BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

British publication

The publication listed below is a new and revised British Standard that was made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 8445:2012 Bath and shower mats. Testing. Assessment of slip resistance properties

BS EN Publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 58:2012 (BS 2000-474:2012) Bitumen and bituminous binders. Sampling bituminous binders
    Supersedes BS EN 58:2004
  • BS EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking
    Supersedes BS EN 417:2003
  • BS EN ISO 527-1:2012 Plastics. Determination of tensile properties. General principles
    Supersedes BS EN ISO 527-1:1996
  • BS EN ISO 527-2:2012 Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics
    Supersedes BS EN ISO 527-2:1996
  • BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel. Nuts with specified property classes. Coarse thread and fine pitch thread
    Supersedes BS EN 20898-2:1994 and BS EN ISO 898-6:1996
  • BS EN 997:2012 WC pans and WC suites with integral trap
    Supersedes BS EN 997:2003
  • BS EN 1034-16:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Paper and board making machines
  • BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
    Together with BS EN ISO 1133-2:2011, it supersedes BS EN ISO 1133:2005 which is withdrawn
  • BS EN ISO 1135-4:2012 Transfusion equipment for medical use. Transfusion sets for single use
    Supersedes BS EN ISO 1135-4:2011
  • BS EN 1384:2012 Helmets for equestrian activities
    Supersedes BS EN 1384:1997
  • BS EN 1562:2012 Founding. Malleable cast irons
    Supersedes BS EN 1562:1997
  • BS EN 1708-3:2012 Welding. Basic weld joint details in steel. Clad, buttered and lined pressurized components
  • BS EN 1870-4:2012 Safety of woodworking machines. Circular sawing machines. Multiblade rip sawing machines with manual loading and/or unloading
    Supersedes BS EN 1870-4:2001+A1:2009
  • BS EN 1930:2011 Child use and care articles. Safety barriers. Safety requirements and test methods
    Supersedes BS EN 1930:2000
  • BS EN 2213:2012 Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bars. De ? 16 mm. 980 MPa ? Rm ? 1180 MPa
  • BS EN 2234:2012 Aerospace series. Cable, electrical, fire resistant. Technical specification
  • BS EN 2311:2012 Aerospace series. Bushes with self-lubricating liner. Technical specification
    Supersedes BS EN 2311:1990
  • BS EN 2997-002:2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65ºC to 175ºC continuous, 200ºC continuous, 260ºC peak. Specification of performance and contact and contact arrangements
    Supersedes BS EN 2997-002:2006
  • BS EN 3155-035:2012 Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, female, type D, crimp, class R. Product standard
    Supersedes BS EN 3155-035:2006
  • BS EN 3278:2012 Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
  • BS EN 3355:2012 Aerospace series. Titanium alloy TI-P64001 (Ti- 6Al-4V). Annealed. Extruded section. De ? 150 mm. 900 MPa ? Rm ? 1160 MPa
    Partially supersedes BS 3TA 11:2009
  • BS EN 3373-007:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
  • BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340ºC. Product standard
  • BS EN 3382:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, phosphated
  • BS EN 3383:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, vacuum cadmium plated
  • BS EN 3384:2012 Aerospace series. Rings retaining, external, axial mounting, steel, phosphated
    BS EN 3386:2012 Aerospace series. Rings retaining, radial mounting, steel, phosphated
  • BS EN 3417:2012 Aerospace series. Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
  • BS EN 3475-505:2012 Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands
    Supersedes BS EN 3475-505:2007
  • BS EN ISO 3581:2012 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
    Supersedes BS EN 1600:1997
  • BS EN 3706:2012 Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086
  • BS EN 3707:2012 Aerospace series. Headless threaded plugs. Installation holes
  • BS EN ISO 3745:2012 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for anechoic rooms and hemi-anechoic rooms
    Supersedes BS EN ISO 3745:2009
  • BS EN 3768:2012 Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºC
  • BS EN 6049-006:2012 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Selfwrapping protective sleeve, flexible post installation. Product standard
  • BS EN 6049-007:2012 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Self-wrapping protective sleeve, flexible post installation operating temperature from -55ºC to 260ºC. Product standard
  • BS EN ISO 8253-3:2012 Acoustics. Audiometric test methods. Speech audiometry
    Supersedes BS EN ISO 8253-3:1998
  • BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
    Supersedes BS EN ISO 8503-1:1995
  • BS EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
    Supersedes BS EN ISO 8503-2:1995
  • BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure
    Supersedes BS EN ISO 8503-3:1995
  • BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
    Supersedes BS EN ISO 8503-4:1995
  • BS EN ISO 9241-143:2012 Ergonomics of human-system interaction. Forms
    Supersedes BS EN ISO 9241-17:1998
  • BS EN ISO 10077-2:2012 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Numerical method for frames
    Supersedes BS EN ISO 10077-2:2003
  • BS EN ISO 10545-6:2012 Ceramic tiles. Determination of resistance to deep abrasion for unglazed tiles
    Supersedes BS EN ISO 10545-6:1997
  • BS EN ISO 10545-16:2012 Ceramic tiles. Determination of small colour differences
    Supersedes BS EN ISO 10545-16:2000
  • BS EN ISO 11114-1:2012 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
    Supersedes BS EN ISO 11114-1:1998
  • BS EN 12697-26:2012 Bituminous mixtures. Test methods for hot mix asphalt. Stiffness
    Supersedes BS EN 12697-26:2004
  • BS EN 12703:2012 Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
    Supersedes BS EN 12703:1999
  • BS EN 12839:2012 Precast concrete products. Elements for fences
    Supersedes BS EN 12839:2001
  • BS EN 12953-1:2012 Shell boilers. General
    Supersedes BS EN 12953-1:2002
  • BS EN 12953-2:2012 Shell boilers. Materials for pressure parts of boilers and accessories
    Supersedes BS EN 12953-2:2002
  • BS EN ISO 13032:2012 (BS 2000-600:2012) Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
  • BS EN 13352:2012 Specification for the performance of automatic tank contents gauges
    Supersedes BS EN 13352:2002
  • BS EN 13484:2012 Helmets for users of luges
    Supersedes BS EN 13484:2002
  • BS EN 13617-2:2012 Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
    Supersedes BS EN 13617-2:2004
  • BS EN 13617-3:2012 Petrol filling stations. Safety requirements for construction and performance of shear valves
    Supersedes BS EN 13617-3:2004
  • BS EN 13617-4:2012 Petrol filling stations. Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
    Supersedes BS EN 13617-4:2004
  • BS EN 14081-3:2012 Timber structures. Strength graded structural timber with rectangular cross section. Machine grading; additional requirements for factory production control
    Supersedes BS EN 14081-3:2005
  • BS EN 14362-1:2012 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres
    Supersedes BS EN 14362-1:2003 and BS EN 14362-2:2003
  • BS EN 15948:2012 Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
  • BS EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
  • BS EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
    Supersedes BS EN 13673-1:2003 and BS EN 13673-2:2005
  • BS EN 16126:2012 Solid biofuels. Determination of particle size distribution of disintegrated pellets
  • BS EN 16127:2012 Solid biofuels. Determination of length and diameter of pellets
  • BS EN 16144:2012 (BS 2000-567:2012) Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method
  • BS EN 16158:2012 Animal feeding stuffs. Determination of semduramicin content. Liquid chromatographic method using a “tree” analytical approach
  • BS EN 16160:2012 Animal feeding stuffs. Determination of Hydrocyanic acid by HPLC
  • BS EN 16162:2012 Animal feeding stuffs. Determination of decoquinate by HPLC with fluorescence detection
  • BS EN ISO/IEC 17020:2012 Conformity assessment. Requirements for the operation of various types of bodies performing inspection
    Supersedes BS EN ISO/IEC 17020:2004
  • BS EN ISO 17076-1:2012 Leather. Determination of abrasion resistance. Taber method
    Supersedes BS EN 14327:2003
  • BS EN ISO 20126:2012 Dentistry. Manual toothbrushes. General requirements and test methods
    Supersedes BS EN ISO 20126:2005
  • BS EN ISO 24011:2012 Resilient floor coverings. Specification for plain and decorative linoleum
    Supersedes BS EN 548:2011
  • BS EN ISO 24341:2012 Resilient and textile floor coverings. Determination of length, width and straightness of sheet
    Supersedes BS EN 426:1993 and BS ISO 24341:2006
  • BS EN ISO 26082-1:2012 Leather. Physical and mechanical test methods for the determination of soiling. Rubbing (Martindale) method
    Supersedes BS EN ISO 26082:2007
  • BS EN ISO 28802:2012 Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
  • BS EN ISO 28803:2012 Ergonomics of the physical environment. Application of international standards to people with special requirements
  • BS EN 50288-8:2012 Multi-element metallic cables used in analogue and digital communication and control. Specification for type 1 cables characterised up to 2 MHz
  • BS EN 50441-2:2012 Cables for indoor residential telecommunication installations. Screened cables. Grade 1
    Supersedes BS EN 50441-2:2006
  • BS EN 50441-4:2012 Cables for indoor residential telecommunication installations. Cables up to 1200 MHz. Grade 3
  • BS EN 50553:2012 Railway applications. Requirements for running capability in case of fire on board of rolling stock
  • BS EN 60512-9-2:2012 Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9b. Electrical load and temperature
    Partially supersedes BS 5772-5:1993
  • BS EN 60512-27-100:2012 Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors. Tests 27a to 27g
  • BS EN 60730-1:2011 Automatic electrical controls for household and similar use. General requirements
    Supersedes BS EN 60730-1:2000+A2:2008 which remains current
  • BS EN 60793-2:2012 Optical fibres. Product specifications. General
    Supersedes BS EN 60793-2:2008
  • BS EN 60874-1:2012 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Generic specification
    Supersedes BS EN 60874-1:2007
  • BS EN 61291-2:2012 Optical amplifiers. Digital applications. Performance specification template
    Supersedes BS EN 61291-2:2007
  • BS EN 61291-4:2012 Optical amplifiers. Multichannel applications. Performance specification template
    Supersedes BS EN 61291-4:2008
  • BS EN 61347-2-2:2012 Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic step-down convertors for filament lamps
    Supersedes BS EN 61347-2-2:2001+A2:2006 which remains current
  • BS EN 61347-2-7:2012 Lamp controlgear. Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
    Supersedes BS EN 61347-2-7:2006
  • BS EN 61587-1:2012 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series. Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
    Supersedes BS EN 61587-1:2007
  • BS EN 61869-3:2011 Instrument transformers. Additional requirements for inductive voltage transformers
    Supersedes BS EN 60044-2:1999 which remains current
  • BS EN 61869-5:2011 Instrument transformers. Additional requirements for capacitor voltage transformers
    Supersedes BS EN 60044-5:2004
  • BS EN 61915-2:2012 Low-voltage switchgear and controlgear. Device profiles for networked industrial devices. Root device profiles for starters and similar equipment
  • BS EN 62439-7:2012 Industrial communication networks. High availability automation networks. Ring-based Redundancy Protocol (RRP)
  • BS EN 62561-7:2012 Lightning Protection System Components (LPSC). Requirements for earthing enhancing compounds
    Supersedes BS EN 50164-7:2008 which remains current

