British publications

Set out below are recent publications from the British Standards Institution (BSI), together with announcements of supersession and withdrawal. Hard copy and PDF formats of BSI standards are available for purchase from our website www.standards.co.nz by entering the standard number.

British standard

The publication listed below is a revised British standard that was made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British standards withdrawn’ section.

  • BS 7965:2013 Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications|
    Supersedes BS 7965:2009

BS EN standards

The following are British standard implementations of the English language versions of European standards (ENs). The date referenced in the identifier is the date of the European standard.  You can now purchase PDFs of British standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 301:2013 Adhesives, phenolic and aminoplastic, for loadbearing timber structures. Classification and performance requirements
    Supersedes BS EN 301:2006
  • BS EN 573-3:2013 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
    Supersedes BS EN 573-3:2009
  • BS EN 847-1:2013 Tools for woodworking. Safety requirements. Milling tools, circular saw blades
    Supersedes BS EN 847-1:2005
  • BS EN 847-2:2013 Tools for woodworking. Safety requirements. Requirements for the shank of shank mounted milling
    Supersedes BS EN 847-2:2001
  • BS EN 847-3:2013 Tools for woodworking. Safety requirements. Clamping devices
    Supersedes BS EN 847-3:2004
  • BS EN 1124-4:2013 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for wastewater systems. Components for vacuum drainage systems and for drainage systems on ships
    Supersedes BS EN 1124-4:2005
  • BS EN 1344:2013 Clay pavers. Requirements and test methods
    Supersedes BS EN 1344:2002
  • BS EN 1870-11:2013 Safety of woodworking machines. Circular sawing machines. Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)
    Supersedes BS EN 1870-11:2003+A1:2009
  • BS EN 1870-12:2013 Safety of woodworking machines. Circular sawing machines. Pendulum cross-cut sawing machines
    Supersedes BS EN 1870-12:2003+A1:2009
  • BS EN ISO 3691-6:2013 Industrial trucks. Safety requirements and verification. Burden and personnel carriers
    Supersedes BS EN 1726-1:1999
  • BS EN ISO 4833-1:2013 Microbiology of the food chain. Horizontal method for the enumeration of microorganisms. Colony count at 30 degrees C by the pour plate technique
    Together with BS EN ISO 4833-2:2013 it supersedes BS EN ISO 4833:2003, which is withdrawn
  • BS EN ISO 4833-2:2013 Microbiology of food and animal feed. Horizontal method for the enumeration of microorganisms. Colony count at 30 degrees C by the surface plating technique
    Together with BS EN ISO 4833-1:2013 it supersedes BS EN ISO 4833:2003, which is withdrawn
  • BS EN ISO 9606-1:2013 Qualification testing of welders. Fusion welding. Steels
    Supersedes BS EN 287-1:2011
  • BS EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
    Supersedes BS EN 10269:1999+A1:2006
  • BS EN ISO 10581:2013 Resilient floor coverings. Homogeneous poly (vinyl chloride) floor covering. Specifications
    Supersedes BS EN 649:2011
  • BS EN 12098-3:2013 Controls for heating systems. Control equipment for electrical heating systems
    Supersedes BS EN 12098-3:2002 and BS EN 12098-4:2005
  • BS EN 12390-13:2013 Testing hardened concrete. Determination of secant modulus of elasticity in compression
  • BS EN 12579:2013 Soil improvers and growing media. Sampling
    Supersedes BS EN 12579:2000
  • BS EN 12580:2013 Soil improvers and growing media. Determination of a quantity
    Supersedes BS EN 12580:2000
  • BS EN 13136:2013 Refrigerating systems and heat pumps. Pressure relief devices and their associated piping. Methods for calculation
    Supersedes BS EN 13136:2001
  • BS EN ISO 13137:2013 Workplace atmospheres. Pumps for personal sampling of chemical and biological agents. Requirements and test methods
    Supersedes BS EN 1232:1997 and BS EN 12919:1999
  • BS EN 13278:2013 Open fronted gas-fired independent space heaters
    Supersedes BS EN 13278:2003
  • BS EN 13402-3:2013 Size designation of clothes. Body measurements and intervals
    Supersedes BS EN 13402-3:2004
  • BS EN 13482:2013 Rubber hoses and hose assemblies for asphalt and bitumen. Specification
    Supersedes BS EN 13482:2001
  • BS EN 13496:2013 Thermal insulation products for building applications. Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
    Supersedes BS EN 13496:2002
  • BS EN 13852-1:2013 Cranes. Offshore cranes. General-purpose offshore cranes
    Supersedes BS EN 13852-1:2004
  • BS EN 15877-2:2013 Railway applications. Markings of railway vehicles. External markings on coaches, motive power units, locomotives and on track machines
  • BS EN 16235:2013 Railway application. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363
  • BS EN 16254:2013 Adhesives. Emulsion polymerized isocyanate (EPI) for load-bearing timber structures. Classification and performance requirements
