ASTM STANDARDS

Issue 44 – November 2012

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A283/A283M - Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates has been revised to A283/A283M-12 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A351/A351M - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts has been revised to A351/A351M-12a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A416/A416M - Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete has been revised to A416/A416M-12a developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A510M - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] (Withdrawn 2011) has been withdrawn and replaced by A510M developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A608/A608M - Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures has been revised to A608/A608M-12 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A703/A703M - Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts has been revised to A703/A703M-12a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A752 - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel (Withdrawn 2011) has been withdrawn and replaced by A752 developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A752M - Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] (Withdrawn 2011) has been withdrawn and replaced by A752M developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A824 - Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence has been reapproved, available as A824-01(2012) developed by Committee F14.40, ASTM BOS Volume 01.06.
  • A995/A995M - Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts has been editorially changed, available as A995/A995M-12e1 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A1011/A1011M - Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength has been revised to A1011/A1011M-12a developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1023/A1023M - Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes has been editorially changed, available as A1023/A1023M-09e1 developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A1058 - Standard Test Methods for Mechanical Testing of Steel Products—Metric has been revised to A1058-12a developed by Committee A01.13, ASTM BOS Volume 01.03.
  • A1064/A1064M - Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete has been editorially changed, available as A1064/A1064M-10e1 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1076/A1076M - Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Pre-coated Sheet Steel is a new standard, now available. A1076/A1076M-12 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A1078/A1078M - Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement is a new standard, now available. A1078/A1078M-12 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1079 - Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process is a new standard, now available. A1079-12 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • B523/B523M - Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes has been revised to B53/B523M-12a developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B584 - Standard Specification for Copper Alloy Sand Castings for General Applications has been revised to B584-12a developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B661 - Standard Practice for Heat Treatment of Magnesium Alloys has been revised to B661-12 developed by Committee B07.04, ASTM BOS Volume 02.02.
  • B779 - Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminium Conductors, Steel-Reinforced (ACSR/TW) has been revised to B779-12 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B856 - Standard Specification for Concentric-Lay-Stranded Aluminium Conductors, Coated Steel Supported (ACSS) has been revised to B856-12 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • C39/C39M - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens has been revised to C39/C39M-12a developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C76 - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe has been revised to C76-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C76M - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C76M-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C158 - Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture) has been reapproved, available as C158-02(2012) developed by Committee C14.04, ASTM BOS Volume 15.02.
  • C192/C192M - Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory has been revised to C192/C192M-12 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C361M - Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric) has been revised to C361M-12 developed by Committee C13.04, ASTM BOS Volume 04.05.
  • C443 - Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets has been revised to C443-12 developed by Committee C13.08, ASTM BOS Volume 04.05.
  • C473 - Standard Test Methods for Physical Testing of Gypsum Panel Products has been revised to C473-12 developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C506 - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe has been revised to C506-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C506M - Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C506M-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C507 - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe has been revised to C507-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C507M - Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C507M-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C655 - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe has been revised to C655-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C655M - Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) has been revised to C655M-12a developed by Committee C13.02, ASTM BOS Volume 04.05.
  • C687 - Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation has been revised to C687-12 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C755 - Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation has been revised to C755-10 developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C800 - Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type) has been revised to C800-08 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C835 - Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C has been revised to C835-06 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C890 - Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures has been revised to C890-12 developed by Committee C27.30, ASTM BOS Volume 04.05.
  • C930 - Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories has been revised to C930-12 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C950/C950M - Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels has been reapproved, available as C950/C950M-08(2012) developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1067 - Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials has been revised to C1067-12 developed by Committee C09.94, ASTM BOS Volume 04.02.
  • C1240 - Standard Specification for Silica Fume Used in Cementitious Mixtures has been revised (with designation change) to C1240-12 developed by Committee C09.24, ASTM BOS Volume 04.02.
  • C1409 - Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components has been revised to C1409-12 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1417 - Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design has been revised to C1417-12 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1417M - Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) has been revised to C1417M-12 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1479 - Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations has been revised to C1479-12 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1479M - Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric) has been revised to C1479M-12 developed by Committee C13.05, ASTM BOS Volume 04.05.
  • C1509 - Standard Specification for Beaded Process Glass Pipe and Fittings has been reapproved, available as C1509-02(2012) developed by Committee C14.05, ASTM BOS Volume 15.02.
