ASTM STANDARDS

Issue 52 – August 2013

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels has been revised to A414/A414M-13 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes has been revised to A564/A564M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A580/A580M Standard Specification for Stainless Steel Wire has been revised to A580/A580M-13a developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip has been revised to A693-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings has been revised to A705/A705M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A712 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys has been reapproved, available as A712-07(2013) developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service has been revised to A744/A744M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) has been reapproved, available as A753-08(2013) developed by Committee A06.02, ASTM BOS Volume 03.04.
  • A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe has been revised to A790/A790M-13a developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications has been revised to A798/A798M-13 developed by Committee A05.17, ASTM BOS Volume 01.06.
  • A838 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications has been reapproved, available as A838-02(2013) developed by Committee A06.02, ASTM BOS Volume 03.04.
  • A861 Standard Specification for High-Silicon Iron Pipe and Fittings has been reapproved, available as A861-04(2013) developed by Committee A04.12, ASTM BOS Volume 01.02.
  • A867 Standard Specification for Iron-Silicon Relay Steels has been reapproved, available as A867-03(2013) developed by Committee A06.02, ASTM BOS Volume 03.04.
  • A908 Standard Specification for Stainless Steel Needle Tubing has been reapproved, available as A908-03(2013) developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings has been revised to A960/A960M-13 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range has been revised to A962/A962M-13a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A977/A977M Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs has been reapproved, available as A977/A977M-07(2013) developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys has been revised to A994-13 developed by Committee A01.91, ASTM BOS Volume 01.01.
  • B94 Standard Specification for Magnesium-Alloy Die Castings has been revised to B94-13 developed by Committee B07.04, ASTM BOS Volume 02.02.
  • B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate has been revised to B265-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers has been revised to B338-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications has been reinstated, with revision to B483/B483M-13 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B545 Standard Specification for Electrodeposited Coatings of Tin has been revised to B545-13 developed by Committee B08.06, ASTM BOS Volume 02.05.
  • B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys has been revised to B807/B807M-13 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection has been revised to B843-13 developed by Committee B07.04, ASTM BOS Volume 02.02.
  • B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe has been revised to B862-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B863 Standard Specification for Titanium and Titanium Alloy Wire has been revised to B863-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B864/B864M Standard Specification for Corrugated Aluminum Box Culverts has been revised to B864/B864M-13 developed by Committee B07.08, ASTM BOS Volume 02.02.
  • B953 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis has been revised to B953-13 developed by Committee B07.04, ASTM BOS Volume 02.02.
  • C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale) has been revised to C32-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C50/C50M Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products has been revised (with designation change) to C50/C50M-13 developed by Committee C07.06, ASTM BOS Volume 04.01.
  • C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) has been revised to C62-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C90 Standard Specification for Loadbearing Concrete Masonry Units has been revised to C90-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units has been revised to C126-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) has been revised to C216-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement has been revised to C230/C230M-13 developed by Committee C01.22, ASTM BOS Volume 04.01.
  • C279 Standard Specification for Chemical-Resistant Masonry Units has been revised to C279-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C283 Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid has been revised to C283-13 developed by Committee B08.12, ASTM BOS Volume 02.05.
  • C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency has been revised to C305-13 developed by Committee C01.22, ASTM BOS Volume 04.01.
  • C410 Standard Specification for Industrial Floor Brick has been revised to C410-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction has been revised to C474-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form has been revised to C534/C534M-13 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C602 Standard Specification for Agricultural Liming Materials has been revised to C602-13 developed by Committee C07.02, ASTM BOS Volume 04.01.
  • C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) has been revised to C652-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C778 Standard Specification for Standard Sand has been revised to C778-13 developed by Committee C01.95, ASTM BOS Volume 04.01.
  • C859 Standard Terminology Relating to Nuclear Materials has been revised to C859-13 developed by Committee C26.01, ASTM BOS Volume 12.01.
  • C902 Standard Specification for Pedestrian and Light Traffic Paving Brick has been revised to C902-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals has been reapproved, available as C923-08(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) has been reapproved, available as C923M-08b(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units has been revised to C936/C936M-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C980 Standard Specification for Industrial Chimney Lining Brick has been revised to C980-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units has been reapproved, available as C1006-07(2013) developed by Committee C15.04, ASTM BOS Volume 04.05.
  • C1019 Standard Test Method for Sampling and Testing Grout has been revised to C1019-13 developed by Committee C12.02, ASTM BOS Volume 04.05.
  • C1054 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens has been revised to C1054-13 developed by Committee C08.09, ASTM BOS Volume 15.01.
  • C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale has been revised to C1088-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) has been revised to C1107/C1107M-13 developed by Committee C09.43, ASTM BOS Volume 04.02.
  • C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation has been revised to C1126-13 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1142 Standard Specification for Extended Life Mortar for Unit Masonry has been reapproved, available as C1142-95(2013) developed by Committee C12.03, ASTM BOS Volume 04.05.
  • C1298 Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys has been reapproved, available as C1298-95(2013) developed by Committee C15.05, ASTM BOS Volume 04.05.
  • C1344 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method has been reapproved, available as C1344-97(2013) developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals has been reapproved, available as C1478-08(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) has been reapproved, available as C1478M-08a(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete has been revised to C1758/C1758M-13 developed by Committee C09.47, ASTM BOS Volume 04.02.
  • C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete has been revised to C1761/C1761M-13 developed by Committee C09.21, ASTM BOS Volume 04.02.
  • C1780 Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer is a new standard, now available. C1780-13 developed by Committee C15.05, ASTM BOS Volume 04.05.
  • D8 Standard Terminology Relating to Materials for Roads and Pavements has been revised to D8-13a developed by Committee D04.91, ASTM BOS Volume 04.03.
  • D333 Standard Guide for Clear and Pigmented Lacquers has been reapproved, available as D333-01(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D396 Standard Specification for Fuel Oils has been revised to D396-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D451 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products has been reapproved (with editorial change), available as D451/D451M-91(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D452 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products has been reapproved (with editorial change), available as D452/D452M-91(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D476 Standard Classification for Dry Pigmentary Titanium Dioxide Products has been revised to D476-13 developed by Committee D01.31, ASTM BOS Volume 06.03.
  • D618 Standard Practice for Conditioning Plastics for Testing has been revised to D618-13 developed by Committee D20.50, ASTM BOS Volume 08.01.
  • D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact has been revised to D746-13 developed by Committee D20.30, ASTM BOS Volume 08.01.
  • D801 Standard Test Methods for Sampling and Testing Dipentene has been reapproved, available as D801-02(2013) developed by Committee D01.34, ASTM BOS Volume 06.03.
  • D802 Standard Test Methods for Sampling and Testing Pine Oils has been reapproved, available as D802-02(2013) developed by Committee D01.34, ASTM BOS Volume 06.03.
  • D889 Standard Test Method for Volatile Oil in Rosin has been revised to D889-13 developed by Committee D01.34, ASTM BOS Volume 06.03.
  • D892 Standard Test Method for Foaming Characteristics of Lubricating Oils has been revised to D892-13 developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D904 Standard Practice for Exposure of Adhesive Specimens to Artificial Light has been reapproved, available as D904-99(2013) developed by Committee D14.40, ASTM BOS Volume 15.06.
  • D977 Standard Specification for Emulsified Asphalt has been revised to D977-13 developed by Committee D04.41, ASTM BOS Volume 04.03.
  • D1101 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use has been reapproved, available as D1101-97a(2013) developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D1126 Standard Test Method for Hardness in Water has been revised to D1126-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents has been revised to D1133-13 developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load has been reapproved, available as D1143/D1143M-07(2013) developed by Committee D18.11, ASTM BOS Volume 04.08.
  • D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes has been reapproved, available as D1308-02(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D1435 Standard Practice for Outdoor Weathering of Plastics has been revised to D1435-13 developed by Committee D20.50, ASTM BOS Volume 08.01.
  • D1669/D1669M Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings has had a change in designation. The new designation is D1669/D1669M-07(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D1734 Standard Practice for Making Cementitious Panels for Testing Coatings has been reapproved, available as D1734-93(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
  • D1795 Standard Test Method for Intrinsic Viscosity of Cellulose has been revised to D1795-13 developed by Committee D01.36, ASTM BOS Volume 06.03.
  • D1828 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures has been reapproved, available as D1828-01(2013) developed by Committee D14.40, ASTM BOS Volume 15.06.
  • D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy has been revised to D1976-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions has been reapproved, available as D2067-97(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
  • D2074 Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method has been reapproved, available as D2074-07(2013) developed by Committee D01.33, ASTM BOS Volume 06.03.
  • D2178/D2178M Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing has been reinstated as D2178/D2178M-13 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D2199 Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers has been reapproved, available as D2199-03(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces has been revised to D2200-13 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D2338 Standard Test Method for Determining Particle Size of Multicolor Lacquers has been reapproved, available as D2338-02(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D2420 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) has been revised to D2420-13 developed by Committee D02.H0, ASTM BOS Volume 05.01.
  • D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes has been revised to D2523-13 developed by Committee D08.20, ASTM BOS Volume 04.04.
  • D2813 Standard Practice for Sampling Leather for Physical and Chemical Tests has been reapproved, available as D2813-03(2013) developed by Committee D31.07, ASTM BOS Volume 15.04.
  • D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique has been revised to D2885-13 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D2967 Standard Test Method for Corner Coverage of Powder Coatings has been reapproved, available as D2967-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
  • D2976 Standard Test Method for pH of Peat Materials (Withdrawn 2013) has been withdrawn, with no replacement. D2976-71(2004) developed by Committee D18.22, ASTM BOS Volume 04.08.
  • D3147 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants has been reapproved, available as D3147-06(2013) developed by Committee D15.09, ASTM BOS Volume 15.05.
  • D3231 Standard Test Method for Phosphorus in Gasoline has been revised to D3231-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D3320 Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) (Withdrawn 2013) has been withdrawn, with no replacement. D3320-00(2004)e1 developed by Committee D08.09, ASTM BOS Volume 04.04.
  • D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction has been revised to D3381/D3381M-13 developed by Committee D04.40, ASTM BOS Volume 04.03.
  • D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers has been reapproved, available as D3404-91(2013) developed by Committee D18.21, ASTM BOS Volume 04.08.
  • D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing has been reapproved (with editorial change), available as D3468/D3468M-99(2013)e1 developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D3585 Standard Specification for ASTM Reference Fluid for Coolant Tests has been reapproved, available as D3585-08(2013) developed by Committee D15.01, ASTM BOS Volume 15.05.
  • D3689/D3689M Standard Test Methods for Deep Foundations Under Static Axial Tensile Load has been reapproved (with editorial change), available as D3689/D3689M-07(2013)e1 developed by Committee D18.11, ASTM BOS Volume 04.08.
  • D3699 Standard Specification for Kerosine has been revised to D3699-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D3808 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion has been reapproved, available as D3808-01(2013) developed by Committee D14.40, ASTM BOS Volume 15.06.
  • D3876 Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography has been reapproved, available as D3876-96(2013) developed by Committee D01.36, ASTM BOS Volume 06.03.
  • D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load has been reapproved (with editorial change), available as D3966/D3966M-07(2013)e1 developed by Committee D18.11, ASTM BOS Volume 04.08.
  • D4066 Standard Classification System for Nylon Injection and Extrusion Materials (PA) has been reinstated as D4066-13 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D4085 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry has been reapproved, available as D4085-93(2013) developed by Committee D01.36, ASTM BOS Volume 06.03.
  • D4107 Standard Test Method for Tritium in Drinking Water has been reapproved, available as D4107-08(2013) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D4147 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar has been reapproved, available as D4147-99(2013) developed by Committee D01.53, ASTM BOS Volume 06.02.
  • D4217 Standard Test Method for Gel Time of Thermosetting Coating Powder has been reapproved, available as D4217-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
  • D4242 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders has been reapproved, available as D4242-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
  • D4249 Standard Test Method for Enumeration of Candida albicans in Water (Withdrawn 2013) has been withdrawn, with no replacement. D4249-83(2005) developed by Committee D19.24, ASTM BOS Volume 11.02.
  • D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination has been revised to D4306-13 developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
  • D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter has been revised to D4308-13 developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
  • D4309 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water has been revised to D4309-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D4496 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials has been reinstated as D4496-13 developed by Committee D09.12, ASTM BOS Volume 10.02.
  • D4562 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen has been reapproved, available as D4562-01(2013) developed by Committee D14.60, ASTM BOS Volume 15.06.
  • D4564 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method (Withdrawn 2013) has been withdrawn, with no replacement. D4564-08e1 developed by Committee D18.08, ASTM BOS Volume 04.08.
  • D4682 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants has been revised to D4682-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
  • D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application has been reapproved, available as D4707-09(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D4731 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable has been revised to D4731-13 developed by Committee D09.18, ASTM BOS Volume 10.02.
  • D4799 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) has been reapproved (with editorial change), available as D4799/D4799M-08(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel has been revised to D4806-13a developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-13a developed by Committee D02.A0.01, ASTM BOS Volume 05.02.
  • D4858 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines has been revised to D4858-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
  • D4859 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC has been revised to D4859-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
  • D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) has been revised to D4860-13 developed by Committee D02.14, ASTM BOS Volume 05.02.
  • D4863 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants has been revised to D4863-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
  • D4938 Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water has been reapproved, available as D4938-89(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
