BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 152:2011 Wood preservatives. Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service. Laboratory method
    Supersedes BS 7066-1:1990 and BS 7066-2:1990
  • BS EN 295-3:2012 Vitrified clay pipe systems for drains and sewers. Test methods
    Supersedes BS EN 295-3:1991
  • BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
    Supersedes BS EN 490:2004+A1:2006
  • BS EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
    Supersedes BS EN 491:2004
  • BS EN 498:2012 Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use contact grills included
    Supersedes BS EN 498:1998
  • BS EN 1267:2012 Industrial valves. Test of flow resistance using water as test fluid
    Supersedes BS EN 1267:1999
  • BS EN 1370:2011 Founding. Examination of surface condition
    Supersedes BS EN 12454:1998 and BS EN 1370:1997
  • BS EN 1428:2012 (BS 2000-291:2011) Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method
    Supersedes BS EN 1428:2000
  • BS EN ISO 1452-3:2010 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
    Supersedes BS EN ISO 1452-3:2009
  • BS EN 1540:2011 Workplace exposure. Terminology
    Supersedes BS EN 1540:1998
  • BS EN 1563:2011 Founding. Spheroidal graphite cast irons
    Supersedes BS EN 1563:1997
  • BS EN 1729-2:2012 Furniture. Chairs and tables for educational institutions. Safety requirements and test methods
    Supersedes BS EN 1729-2:2006
  • BS EN 1863-1:2011 Glass in building. Heat strengthened soda lime silicate glass. Definition and description
    Supersedes BS EN 1863-1:2000
  • BS EN 1971-1:2011 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an encircling test coil on the outer surface
    Supersedes BS EN 1971:1999
  • BS EN 1971-2:2011 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an internal probe on the inner surface
    Supersedes BS EN 1971:1999
  • BS EN 3155-076:2012 Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class R. Product standard
  • BS EN 3155-077:2012 Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class R. Product standard
  • BS EN ISO 3376:2011 Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
    Supersedes BS EN ISO 3376:2002
  • BS EN ISO 3377-1:2011 Leather. Physical and mechanical tests. Determination of tear load. Single edge tear
    Supersedes BS EN ISO 3377-1:2002
  • BS EN 4159:2011 Aerospace series. Paints and varnishes. Determination of resistance to microbial growth
  • BS EN 4171:2011 Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index
  • BS EN 4195:2011 Aerospace series. Paints and varnishes. Test method for determination of chromate leaching
  • BS EN 4540:2011 Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification
  • BS EN ISO 5402-1:2011 Leather. Determination of flex resistance. Flexometer method
    Supersedes BS EN ISO 5402:2002
  • BS EN ISO 5403-1:2011 Leather. Determination of water resistance of flexible leather. Repeated linear compression (penetrometer)
    Supersedes BS EN ISO 5403:2002
  • BS EN ISO 5403-2:2011 Leather. Determination of water resistance of flexible leather. Repeated angular compression (Maeser)
  • BS EN ISO 5404:2011 Leather. Physical test methods. Determination of water resistance of heavy leathers
    Supersedes BS EN ISO 5404:2002
  • BS EN 6059-503:2012 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise due to rated current injected on the sleeve
  • BS EN ISO 7887:2011 Water quality. Examination and determination of colour
    Supersedes BS EN ISO 7887:1995
  • BS EN 10218-1:2012 Steel wire and wire products. General. Test methods
    Supersedes BS EN 10218-1:1994
  • BS EN 10218-2:2012 Steel wire and wire products. General. Wire dimensions and tolerances
    Supersedes BS EN 10218-2:1997
  • BS EN 10264-1:2012 Steel wire and wire products. Steel wire for ropes. General requirements
    Supersedes BS EN 10264-1:2002
  • BS EN 10264-2:2012 Steel wire and wire products. Steel wire for ropes. Cold drawn non alloy steel wire for ropes for general applications
    Supersedes BS EN 10264-2:2002
  • BS EN 10264-3:2012 Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications
    Supersedes BS EN 10264-3:2002
  • BS EN 10264-4:2012 Steel wire and wire products. Steel wire for ropes. Stainless steel wire
    Supersedes BS EN 10264-4:2002
  • BS EN ISO 10619-1:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
    Supersedes BS EN ISO 1746:2001
  • BS EN ISO 10619-2:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
    Supersedes BS EN ISO 4672:1999
  • BS EN ISO 10685-1:2011 Ophthalmic optics. Spectacle frames and sunglasses electronic catalogue and identification. Product identification and electronic catalogue product hierarchy
  • BS EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
    Supersedes BS EN ISO 11127-1:1998
  • BS EN ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
    Supersedes BS EN ISO 11127-3:1998
  • BS EN ISO 11148-8:2011 Hand-held non-electric power tools. Safety requirements. Sanders and polishers
    Supersedes BS EN 792-8:2001+A1:2008 which remains current
  • BS EN ISO 11148-10:2011 Hand-held non-electric power tools. Safety requirements. Compression power tools
    Supersedes BS EN 792-10:2000+A1:2008 which remains current
  • BS EN ISO 11148-11:2011 Hand-held non-electric power tools. Safety requirements. Nibblers and shears
    Supersedes BS EN 792-11:2000+A1:2008 which remains current
  • BS EN ISO 11372:2011 Gas cylinders. Acetylene cylinders. Filling conditions and filling inspection
    Supersedes BS EN 12754:2002 and BS EN 1801:1999
  • BS EN ISO 11680-1:2011 Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Machines fitted with an integral combustion engine
    Supersedes BS EN ISO 11680-1:2008
  • BS EN ISO 11746:2012 Rice. Determination of biometric characteristics of kernels
  • BS EN 12226:2012 Geosynthetics. General tests for evaluation following durability testing
    Supersedes BS EN 12226:2000
  • BS EN 12952-3:2011 Water-tube boilers and auxiliary installations. Design and calculation for pressure parts of the boiler
    Supersedes BS EN 12952-3:2001
  • BS EN 13024-1:2011 Glass in building. Thermally toughened borosilicate safety glass. Definition and description
    Supersedes BS EN 13024-1:2002
  • BS EN ISO 13123:2011 Metallic and other inorganic coatings. Test method of cyclic heating for thermal-barrier coatings under temperature gradient
  • BS EN ISO 13138:2012 Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
  • BS EN 13172:2012 Thermal insulation products. Evaluation of conformity
    Supersedes BS EN 13172:2008
  • BS EN 13224:2011 Precast concrete products. Ribbed floor elements
    Supersedes BS EN 13224:2004
  • BS EN 13231-3:2012 Railway applications. Track. Acceptance of works. Acceptance of reprofiling rails in track
    Supersedes BS EN 13231-3:2006
  • BS EN 13523-20:2011 Coil coated metals. Test methods. Foam adhesion
    Supersedes BS EN 13523-20:2004
  • BS EN ISO 13628-4:2010 Petroleum and natural gas Industries. Design and operation of subsea production systems. Subsea wellhead and tree equipment
    Supersedes BS EN ISO 13628-4:1999
  • BS EN ISO 13678:2012 Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
    Supersedes BS EN ISO 13678:2009
  • BS EN 13772:2011 Textiles and textile products. Burning behaviour. Curtains and drapes. Measurement of flame spread of vertically oriented specimens with large ignition source
    Supersedes BS EN 13772:2003
  • BS EN 13835:2012 Founding. Austenitic cast irons
    Supersedes BS EN 13835:2002
  • BS EN 15221-4:2011 Facility management. Taxonomy, classification and structures in facility management
  • BS EN 15232:2012 Energy performance of buildings. Impact of Building Automation, Controls and Building Management