  • BS EN 16318:2013 Fertilizers. Determination of trace elements. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
    Supersedes PD CEN/TS 16318:2012
  • BS EN 16319:2013 Fertilizers. Determination of trace elements. Determination of cadmium, chromium, lead and nickel by inductively coupled plasmaatomic emission spectrometry (ICP-AES) after aqua regia dissolution
    Supersedes PD CEN/TS 16319:2012
  • BS EN 16401:2013 Chemicals used for treatment of swimming pool water. Sodium chloride used for electrochlorinator systems
  • BS EN 16423:2013 Liquefied petroleum gases. Determination of dissolved residue. Gas chromatographic method using liquid, on-column injection
  • BS EN ISO 18265:2013 Metallic materials. Conversion of hardness values
    Supersedes BS EN ISO 18265:2003
  • BS EN ISO 25178-603:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments
  • BS EN ISO 28258:2013 Soil quality. Digital exchange of soil-related data
  • BS EN 50136-2:2013 Alarm systems. Alarm transmission systems and equipment. Requirements for Supervised Premises Transceiver (SPT)
    Supersedes BS EN 50136-2-1:1998, BS EN 50136-2-2:1998, BS EN 50136-2-3:1998 and BS EN 50136-2-4:1998 which are withdrawn
  • BS EN 50174-3:2013 Information technology. Cabling installation. Installation planning and practices outside buildings
    Supersedes BS EN 50174-3:2003
  • BS EN 50292:2013 Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats. Guide on the selection, installation, use and maintenance
    Supersedes BS EN 50292:2002
  • BS EN 50332-1:2013 Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology. General method for “one package equipment”
    Supersedes BS EN 50332-1:2000 which remains current
  • BS EN 50332-2:2013 Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology. Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
    Supersedes BS EN 50332-2:2003 which remains current
  • BS EN 50332-1:2013 Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology. General method for “one package equipment”
    Supersedes BS EN 50332-1:2000 which remains current 
  • BS EN 50332-2:2013 Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology. Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
    Supersedes BS EN 50332-2:2003 which remains current 
  • BS EN 50551-2:2013 Simplex and duplex cables to be used for cords. Detailed specification and minimum requirements for a 3,0 mm simplex ruggedized single mode fibre cable to be used for patchcords/cords category U 
  • BS EN 50561-1:2013 Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurement. Apparatus for in-home use 
  • BS EN 60204-31:2013 Safety of machinery. Electrical equipment of machines. Particular safety and EMC requirements for sewing machines, units and systems
    Supersedes BS EN 60204-31:1998 
  • BS EN 60255-149:2013 Measuring relays and protection equipment. Functional requirements for thermal electrical relays
    Supersedes BS EN 60255-8:1998 
  • BS EN 60444-6:2013 Measurement of quartz crystal unit parameters. Measurement of drive level dependence (DLD)
    Supersedes BS EN 60444-6:1997 
  • BS EN 60743:2013 Live working. Terminology for tools, devices and equipment
    Supersedes BS EN 60743:2001+A1:2008 which remains current 
  • BS EN 60947-7-4:2013 Low-voltage switchgear and controlgear. Ancillary equipment. PCB terminal blocks for copper conductors 
  • BS EN 61191-2:2013 Printed board assemblies. Sectional specification. Requirements for surface mount soldered assemblies
    Supersedes BS EN 61191-2:1999 
  • BS EN 61514-2:2013 Industrial process control systems. Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
    Supersedes BS EN 61514-2:2004 which remains current 
  • BS EN 61558-2-26:2013 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for saving energy and other purposes 
  • BS EN 61747-10-1:2013 Liquid crystal display devices. Environmental, endurance and mechanical test methods. Mechanical
    Partially supersedes BS EN 61747-5:1998 
  • BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to noncopper volume ratio of Nb3Sn composite superconducting wires
    Supersedes BS EN 61788-12:2002 
  • BS EN 61970-301:2013 Energy management system application program interface (EMS-API). Common information model (CIM) base
    Supersedes BS EN 61970-301:2011 
  • BS EN 62056-9-7:2013 Electricity metering data exchange. The DLMS/COSEM suite. Communication profile for TCP-UDP/IP networks
    Partially supersedes BS EN 62056-53:2007 
  • BS EN 62215-3:2013 Integrated circuits. Measurement of impulse immunity. Non-synchronous transient injection method 
  • BS EN 62264-2:2013 Enterprise-control system integration. Objects and attributes for enterprise-control system integration
    Supersedes BS EN 62264-2:2008 
  • BS EN 62271-112:2013 High-voltage switchgear and controlgear. Alternating current high-speed earthing switches for secondary arc extinction on transmission lines 
  • BS EN 62341-5-3:2013 Organic Light Emitting Diode (OLED) displays. Measuring methods of image sticking and lifetime 
  • BS EN 419211-3:2013 Protection profiles for secure signature creation device. Device with key import