  • D4939 Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater has been reapproved, available as D4939-89(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
  • D5068 Standard Practice for Preparation of Paint Brushes for Evaluation has been reapproved, available as D5068-04(2013) developed by Committee D01.61, ASTM BOS Volume 06.02.
  • D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments has been reapproved, available as D5095-91(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
  • D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone has been reapproved, available as D5107-03(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
  • D5136 Standard Specification for High Purity p-Xylene has been reapproved, available as D5136-09(2013) developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller has been reapproved, available as D5150-92(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D5227 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins has been revised to D5227-13 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D5266 Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints has been revised to D5266-13 developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D5309 Standard Specification for Cyclohexane 999 has been reapproved (with editorial change), available as D5309-08(2013)e1 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5326 Standard Test Method for Color Development in Tinted Latex Paints has been reapproved, available as D5326-94a(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D5327 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions has been reapproved, available as D5327-97(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D5382 Standard Guide to Evaluation of Optical Properties of Powder Coatings has been reapproved, available as D5382-02(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
  • D5395 Standard Specification for Reclaimed Methylene Chloride has been reapproved, available as D5395-03(2013) developed by Committee D26.02, ASTM BOS Volume 15.05.
  • D5403 Standard Test Methods for Volatile Content of Radiation Curable Materials has been reapproved, available as D5403-93(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D5456 Standard Specification for Evaluation of Structural Composite Lumber Products has been revised to D5456-13 developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D5479 Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed has been reapproved, available as D5479-94(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
  • D5499 Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems has been reapproved, available as D5499-94(2013) developed by Committee D33.09, ASTM BOS Volume 06.02.
  • D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography has been editorially changed, available as D5501-12e1 developed by Committee D02.04.0L, ASTM BOS Volume 05.02.
  • D5548 Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings) has been revised to D5548-13 developed by Committee D12.25, ASTM BOS Volume 15.04.
  • D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock has been reapproved, available as D5606-09(2013) developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry has been reapproved, available as D5703-95(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
  • D5710/D5710M Standard Specification for Trinidad Lake Modified Asphalt has been revised (with designation change) to D5710/D5710M-13 developed by Committee D04.40, ASTM BOS Volume 04.03.
  • D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013) has been withdrawn, with no replacement. D5730-04 developed by Committee D18.01, ASTM BOS Volume 04.08.
  • D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines has been revised to D5797-13 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines has been revised to D5798-13a developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens has been reapproved, available as D5860-95(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
  • D5861 Standard Guide for Significance of Particle Size Measurements of Coating Powders has been reapproved, available as D5861-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
  • D5912 Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) (Withdrawn 2013) has been withdrawn, with no replacement. D5912-96(2004) developed by Committee D18.21, ASTM BOS Volume 04.09.
  • D5965 Standard Test Methods for Specific Gravity of Coating Powders has been reapproved, available as D5965-02(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
  • D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel has been revised to D5983-13 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
  • D6073 Standard Test Method for Relative Setting of Heatset Printing Inks has been reapproved, available as D6073-08a(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
  • D6076 Standard Test Method for Shrinkage Temperature of Leather has been reapproved, available as D6076-08(2013) developed by Committee D31.07, ASTM BOS Volume 15.04.
  • D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes has been revised to D6108-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products has been revised to D6109-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6111 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement has been revised to D6111-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6112 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes has been revised to D6112-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6117 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes has been revised to D6117-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings has been reapproved, available as D6279-03(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D6316 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke has been editorially changed, available as D6316-09be1 developed by Committee D05.29, ASTM BOS Volume 05.06.
  • D6341 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) has been revised to D6341-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6373 Standard Specification for Performance Graded Asphalt Binder has been revised to D6373-13 developed by Committee D04.40, ASTM BOS Volume 04.03.
  • D6488 Standard Terminology Relating to Print Problems has been reapproved, available as D6488-08(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
  • D6574/D6574M Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow has been revised (with designation change) to D6574/D6574M-13 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D6604 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry has been reapproved, available as D6604-00(2013) developed by Committee D01.34, ASTM BOS Volume 06.03.
  • D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards has been revised to D6662-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D6687 Standard Guide for Testing Printing Ink Vehicles and Components Thereof has been reapproved, available as D6687-07(2013) developed by Committee D01.37, ASTM BOS Volume 06.03.
  • D6849 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods has been revised to D6849-13 developed by Committee D02.08, ASTM BOS Volume 05.03.
  • D6887 Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions has been reapproved, available as D6887-03(2013) developed by Committee D01.37, ASTM BOS Volume 06.03.
  • D6903 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water has been reapproved, available as D6903-07(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
  • D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry has been reapproved, available as D6904-03(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
  • D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) has been revised to D6933-13 developed by Committee D04.42, ASTM BOS Volume 04.03.
  • D6947/D6947M Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System has had a change in designation. The new designation is D6947/D6947M-07(2013)e1 developed by Committee D08.06, ASTM BOS Volume 04.04.
  • D6989 Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions has been reapproved, available as D6989-03(2013) developed by Committee D01.37, ASTM BOS Volume 06.03.
  • D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings has been reapproved, available as D7072-04(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions has been revised to D7101-13 developed by Committee D18.25, ASTM BOS Volume 04.09.
  • D7180/D7180M Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects has had a change in designation. The new designation is D7180/D7180M-05(2013)e1 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D7225 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors has been revised to D7225-13 developed by Committee D12.16, ASTM BOS Volume 15.04.
  • D7230 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates has been reapproved, available as D7230-06(2013) developed by Committee D33.02, ASTM BOS Volume 06.02.
  • D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications has been revised to D7239-13 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings has been reapproved, available as D7270-07(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
  • D7305 Standard Test Method for Reflection Density of Printed Matter has been reapproved, available as D7305-08a(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
  • D7306 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation has been reapproved, available as D7306-07(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions has been revised to D7322-13 developed by Committee D18.25, ASTM BOS Volume 04.09.
  • D7430 Standard Practice for Mechanical Sampling of Coal has been revised to D7430-13 developed by Committee D05.23, ASTM BOS Volume 05.06.
  • D7437 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants has been reapproved, available as D7437-08(2013) developed by Committee D15.06, ASTM BOS Volume 15.05.
  • D7476 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins has been reapproved, available as D7476-08(2013) developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D7477 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water has been reapproved, available as D7477-08(2013) developed by Committee D31.02, ASTM BOS Volume 15.04.
  • D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer has been revised to D7483-13a developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions has been reapproved, available as D7489-09(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D7557/D7557M Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens has been reapproved (with editorial change), available as D7557/D7557M-09(2013)e1 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D7568 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications has been revised to D7568-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D7834 Standard Test Method for Filling Material Shedding of Paint Brushes has been revised to D7834-13 developed by Committee D01.61, ASTM BOS Volume 06.02.
  • D7865 Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels is a new standard, now available. D7865-13 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings is a new standard, now available. D7869-13 developed by Committee D01.27, ASTM BOS Volume 06.01.
  • D7870/D7870M Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure is a new standard, now available. D7870/D7870M-13 developed by Committee D04.22, ASTM BOS Volume 04.03.
  • D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) is a new standard, now available. D7871-13 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • E1 Standard Specification for ASTM?Liquid-in-Glass Thermometers has been revised to E1-13 developed by Committee E20.05, ASTM BOS Volume 14.03.
  • E84 Standard Test Method for Surface Burning Characteristics of Building Materials has been revised to E84-13a developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E164 Standard Practice for Contact Ultrasonic Testing of Weldments has been revised to E164-13 developed by Committee E07.06, ASTM BOS Volume 03.03.
  • E192 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications has been revised to E192-13 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves has been revised to E305-13 developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E344 - Terminology Relating to Thermometry and Hydrometry has been revised to E344-13 developed by Committee E20.91, ASTM BOS Volume 14.03.
  • E449 Standard Test Methods for Analysis of Calcium Chloride has been reapproved, available as E449-08(2013) developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E574 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation has been revised to E574-13 developed by Committee E20.04, ASTM BOS Volume 14.03.
  • E907 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013) has been withdrawn, with no replacement. E907-96(2004) developed by Committee D08.20, ASTM BOS Volume 04.04.
  • E1316 Standard Terminology for Nondestructive Examinations has been revised to E1316-13c developed by Committee E07.92, ASTM BOS Volume 03.03.
  • E1417/E1417M Standard Practice for Liquid Penetrant Testing has been revised to E1417/E1417M-13 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1475 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data has been revised to E1475-13 developed by Committee E07.11, ASTM BOS Volume 03.03.
  • E1549/E1549M Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations has been revised (with designation change) to E1549/E1549M-13 developed by Committee E21.05, ASTM BOS Volume 15.03.
  • E1857 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces has been editorially changed, available as E1857-97(2013)e1 developed by Committee E06.24, ASTM BOS Volume 04.11.
  • E2135 Standard Terminology for Property and Asset Management has been editorially changed, available as E2135-10ae1 developed by Committee E53.06, ASTM BOS Volume 04.12.
  • E2350 Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems has been reapproved, available as E2350-07(2013) developed by Committee E34.85, ASTM BOS Volume 11.03.
  • E2361 Standard Guide for Testing Leave-On Products Using In-Situ Methods has been revised to E2361-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry has been revised to E2465-13 developed by Committee E01.08, ASTM BOS Volume 03.05.
  • E2630 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source has been reapproved, available as E2630-08(2013) developed by Committee E12.05, ASTM BOS Volume 06.01.
  • E2766 Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs is a new standard, now available. E2766-13 developed by Committee E44.09, ASTM BOS Volume 12.02.
  • E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion has been revised to E2792-13 developed by Committee E01.04, ASTM BOS Volume 03.05.
  • E2820 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors has been revised to E2820-13 developed by Committee E20.04, ASTM BOS Volume 14.03.
  • E2876 Standard Guide for Integrating Sustainable Objectives into Cleanup is a new standard, now available. E2876-13 developed by Committee E50.04, ASTM BOS Volume 11.05.
  • E2912 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction is a new standard, now available. E2912-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2928/E2928M Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique is a new standard, now available. E2928/E2928M-13 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E2933 Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications is a new standard, now available. E2933-13 developed by Committee E54.01, ASTM BOS Volume 15.08.
  • F17 Standard Terminology Relating to Flexible Barrier Packaging has been revised to F17-13 developed by Committee F02.50, ASTM BOS Volume 15.10.
  • F34 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials has been revised to F34-13 developed by Committee F02.15, ASTM BOS Volume 15.10.
  • F86 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants has been revised to F86-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring has been reapproved, available as F150-06(2013) developed by Committee F06.20, ASTM BOS Volume 15.04.
  • F307 Standard Practice for Sampling Pressurized Gas for Gas Analysis has been revised to F307-13 developed by Committee E21.05, ASTM BOS Volume 15.03.
  • F331 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator) has been revised to F331-13 developed by Committee E21.05, ASTM BOS Volume 15.03.
  • F381 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines has been revised to F381-13 developed by Committee F08.17, ASTM BOS Volume 15.07.
  • F432 Standard Specification for Roof and Rock Bolts and Accessories has been revised to F432-13 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F538 Standard Terminology Relating to the Characteristics and Performance of Tires has been revised to F538-13 developed by Committee F09.94, ASTM BOS Volume 09.02.
  • F543 Standard Specification and Test Methods for Metallic Medical Bone Screws has been revised to F543-13 developed by Committee F04.21, ASTM BOS Volume 13.01.
  • F720 Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test has been revised to F720-13 developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F1000 Standard Practice for Piping System Drawing Symbols has been reinstated as F1000-13 developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1140/F1140M Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages has been revised (with designation change) to F1140/F1140M-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F1700 Standard Specification for Solid Vinyl Floor Tile has been revised to F1700-13a developed by Committee F06.80, ASTM BOS Volume 15.04.
  • F1731 Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing has been reapproved, available as F1731-96(2013) developed by Committee F23.60, ASTM BOS Volume 11.03.
  • F1821 Standard Consumer Safety Specification for Toddler Beds has been revised to F1821-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F1827 Standard Terminology Relating to Food Service Equipment has been revised to F1827-13 developed by Committee F26.91, ASTM BOS Volume 15.12.
  • F2054/F2054M Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates has been revised (with designation change) to F2054/F2054M-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2219 Standard Test Methods for Measuring High-Speed Bat Performance has been revised to F2219-13 developed by Committee F08.26, ASTM BOS Volume 15.07.
  • F2225 Standard Safety Specification for Consumer Trampoline Enclosures has been revised to F2225-13 developed by Committee F08.17, ASTM BOS Volume 15.07.
  • F2407 Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities has been reapproved (with editorial change), available as F2407-06(2013)e1 developed by Committee F23.40, ASTM BOS Volume 11.03.
  • F2503 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment has been revised to F2503-13 developed by Committee F04.15, ASTM BOS Volume 13.02.
  • F2547 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment has been reapproved, available as F2547-06(2013) developed by Committee F23.70, ASTM BOS Volume 11.03.
  • F2675/F2675M Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection is a new standard, now available. F2675/F2675M-13 developed by Committee F18.65, ASTM BOS Volume 10.03.
  • F2700 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating has been reapproved, available as F2700-08(2013) developed by Committee F23.80, ASTM BOS Volume 11.03.
  • F2703 Standard Test Method for Unsteady-Sss