    Supersedes BS EN 15232:2007
  • BS EN 15234-2:2012 Solid biofuels. Fuel quality assurance. Wood pellets for non-industrial use
  • BS EN 15234-3:2012 Solid biofuels. Fuel quality assurance. Wood briquettes for non-industrial use
  • BS EN 15234-4:2012 Solid biofuels. Fuel quality assurance. Wood chips for non-industrial use
  • BS EN 15234-5:2012 Solid biofuels. Fuel quality assurance. Firewood for non-industrial use
  • BS EN 15234-6:2012 Solid biofuels. Fuel quality assurance. Nonwoody pellets for non-industrial use
  • BS EN 15492:2012 (BS 2000-563:2011) Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
    Supersedes BS EN 15492:2008
  • BS EN 15643-3:2012 Sustainability of construction works. Assessment of buildings. Framework for the assessment of social performance
  • BS EN 15643-4:2012 Sustainability of construction works. Assessment of buildings. Framework for the assessment of economic performance
  • BS EN ISO 15883-6:2011 Washer-disinfectors. Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
  • BS EN 15939:2011 Hardware for furniture. Strength and loading capacity of wall attachment devices
  • BS EN 16027:2011 Protective clothing. Gloves with protective effect for association football goal keepers
  • BS EN 16051-1:2012 Inflation devices and accessories for inflatable consumer products. Compatibility of valves and valve adapters
  • BS EN 16051-2:2012 Inflation devices and accessories for inflatable consumer products. Safety requirements, durability, performance, compatibility and test methods of inflators
  • BS EN 16055:2012 Leather. Raw bovine hides and skins. Description, presentation and preservation
  • BS EN 16063:2011 Packaging. Rigid plastic containers. Nomenclature of plastic finishes
  • BS EN 16064:2011 Packaging. Rigid plastic containers. PET finish 30/25 High (18,5)
  • BS EN 16065:2011 Packaging. Rigid plastic containers. PET finish 30/25 Low (16,8)
  • BS EN 16066:2011 Packaging. Rigid plastic containers. PET finish 26,7 (lead 6,35)
  • BS EN 16067:2011 Packaging. Rigid plastic containers. PET finish 26,7 (lead 9,00)
  • BS EN 16068:2011 Packaging. Rigid plastic containers. PET finish 38
  • BS EN 16083:2012 Paddles and oars for recreational boats. Safety requirements and test methods
  • BS EN 16094:2012 Laminate floor coverings. Test method for the determination of micro-scratch resistance
  • BS EN 16135:2011 (BS 2000-588:2011) Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
  • BS EN 16136:2011 (BS 2000-589:2011) Automotive fuels. Determination of manganese content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
  • BS EN ISO 17186:2011 Leather. Physical and mechanical tests. Determination of surface coating thickness
    Supersedes BS EN ISO 17186:2002
  • BS EN ISO 17235:2011 Leather. Physical and mechanical tests. Determination of softness
    Supersedes BS EN ISO 17235:2002
  • BS EN ISO 17450-1:2011 Geometrical product specifications (GPS). General concepts. Model for geometrical specification and verification
    Supersedes DD CEN ISO/TS 17450-1:2007
  • BS EN ISO 20344:2011 Personal protective equipment. Test methods for footwear
    Supersedes BS EN ISO 20344:2004
  • BS EN ISO 20345:2011 Personal protective equipment. Safety footwear
    Supersedes BS EN ISO 20345:2004
  • BS EN ISO 22007-1:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
  • BS EN ISO 22007-2:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
  • BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
  • BS EN ISO 22007-4:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method
  • BS EN ISO 22867:2011 Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
    Supersedes BS EN ISO 22867:2008
  • BS EN ISO 24342:2012 Resilient and textile floor-coverings. Determination of side length, edge, straightness and squareness of tiles
    Supersedes BS EN 427:1994
  • BS EN ISO 25239-1:2011 Friction stir welding. Aluminium. Vocabulary
  • BS EN ISO 25239-2:2011 Friction stir welding. Aluminium. Design of weld joints
  • BS EN ISO 25239-3:2011 Friction stir welding. Aluminium. Qualification of welding operators
  • BS EN ISO 25239-4:2011 Friction stir welding. Aluminium. Specification and qualification of welding procedures
  • BS EN ISO 25239-5:2011 Friction stir welding. Aluminium. Quality and inspection requirements
  • BS EN ISO 26203-2:2011 Metallic materials. Tensile testing at high strain rates. Servo-hydraulic and other test systems
  • BS EN 50377-16-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
  • BS EN 50411-2-2:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed pan fibre splice closures Type 1, for category S & A
    Supersedes BS EN 50411-2-2:2007
  • BS EN 50411-2-3:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed inline fibre splice closures Type 1, for category S & A
    Supersedes BS EN 50411-2-3:2007
  • BS EN 50411-3-3:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Singlemode optical fibre fusion splice protectors
  • BS EN 50443:2011 Effects of electromagnetic interference on pipelines caused by high voltage A.C. electric traction systems and/or high voltage A.C. power supply systems
  • BS EN 50467:2011 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
    Supersedes DD CLC/TS 50467:2008
  • BS EN 50526-1:2012 Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices. Surge arresters
    Supersedes BS EN 50123-5:2003
  • BS EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
  • BS EN 60079-11:2012 Explosive atmospheres. Equipment protection by intrinsic safety “i”
    Supersedes BS EN 60079-11:2007 and BS EN 61241-11:2006 which are withdrawn. It partially Supersedes BS EN 60079-27:2008
  • BS EN 60335-2-53:2011 Household and similar electrical appliances. Safety. Particular requirements for sauna heating appliances and infrared cabins
    Supersedes BS EN 60335-2-53:2003 which remains current
  • BS EN 60475:2011 Method of sampling insulating liquids
    Supersedes BS 5263:1975
  • BS EN 60567:2011 Oil-filled electrical equipment. Sampling of gases and analysis of free and dissolved gases. Guidance
    Supersedes BS EN 60567:2005
  • BS EN 60683:2012 Industrial electroheating equipment. Test methods for submerged-arc furnaces
    Supersedes BS 7686:1993
  • BS EN 60695-11-4:2011 Fire hazard testing. Test flames. 50 W flame. Apparatus and confirmational test method
    Supersedes DD IEC/TS 60695-11-4:2004
  • BS EN 60704-2-10:2011 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these
    Supersedes BS EN 60704-2-10:2004 which remains current
  • BS EN 61000-3-12:2011 Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ?75 A per phase
    Supersedes BS EN 61000-3-12:2005 which remains current
  • BS EN 61148:2012 Terminal markings for valve device stacks and assemblies and for power conversion equipment
  • BS EN 61378-1:2011 Convertor transformers. Transformers for industrial applications
    Supersedes BS EN 61378-1:1999 which remains current
  • BS EN 61394:2011 Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
    Supersedes PD IEC 61394:1997
  • BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
  • BS EN 61821:2011 Electrical installations for lighting and beaconing of aerodromes. Maintenance of aeronautical ground lighting constant current series circuits
    Supersedes BS EN 61821:2003
  • BS EN 62027:2012 Preparation of object lists, including parts lists
    Supersedes BS EN 62027:2001
  • BS EN 62271-200:2012 High-voltage switchgear and controlgear. AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    Supersedes BS EN 62271-200:2004 which remains current
  • BS EN 62282-3-200:2012 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
    Supersedes BS EN 62282-3-2:2006
  • BS EN 62549:2011 Articulated systems and flexible systems for cable guiding