BS ENs Implemented by amendment

  • BS EN ISO 10523:2012 Water quality. Determination of pH
    Implementation of European Standard EN ISO 10523 by amendment to BS ISO 10523:2008
  • BS EN ISO 10580:2012 Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions
    Implementation of European Standard EN ISO 10580 by amendment to BS ISO 10580:2010
  • BS EN ISO 10874:2012 Resilient, textile and laminate floor coverings. Classification
    Implementation of European Standard EN ISO 10874 by amendment to BS ISO 10874:2009
  • BS EN ISO 16265:2012 Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
    Implementation of European Standard EN ISO 16265 by amendment to BS ISO 16265:2009
  • BS EN ISO 23996:2012 Resilient floor coverings. Determination of density
    Implementation of European Standard EN ISO 23996 by amendment to BS ISO 23996:2007
  • BS EN ISO 24340:2012 Resilient floor coverings. Determination of thickness of layers
    Implementation of European Standard EN ISO 24340 by amendment to BS ISO 24340:2006
  • BS EN ISO 24344:2012 Resilient floor coverings. Determination of flexibility and deflection
    Implementation of European Standard EN ISO 24344 by amendment to BS ISO 24344:2008

BS Implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 230-1:2012 Test code for machine tools. Geometric accuracy of machines operating under no-load or quasistatic conditions
    Supersedes BS ISO 230-1:1996
  • BS ISO 3601-1:2012 Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes
    Supersedes BS ISO 3601-1:2008
  • BS ISO 3864-3:2012 Graphical symbols. Safety colours and safety signs. Design principles for graphical symbols for use in safety signs
    Supersedes BS 5499-6:2002
  • BS ISO 6721-11:2012 Plastics. Determination of dynamic mechanical properties. Glass transition temperature
  • BS ISO 7800:2012 Metallic materials. Wire. Simple torsion test
    Supersedes BS ISO 7800:2003
  • BS ISO/IEC 9899:2011 Information technology. Programming languages. C
    Supersedes BS ISO/IEC 9899:1999
  • BS ISO 10361:2012 Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
    Supersedes BS ISO 10361:2000
  • BS ISO 10597:2012 Road vehicles. Flat attachment fixing nuts for commercial vehicles. Test methods
  • BS ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
    Supersedes BS 7755-4.3.1:1994
  • BS ISO 11446-1:2012 Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords
    Supersedes BS EN ISO 11446:2004
  • BS ISO 11568-2:2012 Financial services. Key management (retail). Symmetric ciphers, their key management and life cycle
    Supersedes BS ISO 11568-2:2005
  • BS ISO 11783-2:2012 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Physical layer
    Supersedes BS ISO 11783-2:2002
  • BS ISO 12046:2012 Synchronous belt drives. Automotive belts. Determination of physical properties
  • BS ISO 12297:2012 Rolling bearings. Steel cylindrical rollers. Dimensions and tolerances
  • BS ISO 12404:2011 Soil quality. Guidance on the selection and application of screening methods
  • BS ISO 13374-3:2012 Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Communication
  • BS ISO 13613:2011 Ships and marine technology. Maintenance and testing to reduce losses in critical systems for propulsion
  • BS ISO 14371:2012 Water quality. Determination of fresh water sediment toxicity to Heterocypris incongruens (Crustacea, Ostracoda)
  • BS ISO/IEC 15026-3:2011 Systems and software engineering. Systems and software assurance. System integrity levels
    Supersedes BS ISO/IEC 15026:1998
  • BS ISO 15177:2012 Hot-rolled twin-roll cast carbon steel sheet of commercial quality
  • BS ISO 15179:2012 Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
  • BS ISO 15211:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
  • BS ISO 15817:2012 Earth-moving machinery. Safety requirements for remote operator control systems
    Supersedes BS ISO 15817:2005
  • BS ISO 16000-6:2011 Indoor air. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
  • BS ISO 16000-28:2012 Indoor air. Determination of odour emissions from building products using test chambers
  • BS ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Nominal dimensions and tolerances
    Supersedes BS ISO 16589-1:2001
  • BS ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Storage, handling and installation
    Supersedes BS ISO 16589-3:2001
  • BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Performance test procedures
    Supersedes BS ISO 16589-4:2001
  • BS ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Identification of visual imperfections
    Supersedes BS ISO 16589-5:2001
  • BS ISO 16609:2012 Financial services. Requirements for message authentication using symmetric techniques
    Supersedes BS ISO 16609:2004
  • BS ISO 18312-1:2012 Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Direct method
  • BS ISO 18312-2:2012 Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Indirect method
  • BS ISO 21940-13:2012 Mechanical vibration. Rotor balancing. Criteria and safeguards for the in-situ balancing of medium and large rotors
    Supersedes BS ISO 20806:2009
  • BS ISO 22846-2:2012 Personal equipment for protection against falls. Rope access systems. Code of practice
  • BS ISO 23269-2:2011 Ships and marine technology. Breathing apparatus for ships. Self-contained breathing apparatus for shipboard firefighters
  • BS ISO 26101:2012 Acoustics. Test methods for the qualification of free-field environments
  • BS ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire effluents. General
  • BS ISO/IEC 26511:2011 Systems and software engineering. Requirements for managers of user Documentation
    Supersedes PD ISO/IEC TR 9294:2005
  • BS ISO/IEC 26515:2011 Systems and software engineering. Developing user documentation in an agile environment
  • BS ISO/IEC 27010:2012 Information technology. Security techniques. Information security management for intersector and inter-organizational communications
  • BS ISO/IEC 29167-1:2012 Information technology. Automatic identification and data capture techniques. Air interface for security services and file management for RFID architecture

