ASTM STANDARDS

Issue 51 – July 2013

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling has been revised to A6/A6M-13 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A74 Standard Specification for Cast Iron Soil Pipe and Fittings has been revised to A74-13a developed by Committee A04.12, ASTM BOS Volume 01.02.
  • A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications has been revised to A240/A240M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications has been revised to A240/A240M-13a developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels has been revised to A262-13 developed by Committee A01.14, ASTM BOS Volume 01.03.
  • A276 Standard Specification for Stainless Steel Bars and Shapes has been revised to A276-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A288 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators has been reapproved, available as A288-91(2013) developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes has been revised to A312/A312M-13a developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A314 Standard Specification for Stainless Steel Billets and Bars for Forging has been revised to A314-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A322 Standard Specification for Steel Bars, Alloy, Standard Grades has been revised to A322-13 developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength has been editorially changed, available as A325-10e1 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts has been revised to A351/A351M-13a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings has been revised to A403/A403M-13 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels has been revised to A479/A479M-13a developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip has been revised to A480/A480M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings has been revised to A484/A484M-13a developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A531/A531M Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings has been revised to A531/A531M-13 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A574 Standard Specification for Alloy Steel Socket-Head Cap Screws has been revised to A574-13 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use has been revised to A668/A668M-13 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application has been revised to A743/A743M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A781/A781M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use has been revised to A795/A795M-13 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications has been revised to A888-13a developed by Committee A04.12, ASTM BOS Volume 01.02.
  • A902 Standard Terminology Relating to Metallic Coated Steel Products has been revised to A902-13a developed by Committee A05.18, ASTM BOS Volume 01.06.
  • A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars has been revised to A934/A934M-13 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys has been revised to A941-13b developed by Committee A01.92, ASTM BOS Volume 01.01.
  • A947M Standard Specification for Textured Stainless Steel Sheet [Metric] has been reinstated as A947M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts has been revised to A985/A985M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe has been revised to A999/A999M-13 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A1013 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method has been reapproved (with editorial change), available as A1013-00(2013)e1 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes has been revised to A1016/A1016M-13 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel has been revised to B212-13 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel has been revised to B213-13 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B299 Standard Specification for Titanium Sponge has been revised to B299-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity has been revised to B311-13 developed by Committee B09.11, ASTM BOS Volume 02.05.
  • B610 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders has been revised to B610-13 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel has been revised to B633-13 developed by Committee B08.06, ASTM BOS Volume 02.05.
  • B701/B701M Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD) has been revised to B701/B701M-13 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B962 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle has been revised to B962-13 developed by Committee B09.04, ASTM BOS Volume 02.05.
  • B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle has been revised to B963-13 developed by Committee B09.04, ASTM BOS Volume 02.05.
  • C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete has been revised to C138/C138M-13 developed by Committee C09.60, ASTM BOS Volume 04.02.
  • C728 Standard Specification for Perlite Thermal Insulation Board has been revised to C728-13 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C782 Standard Test Method for Softness of Preformed Tape Sealants has been revised to C782-13 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C933 Standard Specification for Welded Wire Lath has been revised to C933-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation has been revised to C1029-13 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation has been revised to C1077-13a developed by Committee C09.98, ASTM BOS Volume 04.02.
  • C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board has been editorially changed, available as C1289-13e1 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form has been revised to C1427-13 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1589/C1589M Standard Practice for Outdoor Weathering of Construction Seals and Sealants has been revised (with designation change) to C1589/C1589M-13 developed by Committee C24.40, ASTM BOS Volume 04.07.
  • C1656 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile has been revised to C1656-13 developed by Committee C08.09, ASTM BOS Volume 15.01.
  • C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems has been revised to C1668-13 developed by Committee C16.21, ASTM BOS Volume 04.06.
  • C1729 Standard Specification for Aluminum Jacketing for Insulation has been revised to C1729-13 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1767 Standard Specification for Stainless Steel Jacketing for Insulation has been revised to C1767-13 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • D123 Standard Terminology Relating to Textiles has been revised to D123-13 developed by Committee D13.92, ASTM BOS Volume 07.01.