BS ENs implemented by amendment

  • BS EN ISO 18857-2:2011 Water quality. Determination of selected alkylphenols. Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in nonfiltered samples following solid-phase extraction and derivatisation
    Implementation of European Standard EN ISO 18557-2 by amendment to BS ISO 18857-2:2009
  • BS EN ISO 50001:2011 Energy management systems. Requirements with guidance for use
    Implementation of European Standard EN ISO 50001 by amendment to BS ISO 50001:2011

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 37:2011 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
    Supersedes BS ISO 37:2005
  • BS ISO 3364:2011 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole. Dimensions
    Supersedes BS 4193-3:1997
  • BS ISO 3384-1:2011 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing at constant temperature
    Supersedes BS ISO 3384:2005
  • BS ISO 3567:2011 Vacuum gauges. Calibration by direct comparison with a reference gauge
  • BS ISO 4381:2011 Plain bearings. Tin casting alloys for multilayer plain bearings
    Supersedes BS ISO 4381:2000
  • BS ISO 4901:2011 Reinforced plastics based on unsaturated polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
    Supersedes BS 2782-4:Method 432A:1991
  • BS ISO 5291:2011 Belt drives. Grooved pulleys for joined classical V-belts. Groove sections AJ, BJ, CJ and DJ (effective system)
  • BS ISO 6072:2011 Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
    Supersedes BS ISO 6072:2002
  • BS ISO 8332:2011 Rubber compounding ingredients. Sulfur. Methods of test
    Supersedes BS ISO 8332:2006
  • BS ISO 8535-1:2011 Diesel engines. Steel tubes for high-pressure fuel injection pipes. Requirements for seamless cold-drawn single-wall tubes
    Supersedes BS ISO 8535-1:2006
  • BS ISO 8855:2011 Road vehicles. Vehicle dynamics and roadholding ability. Vocabulary
    Supersedes BS AU 244:1992
  • BS ISO 9361-2:2011 Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Dimensions of inserts with cylindrical fixing hole
    Supersedes BS 4193-20:1993
  • BS ISO/IEC 9797-3:2011 Information technology. Security techniques. Message Authentication Codes (MACs). Mechanisms using a universal hash-function
  • BS ISO 10159:2011 Health informatics. Messages and communication. Web access reference manifest
  • BS ISO 10711:2012 Intelligent Transport Systems. Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
  • BS ISO 10784-1:2011 Space systems. Early operations. Spacecraft initialization and commissioning
  • BS ISO 10784-3:2011 Space systems. Early operations. Commissioning report
  • BS ISO 10803:2011 Design method for ductile iron pipes
  • BS ISO 11039:2012 Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate
  • BS ISO/IEC 11770-5:2011 Information technology. Security techniques. Key management. Group key management
  • BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
  • BS ISO 13082:2011 Milk and milk products. Determination of the lipase activity of pregastric lipase preparation
  • BS ISO 13088:2011 Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection
  • BS ISO 13314:2011 Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals
  • BS ISO 13400-3:2011 Road vehicles. Diagnostic communication over Internet Protocol (DoIP). Wired vehicle interface based on IEEE 802.3
  • BS ISO 13970:2011 Recreational diving services. Requirements for the training of recreational snorkelling guides
  • BS ISO 14470:2011 Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
  • BS ISO/IEC 14651:2011 Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering
    Supersedes BS ISO/IEC 14651:2007+A1:2009
  • BS ISO 14932:2012 Rubber compounding ingredients. Organic vulcanizing agents. Determination of organic peroxide content
  • BS ISO 15081:2011 Agricultural equipment. Graphical symbols for pressurized irrigation systems
    Supersedes BS ISO 15081:2005
  • BS ISO 16172:2011 Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
    Supersedes BS ISO 16172:2006
  • BS ISO 16589-2:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Vocabulary
    Supersedes BS ISO 16589-2:2001
  • BS ISO 16817:2012 Building environment design. Indoor environment. Design process for visual environment
  • BS ISO 17214:2011 Space data and information transfer systems. Spacecraft onboard interface services. Time access service
  • BS ISO/IEC 18031:2011 Information technology. Security techniques. Random bit generation
    Supersedes BS ISO/IEC 18031:2005
  • BS ISO/IEC 18033-4:2011 Information technology. Security techniques. Encryption algorithms. Stream ciphers
    Supersedes BS ISO/IEC 18033-4:2005+A1:2009
  • BS ISO/IEC 18047-2:2012 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications below 135 kHz
    Supersedes PD ISO/IEC TR 18047-2:2006
  • BS ISO 18132-1:2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank gauges. Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage
    Supersedes BS ISO 18132-1:2006
  • BS ISO 18132-3:2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank gauges. Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
    Supersedes BS ISO 18132-1:2006
  • BS ISO 18946:2011 Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
  • BS ISO/IEC 19794-2:2011 Information technology. Biometric data interchange formats. Finger minutiae data
    Supersedes BS ISO/IEC 19794-2:2005+A1:2010
  • BS ISO/IEC 19794-4:2011 Information technology. Biometric data interchange formats. Finger image data
    Supersedes BS ISO/IEC 19794-4:2005
  • BS ISO/IEC 19794-8:2011 Information technology. Biometric data interchange formats. Finger pattern skeletal data
    Supersedes BS ISO/IEC 19794-8:2006
  • BS ISO 19893:2011 Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
  • BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process. Residential applications
  • BS ISO/IEC 24760-1:2011 Information technology. Security techniques. A framework for identity management. Terminology and concepts
  • BS ISO 25297-2:2011 Optics and photonics. Electronic exchange of optical data. Mapping to the classes and properties defined in ISO 23584
  • BS ISO/IEC 27006:2011 Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
    Supersedes BS ISO/IEC 27006:2007
  • BS ISO 28961:2012 Acoustics. Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under freefield listening conditions
  • BS ISO/IEC 29109-8:2011 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Finger pattern skeletal data
  • BS ISO/IEC 29128:2011 Information technology. Security techniques. Verification of cryptographic protocols
  • BS ISO/IEC 29150:2011 Information technology. Security techniques. Signcryption
  • BS ISO/IEC 29192-2:2012 Information technology. Security techniques. Lightweight cryptography. Block ciphers
  • BS ISO/IEC 29500 PARTS 1-4:2011 Information technology. Document description and processing languages. Office Open XML File Formats
  • BS ISO/IEC 40210:2011 Information technology. W3C SOAP Version 1.2. Messaging Framework (Second Edition)
  • BS ISO/IEC 40220:2011 Information technology. W3C SOAP Version 1.2. Adjuncts
  • BS ISO/IEC 40240:2011 Information technology. W3C Web Services Addressing 1.0. Core
  • BS ISO/IEC 40250:2011 Information technology. W3C Web Services Addressing 1.0. SOAP Binding
  • BS ISO/IEC 40260:2011 Information technology. W3C Web Services Addressing 1.0. Metadata
  • BS ISO/IEC 40270:2011 Information technology. W3C Web Services Policy 1.5. Framework
  • BS ISO/IEC 40280:2011 Information technology. W3C Web Services Policy 1.5. Attachment
  • BS IEC 60076-21:2011 Power transformers. Standard requirements, terminology, and test code for step-voltage regulators
  • BS IEC 60493-1:2011 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
    Supersedes BS 7826-1:1995
  • BS IEC/IEEE 62582-1:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. General
  • BS IEC/IEEE 62582-2:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Indenter modulus
  • BS IEC/IEEE 62582-4:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Oxidation induction techniques
  • BS IEC 62613-2:2011 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSCSYSTEMS). Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships

Published documents

  • PD ISO/TR 10929:2012 Nanotechnologies. Characterization of multiwall carbon nanotube (MWCNT) samples
  • PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal exposure. Principles and methods
  • PD CEN/TR 16303-4:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Validation Procedures
  • PD ISO/TR 23081-3:2011 Information and documentation. Managing metadata for records. Self-assessment method
  • PD ISO/IEC TR 29166:2011 Information technology. Document description and processing languages. Guidelines for translation between ISO/IEC 26300 and ISO/IEC 29500 document formats
  • PD CEN/CLC/ETSI TR 50572:2011 Functional reference architecture for communications in smart metering systems
  • PD IEC/TR 62627-03-02:2011 Fibre optic interconnecting devices and passive components. Reliability. Report of high power transmission test of specified passive optical components
  • PD IEC/TR 62732:2012 Three-digit-code for designation of colour rendering and correlated colour temperature

Publicly available specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 97:2012 A specification for mail screening and security
    Supersedes PAS 97:2009
  • PAS 107:2012 Specification for the manufacture and storage of size reduced tyre materials
    Supersedes PAS 107:2007

