ASTM STANDARDS

Issue 43 – October 2012

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service Editorial Review Board change A182/A182M-12a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications Editorial Review Board change A193/A193M-12b developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement has been revised to A970/A970M-12 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • B30 Standard Specification for Copper Alloys in Ingot Form has been revised to B30-12 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors has been reapproved, available as B105-05(2012) developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel has been revised to B212-12 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B439 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) has been revised to B439-12 developed by Committee B09.04, ASTM BOS Volume 02.05.
  • B584 Standard Specification for Copper Alloy Sand Castings for General Applications has been revised to B584-12 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B784 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables has been reapproved, available as B784-01(2012) developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B852 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel has been revised to B852-12 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides has been revised to B886-12 developed by Committee B09.06, ASTM BOS Volume 02.05.
  • B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides has been revised to B887-12 developed by Committee B09.06, ASTM BOS Volume 02.05.
  • B952/B952M Standard Specification for Zinc Alloys in Ingot Form for Spin Casting has been revised to B952/B952M-12 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B960 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc has been revised to B960-12 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B984 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use is a new standard, now available. B984-12 developed by Committee B08.08.02, ASTM BOS Volume 02.05.
  • C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field has been revised to C31/C31M-12 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units has been revised to C140-12a developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores has been revised to C174/C174M-12 developed by Committee C09.69, ASTM BOS Volume 04.02.
  • C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) has been revised to C216-12 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement has been revised to C226-12 developed by Committee C01.20, ASTM BOS Volume 04.01.
  • C287 Standard Specification for Chemical-Resistant Sulfur Mortar has been reapproved, available as C287-98(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C294 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates has been revised to C294-12 developed by Committee C09.65, ASTM BOS Volume 04.02.
  • C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings has been reapproved, available as C307-03(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars has been editorially changed, available as C308-00(2012)e1 developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C321 Standard Test Method for Bond Strength of Chemical-Resistant Mortars has been reapproved, available as C321-00(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar has been reapproved, available as C386-93(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure has been editorially changed, available as C393/C393M-11e1 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C395 Standard Specification for Chemical-Resistant Resin Mortars has been reapproved, available as C395-01(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars has been reapproved, available as C397-00(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry has been reapproved, available as C398-98(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C399 Standard Practice for Use of Chemical-Resistant Resin Mortars has been reapproved, available as C399-98(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes has been reapproved, available as C413-01(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C414 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars has been reapproved, available as C414-03(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars has been reapproved, available as C466-03(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C494/C494M Standard Specification for Chemical Admixtures for Concrete has been revised to C494/C494M-12 developed by Committee C09.23, ASTM BOS Volume 04.02.
  • C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes has been reapproved, available as C531-00(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes has been reapproved, available as C579-01(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes has been reapproved, available as C580-02(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) has been revised to C652-12 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile has been reapproved, available as C658-98(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile has been reapproved, available as C723-98(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry has been revised to C780-12 developed by Committee C12.02, ASTM BOS Volume 04.05.
  • C868 Standard Test Method for Chemical Resistance of Protective Linings has been reapproved, available as C868-02(2012) developed by Committee C03.03, ASTM BOS Volume 04.05.
  • C902 Standard Specification for Pedestrian and Light Traffic Paving Brick has been revised to C902-12 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C904 Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials has been reapproved, available as C904-01(2012) developed by Committee C03.05, ASTM BOS Volume 04.05.
  • C905 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes has been reapproved, available as C905-01(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C926 Standard Specification for Application of Portland Cement-Based Plaster has been revised to C926-12a developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1106 Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick has been reapproved, available as C1106-00(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics has been reapproved, available as C1147-01(2012) developed by Committee C03.03, ASTM BOS Volume 04.05.
  • C1159 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete has been reapproved, available as C1159-98(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C1160 Standard Specification for Chemical-Resistant Carbon Brick has been reapproved, available as C1160-97(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C1181 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts has been reapproved, available as C1181-00(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C1280 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing has been revised (with title change) to C1280-12a developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1312 Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory has been reapproved, available as C1312-97(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C1339 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts has been reapproved, available as C1339-02(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C1370 Standard Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes has been reapproved, available as C1370-00(2012) developed by Committee C03.01, ASTM BOS Volume 04.05.