  • C1579 - Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) has been reapproved, available as C1579-06(2012) developed by Committee C09.42, ASTM BOS Volume 04.02.
  • D788 - Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds has been revised to D788-12 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D873 - Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) has been revised to D873-12 developed by Committee D02.14, ASTM BOS Volume 05.01.
  • D882 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting has been revised to D882-12 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D907 - Standard Terminology of Adhesives has been revised to D907-12a developed by Committee D14.04, ASTM BOS Volume 15.06.
  • D909 - Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline has been reapproved, available as D909-07(2012) developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D914 - Standard Test Methods for Ethyl cellulose has been revised to D914-12 developed by Committee D01.36, ASTM BOS Volume 06.03.
  • D1048 - Standard Specification for Rubber Insulating Blankets has been revised to D1048-12 developed by Committee F18.25, ASTM BOS Volume 10.03.
  • D1252 - Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water has been reapproved, available as D1252-06(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D1304 - Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation has been reapproved, available as D1304-99(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D1387 - Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes has been reapproved, available as D1387-89(2012) developed by Committee D21.02, ASTM BOS Volume 15.04.
  • D1601 - Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers has been revised to D1601-12 developed by Committee D20.70, ASTM BOS Volume 08.01.
  • D1780 - Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives has been reapproved, available as D1780-05(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D1921 - Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials has been revised to D1921-12 developed by Committee D20.70, ASTM BOS Volume 08.01.
  • D1986 - Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax has been reapproved, available as D1986-91(2012) developed by Committee D21.02, ASTM BOS Volume 15.04.
  • D2068 - Standard Test Method for Determining Filter Blocking Tendency has been revised to D2068-12 developed by Committee D02.14, ASTM BOS Volume 05.01.
  • D2098 - Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester has been reapproved, available as D2098-04(2012) developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D2210 - Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test has been reapproved, available as D2210-00(2012) developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D2346 - Standard Test Method for Apparent Density of Leather has been reapproved, available as D2346-00(2012) developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D2777 - Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water has been revised to D2777-12 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D2918 - Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel has been reapproved, available as D2918-99(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D2941 - Standard Test Method for Measuring Break Pattern of Leather (Break Scale) has been reapproved, available as D2941-00(2012) developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D3035 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter has been revised to D3035-12 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • D3166 - Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) has been reapproved, available as D3166-99(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D3308 - Standard Specification for PTFE Resin Skived Tape has been revised to D3308-12 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D3418 - Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry has been revised to D3418-12 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D3433 - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints has been reapproved, available as D3433-99(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D3644 - Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins has been reapproved, available as D3644-06(2012) developed by Committee D21.02, ASTM BOS Volume 15.04.
  • D3828 - Standard Test Methods for Flash Point by Small Scale Closed Cup Tester has been revised to D3828-12 developed by Committee D02.08, ASTM BOS Volume 05.02.
  • D3837 - Standard Practice for Preparing a Solution of Alkali–Soluble Resins has been reapproved, available as D3837-95(2012) developed by Committee D21.02, ASTM BOS Volume 15.04.
  • D4065 - Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures has been revised to D4065-12 developed by Committee D20.10, ASTM BOS Volume 08.02.
  • D4204 - Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study has been revised to D4204-12 developed by Committee D20.19, ASTM BOS Volume 08.02.
  • D4227 - Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces has been reapproved, available as D4227-05(2012) developed by Committee D33.05, ASTM BOS Volume 06.02.
  • D4228 - Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces has been reapproved, available as D4228-05(2012) developed by Committee D33.05, ASTM BOS Volume 06.02.
  • D4306 - Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination has been revised to D4306-12b developed by Committee D02.J0.04, ASTM BOS Volume 05.02.
  • D4354 - Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing has been revised to D4354-12 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D4544 - Standard Practice for Estimating Peat Deposit Thickness has been revised to D4544-12 developed by Committee D18.22, ASTM BOS Volume 04.08.
  • D4627 - Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids has been revised (with title change) to D4627-12 developed by Committee D02.L0.01, ASTM BOS Volume 05.02.