Published documents

  • PD 5454:2012 Guide for the storage and exhibition of archival materials
    Supersedes BS 5454:2000 and PD 0024:2001
  • PD CEN/TS 1451-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
    Supersedes DD ENV 1451-2:2001
  • PD CEN/TS 1519-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
    Supersedes DD ENV 1519-2:2001
  • PD CEN/TR 12108:2012 Plastics piping systems. Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
    Supersedes DD ENV 12108:2001
  • PD ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
  • PD CEN/TS 14632:2012 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
    Supersedes DD CEN/TS 14632:2006
  • PD ISO/IEC TS 15504-10:2011 Information technology. Process assessment. Safety extension
  • PD CEN/TR 16303-1:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Common reference information and reporting
  • PD CEN/TR 16303-2:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Vehicle Modelling and Verification
  • PD CEN/TR 16303-3:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Test Item Modelling and Verification
  • PD CEN/TS 16371:2012 Guidelines for implementors of EN 15744 and EN 15907
  • PD CEN ISO/TS 16401-2:2012 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS 17575-2. Abstract test suite
  • PD ISO/TS 19072-3:2012 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. type 1
    Supersedes DD ISO/TS 19072-3:2008
  • PD ISO/TS 22002-3:2011 Prerequisite programmes on food safety. Farming
  • PD ISO/TS 28581:2012 Water quality. Determination of selected nonpolar substances. Method using gas chromatography with mass spectrometric detection (GC-MS)
  • PD IEC/TR 62721:2012 Reliability of devices used in fibre optic systems. General and guidance

Publicly available specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 111:2012 Specification for the requirements and test methods for processing waste wood
  • PAS 134:2012 Terminology for carbon nanostructures
    Supersedes PAS 134:2007
  • PAS 198:2012 Specification for managing environmental conditions for cultural collections
  • PAS 2031:2012 Certification of energy efficiency measure (EEM) installation services

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 5306-4:2001+A1:2012 Fire extinguishing installations and equipment on premises. Specification for carbon dioxide systems
    AMENDMENT 1
  • BS EN 1034-3:2011 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Rereelers and winders
    CORRIGENDUM 1
  • BS EN 1492-2:2000+A1:2008 Textile slings. Safety. Round slings made of manmade fibres for general purpose use
    CORRIGENDUM 3
  • BS EN 3312:2012 Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De ? 150 mm
    CORRIGENDUM 1
  • BS EN 3383:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, vacuum cadmium plated
    CORRIGENDUM 1
  • PD CEN/TR 10354:2011 Chemical analysis of ferrous materials. Analysis of ferro-silicon. Determination of Si and Al by X-ray fluorescence spectrometry
    CORRIGENDUM 1
  • BS EN ISO 10523:2012 Water quality. Determination of pH
    CORRIGENDUM 1
  • BS EN ISO 10580:2012 Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions
    CORRIGENDUM 1
  • BS EN ISO 10874:2012 Resilient, textile and laminate floor coverings. Classification
    CORRIGENDUM 1
  • BS EN 13081:2008+A1:2012 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler
    AMENDMENT 1
  • BS EN 13082:2008+A1:2012 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve
    AMENDMENT 1
  • BS EN ISO 15609-5:2011 Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Resistance welding
    CORRIGENDUM 1
  • BS EN 15725:2010 Extended application reports on the fire performance of construction products and building elements
    CORRIGENDUM 1
  • BS EN ISO 16265:2012 Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
    CORRIGENDUM 1
  • BS EN ISO 23953-1:2005+A1:2012 Refrigerated display cabinets. Vocabulary
    AMENDMENT 1
  • BS EN ISO 23996:2012 Resilient floor coverings. Determination of density
    CORRIGENDUM 1
  • BS EN ISO 24340:2012 Resilient floor coverings. Determination of thickness of layers
    CORRIGENDUM 1
  • BS EN ISO 24344:2012 Resilient floor coverings. Determination of flexibility and deflection
    CORRIGENDUM 1
  • BS EN ISO 25539-2:2009 Cardiovascular implants. Endovascular devices. Vascular stents
    CORRIGENDUM 2
  • BS EN 50342-1:2006+A1:2011 Lead-acid starter batteries. General requirements and methods of test
    AMENDMENT 1
  • BS EN 60079-35-1:2011 Explosive atmospheres. Caplights for use in mines susceptible to firedamp. General requirements. Construction and testing in relation to the risk of explosion
    CORRIGENDUM 1
  • BS EN 60598-2-2:2012 Luminaires. Particular requirements. Recessed luminaires
    CORRIGENDUM 1
  • BS EN 60601-2-2:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
    AMENDMENT 11
  • BS EN 60601-2-19:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant incubators
    AMENDMENT 11
  • BS EN 60601-2-37:2008+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
    AMENDMENT 11
  • BS EN 60601-2-41:2009+A11:2011 Medical electrical equipment. Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis
    AMENDMENT 11
  • BS EN 60601-2-50:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant phototherapy equipment
    AMENDMENT 11
  • BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
    CORRIGENDUM 3
  • BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
    CORRIGENDUM 1
  • BS EN 62040-2:2006 Uninterruptible power systems (UPS). Electromagnetic compatibility (EMC) requirements
    CORRIGENDUM 2
  • BS ISO 355:2007+A1:2012 Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations
    AMENDMENT 1
  • BS ISO 7199:2009+A1:2012 Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators)
    AMENDMENT 1
  • BS ISO/IEC 13211-1:1995 Information technology. Programming languages. Prolog. General core
    CORRIGENDUM 1
  • BS ISO/IEC 14143-1:2007 Information technology. Software measurement. Functional size measurement. Definition of concepts
    CORRIGENDUM 1
  • PD IEC/TR 60344:2007 Calculation of D.C. resistance of plain and coated copper conductors of low-frequency cables and wires. Application guide
    CORRIGENDUM 1

