ASTM Standards

Issue 47 – March 2013

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A738/A738M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service has been revised to A738/A738M-12a developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process has been revised to A1039/A1039M-13 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1081/A1081M Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand is a new standard, now available. A1081/A1081M-12 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • B2 Standard Specification for Medium-Hard-Drawn Copper Wire has been editorially changed, available as B2-12e1 developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B39 Standard Specification for Nickel has been reapproved, available as B39-79(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B150/B150M Standard Specification for Aluminum Bronze Rod, Bar, and Shapes has been revised to B150/B150M-12 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip has been reapproved, available as B333-03(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B335 Standard Specification for Nickel-Molybdenum Alloy Rod has been reapproved, available as B335-03(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire has been revised to B365-12 developed by Committee B10.03, ASTM BOS Volume 02.04.
  • B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes has been revised to B521-12 developed by Committee B10.03, ASTM BOS Volume 02.04.
  • B536 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip has been reapproved, available as B536-07(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod has been reapproved (with editorial change), available as B581-02(2013)e1 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip has been reapproved, available as B582-07(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B620 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip has been reapproved, available as B620-03(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS?R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service has been reapproved, available as B639-02(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service has been reapproved, available as B670-07(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire has been reapproved, available as B672-02(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B675 Standard Specification for UNS N08367 Welded Pipe has been reapproved, available as B675-02(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube has been reapproved, available as B690-02(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire has been reapproved, available as B691-02(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip has been revised to B708-12 developed by Committee B10.03, ASTM BOS Volume 02.04.
  • B730 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube has been reapproved, available as B730-08(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B739 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube has been reapproved, available as B739-03(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube has been reapproved, available as B751-08(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe has been reapproved, available as B804-02(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B818 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip has been reapproved, available as B818-03(2013) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminium Conductors, Coated-Steel Supported (ACSS/TW) has been editorially changed, available as B857-11e1 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B902 Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction has been revised to B902-13 developed by Committee B01.04, ASTM BOS Volume 02.03.
  • C33/C33M Standard Specification for Concrete Aggregates has been revised to C33/C33M-13 developed by Committee C09.20, ASTM BOS Volume 04.02.
  • C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete has been revised to C42/C42M-13 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C70 Standard Test Method for Surface Moisture in Fine Aggregate has been revised to C70-13 developed by Committee C09.20, ASTM BOS Volume 04.02.
  • C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe has been revised to C76-13 developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C76M-13 developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) has been editorially changed, available as C78/C78M-10e1 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C301 Standard Test Methods for Vitrified Clay Pipe has been revised to C301-13 developed by Committee C04.20, ASTM BOS Volume 04.05.
  • C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe has been revised to C506-13 developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C506M-13 developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe has been revised to C507-13 developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C507M-13 developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C563 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength has been revised to C563-13 developed by Committee C01.28, ASTM BOS Volume 04.01.
  • C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying has been revised to C566-13 developed by Committee C09.20, ASTM BOS Volume 04.02.
  • C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete has been revised to C642-13 developed by Committee C09.66, ASTM BOS Volume 04.02.
  • C700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated has been revised to C700-13 developed by Committee C04.20, ASTM BOS Volume 04.05.
  • C805/C805M Standard Test Method for Rebound Number of Hardened Concrete has been revised to C805/C805M-13 developed by Committee C09.64, ASTM BOS Volume 04.02.
  • C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar has been revised to C806-12 developed by Committee C01.13, ASTM BOS Volume 04.01.
  • C822 Standard Terminology Relating to Concrete Pipe and Related Products has been revised to C822-13 developed by Committee C13.10, ASTM BOS Volume 04.05.
  • C845/C845M Standard Specification for Expansive Hydraulic Cement has been revised (with designation change) to C845/C845M-12 developed by Committee C01.13, ASTM BOS Volume 04.01.
  • C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures has been revised to C890-13 developed by Committee C27.30, ASTM BOS Volume 04.05.