  • D329 Standard Specification for Acetone has been reapproved, available as D329-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D330 Standard Specification for 2-Butoxyethanol has been reapproved, available as D330-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1122 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer has been revised to D1122-13 developed by Committee D15.03, ASTM BOS Volume 15.05.
  • D1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing has been revised to D1227-13 developed by Committee D08.09, ASTM BOS Volume 04.04.
  • D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption has been revised to D1319-13 developed by Committee D02.04.0C, ASTM BOS Volume 05.01.
  • D1655 Standard Specification for Aviation Turbine Fuels has been revised to D1655-13 developed by Committee D02.J0.01, ASTM BOS Volume 05.01.
  • D1836 Standard Specification for Commercial Hexanes has been reapproved, available as D1836-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2149 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C has been reinstated as D2149-13 developed by Committee D09.12, ASTM BOS Volume 10.01.
  • D2152 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion has been revised to D2152-13 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • D2190 Standard Specification for Vinyl Acetate has been reapproved, available as D2190-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2248 Standard Practice for Detergent Resistance of Organic Finishes has been reapproved, available as D2248-01a(2013) developed by Committee D01.27, ASTM BOS Volume 06.01.
  • D2303 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials has been reinstated as D2303-13 developed by Committee D09.12, ASTM BOS Volume 10.01.
  • D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service has been reapproved, available as D2485-91(2013) developed by Committee D01.27, ASTM BOS Volume 06.01.
  • D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings has been revised to D2513-13 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • D2634 Standard Specification for Methyl Amyl Acetate (95% Grade) has been reapproved, available as D2634-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2643/D2643M Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type) has been revised (with designation change) to D2643/D2643M-08(2013)e1 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography has been revised to D2887-13 developed by Committee D02.04.0H, ASTM BOS Volume 05.01.
  • D2917 Standard Specification for Methyl Isoamyl Ketone has been reapproved, available as D2917-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D3128 Standard Specification for 2-Methoxyethanol has been reapproved, available as D3128-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D3131 Standard Specification for Isopropyl Acetate (99% Grade) has been reapproved, available as D3131-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D3321 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants has been revised to D3321-13 developed by Committee D15.03, ASTM BOS Volume 15.05.
  • D3340 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (Withdrawn 2013) has been withdrawn, with no replacement. D3340-07 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D3636 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials has been revised to D3636-13a developed by Committee D09.94, ASTM BOS Volume 10.02.
  • D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography has been revised to D3760-13 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D3764 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems has been revised to D3764-13 developed by Committee D02.25, ASTM BOS Volume 05.02.
  • D3953 Standard Specification for Strapping, Flat Steel and Seals has been revised to D3953-13 developed by Committee D10.25, ASTM BOS Volume 15.10.
  • D4129 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection has been reapproved, available as D4129-05(2013) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D4140 Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents has been reapproved, available as D4140-07(2013) developed by Committee D01.21, ASTM BOS Volume 06.01.
  • D4206 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus has been reapproved, available as D4206-96(2013) developed by Committee D01.21, ASTM BOS Volume 06.01.
  • D4209 Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes has been reapproved, available as D4209-07(2013) developed by Committee D01.21, ASTM BOS Volume 06.01.
  • D4437 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes has been reapproved, available as D4437-08(2013) developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (?–Methylstyrene) by Spectrophotometry has been revised to D4590-13 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D4610 Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings has been reapproved, available as D4610-98(2013) developed by Committee D01.28, ASTM BOS Volume 06.01.
  • D4632/D4632M Standard Test Method for Grab Breaking Load and Elongation of Geotextiles has been revised (with designation change) to D4632/D4632M-08(2013)e1 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D4730 Standard Specification for Flooding Compounds for Telecommunications Wire and Cable has been revised to D4730-13 developed by Committee D09.18, ASTM BOS Volume 10.02.
  • D4732 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable has been revised to D4732-13 developed by Committee D09.18, ASTM BOS Volume 10.02.