British Standards withdrawn

  • BS 4800:1989 Schedule of paint colours for building purposes
    Superseded by BS 4800:2011
  • BS 5454:2000 Recommendations for the storage and exhibition of archival documents
    Superseded by PD 5454:2012
  • BS 5499-6:2002 Graphical symbols and signs. Safety signs, including fire safety signs. Creation and design of graphical symbols for use in safety signs. Requirements
    Superseded by BS ISO 3864-3:2012
  • BS 7755-4.3.1:1994 (ISO 11269-1:1993) Soil quality. Biological methods. Effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
    Superseded by BS ISO 11269-1:2012
  • DD 243:2004 Installation and configuration of intruder alarm systems designed to generate confirmed alarm conditions. Code of practice
    Superseded by BS 8243:2010
  • BS EN 426:1993 Resilient floor coverings. Determination of width, length, straightness and flatness of sheet material
    Superseded by BS EN ISO 24341:2012
  • BS EN 429:1993 Resilient floor coverings. Determination of the thickness of layers
    Superseded by BS EN ISO 24340:2012
  • BS EN 435:1994 Resilient floor coverings. Determination of flexibility
    Superseded by BS EN ISO 24344:2012
  • BS EN 436:1994 Resilient floor coverings. Determination of density
    Superseded by BS EN ISO 23996:2012
  • BS EN 548:2011 Resilient floor coverings. Specification for plain and decorative linoleum
    Superseded by BS EN ISO 24011:2012
  • BS EN 685:2007 Resilient, textile and laminate floor coverings. Classification
    Superseded by BS EN ISO 10874:2012
  • BS EN ISO 898-6:1996 Mechanical properties of fasteners. Nuts with specified proof load values. Fine pitch thread
    Superseded by BS EN ISO 898-2:2012
  • BS EN ISO 1133:2005 Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
    Superseded by BS EN ISO 1133-1:2011 and BS EN ISO 1133-2:2011
  • DD ENV 1451-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
    Superseded by PD CEN/TS 1451-2:2012
  • DD ENV 1519-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
    Superseded by PD CEN/TS 1519-2:2012
  • BS EN 1600:1997 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification
    Superseded by BS EN ISO 3581:2012
  • BS EN 1854:2006 Pressure sensing devices for gas burners and gas burning appliances
    Superseded by BS EN 1854:2010
  • BS EN ISO 9241-17:1998 Ergonomic requirements for office work with visual display terminals (VDTs). Form-filling dialogues
    Superseded by BS EN ISO 9241-143:2012
  • BS EN ISO 11446:2004 Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13- pole connectors for vehicles with 12 V nominal supply voltage
    Superseded by BS ISO 11446-1:2012
  • DD ENV 12108:2001 Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
    Superseded by PD CEN/TR 12108:2012
  • BS EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum explosion pressure
    Superseded by BS EN 15967:2011
  • BS EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum rate of explosion pressure rise
    Superseded by BS EN 15967:2011
  • BS EN 14327:2003 Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather
    Superseded by BS EN ISO 17076-1:2012
  • BS EN 14362-2:2003 Textiles. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible by extracting the fibres
    Superseded by BS EN 14362-1:2012
  • DD CEN/TS 14632:2006 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP)
    Superseded by PD CEN/TS 14632:2012
  • BS EN 20898-2:1994 (ISO 898-2:1992) Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread
    Superseded by BS EN ISO 898-2:2012
  • BS EN ISO 26082:2007 Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather
    Superseded by BS EN ISO 26082-1:2012
  • BS EN 55014-1:2006 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission
    Superseded by BS EN 55014-1:2006+A1:2009
  • BS EN 60034-15:1996 Rotating electrical machines. Impulse voltage withstand levels of rotating A.C. machines with form-wound stator coils
    Superseded by BS EN 60034-15:2009
  • BS EN 60044-5:2004 Instrument transformers. Capacitor voltage transformers
    Superseded by BS EN 61869-5:2011
  • BS EN 60601-2-44:2001 (BS 5724-2.44:2001) Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of X-ray equipment for computed tomography
    Superseded by BS EN 60601-2-44:2009
  • BS EN 60601-2-50:2002 Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of infant phototherapy equipment
    Superseded by BS EN 60601-2-50:2009
  • BS EN 60745-2-1:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for drills and impact drills
    Superseded by BS EN 60745-2-1:2003+A1:2009
  • BS EN 60745-2-2:2003 Hand-held motor-operated electric tools. S/s

    You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

    British publication

    The publication listed below is a new and revised British Standard that was made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

    • BS 8445:2012 Bath and shower mats. Testing. Assessment of slip resistance properties