  • C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings has been reapproved, available as C1486-00(2012) developed by Committee C03.02, ASTM BOS Volume 04.05.
  • C1708 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements has been revised to C1708-12 developed by Committee C09.43, ASTM BOS Volume 04.02.
  • D8 Standard Terminology Relating to Materials for Roads and Pavements has been revised to D8-12 developed by Committee D04.91, ASTM BOS Volume 04.03.
  • D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications has been revised to D16-12 developed by Committee D01.16, ASTM BOS Volume 06.01.
  • D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing has been editorially changed, available as D228/D228M-09e2 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) has been reapproved, available as D235-02(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material has been reapproved, available as D268-01(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D358 Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings has been reapproved (with editorial change), available as D358-98(2012)e1 developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D512 Standard Test Methods for Chloride Ion In Water has been revised to D512-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D581/D581M Standard Specification for Glass Fiber Greige Braided Tubular Sleeving has been revised (with designation change) to D581/D581M-12 developed by Committee D13.18, ASTM BOS Volume 07.01.
  • D600 Standard Specification for Liquid Paint Driers has been reapproved, available as D600-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D787 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds has been revised to D787-12 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D977 Standard Specification for Emulsified Asphalt has been revised to D977-12 developed by Committee D04.41, ASTM BOS Volume 04.03.
  • D1257 Standard Specification for High-Gravity Glycerin has been reapproved, available as D1257-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1296 Standard Test Method for Odor of Volatile Solvents and Diluents has been reapproved, available as D1296-01(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings has been revised to D1335-12 developed by Committee D13.21, ASTM BOS Volume 07.01.
  • D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method) has been reapproved, available as D1364-02(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1447 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement has been reapproved (with editorial change), available as D1447-07(2012)e1 developed by Committee D13.11, ASTM BOS Volume 07.01.
  • D1476 Standard Test Method for Heptane Miscibility of Lacquer Solvents has been reapproved, available as D1476-02(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1535 Standard Practice for Specifying Color by the Munsell System has been revised to D1535-12a developed by Committee E12.07, ASTM BOS Volume 06.01.
  • D1617 Standard Test Method for Ester Value of Solvents and Thinners has been reapproved, available as D1617-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer has been revised to D1657-12 developed by Committee D02.02, ASTM BOS Volume 05.01.
  • D1770 Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top has been reapproved (with editorial change), available as D1770-94(2012)e1 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D1783 Standard Test Methods for Phenolic Compounds in Water has been reapproved, available as D1783-01(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D1890 Standard Test Method for Beta Particle Radioactivity of Water? has been reapproved, available as D1890-05(2012) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D1943 Standard Test Method for Alpha Particle Radioactivity of Water? has been reapproved, available as D1943-05(2012) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D1969 Standard Specification for 2-Ethylhexanol has been reapproved, available as D1969-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2064 Standard Test Method for Print Resistance of Architectural Paints has been reapproved, available as D2064-91(2012) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D2165 Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers has been reapproved (with editorial change), available as D2165-94(2012)e1 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D2194 Standard Test Method for Concentration of Formaldehyde Solutions has been reapproved, available as D2194-02(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2378 Standard Specification for Formaldehyde 50???% Grade Uninhibited and 37???% Grade Inhibited and Uninhibited has been reapproved, available as D2378-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2399 Standard Practice for Selection of Cutback Asphalts has been revised to D2399-12 developed by Committee D04.40, ASTM BOS Volume 04.03.
  • D2580 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography has been reapproved, available as D2580-06(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D2616 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale has been reinstated, with revision to D2616-12 developed by Committee E12.11, ASTM BOS Volume 06.01.
  • D2635 Standard Specification for Methyl Isobutyl Carbinol has been reapproved, available as D2635-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2636 Standard Specification for Hexylene Glycol has been reapproved, available as D2636-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2693 Standard Specification for Ethylene Glycol has been reapproved, available as D2693-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2720 Standard Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for Various Commercial Compositions has been reapproved (with editorial change), available as D2720-94(2012)e1 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D2804 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography has been reapproved, available as D2804-02(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D2824/D2824M Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos has been editorially changed, available as D2824/D2824M-06(2012)e1 developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D3084 Standard Practice for Alpha-Particle Spectrometry of Water has been reapproved, available as D3084-05(2012) developed by Committee D19.04, ASTM BOS Volume 11.02.