    Issue 52 – August 2013

    You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

    BRITISH PUBLICATIONS

    The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

    • BS 1881-210:2013 Testing hardened concrete. Determination of the potential carbonation resistance of concrete. Accelerated carbonation method

    BS EN PUBLICATIONS

    The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

    • BS EN 71-3:2013 Safety of toys. Migration of certain elements
      Supersedes BS EN 71-3:1995
    • BS EN 71-5:2013 Safety of toys. Chemical toys (sets) other than experimental sets
      Supersedes BS EN 71-5:1993+A2:2009
    • BS EN 71-12:2013 Safety of toys. N-Nitrosamines and N-Nitrosatable substances
    • BS EN 196-2:2013 Method of testing cement. Chemical analysis of cement
      Supersedes BS EN 196-2:2005
    • BS EN ISO 377:2013 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
      Supersedes BS EN ISO 377:1997
    • BS EN 495-5:2013 Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing
      Supersedes BS EN 495-5:2001
    • BS EN 927-1:2013 Paints and varnishes. Coating materials and coating systems for exterior wood. Classification and selection
      Supersedes BS EN 927-1:1997
    • BS EN 1097-6:2013 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
      Supersedes BS EN 1097-6:2000
    • BS EN 1304:2013 Clay roofing tiles and fittings. Product definitions and specifications
      Supersedes BS EN 1304:2005
    • BS EN 1360:2013 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
      Supersedes BS EN 1360:2005
    • BS EN 1429:2013 Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
      Supersedes BS EN 1429:2009
    • BS EN 1844:2013 Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing
      Supersedes BS EN 1844:2001
    • BS EN 1932:2013 External blinds and shutters. Resistance to wind loads. Method of testing and performance criteria
      Supersedes BS EN 1932:2001
    • BS EN ISO 3452-1:2013 Non-destructive testing. Penetrant testing. General principles
      Supersedes BS EN 571-1:1997
    • BS EN ISO 3826-1:2013 Plastics collapsible containers for human blood and blood components. Conventional containers
      Supersedes BS EN ISO 3826-1:2003
    • BS EN ISO 6847:2013 Welding consumables. Deposition of a weld metal pad for chemical analysis
      Supersedes BS EN ISO 6847:2001
    • BS EN 10209:2013 Cold rolled low carbon steel flat products for vitreous enameling. Technical delivery conditions
      Supersedes BS EN 10209:1996
    • BS EN ISO 11137-2:2013 Sterilization of health care products. Radiation. Establishing the sterilization dose
      Supersedes BS EN ISO 11137-2:2012
    • BS EN ISO 11297-3:2013 Plastics piping systems for renovation of underground drainage and sewerage networks under pressure. Lining with close-fit pipes
    • BS EN ISO 11439:2013 Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles
      Supersedes BS EN ISO 11439:2000
    • BS EN 12311-2:2013 Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
      Supersedes BS EN 12311-2:2010
    • BS EN 12316-2:2013 Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing
      Supersedes BS EN 12316-2:2000
    • BS EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
    • BS EN 12697-3:2013 Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery: Rotary evaporator
      Supersedes BS EN 12697-3:2005
    • BS EN ISO 12932:2013 Welding. Laser-arc hybrid welding of steels, nickel and nickel alloys. Quality levels for imperfections
    • BS EN ISO 12996:2013 Mechanical joining. Destructive testing of joints. Specimen dimensions and test procedure for tensile shear testing of single joints
    • BS EN 13330:2013 Shutters. Hard body impact and prevention of access. Test methods
      Supersedes BS EN 13330:2002
    • BS EN 13418:2013 Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
      Supersedes BS EN 13418:2004+A1:2008
    • BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
      Supersedes BS EN 13483:2005
    • BS EN 13600:2013 Copper and copper alloys. Seamless copper tubes for electrical purposes
      Supersedes BS EN 13600:2002
    • BS EN 13601:2013 Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
      Supersedes BS EN 13601:2002
    • BS EN 13603:2013 Copper and copper alloys. Test methods for assessing protective tin coatings on drawn round copper wire for electrical purposes
      Supersedes BS EN 13603:2002
    • BS EN 13604:2013 Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper
      Supersedes BS EN 13604:2002
    • BS EN 13605:2013 Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
      Supersedes BS EN 13605:2002
    • BS EN ISO 13686:2013 Natural gas. Quality designation
      Supersedes BS EN ISO 13686:2005
    • BS EN 13776:2013 LPG equipment and accessories. Filling and discharge procedures for LPG road tankers
      Supersedes BS EN 13776:2002
    • BS EN 13906-2:2013 Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs
      Supersedes BS EN 13906-2:2001
    • BS EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
      Supersedes BS EN 14125:2004
    • BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
      Supersedes BS EN 14141:2003
    • BS EN 14227-4:2013 Hydraulically bound mixtures. Specifications. Fly ash for hydraulically bound mixtures
      Supersedes BS EN 14227-4:2004
    • BS EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
      Supersedes BS EN 14422:2004
    • BS EN 14423:2013 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
      Supersedes BS EN 14423:2004
    • BS EN 14424:2013 Hose fittings with screwed ferrules
      Supersedes BS EN 14424:2004
    • BS EN 15213-1:2013 Intelligent transport systems. After-theft systems for the recovery of stolen vehicles. Reference architecture and terminology
      Supersedes DD CEN/TS 15213-1:2005
    • BS EN 15213-2:2013 Intelligent transport systems. After-theft systems for the recovery of stolen vehicles. Common status message elements
      Supersedes DD CEN/TS 15213-2:2006
    • BS EN 15213-3:2013 Intelligent transport systems. After-theft systems for the recovery of stolen vehicles. Interface and system requirements in terms of short range communication system
      Supersedes DD CEN/TS 15213-3:2006
    • BS EN 15213-4:2013 Intelligent transport systems. After-theft systems for the recovery of stolen vehicles. Interface and system requirements in terms of long range communication system
      Supersedes DD CEN/TS 15213-4:2006
    • BS EN 15213-5:2013 Intelligent transport systems. After-theft systems for the recovery of stolen vehicles. Messaging interface
      Supersedes DD CEN/TS 15213-5:2006
    • BS EN 15286:2013 Agglomerated stone. Slabs and tiles for wall finishes (internal and external)
    • BS EN 15955-2:2013 Railway applications. Track. Demountable machines and associated equipment. General safety requirements
    • BS EN 16205:2013 Laboratory measurement of walking noise on floors
    • BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. General requirements
    • BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for resin, curing systems, additives and modifiers
    • BS EN 16245-3:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fibre
    • BS EN 16245-4:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for fabrics
    • BS EN 16245-5:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics. Specific requirements for core materials
    • BS EN 16313:2013 Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G 3?4 A and inside cone
    • BS EN 16314:2013 Gas meters. Additional functionalities
    • BS EN 16337:2013 Hardware for furniture. Strength and loading capacity of shelf supports
    • BS EN 16348:2013 Gas infrastructure. Safety Management System (SMS) for gas transmission infrastructure and Pipeline Integrity Management System (PIMS) for gas transmission pipelines. Functional requirements
    • BS EN ISO 16851:2013 Textile conveyor belts. Determination of the net length of an endless (spliced) conveyor belt
      Supersedes BS EN ISO 16851:2004
    • BS EN ISO 19232-1:2013 Non-destructive testing. Image quality of radiographs. Determination of the image quality value using wire-type image quality indicators
      Supersedes BS EN 462-1:1994
    • BS EN ISO 19232-2:2013 Non-destructive testing. Image quality of radiographs. Determination of the image quality value using step/hole-type image quality indicators
      Supersedes BS EN 462-2:1994
    • BS EN ISO 19232-3:2013 Non-destructive testing. Image quality of radiographs. Image quality classes
      Supersedes BS EN 462-3:1997
    • BS EN ISO 19232-4:2013 Non-destructive testing. Image quality of radiographs. Experimental evaluation of image quality values and image quality tables
      Supersedes BS EN 462-4:1995
    • BS EN ISO 19232-5:2013 Non-destructive testing. Image quality of radiographs. Determination of the image unsharpness value using duplex wire-type image quality indicators
      Supersedes BS EN 462-5:1996
    • BS EN ISO 21549-1:2013 Health informatics. Patient healthcard data. General structure
      Supersedes BS EN ISO 21549-1:2004
    • BS EN ISO 29022:2013 Dentistry. Adhesion. Notched-edge shear bond strength test
    • BS EN 50541-2:2013 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV. Determination of loadability of a transformer loaded with non-sinusoidal current
      Supersedes BS 7844-3:1998
    • BS EN 60335-2-79:2012 Household and similar electrical appliances. Safety. Particular requirements for high pressure cleaners and steam cleaners
      Supersedes BS EN 60335-2-79:2009 which remains current
    • BS EN 61169-43:2013 Radio-frequency connectors. Sectional specification for RBMA series blind mating RF coaxial connectors
    • BS EN 61193-3:2013 Quality assessment systems. Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
    • BS EN 61526:2013 Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters
      Supersedes BS EN 61526:2007
    • BS EN 61968-11:2013 Application integration at electric utilities. System interfaces for distribution management. Common information model (CIM) extensions for distribution
      Supersedes BS EN 61968-11:2010
    • BS EN 62271-110:2012 High-voltage switchgear and controlgear. Inductive load switching
      Supersedes BS EN 62271-110:2009

    BS ENs IMPLEMENTED BY AMENDMENT

    • BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
      Implementation of European Standard EN ISO 294-5 by amendment to BS ISO 294-5:2011
    • BS EN ISO 3665:2013 Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications
      Implementation of European Standard EN ISO 3665 by amendment to BS ISO 3665:2011
    • BS EN ISO 8611-2:2012 Pallets for materials handling. Flat pallets. Performance requirements and selection of tests
      Implementation of European Standard EN ISO 8611-2 by amendment to BS ISO 8611-2:2011
    • BS EN ISO 9233-1:2013 Cheese, cheese rind and processed cheese. Determination of natamycin content. Molecular absorption spectrometric method for cheese rind
      Implementation of European Standard EN ISO 9233-1 by amendment to BS ISO 9233-1:2007+A1:2012
    • BS EN ISO 11269-2:2013 Soil quality. Determination of the effects of pollutants on soil flora. Effects of contaminated soil on the emergence and early growth of higher plants
      Implementation of European Standard EN ISO 11269-2 by amendment to BS ISO 11269-2:2012
    • BS EN ISO 11664-3:2013 Colorimetry. CIE tristimulus values
      Implementation of European Standard EN ISO 11664-3 by amendment to BS ISO 11664-3:2012
    • BS EN ISO 12779:2013 Lactose. Determination of water content. Karl Fischer method
      Implementation of European Standard EN ISO 12779 by amendment to BS ISO 12779:2011
    • BS EN ISO 13088:2012 Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection
      Implementation of European Standard EN ISO 13088 by amendment to BS ISO 13088:2011
    • BS EN ISO 15527:2013 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
      Implementation of European Standard EN ISO 15527 by amendment to BS ISO 15527:2010
    • BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
      Implementation of European Standard EN ISO 19712-1 by amendment to BS ISO 19712-1:2008
    • BS EN ISO 22155:2013 Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
      Implementation of European Standard EN ISO 22155 by amendment to BS ISO 22155:2011
    • BS EN ISO 23611-5:2013 Soil quality. Sampling of soil invertebrates. Sampling and extraction of soil macroinvertebrates
      Implementation of European Standard EN ISO 23611-5 by amendment to BS ISO 23611-5:2011
    • BS EN ISO 80000-3:2013 Quantities and units. Space and time
      Implementation of European Standard EN ISO 80000-3 by amendment to BS ISO 80000-3:2007
    • BS EN ISO 80000-4:2013 Quantities and units. Mechanics
      Implementation of European Standard EN ISO 80000-4 by amendment to BS ISO 80000-4:2006
    • BS EN ISO 80000-5:2013 Quantities and units. Thermodynamics
      Implementation of European Standard EN ISO 80000-5 by amendment to BS ISO 80000-5:2007
    • BS EN ISO 80000-9:2013+A1:2011 Quantities and units. Physical chemistry and molecular physics
      Implementation of European Standard EN ISO 80000-9 by amendment to BS ISO 80000-9:2009
    • BS EN ISO 80000-10:2013 Quantities and units. Atomic and nuclear physics
      Implementation of European Standard EN ISO 80000-10 by amendment to BS ISO 80000-10:2009
    • BS EN ISO 80000-11:2013 Quantities and units. Characteristic numbers
      Implementation of European Standard EN ISO 80000-11 by amendment to BS ISO 80000-11:2008
    • BS EN ISO 80000-12:2013 Quantities and units. Solid state physics
      Implementation of European Standard EN ISO 80000-12 by amendment to BS ISO 80000-12:2009

    BS IMPLEMENTATIONS

    BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

    • BS ISO 128-15:2013 Technical product documentation (TPD). General principles of presentation. Presentation of shipbuilding drawings
    • BS ISO 129-4:2013 Technical product documentation (TPD). Indication of dimensions and tolerances. Dimensioning of shipbuilding drawings
    • BS ISO 404:2013 Steel and steel products. General technical delivery requirements
    • BS ISO 1004-1:2013 Information processing. Magnetic ink character recognition. Print specifications for E13B
    • BS ISO 1004-2:2013 Information processing. Magnetic ink character recognition. Print specifications for CMC7
    • BS ISO 1496-1:2013 Series 1 freight containers. Specification and testing. General cargo containers for general purposes
      Supersedes BS 3951-2.1:1991+A5:2006
    • BS ISO 2861:2013 Vacuum technology. Dimensions of clamped type quick-release couplings
    • BS ISO 2982-1:2013 Rolling bearings. Accessories. Dimensions for adapter sleeve assemblies and withdrawal sleeves
      Supersedes BS ISO 2982-1:1995
    • BS ISO 2982-2:2013 Rolling bearings. Accessories. Dimensions for locknuts and locking devices
      Supersedes BS ISO 2982-2:2001
    • BS ISO 3438:2013 Subland twist drills for holes prior to tapping screw threads
      Supersedes BS ISO 3438:2003
    • BS ISO 3560:2013 Road vehicles. Frontal fixed barrier or pole impact test procedure
    • BS ISO 5129:2001+A1:2013 Acoustics. Measurement of sound pressure levels in the interior of aircraft during flight
    • BS ISO 5609-1:2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Designation, styles, dimensions and calculation for corrections
      Supersedes BS ISO 6261:2011, and together with BS ISO 5609-2:2012, BS ISO 5609-3:2012, BS ISO 5609-4:2012, BS ISO 5609-5:2012 and BS ISO 5609-6:2012, it also supersedes BS 4193-18:1999, which is withdrawn
    • BS ISO 5609-2:2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style F
      Together with BS ISO 5609-1:2012, BS ISO 5609-3:2012, BS ISO 5609-4:2012, BS ISO 5609-5:2012 and BS ISO 5609-6:2012, it supersedes BS 4193-18:1999, which is withdrawn
    • BS ISO 5609-3:2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style K
      Together with BS ISO 5609-1:2012, BS ISO 5609-2:2012, BS ISO 5609-4:2012, BS ISO 5609-5:2012 and BS ISO 5609-6:2012, it supersedes BS 4193-18:1999, which is withdrawn
    • BS ISO 5609-4:2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style L
      Together with BS ISO 5609-1:2012, BS ISO 5609-2:2012, BS ISO 5609-3:2012, BS ISO 5609-5:2012 and BS ISO 5609-6:2012, it supersedes BS 4193-18:1999, which is withdrawn
    • BS ISO 5609-5:2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style U
      Together with BS ISO 5609-1:2012, BS ISO 5609-2:2012, BS ISO 5609-3:2012, BS ISO 5609-4:2012 and BS ISO 5609-6:2012, it supersedes BS 4193-18:1999, which is withdrawn
    • BS ISO 5609-6:2012 Tool holders for internal turning with cylindrical shank for indexable inserts. Style Q
      Together with BS ISO 5609-1:2012, BS ISO 5609-2:2012, BS ISO 5609-3:2012, BS ISO 5609-4:2012 and BS ISO 5609-5:2012, it supersedes BS 4193-18:1999, which is withdrawn
    • BS ISO 5700:2013 Tractors for agriculture and forestry. Roll-over protective structures. Static test method and acceptance conditions
      Supersedes BS ISO 5700:2006
    • BS ISO 5892:2013 Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
    • BS ISO 7539-11:2013 Corrosion of metals and alloys. Stress corrosion cracking. Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
    • BS ISO 8536-12:2007+A1:2013 Infusion equipment for medical use. Check valves
    • BS ISO 10008:2013 Quality management. Customer satisfaction. Guidelines for business-to-consumer electronic commerce transactions
    • BS ISO 10474:2013 Steel and steel products. Inspection documents
    • BS ISO 12110-1:2013 Metallic materials. Fatigue testing. Variable amplitude fatigue testing. General principles, test method and reporting requirements
    • BS ISO 12110-2:2013 Metallic materials. Fatigue testing. Variable amplitude fatigue testing. Cycle counting and related data reduction methods
    • BS ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods
    • BS ISO 13643-1:2013 Ships and marine technology. Manoeuvring of ships. General concepts, quantities and test conditions
    • BS ISO 13643-2:2013 Ships and marine technology. Manoeuvring of ships. Turning and yaw checking
    • BS ISO 13643-3:2013 Ships and marine technology. Manoeuvring of ships. Yaw stability and steering
    • BS ISO 13643-4:2013 Ships and marine technology. Manoeuvring of ships. Stopping, acceleration, traversing
    • BS ISO 13643-5:2013 Ships and marine technology. Manoeuvring of ships. Submarine specials
    • BS ISO 13643-6:2013 Ships and marine technology. Manoeuvring of ships. Model test specials
    • BS ISO 14544:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of compression properties
    • BS ISO/IEC 15504-6:2013 Information technology. Process assessment. An exemplar system life cycle process assessment model
      Supersedes PD ISO/IEC TR 15504-6:2008
    • BS ISO 15638-2:2013 Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Common platform parameters using CALM
    • BS ISO 15638-3:2013 Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Operating requirements, “Approval Authority” procedures, and enforcement provisions for the providers of regulated services
    • BS ISO 15638-5:2013 Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Generic vehicle information
    • BS ISO 15638-7:2013 Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Other applications
    • BS ISO 15739:2013 Photography. Electronic still-picture imaging. Noise measurements
      Supersedes BS ISO 15739:2003
    • BS ISO 15829:2013 Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
      Supersedes BS ISO 15829:2004
    • BS ISO 15887:2013 Space data and information transfer systems. Lossless data compression
      Supersedes BS Z 17:2000
    • BS ISO 16039:2004+A1:2013 Road construction and maintenance equipment. Slipform pavers. Definitions and commercial specifications
    • BS ISO 16191:2013 Water quality. Determination of the toxic effect of sediment on the growth behaviour of Myriophyllum aquaticum
    • BS ISO 16236:2013 Crop protection equipment. Test method for the determination of drainable volume and its concentration
    • BS ISO 17098:2013 Packaging material recycling. Report on substances and materials which may impede recycling
    • BS ISO 17807:2013 Space data and information transfer systems. Asynchronous message service
    • BS ISO 17854:2013 Space data and information transfer systems. Flexible advanced coding and modulation scheme for high rate telemetry applications
    • BS ISO 17949:2013 Impact test procedures for road vehicles. Seating and positioning procedures for anthropomorphic test devices. Procedure for the WorldSID 50th percentile male side-impact dummy in front outboard seating positions
    • BS ISO 18201:2013 Space data and information transfer systems. Mission operations reference model
    • BS ISO 18202:2013 Space data and information transfer systems. Mission operations message abstraction layer
    • BS ISO 18381:2013 Space data and information transfer systems. Lossless multispectral and hyperspectral image compression
    • BS ISO 18382:2013 Space data and information transfer systems. Spacecraft onboard interface services. RFIDbased inventory management systems
    • BS ISO 18423:2013 Space data and information transfer systems. Pseudo-Noise (PN) Ranging Systems
    • BS ISO 18424:2013 Space data and information transfer systems. XML Telemetric and Command Exchange (XTCE)
    • BS ISO 18425:2013 Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Packet Service
    • BS ISO 18426:2013 Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Memory Access Service
    • BS ISO 18427:2013 Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Synchronization Service
    • BS ISO 18428:2013 Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Device Discovery Service
    • BS ISO 18438:2013 Space data and information transfer systems. Spacecraft Onboard Interface Services. Subnetwork Test Service
    • BS ISO 18439:2013 Space data and information transfer systems. Space Communication Cross Support. Service Management. Service Specification
    • BS ISO 18440:2013 Space data and information transfer systems. Space Link Extension. Internet Protocol for Transfer Services
    • BS ISO 18441:2013 Space data and information transfer systems. Space Link Extension. Application Program Interface for Transfer Services. Core Specification
    • BS ISO 18442:2013 Space data and information transfer systems. Space Link Extension. Application Program Interface for Return All Frames Service
    • BS ISO 18443:2013 Space data and information transfer systems. Space Link Extension. Application Program Interface for Return Channel Frames Service
    • BS ISO 18444:2013 Space data and information transfer systems. Space Link Extension. Application Program Interface for Return Operational Control Fields Service
    • BS ISO 18445:2013 Space data and information transfer systems. Space Link Extension. Application Program Interface for the Forward CLTU Service
    • BS ISO 18446:2013 Space data and information transfer systems. Space Link Extension. Application Program Interface for the Forward Space Packet Service
    • BS ISO 18868:2013 Commercial road vehicles. Coupling equipment between vehicles in multiple vehicle combinations. Strength requirements
    • BS ISO 18902:2013 Imaging materials. Processed imaging materials. Albums, framing and storage materials
      Supersedes BS ISO 18902:2007
    • BS ISO 18947:2013 Imaging materials. Photographic reflection prints. Determination of abrasion resistance of photographic images
    • BS ISO 22664:2013 Space data and information transfer systems. TC (telecommand) space datalink protocol
      Supersedes BS ISO 22664:2005
    • BS ISO 22667:2013 Space data and information transfer systems. Communications operation procedure-1
      Supersedes BS ISO 22667:2005
    • BS ISO 22669:2013 Space data and information transfer systems. Space link extension (SLE). Return-all-frames service
      Supersedes BS ISO 22669:2007
    • BS ISO 22670:2013 Space data and information transfer systems. Space link extension (SLE). Return-channel frames service
      Supersedes BS ISO 22670:2006
    • BS ISO/IEC 24769-2:2013 Information technology. Real-time locating systems (RTLS) device conformance test methods. Test methods for air interface communication at 2,4 GHz
    • BS ISO 26143:2013 Space data and information transfer systems. Space link extension (SLE). Return operational control fields service
      Supersedes BS ISO 26143:2007
    • BS ISO 26842-1:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in nonsevere environments
      Supersedes BS ISO 26842-1:2009
    • BS ISO 26842-2:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in severe environments
      Supersedes BS ISO 26842-2:2009
    • BS ISO 27850:2013 Tractors for agriculture and forestry. Falling object protective structures. Test procedures and performance requirements
    • BS ISO/IEC 29142-1:2013 Information technology. Print cartridge characterization. General: terms, symbols, notations and cartridge characterization framework
    • BS ISO/IEC 29142-2:2013 Information technology. Print cartridge characterization. Cartridge characterization data reporting
    • BS ISO/IEC 29182-1:2013 Information technology. Sensor networks: Sensor Network Reference Architecture (SNRA). General overview and requirements
    • BS ISO/IEC 29182-2:2013 Information technology. Sensor networks: Sensor Network Reference Architecture (SNRA). Vocabulary and terminology
    • BS ISO/IEC 29192-4:2013 Information technology. Security techniques. Lightweight cryptography. Mechanisms using asymmetric techniques

