ISO Publications

Issue 48 – April 2013

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 472:2013 (Edition 4) Plastics. Vocabulary
  • ISO 717-1:2013 (Edition 3) Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation
  • ISO 717-2:2013 (Edition 3) Acoustics. Rating of sound insulation in buildings and of building elements. Impact sound insulation
  • ISO 1101:2012 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
    CORRIGENDUM 1:February 2013
  • ISO 1524:2013 (Edition 4) Paints, varnishes and printing inks. Determination of fineness of grind
  • ISO 1833-22:2013 Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)
  • ISO 1833-26:2013 Textiles. Quantitative chemical analysis. Mixtures of melamine and cotton or aramide fibres (method using hot formic acid)
  • ISO 2974:2013 Diesel engines. 60 degree female cones for high-pressure fuel injection components
  • ISO 4000-1:2013 (Edition 10) Passenger car tyres and rims. Tyres (metric series)
  • ISO 4892-2:2013 (Edition 3) Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps
  • ISO 5526:2013 (Edition 2) Cereals, pulses and other food grains. Nomenclature
  • ISO 6195:2013 (Edition 3) Fluid power systems and components. Cylinder rod wiper-ring housings in reciprocating applications. Dimensions and tolerances
  • ISO 6265:2013 (Edition 3) Alpine skis. Determination of deformation load and breaking load
  • ISO 6266:2013 (Edition 2) Alpine skis. Determination of fatigue indexes. Cyclic loading test
  • ISO 6529:2013 (Edition 3) Protective clothing. Protection against chemicals. Determination of resistance of protective clothing materials to permeation by liquids and gases
  • ISO 6887-6:2013 Microbiology of food and animal feed. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of samples taken at the primary production stage
  • ISO 7134:2013 (Edition 3) Earth-moving machinery. Graders. Terminology and commercial specifications
  • ISO 7240-24:2010 Fire detection and fire alarm systems. Sound system loudspeakers
    AMENDMENT 1:February 2013
  • ISO 7396-1:2007 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
    AMENDMENT 3:March 2013
  • ISO 7790:2013 (Edition 3) Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions
  • ISO 8536-4:2010 Infusion equipment for medical use. Infusion sets for single use, gravity feed
    AMENDMENT 1:March 2013
  • ISO 8587:2006 Sensory analysis. Methodology. Ranking
    AMENDMENT 1:February 2013
  • ISO/IEC 9798-2:2008 Information technology. Security techniques. Entity authentication. Mechanisms using symmetric encipherment algorithms
    CORRIGENDUM 3:February 2013
  • ISO/IEC 9995-10:2013 Information technology. Keyboard layouts for text and office systems. Conventional symbols and methods to represent graphic characters not uniquely recognizable by their glyph on keyboards and in documentation
  • ISO 10115:2013 (Edition 2) Essential oil of tarragon (Artemisia dracunculus L.)
  • ISO 10315:2013 (Edition 3) Cigarettes. Determination of nicotine in smoke condensates. Gas chromatographic method
  • ISO 10323:2013 (Edition 2) Dentistry. Bore diameters for rotary instruments such as discs and wheels
  • ISO 10524-3:2005 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
    AMENDMENT 1:March 2013
  • ISO 11056:1999 Sensory analysis. Methodology. Magnitude estimation method
    AMENDMENT 1:February 2013
  • ISO 11711-1:2013 Ships and marine technology. Piping and machinery. Ballast water sampling and analysis. Discharge sampling port
  • ISO 11843-6:2013 Capability of detection. Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
  • ISO 12217-1:2013 (Edition 2) Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m
  • ISO 12217-2:2013 (Edition 2) Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m
  • ISO 12217-3:2013 (Edition 2) Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m
  • ISO 12815:2013 Fibre-reinforced plastic composites. Determination of plain-pin bearing strength
  • ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antifungal activity of semiconducting photocatalytic materials
  • ISO/IEC TS 13249-7:2013 Information technology. Database languages. SQL multimedia and application packages. History
  • ISO 13307:2013 Microbiology of food and animal feed. Primary production stage. Sampling techniques
  • ISO/IEC TR 14165-313:2013 Information technology. Fibre channel. Avionics environment. Anonymous synchronous messaging (FC-AE-ASM)
  • ISO/IEC TR 14165-314:2013 Information technology. Fibre channel. Avionics environment. Remote direct memory access (FCAE-RDMA)
  • ISO 14644-8:2013 (Edition 2) Cleanrooms and associated controlled environments. Classification of air cleanliness by chemical concentration (ACC)
  • ISO 14644-10:2013 Cleanrooms and associated controlled environments. Classification of surface cleanliness by chemical concentration
  • ISO 14649-13:2013 Automation systems and integration. Physical device control. Data model for computerized numerical controllers. Process data for wire electrical discharge machining (wire-EDM)
  • ISO 14649-14:2013 Automation systems and integration. Physical device control. Data model for computerized numerical controllers. Process data for sink electrical discharge machining (sink-EDM)