  • C1009 Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry has been revised (with title change) to C1009-13 developed by Committee C26.08, ASTM BOS Volume 12.01.
  • C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution has been revised to C1012/C1012M-13 developed by Committee C01.29, ASTM BOS Volume 04.01.
  • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation has been revised to C1077-13 developed by Committee C09.98, ASTM BOS Volume 04.02.
  • C1089 Standard Specification for Spun Cast Prestressed Concrete Poles has been revised to C1089-13 developed by Committee C27.20, ASTM BOS Volume 04.05.
  • C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation has been revised to C1126-12a developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion has been reapproved (with editorial change), available as C1134-90(2012)e1 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C1184 Standard Specification for Structural Silicone Sealants has been revised to C1184-13 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1193 Standard Guide for Use of Joint Sealants has been revised to C1193-13 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board has been revised to C1289-12a developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1396/C1396M Standard Specification for Gypsum Board has been revised to C1396/C1396M-13 developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) has been revised to C1417M-13 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations has been revised to C1479-13 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1479M Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric) has been revised to C1479M-13 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) has been revised to C1567-13 developed by Committee C09.26, ASTM BOS Volume 04.02.
  • C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes has been revised to C1585-13 developed by Committee C09.66, ASTM BOS Volume 04.02.
  • C1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure has been reapproved, available as C1618-05(2013) developed by Committee C13.09, ASTM BOS Volume 04.05.
  • C1618M Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric) has been reapproved, available as C1618M-05(2013) developed by Committee C13.09, ASTM BOS Volume 04.05.
  • C1636 Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride has been revised to C1636-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1647 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials has been revised to C1647-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1661 Standard Guide for Viewing Systems for Remotely Operated Facilities has been revised to C1661-13 developed by Committee C26.14, ASTM BOS Volume 12.01.
  • C1714/C1714M Standard Specification for Preblended Dry Mortar Mix for Unit Masonry has been revised to C1714/C1714M-13 developed by Committee C12.03, ASTM BOS Volume 04.05.
  • C1770 Standard Test Method for ???Determination of Loose and Tapped Bulk Density of Plutonium Oxide is a new standard, now available. C1770-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1771 Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction is a new standard, now available. C1771-13 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • D360 Standard Specification for Shellac Varnishes has been reinstated as D360-12 developed by Committee D01.33, ASTM BOS Volume 06.03.
  • D4647D4647M Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test has been revised (with designation change) to D4647/D4647M-13 developed by Committee D18.06, ASTM BOS Volume 04.08.
  • D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable has been revised to D470-13 developed by Committee D09.18, ASTM BOS Volume 10.01.
  • D750 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus has been revised (with title change) to D750-12 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D832 Standard Practice for Rubber Conditioning For Low Temperature Testing has been reapproved, available as D832-07(2012) developed by Committee D11.14, ASTM BOS Volume 09.01.
  • D841 Standard Specification for Nitration Grade Toluene has been revised to D841-13 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D938 Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum has been revised to D938-12 developed by Committee D02.10.0A, ASTM BOS Volume 05.01.
  • D945 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph) has been reapproved, available as D945-06(2012) developed by Committee D11.14, ASTM BOS Volume 09.01.
  • D971 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method has been revised to D971-12 developed by Committee D27.07, ASTM BOS Volume 10.03.
  • D1053 Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics has been reapproved, available as D1053-92a(2012) developed by Committee D11.14, ASTM BOS Volume 09.01.
  • D1092 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases has been revised to D1092-12 developed by Committee D02.G0.02, ASTM BOS Volume 05.01.
  • D1141 Standard Practice for the Preparation of Substitute Ocean Water has been reapproved, available as D1141-98(2013) developed by Committee D19.02, ASTM BOS Volume 11.02.
  • D1148 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces has been revised (with title change) to D1148-13 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method) has been revised to D1267-12 developed by Committee D02.H0, ASTM BOS Volume 05.01.
  • D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel has been editorially changed, available as D1322-12e1 developed by Committee D02.J0.03, ASTM BOS Volume 05.01.