    PUBLISHED DOCUMENTS

    • PD ISO/IEC GUIDE 37:2012Instructions for use of products by consumers
    • PD ISO/TR 10686:2013Hydraulic fluid power. Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system
    • PD ISO/TR 13097:2013Guidelines for the characterization of dispersion stability
    • PD ISO/TR 13184-1:2013Intelligent transport systems. Guidance protocol via personal ITS station for advisory safety systems. General information and use case definitions
    • PD ISO/IEC TS 13249-7:2013Information technology. Database languages. SQL multimedia and application packages. History
    • PD ISO/TS 14067:2013 Greenhouse gases. Carbon footprint of products. Requirements and guidelines for quantification and communication
    • PD ISO/TR 14806:2013 Intelligent transport systems. Public transport requirements for the use of payment applications for fare media
    • PD CEN/TS 14999:2013Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container
    • PD CEN/TR 15120:2013Tanks for transport of dangerous goods. Guidance and recommendations for loading, transport and unloading
      Supersedes PD CEN/TR 15120:2005
    • PD ISO/TR 16250:2013Road vehicles. Objective rating metrics for dynamic systems
    • PD CEN/TS 16450:2013Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
    • PD CEN/TS 16454:2013Intelligent transport systems. ESafety. ECall end to end conformance testing
    • PD CEN/TR 16470:2013 Environmental aspects of ductile iron pipe systems for water and sewerage applications
    • PD CEN/TR 16514:2013Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol
    • PD CEN/TS 16555-1:2013Innovation Management. Innovation Management System
    • PD CEN/TR 16569:2013 Automotive fuels. Assessing the effects of E10 petrol on vehicle emissions and performance
    • PD ISO/TR 16732-2:2012Fire Safety Engineering. Fire risk assessment. Example of an office building
    • PD ISO/TS 16976-8:2013Respiratory protective devices. Human factors. Ergonomic factors
    • PD ISO/TS 17379-1:2013 Water quality. Determination of selenium. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)
    • PD ISO/TS 17379-2:2013Water quality. Determination of selenium. Method using hydride generation atomic absorption spectrometry (HG-AAS)
      Supersedes BS 6068-2.45:1993
    • PD ISO/TS 17796:2013Rubber. Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
    • PD ISO/TS 17863:2013Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
    • PD ISO/TS 17931:2013 Intelligent transport systems. Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS
    • PD ISO/TR 22899-2:2013Determination of the resistance to jet fires of passive fire protection. Guidance on classification and implementation methods
    • PD ISO/TR 24971:2013Medical devices. Guidance on the application of ISO 14971
    • PD CLC/TS 50546:2013Railway applications. Rolling stock. 3-phase shore (external) supply system for rail vehicles
    • PD CLC/TS 62441:2012Safeguards against accidentally caused candle flame ignition for audio/video, communication and information technology equipment
      Supersedes DD CLC/TS 62441:2007
    • PD IEC/TR 62655:2013Tutorial and application guide for high-voltage fuses

    PUBLICLY AVAILABLE SPECIFICATIONS

    Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

    • PAS 7:2013 Fire risk management system. Specification
    • PAS 67:2013Laboratory tests to determine the heating and electrical performance of heat-led microcogeneration packages primarily intended for heating dwellings
      Supersedes PAS 67:2008
    • PAS 402:2013 Waste resource management. Specification for performance reporting
      Supersedes PAS 402:2009

    CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

    Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

    • BS 3247:2011Specification for salt for spreading on highways for winter maintenance
      CORRIGENDUM 1
    • BS 6093:2006+A1:2013Design of joints and jointing in building construction. Guide
      AMENDMENT 1
    • BS 6593:1985+A1:2009Code of practice for On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
      CORRIGENDUM 1
    • BS EN ISO 178:2010+A1:2013 Plastics. Determination of flexural properties
      AMENDMENT 1
    • BS EN ISO 180:2000+A2:2013Plastics. Determination of Izod impact strength
      AMENDMENT 2
    • BS EN ISO 294-5:2013Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
      CORRIGENDUM 1
    • BS EN ISO 307:2007+A1:2013Plastics. Polyamides. Determination of viscosity number
      AMENDMENT 1
    • BS EN 709:1997+A4:2009Agricultural and forestry machinery. Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s). Safety
      CORRIGENDUM 1
    • BS EN 716-1:2008+A1:2013Furniture. Children's cots and folding cots for domestic use. Safety requirements
      CORRIGENDUM 1
    • BS EN 998-2:2010Specification for mortar for masonry. Masonry mortar
      CORRIGENDUM 3
    • BS EN 1423:2012Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two
      CORRIGENDUM 1
    • BS EN 1627:2011Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification
      CORRIGENDUM 1
    • BS EN 1650:2008+A1:2013Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)
      AMENDMENT 1
    • BS EN 2398:2008 Aerospace series. Heat resisting steel FEPA2601( X6NiCrTiMoV26-15). Rm ? 900 MPa. Bars for machined bolts. D ? 25 mm
      CORRIGENDUM 2
    • BS EN ISO 3665:2013Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications
      CORRIGENDUM 1
    • BS EN ISO 4264:2007+A1:2013(BS 2000-380:2007+A1:2013) Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation
      AMENDMENT 1
    • BS EN ISO 5659-2:2012Plastics. Smoke generation. Determination of optical density by a single-chamber test
      CORRIGENDUM 1
    • BS EN ISO 8611-2:2012Pallets for materials handling. Flat pallets. Performance requirements and selection of tests
      CORRIGENDUM 1
    • BS EN ISO 9233-1:2013Cheese, cheese rind and processed cheese. Determination of natamycin content. Molecular absorption spectrometric method for cheese rind
      CORRIGENDUM 1
    • BS EN ISO 11269-2:2013Soil quality. Determination of the effects of pollutants on soil flora. Effects of contaminated soil on the emergence and early growth of higher plants
      CORRIGENDUM 1
    • BS EN ISO 11363-1:2010Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Specifications
      CORRIGENDUM 2
    • BS EN ISO 11664-3:2013Colorimetry. CIE tristimulus values
      CORRIGENDUM 1
    • BS EN ISO 12570:2000+A1:2013Hygrothermal performance of building materials and products. Determination of moisture content by drying at elevated temperature
      AMENDMENT 1
    • BS EN ISO 12779:2013Lactose. Determination of water content. Karl Fischer method
      CORRIGENDUM 1
    • BS EN ISO 12855:2012 Electronic fee collection. Information exchange between service provision and toll charging
      CORRIGENDUM 1
    • BS EN 13083:2008+A1:2013Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading
      AMENDMENT 1
    • BS EN ISO 13088:2012Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection
      CORRIGENDUM 1
    • BS EN ISO 13408-1:2011+A1:2013Aseptic processing of health care products. General requirements
      AMENDMENT 1
    • BS EN ISO 13408-6:2011+A1:2013Aseptic processing of health care products. Isolator systems
      AMENDMENT 1
    • BS EN 13752:2012Products used for treatment of water intended for human consumption. Manganese dioxide
      CORRIGENDUM 1
    • BS EN ISO 14906:2011 Electronic fee collection. Application interface definition for dedicated short-range communication
      CORRIGENDUM 1
    • BS EN 15037-4:2010+A1:2013Precast concrete products. Beam-and-block floor systems. Expanded polystyrene blocks
      AMENDMENT 1
    • BS EN 15085-1:2007+A1:2013Railway applications. Welding of railway vehicles and components. General
      AMENDMENT 1
    • BS EN ISO 15527:2013Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
      CORRIGENDUM 1
    • BS EN 15649-2:2009+A2:2013Floating leisure articles for use on and in the water. Consumer information
      AMENDMENT 2
    • BS EN 15997:2011All terrain vehicles (ATVs – Quads). Safety requirements and test methods
      CORRIGENDUM 1
    • BS EN 16237:2013Classification of non-electrical sources of incoherent optical radiation
      CORRIGENDUM 1
    • BS EN ISO 19712-1:2013Plastics. Decorative solid surfacing materials. Classification and specifications
      CORRIGENDUM 1
    • BS EN ISO 21569:2005+A1:2013 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Qualitative nucleic acid based methods
      AMENDMENT 1
    • BS EN ISO 21570:2005+A1:2013Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Quantitative nucleic acid based methods
      AMENDMENT 1
    • BS EN ISO 22155:2013Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
      CORRIGENDUM 1
    • BS EN ISO 23611-5:2013Soil quality. Sampling of soil invertebrates. Sampling and extraction of soil macroinvertebrates
      CORRIGENDUM 1
    • BS EN ISO 24276:2006+A1:2013Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
      AMENDMENT 1
    • BS EN 50163:2004+A1:2007Railway applications. Supply voltages of traction systems
      CORRIGENDUM 2
    • BS EN 50382-1:2008+A1:2013Railway applications. Railway rolling stock high temperature power cables having special fire performance. General requirements
      AMENDMENT 1
    • BS EN 50530:2010+A1:2013Overall efficiency of grid connected photovoltaic inverters
      AMENDMENT 1
    • BS EN 50548:2011+A1:2013Junction boxes for photovoltaic modules
      AMENDMENT 1
    • BS EN 55016-2-3:2010Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
      CORRIGENDUM 1
    • BS EN 55016-4-2:2011Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
      CORRIGENDUM 1
    • BS EN 60061-2:1993+A45:2012Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
      AMENDMENT 45
    • BS EN 60079-0:2012 Explosive atmospheres. Equipment. General requirements
      CORRIGENDUM 1
    • BS EN 60335-2-2:2010+A1:2013Household and similar electrical appliances. Safety. Particular requirements for vacuum cleaners and water-suction cleaning appliances
      AMENDMENT 1
    • BS EN 60335-2-7:2010+A1:2013Household and similar electrical appliances. Safety. Particular requirements for washing machines
      CORRIGENDUM 1
    • BS EN 60335-2-23:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
      CORRIGENDUM 4
    • BS EN 60436:2008+A11:2012(BS EN 50242:2008+A11:2012) Electric dishwashers for household use. Methods for measuring the performance
      AMENDMENT 2
    • BS EN 60601-1-8:2007+A1:2013Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
      AMENDMENT 1
    • BS EN 60601-2-44:2009+A1:2012Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
      AMENDMENT 1
    • BS EN 60745-2-3:2011+A2:2013Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders
      AMENDMENT 2
    • BS EN 60810:2003+A2:2013 Lamps for road vehicles. Performance requirements
      AMENDMENT 2
    • BS EN 60893-3-4:2004+A1:2012Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on phenolic resins
      AMENDMENT 1
    • BS EN 61157:2007+A1:2013 Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
      AMENDMENT 1
    • BS EN 61195:1999+A1:2013 Double-capped fluorescent lamps. Safety specifications
      AMENDMENT 1
    • BS EN 61300-2-46:2006Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat cyclic
      CORRIGENDUM 1
    • BS EN 61347-1:2008+A2:2013Lamp controlgear. General and safety requirements
      AMENDMENT 2
    • BS EN 61394:2011 Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
      CORRIGENDUM 1
    • BS EN 61936-1:2010Power installations exceeding 1 kV a.c. Common rules
      CORRIGENDUM 1
    • BS EN 62040-1:2008+A1:2013Uninterruptible power systems (UPS). General and safety requirements for UPS
      AMENDMENT 1
    • BS EN 62061:2005+A1:2013 Safety of machinery. Functional safety of safety related electrical, electronic and programmable electronic control systems
      AMENDMENT 1
    • BS EN 62075:2012Audio/video, information and communication technology equipment. Environmentally conscious design
      CORRIGENDUM 1
    • BS EN 62127-2:2007+A1:2013Ultrasonics. Hydrophones. Calibration for ultrasonic fields up to 40 MHz
      AMENDMENT 1
    • BS EN 62196-1:2012+A11:2013Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. General requirements
      AMENDMENT 11
    • BS EN 62196-2:2012+A11:2013Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
      AMENDMENT 11
    • BS EN 62227:2008+A1:2013Multimedia home server systems. Digital rights permission code
      AMENDMENT 1
    • BS EN 62271-102:2002+A2:2013High-voltage switchgear and controlgear. Alternating current disconnectors and earthing switches
      AMENDMENT 2
    • BS EN 62337:2012Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
      CORRIGENDUM 1
    • BS EN 140401-803:2007+A2:2013Detail specification: Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
      AMENDMENT 2
    • BS EN ISO 80000-3:2013Quantities and units. Space and time
      CORRIGENDUM 1
    • BS EN ISO 80000-4:2013Quantities and units. Mechanics
      CORRIGENDUM 1
    • BS EN ISO 80000-5:2013Quantities and units. Thermodynamics
      CORRIGENDUM 1
    • BS EN ISO 80000-9:2013+A1:2011Quantities and units. Physical chemistry and molecular physics
      CORRIGENDUM 1
    • BS EN ISO 80000-10:2013Quantities and units. Atomic and nuclear physics
      CORRIGENDUM 1
    • BS EN ISO 80000-11:2013Quantities and units. Characteristic numbers
      CORRIGENDUM 1
    • BS EN ISO 80000-12:2013Quantities and units. Solid state physics
      CORRIGENDUM 1
    • PD CEN ISO/TR 7250-2:2011+A1:2013Basic human body measurements for technological design. Statistical summaries of body measurements from national populations
      AMENDMENT 1
    • BS ISO/IEC 1539-1:2010Information technology. Programming languages. Fortran. Base language
      CORRIGENDUM 2
    • BS IEC 62646:2012Nuclear power plants. Control rooms. Computer based procedures
      CORRIGENDUM 1
    • BS ISO 10928:2009+A1:2013Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
      AMENDMENT 1
    • BS ISO 17372:2008+A1:2013Animal feeding stuffs. Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography
      AMENDMENT 1
    • BS ISO/IEC 19794-4:2011+A1:2013Information technology. Biometric data interchange formats. Finger image data
      AMENDMENT 1
    • BS ISO/IEC 19794-9:2011+A1:2013 Information technology. Biometric data interchange formats. Vascular image data
      AMENDMENT 1
    • BS ISO 20906:2009+A1:2013Acoustics. Unattended monitoring of aircraft sound in the vicinity of airports
      AMENDMENT 1
    • DD ISO/TS 16976-2:2010Respiratory protective devices. Human factors. Anthropometrics
      CORRIGENDUM 1
    • DD CEN ISO/TS 17575-1:2010Electronic fee collection. Application interface definition for autonomous systems. Charging
      CORRIGENDUM 1
    • PD IEC/TR 60919-1:2010+A1:2013Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Steady-state conditions
      AMENDMENT 1
    • BS 2A 110:1962+A4:2013Specification for Steel nuts (unified hexagons and unified threads) for shear bolts for aircraft
      AMENDMENT 4
    • PAS 67:2013 Laboratory tests to determine the heating and electrical performance of heat-led microcogeneration packages primarily intended for heating dwellings
      CORRIGENDUM 1