  • D4689 - Standard Specification for Adhesive, Casein-Type has been revised to D4689-12 developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D4690 - Standard Specification for Urea-Formaldehyde Resin Adhesives has been revised to D4690-12 developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D4751 - Standard Test Method for Determining Apparent Opening Size of a Geotextile has been revised to D4751-12 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D4884 - Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles has been revised to D4884-12 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D4946 - Standard Test Method for Blocking Resistance of Architectural Paints has been reapproved, available as D4946-89(2012) developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D5025 - Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials has been revised to D5025-12 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D5055 - Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists has been revised to D5055-12 developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D5101 - Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems has been revised to D5101-12 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D5127 - Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries has been revised to D5127-12 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D5239 - Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization has been revised to D5239-12 developed by Committee D18.15, ASTM BOS Volume 04.08.
  • D5572 - Standard Specification for Adhesives Used for Finger Joints in Non-structural Lumber Products has been reapproved, available as D5572-95(2012) developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D5573 - Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints has been reapproved, available as D5573-99(2012) developed by Committee D14.40, ASTM BOS Volume 15.06.
  • D5751 - Standard Specification for Adhesives Used for Laminate Joints in Non-structural Lumber Products has been reapproved, available as D5751-99(2012) developed by Committee D14.30, ASTM BOS Volume 15.06.
  • D5790 - Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry has been reapproved, available as D5790-95(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D5847 - Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis has been reapproved, available as D5847-02(2012) developed by Committee D19.02, ASTM BOS Volume 11.02.
  • D6040 - Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape has been revised to D6040-12 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D6102 - Standard Guide for Installation of Geosynthetic Clay Liners has been revised to D6102-12 developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D6145 - Standard Guide for Monitoring Sediment in Watersheds has been reapproved, available as D6145-97(2012) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D6146 - Standard Guide for Monitoring Aqueous Nutrients in Watersheds has been reapproved, available as D6146-97(2012) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D6205 - Standard Practice for Calibration of the James Static Coefficient of Friction Machine has been revised to D6205-12 developed by Committee D21.06, ASTM BOS Volume 15.04.
  • D6342 - Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy has been revised to D6342-12 developed by Committee D20.22, ASTM BOS Volume 08.03.
  • D6392 - Standard Test Method for Determining the Integrity of Non-reinforced Geomembrane Seams Produced Using Thermo-Fusion Methods has been revised to D6392-12 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D6396 - Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees has been reapproved, available as D6396-99(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D6411/D6411M - Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials has been reapproved, available as D6411/D6411M-99(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D6412/D6412M - Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Non-metallic Materials has been reapproved, available as D6412/D6412M-99(2012) developed by Committee D14.80, ASTM BOS Volume 15.06.
  • D6520 - Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds has been reapproved, available as D6520-06(2012) developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D6525 - Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products has been revised (with title change) to D6525-12 developed by Committee D35.05, ASTM BOS Volume 04.13.
  • D6566 - Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats has been revised to D6566-12 developed by Committee D35.05, ASTM BOS Volume 04.13.
  • D6587 - Standard Test Method for Yarn Number Using Automatic Tester has been revised to D6587-12 developed by Committee D13.58, ASTM BOS Volume 07.02.
  • D6624 - Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data has been revised to D6624-12 developed by Committee D02.25, ASTM BOS Volume 05.03.
  • D6766 - Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions has been revised (with title change) to D6766-12 developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D6779 - Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) has been revised to D6779-12a developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D6808 - Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis has been reapproved, available as D6808-02(2012) developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D6874 - Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration has been revised to D6874-12 developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D6924 - Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges has been reapproved, available as D6924-03(2012) developed by Committee D04.34, ASTM BOS Volume 04.03.
  • D7043 - Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump has been revised to D7043-12 developed by Committee D02.N0.07, ASTM BOS Volume 05.04.
  • D7047 - Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) has been revised (with title change) to D7047-12 developed by Committee D18.25, ASTM BOS Volume 04.09.
  • D7199 - Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models has been reapproved, available as D7199-07(2012) developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D7284 - Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection has been editorially changed, available as D7284-08e1 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7292 - Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) has been revised to D7292-12 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D7299 - Standard Practice for Verifying Performance of a Vertical Inclinometer Probe has been revised to D7299-12 developed by Committee D18.23, ASTM BOS Volume 04.09.
  • D7320 - Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine has been revised to D7320-12 developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
  • D7372 - Standard Guide for Analysis and Interpretation of Proficiency Test Program Results has been revised to D7372-12 developed by Committee D02.94, ASTM BOS Volume 05.04.
