alloy Sand Castings for General Applications has been revised to B584-13 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding has been revised to B694-13 developed by Committee B05.01, ASTM BOS Volume 02.01.
  • B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors has been revised to B738-13 developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B763 Standard Specification for Copper Alloy Sand Castings for Valve Applications has been revised to B763-13 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B786 Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation has been reapproved, available as B786-08(2013) developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) has been editorially changed, available as B857-11e2 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire has been reapproved, available as B869-07(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B910/B910M Standard Specification for Annealed Copper-Clad Steel Wire has been reapproved, available as B910/B910M-07(2013) developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B961 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application has been revised to B961-13 developed by Committee B01.02, ASTM BOS Volume 02.03.
  • B986 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application is a new standard, now available. B986-13 developed by Committee B01.02, ASTM BOS Volume 02.03.
  • C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems has been revised to C11-13 developed by Committee C11.91, ASTM BOS Volume 04.01.
  • C12 Standard Practice for Installing Vitrified Clay Pipe Lines has been revised to C12-13 developed by Committee C04.20, ASTM BOS Volume 04.05.
  • C94/C94M Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-13 developed by Committee C09.40, ASTM BOS Volume 04.02.
  • C125 Standard Terminology Relating to Concrete and Concrete Aggregates has been revised to C125-13 developed by Committee C09.91, ASTM BOS Volume 04.02.
  • C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units has been revised to C140-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C478 Standard Specification for Precast Reinforced Concrete Manhole Sections has been revised to C478-13 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric) has been revised to C478M-13 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C494/C494M Standard Specification for Chemical Admixtures for Concrete has been revised to C494/C494M-13 developed by Committee C09.23, ASTM BOS Volume 04.02.
  • C595/C595M Standard Specification for Blended Hydraulic Cements has been revised to C595/C595M-13 developed by Committee C01.10, ASTM BOS Volume 04.01.
  • C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast has been reinstated, with revision to C935-13 developed by Committee C27.20, ASTM BOS Volume 04.05.
  • C1026 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling has been revised (with title change) to C1026-13 developed by Committee C21.06, ASTM BOS Volume 15.02.
  • C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems has been editorially changed, available as C1242-12ae1 developed by Committee C18.06, ASTM BOS Volume 04.07.
  • C1332 Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique has been reapproved, available as C1332-01(2013) developed by Committee C28.03, ASTM BOS Volume 15.01.
  • C1341 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites has been revised to C1341-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
  • C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures has been revised to C1359-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
  • C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures has been revised to C1425-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
  • C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers has been revised to C1433-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) has been revised to C1433M-13a developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1468 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature has been revised to C1468-13 developed by Committee C28.07, ASTM BOS Volume 15.01.
  • C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections has been revised to C1513-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension has been reapproved, available as D412-06a(2013) developed by Committee D11.10, ASTM BOS Volume 09.01.
  • D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting has been revised to D1004-13 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D1129 Standard Terminology Relating to Water has been revised to D1129-13 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D1535 Standard Practice for Specifying Color by the Munsell System has been revised to D1535-13 developed by Committee E12.07, ASTM BOS Volume 06.01.
  • D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics has been revised to D1693-13 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D1932 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes has been revised to D1932-13 developed by Committee D09.01, ASTM BOS Volume 10.01.
  • D2457 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics has been revised to D2457-13 developed by Committee D20.40, ASTM BOS Volume 08.01.
  • D2595 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range has been editorially changed, available as D2595-96(2008)e1 developed by Committee D02.G0.03, ASTM BOS Volume 05.01.
  • D2749 Standard Symbols for Dimensions of Plastic Pipe Fittings has been revised to D2749-13 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • D2844/D2844M Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils has been revised (with designation change) to D2844/D2844M-13 developed by Committee D18.08, ASTM BOS Volume 04.08.
  • D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) has been editorially changed, available as D2872-12e1 developed by Committee D04.46, ASTM BOS Volume 04.03.
  • D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography has been revised to D2887-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.01.
  • D3012 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven has been revised to D3012-13 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D3060 Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products has been reapproved, available as D3060-94(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
  • D3061 Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans has been reapproved, available as D3061-97(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
  • D3064 Standard Terminology Relating To Aerosol Products has been reapproved, available as D3064-97(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
  • D3065 Standard Test Methods for Flammability of Aerosol Products has been reapproved, available as D3065-01(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
  • D3069 Standard Test Method for Delivery Rate of Aerosol Products has been reapproved, available as D3069-94(2013) developed by Committee D10.33, ASTM BOS Volume 15.10.