  • D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products has been revised to D1353-13 developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1545 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method has been revised to D1545-13 developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D1941 Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume has been reapproved, available as D1941-91(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D2136 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test has been reapproved, available as D2136-02(2012) developed by Committee D11.14, ASTM BOS Volume 09.01.
  • D2225 Standard Test Methods for Silicone Fluids Used for Electrical Insulation has been reapproved, available as D2225-04(2012) developed by Committee D27.02, ASTM BOS Volume 10.03.
  • D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) has been revised to D2261-13 developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D2331 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits has been reapproved, available as D2331-08(2013) developed by Committee D19.03, ASTM BOS Volume 11.02.
  • D2420 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) has been revised to D2420-12a developed by Committee D02.H0, ASTM BOS Volume 05.01.
  • D2460 Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water has been reapproved, available as D2460-07(2013) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 has been revised to D2467-13 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • D2477 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies has been reapproved, available as D2477-07(2012) developed by Committee D27.05, ASTM BOS Volume 10.03.
  • D2598 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis has been revised to D2598-12 developed by Committee D02.H0, ASTM BOS Volume 05.01.
  • D2825 Standard Terminology Relating to Polishes and Related Materials has been revised to D2825-13 developed by Committee D21.91, ASTM BOS Volume 15.04.
  • D2827 Standard Specification for Styrene Monomer has been revised to D2827-13 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D2881 Standard Classification for Metalworking Fluids and Related Materials has been revised to D2881-12 developed by Committee D02.L0.04, ASTM BOS Volume 05.01.
  • D2902 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation has been editorially changed, available as D2902-00(2013)e1 developed by Committee D09.07, ASTM BOS Volume 10.02.
  • D3144 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation has been editorially changed, available as D3144-00(2013)e1 developed by Committee D09.07, ASTM BOS Volume 10.02.
  • D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals has been reapproved, available as D3212-07(2013) developed by Committee F17.20, ASTM BOS Volume 08.04.
  • D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels has been revised to D3241-12 developed by Committee D02.J0.03, ASTM BOS Volume 05.01.
  • D3265 Standard Test Method for Carbon Black—Tint Strength has been revised to D3265-13 developed by Committee D24.21, ASTM BOS Volume 09.01.
  • D3279 Standard Test Method for n-Heptane Insolubles has been revised to D3279-12 developed by Committee D04.47, ASTM BOS Volume 04.03.
  • D3283 Standard Specification for Air as an Electrical Insulating Material has been reapproved, available as D3283-98(2012) developed by Committee D27.02, ASTM BOS Volume 10.03.
  • D3348 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) has been revised to D3348-12 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction has been revised to D3381/D3381M-12 developed by Committee D04.40, ASTM BOS Volume 04.03.
  • D3427 Standard Test Method for Air Release Properties of Petroleum Oils has been revised to D3427-12 developed by Committee D02.C0.02, ASTM BOS Volume 05.01.
  • D3700 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder has been revised to D3700-12 developed by Committee D02.H0, ASTM BOS Volume 05.01.
  • D3826 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test has been reapproved, available as D3826-98(2013) developed by Committee D20.96, ASTM BOS Volume 08.02.
  • D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester has been revised to D3828-12a developed by Committee D02.08, ASTM BOS Volume 05.02.
  • D3847 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures has been reapproved, available as D3847-01(2012) developed by Committee D11.14, ASTM BOS Volume 09.01.
  • D3944 Standard Test Method for Solidification Point of Petroleum Wax has been revised to D3944-12 developed by Committee D02.10.0A, ASTM BOS Volume 05.02.
  • D3977 Standard Test Methods for Determining Sediment Concentration in Water Samples has been reapproved, available as D3977-97(2013) developed by Committee D19.07, ASTM BOS Volume 11.02.
  • D4028/D4028M Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn has been revised (with designation change) to D4028/D4028M-13 developed by Committee D13.18, ASTM BOS Volume 07.01.
  • D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination has been revised to D4306-12c developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
  • D4698 Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals has been reapproved, available as D4698-92(2013) developed by Committee D19.07, ASTM BOS Volume 11.02.