  • D7389 - Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes has been reapproved, available as D7389-07(2012) developed by Committee D21.02, ASTM BOS Volume 15.04.
  • D7404 - Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer has been reapproved, available as D7404-07(2012) developed by Committee D04.42, ASTM BOS Volume 04.03.
  • D7422 - Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine has been revised to D7422-12 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7436 - Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology has been revised to D7436-12 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D7452 - Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading has been revised to D7452-12 developed by Committee D02.B0.03, ASTM BOS Volume 05.04.
  • D7544 - Standard Specification for Pyrolysis Liquid Biofuel has been revised to D7544-12 developed by Committee D02.E0, ASTM BOS Volume 05.04.
  • D7589 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine has been revised to D7589-12 developed by Committee D02.B0.10, ASTM BOS Volume 05.04.
  • D7619 - Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter has been revised to D7619-12a developed by Committee D02.14, ASTM BOS Volume 05.04.
  • D7621 - Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction has been revised to D7621-12 developed by Committee D02.E0, ASTM BOS Volume 05.04.
  • D7642 - Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments is a new standard, now available. D7642-12 developed by Committee D13.11, ASTM BOS Volume 07.02.
  • D7764 - Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers is a new standard, now available. D7764-12 developed by Committee D18.23, ASTM BOS Volume 04.09.
  • D7768 - Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography is a new standard, now available. D7768-12 developed by Committee D01.21, ASTM BOS Volume 06.01.
  • D7804 - Standard Test Method for Fiber Shedding of Paint Roller Covers is a new standard, now available. D7804-12 developed by Committee D01.61, ASTM BOS Volume 06.02.
  • D7815 - Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl) is a new standard, now available. D7815-12 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • E119 - Standard Test Methods for Fire Tests of Building Construction and Materials has been revised to E119-12a developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E136 - Standard Test Method for Behaviour of Materials in a Vertical Tube Furnace at 750°C has been revised to E136-12 developed by Committee E05.23, ASTM BOS Volume 04.07.
  • E176 - Standard Terminology of Fire Standards has been revised to E176-12 developed by Committee E05.31, ASTM BOS Volume 04.07.
  • E322 - Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry has been revised (with title change) to E322-12 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E350 - Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron has been revised to E350-12 developed by Committee E01.01, ASTM BOS Volume 03.05.
  • E381 - Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings has been reapproved, available as E381-01(2012) developed by Committee E04.01, ASTM BOS Volume 03.01.
  • E426 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys has been revised (with title change) to E426-12 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E571 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products has been revised to E571-12 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E603 - Standard Guide for Room Fire Experiments has been revised to E603-12b developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E606/E606M - Standard Test Method for Strain-Controlled Fatigue Testing has been revised (with designation change) to E606/E606M-12 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E936 - Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012) has been withdrawn, with no replacement. E936-8R04 developed by Committee D08.20, ASTM BOS Volume 04.04.
  • E1106 - Standard Test Method for Primary Calibration of Acoustic Emission Sensors has been revised to E1106-12 developed by Committee E07.04, ASTM BOS Volume 03.03.
  • E1170 - Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces has been reapproved, available as E1170-97(2012) developed by Committee E17.33, ASTM BOS Volume 04.03.
  • E1300 - Standard Practice for Determining Load Resistance of Glass in Buildings has been editorially changed, available as E1300-12ae1 developed by Committee E06.51, ASTM BOS Volume 04.11.
  • E1351 - Standard Practice for Production and Evaluation of Field Metallographic Replicas has been reapproved, available as E1351-01(2012) developed by Committee E04.01, ASTM BOS Volume 03.01.
  • E1364 - Standard Test Method for Measuring Road Roughness by Static Level Method has been reapproved, available as E1364-95(2012) developed by Committee E17.31, ASTM BOS Volume 04.03.
  • E1494 - Standard Practice for Encapsulation Testing of Friable Asbestos-Containing Surfacing Materials has been revised to E1494-12 developed by Committee E06.24, ASTM BOS Volume 04.12.
  • E1575 - Standard Practice for Pressure Water Cleaning and Cutting has been revised to E1575-12 developed by Committee E34.03, ASTM BOS Volume 11.03.
  • E1605 - Standard Terminology Relating to Lead in Buildings has been reapproved, available as E1605-04(2012) developed by Committee E06.23, ASTM BOS Volume 04.11.