  • D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications has been revised to D3244-12 developed by Committee D02.94, ASTM BOS Volume 05.01.
  • D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials has been editorially changed, available as D3350-12e1 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D3594 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers has been reapproved, available as D3594-93(2013) developed by Committee D20.70, ASTM BOS Volume 08.02.
  • D3614 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions has been reapproved, available as D3614-07(2013) developed by Committee D22.01, ASTM BOS Volume 11.07.
  • D3686 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) has been revised to D3686-13 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells has been editorially changed, available as D3753-12e1 developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil has been revised to D3829-12 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D3955 Standard Specification for Electrical Insulating Varnishes has been revised to D3955-13 developed by Committee D09.01, ASTM BOS Volume 10.02.
  • D4000 Standard Classification System for Specifying Plastic Materials has been revised to D4000-13 developed by Committee D20.94, ASTM BOS Volume 08.02.
  • D4332 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing has been revised to D4332-13 developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane has been revised to D4637/D4637M-13 developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil has been revised to D4648/D4648M-13 developed by Committee D18.05, ASTM BOS Volume 04.08.
  • D4669 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols has been reapproved (with editorial change), available as D4469-07(2013)e1 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature has been revised to D4684-12 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D4733 Standard Test Methods for Solventless Electrical Insulating Varnishes has been revised to D4733-13 developed by Committee D09.01, ASTM BOS Volume 10.02.
  • D4765 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes has been revised (with title change) to D4765-13 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D4884 Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles has been revised (with title change) to D4884-13 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration has been revised to D4928-12 developed by Committee D02.02, ASTM BOS Volume 05.02.
  • D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit has been revised (with designation change) to D5030/D5030M-13 developed by Committee D18.08, ASTM BOS Volume 04.08.
  • D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists has been revised to D5055-13 developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D5071 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus has been reapproved, available as D5071-06(2013) developed by Committee D20.96, ASTM BOS Volume 08.03.
  • D5196 Standard Guide for Bio-Applications Grade Water has been reapproved, available as D5196-06(2013) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D5272 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics has been reapproved, available as D5272-08(2013) developed by Committee D20.96, ASTM BOS Volume 08.03.
  • D5280 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions has been reapproved, available as D5280-96(2013) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D5576 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) has been reapproved, available as D5576-00(2013) developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D5630 Standard Test Method for Ash Content in Plastics has been revised to D5630-13 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D5835 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations has been reapproved, available as D5835-95(2013) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D5836 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) has been reapproved, available as D5836-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils has been revised to D5918-13 developed by Committee D18.19, ASTM BOS Volume 04.09.
  • D5932 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace has been reapproved, available as D5932-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6209 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) has been revised to D6209-13 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D6246 Standard Practice for Evaluating the Performance of Diffusive Samplers has been reapproved, available as D6246-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus has been editorially changed, available as D6278-12e1 developed by Committee D02.07, ASTM BOS Volume 05.03.
  • D6289 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics has been revised to D6289-13 developed by Committee D20.09, ASTM BOS Volume 08.03.
  • D6321/D6321M Standard Practice for the Evaluation of Machine Washable T-Shirts has been revised (with designation change) to D6321/D6321M developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D6331 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) has been revised to D6331-13 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D6352 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography has been revised to D6352-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.03.
  • D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products has been revised to D6670-13 developed by Committee D22.05, ASTM BOS Volume 11.07.
  • D6803 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers has been revised to D6803-13 developed by Committee D22.05, ASTM BOS Volume 11.07.
  • D6817 Standard Specification for Rigid Cellular Polystyrene Geofoam has been revised to D6817-13 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer has been revised to D6821-12 developed by Committee D02.07, ASTM BOS Volume 05.03.
  • D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber has been revised to D6890-13 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature has been revised to D6896-12 developed by Committee D02.07, ASTM BOS Volume 05.03.
  • D6966 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals has been revised to D6966-13 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6978 Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs has been reapproved, available as D6978-05(2013) developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D6988 Standard Guide for Determination of Thickness of Plastic Film Test Specimens has been revised to D6988-13 developed by Committee D20.19, ASTM BOS Volume 08.03.
  • D7026 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis has been reinstated, with revision to D7026-13 developed by Committee D20.96, ASTM BOS Volume 08.03.
  • D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) has been revised to D7042-12a developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles has been revised to D7109-12 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7140/D7140M Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials has been revised (with designation change) to D7140/D7140M-13 developed by Committee D13.52, ASTM BOS Volume 07.02.