  • D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy has been revised to D3237-12 developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D3313 Standard Test Method for Carbon Black—Individual Pellet Hardness has been revised to D3313-12 developed by Committee D24.51, ASTM BOS Volume 09.01.
  • D3456 Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack has been reapproved, available as D3456-86(2012) developed by Committee D01.28, ASTM BOS Volume 06.01.
  • D3625/D3625M Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water has been revised (with designation change) to D3625/D3625M-12 developed by Committee D04.22, ASTM BOS Volume 04.03.
  • D3633/D3633M Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems has been revised (with designation change) to D3633/D3633M-12 developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D3665 Standard Practice for Random Sampling of Construction Materials has been revised to D3665-12 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D3735 Standard Specification for VM&P Naphthas has been reapproved, available as D3735-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy has been revised to D3831-12 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering has been revised to D3936-12 developed by Committee D13.21, ASTM BOS Volume 07.01.
  • D3990 Standard Terminology Relating to Fabric Defects has been revised to D3990-12 developed by Committee D13.59, ASTM BOS Volume 07.01.
  • D3991 Standard Specifications for Fineness of Wool or Mohair and Assignment of Grade has been reapproved (with editorial change), available as D3991-94(2012)e1 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D3992 Standard Specifications for Fineness of Wool Top or Mohair Top and Assignment of Grade has been reapproved (with editorial change), available as D3992-94(2012)e1 developed by Committee D13.13, ASTM BOS Volume 07.01.
  • D4032 Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure has been reapproved, available as D4032-08(2012) developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D4086 Standard Practice for Visual Evaluation of Metamerism has been reapproved, available as D4086-92a(2012) developed by Committee E12.11, ASTM BOS Volume 06.01.
  • D4128 Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry has been reapproved, available as D4128-06(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D4165 Standard Test Method for Cyanogen Chloride in Water? has been reapproved, available as D4165-06(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss has been reapproved, available as D4213-08(2012) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography has been reapproved, available as D4367-02(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D4446 Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments has been reapproved, available as D4446-08(2012) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D4672 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols has been revised to D4672-12 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D4708 Standard Practice for Preparation of Uniform Free Films of Organic Coatings has been revised to D4708-12 developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D4709 Standard Specification for Methyl Acrylate has been reapproved, available as D4709-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D4710 Standard Specification for Acetaldehyde has been reapproved, available as D4710-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D4763 Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy has been reapproved, available as D4763-06(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D4773 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate has been reapproved, available as D4773-02(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D4789 Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol) has been revised to D4789-12 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D4828 Standard Test Methods for Practical Washability of Organic Coatings has been reapproved (with editorial change), available as D4828-94(2012)e1 developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D4837 Standard Specification for Propylene Glycol Monomethyl Ether has been reapproved, available as D4837-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D4848 Standard Terminology Related to Force, Deformation and Related Properties of Textiles has been reapproved, available as D4848-98(2012) developed by Committee D13.58, ASTM BOS Volume 07.02.
  • D4850 Standard Terminology Relating to Fabrics and Fabric Test Methods has been revised to D4850-12 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D5008 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography has been reapproved, available as D5008-07(2012) developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants has been revised to D5139-12 developed by Committee D33.02, ASTM BOS Volume 06.02.
  • D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry has been revised to D5184-12 developed by Committee D02.03, ASTM BOS Volume 05.02.
  • D5245 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses has been reapproved, available as D5245-92(2012) developed by Committee D19.24, ASTM BOS Volume 11.02.
  • D5259 Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure has been reapproved, available as D5259-92(2012) developed by Committee D19.24, ASTM BOS Volume 11.02.
  • D5404/D5404M Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator has been revised to D5404/D5404M-12 developed by Committee D04.25, ASTM BOS Volume 04.03.
  • D5465 Standard Practice for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods has been reapproved, available as D5465-93(2012) developed by Committee D19.24, ASTM BOS Volume 11.02.