 BS implementations

BS implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard. 

  • BS ISO 334:2013 Solid mineral fuels. Determination of total sulphur. Eschka method
    Supersedes BS 1016-106.4.1:1993 
  • BS ISO 1999:2013 Acoustics. Estimation of noise-induced hearing loss 
  • BS ISO 3776-2:2013 Tractors and machinery for agriculture. Seat belts. Anchorage strength requirements
    Supersedes BS ISO 3776-2:2007 
  • BS ISO 5636-3:2013 Paper and board. Determination of air permeance (medium range). Bendtsen method
    Supersedes BS 6538-2:1992 
  • BS ISO 5636-4:2013 Paper and board. Determination of air permeance (medium range). Sheffield method
    Supersedes BS ISO 5636-4:2005 
  • BS ISO 5636-5:2013 Paper and board. Determination of air permeance (medium range). Gurley method
    Supersedes BS ISO 5636-5:2003 
  • BS ISO 6550-3:2013 Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs
    Supersedes BS ISO 6550-3:2009 
  • BS ISO 6622-2:2013 Internal combustion engines. Piston rings. Rectangular rings made of steel
    Supersedes BS ISO 6622-2:2003 
  • BS ISO 7388-3:2013 Tool shanks with 7/24 taper for automatic tool changers. Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
    Supersedes BS ISO 7388-3:2007 
  • BS ISO 8038:2013 Microscopes. Screw threads for objectives and related nosepieces
    Supersedes BS ISO 8038:2011 
  • BS ISO 9841:2013 Essential oil of hyssop (Hyssopus officinalis L. ssp. officinalis)
    Supersedes BS ISO 9841:2007 
  • BS ISO 9912-2:2013 Agricultural irrigation equipment. Filters for microirrigation. Strainer-type filters and disc filters 
  • BS ISO 10649-2:2013 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with taper interface with flange contact surface
    Supersedes BS ISO 10649-2:2010 
  • BS ISO 10649-3:2013 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
    Supersedes BS ISO 10649-3:2010 
  • BS ISO 10649-4:2013 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
    Supersedes BS ISO 10649-4:2010 
  • BS ISO/IEC 11160-2:2013 Information technology. Office equipment. Minimum information to be included in specification sheets. Printers. Class 3 and Class 4 printers 
  • BS ISO 11898-6:2013 Road vehicles. Controller area network (CAN). High-speed medium access unit with selective wake-up functionality 
  • BS ISO 12821:2013 Glass packaging. 26 H 180 crown finish. Dimensions 
  • BS ISO 12934:2013 Tractors and machinery for agriculture and forestry. Basic types. Vocabulary 
  • BS ISO 13007-2:2013 Ceramic tiles. Grouts and adhesives. Test methods for adhesives
    Supersedes BS ISO 13007-2:2010 
  • BS ISO 13052:2013 Road vehicles. Trailers up to 3,5 t. Requirements for jockey wheels and drawbar supports 
  • BS ISO/IEC 13250-3:2013 Information technology. Topic Maps. XML syntax
    Supersedes BS ISO/IEC 13250-3:2007 
  • BS ISO 13495:2013 Foodstuffs. Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid 
  • BS ISO 14605:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Light source for testing semiconducting photocatalytic materials used under indoor lighting environment 
  • BS ISO 16239:2013 Metric series wires for measuring screw threads 
  • BS ISO 16290:2013 Space systems. Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment 
  • BS ISO 16404:2013 Space systems. Programme management. Requirements management 
  • BS ISO 16900-11:2013 Respiratory protective devices. Methods of test and test equipment. Determination of field of vision 
  • BS ISO 17049:2013 Accessible design. Application of braille on signage, equipment and appliances 
  • BS ISO 21483:2013 Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2 
  • BS ISO 22300:2012 Societal security. Terminology 
  • BS ISO 22398:2013 Societal security. Guidelines for exercises 
  • BS ISO 27048:2011 Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure 
  • BS ISO/IEC 29101:2013 Information technology. Security techniques. Privacy architecture framework 
  • BS ISO/IEC 30111:2013 Information technology. Security techniques. Vulnerability handling processes 