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 8541-2:2011 Library objects for architecture, engineering and construction. Recommended 2D symbols of building elements for use in building information modelling
    CORRIGENDUM 1
  • BS EN 30-1-1:2008+A2:2010 Domestic cooking appliances burning gas. Safety. General
    CORRIGENDUM 1
  • BS EN 558:2008+A1:2011 Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
    AMENDMENT 1
  • BS EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components
    AMENDMENT 1
  • BS EN 1492-2:2000+A1:2008 Textile slings. Safety. Roundslings made of manmade fibres, for general purpose use
    CORRIGENDUM 2
  • BS EN ISO 1518-2:2011 Paints and varnishes. Determination of scratch resistance. Variable-loading method
    CORRIGENDUM 1
  • BS EN 3475-603:2011 Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to wet arc tracking
    CORRIGENDUM 1
  • BS EN ISO 6360-2:2004+A1:2011 Dentistry. Number coding system for rotary instruments. Shapes
    AMENDMENT 1
  • BS EN ISO 6887-4:2003+A1:2011 Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products
    AMENDMENT 1
  • BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
    CORRIGENDUM 1
  • BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
    CORRIGENDUM 1
  • BS EN 10245-4:2011 Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
    CORRIGENDUM 1
  • BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire. Polyamide coated wire
    CORRIGENDUM 1
  • BS EN ISO 11148-2:2011 Hand-held non-electric power tools. Safety requirements. Cutting-off and crimping power tools
    CORRIGENDUM 1
  • BS EN 12059:2008+A1:2011 Natural stone products. Dimensional stone work. Requirements
    AMENDMENT 1
  • BS EN 12201-2:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Pipes
    CORRIGENDUM 1
  • BS EN 13157:2004+A1:2009 Cranes. Safety. Hand powered cranes
    AMENDMENT 1
  • BS EN 14033-2:2008+A1:2011 Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for working
    AMENDMENT 1
  • BS EN 14844:2006+A2:2011 Precast concrete products. Box culverts
    AMENDMENT 2
  • BS EN 15440:2011 Solid recovered fuels. Methods for the determination of biomass content
    CORRIGENDUM 1
  • BS EN 15649-1:2009+A1:2012 Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods
    AMENDMENT 1
  • BS EN 15649-2:2009+A1:2012 Floating leisure articles for use on and in the water. Consumer information
    AMENDMENT 1
  • BS EN 15695-2:2009 Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances. Filters, requirements and test procedures
    CORRIGENDUM 1
  • BS EN ISO 15927-5:2004+A1:2011 Hygrothermal performance of buildings. Calculation and presentation of climatic data. Data for design heat load for space heating
    AMENDMENT 1
  • BS EN 15978:2011 Sustainability of construction works. Assessment of environmental performance of buildings. Calculation method
    CORRIGENDUM 1
  • BS EN 16016-3:2011 Non destructive testing. Radiation methods. Computed Tomography. Operation and interpretation
    CORRIGENDUM 1
  • BS EN 16147:2011 Heat pumps with electrically driven compressors. Testing and requirements for marking of domestic hot water units
    CORRIGENDUM 1
  • BS EN ISO 18286:2010 Hot-rolled stainless steel plates. Tolerances on dimensions and shape
    CORRIGENDUM 1
  • BS EN ISO 18857-2:2011 Water quality. Determination of selected alkylphenols. Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in nonfiltered samples following solid-phase extraction and derivatisation
    CORRIGENDUM 1
  • BS EN ISO 19011:2011 Guidelines for auditing management systems
    CORRIGENDUM 1
  • BS EN ISO 22476-2:2005+A1:2011 Geotechnical investigation and testing. Field testing. Dynamic probing
    AMENDMENT 1
  • BS EN ISO 22476-3:2005+A1:2011 Geotechnical investigation and testing. Field testing. Standard penetration test
    AMENDMENT 1
  • BS EN ISO 50001:2011 Energy management systems. Requirements with guidance for use
    CORRIGENDUM 1
  • BS EN 60603-7:2009+A1:2011 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors
    AMENDMENT 1
  • BS EN 60730-2-7:2010 Automatic electrical controls for household and similar use. Particular requirements for timers and time switches
    CORRIGENDUM 1
  • BS EN 60745-2-4:2009+A11:2011 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
    AMENDMENT 11
  • BS EN 60851-5:2008+A1:2011 Winding wires. Test methods. Electrical properties
    CORRIGENDUM 1
  • BS EN 60950-1:2006+A12:2011 Information technology equipment. Safety. General requirements
    CORRIGENDUM 5
  • BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
    CORRIGENDUM 2
  • BS EN 61937-2:2007+A1:2011 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Burst-info
    AMENDMENT 1
  • BS EN 62549:2011 Articulated systems and flexible systems for cable guiding
    CORRIGENDUM 1
  • BS EN 140401-804:2011 Detail Specification: Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25
    CORRIGENDUM 1
  • BS ISO 4190-1:2010 Lift (Elevator) installation. Class I, II, III and VI lifts
    CORRIGENDUM 1
  • BS ISO 4251-2:2005+A1:2011 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre load ratings
    AMENDMENT 1
  • BS ISO 5658-2:2006+A1:2011 Reaction to fire tests. Spread of flame. Lateral spread on building and transport products in vertical configuration
    AMENDMENT 1
  • BS ISO/IEC 10118-2:2010 Information technology. Security techniques. Hash-functions. Hash-functions using an n-bit block cipher
    CORRIGENDUM 1
  • BS ISO/IEC 14443-3:2011+A1:2011 Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision
    AMENDMENT 1
  • BS ISO/IEC 18013-2:2008 Information technology. Personal identification. ISO-compliant driving licence. Machine-readable technologies
    CORRIGENDUM 1
  • BS ISO/IEC 18013-3:2009 Information technology. Personal Identification. ISO compliant driving licence. Access control, authentication and integrity validation
    CORRIGENDUM 1
  • BS ISO 19005-1:2005 Document management. Electronic document file format for long-term preservation. Use of PDF 1.4 (PDF/A-1)
    CORRIGENDUM 2
  • BS ISO/IEC 19757-8:2008 Information technology. Document Schema Definition Languages (DSDL). Document Semantics Renaming Language (DSRL)
    CORRIGENDUM 1
  • BS ISO/IEC 24754-1:2008 Information technology. Document description and processing languages. Minimum requirements for specifying document rendering systems. Feature specifications for document rendering systems
    CORRIGENDUM 1
  • BS ISO/IEC 26300:2006 Information technology. Open Document Format for Office Applications (OpenDocument) v1.0
    CORRIGENDUM 2

British Standards withdrawn

  • BS 2782-4:Method 432A:1991 (ISO 4901:1985) Methods of testing plastics. Chemical properties. Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins
    Superseded by BS ISO 4901:2011
  • BS 4193-3:1997 (ISO 3364:1997) Hardmetal insert tooling. Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole
    Superseded by BS ISO 3364:201
  • BS 4193-20:1993 (ISO 9361-2:1991) Hardmetal insert tooling. Specification for dimensions of ceramic inserts with rounded corners with fixing hole
    Superseded by BS ISO 9361-2:2011
  • BS 5263:1975 Method for sampling liquid dielectrics
    Superseded by BS EN 60475:2011
  • BS 6366:1983 Specification for studs for rugby football boots
    Superseded by BS 6366:2011
  • BS 7066-1:1990 (EN 152-1:1988) Wood preservatives. Laboratory method f/s