    BRITISH STANDARDS WITHDRAWN

    • BS 3951-2.1:1991+A5:2006(ISO 1496-1:1990+A5:2006) Freight containers. Specification and testing of series 1 freight containers. General cargo containers for general purposes
      Superseded by BS ISO 1496-1:2013
    • BS 4193-18:1999(ISO 5609:1998) Hardmetal insert tooling. Specification for dimensions of boring bars for indexable inserts
      Superseded by BS ISO 5609-1:2012, BS ISO 5609-2:2012, BS ISO 5609-3:2012, BS ISO 5609-:2012, BS ISO 5609-5:2012 and BS ISO 5609-6:2012
    • BS 6068-2.45:1993(ISO 9965:1993) Water quality. Physical, chemical and biochemical methods. Determination of selenium by atomic absorption spectrometry
      Superseded by PD ISO/TS 17379-2:2013
    • BS 7844-3:1998Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Determination of the power rating of a transformer loaded with non-sinusoidal current
      Superseded by BS EN 50541-2:2013
    • BS EN 462-1:1994Non-destructive testing. Image quality of radiographs. Image quality indicators (wire type). Determination of image quality value
      Superseded by BS EN ISO 19232-1:2013
    • BS EN 462-2:1994Non-destructive testing. Image quality of radiographs. Image quality indicators (step/hole type). Determination of image quality value
      Superseded by BS EN ISO 19232-2:2013
    • BS EN 462-3:1997 Non-destructive testing. Image quality of radiographs. Image quality classes for ferrous metals
      Superseded by BS EN ISO 19232-3:2013
    • BS EN 462-4:1995 Non-destructive testing. Image quality of radiographs. Experimental evaluation of image quality values and image quality tables
      Superseded by BS EN ISO 19232-4:2013
    • BS EN 462-5:1996Non-destructive testing. Image quality of radiographs. Image quality indicators (duplex wire type), determination of image unsharpness value
      Superseded by BS EN ISO 19232-5:2013
    • BS EN 571-1:1997Non-destructive testing. Penetrant testing. General principles
      Superseded by BS EN ISO 3452-1:2013
    • BS EN ISO 5659-1:1999 Plastics. Smoke generation. Guidance on optical-density testing
      Superseded by BS EN ISO 5659-2:2012
    • BS EN 13795:2011 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
      Superseded by BS EN 13795:2011+A1:2013
    • DD CEN/TS 15213-1:2005Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Reference architecture and terminology
      Superseded by BS EN 15213-1:2013
    • DD CEN/TS 15213-2:2006 Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Common status message elements
      Superseded by BS EN 15213-2:2013
    • DD CEN/TS 15213-3:2006Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for short range communication
      Superseded by BS EN 15213-3:2013
    • DD CEN/TS 15213-4:2006Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for long range communication
      Superseded by BS EN 15213-4:2013
    • DD CEN/TS 15213-5:2006 Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Messaging interface
      Superseded by BS EN 15213-5:2013
    • BS EN 60335-2-8:2003Specification for safety of household and similar electrical appliances. Particular requirements for shavers, hair clippers and similar appliances
      Superseded by BS EN 60335-2-8:2003+A2:2008
    • BS EN 60335-2-14:2006Household and similar electrical appliances. Safety. Particular requirements for kitchen machines
      Superseded by BS EN 60335-2-14:2006+A1:2008
    • BS EN 60335-2-15:2002Household and similar electrical appliances. Safety. Particular requirements for appliances for heating liquids
      Superseded by BS EN 60335-2-15:2002+A2:2008
    • BS EN 60335-2-43:2003Household and similar electrical appliances. Safety. Particular requirements for appliances for clothes dryers and towel rails
      Superseded by BS EN 60335-2-43:2003+A2:2008
    • BS EN 60335-2-60:2003Specification for safety of household and similar electrical appliances. Particular requirements for whirlpool baths and whirlpool spas
      Superseded by BS EN 60335-2-60:2003+A2:2008
    • BS EN 60335-2-60:2003+A2:2008Household and similar electrical appliances. Safety. Particular requirements for whirlpool baths and whirlpool spas
      Superseded by BS EN 60335-2-60:2003+A12:2010
    • BS EN 60335-2-61:2003Specification for safety of household and similar electrical appliances. Particular requirements for thermal-storage room heaters
      Superseded by BS EN 60335-2-61:2003+A2:2008
    • BS EN 60335-2-98:2003 Specification for safety of household and similar electrical appliances. Particular requirements for humidifiers
      Superseded by BS EN 60335-2-98:2003+A2:2008
    • BS ISO 6261:2011Tool holders with cylindrical shank (boring bars) for indexable inserts. Designation
      Superseded by BS ISO 5609-1:2012
    • PD ISO/IEC TR 15504-6:2008 Information technology. Process assessment. An exemplar system life cycle process assessment model
      Superseded by BS ISO/IEC 15504-6:2013
    • DD CLC/TS 50217:2005 Guide for in situ measurements. In situ measurement of disturbance emission
      Superseded by BS EN 55016-2-3:2010
    • DD IEC/TS 62239:2008Process management for avionics. Preparation of an electronic components management plan
      Superseded by PD IEC/TS 62239-1:2012
    • DD CLC/TS 62441:2007Accidentally caused candle flame ignition for audio/video, communication and information technology equipment
      Superseded by PD CLC/TS 62441:2012
    • BS Z 17:2000 (ISO 15887:2000) Space data and information transfer systems. Data systems. Lossless data compression
      Superseded by BS ISO 15887:2013
    • BS 2HR 650:2011Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)
      Superseded by BS EN 2398:2008
    ittee E35.15, ASTM BOS Volume 11.05.
  • E1142 Standard Terminology Relating to Thermophysical Properties has been revised to E1142-13 developed by Committee E37.03, ASTM BOS Volume 14.02.
  • E1169 Standard Practice for Conducting Ruggedness Tests has been revised to E1169-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E1170 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces has been reapproved, available as E1170-97(2012) developed by Committee E17.33, ASTM BOS Volume 04.03.
  • E1221 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels has been revised to E1221-12a developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter has been revised to E1354-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E1434 Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases has been reapproved, available as E1434-00(2013) developed by Committee D30.01, ASTM BOS Volume 15.03.
  • E1457 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals has been revised to E1457-13 developed by Committee E08.06, ASTM BOS Volume 03.01.
  • E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers has been reapproved, available as E1477-98a(2013) developed by Committee E12.02, ASTM BOS Volume 06.01.
  • E1517 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova has been revised to E1517-13 developed by Committee E35.12, ASTM BOS Volume 11.05.
  • E1537 Standard Test Method for Fire Testing of Upholstered Furniture has been revised to E1537-13 developed by Committee E05.15, ASTM BOS Volume 04.07.
  • E1554/E1554M Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization has been revised (with designation change) to E1554/E1554M-13 developed by Committee E06.41, ASTM BOS Volume 04.11.
  • E1590 Standard Test Method for Fire Testing of Mattresses has been revised to E1590-13 developed by Committee E05.15, ASTM BOS Volume 04.07.
  • E1591 Standard Guide for Obtaining Data for Fire Growth Models has been revised to E1591-13 developed by Committee E05.33, ASTM BOS Volume 04.07.
  • E1593 Standard Guide for Assessing the Efficacy of Air Care Products in Reducing the Perception of Indoor Malodor has been revised (with title change) to E1593-13 developed by Committee E18.07, ASTM BOS Volume 15.08.
  • E1600 Standard Test Method for Determination of Gold in Cyanide Solutions by Flame Atomic Absorption Spectrometry has been revised to E1600-13 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1822 Standard Test Method for Fire Testing of Stacked Chairs has been revised to E1822-13 developed by Committee E05.15, ASTM BOS Volume 04.07.
  • E1823 Standard Terminology Relating to Fatigue and Fracture Testing has been revised to E1823-13 developed by Committee E08.02, ASTM BOS Volume 03.01.
  • E1839 Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime has been revised to E1839-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E1849 Standard Guide for Fish and Wildlife Incident Monitoring and Reporting has been reapproved, available as E1849-96(2013) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E1867 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers has been revised to E1867-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E1993 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs has been revised (with designation change) to E1993/E1993M-98(2013)e1 developed by Committee E06.21, ASTM BOS Volume 04.11.
  • E2011 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand has been revised to E2011-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2102 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater has been revised to E2102-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E2103/E2103M Standard Classification for Bridge Elements—UNIFORMAT II has been revised (with designation change) to E2103/E2103M-13 developed by Committee E06.81, ASTM BOS Volume 04.11.
  • E2230 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material has been revised to E2230-13 developed by Committee E05.17, ASTM BOS Volume 04.07.
  • E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies has been revised to E2257-13 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact has been editorially changed, available as E2404-13e1 developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E2455 Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels has been reapproved, available as E2455-06(2013) developed by Committee E50.47, ASTM BOS Volume 11.06.
  • E2551 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers has been revised to E2551-13 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E2554 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques has been revised (with title change) to E2554-13 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E2579 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics has been revised to E2579-13 developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E2647 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow has been revised to E2647-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2772 Standard Specification for Evaluation and Selection of Accommodations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences has been editorially changed, available as E2772-13e1 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2810 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units has been editorially changed, available as E2810-11e1 developed by Committee E55.03, ASTM BOS Volume 14.02.
  • E2856 Standard Guide for Estimation of LNAPL Transmissivity has been revised to E2856-13 developed by Committee E50.04, ASTM BOS Volume 11.05.
  • E2870 Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling is a new standard, now available. E2870-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • F15 Standard Specification for Iron-Nickel-Cobalt Sealing Alloy has been reapproved, available as F15-04(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F37 Standard Test Methods for Sealability of Gasket Materials has been reapproved, available as F37-06(2013) developed by Committee F03.10, ASTM BOS Volume 09.02.
  • F73 Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps has been reapproved, available as F73-96(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F83 Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters has been reapproved, available as F83-71(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F85 Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes has been reapproved, available as F85-76(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F112 Standard Test Method for Sealability of Enveloped Gaskets has been reapproved, available as F112-00(2013) developed by Committee F03.10, ASTM BOS Volume 09.02.
  • F148 Standard Test Method for Binder Durability of Cork Composition Gasket Materials has been reapproved, available as F148-02(2013) developed by Committee F03.40, ASTM BOS Volume 09.02.
  • F204 Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire has been reapproved, available as F204-76(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F219 Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps has been reapproved, available as F219-96(2013) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F373 Standard Test Method for Embossed Depth of Resilient Floor Coverings has been revised to F373-13 developed by Committee F06.20, ASTM BOS Volume 15.04.
  • F406 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards has been revised to F406-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F430 Standard Specification for Paper Used for Vacuum Cleaner Filter Bags has been revised to F430-13 developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F467 Standard Specification for Nonferrous Nuts for General Use has been revised to F467-13 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F615M Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric) has been reapproved, available as F615M-95(2013) developed by Committee F01.11, ASTM BOS Volume 10.04.
  • F783 Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung has been reapproved, available as F783-88(2013) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact has been revised to F842-13 developed by Committee E06.51, ASTM BOS Volume 04.12.
  • F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing has been revised to F876-13 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F887 Standard Specifications for Personal Climbing Equipment has been revised to F887-13 developed by Committee F18.15, ASTM BOS Volume 10.03.
  • F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring has been revised to F925-13 developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F1011 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel has been reapproved, available as F1011-07(2013) developed by Committee F20.21, ASTM BOS Volume 11.05.
  • F1127 Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel has been reapproved, available as F1127-07(2013) developed by Committee F20.22, ASTM BOS Volume 11.05.
  • F1169 Standard Consumer Safety Specification for Full-Size Baby Cribs has been revised to F1169-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F1196 Standard Specification for Sliding Watertight Door Assemblies has been reapproved, available as F1196-00(2013) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F1244 Standard Specification for Berths, Marine has been reapproved, available as F1244-08(2013) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F1265 Standard Test Method for Resistance to Impact for Resilient Floor Tile has been reapproved, available as F1265-03a(2013) developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F1344 Standard Specification for Rubber Floor Tile has been editorially changed, available as F1344-12e1 developed by Committee F06.80, ASTM BOS Volume 15.04.
  • F1514 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change has been reapproved, available as F1514-03(2013) developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F1516 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended) has been revised to F1516-13 developed by Committee F06.40, ASTM BOS Volume 15.04.
  • F1524 Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills has been reapproved, available as F1524-95(2013) developed by Committee F20.22, ASTM BOS Volume 11.05.
  • F1564 Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers has been revised to F1564-13 developed by Committee F18.35, ASTM BOS Volume 10.03.
  • F1565 Standard Specification for Pressure-Reducing Valves for Steam Service has been reapproved, available as F1565-00(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1567 Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers has been reapproved, available as F1567-94(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1600 Standard Terminology Relating to Bioremediation has been reapproved, available as F1600-95(2013) developed by Committee F20.24, ASTM BOS Volume 11.05.
  • F1685 Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems has been reapproved, available as F1685-00(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1693 Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land has been reinstated, with revision to F1693-13 developed by Committee F20.13, ASTM BOS Volume 11.05.
  • F1718 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps has been reapproved, available as F1718-01(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1733 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing has been revised to F1733-13 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F1791 Standard Specification for Filters Used in Air or Nitrogen Systems has been reapproved, available as F1791-00(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1795 Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems has been reapproved, available as F1795-00(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing has been revised to F1807-13 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F1883 Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units has been reapproved, available as F1883-03(2013) developed by Committee F25.10, ASTM BOS Volume 01.07.
  • F1973 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems has been revised to F1973-13 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F1995 Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch has been revised (with title change) to F1995-13 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F2014 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications has been reapproved, available as F2014-00(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F2015 Standard Specification for Lap Joint Flange Pipe End Applications has been reapproved, available as F2015-00(2013) developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F2123 Standard Practice for Treestand Instructions has been revised to F2123-13 developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F2128 Standard Test Method for Treestand Repetitive Loading Capability has been revised to F2128-13 developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F2133 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel (Withdrawn 2013) has been withdrawn, with no replacement. F2133- developed by Committee F25.02, ASTM BOS Volume 01.07.
  • F2145 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing has been revised to F2145-13 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • Issue 52 – August 2013