  • D4716 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head has been reapproved, available as D4716-08(2013) developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer has been revised to D4741-12 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel has been revised to D4806-12 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-12 developed by Committee D02.A0.01, ASTM BOS Volume 05.02.
  • D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents has been reapproved, available as D4841-88(2013) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D4845 Standard Terminology Relating to Wool has been editorially changed, available as D4845-10e1 developed by Committee D13.13, ASTM BOS Volume 07.02.
  • D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards has been revised to D4857-12 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
  • D4966 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) has been editorially changed, available as D4966-12e1 developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D5073 Standard Practice for Depth Measurement of Surface Water has been reapproved, available as D5073-02(2013) developed by Committee D19.07, ASTM BOS Volume 11.02.
  • D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique has been revised to D5133-12 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D5174 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry has been reapproved, available as D5174-07(2013) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D5230 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness has been revised to D5230-13 developed by Committee D24.51, ASTM BOS Volume 09.01.
  • D5240/D5240M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate has been reapproved, available as D5240/D5240M-12(2013) developed by Committee D18.17, ASTM BOS Volume 04.08.
  • D5242 Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs has been reapproved, available as D5242-92(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D5243 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts has been reapproved, available as D5243-92(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D5258 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating has been reapproved, available as D5258-02(2013) developed by Committee D19.07, ASTM BOS Volume 11.02.
  • D5305 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor has been revised to D5305-12 developed by Committee D02.H0, ASTM BOS Volume 05.02.
  • D5312/D5312M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions has been reapproved, available as D5312/D5312M-12(2013) developed by Committee D18.17, ASTM BOS Volume 04.08.
  • D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method has been revised to D5379/D5379M-12 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D5387 Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments has been reapproved, available as D5387-93(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D5388 Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method has been reapproved, available as D5388-93(2013) developed by Committee D19.07, ASTM BOS Volume 11.01
  • D5389 Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems has been reapproved, available as D5389-93(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D5390 Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes has been reapproved, available as D5390-93(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D5413 Standard Test Methods for Measurement of Water Levels in Open-Water Bodies has been reapproved, available as D5413-93(2013) developed by Committee D19.07, ASTM BOS Volume 11.02.
  • D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence has been revised to D5453-12 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5478 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer has been revised to D5478-13 developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities has been revised to D5498-12a developed by Committee D33.04, ASTM BOS Volume 06.02.
  • D5539 Standard Specification for Seed Starter Mix has been reapproved, available as D5539-94(2013) developed by Committee D18.22, ASTM BOS Volume 04.08.
  • D5612 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program has been reapproved, available as D5612-94(2013) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D5646 Standard Terminology Relating to Seams and Stitches Used in Home Sewing has been revised to D5646-13 developed by Committee D13.54, ASTM BOS Volume 07.02.
  • D5681 Standard Terminology for Waste and Waste Management has been revised to D5681-13 developed by Committee D34.94, ASTM BOS Volume 11.04.
  • D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles has been revised to D5704-12a developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry has been revised to D5708-12 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines has been revised to D5798-12 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D5822 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions has been revised to D5822-13 developed by Committee D13.20, ASTM BOS Volume 07.02.
  • D5867 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments has been editorially changed, available as D5867-12e1 developed by Committee D13.11, ASTM BOS Volume 07.02.
  • D5900 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM) has been revised to D5900-13 developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D5905 Standard Practice for the Preparation of Substitute Wastewater has been reapproved, available as D5905-98(2013) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D5906 Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths has been reapproved, available as D5906-02(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D6027 Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes (Withdrawn 2004) has been withdrawn, with no replacement. D6027-96(2004) developed by Committee D18.95, ASTM BOS Volume 04.09.
  • D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method has been revised to D6045-12 developed by Committee D02.05, ASTM BOS Volume 05.02.
  • D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids has been revised to D6080-12a developed by Committee D02.N0.10, ASTM BOS Volume 05.02.