  • D7210 Standard Practice for Extraction of Additives in Polyolefin Plastics has been revised to D7210-13 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D7213 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography has been editorially changed, available as D7213-12e1 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer has been revised to D7224-12 developed by Committee D02.J0, ASTM BOS Volume 05.04.
  • D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer has been revised to D7261-12 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard) has been editorially changed, available as D7266-13e1 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D7387 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods) has been revised to D7387-13 developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D7441 Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples has been reapproved, available as D7441-08(2013) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D7500 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 to 735°C by Gas Chromatography has been revised to D7500-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7547 Standard Specification for Hydrocarbon Only Unleaded Aviation Gasoline has been revised (with title change) to D7547-12 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection has been revised to D7756-12 developed by Committee D02.H0, ASTM BOS Volume 05.04.
  • D7782 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data Editorial Review Board change D7782 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D7783 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data Editorial Review Board change D7783 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D7798 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538°C by Ultra Fast Gas Chromatography (UF GC) is a new standard, now available. D7798-13 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7807 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection is a new standard, now available. D7807-12 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge is a new standard, now available. D7830/D7830M-13 developed by Committee D18.08, ASTM BOS Volume 04.09.
  • D7853 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete is a new standard, now available. D7853-13 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D7859 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers is a new standard, now available. D7859-13 developed by Committee D22.05, ASTM BOS Volume 11.07.
  • E73 Standard Practice for Static Load Testing of Truss Assemblies has been revised to E73-13 developed by Committee E06.11, ASTM BOS Volume 04.11.
  • E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading has been reapproved, available as E855-08(2013) developed by Committee E28.02, ASTM BOS Volume 03.01.
  • E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings has been revised to E935-13 developed by Committee E06.56, ASTM BOS Volume 04.11.
  • E1384 Standard Practice for Content and Structure of the Electronic Health Record (EHR) has been reapproved, available as E1384-07(2013) developed by Committee E31.25, ASTM BOS Volume 14.01.
  • E1459 Standard Guide for Physical Evidence Labeling and Related Documentation has been revised to E1459-13 developed by Committee E30.11, ASTM BOS Volume 14.02.
  • E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods has been editorially changed, available as E1488-12e1 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E1633 Standard Specification for Coded Values Used in the Electronic Health Record has been reapproved, available as E1633-08(2013) developed by Committee E31.25, ASTM BOS Volume 14.01.
  • E1776 Standard Guide for Development of Fire-Risk-Assessment Standards has been revised to E1776-13 developed by Committee E05.33, ASTM BOS Volume 04.07.
  • E1953 Standard Practice for Description of Thermal Analysis and Rheology Apparatus has been reapproved, available as E1953-07(2013) developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E1994 Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans has been reapproved, available as E1994-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2161 Standard Terminology Relating to Performance Validation in Thermal Analysis has been revised to E2161-13 developed by Committee E37.03, ASTM BOS Volume 14.02.
  • E2178 Standard Test Method for Air Permeance of Building Materials has been revised to E2178-13 developed by Committee E06.41, ASTM BOS Volume 04.12.
  • E2248 Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens has been revised to E2248-13 developed by Committee E28.07, ASTM BOS Volume 03.01.
  • E2255 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings (Withdrawn 2013) has been withdrawn, with no replacement. E2255-04 developed by Committee E06.23, ASTM BOS Volume 04.12.
  • E2298 Standard Test Method for Instrumented Impact Testing of Metallic Materials has been revised to E2298-13 developed by Committee E28.07, ASTM BOS Volume 03.01.
  • E2306 Standard Practice for Disposal of Personal Property has been revised to E2306-13 developed by Committee E53.04, ASTM BOS Volume 04.12.
  • E2334 Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample has been reapproved, available as E2334-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2430 Standard Specification For Expanded Polystyrene (“EPS”) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (“EIFS”) has been reapproved, available as E2430-05(2013) developed by Committee E06.58, ASTM BOS Volume 04.12.
  • E2495 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition has been revised to E2495-13 developed by Committee E53.05, ASTM BOS Volume 04.12.
  • E2503 Standard Practice for Qualification of Basket and Paddle Dissolution Apparatus has been revised to E2503-13 developed by Committee E55.03, ASTM BOS Volume 14.02.
  • E2510 Standard Test Method for Torque Calibration or Conformance of Rheometers has been reapproved, available as E2510-07(2013) developed by Committee E37.08, ASTM BOS Volume 14.02.
  • E2523 Standard Terminology for Metalworking Fluids and Operations has been revised to E2523-13 developed by Committee E34.50, ASTM BOS Volume 11.03.