    To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

    • A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels has been revised to A414/A414M-13 developed by Committee A01.19, ASTM BOS Volume 01.03.
    • A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes has been revised to A564/A564M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
    • A580/A580M Standard Specification for Stainless Steel Wire has been revised to A580/A580M-13a developed by Committee A01.17, ASTM BOS Volume 01.03.
    • A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip has been revised to A693-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
    • A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings has been revised to A705/A705M-13 developed by Committee A01.17, ASTM BOS Volume 01.03.
    • A712 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys has been reapproved, available as A712-07(2013) developed by Committee A06.01, ASTM BOS Volume 03.04.
    • A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service has been revised to A744/A744M-13 developed by Committee A01.18, ASTM BOS Volume 01.02.
    • A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) has been reapproved, available as A753-08(2013) developed by Committee A06.02, ASTM BOS Volume 03.04.
    • A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe has been revised to A790/A790M-13a developed by Committee A01.10, ASTM BOS Volume 01.01.
    • A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications has been revised to A798/A798M-13 developed by Committee A05.17, ASTM BOS Volume 01.06.
    • A838 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications has been reapproved, available as A838-02(2013) developed by Committee A06.02, ASTM BOS Volume 03.04.
    • A861 Standard Specification for High-Silicon Iron Pipe and Fittings has been reapproved, available as A861-04(2013) developed by Committee A04.12, ASTM BOS Volume 01.02.
    • A867 Standard Specification for Iron-Silicon Relay Steels has been reapproved, available as A867-03(2013) developed by Committee A06.02, ASTM BOS Volume 03.04.
    • A908 Standard Specification for Stainless Steel Needle Tubing has been reapproved, available as A908-03(2013) developed by Committee A01.10, ASTM BOS Volume 01.01.
    • A960/A960M Standard Specification for Common Requirements for Wrought Steel Piping Fittings has been revised to A960/A960M-13 developed by Committee A01.22, ASTM BOS Volume 01.01.
    • A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range has been revised to A962/A962M-13a developed by Committee A01.22, ASTM BOS Volume 01.01.
    • A977/A977M Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs has been reapproved, available as A977/A977M-07(2013) developed by Committee A06.01, ASTM BOS Volume 03.04.
    • A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys has been revised to A994-13 developed by Committee A01.91, ASTM BOS Volume 01.01.
    • B94 Standard Specification for Magnesium-Alloy Die Castings has been revised to B94-13 developed by Committee B07.04, ASTM BOS Volume 02.02.
    • B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate has been revised to B265-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers has been revised to B338-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications has been reinstated, with revision to B483/B483M-13 developed by Committee B07.03, ASTM BOS Volume 02.02.
    • B545 Standard Specification for Electrodeposited Coatings of Tin has been revised to B545-13 developed by Committee B08.06, ASTM BOS Volume 02.05.
    • B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys has been revised to B807/B807M-13 developed by Committee B07.03, ASTM BOS Volume 02.02.
    • B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection has been revised to B843-13 developed by Committee B07.04, ASTM BOS Volume 02.02.
    • B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe has been revised to B862-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B863 Standard Specification for Titanium and Titanium Alloy Wire has been revised to B863-13 developed by Committee B10.01, ASTM BOS Volume 02.04.
    • B864/B864M Standard Specification for Corrugated Aluminum Box Culverts has been revised to B864/B864M-13 developed by Committee B07.08, ASTM BOS Volume 02.02.
    • B953 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis has been revised to B953-13 developed by Committee B07.04, ASTM BOS Volume 02.02.
    • C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale) has been revised to C32-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C50/C50M Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products has been revised (with designation change) to C50/C50M-13 developed by Committee C07.06, ASTM BOS Volume 04.01.
    • C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) has been revised to C62-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C90 Standard Specification for Loadbearing Concrete Masonry Units has been revised to C90-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
    • C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units has been revised to C126-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) has been revised to C216-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement has been revised to C230/C230M-13 developed by Committee C01.22, ASTM BOS Volume 04.01.
    • C279 Standard Specification for Chemical-Resistant Masonry Units has been revised to C279-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C283 Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid has been revised to C283-13 developed by Committee B08.12, ASTM BOS Volume 02.05.
    • C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency has been revised to C305-13 developed by Committee C01.22, ASTM BOS Volume 04.01.
    • C410 Standard Specification for Industrial Floor Brick has been revised to C410-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction has been revised to C474-13 developed by Committee C11.02, ASTM BOS Volume 04.01.
    • C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form has been revised to C534/C534M-13 developed by Committee C16.22, ASTM BOS Volume 04.06.
    • C602 Standard Specification for Agricultural Liming Materials has been revised to C602-13 developed by Committee C07.02, ASTM BOS Volume 04.01.
    • C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) has been revised to C652-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C778 Standard Specification for Standard Sand has been revised to C778-13 developed by Committee C01.95, ASTM BOS Volume 04.01.
    • C859 Standard Terminology Relating to Nuclear Materials has been revised to C859-13 developed by Committee C26.01, ASTM BOS Volume 12.01.
    • C902 Standard Specification for Pedestrian and Light Traffic Paving Brick has been revised to C902-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals has been reapproved, available as C923-08(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
    • C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric) has been reapproved, available as C923M-08b(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
    • C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units has been revised to C936/C936M-13 developed by Committee C15.03, ASTM BOS Volume 04.05.
    • C980 Standard Specification for Industrial Chimney Lining Brick has been revised to C980-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units has been reapproved, available as C1006-07(2013) developed by Committee C15.04, ASTM BOS Volume 04.05.
    • C1019 Standard Test Method for Sampling and Testing Grout has been revised to C1019-13 developed by Committee C12.02, ASTM BOS Volume 04.05.
    • C1054 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens has been revised to C1054-13 developed by Committee C08.09, ASTM BOS Volume 15.01.
    • C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale has been revised to C1088-13 developed by Committee C15.02, ASTM BOS Volume 04.05.
    • C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) has been revised to C1107/C1107M-13 developed by Committee C09.43, ASTM BOS Volume 04.02.
    • C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation has been revised to C1126-13 developed by Committee C16.22, ASTM BOS Volume 04.06.
    • C1142 Standard Specification for Extended Life Mortar for Unit Masonry has been reapproved, available as C1142-95(2013) developed by Committee C12.03, ASTM BOS Volume 04.05.
    • C1298 Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys has been reapproved, available as C1298-95(2013) developed by Committee C15.05, ASTM BOS Volume 04.05.
    • C1344 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method has been reapproved, available as C1344-97(2013) developed by Committee C26.05, ASTM BOS Volume 12.01.
    • C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals has been reapproved, available as C1478-08(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
    • C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric) has been reapproved, available as C1478M-08a(2013) developed by Committee C13.06, ASTM BOS Volume 04.05.
    • C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete has been revised to C1758/C1758M-13 developed by Committee C09.47, ASTM BOS Volume 04.02.
    • C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete has been revised to C1761/C1761M-13 developed by Committee C09.21, ASTM BOS Volume 04.02.
    • C1780 Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer is a new standard, now available. C1780-13 developed by Committee C15.05, ASTM BOS Volume 04.05.
    • D8 Standard Terminology Relating to Materials for Roads and Pavements has been revised to D8-13a developed by Committee D04.91, ASTM BOS Volume 04.03.
    • D333 Standard Guide for Clear and Pigmented Lacquers has been reapproved, available as D333-01(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D396 Standard Specification for Fuel Oils has been revised to D396-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D451 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products has been reapproved (with editorial change), available as D451/D451M-91(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
    • D452 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products has been reapproved (with editorial change), available as D452/D452M-91(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
    • D476 Standard Classification for Dry Pigmentary Titanium Dioxide Products has been revised to D476-13 developed by Committee D01.31, ASTM BOS Volume 06.03.
    • D618 Standard Practice for Conditioning Plastics for Testing has been revised to D618-13 developed by Committee D20.50, ASTM BOS Volume 08.01.
    • D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact has been revised to D746-13 developed by Committee D20.30, ASTM BOS Volume 08.01.
    • D801 Standard Test Methods for Sampling and Testing Dipentene has been reapproved, available as D801-02(2013) developed by Committee D01.34, ASTM BOS Volume 06.03.
    • D802 Standard Test Methods for Sampling and Testing Pine Oils has been reapproved, available as D802-02(2013) developed by Committee D01.34, ASTM BOS Volume 06.03.
    • D889 Standard Test Method for Volatile Oil in Rosin has been revised to D889-13 developed by Committee D01.34, ASTM BOS Volume 06.03.
    • D892 Standard Test Method for Foaming Characteristics of Lubricating Oils has been revised to D892-13 developed by Committee D02.06, ASTM BOS Volume 05.01.
    • D904 Standard Practice for Exposure of Adhesive Specimens to Artificial Light has been reapproved, available as D904-99(2013) developed by Committee D14.40, ASTM BOS Volume 15.06.
    • D977 Standard Specification for Emulsified Asphalt has been revised to D977-13 developed by Committee D04.41, ASTM BOS Volume 04.03.
    • D1101 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use has been reapproved, available as D1101-97a(2013) developed by Committee D14.30, ASTM BOS Volume 15.06.
    • D1126 Standard Test Method for Hardness in Water has been revised to D1126-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
    • D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents has been revised to D1133-13 developed by Committee D01.35, ASTM BOS Volume 06.04.
    • D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load has been reapproved, available as D1143/D1143M-07(2013) developed by Committee D18.11, ASTM BOS Volume 04.08.
    • D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes has been reapproved, available as D1308-02(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D1435 Standard Practice for Outdoor Weathering of Plastics has been revised to D1435-13 developed by Committee D20.50, ASTM BOS Volume 08.01.
    • D1669/D1669M Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings has had a change in designation. The new designation is D1669/D1669M-07(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
    • D1734 Standard Practice for Making Cementitious Panels for Testing Coatings has been reapproved, available as D1734-93(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
    • D1795 Standard Test Method for Intrinsic Viscosity of Cellulose has been revised to D1795-13 developed by Committee D01.36, ASTM BOS Volume 06.03.
    • D1828 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures has been reapproved, available as D1828-01(2013) developed by Committee D14.40, ASTM BOS Volume 15.06.
    • D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy has been revised to D1976-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
    • D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions has been reapproved, available as D2067-97(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
    • D2074 Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method has been reapproved, available as D2074-07(2013) developed by Committee D01.33, ASTM BOS Volume 06.03.
    • D2178/D2178M Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing has been reinstated as D2178/D2178M-13 developed by Committee D08.04, ASTM BOS Volume 04.04.
    • D2199 Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers has been reapproved, available as D2199-03(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces has been revised to D2200-13 developed by Committee D01.46, ASTM BOS Volume 06.02.
    • D2338 Standard Test Method for Determining Particle Size of Multicolor Lacquers has been reapproved, available as D2338-02(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D2420 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method) has been revised to D2420-13 developed by Committee D02.H0, ASTM BOS Volume 05.01.
    • D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes has been revised to D2523-13 developed by Committee D08.20, ASTM BOS Volume 04.04.
    • D2813 Standard Practice for Sampling Leather for Physical and Chemical Tests has been reapproved, available as D2813-03(2013) developed by Committee D31.07, ASTM BOS Volume 15.04.
    • D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique has been revised to D2885-13 developed by Committee D02.01, ASTM BOS Volume 05.05.
    • D2967 Standard Test Method for Corner Coverage of Powder Coatings has been reapproved, available as D2967-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
    • D2976 Standard Test Method for pH of Peat Materials (Withdrawn 2013) has been withdrawn, with no replacement. D2976-71(2004) developed by Committee D18.22, ASTM BOS Volume 04.08.
    • D3147 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants has been reapproved, available as D3147-06(2013) developed by Committee D15.09, ASTM BOS Volume 15.05.
    • D3231 Standard Test Method for Phosphorus in Gasoline has been revised to D3231-13 developed by Committee D02.03, ASTM BOS Volume 05.01.
    • D3320 Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) (Withdrawn 2013) has been withdrawn, with no replacement. D3320-00(2004)e1 developed by Committee D08.09, ASTM BOS Volume 04.04.
    • D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction has been revised to D3381/D3381M-13 developed by Committee D04.40, ASTM BOS Volume 04.03.
    • D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers has been reapproved, available as D3404-91(2013) developed by Committee D18.21, ASTM BOS Volume 04.08.
    • D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing has been reapproved (with editorial change), available as D3468/D3468M-99(2013)e1 developed by Committee D08.18, ASTM BOS Volume 04.04.
    • D3585 Standard Specification for ASTM Reference Fluid for Coolant Tests has been reapproved, available as D3585-08(2013) developed by Committee D15.01, ASTM BOS Volume 15.05.
    • D3689/D3689M Standard Test Methods for Deep Foundations Under Static Axial Tensile Load has been reapproved (with editorial change), available as D3689/D3689M-07(2013)e1 developed by Committee D18.11, ASTM BOS Volume 04.08.
    • D3699 Standard Specification for Kerosine has been revised to D3699-13a developed by Committee D02.E0, ASTM BOS Volume 05.01.
    • D3808 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion has been reapproved, available as D3808-01(2013) developed by Committee D14.40, ASTM BOS Volume 15.06.
    • D3876 Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography has been reapproved, available as D3876-96(2013) developed by Committee D01.36, ASTM BOS Volume 06.03.
    • D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load has been reapproved (with editorial change), available as D3966/D3966M-07(2013)e1 developed by Committee D18.11, ASTM BOS Volume 04.08.
    • D4066 Standard Classification System for Nylon Injection and Extrusion Materials (PA) has been reinstated as D4066-13 developed by Committee D20.15, ASTM BOS Volume 08.02.
    • D4085 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry has been reapproved, available as D4085-93(2013) developed by Committee D01.36, ASTM BOS Volume 06.03.
    • D4107 Standard Test Method for Tritium in Drinking Water has been reapproved, available as D4107-08(2013) developed by Committee D19.04, ASTM BOS Volume 11.02.
    • D4147 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar has been reapproved, available as D4147-99(2013) developed by Committee D01.53, ASTM BOS Volume 06.02.
    • D4217 Standard Test Method for Gel Time of Thermosetting Coating Powder has been reapproved, available as D4217-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
    • D4242 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders has been reapproved, available as D4242-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
    • D4249 Standard Test Method for Enumeration of Candida albicans in Water (Withdrawn 2013) has been withdrawn, with no replacement. D4249-83(2005) developed by Committee D19.24, ASTM BOS Volume 11.02.
    • D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination has been revised to D4306-13 developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
    • D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter has been revised to D4308-13 developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
    • D4309 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water has been revised to D4309-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
    • D4496 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials has been reinstated as D4496-13 developed by Committee D09.12, ASTM BOS Volume 10.02.
    • D4562 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen has been reapproved, available as D4562-01(2013) developed by Committee D14.60, ASTM BOS Volume 15.06.
    • D4564 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method (Withdrawn 2013) has been withdrawn, with no replacement. D4564-08e1 developed by Committee D18.08, ASTM BOS Volume 04.08.
    • D4682 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants has been revised to D4682-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
    • D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application has been reapproved, available as D4707-09(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
    • D4731 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable has been revised to D4731-13 developed by Committee D09.18, ASTM BOS Volume 10.02.
    • D4799 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) has been reapproved (with editorial change), available as D4799/D4799M-08(2013)e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
    • D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel has been revised to D4806-13a developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
    • D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-13a developed by Committee D02.A0.01, ASTM BOS Volume 05.02.
    • D4858 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines has been revised to D4858-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
    • D4859 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC has been revised to D4859-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
    • D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating) has been revised to D4860-13 developed by Committee D02.14, ASTM BOS Volume 05.02.
    • D4863 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants has been revised to D4863-13 developed by Committee D02.B0.06, ASTM BOS Volume 05.02.
    • D4938 Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water has been reapproved, available as D4938-89(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
    • D4939 Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater has been reapproved, available as D4939-89(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
    • D5068 Standard Practice for Preparation of Paint Brushes for Evaluation has been reapproved, available as D5068-04(2013) developed by Committee D01.61, ASTM BOS Volume 06.02.
    • D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments has been reapproved, available as D5095-91(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
    • D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone has been reapproved, available as D5107-03(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
    • D5136 Standard Specification for High Purity p-Xylene has been reapproved, available as D5136-09(2013) developed by Committee D16.01, ASTM BOS Volume 06.04.
    • D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller has been reapproved, available as D5150-92(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
    • D5227 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins has been revised to D5227-13 developed by Committee D20.70, ASTM BOS Volume 08.03.
    • D5266 Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints has been revised to D5266-13 developed by Committee D14.30, ASTM BOS Volume 15.06.
    • D5309 Standard Specification for Cyclohexane 999 has been reapproved (with editorial change), available as D5309-08(2013)e1 developed by Committee D16.01, ASTM BOS Volume 06.04.
    • D5326 Standard Test Method for Color Development in Tinted Latex Paints has been reapproved, available as D5326-94a(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
    • D5327 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions has been reapproved, available as D5327-97(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D5382 Standard Guide to Evaluation of Optical Properties of Powder Coatings has been reapproved, available as D5382-02(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