    You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

    BS EN publications

    The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

    • BS EN 152:2011 Wood preservatives. Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service. Laboratory method
      Supersedes BS 7066-1:1990 and BS 7066-2:1990
    • BS EN 295-3:2012 Vitrified clay pipe systems for drains and sewers. Test methods
      Supersedes BS EN 295-3:1991
    • BS EN 490:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Product specifications
      Supersedes BS EN 490:2004+A1:2006
    • BS EN 491:2011 Concrete roofing tiles and fittings for roof covering and wall cladding. Test methods
      Supersedes BS EN 491:2004
    • BS EN 498:2012 Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use contact grills included
      Supersedes BS EN 498:1998
    • BS EN 1267:2012 Industrial valves. Test of flow resistance using water as test fluid
      Supersedes BS EN 1267:1999
    • BS EN 1370:2011 Founding. Examination of surface condition
      Supersedes BS EN 12454:1998 and BS EN 1370:1997
    • BS EN 1428:2012 (BS 2000-291:2011) Bitumen and bituminous binders. Determination of water content in bituminous emulsions. Azeotropic distillation method
      Supersedes BS EN 1428:2000
    • BS EN ISO 1452-3:2010 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
      Supersedes BS EN ISO 1452-3:2009
    • BS EN 1540:2011 Workplace exposure. Terminology
      Supersedes BS EN 1540:1998
    • BS EN 1563:2011 Founding. Spheroidal graphite cast irons
      Supersedes BS EN 1563:1997
    • BS EN 1729-2:2012 Furniture. Chairs and tables for educational institutions. Safety requirements and test methods
      Supersedes BS EN 1729-2:2006
    • BS EN 1863-1:2011 Glass in building. Heat strengthened soda lime silicate glass. Definition and description
      Supersedes BS EN 1863-1:2000
    • BS EN 1971-1:2011 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an encircling test coil on the outer surface
      Supersedes BS EN 1971:1999
    • BS EN 1971-2:2011 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes. Test with an internal probe on the inner surface
      Supersedes BS EN 1971:1999
    • BS EN 3155-076:2012 Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, male, type A, crimp, class R. Product standard
    • BS EN 3155-077:2012 Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, female, type A, crimp, class R. Product standard
    • BS EN ISO 3376:2011 Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
      Supersedes BS EN ISO 3376:2002
    • BS EN ISO 3377-1:2011 Leather. Physical and mechanical tests. Determination of tear load. Single edge tear
      Supersedes BS EN ISO 3377-1:2002
    • BS EN 4159:2011 Aerospace series. Paints and varnishes. Determination of resistance to microbial growth
    • BS EN 4171:2011 Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index
    • BS EN 4195:2011 Aerospace series. Paints and varnishes. Test method for determination of chromate leaching
    • BS EN 4540:2011 Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification
    • BS EN ISO 5402-1:2011 Leather. Determination of flex resistance. Flexometer method
      Supersedes BS EN ISO 5402:2002
    • BS EN ISO 5403-1:2011 Leather. Determination of water resistance of flexible leather. Repeated linear compression (penetrometer)
      Supersedes BS EN ISO 5403:2002
    • BS EN ISO 5403-2:2011 Leather. Determination of water resistance of flexible leather. Repeated angular compression (Maeser)
    • BS EN ISO 5404:2011 Leather. Physical test methods. Determination of water resistance of heavy leathers
      Supersedes BS EN ISO 5404:2002
    • BS EN 6059-503:2012 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods. Temperature rise due to rated current injected on the sleeve
    • BS EN ISO 7887:2011 Water quality. Examination and determination of colour
      Supersedes BS EN ISO 7887:1995
    • BS EN 10218-1:2012 Steel wire and wire products. General. Test methods
      Supersedes BS EN 10218-1:1994
    • BS EN 10218-2:2012 Steel wire and wire products. General. Wire dimensions and tolerances
      Supersedes BS EN 10218-2:1997
    • BS EN 10264-1:2012 Steel wire and wire products. Steel wire for ropes. General requirements
      Supersedes BS EN 10264-1:2002
    • BS EN 10264-2:2012 Steel wire and wire products. Steel wire for ropes. Cold drawn non alloy steel wire for ropes for general applications
      Supersedes BS EN 10264-2:2002
    • BS EN 10264-3:2012 Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications
      Supersedes BS EN 10264-3:2002
    • BS EN 10264-4:2012 Steel wire and wire products. Steel wire for ropes. Stainless steel wire
      Supersedes BS EN 10264-4:2002
    • BS EN ISO 10619-1:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
      Supersedes BS EN ISO 1746:2001
    • BS EN ISO 10619-2:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
      Supersedes BS EN ISO 4672:1999
    • BS EN ISO 10685-1:2011 Ophthalmic optics. Spectacle frames and sunglasses electronic catalogue and identification. Product identification and electronic catalogue product hierarchy
    • BS EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
      Supersedes BS EN ISO 11127-1:1998
    • BS EN ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density
      Supersedes BS EN ISO 11127-3:1998
    • BS EN ISO 11148-8:2011 Hand-held non-electric power tools. Safety requirements. Sanders and polishers
      Supersedes BS EN 792-8:2001+A1:2008 which remains current
    • BS EN ISO 11148-10:2011 Hand-held non-electric power tools. Safety requirements. Compression power tools
      Supersedes BS EN 792-10:2000+A1:2008 which remains current
    • BS EN ISO 11148-11:2011 Hand-held non-electric power tools. Safety requirements. Nibblers and shears
      Supersedes BS EN 792-11:2000+A1:2008 which remains current
    • BS EN ISO 11372:2011 Gas cylinders. Acetylene cylinders. Filling conditions and filling inspection
      Supersedes BS EN 12754:2002 and BS EN 1801:1999
    • BS EN ISO 11680-1:2011 Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Machines fitted with an integral combustion engine
      Supersedes BS EN ISO 11680-1:2008
    • BS EN ISO 11746:2012 Rice. Determination of biometric characteristics of kernels
    • BS EN 12226:2012 Geosynthetics. General tests for evaluation following durability testing
      Supersedes BS EN 12226:2000
    • BS EN 12952-3:2011 Water-tube boilers and auxiliary installations. Design and calculation for pressure parts of the boiler
      Supersedes BS EN 12952-3:2001
    • BS EN 13024-1:2011 Glass in building. Thermally toughened borosilicate safety glass. Definition and description
      Supersedes BS EN 13024-1:2002
    • BS EN ISO 13123:2011 Metallic and other inorganic coatings. Test method of cyclic heating for thermal-barrier coatings under temperature gradient
    • BS EN ISO 13138:2012 Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
    • BS EN 13172:2012 Thermal insulation products. Evaluation of conformity
      Supersedes BS EN 13172:2008
    • BS EN 13224:2011 Precast concrete products. Ribbed floor elements
      Supersedes BS EN 13224:2004
    • BS EN 13231-3:2012 Railway applications. Track. Acceptance of works. Acceptance of reprofiling rails in track
      Supersedes BS EN 13231-3:2006
    • BS EN 13523-20:2011 Coil coated metals. Test methods. Foam adhesion
      Supersedes BS EN 13523-20:2004
    • BS EN ISO 13628-4:2010 Petroleum and natural gas Industries. Design and operation of subsea production systems. Subsea wellhead and tree equipment
      Supersedes BS EN ISO 13628-4:1999
    • BS EN ISO 13678:2012 Petroleum and natural gas industries. Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
      Supersedes BS EN ISO 13678:2009
    • BS EN 13772:2011 Textiles and textile products. Burning behaviour. Curtains and drapes. Measurement of flame spread of vertically oriented specimens with large ignition source
      Supersedes BS EN 13772:2003
    • BS EN 13835:2012 Founding. Austenitic cast irons
      Supersedes BS EN 13835:2002
    • BS EN 15221-4:2011 Facility management. Taxonomy, classification and structures in facility management