  • E2696 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution has been reapproved, available as E2696-09(2013) developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2809 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations is a new standard, now available. E2809-13 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E2909 Standard Guide for Investigation/Study/Assay Tab-Delimited Format for Nanotechnologies (ISA-TAB-Nano): Standard File Format for the Submission and Exchange of Data on Nanomaterials and Characterizations is a new standard, now available. E2909-13 developed by Committee E56.01, ASTM BOS Volume 14.02.
  • E2923 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry is a new standard, now available. E2923-13 developed by Committee E06.21, ASTM BOS Volume 04.12.
  • F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673) has been revised to F138-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F677 Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications has been revised to F677-13 developed by Committee D09.01, ASTM BOS Volume 10.02.
  • F767 Standard Test Method for Image Stability of Chemical Carbonless Paper to Light has been reapproved, available as F767-98(2013) developed by Committee F05.06, ASTM BOS Volume 15.09.
  • F788 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series has been revised to F788-13 developed by Committee F16.93, ASTM BOS Volume 01.08.
  • F833 Standard Consumer Safety Performance Specification for Carriages and Strollers has been revised to F833-13 developed by Committee F15.17, ASTM BOS Volume 15.11.
  • F858 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type has been reapproved (with editorial change), available as F858-07R13e1 developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F860 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type has been reapproved, available as F860-07(2013) developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F1021 Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines has been reapproved, available as F1021-95(2013) developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) has been revised to F1314-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F1351 Standard Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems has been reapproved, available as F1351-96(2013) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F1371 Standard Specification for Vegetable Peeling Machines, Electric has been revised to F1371-13 developed by Committee F26.04, ASTM BOS Volume 15.12.
  • F1405 Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method has been reapproved, available as F1405-08(2013) developed by Committee F05.06, ASTM BOS Volume 15.09.
  • F1427 Standard Consumer Safety Specification for Bunk Beds has been revised to F1427-13 developed by Committee F15.30, ASTM BOS Volume 15.11.
  • F1434 Standard Practice for Estimating the Performance of a Fuser Oil in an Electrostatic Copier or Printer has been reapproved, available as F1434-97(2013) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F1486 Standard Practice for Determination of Abrasion and Smudge Resistance of Images Produced from Office Products (GA-CAT Method) has been reapproved, available as F1486-96(2013) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F1623 Standard Terminology Relating to Thermal Imaging Products has been reapproved, available as F1623-96(2013) developed by Committee F05.01, ASTM BOS Volume 15.09.
  • F1700 Standard Specification for Solid Vinyl Floor Tile has been revised to F1700-13 developed by Committee F06.80, ASTM BOS Volume 15.04.
  • F1714 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices has been reapproved, available as F1714-96(2013) developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F2067 Standard Practice for Development and Use of Oil-Spill Trajectory Models has been revised to F2067-13 developed by Committee F20.16, ASTM BOS Volume 11.05.
  • F2083 Standard Specification for Knee Replacement Prosthesis has been revised to F2083-12 developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F2194 Standard Consumer Safety Specification for Bassinets and Cradles has been revised to F2194-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F2245 Standard Specification for Design and Performance of a Light Sport Airplane has been revised to F2245-13 developed by Committee F37.20, ASTM BOS Volume 15.11.
  • F2286 Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas has been reapproved, available as F2286-05(2013) developed by Committee F15.49, ASTM BOS Volume 15.11.
  • F2345 Standard Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads has been reapproved, available as F2345-03(2013) developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F2463 Standard Terminology for Livestock, Meat, and Poultry Evaluation Systems has been editorially changed, available as F2463-12be1 developed by Committee F10.50, ASTM BOS Volume 15.12.
  • F2508 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces has been revised to F2508-13 developed by Committee F13.10, ASTM BOS Volume 15.07.
  • F2632 Standard Practice for Determining the Toner Usage for Color Printer Cartridges has been editorially changed, available as F2632-07(2013)e1 developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F2897 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances) has been editorially changed, available as F2897-11ae1 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F2965 Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments is a new standard, now available. F2965-13 developed by Committee F13.50, ASTM BOS Volume 15.07.
  • F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications has been revised to F2989-13 developed by Committee F04.12, ASTM BOS Volume 13.02.
  • F3000/F3000M Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats is a new standard, now available. F3000/F3000M-13 developed by Committee F14.40, ASTM BOS Volume 01.06.
  • F3001 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion is a new standard, now available. F3001-13 developed by Committee F42.05, ASTM BOS Volume 10.04.
  • F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) has been revised to F606M-13 developed by Committee F16.01, ASTM BOS Volume 01.08.

 

Published in international.