  • D5684 Standard Terminology Relating to Pile Floor Coverings has been revised to D5684-12 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D5767 Standard Test Methods for Instrumental Measurement of Distinctness-of-Image Gloss of Coating Surfaces has been reapproved, available as D5767-95(2012) developed by Committee E12.03, ASTM BOS Volume 06.01.
  • D5867 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments has been revised (with title change) to D5867-12 developed by Committee D13.11, ASTM BOS Volume 07.02.
  • D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids has been revised to D6080-12 developed by Committee D02.N0.10, ASTM BOS Volume 05.02.
  • D6413/D6413M Standard Test Method for Flame Resistance of Textiles (Vertical Test) has been revised to D6413/D6413M-12 developed by Committee D13.52, ASTM BOS Volume 07.02.
  • D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes has been revised (with title change) to D6434-12 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D6500 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser has been reapproved (with editorial change), available as D6500-00(2012)e1 developed by Committee D13.13, ASTM BOS Volume 07.02.
  • D6719 Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering has been revised to D6719-12 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D6855 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode has been revised to D6855-12 developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) has been editorially changed, available as D7042-12e1 developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants has been revised to D7260-12 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry has been revised to D7303-12 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7315 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode has been revised to D7315-12 developed by Committee D19.07, ASTM BOS Volume 11.01.
  • D7568 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications is a new standard, now available. D7568-12 developed by Committee D20.20, ASTM BOS Volume 08.03.
  • D7729 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software is a new standard, now available. D7729-12 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D7748 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products has been editorially changed, available as D7748-12e1 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D7776 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories is a new standard, now available. D7776-12 developed by Committee D02.94.01, ASTM BOS Volume 05.04.
  • D7782 Standard Practice for Determination of the 99%/95% Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data is a new standard, now available. D7782-12 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D7783 Standard Practice for Within-laboratory Quantitation Estimation (WQE) is a new standard, now available. D7783-12 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys has been editorially changed, available as E34-11e1 developed by Committee E01.04, ASTM BOS Volume 03.05.
  • E84 Standard Test Method for Surface Burning Characteristics of Building Materials has been revised to E84-12b developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E179 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials has been reinstated, with revision to E179-12 developed by Committee E12.03, ASTM BOS Volume 06.01.
  • E396 Standard Test Methods for Chemical Analysis of Cadmium has been editorially changed, available as E396-12e1 developed by Committee E01.05, ASTM BOS Volume 03.05.
  • E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry has been revised (with title change) to E878-12 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1247 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry has been reinstated, with revision to E1247-12 developed by Committee E12.05, ASTM BOS Volume 06.01.
  • E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques has been revised to E1613-12 developed by Committee E06.23, ASTM BOS Volume 04.11.
  • E1697 Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes has been reapproved (with editorial change), available as E1697-05(2012)e1 developed by Committee E18.03, ASTM BOS Volume 15.08.
  • E1732 Standard Terminology Relating to Forensic Science has been revised to E1732-12 developed by Committee E30.92, ASTM BOS Volume 14.02.
  • E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings has been revised to E1797-12 developed by Committee E06.23, ASTM BOS Volume 04.11.
  • E1979 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead has been revised to E1979-12 developed by Committee E06.23, ASTM BOS Volume 04.11.
  • E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes has been revised to E1996-12 developed by Committee E06.51, ASTM BOS Volume 04.11.
  • E2152 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data has been revised to E2152-12 developed by Committee E12.05, ASTM BOS Volume 06.01.
  • E2444 Terminology Relating to Measurements Taken on Thin, Reflecting Films has been editorially changed, available as E2444-11e1 developed by Committee E08.02, ASTM BOS Volume 03.01.
  • E2726/E2726M Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands has been revised to E2726/E2726M-12a developed by Committee E05.14, ASTM BOS Volume 04.07.
  • F29 Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications has been reapproved, available as F29-97(2012) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F30 Standard Specification for Iron-Nickel Sealing Alloys has been reapproved, available as F30-96(2012) developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F146 Standard Test Methods for Fluid Resistance of Gasket Materials has been revised to F146-12 developed by Committee F03.40, ASTM BOS Volume 09.02.