    BS EN Publications

    The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

    • BS EN 58:2012 (BS 2000-474:2012) Bitumen and bituminous binders. Sampling bituminous binders
      Supersedes BS EN 58:2004
    • BS EN 417:2012 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking
      Supersedes BS EN 417:2003
    • BS EN ISO 527-1:2012 Plastics. Determination of tensile properties. General principles
      Supersedes BS EN ISO 527-1:1996
    • BS EN ISO 527-2:2012 Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics
      Supersedes BS EN ISO 527-2:1996
    • BS EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel. Nuts with specified property classes. Coarse thread and fine pitch thread
      Supersedes BS EN 20898-2:1994 and BS EN ISO 898-6:1996
    • BS EN 997:2012 WC pans and WC suites with integral trap
      Supersedes BS EN 997:2003
    • BS EN 1034-16:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Paper and board making machines
    • BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
      Together with BS EN ISO 1133-2:2011, it supersedes BS EN ISO 1133:2005 which is withdrawn
    • BS EN ISO 1135-4:2012 Transfusion equipment for medical use. Transfusion sets for single use
      Supersedes BS EN ISO 1135-4:2011
    • BS EN 1384:2012 Helmets for equestrian activities
      Supersedes BS EN 1384:1997
    • BS EN 1562:2012 Founding. Malleable cast irons
      Supersedes BS EN 1562:1997
    • BS EN 1708-3:2012 Welding. Basic weld joint details in steel. Clad, buttered and lined pressurized components
    • BS EN 1870-4:2012 Safety of woodworking machines. Circular sawing machines. Multiblade rip sawing machines with manual loading and/or unloading
      Supersedes BS EN 1870-4:2001+A1:2009
    • BS EN 1930:2011 Child use and care articles. Safety barriers. Safety requirements and test methods
      Supersedes BS EN 1930:2000
    • BS EN 2213:2012 Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Bars. De ? 16 mm. 980 MPa ? Rm ? 1180 MPa
    • BS EN 2234:2012 Aerospace series. Cable, electrical, fire resistant. Technical specification
    • BS EN 2311:2012 Aerospace series. Bushes with self-lubricating liner. Technical specification
      Supersedes BS EN 2311:1990
    • BS EN 2997-002:2012 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65ºC to 175ºC continuous, 200ºC continuous, 260ºC peak. Specification of performance and contact and contact arrangements
      Supersedes BS EN 2997-002:2006
    • BS EN 3155-035:2012 Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, triaxial, size 08, female, type D, crimp, class R. Product standard
      Supersedes BS EN 3155-035:2006
    • BS EN 3278:2012 Aerospace series. Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
    • BS EN 3355:2012 Aerospace series. Titanium alloy TI-P64001 (Ti- 6Al-4V). Annealed. Extruded section. De ? 150 mm. 900 MPa ? Rm ? 1160 MPa
      Partially supersedes BS 3TA 11:2009
    • BS EN 3373-007:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
    • BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340ºC. Product standard
    • BS EN 3382:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, phosphated
    • BS EN 3383:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, vacuum cadmium plated
    • BS EN 3384:2012 Aerospace series. Rings retaining, external, axial mounting, steel, phosphated
      BS EN 3386:2012 Aerospace series. Rings retaining, radial mounting, steel, phosphated
    • BS EN 3417:2012 Aerospace series. Rivets, solid, universal head, in nickel base alloy NI-P11, metric series
    • BS EN 3475-505:2012 Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands
      Supersedes BS EN 3475-505:2007
    • BS EN ISO 3581:2012 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
      Supersedes BS EN 1600:1997
    • BS EN 3706:2012 Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086
    • BS EN 3707:2012 Aerospace series. Headless threaded plugs. Installation holes
    • BS EN ISO 3745:2012 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for anechoic rooms and hemi-anechoic rooms
      Supersedes BS EN ISO 3745:2009
    • BS EN 3768:2012 Aerospace series. Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºC
    • BS EN 6049-006:2012 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Selfwrapping protective sleeve, flexible post installation. Product standard
    • BS EN 6049-007:2012 Aerospace series. Electrical cables, installation. Protection sleeve in meta-aramid fibres. Self-wrapping protective sleeve, flexible post installation operating temperature from -55ºC to 260ºC. Product standard
    • BS EN ISO 8253-3:2012 Acoustics. Audiometric test methods. Speech audiometry
      Supersedes BS EN ISO 8253-3:1998
    • BS EN ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
      Supersedes BS EN ISO 8503-1:1995
    • BS EN ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure
      Supersedes BS EN ISO 8503-2:1995
    • BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure
      Supersedes BS EN ISO 8503-3:1995
    • BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
      Supersedes BS EN ISO 8503-4:1995
    • BS EN ISO 9241-143:2012 Ergonomics of human-system interaction. Forms
      Supersedes BS EN ISO 9241-17:1998
    • BS EN ISO 10077-2:2012 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Numerical method for frames
      Supersedes BS EN ISO 10077-2:2003
    • BS EN ISO 10545-6:2012 Ceramic tiles. Determination of resistance to deep abrasion for unglazed tiles
      Supersedes BS EN ISO 10545-6:1997
    • BS EN ISO 10545-16:2012 Ceramic tiles. Determination of small colour differences
      Supersedes BS EN ISO 10545-16:2000
    • BS EN ISO 11114-1:2012 Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials
      Supersedes BS EN ISO 11114-1:1998
    • BS EN 12697-26:2012 Bituminous mixtures. Test methods for hot mix asphalt. Stiffness
      Supersedes BS EN 12697-26:2004
    • BS EN 12703:2012 Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
      Supersedes BS EN 12703:1999
    • BS EN 12839:2012 Precast concrete products. Elements for fences
      Supersedes BS EN 12839:2001
    • BS EN 12953-1:2012 Shell boilers. General
      Supersedes BS EN 12953-1:2002
    • BS EN 12953-2:2012 Shell boilers. Materials for pressure parts of boilers and accessories
      Supersedes BS EN 12953-2:2002
    • BS EN ISO 13032:2012 (BS 2000-600:2012) Petroleum products. Determination of low concentration of sulfur in automotive fuels. Energy-dispersive X-ray fluorescence spectrometric method
    • BS EN 13352:2012 Specification for the performance of automatic tank contents gauges
      Supersedes BS EN 13352:2002
    • BS EN 13484:2012 Helmets for users of luges
      Supersedes BS EN 13484:2002
    • BS EN 13617-2:2012 Petrol filling stations. Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
      Supersedes BS EN 13617-2:2004
    • BS EN 13617-3:2012 Petrol filling stations. Safety requirements for construction and performance of shear valves
      Supersedes BS EN 13617-3:2004
    • BS EN 13617-4:2012 Petrol filling stations. Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
      Supersedes BS EN 13617-4:2004
    • BS EN 14081-3:2012 Timber structures. Strength graded structural timber with rectangular cross section. Machine grading; additional requirements for factory production control
      Supersedes BS EN 14081-3:2005
    • BS EN 14362-1:2012 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres
      Supersedes BS EN 14362-1:2003 and BS EN 14362-2:2003
    • BS EN 15948:2012 Cereals. Determination of moisture and protein. Method using Near-Infrared-Spectroscopy in whole kernels
    • BS EN 15949:2012 Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills
    • BS EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
      Supersedes BS EN 13673-1:2003 and BS EN 13673-2:2005
    • BS EN 16126:2012 Solid biofuels. Determination of particle size distribution of disintegrated pellets
    • BS EN 16127:2012 Solid biofuels. Determination of length and diameter of pellets
    • BS EN 16144:2012 (BS 2000-567:2012) Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels. Fixed range injection period, constant volume combustion chamber method
    • BS EN 16158:2012 Animal feeding stuffs. Determination of semduramicin content. Liquid chromatographic method using a “tree” analytical approach
    • BS EN 16160:2012 Animal feeding stuffs. Determination of Hydrocyanic acid by HPLC
    • BS EN 16162:2012 Animal feeding stuffs. Determination of decoquinate by HPLC with fluorescence detection
    • BS EN ISO/IEC 17020:2012 Conformity assessment. Requirements for the operation of various types of bodies performing inspection
      Supersedes BS EN ISO/IEC 17020:2004
    • BS EN ISO 17076-1:2012 Leather. Determination of abrasion resistance. Taber method
      Supersedes BS EN 14327:2003
    • BS EN ISO 20126:2012 Dentistry. Manual toothbrushes. General requirements and test methods
      Supersedes BS EN ISO 20126:2005
    • BS EN ISO 24011:2012 Resilient floor coverings. Specification for plain and decorative linoleum
      Supersedes BS EN 548:2011
    • BS EN ISO 24341:2012 Resilient and textile floor coverings. Determination of length, width and straightness of sheet
      Supersedes BS EN 426:1993 and BS ISO 24341:2006
    • BS EN ISO 26082-1:2012 Leather. Physical and mechanical test methods for the determination of soiling. Rubbing (Martindale) method
      Supersedes BS EN ISO 26082:2007
    • BS EN ISO 28802:2012 Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
    • BS EN ISO 28803:2012 Ergonomics of the physical environment. Application of international standards to people with special requirements
    • BS EN 50288-8:2012 Multi-element metallic cables used in analogue and digital communication and control. Specification for type 1 cables characterised up to 2 MHz
    • BS EN 50441-2:2012 Cables for indoor residential telecommunication installations. Screened cables. Grade 1
      Supersedes BS EN 50441-2:2006
    • BS EN 50441-4:2012 Cables for indoor residential telecommunication installations. Cables up to 1200 MHz. Grade 3
    • BS EN 50553:2012 Railway applications. Requirements for running capability in case of fire on board of rolling stock
    • BS EN 60512-9-2:2012 Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9b. Electrical load and temperature
      Partially supersedes BS 5772-5:1993
    • BS EN 60512-27-100:2012 Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on IEC 60603-7 series connectors. Tests 27a to 27g
    • BS EN 60730-1:2011 Automatic electrical controls for household and similar use. General requirements
      Supersedes BS EN 60730-1:2000+A2:2008 which remains current
    • BS EN 60793-2:2012 Optical fibres. Product specifications. General
      Supersedes BS EN 60793-2:2008
    • BS EN 60874-1:2012 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Generic specification
      Supersedes BS EN 60874-1:2007
    • BS EN 61291-2:2012 Optical amplifiers. Digital applications. Performance specification template
      Supersedes BS EN 61291-2:2007
    • BS EN 61291-4:2012 Optical amplifiers. Multichannel applications. Performance specification template
      Supersedes BS EN 61291-4:2008
    • BS EN 61347-2-2:2012 Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic step-down convertors for filament lamps
      Supersedes BS EN 61347-2-2:2001+A2:2006 which remains current
    • BS EN 61347-2-7:2012 Lamp controlgear. Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
      Supersedes BS EN 61347-2-7:2006
    • BS EN 61587-1:2012 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series. Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions
      Supersedes BS EN 61587-1:2007
    • BS EN 61869-3:2011 Instrument transformers. Additional requirements for inductive voltage transformers
      Supersedes BS EN 60044-2:1999 which remains current
    • BS EN 61869-5:2011 Instrument transformers. Additional requirements for capacitor voltage transformers
      Supersedes BS EN 60044-5:2004
    • BS EN 61915-2:2012 Low-voltage switchgear and controlgear. Device profiles for networked industrial devices. Root device profiles for starters and similar equipment
    • BS EN 62439-7:2012 Industrial communication networks. High availability automation networks. Ring-based Redundancy Protocol (RRP)
    • BS EN 62561-7:2012 Lightning Protection System Components (LPSC). Requirements for earthing enhancing compounds
      Supersedes BS EN 50164-7:2008 which remains current