    • BS EN 15232:2012 Energy performance of buildings. Impact of Building Automation, Controls and Building Management
      Supersedes BS EN 15232:2007
    • BS EN 15234-2:2012 Solid biofuels. Fuel quality assurance. Wood pellets for non-industrial use
    • BS EN 15234-3:2012 Solid biofuels. Fuel quality assurance. Wood briquettes for non-industrial use
    • BS EN 15234-4:2012 Solid biofuels. Fuel quality assurance. Wood chips for non-industrial use
    • BS EN 15234-5:2012 Solid biofuels. Fuel quality assurance. Firewood for non-industrial use
    • BS EN 15234-6:2012 Solid biofuels. Fuel quality assurance. Nonwoody pellets for non-industrial use
    • BS EN 15492:2012 (BS 2000-563:2011) Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
      Supersedes BS EN 15492:2008
    • BS EN 15643-3:2012 Sustainability of construction works. Assessment of buildings. Framework for the assessment of social performance
    • BS EN 15643-4:2012 Sustainability of construction works. Assessment of buildings. Framework for the assessment of economic performance
    • BS EN ISO 15883-6:2011 Washer-disinfectors. Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment
    • BS EN 15939:2011 Hardware for furniture. Strength and loading capacity of wall attachment devices
    • BS EN 16027:2011 Protective clothing. Gloves with protective effect for association football goal keepers
    • BS EN 16051-1:2012 Inflation devices and accessories for inflatable consumer products. Compatibility of valves and valve adapters
    • BS EN 16051-2:2012 Inflation devices and accessories for inflatable consumer products. Safety requirements, durability, performance, compatibility and test methods of inflators
    • BS EN 16055:2012 Leather. Raw bovine hides and skins. Description, presentation and preservation
    • BS EN 16063:2011 Packaging. Rigid plastic containers. Nomenclature of plastic finishes
    • BS EN 16064:2011 Packaging. Rigid plastic containers. PET finish 30/25 High (18,5)
    • BS EN 16065:2011 Packaging. Rigid plastic containers. PET finish 30/25 Low (16,8)
    • BS EN 16066:2011 Packaging. Rigid plastic containers. PET finish 26,7 (lead 6,35)
    • BS EN 16067:2011 Packaging. Rigid plastic containers. PET finish 26,7 (lead 9,00)
    • BS EN 16068:2011 Packaging. Rigid plastic containers. PET finish 38
    • BS EN 16083:2012 Paddles and oars for recreational boats. Safety requirements and test methods
    • BS EN 16094:2012 Laminate floor coverings. Test method for the determination of micro-scratch resistance
    • BS EN 16135:2011 (BS 2000-588:2011) Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
    • BS EN 16136:2011 (BS 2000-589:2011) Automotive fuels. Determination of manganese content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
    • BS EN ISO 17186:2011 Leather. Physical and mechanical tests. Determination of surface coating thickness
      Supersedes BS EN ISO 17186:2002
    • BS EN ISO 17235:2011 Leather. Physical and mechanical tests. Determination of softness
      Supersedes BS EN ISO 17235:2002
    • BS EN ISO 17450-1:2011 Geometrical product specifications (GPS). General concepts. Model for geometrical specification and verification
      Supersedes DD CEN ISO/TS 17450-1:2007
    • BS EN ISO 20344:2011 Personal protective equipment. Test methods for footwear
      Supersedes BS EN ISO 20344:2004
    • BS EN ISO 20345:2011 Personal protective equipment. Safety footwear
      Supersedes BS EN ISO 20345:2004
    • BS EN ISO 22007-1:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
    • BS EN ISO 22007-2:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
    • BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
    • BS EN ISO 22007-4:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method
    • BS EN ISO 22867:2011 Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
      Supersedes BS EN ISO 22867:2008
    • BS EN ISO 24342:2012 Resilient and textile floor-coverings. Determination of side length, edge, straightness and squareness of tiles
      Supersedes BS EN 427:1994
    • BS EN ISO 25239-1:2011 Friction stir welding. Aluminium. Vocabulary
    • BS EN ISO 25239-2:2011 Friction stir welding. Aluminium. Design of weld joints
    • BS EN ISO 25239-3:2011 Friction stir welding. Aluminium. Qualification of welding operators
    • BS EN ISO 25239-4:2011 Friction stir welding. Aluminium. Specification and qualification of welding procedures
    • BS EN ISO 25239-5:2011 Friction stir welding. Aluminium. Quality and inspection requirements
    • BS EN ISO 26203-2:2011 Metallic materials. Tensile testing at high strain rates. Servo-hydraulic and other test systems
    • BS EN 50377-16-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LF3 APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category C
    • BS EN 50411-2-2:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed pan fibre splice closures Type 1, for category S & A
      Supersedes BS EN 50411-2-2:2007
    • BS EN 50411-2-3:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Sealed inline fibre splice closures Type 1, for category S & A
      Supersedes BS EN 50411-2-3:2007
    • BS EN 50411-3-3:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Singlemode optical fibre fusion splice protectors
    • BS EN 50443:2011 Effects of electromagnetic interference on pipelines caused by high voltage A.C. electric traction systems and/or high voltage A.C. power supply systems
    • BS EN 50467:2011 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
      Supersedes DD CLC/TS 50467:2008
    • BS EN 50526-1:2012 Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices. Surge arresters
      Supersedes BS EN 50123-5:2003
    • BS EN 50557:2011 Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
    • BS EN 60079-11:2012 Explosive atmospheres. Equipment protection by intrinsic safety “i”
      Supersedes BS EN 60079-11:2007 and BS EN 61241-11:2006 which are withdrawn. It partially Supersedes BS EN 60079-27:2008
    • BS EN 60335-2-53:2011 Household and similar electrical appliances. Safety. Particular requirements for sauna heating appliances and infrared cabins
      Supersedes BS EN 60335-2-53:2003 which remains current
    • BS EN 60475:2011 Method of sampling insulating liquids
      Supersedes BS 5263:1975
    • BS EN 60567:2011 Oil-filled electrical equipment. Sampling of gases and analysis of free and dissolved gases. Guidance
      Supersedes BS EN 60567:2005
    • BS EN 60683:2012 Industrial electroheating equipment. Test methods for submerged-arc furnaces
      Supersedes BS 7686:1993
    • BS EN 60695-11-4:2011 Fire hazard testing. Test flames. 50 W flame. Apparatus and confirmational test method
      Supersedes DD IEC/TS 60695-11-4:2004
    • BS EN 60704-2-10:2011 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these
      Supersedes BS EN 60704-2-10:2004 which remains current
    • BS EN 61000-3-12:2011 Electromagnetic compatibility (EMC). Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ?75 A per phase
      Supersedes BS EN 61000-3-12:2005 which remains current
    • BS EN 61148:2012 Terminal markings for valve device stacks and assemblies and for power conversion equipment
    • BS EN 61378-1:2011 Convertor transformers. Transformers for industrial applications
      Supersedes BS EN 61378-1:1999 which remains current
    • BS EN 61394:2011 Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
      Supersedes PD IEC 61394:1997
    • BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
    • BS EN 61821:2011 Electrical installations for lighting and beaconing of aerodromes. Maintenance of aeronautical ground lighting constant current series circuits
      Supersedes BS EN 61821:2003
    • BS EN 62027:2012 Preparation of object lists, including parts lists
      Supersedes BS EN 62027:2001
    • BS EN 62271-200:2012 High-voltage switchgear and controlgear. AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
      Supersedes BS EN 62271-200:2004 which remains current
    • BS EN 62282-3-200:2012 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
      Supersedes BS EN 62282-3-2:2006
    • BS EN 62549:2011 Articulated systems and flexible systems for cable guiding