  • D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles has been revised to D6121-12a developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D6204 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers has been revised to D6204-12 developed by Committee D11.12, ASTM BOS Volume 09.01.
  • D6323 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities has been editorially changed, available as D6323-12e1 developed by Committee D34.01.01, ASTM BOS Volume 11.04.
  • D6355 Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves has been reapproved, available as D6355-07(2012) developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D6362 Standard Practice for Certificates of Reference Materials for Water Analysis has been reapproved, available as D6362-98(2013) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D6413/D6413M Standard Test Method for Flame Resistance of Textiles (Vertical Test) has been revised to D6413/D6413M-13 developed by Committee D13.52, ASTM BOS Volume 07.02.
  • D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems has been revised to D6469-12 developed by Committee D02.14, ASTM BOS Volume 05.03.
  • D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes has been revised to D6608-12 developed by Committee D04.47, ASTM BOS Volume 04.03.
  • D6644 Standard Test Method for Tension Strength of Sew-Through Flange Buttons has been reapproved, available as D6644-01(2013) developed by Committee D13.54, ASTM BOS Volume 07.02.
  • D6653/D6653M Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method has been revised to D6653/D6653M-13 developed by Committee D10.21, ASTM BOS Volume 15.10.
  • D6686 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings has been reapproved, available as D6686-01(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D6700 Standard Practice for Use of Scrap Tire-Derived Fuel has been reapproved, available as D6700-01(2013) developed by Committee D34.03, ASTM BOS Volume 11.04.
  • D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil has been reapproved, available as D6706-01(2013) developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D6736 Standard Test Method for Burnish Resistance of Latex Paints has been reapproved, available as D6736-08(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D6764 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels has been reapproved, available as D6764-02(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D6799 Standard Terminology Relating to Inflatable Restraints has been revised to D6799-13 developed by Committee D13.20, ASTM BOS Volume 07.02.
  • D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence has been revised to D6906-12a developed by Committee D01.53, ASTM BOS Volume 06.02.
  • D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine has been revised to D6984-12a developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
  • D7008 Standard Specification for Geosynthetic Alternate Daily Covers has been reapproved, available as D7008-08(2013) developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D7022 Standard Terminology Relating to Apparel (Withdrawn 2013) has been withdrawn, with no replacement. D7022- developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection has been editorially changed, available as D7041-04(2010)e1 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7108 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist has been revised to D7108-12 developed by Committee D33.04, ASTM BOS Volume 06.02.
  • D7119/D7119M Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing has been revised (with designation change) to D7119/D7119M-13 developed by Committee D08.06, ASTM BOS Volume 04.04.
  • D7139 Standard Terminology for Cotton Fibers has been editorially changed, available as D7139-09e2 developed by Committee D13.11, ASTM BOS Volume 07.02.
  • D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection) has been revised to D7157-12 developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7167 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant has been revised to D7167-12 developed by Committee D33.04, ASTM BOS Volume 06.02.
  • D7179 Standard Test Method for Determining Geonet Breaking Force has been reapproved, available as D7179-07(2013) developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D7197 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22) has been revised to D7197-13 developed by Committee D13.55, ASTM BOS Volume 07.02.
  • D7198 Standard Specification for Disposable Embalming Gloves for Single-Use Applications has been reapproved, available as D7198-05(2012) developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D7329 Standard Specification for Food Preparation and Food Handling (Food Service) Gloves has been reapproved, available as D7329-07(2012) developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D7353 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump has been reapproved, available as D7353-07(2013) developed by Committee D34.01.03, ASTM BOS Volume 11.04.
  • D7366 Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods has been reapproved, available as D7366-08(2013) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT) has been revised to D7501-12a developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons has been revised to D7566-12a developed by Committee D02.J0.06, ASTM BOS Volume 05.04.
  • D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration is a new standard, now available. D7795-12 developed by Committee D02.06, ASTM BOS Volume 05.04.
  • D7808 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material is a new standard, now available. D7808-12 developed by Committee D02.25, ASTM BOS Volume 05.04.