    BS ENs Implemented by amendment

    • BS EN ISO 10523:2012 Water quality. Determination of pH
      Implementation of European Standard EN ISO 10523 by amendment to BS ISO 10523:2008
    • BS EN ISO 10580:2012 Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions
      Implementation of European Standard EN ISO 10580 by amendment to BS ISO 10580:2010
    • BS EN ISO 10874:2012 Resilient, textile and laminate floor coverings. Classification
      Implementation of European Standard EN ISO 10874 by amendment to BS ISO 10874:2009
    • BS EN ISO 16265:2012 Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
      Implementation of European Standard EN ISO 16265 by amendment to BS ISO 16265:2009
    • BS EN ISO 23996:2012 Resilient floor coverings. Determination of density
      Implementation of European Standard EN ISO 23996 by amendment to BS ISO 23996:2007
    • BS EN ISO 24340:2012 Resilient floor coverings. Determination of thickness of layers
      Implementation of European Standard EN ISO 24340 by amendment to BS ISO 24340:2006
    • BS EN ISO 24344:2012 Resilient floor coverings. Determination of flexibility and deflection
      Implementation of European Standard EN ISO 24344 by amendment to BS ISO 24344:2008

    BS Implementations

    BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

    • BS ISO 230-1:2012 Test code for machine tools. Geometric accuracy of machines operating under no-load or quasistatic conditions
      Supersedes BS ISO 230-1:1996
    • BS ISO 3601-1:2012 Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes
      Supersedes BS ISO 3601-1:2008
    • BS ISO 3864-3:2012 Graphical symbols. Safety colours and safety signs. Design principles for graphical symbols for use in safety signs
      Supersedes BS 5499-6:2002
    • BS ISO 6721-11:2012 Plastics. Determination of dynamic mechanical properties. Glass transition temperature
    • BS ISO 7800:2012 Metallic materials. Wire. Simple torsion test
      Supersedes BS ISO 7800:2003
    • BS ISO/IEC 9899:2011 Information technology. Programming languages. C
      Supersedes BS ISO/IEC 9899:1999
    • BS ISO 10361:2012 Textile floor coverings. Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
      Supersedes BS ISO 10361:2000
    • BS ISO 10597:2012 Road vehicles. Flat attachment fixing nuts for commercial vehicles. Test methods
    • BS ISO 11269-1:2012 Soil quality. Determination of the effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
      Supersedes BS 7755-4.3.1:1994
    • BS ISO 11446-1:2012 Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage not intended to cross water fords
      Supersedes BS EN ISO 11446:2004
    • BS ISO 11568-2:2012 Financial services. Key management (retail). Symmetric ciphers, their key management and life cycle
      Supersedes BS ISO 11568-2:2005
    • BS ISO 11783-2:2012 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Physical layer
      Supersedes BS ISO 11783-2:2002
    • BS ISO 12046:2012 Synchronous belt drives. Automotive belts. Determination of physical properties
    • BS ISO 12297:2012 Rolling bearings. Steel cylindrical rollers. Dimensions and tolerances
    • BS ISO 12404:2011 Soil quality. Guidance on the selection and application of screening methods
    • BS ISO 13374-3:2012 Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Communication
    • BS ISO 13613:2011 Ships and marine technology. Maintenance and testing to reduce losses in critical systems for propulsion
    • BS ISO 14371:2012 Water quality. Determination of fresh water sediment toxicity to Heterocypris incongruens (Crustacea, Ostracoda)
    • BS ISO/IEC 15026-3:2011 Systems and software engineering. Systems and software assurance. System integrity levels
      Supersedes BS ISO/IEC 15026:1998
    • BS ISO 15177:2012 Hot-rolled twin-roll cast carbon steel sheet of commercial quality
    • BS ISO 15179:2012 Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
    • BS ISO 15211:2012 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
    • BS ISO 15817:2012 Earth-moving machinery. Safety requirements for remote operator control systems
      Supersedes BS ISO 15817:2005
    • BS ISO 16000-6:2011 Indoor air. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
    • BS ISO 16000-28:2012 Indoor air. Determination of odour emissions from building products using test chambers
    • BS ISO 16589-1:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Nominal dimensions and tolerances
      Supersedes BS ISO 16589-1:2001
    • BS ISO 16589-3:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Storage, handling and installation
      Supersedes BS ISO 16589-3:2001
    • BS ISO 16589-4:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Performance test procedures
      Supersedes BS ISO 16589-4:2001
    • BS ISO 16589-5:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Identification of visual imperfections
      Supersedes BS ISO 16589-5:2001
    • BS ISO 16609:2012 Financial services. Requirements for message authentication using symmetric techniques
      Supersedes BS ISO 16609:2004
    • BS ISO 18312-1:2012 Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Direct method
    • BS ISO 18312-2:2012 Mechanical vibration and shock. Measurement of vibration power flow from machines into connected support structures. Indirect method
    • BS ISO 21940-13:2012 Mechanical vibration. Rotor balancing. Criteria and safeguards for the in-situ balancing of medium and large rotors
      Supersedes BS ISO 20806:2009
    • BS ISO 22846-2:2012 Personal equipment for protection against falls. Rope access systems. Code of practice
    • BS ISO 23269-2:2011 Ships and marine technology. Breathing apparatus for ships. Self-contained breathing apparatus for shipboard firefighters
    • BS ISO 26101:2012 Acoustics. Test methods for the qualification of free-field environments
    • BS ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire effluents. General
    • BS ISO/IEC 26511:2011 Systems and software engineering. Requirements for managers of user Documentation
      Supersedes PD ISO/IEC TR 9294:2005
    • BS ISO/IEC 26515:2011 Systems and software engineering. Developing user documentation in an agile environment
    • BS ISO/IEC 27010:2012 Information technology. Security techniques. Information security management for intersector and inter-organizational communications
    • BS ISO/IEC 29167-1:2012 Information technology. Automatic identification and data capture techniques. Air interface for security services and file management for RFID architecture

    Published documents

    • PD 5454:2012 Guide for the storage and exhibition of archival materials
      Supersedes BS 5454:2000 and PD 0024:2001
    • PD CEN/TS 1451-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
      Supersedes DD ENV 1451-2:2001
    • PD CEN/TS 1519-2:2012 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
      Supersedes DD ENV 1519-2:2001
    • PD CEN/TR 12108:2012 Plastics piping systems. Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
      Supersedes DD ENV 12108:2001
    • PD ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
    • PD CEN/TS 14632:2012 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
      Supersedes DD CEN/TS 14632:2006
    • PD ISO/IEC TS 15504-10:2011 Information technology. Process assessment. Safety extension
    • PD CEN/TR 16303-1:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Common reference information and reporting
    • PD CEN/TR 16303-2:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Vehicle Modelling and Verification
    • PD CEN/TR 16303-3:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Test Item Modelling and Verification
    • PD CEN/TS 16371:2012 Guidelines for implementors of EN 15744 and EN 15907
    • PD CEN ISO/TS 16401-2:2012 Electronic fee collection. Evaluation of equipment for conformity to ISO/TS 17575-2. Abstract test suite
    • PD ISO/TS 19072-3:2012 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. type 1
      Supersedes DD ISO/TS 19072-3:2008
    • PD ISO/TS 22002-3:2011 Prerequisite programmes on food safety. Farming
    • PD ISO/TS 28581:2012 Water quality. Determination of selected nonpolar substances. Method using gas chromatography with mass spectrometric detection (GC-MS)
    • PD IEC/TR 62721:2012 Reliability of devices used in fibre optic systems. General and guidance