 Published documents 

  • PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Rules
    Together with BS EN ISO 8062-1:2007 and BS EN ISO 8062-3:2007 it supersedes BS 6615:1996 (ISO 8062:1994), which is withdrawn 
  • PD ISO/TR 12350:2013 Road vehicles. Injury risk curves for the evaluation of occupant protection in side impact tests
    Supersedes PD ISO/TR 12350:2004 
  • PD CEN ISO/TS 12747:2013 Petroleum and natural gas industries. Pipeline transportation systems. Recommended practice for pipeline life extension 
  • PD CEN/TS 13149-8:2013 Public transport. Road vehicle scheduling and control systems. Physical layer for IP communication 
  • PD ISO/TS 13399-301:2013 Cutting tool data representation and exchange. Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, threadforming taps and thread-cutting dies 
  • PD ISO/TS 13399-302:2013 Cutting tool data representation and exchange. Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools 
  • PD CEN/TR 16496:2013 Construction Products. Assessment of release of dangerous substances. Use of harmonised horizontal assessment methods 
  • PD CEN/TS 16516:2013 Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air 
  • PD ISO/TS 16965:2013 Soil quality. Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS) 
  • PD ISO/TS 16976-5:2013 Respiratory protective devices. Human factors. Thermal effects 
  • PD ISO/IEC TS 17021-4:2013 Conformity assessment. Requirements for bodies providing audit and certification of management systems. Competence requirements for auditing and certification of event sustainability management systems 
  • PD ISO/TS 17073:2013 Soil quality. Determination of trace elements in aqua regia and nitric acid digests. Graphite furnace atomic absorption spectrometry method (GFAAS) 
  • PD CEN ISO/TS 18234-1:2013 Intelligent transport systems. Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format. Introduction, numbering and versions (TPEG1-INV)
    Supersedes DD CEN ISO/TS 18234-1:2006 
  • PD CEN ISO/TS 18234-2:2013 Intelligent transport systems. Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format. Syntax, semantics and framing structure (TPEG1-SSF)
    Supersedes DD CEN ISO/TS 18234-2:2006 
  • PD CEN ISO/TS 18234-7:2013 Intelligent transport systems. Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format. Parking information (TPEG1-PKI) 
  • PD CEN ISO/TS 18234-9:2013 Intelligent transport systems. Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format. Traffic event compact (TPEG1-TEC) 
  • PD CEN ISO/TS 18234-10:2013 Intelligent transport systems. Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format. Conditional access information (TPEG1-CAI) 
  • PD ISO/IEC/TR 20000-10:2013 Information technology. Service management. Concepts and terminology 
  • PD ISO/IEC TR 20943-5:2013 Information technology. Procedures for achieving metadata registry content consistency. Metadata mapping procedure 
  • PD ISO/IEC TR 20943-6:2013 Information technology. Procedures for achieving metadata registry content consistency. Framework for generating ontologies 
  • PD ISO/IEC TR 29181-4:2013 Information technology. Future Network. Problem statement and requirements. Mobility 
  • PD ISO/TR 31004:2013 Risk management. Guidance for the implementation of ISO 31000 
  • PD CLC/TR 50608:2013 Smart grid projects in Europe 
  • PD IEC/TS 62257-1:2013 Recommendations for small renewable energy and hybrid systems for rural electrification. General introduction to IEC 62257 series and rural electrification 
  • PD IEC/TR 62627-03-04:2013 Fibre optic interconnecting devices and passive components. Reliability. Guideline for high power reliability of passive optical components 
  • PD IEC/TR 62627-05:2013 Fibre optic interconnecting devices and passive components. Investigation on impact of contamination and scratches on optical performance of single-mode (SM) and multimode (MM) connectors 
  • PD IEC/TS 62647-23:2013 Process management for avionics. Aerospace and defence electronic systems containing leadfree solder. Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies
    Supersedes DD IEC/PAS 62647-23:2011 
  • PD IEC/TR 62809:2013 Summary of requirements and tests for products in the scope of IEC 60601-2-66 
  • PD IEC/TR 62834:2013 IEC nanoelectronics standardization roadmap 
  • PD IEC/TR 62837:2013 Energy efficiency through automation systems

