Australian Standards

Issue 47 – March 2013

To purchase PDF or hard copy Australian Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

New Standards

AS 1445-2013 Hot-dipped zinc-coated, aluminium/zinc-coated or aluminium/zinc/magnesium-coated steel sheet — 76 mm pitch corrugated

Specifies requirements for 76 mm pitch corrugated steel sheet manufactured from hot-dipped zinc-coated, aluminium/zinc-coated or aluminium/zinc/magnesium-coated steel sheet in accordance with AS 1397.

Supersedes AS 1445-1986

AS 2359.2-2013 Powered industrial trucks – Operations

Specifies requirements, for the operation, maintenance, repair and modification of self-propelled industrial trucks and their attachments as defined in AS 2359.7 and gives guidance for the design of workplaces in which they are used.

Supersedes AS 2359.2-1985

AS 2359.6-2013 Powered industrial trucks - Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, MOD)

Adopts ISO 3691-1:2011 to specify safety requirements and the means for their verification for self-propelled industrial trucks, as defined in AS 2359.7.

Supersedes AS 2359.6-1995

AS 4747.1-2013 Meters for non-urban water supply - Glossary of terms

Sets out a glossary of terms for the AS 4747 series of Standards, Meters for non-urban water supply.

Supersedes ATS 4747.1-2008

AS 4747.2-2013 Meters for non-urban water supply - Technical requirements for closed conduit meters fully charged

Sets out requirements for water meters for use in non-urban applications. It primarily covers metering for irrigation water; however, it is intended that it be used for non-urban water applications other than applications covered by AS 3565.1.

Supersedes ATS 4747.2-2008

AS 4747.3-2013 Meters for non-urban water supply - Technical requirements for open channel meters

Proposes requirements for water meters for use in non-urban applications in open channel and part-filled pipe applications. It primarily applies to metering for irrigation water.

Supersedes ATS 4747.3-2008

AS 4747.5-2013 Meters for non-urban water supply - Installation and commissioning of closed conduit meters fully charged

Sets out requirements for the installations of meters complying with AS 4747.2 for use in non-urban closed conduits applications.

Supersedes ATS 4747.5-2008

AS 4747.6-2013 Meters for non-urban water supply - Installation and commissioning of open channel meters

Sets out requirements for water meters for use in non-urban applications in open channel and part-filled applications. It primarily applies to metering for irrigation water.

Supersedes ATS 4747.6-2008

AS 4747.8-2013 Meters for non-urban water supply - In-service compliance for non-urban water meters

Sets out requirements for water meters for use in non-urban applications in open channel and part-filled pipe applications. It primarily applies to metering for irrigation water.

Supersedes ATS 4747.8-2010

AS ISO 10545.6-2013 Ceramic tiles - Determination of resistance to deep abrasion for unglazed tiles

Adopts ISO 10545-6:2010, which specifies a test method for determining the resistance to deep abrasion of all unglazed ceramic tiles used for floor coverings.

Supersedes AS 4459.6-1999

AS ISO 10545.16-2013 Ceramic tiles - Determination of small colour differences

Adopts ISO 10545-16:2010, which specifies a method for utilizing colour measuring instruments for quantifying the small colour differences between plain coloured ceramic tiles, which are designed to be of uniform and consistent colour.

Supersedes AS 4459.16-2005

AS ISO 13006-2013 Ceramic tiles - Definitions, classification, characteristics and marking

Adopts ISO 13006:2012, which specifies terms and establishes classifications, characteristics and marking requirements for ceramic tiles of the best commercial quality (first quality).

Supersedes AS 4662-2003

AS ISO 13007.1-2013 Ceramic tiles - Grouts and adhesives - Terms, definitions and specifications for adhesives

Adopts ISO 13007-1:2010, which sets out terms concerning the products, working methods and application properties for ceramic tile adhesives.

Supersedes AS 4992.1-2006

AS ISO 13007.2-2013 Ceramic tiles - Grouts and adhesives - Test methods for adhesives

Adopts ISO 13007-2:2010, which specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles.