    Publicly available specifications

    Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

    • PAS 111:2012 Specification for the requirements and test methods for processing waste wood
    • PAS 134:2012 Terminology for carbon nanostructures
      Supersedes PAS 134:2007
    • PAS 198:2012 Specification for managing environmental conditions for cultural collections
    • PAS 2031:2012 Certification of energy efficiency measure (EEM) installation services

    Corrigenda to British Standards and updated British Standards

    Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

    • BS 5306-4:2001+A1:2012 Fire extinguishing installations and equipment on premises. Specification for carbon dioxide systems
      AMENDMENT 1
    • BS EN 1034-3:2011 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Rereelers and winders
      CORRIGENDUM 1
    • BS EN 1492-2:2000+A1:2008 Textile slings. Safety. Round slings made of manmade fibres for general purpose use
      CORRIGENDUM 3
    • BS EN 3312:2012 Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Forgings De ? 150 mm
      CORRIGENDUM 1
    • BS EN 3383:2012 Aerospace series. Rings retaining, internal, axial mounting, steel, vacuum cadmium plated
      CORRIGENDUM 1
    • PD CEN/TR 10354:2011 Chemical analysis of ferrous materials. Analysis of ferro-silicon. Determination of Si and Al by X-ray fluorescence spectrometry
      CORRIGENDUM 1
    • BS EN ISO 10523:2012 Water quality. Determination of pH
      CORRIGENDUM 1
    • BS EN ISO 10580:2012 Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions
      CORRIGENDUM 1
    • BS EN ISO 10874:2012 Resilient, textile and laminate floor coverings. Classification
      CORRIGENDUM 1
    • BS EN 13081:2008+A1:2012 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour collection adaptor and coupler
      AMENDMENT 1
    • BS EN 13082:2008+A1:2012 Tanks for transport of dangerous goods. Service equipment for tanks. Vapour transfer valve
      AMENDMENT 1
    • BS EN ISO 15609-5:2011 Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Resistance welding
      CORRIGENDUM 1
    • BS EN 15725:2010 Extended application reports on the fire performance of construction products and building elements
      CORRIGENDUM 1
    • BS EN ISO 16265:2012 Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
      CORRIGENDUM 1
    • BS EN ISO 23953-1:2005+A1:2012 Refrigerated display cabinets. Vocabulary
      AMENDMENT 1
    • BS EN ISO 23996:2012 Resilient floor coverings. Determination of density
      CORRIGENDUM 1
    • BS EN ISO 24340:2012 Resilient floor coverings. Determination of thickness of layers
      CORRIGENDUM 1
    • BS EN ISO 24344:2012 Resilient floor coverings. Determination of flexibility and deflection
      CORRIGENDUM 1
    • BS EN ISO 25539-2:2009 Cardiovascular implants. Endovascular devices. Vascular stents
      CORRIGENDUM 2
    • BS EN 50342-1:2006+A1:2011 Lead-acid starter batteries. General requirements and methods of test
      AMENDMENT 1
    • BS EN 60079-35-1:2011 Explosive atmospheres. Caplights for use in mines susceptible to firedamp. General requirements. Construction and testing in relation to the risk of explosion
      CORRIGENDUM 1
    • BS EN 60598-2-2:2012 Luminaires. Particular requirements. Recessed luminaires
      CORRIGENDUM 1
    • BS EN 60601-2-2:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
      AMENDMENT 11
    • BS EN 60601-2-19:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant incubators
      AMENDMENT 11
    • BS EN 60601-2-37:2008+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
      AMENDMENT 11
    • BS EN 60601-2-41:2009+A11:2011 Medical electrical equipment. Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis
      AMENDMENT 11
    • BS EN 60601-2-50:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant phototherapy equipment
      AMENDMENT 11
    • BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
      CORRIGENDUM 3
    • BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
      CORRIGENDUM 1
    • BS EN 62040-2:2006 Uninterruptible power systems (UPS). Electromagnetic compatibility (EMC) requirements
      CORRIGENDUM 2
    • BS ISO 355:2007+A1:2012 Rolling bearings. Tapered roller bearings. Boundary dimensions and series designations
      AMENDMENT 1
    • BS ISO 7199:2009+A1:2012 Cardiovascular implants and artificial organs. Blood-gas exchangers (oxygenators)
      AMENDMENT 1
    • BS ISO/IEC 13211-1:1995 Information technology. Programming languages. Prolog. General core
      CORRIGENDUM 1
    • BS ISO/IEC 14143-1:2007 Information technology. Software measurement. Functional size measurement. Definition of concepts
      CORRIGENDUM 1
    • PD IEC/TR 60344:2007 Calculation of D.C. resistance of plain and coated copper conductors of low-frequency cables and wires. Application guide
      CORRIGENDUM 1