  • F439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 has been revised to F439-12 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F441/F441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 has been revised to F441/F441M-12 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • F442/F442M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) has been revised to F442/F442M-12 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments has been revised to F519-12 developed by Committee F07.04, ASTM BOS Volume 15.03.
  • F745 Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications (Withdrawn 2012) has been withdrawn, with no replacement. F745-07 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F760 Standard Specification for Food Service Equipment Manuals has been reapproved, available as F760-93(2012) developed by Committee F26.91, ASTM BOS Volume 15.12.
  • F1023 Standard Specification for Dispensers, Powdered Iced Tea has been revised to F1023-12 developed by Committee F26.03, ASTM BOS Volume 15.12.
  • F1031 Standard Practice for Training the Emergency Medical Technician (Basic) has been reapproved, available as F1031-00(2012) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1094 Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method has been reapproved, available as F1094-87(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1229 Standard Guide for Qualification and Training of EMS Air Medical Patient Care Providers has been reapproved, available as F1229-01(2012) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1268 Standard Guide for Establishing and Operating a Public Information, Education, and Relations Program for Emergency Medical Service Systems has been reapproved, available as F1268-90(2012) developed by Committee F30.03, ASTM BOS Volume 13.02.
  • F1287 Standard Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care has been reapproved, available as F1287-90(2012) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1360 Standard Specification for Ovens, Microwave, Electric has been reapproved, available as F1360-06(2012) developed by Committee F26.02, ASTM BOS Volume 15.12.
  • F1372 Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components has been reapproved, available as F1372-93(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1373 Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components has been reapproved, available as F1373-93(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1374 Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components has been reapproved, available as F1374-92(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1375 Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components has been reapproved, available as F1375-92(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1376 Standard Guide for Metallurgical Analysis for Gas Distribution System Components has been reapproved, available as F1376-92(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1394 Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves has been reapproved, available as F1394-92(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1396 Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components has been reapproved, available as F1396-93(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1397 Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components has been reapproved, available as F1397-93(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1398 Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components has been reapproved, available as F1398-93(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1438 Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components has been reapproved, available as F1438-93(2012) developed by Committee F01.10, ASTM BOS Volume 10.04.
  • F1453 Standard Guide for Training and Evaluation of First Responders Who Provide Emergency Medical Care has been reapproved, available as F1453-92(2012) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1577 Standard Test Methods for Detention Locks for Swinging Doors has been reapproved, available as F1577-05(2012) developed by Committee F33.04, ASTM BOS Volume 15.08.
  • F1643 Standard Test Methods for Detention Sliding Door Locking Device Assembly has been reapproved, available as F1643-05(2012) developed by Committee F33.04, ASTM BOS Volume 15.08.
  • F1653 Standard Guide for Scope of Performance of Triage in a Prehospital Environment has been reapproved, available as F1653-95(2012) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1654 Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment has been reapproved, available as F1654-95(2012) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1705 Standard Guide for Training Emergency Medical Services Ambulance Operations has been reapproved, available as F1705-96(2012) developed by Committee F30.02, ASTM BOS Volume 13.02.
  • F1739 Standard Guide for Performance of a Water Rescuer—Level I has been reapproved, available as F1739-96(2012) developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F1740 Standard Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope has been reapproved, available as F1740-96(2012) developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F1758 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors has been reapproved, available as F1758-05(2012) developed by Committee F33.04, ASTM BOS Volume 15.08.
  • F1764 Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue has been reapproved, available as F1764-97(2012) developed by Committee F32.01, ASTM BOS Volume 13.02.
  • F1823 Standard Guide for Water Rescue Personal Flotation Device (PFD) has been reapproved, available as F1823-97(2012) developed by Committee F32.01, ASTM BOS Volume 13.02.
  • F1827 Standard Terminology Relating to Food Service Equipment has been revised to F1827-12 developed by Committee F26.91, ASTM BOS Volume 15.12.
  • F1847 Standard Guide for Demonstrating Minimum Skills of Search and Rescue Dogs and Handlers has been reapproved, available as F1847-98(2012) developed by Committee F32.02, ASTM BOS Volume 13.02.
  • F1892 Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices has been revised to F1892-12 developed by Committee F01.11, ASTM BOS Volume 10.04.