  • D7825 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer is a new standard, now available. D7825-12 developed by Committee D02.25, ASTM BOS Volume 05.04.
  • D7850 Standard Specification for Biological Properties of Industry Reference Materials (IRM) is a new standard, now available. D7850-13 developed by Committee D11.40, ASTM BOS Volume 09.02.
  • E18 Standard Test Methods for Rockwell Hardness of Metallic Materials has been revised to E18-12 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E96/E96M Standard Test Methods for Water Vapor Transmission of Materials has been revised to E96/E96M-12 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • E262 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques has been revised to E262-13 developed by Committee E10.05, ASTM BOS Volume 12.02.
  • E864 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels has been revised to E864-12 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E865 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels has been revised to E865-12 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E868 Standard Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems (Withdrawn 2005) has been withdrawn, with no replacement. E868-82(2005) developed by Committee D34.01.02, ASTM BOS Volume 11.04.
  • E958 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers has been revised to E958-13 developed by Committee E13.01, ASTM BOS Volume 03.06.
  • E975 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation has been revised to E975-13 developed by Committee E04.11, ASTM BOS Volume 03.01.
  • E1174 Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations has been revised to E1174-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E1265 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers has been reapproved, available as E1265-04(2013) developed by Committee E33.08, ASTM BOS Volume 04.06.
  • E1316 Standard Terminology for Nondestructive Examinations has been revised to E1316-13a developed by Committee E07.92, ASTM BOS Volume 03.03.
  • E1508 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy has been revised to E1508-12a developed by Committee E04.11, ASTM BOS Volume 03.01.
  • E1555 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair has been revised to E1555-12 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1556 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair has been revised to E1556-12 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1604 Standard Guide for Behavioral Testing in Aquatic Toxicology has been revised to E1604-12 developed by Committee E47.01, ASTM BOS Volume 11.06.
  • E1711 Standard Guide for Measurement of Behavior During Fish Toxicity Tests has been revised to E1711-12 developed by Committee E47.01, ASTM BOS Volume 11.06.
  • E1753 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films has been revised to E1753-13 developed by Committee E06.23, ASTM BOS Volume 04.11.
  • E1826 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded has been revised to E1826-12 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range has been revised to E1921-13 developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E2136 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability has been reapproved, available as E2136-04(2013) developed by Committee E06.25, ASTM BOS Volume 04.12.
  • E2156 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings has been reapproved, available as E2156-04(2013) developed by Committee E06.25, ASTM BOS Volume 04.12.
  • E2176 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain) (Withdrawn 2013) has been withdrawn and replaced by E2832-12 developed by Committee E12.10, ASTM BOS Volume 06.01.
  • E2267 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality has been reapproved, available as E2267-04(2013) developed by Committee E06.25, ASTM BOS Volume 04.12.
  • E2351 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality has been reapproved, available as E2351-04a(2013) developed by Committee E06.25, ASTM BOS Volume 04.12.
  • E2567 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis has been revised to E2567-13 developed by Committee E04.14, ASTM BOS Volume 03.01.
  • E2587 Standard Practice for Use of Control Charts in Statistical Process Control has been revised to E2587-12 developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2632/E2632M Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials is a new standard, now available. E2632/E2632M-13 developed by Committee E05.14, ASTM BOS Volume 04.07.
  • E2632/E2632M Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials has been editorially changed, available as E2632/E2632M-13e1 developed by Committee E05.14, ASTM BOS Volume 04.07.
  • E2681 Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum is a new standard, now available. E2681-13 developed by Committee E50.01, ASTM BOS Volume 11.05.
  • E2696 Standard Practice for Life and Reliability Testing Based on the Exponential Distribution has been editorially changed, available as E2696-09e1 developed by Committee E11.30, ASTM BOS Volume 14.02.
  • E2750 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM has been editorially changed, available as E2750-13e1 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2751 Standard Practice for Design and Performance of Supported Laminated Glass Walkways has been revised (with title change) to E2751-12 developed by Committee E06.56, ASTM BOS Volume 04.12.