    • D5395 Standard Specification for Reclaimed Methylene Chloride has been reapproved, available as D5395-03(2013) developed by Committee D26.02, ASTM BOS Volume 15.05.
    • D5403 Standard Test Methods for Volatile Content of Radiation Curable Materials has been reapproved, available as D5403-93(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D5456 Standard Specification for Evaluation of Structural Composite Lumber Products has been revised to D5456-13 developed by Committee D07.02, ASTM BOS Volume 04.10.
    • D5479 Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed has been reapproved, available as D5479-94(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
    • D5499 Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems has been reapproved, available as D5499-94(2013) developed by Committee D33.09, ASTM BOS Volume 06.02.
    • D5501 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography has been editorially changed, available as D5501-12e1 developed by Committee D02.04.0L, ASTM BOS Volume 05.02.
    • D5548 Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings) has been revised to D5548-13 developed by Committee D12.25, ASTM BOS Volume 15.04.
    • D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock has been reapproved, available as D5606-09(2013) developed by Committee D16.01, ASTM BOS Volume 06.04.
    • D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry has been reapproved, available as D5703-95(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
    • D5710/D5710M Standard Specification for Trinidad Lake Modified Asphalt has been revised (with designation change) to D5710/D5710M-13 developed by Committee D04.40, ASTM BOS Volume 04.03.
    • D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013) has been withdrawn, with no replacement. D5730-04 developed by Committee D18.01, ASTM BOS Volume 04.08.
    • D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines has been revised to D5797-13 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
    • D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines has been revised to D5798-13a developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
    • D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens has been reapproved, available as D5860-95(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
    • D5861 Standard Guide for Significance of Particle Size Measurements of Coating Powders has been reapproved, available as D5861-07(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
    • D5912 Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) (Withdrawn 2013) has been withdrawn, with no replacement. D5912-96(2004) developed by Committee D18.21, ASTM BOS Volume 04.09.
    • D5965 Standard Test Methods for Specific Gravity of Coating Powders has been reapproved, available as D5965-02(2013) developed by Committee D01.51, ASTM BOS Volume 06.02.
    • D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel has been revised to D5983-13 developed by Committee D02.A0.02, ASTM BOS Volume 05.02.
    • D6073 Standard Test Method for Relative Setting of Heatset Printing Inks has been reapproved, available as D6073-08a(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
    • D6076 Standard Test Method for Shrinkage Temperature of Leather has been reapproved, available as D6076-08(2013) developed by Committee D31.07, ASTM BOS Volume 15.04.
    • D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes has been revised to D6108-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products has been revised to D6109-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D6111 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement has been revised to D6111-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D6112 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes has been revised to D6112-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D6117 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes has been revised to D6117-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings has been reapproved, available as D6279-03(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D6316 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke has been editorially changed, available as D6316-09be1 developed by Committee D05.29, ASTM BOS Volume 05.06.
    • D6341 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) has been revised to D6341-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D6373 Standard Specification for Performance Graded Asphalt Binder has been revised to D6373-13 developed by Committee D04.40, ASTM BOS Volume 04.03.
    • D6488 Standard Terminology Relating to Print Problems has been reapproved, available as D6488-08(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
    • D6574/D6574M Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow has been revised (with designation change) to D6574/D6574M-13 developed by Committee D35.03, ASTM BOS Volume 04.13.
    • D6604 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry has been reapproved, available as D6604-00(2013) developed by Committee D01.34, ASTM BOS Volume 06.03.
    • D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards has been revised to D6662-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D6687 Standard Guide for Testing Printing Ink Vehicles and Components Thereof has been reapproved, available as D6687-07(2013) developed by Committee D01.37, ASTM BOS Volume 06.03.
    • D6849 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods has been revised to D6849-13 developed by Committee D02.08, ASTM BOS Volume 05.03.
    • D6887 Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions has been reapproved, available as D6887-03(2013) developed by Committee D01.37, ASTM BOS Volume 06.03.
    • D6903 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water has been reapproved, available as D6903-07(2013) developed by Committee D01.45, ASTM BOS Volume 06.02.
    • D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry has been reapproved, available as D6904-03(2013) developed by Committee D01.47, ASTM BOS Volume 06.02.
    • D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test) has been revised to D6933-13 developed by Committee D04.42, ASTM BOS Volume 04.03.
    • D6947/D6947M Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System has had a change in designation. The new designation is D6947/D6947M-07(2013)e1 developed by Committee D08.06, ASTM BOS Volume 04.04.
    • D6989 Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions has been reapproved, available as D6989-03(2013) developed by Committee D01.37, ASTM BOS Volume 06.03.
    • D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings has been reapproved, available as D7072-04(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
    • D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions has been revised to D7101-13 developed by Committee D18.25, ASTM BOS Volume 04.09.
    • D7180/D7180M Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects has had a change in designation. The new designation is D7180/D7180M-05(2013)e1 developed by Committee D35.03, ASTM BOS Volume 04.13.
    • D7225 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors has been revised to D7225-13 developed by Committee D12.16, ASTM BOS Volume 15.04.
    • D7230 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates has been reapproved, available as D7230-06(2013) developed by Committee D33.02, ASTM BOS Volume 06.02.
    • D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications has been revised to D7239-13 developed by Committee D35.03, ASTM BOS Volume 04.13.
    • D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings has been reapproved, available as D7270-07(2013) developed by Committee D01.55, ASTM BOS Volume 06.02.
    • D7305 Standard Test Method for Reflection Density of Printed Matter has been reapproved, available as D7305-08a(2013) developed by Committee D01.56, ASTM BOS Volume 06.02.
    • D7306 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation has been reapproved, available as D7306-07(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
    • D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions has been revised to D7322-13 developed by Committee D18.25, ASTM BOS Volume 04.09.
    • D7430 Standard Practice for Mechanical Sampling of Coal has been revised to D7430-13 developed by Committee D05.23, ASTM BOS Volume 05.06.
    • D7437 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants has been reapproved, available as D7437-08(2013) developed by Committee D15.06, ASTM BOS Volume 15.05.
    • D7476 Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins has been reapproved, available as D7476-08(2013) developed by Committee D31.02, ASTM BOS Volume 15.04.
    • D7477 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water has been reapproved, available as D7477-08(2013) developed by Committee D31.02, ASTM BOS Volume 15.04.
    • D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer has been revised to D7483-13a developed by Committee D02.07, ASTM BOS Volume 05.04.
    • D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions has been reapproved, available as D7489-09(2013) developed by Committee D01.42, ASTM BOS Volume 06.02.
    • D7557/D7557M Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens has been reapproved (with editorial change), available as D7557/D7557M-09(2013)e1 developed by Committee D35.03, ASTM BOS Volume 04.13.
    • D7568 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications has been revised to D7568-13 developed by Committee D20.20, ASTM BOS Volume 08.03.
    • D7834 Standard Test Method for Filling Material Shedding of Paint Brushes has been revised to D7834-13 developed by Committee D01.61, ASTM BOS Volume 06.02.
    • D7865 Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels is a new standard, now available. D7865-13 developed by Committee D35.10, ASTM BOS Volume 04.13.
    • D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings is a new standard, now available. D7869-13 developed by Committee D01.27, ASTM BOS Volume 06.01.
    • D7870/D7870M Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure is a new standard, now available. D7870/D7870M-13 developed by Committee D04.22, ASTM BOS Volume 04.03.
    • D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number) is a new standard, now available. D7871-13 developed by Committee D16.01, ASTM BOS Volume 06.04.
    • E1 Standard Specification for ASTM?Liquid-in-Glass Thermometers has been revised to E1-13 developed by Committee E20.05, ASTM BOS Volume 14.03.
    • E84 Standard Test Method for Surface Burning Characteristics of Building Materials has been revised to E84-13a developed by Committee E05.22, ASTM BOS Volume 04.07.
    • E164 Standard Practice for Contact Ultrasonic Testing of Weldments has been revised to E164-13 developed by Committee E07.06, ASTM BOS Volume 03.03.
    • E192 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications has been revised to E192-13 developed by Committee E07.02, ASTM BOS Volume 03.03.
    • E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves has been revised to E305-13 developed by Committee E01.20, ASTM BOS Volume 03.05.
    • E344 - Terminology Relating to Thermometry and Hydrometry has been revised to E344-13 developed by Committee E20.91, ASTM BOS Volume 14.03.
    • E449 Standard Test Methods for Analysis of Calcium Chloride has been reapproved, available as E449-08(2013) developed by Committee E15.02, ASTM BOS Volume 15.05.
    • E574 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation has been revised to E574-13 developed by Committee E20.04, ASTM BOS Volume 14.03.
    • E907 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013) has been withdrawn, with no replacement. E907-96(2004) developed by Committee D08.20, ASTM BOS Volume 04.04.
    • E1316 Standard Terminology for Nondestructive Examinations has been revised to E1316-13c developed by Committee E07.92, ASTM BOS Volume 03.03.
    • E1417/E1417M Standard Practice for Liquid Penetrant Testing has been revised to E1417/E1417M-13 developed by Committee E07.03, ASTM BOS Volume 03.03.
    • E1475 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data has been revised to E1475-13 developed by Committee E07.11, ASTM BOS Volume 03.03.
    • E1549/E1549M Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations has been revised (with designation change) to E1549/E1549M-13 developed by Committee E21.05, ASTM BOS Volume 15.03.
    • E1857 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces has been editorially changed, available as E1857-97(2013)e1 developed by Committee E06.24, ASTM BOS Volume 04.11.
    • E2135 Standard Terminology for Property and Asset Management has been editorially changed, available as E2135-10ae1 developed by Committee E53.06, ASTM BOS Volume 04.12.
    • E2350 Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems has been reapproved, available as E2350-07(2013) developed by Committee E34.85, ASTM BOS Volume 11.03.
    • E2361 Standard Guide for Testing Leave-On Products Using In-Situ Methods has been revised to E2361-13 developed by Committee E35.15, ASTM BOS Volume 11.05.
    • E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry has been revised to E2465-13 developed by Committee E01.08, ASTM BOS Volume 03.05.
    • E2630 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source has been reapproved, available as E2630-08(2013) developed by Committee E12.05, ASTM BOS Volume 06.01.
    • E2766 Standard Practice for Installation of Roof Mounted Photovoltaic Arrays on Steep-Slope Roofs is a new standard, now available. E2766-13 developed by Committee E44.09, ASTM BOS Volume 12.02.
    • E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion has been revised to E2792-13 developed by Committee E01.04, ASTM BOS Volume 03.05.
    • E2820 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors has been revised to E2820-13 developed by Committee E20.04, ASTM BOS Volume 14.03.
    • E2876 Standard Guide for Integrating Sustainable Objectives into Cleanup is a new standard, now available. E2876-13 developed by Committee E50.04, ASTM BOS Volume 11.05.
    • E2912 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction is a new standard, now available. E2912-13 developed by Committee E05.11, ASTM BOS Volume 04.07.
    • E2928/E2928M Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique is a new standard, now available. E2928/E2928M-13 developed by Committee E07.07, ASTM BOS Volume 03.03.
    • E2933 Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications is a new standard, now available. E2933-13 developed by Committee E54.01, ASTM BOS Volume 15.08.
    • F17 Standard Terminology Relating to Flexible Barrier Packaging has been revised to F17-13 developed by Committee F02.50, ASTM BOS Volume 15.10.
    • F34 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials has been revised to F34-13 developed by Committee F02.15, ASTM BOS Volume 15.10.
    • F86 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants has been revised to F86-13 developed by Committee F04.12, ASTM BOS Volume 13.01.
    • F150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring has been reapproved, available as F150-06(2013) developed by Committee F06.20, ASTM BOS Volume 15.04.
    • F307 Standard Practice for Sampling Pressurized Gas for Gas Analysis has been revised to F307-13 developed by Committee E21.05, ASTM BOS Volume 15.03.
    • F331 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator) has been revised to F331-13 developed by Committee E21.05, ASTM BOS Volume 15.03.
    • F381 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines has been revised to F381-13 developed by Committee F08.17, ASTM BOS Volume 15.07.
    • F432 Standard Specification for Roof and Rock Bolts and Accessories has been revised to F432-13 developed by Committee F16.02, ASTM BOS Volume 01.08.
    • F538 Standard Terminology Relating to the Characteristics and Performance of Tires has been revised to F538-13 developed by Committee F09.94, ASTM BOS Volume 09.02.
    • F543 Standard Specification and Test Methods for Metallic Medical Bone Screws has been revised to F543-13 developed by Committee F04.21, ASTM BOS Volume 13.01.
    • F720 Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test has been revised to F720-13 developed by Committee F04.16, ASTM BOS Volume 13.01.
    • F1000 Standard Practice for Piping System Drawing Symbols has been reinstated as F1000-13 developed by Committee F25.11, ASTM BOS Volume 01.07.
    • F1140/F1140M Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages has been revised (with designation change) to F1140/F1140M-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
    • F1700 Standard Specification for Solid Vinyl Floor Tile has been revised to F1700-13a developed by Committee F06.80, ASTM BOS Volume 15.04.
    • F1731 Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing has been reapproved, available as F1731-96(2013) developed by Committee F23.60, ASTM BOS Volume 11.03.
    • F1821 Standard Consumer Safety Specification for Toddler Beds has been revised to F1821-13 developed by Committee F15.18, ASTM BOS Volume 15.11.
    • F1827 Standard Terminology Relating to Food Service Equipment has been revised to F1827-13 developed by Committee F26.91, ASTM BOS Volume 15.12.
    • F2054/F2054M Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates has been revised (with designation change) to F2054/F2054M-13 developed by Committee F02.20, ASTM BOS Volume 15.10.
    • F2219 Standard Test Methods for Measuring High-Speed Bat Performance has been revised to F2219-13 developed by Committee F08.26, ASTM BOS Volume 15.07.
    • F2225 Standard Safety Specification for Consumer Trampoline Enclosures has been revised to F2225-13 developed by Committee F08.17, ASTM BOS Volume 15.07.
    • F2407 Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities has been reapproved (with editorial change), available as F2407-06(2013)e1 developed by Committee F23.40, ASTM BOS Volume 11.03.
    • F2503 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment has been revised to F2503-13 developed by Committee F04.15, ASTM BOS Volume 13.02.
    • F2547 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment has been reapproved, available as F2547-06(2013) developed by Committee F23.70, ASTM BOS Volume 11.03.
    • F2675/F2675M Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection is a new standard, now available. F2675/F2675M-13 developed by Committee F18.65, ASTM BOS Volume 10.03.
    • F2700 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating has been reapproved, available as F2700-08(2013) developed by Committee F23.80, ASTM BOS Volume 11.03.
    • F2703 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction has been reapproved, available as F2703-08(2013) developed by Committee F23.80, ASTM BOS Volume 11.03.
    • F2929 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig is a new standard, now available. F2929-13 developed by Committee F17.26, ASTM BOS Volume 08.04.
    • F3010 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings is a new standard, now available. F3010-13 developed by Committee F06.40, ASTM BOS Volume 15.04.
    • G6 Standard Test Method for Abrasion Resistance of Pipeline Coatings has been reapproved, available as G6-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G7/G7M Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials has been revised to G7/G7M-13 developed by Committee G03.02, ASTM BOS Volume 14.04.
    • G9 Standard Test Method for Water Penetration into Pipeline Coatings has been reapproved (with editorial change), available as G9-07(2013)e1 developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel has been reapproved, available as G12-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) has been reapproved, available as G17-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines has been reapproved, available as G18-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G24 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass has been revised to G24-13 developed by Committee G03.02, ASTM BOS Volume 14.04.
    • G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens has been reapproved, available as G38-01(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
    • G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment has been reapproved, available as G41-90(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
    • G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution has been reapproved, available as G44-99(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
    • G46 Standard Guide for Examination and Evaluation of Pitting Corrosion has been reapproved, available as G46-94(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials has been reapproved, available as G55-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G60 Standard Practice for Conducting Cyclic Humidity Exposures has been reapproved, available as G60-01(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G62 Standard Test Methods for Holiday Detection in Pipeline Coatings has been reapproved, available as G62-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys has been reapproved, available as G64-99(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
    • G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) has been reapproved, available as G66-99(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets has been revised to G76-13 developed by Committee G02.10, ASTM BOS Volume 03.02.
    • G87 Standard Practice for Conducting Moist SO2 Tests has been reapproved, available as G87-02(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) has been reapproved, available as G95-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
    • G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications has been reapproved, available as G97-97(2013) developed by Committee G01.10, ASTM BOS Volume 03.02.
    • G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments has been reapproved, available as G109-07(2013) developed by Committee G01.14, ASTM BOS Volume 03.02.
    • G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both has been reapproved, available as G111-97(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking has been reapproved, available as G129-00(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
    • G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals has been reapproved, available as G135-95(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service has been reapproved, available as G146-01(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G157 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries has been reapproved, available as G157-98(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G161 Standard Guide for Corrosion-Related Failure Analysis has been reapproved, available as G161-00(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
    • G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens has been reapproved, available as G168-00(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
    phs. Image quality indicators (wire type). Determination of image quality value