    BS ENs implemented by amendment

    • BS EN ISO 18857-2:2011 Water quality. Determination of selected alkylphenols. Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in nonfiltered samples following solid-phase extraction and derivatisation
      Implementation of European Standard EN ISO 18557-2 by amendment to BS ISO 18857-2:2009
    • BS EN ISO 50001:2011 Energy management systems. Requirements with guidance for use
      Implementation of European Standard EN ISO 50001 by amendment to BS ISO 50001:2011

    BS implementations

    BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

    • BS ISO 37:2011 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
      Supersedes BS ISO 37:2005
    • BS ISO 3364:2011 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole. Dimensions
      Supersedes BS 4193-3:1997
    • BS ISO 3384-1:2011 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression. Testing at constant temperature
      Supersedes BS ISO 3384:2005
    • BS ISO 3567:2011 Vacuum gauges. Calibration by direct comparison with a reference gauge
    • BS ISO 4381:2011 Plain bearings. Tin casting alloys for multilayer plain bearings
      Supersedes BS ISO 4381:2000
    • BS ISO 4901:2011 Reinforced plastics based on unsaturated polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
      Supersedes BS 2782-4:Method 432A:1991
    • BS ISO 5291:2011 Belt drives. Grooved pulleys for joined classical V-belts. Groove sections AJ, BJ, CJ and DJ (effective system)
    • BS ISO 6072:2011 Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
      Supersedes BS ISO 6072:2002
    • BS ISO 8332:2011 Rubber compounding ingredients. Sulfur. Methods of test
      Supersedes BS ISO 8332:2006
    • BS ISO 8535-1:2011 Diesel engines. Steel tubes for high-pressure fuel injection pipes. Requirements for seamless cold-drawn single-wall tubes
      Supersedes BS ISO 8535-1:2006
    • BS ISO 8855:2011 Road vehicles. Vehicle dynamics and roadholding ability. Vocabulary
      Supersedes BS AU 244:1992
    • BS ISO 9361-2:2011 Indexable inserts for cutting tools. Ceramic inserts with rounded corners. Dimensions of inserts with cylindrical fixing hole
      Supersedes BS 4193-20:1993
    • BS ISO/IEC 9797-3:2011 Information technology. Security techniques. Message Authentication Codes (MACs). Mechanisms using a universal hash-function
    • BS ISO 10159:2011 Health informatics. Messages and communication. Web access reference manifest
    • BS ISO 10711:2012 Intelligent Transport Systems. Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
    • BS ISO 10784-1:2011 Space systems. Early operations. Spacecraft initialization and commissioning
    • BS ISO 10784-3:2011 Space systems. Early operations. Commissioning report
    • BS ISO 10803:2011 Design method for ductile iron pipes
    • BS ISO 11039:2012 Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate
    • BS ISO/IEC 11770-5:2011 Information technology. Security techniques. Key management. Group key management
    • BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
    • BS ISO 13082:2011 Milk and milk products. Determination of the lipase activity of pregastric lipase preparation
    • BS ISO 13088:2011 Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection
    • BS ISO 13314:2011 Mechanical testing of metals. Ductility testing. Compression test for porous and cellular metals
    • BS ISO 13400-3:2011 Road vehicles. Diagnostic communication over Internet Protocol (DoIP). Wired vehicle interface based on IEEE 802.3
    • BS ISO 13970:2011 Recreational diving services. Requirements for the training of recreational snorkelling guides
    • BS ISO 14470:2011 Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
    • BS ISO/IEC 14651:2011 Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering
      Supersedes BS ISO/IEC 14651:2007+A1:2009
    • BS ISO 14932:2012 Rubber compounding ingredients. Organic vulcanizing agents. Determination of organic peroxide content
    • BS ISO 15081:2011 Agricultural equipment. Graphical symbols for pressurized irrigation systems
      Supersedes BS ISO 15081:2005
    • BS ISO 16172:2011 Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
      Supersedes BS ISO 16172:2006
    • BS ISO 16589-2:2011 Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Vocabulary
      Supersedes BS ISO 16589-2:2001
    • BS ISO 16817:2012 Building environment design. Indoor environment. Design process for visual environment
    • BS ISO 17214:2011 Space data and information transfer systems. Spacecraft onboard interface services. Time access service
    • BS ISO/IEC 18031:2011 Information technology. Security techniques. Random bit generation
      Supersedes BS ISO/IEC 18031:2005
    • BS ISO/IEC 18033-4:2011 Information technology. Security techniques. Encryption algorithms. Stream ciphers
      Supersedes BS ISO/IEC 18033-4:2005+A1:2009
    • BS ISO/IEC 18047-2:2012 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications below 135 kHz
      Supersedes PD ISO/IEC TR 18047-2:2006
    • BS ISO 18132-1:2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank gauges. Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage
      Supersedes BS ISO 18132-1:2006
    • BS ISO 18132-3:2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank gauges. Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
      Supersedes BS ISO 18132-1:2006
    • BS ISO 18946:2011 Imaging materials. Reflection colour photographic prints. Method for testing humidity fastness
    • BS ISO/IEC 19794-2:2011 Information technology. Biometric data interchange formats. Finger minutiae data
      Supersedes BS ISO/IEC 19794-2:2005+A1:2010
    • BS ISO/IEC 19794-4:2011 Information technology. Biometric data interchange formats. Finger image data
      Supersedes BS ISO/IEC 19794-4:2005
    • BS ISO/IEC 19794-8:2011 Information technology. Biometric data interchange formats. Finger pattern skeletal data
      Supersedes BS ISO/IEC 19794-8:2006
    • BS ISO 19893:2011 Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling
    • BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process. Residential applications
    • BS ISO/IEC 24760-1:2011 Information technology. Security techniques. A framework for identity management. Terminology and concepts
    • BS ISO 25297-2:2011 Optics and photonics. Electronic exchange of optical data. Mapping to the classes and properties defined in ISO 23584
    • BS ISO/IEC 27006:2011 Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management systems
      Supersedes BS ISO/IEC 27006:2007
    • BS ISO 28961:2012 Acoustics. Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under freefield listening conditions
    • BS ISO/IEC 29109-8:2011 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Finger pattern skeletal data
    • BS ISO/IEC 29128:2011 Information technology. Security techniques. Verification of cryptographic protocols
    • BS ISO/IEC 29150:2011 Information technology. Security techniques. Signcryption
    • BS ISO/IEC 29192-2:2012 Information technology. Security techniques. Lightweight cryptography. Block ciphers
    • BS ISO/IEC 29500 PARTS 1-4:2011 Information technology. Document description and processing languages. Office Open XML File Formats
    • BS ISO/IEC 40210:2011 Information technology. W3C SOAP Version 1.2. Messaging Framework (Second Edition)
    • BS ISO/IEC 40220:2011 Information technology. W3C SOAP Version 1.2. Adjuncts
    • BS ISO/IEC 40240:2011 Information technology. W3C Web Services Addressing 1.0. Core
    • BS ISO/IEC 40250:2011 Information technology. W3C Web Services Addressing 1.0. SOAP Binding
    • BS ISO/IEC 40260:2011 Information technology. W3C Web Services Addressing 1.0. Metadata
    • BS ISO/IEC 40270:2011 Information technology. W3C Web Services Policy 1.5. Framework
    • BS ISO/IEC 40280:2011 Information technology. W3C Web Services Policy 1.5. Attachment
    • BS IEC 60076-21:2011 Power transformers. Standard requirements, terminology, and test code for step-voltage regulators
    • BS IEC 60493-1:2011 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
      Supersedes BS 7826-1:1995
    • BS IEC/IEEE 62582-1:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. General
    • BS IEC/IEEE 62582-2:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Indenter modulus
    • BS IEC/IEEE 62582-4:2011 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods. Oxidation induction techniques
    • BS IEC 62613-2:2011 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSCSYSTEMS). Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships

    Published documents

    • PD ISO/TR 10929:2012 Nanotechnologies. Characterization of multiwall carbon nanotube (MWCNT) samples
    • PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal exposure. Principles and methods
    • PD CEN/TR 16303-4:2012 Road restraint systems. Guidelines for computational mechanics of crash testing against vehicle restraint system. Validation Procedures
    • PD ISO/TR 23081-3:2011 Information and documentation. Managing metadata for records. Self-assessment method
    • PD ISO/IEC TR 29166:2011 Information technology. Document description and processing languages. Guidelines for translation between ISO/IEC 26300 and ISO/IEC 29500 document formats
    • PD CEN/CLC/ETSI TR 50572:2011 Functional reference architecture for communications in smart metering systems
    • PD IEC/TR 62627-03-02:2011 Fibre optic interconnecting devices and passive components. Reliability. Report of high power transmission test of specified passive optical components
    • PD IEC/TR 62732:2012 Three-digit-code for designation of colour rendering and correlated colour temperature

    Publicly available specifications

    Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

    • PAS 97:2012 A specification for mail screening and security
      Supersedes PAS 97:2009
    • PAS 107:2012 Specification for the manufacture and storage of size reduced tyre materials
      Supersedes PAS 107:2007