  • D4792 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions has been revised (with designation change) to D4292/D4292M-13 developed by Committee D04.51, ASTM BOS Volume 04.03.
  • D4833/D4833M Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products has been revised (with designation change) to D4833/D4833M-07(2013)e1 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces has been revised to D5065-13 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D5137 Standard Specification for Hexyl Acetate has been reapproved, available as D5137-07(2013) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D5400 Standard Test Methods for Hydroxypropylcellulose has been reapproved, available as D5400-03(2013) developed by Committee D01.36, ASTM BOS Volume 06.03.
  • D5718 Standard Guide for Documenting a Groundwater Flow Model Application has been revised to D5718-13 developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids has been reapproved (with editorial change), available as D5747/D5747M-08(2013)e1 developed by Committee D35.02, ASTM BOS Volume 04.13.
  • D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines has been revised to D5798-13 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders has been revised to D5895-13 developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D5897 Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method has been revised to D5897-13 developed by Committee D01.36, ASTM BOS Volume 06.03.
  • D5931 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter has been revised to D5931-13 developed by Committee D15.03, ASTM BOS Volume 15.05.
  • D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates has been revised to D5961/D5961M-13 developed by Committee D30.05, ASTM BOS Volume 15.03.
  • D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems has been revised to D6122-13 developed by Committee D02.25, ASTM BOS Volume 05.02.
  • D6143 Standard Test Method for Iron Content of Bisphenol A (4,4? - Isopropylidenediphenol) has been revised to D6143-13 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D6144 Standard Test Method for Analysis of AMS (?-Methylstyrene) by Capillary Gas Chromatography has been revised to D6144-13 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D6214/D6214M Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods has been reapproved (with editorial change), available as D6214/D6214M-98(2013)e1 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing has been revised to D6294/D6294M-13 developed by Committee D08.20, ASTM BOS Volume 04.04.
  • D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface has been revised to D6298-13 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D6413/D6413M Standard Test Method for Flame Resistance of Textiles (Vertical Test) has been revised to D6413/D6413M-13b developed by Committee D13.52, ASTM BOS Volume 07.02.
  • D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material has been revised to D6708-13 developed by Committee D02.94, ASTM BOS Volume 05.03.
  • D6715 Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests has been revised (with title change) to D6715-13 developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D6747 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes has been revised (with title change) to D6747-12 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4% Fuel Sulfur) and 1N Procedure (0.04% Fuel Sulfur) has been revised to D6750-13 developed by Committee D02.B0.02, ASTM BOS Volume 05.03.
  • D7003/D7003M Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes has been reapproved (with editorial change), available as D7003/D7003M-03(2013)e1 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D7004/D7004M Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes has been reapproved (with editorial change), available as D7004/D7004M-03(2013)e1 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) has been revised to D7057-13 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D7168 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk has been editorially changed, available as D7168-11e1 developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D7273/D7273M Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites has been reapproved (with editorial change), available as D7273/D7273M-08(2013)e1 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D7334 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement has been reapproved, available as D7334-08(2013) developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D7358 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit has been reapproved, available as D7358-07(2013) developed by Committee D01.21, ASTM BOS Volume 06.01.
  • D7419 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection has been revised to D7419-13 developed by Committee D02.04.0C, ASTM BOS Volume 05.04.
  • D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine has been revised to D7422-13 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7528 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus has been revised to D7528-13 developed by Committee D02.B0.07, ASTM BOS Volume 05.04.
  • D7535 Standard Test Method for Lead-210 in Water has been editorially changed, available as D7535-09e1 developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D7540 Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller has been reapproved, available as D7540-09(2013) developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure has been revised to D7549-13 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons has been revised to D7566-13 developed by Committee D02.J0.06, ASTM BOS Volume 05.04.
  • D7597 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chro has been editorially changed, available as D7597-09e2 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7598 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry has been editorially changed, available as D7598-09e2 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7600 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry has been editorially changed, available as D7600-09e3 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7611/D7611M Standard Practice for Coding Plastic Manufactured Articles for Resin Identification has been revised to D7611/D7611M-13 developed by Committee D20.95, ASTM BOS Volume 08.03.