Publicly Available Specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full standard has yet to be published. 

  • PAS 137:2013 Nanomaterials and nanotechnology-based products. Guide to regulation and standards 
  • PAS 600:2013 Bio-based products. Guide to standards and claims 
  • PAS 777:2013 Specification for the qualification and labelling of used automotive engines and any related transmission units 

Corrigenda to British standards and updated British standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended standards and corrigenda to British standards were made available last month. 

  • BS 8219:2001+A1:2013 Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice
    AMENDMENT 1 
  • BS 10175:2011+A1:2013 Investigation of potentially contaminated sites. Code of practice
    AMENDMENT 1 
  • BS EN 71-1:2011+A2:2013 Safety of toys. Mechanical and physical properties
    AMENDMENT 2 
  • BS EN 474-1:2006+A4:2013 Earth-moving machinery. Safety. General requirements
    AMENDMENT 4 
  • BS EN 1041:2008+A1:2013 Information supplied by the manufacturer of medical devices
    AMENDMENT 1 
  • BS EN ISO 4126-1:2013 Safety devices for protection against excessive pressure. Safety valves
    CORRIGENDUM 1 
  • BS EN 12622:2009+A1:2013 Safety of machine tools. Hydraulic press brakes
    AMENDMENT 1 
  • BS EN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
    CORRIGENDUM 1 
  • BS EN 13071-2:2008+A1:2013 Stationary waste containers up to 5000 l, top lifted and bottom emptied. Additional requirements for underground or partly underground systems
    AMENDMENT 1 
  • BS EN 15383:2012+A1:2013 Plastics piping systems for drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Manholes and inspection chambers
    AMENDMENT 1 
  • BS EN 15587:2008+A1:2013 Cereals and cereal products. Determination of Besatz in wheat (Triticum aestivum L.), durum wheat (Triticum durum Desf.), rye (Secale cereale L.) and feed barley (Hordeum vulgare L.)
    AMENDMENT 1 
  • BS EN 16139:2013 Furniture. Strength, durability and safety. Requirements for non-domestic seating
    CORRIGENDUM 1 
  • BS EN ISO 21672-2:2012 Dentistry. Periodontal probes. Designation
    CORRIGENDUM 1 
  • BS EN ISO 28881:2013 Machine tools. Safety. Electro-discharge machines
    CORRIGENDUM 1 
  • BS EN 50123-3:2003+A1:2013 Railway applications. Fixed installations. D.C. switchgear. Indoor d.c. disconnectors, switchdisconnectors and earthing switches
    AMENDMENT 1 
  • BS EN 50152-1:2012+A1:2013 Railway applications. Fixed installations. Particular requirements for alternating current switchgear. Circuit-breakers with nominal voltage above 1 kV
    AMENDMENT 1 
  • BS EN 50377-16-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    CORRIGENDUM 1 
  • BS EN 50413:2008+A1:2013 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz – 300 GHz)
    AMENDMENT 1 
  • BS EN 50580:2012+A1:2013 Safety of hand-held electric motor operated tools. Particular requirements for spray guns. Particular requirements for spray guns
    AMENDMENT 1 
  • BS EN 60335-1:2012 Household and similar electrical appliances. Safety. General requirements
    CORRIGENDUM 1 
  • BS EN 60529:1992+A2:2013 Degrees of protection provided by enclosures (IP code)
    AMENDMENT 2 
  • BS EN 60598-2-11:2013 Luminaires. Particular requirements. Aquarium luminaires
    CORRIGENDUM 1 
  • BS EN 60670-1:2005+A1:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. General requirements
    AMENDMENT 1 
  • BS EN 60851-3:2009+A1:2013 Winding wires. Test methods. Mechanical properties
    AMENDMENT 1 
  • BS EN 60909-3:2010 Short-circuit currents in three-phase a.c systems. Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
    CORRIGENDUM 1 
  • BS EN 60947-2:2006+A2:2013 Low-voltage switchgear and controlgear. Circuit-breakers
    CORRIGENDUM 1 
  • BS EN 60950-1:2006+A2:2013 Information technology equipment. Safety. General requirements
    AMENDMENT 2 
  • BS EN 61000-3-12:2011 Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase
    CORRIGENDUM 1 
  • BS EN 61029-2-9:2012+A11:2013 Safety of transportable motor-operated electric tools. Particular requirements for mitre saws
    AMENDMENT 11 
  • BS EN 61029-2-10:2010+A11:2013 Safety of transportable motor-operated electric tools. Particular requirements for cutting-off grinders
    CORRIGENDUM 1 
  • BS EN 61029-2-11:2012+A11:2013 Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws
    AMENDMENT 11 
  • BS EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
    CORRIGENDUM 1 
  • BS EN 61954:2011+A1:2013 Static VAR compensators (SVC). Testing of thyristor valves
    AMENDMENT 1 
  • BS ISO/IEC 14443-4:2008+A3:2013 Identification cards. Contactless integrated circuit cards. Proximity cards. Transmission protocol
    AMENDMENT 3