  • F1900 Standard Test Method for Water Resistance of Footwear Using a Walking Step Simulator has been reapproved, available as F1900-98(2012) developed by Committee F08.54, ASTM BOS Volume 15.07.
  • F1915 Standard Test Methods for Glazing for Detention Facilities has been reapproved, available as F1915-05(2012) developed by Committee F33.02, ASTM BOS Volume 15.08.
  • F1921 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs has been revised to F1921-12 developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2025 Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment has been reapproved, available as F2025-06(2012) developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F2050 Standard Consumer Safety Specification for Hand-Held Infant Carriers has been revised to F2050-12 developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2088 Standard Consumer Safety Specification for Infant Swings has been revised to F2088-12a developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2111 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes has been reapproved, available as F2111-01a(2011) developed by Committee F07.07, ASTM BOS Volume 15.03.
  • F2153 Standard Test Method for Measurement of Backpack Capacity has been reapproved, available as F2153-07(2012) developed by Committee F08.22, ASTM BOS Volume 15.07.
  • F2270 Standard Guide for Construction and Maintenance of Warning Track Areas on Athletic Fields has been revised (with title change) to F2270-12 developed by Committee F08.64, ASTM BOS Volume 15.07.
  • F2283 Standard Specification for Shipboard Oil Pollution Abatement System has been revised to F2283-12 developed by Committee F25.06, ASTM BOS Volume 01.07.
  • F2387 Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs has been reapproved, available as F2387-04(2012) developed by Committee F15.51, ASTM BOS Volume 15.11.
  • F2432 Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment has been revised to F2432-12 developed by Committee F26.03, ASTM BOS Volume 15.12.
  • F2435 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe has been revised to F2435-12 developed by Committee F17.11, ASTM BOS Volume 08.04.
  • F2480 Standard Guide for In-ground Concrete Skatepark has been reapproved, available as F2480-06(2012) developed by Committee F08.66, ASTM BOS Volume 15.07.
  • F2520 Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets has been reapproved, available as F2520-05(2012) developed by Committee F26.03, ASTM BOS Volume 15.12.
  • F2542 Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities has been reapproved, available as F2542-05(2012) developed by Committee F33.04, ASTM BOS Volume 15.08.
  • F2568 Standard Test Method for Measurement of Sleeping Bags has been reapproved, available as F2568-06(2012) developed by Committee F08.22, ASTM BOS Volume 15.07.
  • F2639 Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems has been editorially changed, available as F2639-07e1 developed by Committee F39.01, ASTM BOS Volume 15.11.
  • F2684/F2684M Standard Test Method for Portable High Anchor Devices has been editorially changed, available as F2684/F2684M-07(2012)e1 developed by Committee F32.01, ASTM BOS Volume 13.02.
  • F2785 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings has been revised to F2785-12 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F2828 Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System is a new standard, now available. F2828-12 developed by Committee F11.35, ASTM BOS Volume 15.08.
  • F2921 Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies has been editorially changed, available as F2921-11e1 developed by Committee F42.01, ASTM BOS Volume 10.04.
  • F2921 Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies has been editorially changed, available as F2921-11e2 developed by Committee F42.01, ASTM BOS Volume 10.04.
  • F2946 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes is a new standard, now available. F2946-12 developed by Committee F17.20, ASTM BOS Volume 08.04.
  • F2954 Standard Guide for Training for Level II Rope Rescue (R2) Rescuer Endorsement is a new standard, now available. F2954-12 developed by Committee F32.02, ASTM BOS Volume 13.02.
  • F2955 Standard Guide for Training for Level III Rope Rescue (R3) Rescuer Endorsement is a new standard, now available. F2955-12 developed by Committee F32.03, ASTM BOS Volume 13.02.
  • F2964 Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device is a new standard, now available. F2964-12 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F2969 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe is a new standard, now available. F2969-12 developed by Committee F17.61, ASTM BOS Volume 08.04.
  • G40 Standard Terminology Relating to Wear and Erosion has been revised to G40-12 developed by Committee G02.91, ASTM BOS Volume 03.02.
  • NACE/ASTMG193 Standard Terminology and Acronyms Relating to Corrosion has been revised to NACE/ASTMG193-12b developed by Committee J01.02, ASTM BOS Volume 03.02.

Published in international.