    British Standards withdrawn

    • BS 4800:1989 Schedule of paint colours for building purposes
      Superseded by BS 4800:2011
    • BS 5454:2000 Recommendations for the storage and exhibition of archival documents
      Superseded by PD 5454:2012
    • BS 5499-6:2002 Graphical symbols and signs. Safety signs, including fire safety signs. Creation and design of graphical symbols for use in safety signs. Requirements
      Superseded by BS ISO 3864-3:2012
    • BS 7755-4.3.1:1994 (ISO 11269-1:1993) Soil quality. Biological methods. Effects of pollutants on soil flora. Method for the measurement of inhibition of root growth
      Superseded by BS ISO 11269-1:2012
    • DD 243:2004 Installation and configuration of intruder alarm systems designed to generate confirmed alarm conditions. Code of practice
      Superseded by BS 8243:2010
    • BS EN 426:1993 Resilient floor coverings. Determination of width, length, straightness and flatness of sheet material
      Superseded by BS EN ISO 24341:2012
    • BS EN 429:1993 Resilient floor coverings. Determination of the thickness of layers
      Superseded by BS EN ISO 24340:2012
    • BS EN 435:1994 Resilient floor coverings. Determination of flexibility
      Superseded by BS EN ISO 24344:2012
    • BS EN 436:1994 Resilient floor coverings. Determination of density
      Superseded by BS EN ISO 23996:2012
    • BS EN 548:2011 Resilient floor coverings. Specification for plain and decorative linoleum
      Superseded by BS EN ISO 24011:2012
    • BS EN 685:2007 Resilient, textile and laminate floor coverings. Classification
      Superseded by BS EN ISO 10874:2012
    • BS EN ISO 898-6:1996 Mechanical properties of fasteners. Nuts with specified proof load values. Fine pitch thread
      Superseded by BS EN ISO 898-2:2012
    • BS EN ISO 1133:2005 Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
      Superseded by BS EN ISO 1133-1:2011 and BS EN ISO 1133-2:2011
    • DD ENV 1451-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
      Superseded by PD CEN/TS 1451-2:2012
    • DD ENV 1519-2:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
      Superseded by PD CEN/TS 1519-2:2012
    • BS EN 1600:1997 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification
      Superseded by BS EN ISO 3581:2012
    • BS EN 1854:2006 Pressure sensing devices for gas burners and gas burning appliances
      Superseded by BS EN 1854:2010
    • BS EN ISO 9241-17:1998 Ergonomic requirements for office work with visual display terminals (VDTs). Form-filling dialogues
      Superseded by BS EN ISO 9241-143:2012
    • BS EN ISO 11446:2004 Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13- pole connectors for vehicles with 12 V nominal supply voltage
      Superseded by BS ISO 11446-1:2012
    • DD ENV 12108:2001 Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption
      Superseded by PD CEN/TR 12108:2012
    • BS EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum explosion pressure
      Superseded by BS EN 15967:2011
    • BS EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours. Determination of the maximum rate of explosion pressure rise
      Superseded by BS EN 15967:2011
    • BS EN 14327:2003 Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather
      Superseded by BS EN ISO 17076-1:2012
    • BS EN 14362-2:2003 Textiles. Methods for the determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible by extracting the fibres
      Superseded by BS EN 14362-1:2012
    • DD CEN/TS 14632:2006 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP)
      Superseded by PD CEN/TS 14632:2012
    • BS EN 20898-2:1994 (ISO 898-2:1992) Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread
      Superseded by BS EN ISO 898-2:2012
    • BS EN ISO 26082:2007 Leather. Physical and mechanical tests. Determination of soiling with rubbing for automotive leather
      Superseded by BS EN ISO 26082-1:2012
    • BS EN 55014-1:2006 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission
      Superseded by BS EN 55014-1:2006+A1:2009
    • BS EN 60034-15:1996 Rotating electrical machines. Impulse voltage withstand levels of rotating A.C. machines with form-wound stator coils
      Superseded by BS EN 60034-15:2009
    • BS EN 60044-5:2004 Instrument transformers. Capacitor voltage transformers
      Superseded by BS EN 61869-5:2011
    • BS EN 60601-2-44:2001 (BS 5724-2.44:2001) Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of X-ray equipment for computed tomography
      Superseded by BS EN 60601-2-44:2009
    • BS EN 60601-2-50:2002 Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of infant phototherapy equipment
      Superseded by BS EN 60601-2-50:2009
    • BS EN 60745-2-1:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for drills and impact drills
      Superseded by BS EN 60745-2-1:2003+A1:2009
    • BS EN 60745-2-2:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for screwdrivers and impact wrenches
      Superseded by BS EN 60745-2-2:2003+A1:2009
    • BS EN 60745-2-4:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
      Superseded by BS EN 60745-2-4:2003+A1:2009
    • BS EN 60745-2-4:2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
      Superseded by BS EN 60745-2-4:2009
    • BS EN 60745-2-6:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for hammers
      Superseded by BS EN 60745-2-6:2003+A2:2009
    • BS EN 60745-2-6:2003+A2:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for hammers
      Superseded by BS EN 60745-2-6:2003+A12:2009
    • BS EN 60745-2-8:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers
      Superseded by BS EN 60745-2-8:2003+A1:2009
    • BS EN 60745-2-8:2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers
      Superseded by BS EN 60745-2-8:2009
    • BS EN 60745-2-11:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws)
      Superseded by BS EN 60745-2-11:2003+A1:2009
    • BS EN 60745-2-20:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for band saws
      Superseded by BS EN 60745-2-20:2003+A1:2009
    • BS EN 60745-2-20:2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for band saws
      Superseded by BS EN 60745-2-20:2009
    • BS EN 61770:1999+A2:2006 Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
      Superseded by BS EN 61770:2009
    • BS EN 62305-1:2006 Protection against lightning. General principles
      Superseded by BS EN 62305-1:2011
    • BS EN 62305-3:2006 Protection against lightning. Physical damage to structures and life hazard
      Superseded by BS EN 62305-3:2011
    • BS EN 62305-4:2006 Protection against lightning. Electrical and electronic systems within structures
      Superseded by BS EN 62305-4:2011
    • PD ISO/IEC TR 9294:2005 Information technology. Guidelines for the management of software documentation
      Superseded by BS ISO/IEC 26511:2011
    • BS ISO/IEC 15026:1998 Information technology. System and software integrity levels
      Superseded by BS ISO/IEC 15026-3:2011 and PD ISO/IEC TR 15026-1:2010
    • DD ISO/TS 19072-3:2008 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. Type 1
      Superseded by PD ISO/TS 19072-3:2012
    • BS ISO 20806:2009 Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
      Superseded by BS ISO 21940-13:2012
    • BS ISO 24341:2006 Resilient and textile floor coverings. Determination of length, width and straightness of sheet
      Superseded by BS EN ISO 24341:2012
    • PD 0024:2001 Archival documents. Guide to the interpretation of BS 5454:2000. Storage and exhibition of archival documents
      Superseded by PD 5454:2012
    • PD 6662:2004 Scheme for the application of European Standards for intruder and hold-up alarm Systems
      Superseded by PD 6662:2010
    eafety. Particular requirements for screwdrivers and impact wrenches

    Superseded by BS EN 60745-2-2:2003+A1:2009
  • BS EN 60745-2-4:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
    Superseded by BS EN 60745-2-4:2003+A1:2009
  • BS EN 60745-2-4:2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
    Superseded by BS EN 60745-2-4:2009
  • BS EN 60745-2-6:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for hammers
    Superseded by BS EN 60745-2-6:2003+A2:2009
  • BS EN 60745-2-6:2003+A2:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for hammers
    Superseded by BS EN 60745-2-6:2003+A12:2009
  • BS EN 60745-2-8:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers
    Superseded by BS EN 60745-2-8:2003+A1:2009
  • BS EN 60745-2-8:2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers
    Superseded by BS EN 60745-2-8:2009
  • BS EN 60745-2-11:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws)
    Superseded by BS EN 60745-2-11:2003+A1:2009
  • BS EN 60745-2-20:2003 Hand-held motor-operated electric tools. Safety. Particular requirements for band saws
    Superseded by BS EN 60745-2-20:2003+A1:2009
  • BS EN 60745-2-20:2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for band saws
    Superseded by BS EN 60745-2-20:2009
  • BS EN 61770:1999+A2:2006 Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
    Superseded by BS EN 61770:2009
  • BS EN 62305-1:2006 Protection against lightning. General principles
    Superseded by BS EN 62305-1:2011
  • BS EN 62305-3:2006 Protection against lightning. Physical damage to structures and life hazard
    Superseded by BS EN 62305-3:2011
  • BS EN 62305-4:2006 Protection against lightning. Electrical and electronic systems within structures
    Superseded by BS EN 62305-4:2011
  • PD ISO/IEC TR 9294:2005 Information technology. Guidelines for the management of software documentation
    Superseded by BS ISO/IEC 26511:2011
  • BS ISO/IEC 15026:1998 Information technology. System and software integrity levels
    Superseded by BS ISO/IEC 15026-3:2011 and PD ISO/IEC TR 15026-1:2010
  • DD ISO/TS 19072-3:2008 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pyrotechnic device and harness connector assembly. Type 1
    Superseded by PD ISO/TS 19072-3:2012
  • BS ISO 20806:2009 Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
    Superseded by BS ISO 21940-13:2012
  • BS ISO 24341:2006 Resilient and textile floor coverings. Determination of length, width and straightness of sheet
    Superseded by BS EN ISO 24341:2012
  • PD 0024:2001 Archival documents. Guide to the interpretation of BS 5454:2000. Storage and exhibition of archival documents
    Superseded by PD 5454:2012
  • PD 6662:2004 Scheme for the application of European Standards for intruder and hold-up alarm Systems
    Superseded by PD 6662:2010

Published in international.