  • D7650 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter has been revised to D7650-13 developed by Committee D03.14, ASTM BOS Volume 05.06.
  • D7702/D7702M Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics has been revised (with designation change) to D7702/D7702M-13a developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D7805 Standard Terminology for Printing Ink Vehicles and Related Materials is a new standard, now available. D7805-13 developed by Committee D01.37, ASTM BOS Volume 06.03.
  • E84 Standard Test Method for Surface Burning Characteristics of Building Materials has been revised to E84-13 developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E125 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings has been reapproved, available as E125-63(2013) developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source has been revised to E162-13 developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E427 Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) (Withdrawn 2013) has been withdrawn, with no replacement. E427- developed by Committee E07.08, ASTM BOS Volume 03.03.
  • E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing has been reapproved, available as E428-08(2013) developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E433 Standard Reference Photographs for Liquid Penetrant Inspection has been reapproved, available as E433-71(2013) developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E618 Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine has been reapproved, available as E618-07(2013) developed by Committee A01.15, ASTM BOS Volume 01.05.
  • E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials has been revised to E662-13b developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E803 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams has been reapproved, available as E803-91(2013) developed by Committee E07.05, ASTM BOS Volume 03.03.
  • E870 Standard Test Methods for Analysis of Wood Fuels has been reapproved, available as E870-82(2013) developed by Committee E48.05, ASTM BOS Volume 11.06.
  • E873 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels has been reapproved, available as E873-82(2013) developed by Committee E48.05, ASTM BOS Volume 11.06.
  • E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures has been revised to E1007-13 developed by Committee E33.03, ASTM BOS Volume 04.06.
  • E1358 Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven has been reapproved, available as E1358-97(2013) developed by Committee E48.05, ASTM BOS Volume 11.06.
  • E1454 Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data (Withdrawn 2013) has been withdrawn, with no replacement. E1454- developed by Committee E07.11, ASTM BOS Volume 03.03.
  • E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry has been revised to E1568-13 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1695 Standard Test Method for Measurement of Computed Tomography (CT) System Performance has been reapproved, available as E1695-95(2013) developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1781/E1781M Standard Practice for Secondary Calibration of Acoustic Emission Sensors has been revised (with designation change) to E1781/E1781M-13 developed by Committee E07.04, ASTM BOS Volume 03.03.
  • E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry has been revised (with title change) to E1805-13 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1815 Standard Test Method for Classification of Film Systems for Industrial Radiography has been reapproved (with editorial change), available as E1815-08(2013)e1 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1820 Standard Test Method for Measurement of Fracture Toughness has been editorially changed, available as E1820-11e2 developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry has been revised to E1898-13 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1935 Standard Test Method for Calibrating and Measuring CT Density has been reapproved, available as E1935-97(2013) developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1981 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry has been editorially changed, available as E1981-98(2012)e2 developed by Committee E27.02, ASTM BOS Volume 14.02.
  • E2033 Standard Practice for Computed Radiology (Photostimulable Luminescence Method) has been reapproved, available as E2033-99(2013) developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E2192 Standard Guide for Planar Flaw Height Sizing by Ultrasonics has been revised to E2192-13 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E2223 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics has been revised to E2223-13 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) has been reinstated as E2371-13 developed by Committee E01.06, ASTM BOS Volume 03.05.
  • E2375 Standard Practice for Ultrasonic Testing of Wrought Products has been reapproved, available as E2375-08(2013) developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E2491 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems has been revised to E2491-13 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E2751/E2751M Standard Practice for Design and Performance of Supported Laminated Glass Walkways has been revised (with designation change) to E2751/E2751M-13 developed by Committee E06.56, ASTM BOS Volume 04.12.
  • E2816 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems has been revised to E2816-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2884 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays is a new standard, now available. E2884-13 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E2885 Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications is a new standard, now available. E2885-13 developed by Committee E54.01, ASTM BOS Volume 15.08.