 British standards withdrawn

  • BS 833:1970 Specification for radio interference limits and measurements for the electrical ignition systems of internal combustion engines
    This standard is withdrawn. It has been reviewed by the relevant committee which no longer considers this standard to be relevant 
  • BS 1016-106.4.1:1993 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. Eschka method
    Superseded by BS ISO 334:2013 
  • BS 4568-1:1970 Specification for steel conduit and fittings with metric threads of ISO form for electrical installations. Steel conduit, bends and couplers
    This standard is withdrawn without replacement as it conflicts with BS EN 61386-1:2008 
  • BS 5330:1976 Method of test for estimating the risk of hearing handicap due to noise exposure
    This standard is withdrawn as it is no longer relevant. BS ISO 1999:2013 is now used in preference, but does not supersede BS 5330:1976 
  • BS 5733:1995 Specification for general requirements for electrical accessories
    Superseded by BS 5733:2010 
  • BS 5801:1979 (ISO 4348:1978) Specification for flat-top chains and associated chainwheels for conveyors
    This standard is withdrawn as the equivalent International Standard ISO 4348:1983 has been withdrawn without replacement 
  • BS 6538-2:1992 (ISO 5636-3:1992) Air permeance of paper and board. Method for determination of air permeance using the Bendtsen apparatus
    Superseded by BS ISO 5636-3:2013 
  • BS 6615:1996 (ISO 8062:1994) Specification for dimensional tolerances for metal and metal alloy castings
    Superseded by BS EN ISO 8062-1:2007, BS EN ISO 8062-3:2007 and PD CEN ISO/TS 8062-2:2013 
  • BS EN 649:2011 Resilient floor coverings. Homogenous and heterogenous polyvinyl chloride floor coverings. Specification
    Superseded by BS EN ISO 10581:2013 
  • BS EN 845-1:2003+A1:2008 Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets
    Superseded by BS EN 845-1:2013 
  • BS EN 1232:1997 Workplace atmospheres. Pumps for personal sampling of chemical agents. Requirements and test methods
    Superseded by BS EN ISO 13137:2013 
  • BS EN ISO 4833:2003 Microbiology of food and animal feeding stuffs. Horizontal method for the enumeration of microorganisms. Colony-count technique at 30ºC
    Superseded by BS EN ISO 4833-1:2013 and BS EN ISO 4833-2:2013 
  • BS EN 12098-4:2005 Controls for heating systems. Optimum start-stop control equipment for electrical systems
    Superseded by BS EN 12098-3:2013 
  • BS EN 12919:1999 Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods
    Superseded by BS EN ISO 13137:2013 
  • PD CEN/TS 16318:2012 Fertilizers. Determination of trace elements. Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)
    Superseded by BS EN 16318:2013 
  • PD CEN/TS 16319:2012 Fertilizers. Determination of trace elements. Determination of cadmium, chromium, lead and nickel by inductively coupled plasmaatomic emission spectrometry (ICP-AES) after aqua regia dissolution
    Superseded by BS EN 16319:2013 