  • E2852 Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation is a new standard, now available. E2852-13 developed by Committee E54.01, ASTM BOS Volume 15.08.
  • E2867 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry is a new standard, now available. E2867-13 developed by Committee E12.93, ASTM BOS Volume 06.01.
  • E2877 Standard Guide for Digital Contact Thermometers has been editorially changed, available as E2877-12e1 developed by Committee E20.09, ASTM BOS Volume 14.03.
  • E2910 Standard Guide for Preferred Methods for Acceptance of Product is a new standard, now available. E2910-12 developed by Committee E11.30, ASTM BOS Volume 14.02.
  • F412 Standard Terminology Relating to Plastic Piping Systems has been revised to F412-13 developed by Committee F17.91, ASTM BOS Volume 08.04.
  • F645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems has been revised to F645-13 developed by Committee F17.61, ASTM BOS Volume 08.04.
  • F660 Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters has been reapproved, available as F660-83(2013) developed by Committee D19.07, ASTM BOS Volume 11.01.
  • F1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing has been revised to F1055-13 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F1186 Standard Classification System for Chemicals According to Functional Groups has been reapproved, available as F1186-03(2013) developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F1359/F1359M Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin has been revised (with designation change) to F1359/F1359M-13 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F1646 Standard Terminology Relating to Safety and Traction for Footwear has been revised to F1646-13 developed by Committee F13.91, ASTM BOS Volume 15.07.
  • F1789 Standard Terminology for F16 Mechanical Fasteners has been revised to F1789-12a developed by Committee F16.94, ASTM BOS Volume 01.08.
  • F1891 Standard Specification for Arc and Flame Resistant Rainwear has been revised to F1891-12 developed by Committee F18.65, ASTM BOS Volume 10.03.
  • F1930 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin has been revised to F1930-13 developed by Committee F23.80, ASTM BOS Volume 11.03.
  • F1972 Standard Guide for Terminology Relating to Candles and Associated Accessory Items has been editorially changed, available as F1972-05e1 developed by Committee F15.45, ASTM BOS Volume 15.11.
  • F2088 Standard Consumer Safety Specification for Infant Swings has been revised to F2088-13 developed by Committee F15.21, ASTM BOS Volume 15.11
  • F2245 Standard Specification for Design and Performance of a Light Sport Airplane has been revised to F2245-12d developed by Committee F37.20, ASTM BOS Volume 15.11
  • F2510/F2510M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes has been reapproved, available as F2510/F2510M-07(2013) developed by Committee F17.20, ASTM BOS Volume 08.04
  • F2580 Standard Practice for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis has been revised (with title change) to F2580-13 developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F2624 Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs has been revised (with title change) to F2624-12 developed by Committee F04.25, ASTM BOS Volume 13.02.
  • F2658 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings has been reapproved, available as F2658-07(2013) developed by Committee F17.62, ASTM BOS Volume 08.04.
  • F2723 Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation has been revised to F2723-13 developed by Committee F04.22, ASTM BOS Volume 13.02.
  • F2901 Standard Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices has been revised to F2901-13 developed by Committee F04.16, ASTM BOS Volume 13.02.
  • F2962 Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides is a new standard, now available. F2962-13 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F2972 Standard Specification for Light Sport Aircraft Manufacturer's Quality Assurance System is a new standard, now available. F2972-12 developed by Committee F37.70, ASTM BOS Volume 15.11.
  • F2987 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications is a new standard, now available. F2987-12 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F2990 Standard Test Method for Commercial Coffee Brewers is a new standard, now available. F2990-12 developed by Committee F26.06, ASTM BOS Volume 15.12.
  • F2991 Standard Guide for Doubler Plate Repairs for Non-Classed Ship Structures is a new standard, now available. F2991-13 developed by Committee F25.01, ASTM BOS Volume 01.07.
  • G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements has been revised (with title change) to G5-13 developed by Committee G01.11, ASTM BOS Volume 03.02
  • G160 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial has been revised to G160-12 developed by Committee G03.04, ASTM BOS Volume 14.04.

 

Published in international.