  • E1655 - Standard Practices for Infrared Multivariate Quantitative Analysis has been reapproved, available as E1655-05(2012) developed by Committee E13.11, ASTM BOS Volume 03.06.
  • E1672 - Standard Guide for Computed Tomography (CT) System Selection has been revised to E1672-12 developed by Committee E07.01, ASTM BOS Volume 03.03.
  • E1927 - Standard Guide for Conducting Subjective Pavement Ride Quality Ratings has been reapproved, available as E1927-98(2012) developed by Committee E17.33, ASTM BOS Volume 04.03.
  • E1932 - Standard Guide for Acoustic Emission Examination of Small Parts has been revised to E1932-12 developed by Committee E07.04, ASTM BOS Volume 03.03.
  • E2034 - Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces has been reapproved, available as E2034-99(2012) developed by Committee E17.33, ASTM BOS Volume 04.03.
  • E2061 - Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles has been revised to E2061-12 developed by Committee E05.17, ASTM BOS Volume 04.07.
  • E2239 - Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities has been revised to E2239-12 developed by Committee E06.23, ASTM BOS Volume 04.12.
  • E2301 - Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retro reflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry has been reinstated, with revision to E2301-12 developed by Committee E12.05, ASTM BOS Volume 06.01.
  • E2610 - Standard Test Method for Sensory Analysis—Duo-Trio Test has been reapproved, available as E2610-08(2011) developed by Committee E18.04, ASTM BOS Volume 15.08.
  • E2639 - Standard Test Method for Blast Resistance of Trash Receptacles has been revised to E2639-12 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2640 - Standard Guide for Resource Management in Emergency Management and Homeland Security is a new standard, now available. E2640-10 developed by Committee E54.02, ASTM BOS Volume 15.08.
  • E2649 - Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy has been revised to E2649-12 developed by Committee E06.22, ASTM BOS Volume 04.12.
  • E2825 - Standard Guide for Forensic Digital Image Processing is a new standard, now available. E2825-12 developed by Committee E30.12, ASTM BOS Volume 14.02.
  • E2837 - Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies is a new standard, now available. E2837-11 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2848 - Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance has been editorially changed, available as E2848-11e1 developed by Committee E44.09, ASTM BOS Volume 12.02.
  • E2894 - Standard Test Method for Applying Aerosolized Bacillus Spores as Dry Inocula to Inanimate Surfaces is a new standard, now available. E2894-12 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • F31 - Standard Specification for Nickel-Chromium-Iron Sealing Alloys has been revised (with title change) to F31-12 developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F139 - Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673) has been revised to F139-12 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F512 - Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation has been revised to F512-12 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • F549 - Standard Terminology Relating to Carbonless Copy Products has been reapproved, available as F549-85(2011) developed by Committee F05.01, ASTM BOS Volume 15.09.
  • F654 - Standard Specification for Residential Chain Link Fence Gates has been reapproved, available as F654-07(2012) developed by Committee F14.40, ASTM BOS Volume 01.06.
  • F670 - Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing has been reapproved, available as F670-02(2012) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F749 - Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit has been reapproved, available as F749-98(2012) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F750 - Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse has been reapproved, available as F750-87(2012) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F782 - Standard Specification for Doors, Furniture, Marine has been reapproved, available as F782-01(2012) developed by Committee F25.03, ASTM BOS Volume 01.07.
  • F842 - Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact has been revised to F842-12 developed by Committee E06.51, ASTM BOS Volume 04.12.
  • F909 - Standard Terminology Relating to Printers has been reapproved, available as F909-94a(2011) developed by Committee F05.01, ASTM BOS Volume 15.09.
  • F1001 - Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials has been revised to F1001-12 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F1027 - Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices has been reapproved, available as F1027-86(2012) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F1125 - Standard Terminology of Image Quality in Impact Printing Systems has been reapproved, available as F1125-87(2011) developed by Committee F05.01, ASTM BOS Volume 15.09.
  • F1148 - Standard Consumer Safety Performance Specification for Home Playground Equipment has been revised to F1148-12 developed by Committee F15.09, ASTM BOS Volume 15.11.
  • F1236 - Standard Guide for Visual Inspection of Electrical Protective Rubber Products has been reapproved, available as F1236-96(2012) developed by Committee F18.60, ASTM BOS Volume 10.03.