  • BS EN 50136-2-1:1998 Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission equipment
    Superseded by BS EN 50136-2:2013 
  • BS EN 50136-2-2:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems using dedicated alarm paths
    Superseded by BS EN 50136-2:2013 
  • BS EN 50136-2-3:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with digital communicators using the public switched telephone network
    Superseded by BS EN 50136-2:2013 
  • BS EN 50136-2-4:1998 Alarm systems. Alarm transmission systems and equipment. Requirements for equipment used in systems with voice communicators using the public switched telephone network
    Superseded by BS EN 50136-2:2013 
  • BS EN 50173-2:2007 Information technology. Generic cabling systems. Office premises
    Superseded by BS EN 50173-2:2007+A1:2010 
  • BS EN 50173-5:2007 Information technology. Generic cabling systems. Data centres
    Superseded by BS EN 50173-5:2007+A1:2010 
  • BS EN 55022:2006+A1:2007 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
    Superseded by BS EN 55022:2006+A2:2010 
  • BS EN 55022:2006+A2:2010 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
    Superseded by BS EN 55022:2010 
  • BS EN 55024:1998+A2:2003 Information technology equipment. Immunity characteristics. Limits and methods of measurement
    Superseded by BS EN 55024:2010 
  • BS EN 60255-8:1998Electrical relays. Thermal electrical relays
    Superseded by BS EN 60255-149:2013 
  • BS EN 60335-2-96:2002 Household and similar electrical appliances. Safety. Particular requirements for flexible sheet heating elements for room heating
    Superseded by BS EN 60335-2-96:2002+A2:2009 
  • BS EN 60745-2-13:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for chain saws
    Superseded by BS EN 60745-2-13:2009+A1:2011 
  • BS EN 60745-2-21:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners
    Superseded by BS EN 60745-2-21:2009+A1:2010 
  • BS EN 60770-2:2003 Transmitters for use in industrial-process control systems. Methods for inspection and routine testing
    Superseded by BS EN 60770-2:2010 
  • BS EN 61803:1999 Determination of power losses in high-voltage direct current (HVDC) converter stations
    Superseded by BS EN 61803:1999+A1:2010 
  • BS EN 62041:2003 Power transformers, power supply units, reactors and similar products. EMC requirements
    Superseded by BS EN 62041:2010 
  • DD CEN ISO/TS 18234-1:2006 Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) datastreams. Introduction, numbering and versions
    Superseded by PD CEN ISO/TS 18234-1:2013 
  • DD CEN ISO/TS 18234-2:2006 Traffic and travel information (TTI). TTI via transport protocol expert group (TPEG) datastreams. Syntax, semantics and framing structure (SSF)
    Superseded by PD CEN ISO/TS 18234-2:2013 
  • DD IEC/PAS 62647-23:2011 Process management for avionics. Aerospace and defence electronic systems containing leadfree solder. Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies
    Superseded by PD IEC/TS 62647-23:2013 

Published in international.