  • E2903 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes is a new standard, now available. E2903-13 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E2907/E2907M Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing is a new standard, now available. E2907/E2907M-13 developed by Committee E07.04, ASTM BOS Volume 03.03.
  • E2919 Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose is a new standard, now available. E2919-13 developed by Committee E57.02, ASTM BOS Volume 10.04.
  • E2929 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction is a new standard, now available. E2929-13 developed by Committee E07.10, ASTM BOS Volume 03.03.
  • E2930 Standard Practice for Pressure Decay Leak Test Method is a new standard, now available. E2930-13 developed by Committee E07.08, ASTM BOS Volume 03.03.
  • F318 Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids has been withdrawn and replaced by F25/F25M developed by Committee E21.05, ASTM BOS Volume 15.03.
  • F441/F441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 has been revised to F441/F441M-13 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • F442/F442M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) has been revised to F442/F442M-13 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • F450 Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic) has been revised to F450-13 developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F558 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners has been revised to F558-13 developed by Committee F11.22, ASTM BOS Volume 15.08.
  • F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs has been revised to F593-13 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F714 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter has been revised to F714-13 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F838 Standard Test Method for Determining Bacterial Retention of Membrane Filters Utilized for Liquid Filtration has been reapproved, available as F838-05(2013) developed by Committee E55.03, ASTM BOS Volume 14.02.
  • F869 Standard Terminology Relating to Athletic Shoes and Biomechanics (Withdrawn 2013) has been withdrawn, with no replacement. F869-01(2007) developed by Committee F08.54, ASTM BOS Volume 15.07.
  • F1446 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear has been revised to F1446-13 developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F1649 Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems has been reinstated as F1649-13 developed by Committee F09.20, ASTM BOS Volume 09.02.
  • F1671/F1671M Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System has been revised (with designation change) to F1671/F1671M-13 developed by Committee F23.40, ASTM BOS Volume 11.03.
  • F2124 Standard Practice for Testing Treestand Ladder, Tripod Stand and Climbing Stick Load Capacity has been revised to F2124-13 developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F2203 Standard Test Method for Linear Measurement Using Precision Steel Rule has been revised to F2203-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2217/F2217M Standard Practice for Coating/Adhesive Weight Determination has been revised (with designation change) to F2217/F2217M-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2245 Standard Specification for Design and Performance of a Light Sport Airplane has been revised to F2245-13a developed by Committee F37.20, ASTM BOS Volume 15.11.
  • F2250 Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials has been revised to F2250-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2252 Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape has been revised to F2252-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners has been revised to F2329-13 developed by Committee F16.03, ASTM BOS Volume 01.08.
  • F2471 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring has been revised to F2471-13 developed by Committee F06.40, ASTM BOS Volume 15.04.
  • F2506 Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers has been editorially changed, available as F2506-10e1 developed by Committee F37.70, ASTM BOS Volume 15.11.
  • F2564 Standard Specification for Design and Performance of a Light Sport Glider has been revised to F2564-13 developed by Committee F37.10, ASTM BOS Volume 15.11.
  • F2576 Standard Terminology Relating to Declarable Substances in Materials has been revised to F2576-13 developed by Committee F40.91, ASTM BOS Volume 10.04.
  • F2613 Standard Consumer Safety Specification for Children's Chairs and Stools has been revised (with title change) to F2613-13 developed by Committee F15.59, ASTM BOS Volume 15.11.
  • F2970 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts is a new standard, now available. F2970-13 developed by Committee F24.60, ASTM BOS Volume 15.07.
  • F2982 Standard Specification for Polyester Composition Floor Tile has been revised to F2982-13 developed by Committee F06.80, ASTM BOS Volume 15.04.
  • G40 Standard Terminology Relating to Wear and Erosion has been revised to G40-13 developed by Committee G02.91, ASTM BOS Volume 03.02.
  • G70 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) (Withdrawn 2013) has been withdrawn, with no replacement. G70- developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G169 Standard Guide for Application of Basic Statistical Methods to Weathering Tests has been reapproved, available as G169-01(2013) developed by Committee G03.93, ASTM BOS Volume 14.04.

Published in international.