  • ISO 14720-1:2013 Testing of ceramic raw and basic materials. Determination of sulphur in powders and granules of non-oxidic ceramic raw and basic materials. Infrared measurement methods
  • ISO 14720-2:2013 Testing of ceramic raw and basic materials. Determination of sulphur in powders and granules of non-oxidic ceramic raw and basic materials. Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in an oxygen flow
  • ISO 14890:2013 (Edition 2) Conveyor belts. Specification for rubber- or plastics-covered conveyor belts of textile construction for general use
  • ISO 14910-1:2013 (Edition 2) Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification
  • ISO 14910-2:2013 (Edition 2) Plastics. Thermoplastic polyester/ ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
  • ISO 15765-4:2011 Road vehicles. Diagnostic communication over Controller Area Network (DoCAN). Requirements for emissions-related systems
    AMENDMENT 1:February 2013
  • ISO 15781:2013 Photography. Digital still cameras. Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
  • ISO 15874-1:2013 (Edition 2) Plastics piping systems for hot and cold water installations. Polypropylene (PP). General
  • ISO 15874-2:2013 (Edition 2) Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes
  • ISO 15874-3:2013 (Edition 2) Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings
  • ISO 15874-5:2013 (Edition 2) Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system
  • ISO/IEC 15940:2013 (Edition 2) Systems and software engineering. Software engineering environment services
  • ISO 16049-1:2013 (Edition 2) Air cargo equipment. Restraint straps. Design criteria and testing methods
  • ISO 16119-1:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. General
  • ISO 16119-2:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Horizontal boom sprayers
  • ISO 16119-3:2013 Agricultural and forestry machinery. Environmental requirements for sprayers. Sprayers for bush and tree crops
  • ISO 16180:2013 Small craft. Navigation lights. Installation, placement and visibility
  • ISO/TR 16732-3:2013 Fire safety engineering. Fire risk assessment. Example of an industrial property
  • ISO 16844-1:2013 (Edition 2) Road vehicles. Tachograph systems. Electrical connectors
  • ISO 16911-1:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Manual reference method
  • ISO 16911-2:2013 Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts. Automated measuring systems
  • ISO 17363:2013 (Edition 2) Supply chain applications of RFID. Freight containers
  • ISO 17372:2008 Animal feeding stuffs. Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography
    AMENDMENT 1:February 2013
  • ISO 18096:2013 Thermal insulating products for building equipment and industrial installations. Determination of maximum service temperature for preformed pipe insulation
  • ISO 18754:2013 (Edition 2) Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of density and apparent porosity
  • ISO/IEC 19784-4:2011 Information technology. Biometric application programming interface. Biometric sensor function provider interface
    CORRIGENDUM 1:February 2013
  • ISO/IEC 19794-1:2011 Information technology. Biometric data interchange formats. Framework
    AMENDMENT 1:February 2013
  • ISO 20566:2013 (Edition 2) Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory-scale car-wash
  • ISO 20653:2013 (Edition 2) Road vehicles. Degrees of protection (IP code). Protection of electrical equipment against foreign objects, water and access
  • ISO 20795-1:2013 (Edition 2) Dentistry. Base polymers. Denture base polymers
  • ISO 20795-2:2013 (Edition 2) Dentistry. Base polymers. Orthodontic base polymers
  • ISO 21091:2013 Health informatics. Directory services for healthcare providers, subjects of care and other entities
  • ISO 21180:2013 (Edition 2) Light conveyor belts. Determination of the maximum tensile strength
  • ISO 21181:2013 (Edition 2) Light conveyor belts. Determination of the relaxed elastic modulus
  • ISO 21182:2013 (Edition 2) Light conveyor belts. Determination of the coefficient of friction
  • ISO 21218:2013 (Edition 2) Intelligent transport systems. Communications access for land mobiles (CALM). Access technology support
  • ISO 22891:2013 (Edition 2) Paper. Determination of transmittance by diffuse reflectance measurement
  • ISO 23480:2013 (Edition 2) Tools for pressing. Sliding plates
  • ISO/IEC 26555:2013 Software and systems engineering. Tools and methods for product line technical management
  • ISO 26683-2:2013 Intelligent transport systems. Freight land conveyance content identification and communication. Application interface profiles
  • ISO 27789:2013 Health informatics. Audit trails for electronic health records
  • ISO 28005-1:2013 Security management systems for the supply chain. Electronic port clearance (EPC). Message structures
  • ISO/IEC 29142-3:2013 Information technology. Print cartridge characterization. Environment
  • ISO/IEC 29187-1:2013 Information technology. Identification of privacy protection requirements pertaining to learning, education and training (LET). Framework and reference mode

 

Published in international.