Supersedes AS 4992.2-2006

AS ISO 13007.3-2013 Ceramic tiles - Grouts and adhesives - Terms, definitions and specifications for grouts

Adopts ISO 13003-1:2010, which sets out terms concerning the products, working methods and application properties for ceramic tile grouts.

Supersedes AS 4992.3-2004

AS ISO 13007.4-2013 Ceramic tiles - Grouts and adhesives - Test methods for grouts

Adopts ISO 13007-4:2010, which specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles.

Supersedes AS 4992.4-2004

AS IEC 61800.5.2-2013 Adjustable speed electrical power drive systems - Safety requirements – Functional

Adopts IEC 61800-5-2, Ed.1.0 to specify requirements and make recommendations for the design and development, integration and validation of power drive systems that are suitable for use in safety-related applications {PDS(SR)} in terms of their functional safety considerations.

ATS 90006.1-2013 Core discharge summary - Structured document template

Specifies and defines the complete set of data elements proposed for use to support the creation of a valid and interoperable discharge summary instance, and structures the content in a manner that preserves context and meaning under which the contents are created. As such, provides an information framework within which to achieve semantic interoperability, independent of any messaging format, sending/receiving application or data store.

SA RUL CR.1-2013 Rulings to cranes, hoists and winches Standards - Ruling 1: Load testing (commissioning tests) of bridge, gantry, portal (including container cranes) and jib cranes

Ruling to AS 1418.3-1997

SA RUL RP.1-2013 Ruling to respiratory protective equipment Standards - Ruling 1: Protection factor for Class P3 filters

Ruling to AS/NZS 1715:2009

Superseded Standards

  • AS 1445-1986 Hot-dipped zinc-coated or aluminium/zinc-coated steel sheet - 76 mm pitch corrugated
    Superseded by AS 1445-2013
  • AS 2359.2-1985 Industrial trucks (known as the SAA Industrial Truck Code) – Operation
    Superseded by AS 2359.2-2013
  • AS 2359.6-1995 Powered industrial trucks - Safety code
    Superseded by AS 2359.6-2013
  • AS 4459.6-1999 Methods of sampling and testing ceramic tiles - Determination of resistance to deep abrasion for unglazed tiles
    Superseded by AS ISO 10545.6-2013
  • AS 4459.16-2005 Methods of sampling and testing ceramic tiles - Determination of small colour differences (ISO 10545-16:1999 MOD)
    Superseded by AS ISO 10545.16-2013
  • AS 4662-2003 Ceramic tiles - Definitions, classification, characteristics and marking
    Superseded by AS ISO 13006-2013
  • AS 4992.1-2006 Ceramic tiles - Grouts and adhesives - Terms, definitions and specifications for adhesives
    Superseded by AS ISO 13007.1-2013
  • AS 4992.2-2006 Ceramic tiles - Grouts and adhesives - Test methods for adhesives (ISO 13007-2:2005, MOD)
    Superseded by AS ISO 13007.2-2013
  • AS 4992.3-2004 Ceramic tiles: Products for installation - Grouts: Definitions and specifications
    Superseded by AS ISO 13007.3-2013
  • AS 4992.4-2004 Ceramic tiles: Products for installation - Grouts: Test methods
    Superseded by AS ISO 13007.4-2013
  • ATS 4747.1-2008 Meters for non-urban water supply - Glossary of terms
    Superseded by AS 4747.1-2013
  • ATS 4747.2-2008 Meters for non-urban water supply - Specification for closed conduit meters fully charged
    Superseded by AS 4747.2-2013
  • ATS 4747.3-2008 Meters for non-urban water supply - Specifications for open channel meters
    Superseded by AS 4747.3-2013
  • ATS 4747.5-2008 Meters for non-urban water supply - Installation and commissioning of closed conduit meters fully charged
    Superseded by AS 4747.5-2013
  • ATS 4747.6-2008 Meters for non-urban water supply - Installation and commissioning of open channel meters
    Superseded by AS 4747.6-2013
  • ATS 4747.8-2010 Meters for non-urban water supply - In-service compliance for non-urban water meters
    Superseded by AS 4747.8-2013

 

Published in international.