    Superseded by BS EN ISO 19232-1:2013
  • BS EN 462-2:1994Non-destructive testing. Image quality of radiographs. Image quality indicators (step/hole type). Determination of image quality value
    Superseded by BS EN ISO 19232-2:2013
  • BS EN 462-3:1997 Non-destructive testing. Image quality of radiographs. Image quality classes for ferrous metals
    Superseded by BS EN ISO 19232-3:2013
  • BS EN 462-4:1995 Non-destructive testing. Image quality of radiographs. Experimental evaluation of image quality values and image quality tables
    Superseded by BS EN ISO 19232-4:2013
  • BS EN 462-5:1996Non-destructive testing. Image quality of radiographs. Image quality indicators (duplex wire type), determination of image unsharpness value
    Superseded by BS EN ISO 19232-5:2013
  • BS EN 571-1:1997Non-destructive testing. Penetrant testing. General principles
    Superseded by BS EN ISO 3452-1:2013
  • BS EN ISO 5659-1:1999 Plastics. Smoke generation. Guidance on optical-density testing
    Superseded by BS EN ISO 5659-2:2012
  • BS EN 13795:2011 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment. General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels
    Superseded by BS EN 13795:2011+A1:2013
  • DD CEN/TS 15213-1:2005Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Reference architecture and terminology
    Superseded by BS EN 15213-1:2013
  • DD CEN/TS 15213-2:2006 Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Common status message elements
    Superseded by BS EN 15213-2:2013
  • DD CEN/TS 15213-3:2006Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for short range communication
    Superseded by BS EN 15213-3:2013
  • DD CEN/TS 15213-4:2006Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Interface and system requirements for long range communication
    Superseded by BS EN 15213-4:2013
  • DD CEN/TS 15213-5:2006 Road transport and traffic telematics. After-theft systems for the recovery of stolen vehicles. Messaging interface
    Superseded by BS EN 15213-5:2013
  • BS EN 60335-2-8:2003Specification for safety of household and similar electrical appliances. Particular requirements for shavers, hair clippers and similar appliances
    Superseded by BS EN 60335-2-8:2003+A2:2008
  • BS EN 60335-2-14:2006Household and similar electrical appliances. Safety. Particular requirements for kitchen machines
    Superseded by BS EN 60335-2-14:2006+A1:2008
  • BS EN 60335-2-15:2002Household and similar electrical appliances. Safety. Particular requirements for appliances for heating liquids
    Superseded by BS EN 60335-2-15:2002+A2:2008
  • BS EN 60335-2-43:2003Household and similar electrical appliances. Safety. Particular requirements for appliances for clothes dryers and towel rails
    Superseded by BS EN 60335-2-43:2003+A2:2008
  • BS EN 60335-2-60:2003Specification for safety of household and similar electrical appliances. Particular requirements for whirlpool baths and whirlpool spas
    Superseded by BS EN 60335-2-60:2003+A2:2008
  • BS EN 60335-2-60:2003+A2:2008Household and similar electrical appliances. Safety. Particular requirements for whirlpool baths and whirlpool spas
    Superseded by BS EN 60335-2-60:2003+A12:2010
  • BS EN 60335-2-61:2003Specification for safety of household and similar electrical appliances. Particular requirements for thermal-storage room heaters
    Superseded by BS EN 60335-2-61:2003+A2:2008
  • BS EN 60335-2-98:2003 Specification for safety of household and similar electrical appliances. Particular requirements for humidifiers
    Superseded by BS EN 60335-2-98:2003+A2:2008
  • BS ISO 6261:2011Tool holders with cylindrical shank (boring bars) for indexable inserts. Designation
    Superseded by BS ISO 5609-1:2012
  • PD ISO/IEC TR 15504-6:2008 Information technology. Process assessment. An exemplar system life cycle process assessment model
    Superseded by BS ISO/IEC 15504-6:2013
  • DD CLC/TS 50217:2005 Guide for in situ measurements. In situ measurement of disturbance emission
    Superseded by BS EN 55016-2-3:2010
  • DD IEC/TS 62239:2008Process management for avionics. Preparation of an electronic components management plan
    Superseded by PD IEC/TS 62239-1:2012
  • DD CLC/TS 62441:2007Accidentally caused candle flame ignition for audio/video, communication and information technology equipment
    Superseded by PD CLC/TS 62441:2012
  • BS Z 17:2000 (ISO 15887:2000) Space data and information transfer systems. Data systems. Lossless data compression
    Superseded by BS ISO 15887:2013
  • BS 2HR 650:2011Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)
    Superseded by BS EN 2398:2008
tate Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction has been reapproved, available as F2703-08(2013) developed by Committee F23.80, ASTM BOS Volume 11.03.
  • F2929 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig is a new standard, now available. F2929-13 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F3010 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings is a new standard, now available. F3010-13 developed by Committee F06.40, ASTM BOS Volume 15.04.
  • G6 Standard Test Method for Abrasion Resistance of Pipeline Coatings has been reapproved, available as G6-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G7/G7M Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials has been revised to G7/G7M-13 developed by Committee G03.02, ASTM BOS Volume 14.04.
  • G9 Standard Test Method for Water Penetration into Pipeline Coatings has been reapproved (with editorial change), available as G9-07(2013)e1 developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel has been reapproved, available as G12-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G17 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod) has been reapproved, available as G17-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G18 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines has been reapproved, available as G18-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G24 Standard Practice for Conducting Exposures to Daylight Filtered Through Glass has been revised to G24-13 developed by Committee G03.02, ASTM BOS Volume 14.04.
  • G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens has been reapproved, available as G38-01(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment has been reapproved, available as G41-90(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution has been reapproved, available as G44-99(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G46 Standard Guide for Examination and Evaluation of Pitting Corrosion has been reapproved, available as G46-94(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G55 Standard Test Method for Evaluating Pipeline Coating Patch Materials has been reapproved, available as G55-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G60 Standard Practice for Conducting Cyclic Humidity Exposures has been reapproved, available as G60-01(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G62 Standard Test Methods for Holiday Detection in Pipeline Coatings has been reapproved, available as G62-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys has been reapproved, available as G64-99(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) has been reapproved, available as G66-99(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G76 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets has been revised to G76-13 developed by Committee G02.10, ASTM BOS Volume 03.02.
  • G87 Standard Practice for Conducting Moist SO2 Tests has been reapproved, available as G87-02(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G95 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) has been reapproved, available as G95-07(2013) developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G97 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications has been reapproved, available as G97-97(2013) developed by Committee G01.10, ASTM BOS Volume 03.02.
  • G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments has been reapproved, available as G109-07(2013) developed by Committee G01.14, ASTM BOS Volume 03.02.
  • G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both has been reapproved, available as G111-97(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking has been reapproved, available as G129-00(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals has been reapproved, available as G135-95(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service has been reapproved, available as G146-01(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G157 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries has been reapproved, available as G157-98(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G161 Standard Guide for Corrosion-Related Failure Analysis has been reapproved, available as G161-00(2013) developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens has been reapproved, available as G168-00(2013) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • Published in international.