  • F1319 - Standard Test Method for Determination of Abrasion and Smudge Resistance of Images Produced from Business Copy Products (Crockmeter Method) has been reapproved, available as F1319-94(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F1409 - Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets has been reapproved, available as F1409-00(2010) developed by Committee F11.20, ASTM BOS Volume 15.08.
  • F1410 - Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners has been reapproved, available as F1410-98(2011) developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F1424 - Standard Test Method for Estimating Toner Usage in Full-Color Copiers Utilizing Dry Mono- or Dual-Component Toners has been reapproved, available as F1424-92(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F1425 - Standard Test Method for Determining the Tribocharge of Two-Component Developer Materials has been reapproved, available as F1425-06(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F1457 - Standard Terminology Relating to Laser Printers has been reapproved, available as F1457-94b(2011) developed by Committee F05.01, ASTM BOS Volume 15.09.
  • F1461 - Standard Practice for Chemical Protective Clothing Program has been revised to F1461-12 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F1478 - Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method) has been reapproved, available as F1478-06(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F1581 - Standard Specification for Composition of an organic Bone for Surgical Implants has been reapproved, available as F1581-08(2012) developed by Committee F04.13, ASTM BOS Volume 13.01.
  • F1639 - Standard Test Method for Performance of Combination Ovens (Withdrawn 2012) has been withdrawn and replaced by F1639-05 developed by Committee F26.06, ASTM BOS Volume 15.12.
  • F1704 - Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems has been revised to F1704-12 developed by Committee F26.07, ASTM BOS Volume 15.12.
  • F1754 - Standard Guide for Marine Vessel Structural Inspection Considerations (Withdrawn 2012) has been withdrawn, with no replacement. F1754- developed by Committee F25.01, ASTM BOS Volume 01.07.
  • F1789 - Standard Terminology for F16 Mechanical Fasteners has been revised to F1789-12 developed by Committee F16.94, ASTM BOS Volume 01.08.
  • F1835 - Standard Guide for Cable Splicing Installations has been reapproved (with editorial change), available as F1835-97(2012)e1 developed by Committee F25.10, ASTM BOS Volume 01.07.
  • F1839 - Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments has been reapproved, available as F1839-08(2012) developed by Committee F04.21, ASTM BOS Volume 13.01.
  • F1857 - Standard Terminology Relating to Ink Jet Printers and Images Made Therefrom has been reapproved, available as F1857-01(2011) developed by Committee F05.01, ASTM BOS Volume 15.09.
  • F1945 - Standard Practice for Determining the Light fastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting has been reapproved, available as F1945-05(2011) developed by Committee F05.07, ASTM BOS Volume 15.09.
  • F2036 - Standard Test Method for Evaluation of Larger Area Density and Background on Electro photographic Printers has been reapproved, available as F2036-05(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F2061 - Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions has been revised to F2061-12 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F2164 - Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure has been editorially changed, available as F2164-10e1 developed by Committee F17.40, ASTM BOS Volume 08.04.
  • F2194 - Standard Consumer Safety Specification for Bassinets and Cradles has been revised to F2194-12a developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F2463 - Standard Terminology for Livestock, Meat, and Poultry Evaluation Systems has been revised to F2463-12a developed by Committee F10.50, ASTM BOS Volume 15.12.
  • F2464 - Standard Guide for Cleaning of Various Oiled Shorelines and Habitats has been revised to F2464-12 developed by Committee F20.17, ASTM BOS Volume 11.05.
  • F2494 - Standard Test Method for Determining Energy Consumption of Copiers and Similar Office Imaging Equipment has been reapproved, available as F2494-05(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F2495 - Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment has been reapproved, available as F2495-05(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F2548 - Standard Specification for Expanded Metal Fence Systems for Security Purposes has been revised to F2548-12 developed by Committee F14.50, ASTM BOS Volume 01.06.
  • F2669 - Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides has been revised to F2669-12 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F2922 - Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers has been editorially changed, available as F2922-12e1 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • F2945 - Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings is a new standard, now available. F2945-12 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F2949 - Standard Specification for Pole Vault Box Collars is a new standard, now available. F2949-12 developed by Committee F08.67, ASTM BOS Volume 15.07.
  • NACE/ASTMG31 - Standard Guide for Laboratory Immersion Corrosion Testing of Metals has been revised to G31-12a developed by Committee J01.01, ASTM BOS Volume 03.02.

Published in international.