    Corrigenda to British Standards and updated British Standards

    Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

    • BS 8541-2:2011 Library objects for architecture, engineering and construction. Recommended 2D symbols of building elements for use in building information modelling
      CORRIGENDUM 1
    • BS EN 30-1-1:2008+A2:2010 Domestic cooking appliances burning gas. Safety. General
      CORRIGENDUM 1
    • BS EN 558:2008+A1:2011 Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
      AMENDMENT 1
    • BS EN 1090-1:2009+A1:2011 Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components
      AMENDMENT 1
    • BS EN 1492-2:2000+A1:2008 Textile slings. Safety. Roundslings made of manmade fibres, for general purpose use
      CORRIGENDUM 2
    • BS EN ISO 1518-2:2011 Paints and varnishes. Determination of scratch resistance. Variable-loading method
      CORRIGENDUM 1
    • BS EN 3475-603:2011 Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to wet arc tracking
      CORRIGENDUM 1
    • BS EN ISO 6360-2:2004+A1:2011 Dentistry. Number coding system for rotary instruments. Shapes
      AMENDMENT 1
    • BS EN ISO 6887-4:2003+A1:2011 Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products
      AMENDMENT 1
    • BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
      CORRIGENDUM 1
    • BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
      CORRIGENDUM 1
    • BS EN 10245-4:2011 Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
      CORRIGENDUM 1
    • BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire. Polyamide coated wire
      CORRIGENDUM 1
    • BS EN ISO 11148-2:2011 Hand-held non-electric power tools. Safety requirements. Cutting-off and crimping power tools
      CORRIGENDUM 1
    • BS EN 12059:2008+A1:2011 Natural stone products. Dimensional stone work. Requirements
      AMENDMENT 1
    • BS EN 12201-2:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE). Pipes
      CORRIGENDUM 1
    • BS EN 13157:2004+A1:2009 Cranes. Safety. Hand powered cranes
      AMENDMENT 1
    • BS EN 14033-2:2008+A1:2011 Railway applications. Track. Railbound construction and maintenance machines. Technical requirements for working
      AMENDMENT 1
    • BS EN 14844:2006+A2:2011 Precast concrete products. Box culverts
      AMENDMENT 2
    • BS EN 15440:2011 Solid recovered fuels. Methods for the determination of biomass content
      CORRIGENDUM 1
    • BS EN 15649-1:2009+A1:2012 Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods
      AMENDMENT 1
    • BS EN 15649-2:2009+A1:2012 Floating leisure articles for use on and in the water. Consumer information
      AMENDMENT 1
    • BS EN 15695-2:2009 Agricultural tractors and self-propelled sprayers. Protection of the operator (driver) against hazardous substances. Filters, requirements and test procedures
      CORRIGENDUM 1
    • BS EN ISO 15927-5:2004+A1:2011 Hygrothermal performance of buildings. Calculation and presentation of climatic data. Data for design heat load for space heating
      AMENDMENT 1
    • BS EN 15978:2011 Sustainability of construction works. Assessment of environmental performance of buildings. Calculation method
      CORRIGENDUM 1
    • BS EN 16016-3:2011 Non destructive testing. Radiation methods. Computed Tomography. Operation and interpretation
      CORRIGENDUM 1
    • BS EN 16147:2011 Heat pumps with electrically driven compressors. Testing and requirements for marking of domestic hot water units
      CORRIGENDUM 1
    • BS EN ISO 18286:2010 Hot-rolled stainless steel plates. Tolerances on dimensions and shape
      CORRIGENDUM 1
    • BS EN ISO 18857-2:2011 Water quality. Determination of selected alkylphenols. Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in nonfiltered samples following solid-phase extraction and derivatisation
      CORRIGENDUM 1
    • BS EN ISO 19011:2011 Guidelines for auditing management systems
      CORRIGENDUM 1
    • BS EN ISO 22476-2:2005+A1:2011 Geotechnical investigation and testing. Field testing. Dynamic probing
      AMENDMENT 1
    • BS EN ISO 22476-3:2005+A1:2011 Geotechnical investigation and testing. Field testing. Standard penetration test
      AMENDMENT 1
    • BS EN ISO 50001:2011 Energy management systems. Requirements with guidance for use
      CORRIGENDUM 1
    • BS EN 60603-7:2009+A1:2011 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors
      AMENDMENT 1
    • BS EN 60730-2-7:2010 Automatic electrical controls for household and similar use. Particular requirements for timers and time switches
      CORRIGENDUM 1
    • BS EN 60745-2-4:2009+A11:2011 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
      AMENDMENT 11
    • BS EN 60851-5:2008+A1:2011 Winding wires. Test methods. Electrical properties
      CORRIGENDUM 1
    • BS EN 60950-1:2006+A12:2011 Information technology equipment. Safety. General requirements
      CORRIGENDUM 5
    • BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
      CORRIGENDUM 2
    • BS EN 61937-2:2007+A1:2011 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Burst-info
      AMENDMENT 1
    • BS EN 62549:2011 Articulated systems and flexible systems for cable guiding
      CORRIGENDUM 1
    • BS EN 140401-804:2011 Detail Specification: Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25
      CORRIGENDUM 1
    • BS ISO 4190-1:2010 Lift (Elevator) installation. Class I, II, III and VI lifts
      CORRIGENDUM 1
    • BS ISO 4251-2:2005+A1:2011 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre load ratings
      AMENDMENT 1
    • BS ISO 5658-2:2006+A1:2011 Reaction to fire tests. Spread of flame. Lateral spread on building and transport products in vertical configuration
      AMENDMENT 1
    • BS ISO/IEC 10118-2:2010 Information technology. Security techniques. Hash-functions. Hash-functions using an n-bit block cipher
      CORRIGENDUM 1
    • BS ISO/IEC 14443-3:2011+A1:2011 Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision
      AMENDMENT 1
    • BS ISO/IEC 18013-2:2008 Information technology. Personal identification. ISO-compliant driving licence. Machine-readable technologies
      CORRIGENDUM 1
    • BS ISO/IEC 18013-3:2009 Information technology. Personal Identification. ISO compliant driving licence. Access control, authentication and integrity validation
      CORRIGENDUM 1
    • BS ISO 19005-1:2005 Document management. Electronic document file format for long-term preservation. Use of PDF 1.4 (PDF/A-1)
      CORRIGENDUM 2
    • BS ISO/IEC 19757-8:2008 Information technology. Document Schema Definition Languages (DSDL). Document Semantics Renaming Language (DSRL)
      CORRIGENDUM 1
    • BS ISO/IEC 24754-1:2008 Information technology. Document description and processing languages. Minimum requirements for specifying document rendering systems. Feature specifications for document rendering systems
      CORRIGENDUM 1
    • BS ISO/IEC 26300:2006 Information technology. Open Document Format for Office Applications (OpenDocument) v1.0
      CORRIGENDUM 2

    British Standards withdrawn

    • BS 2782-4:Method 432A:1991 (ISO 4901:1985) Methods of testing plastics. Chemical properties. Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins
      Superseded by BS ISO 4901:2011
    • BS 4193-3:1997 (ISO 3364:1997) Hardmetal insert tooling. Specification for dimensions of indexable hardmetal (carbide) inserts with rounded corners and with cylindrical fixing hole
      Superseded by BS ISO 3364:201
    • BS 4193-20:1993 (ISO 9361-2:1991) Hardmetal insert tooling. Specification for dimensions of ceramic inserts with rounded corners with fixing hole
      Superseded by BS ISO 9361-2:2011
    • BS 5263:1975 Method for sampling liquid dielectrics
      Superseded by BS EN 60475:2011
    • BS 6366:1983 Specification for studs for rugby football boots
      Superseded by BS 6366:2011
    • BS 7066-1:1990 (EN 152-1:1988) Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Brushing procedure
      Superseded by BS EN 152:2011
    • BS 7066-2:1990 (EN 152-2:1988) Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Application by methods other than brushing
      Superseded by BS EN 152:2011
    • BS 7686:1993 (IEC 60683:1980) Test methods for submerged-arc furnaces
      Superseded by BS EN 60683:2012
    • BS 7826-1:1995 (IEC 60493-1:1974) Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
      Superseded by BS IEC 60493-1:2011
    • BS EN 427:1994 Resilient floor coverings. Determination of the side length, squareness and straightness of tiles
      Superseded by BS EN ISO 24342:2012
    • BS EN ISO 1746:2001 Rubber or plastics hoses and tubing. Bending tests
      Superseded by BS EN ISO 10619-1:2011
    • BS EN 1801:1999 Transportable gas cylinders. Filling conditions for single acetylene cylinders
      Superseded by BS EN ISO 11372:2011
    • BS EN 1971:1999 Copper and copper alloys. Eddy current test for tubes
      Superseded by BS EN 1971-1:2011 and BS EN 1971-2:2011
    • BS EN ISO 4672:1999 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
      Superseded by BS EN ISO 10619-2:2011
    • BS EN ISO 5402:2002 Leather. Physical and mechanical tests. Determination of flex resistance by flexometer method
      Superseded by BS EN ISO 5402-1:2011
    • BS EN ISO 5403:2002 Leather. Physical and mechanical tests. Determination of water resistance of flexible leather
      Superseded by BS EN ISO 5403-1:2011
    • BS EN 12454:1998 Founding. Visual examination of surface discontinuities. Steel sand castings
      Superseded by BS EN 1370:2011
    • BS EN 12754:2002 Transportable gas cylinders. Cylinders for dissolved acetylene. Inspection at time of filling
      Superseded by BS EN ISO 11372:2011
    • DD ENV 14272:2002 Plywood. Calculation method for some mechanical properties
      Superseded by BS EN 14272:2011
    • BS EN ISO/IEC 17021:2006 Conformity assessment. Requirements for bodies providing audit and certification of management systems
      Superseded by BS EN ISO/IEC 17021:2011
    • DD CEN ISO/TS 17450-1:2007 Geometrical product specifications (GPS). General concepts. Model for geometrical specification and verification
      Superseded by BS EN ISO 17450-1:2011
    • BS EN 50123-5:2003 Railway applications. Fixed installations. D.C. switchgear. Surge arresters and low-voltage limiters for specific use in D.C. systems
      Superseded by BS EN 50526-1:2012
    • BS EN 55015:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
      Superseded by BS EN 55015:2006+A2:2009
    • BS EN 60079-27:2008 Explosive atmospheres. Fieldbus intrinsically safe concept (FISCO)
      Superseded by BS EN 60079-11:2012
    • BS EN 60335-2-40:2003 Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
      Superseded by BS EN 60335-2-40:2003+A2:2009
    • BS EN 61000-4-2:1995 Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
      Superseded by BS EN 61000-4-2:2009
    • BS EN 61000-4-6:2007 Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radiofrequency fields
      Superseded by BS EN 61000-4-6:2009
    • BS EN 61000-4-7:2002 Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power
      Superseded by BS EN 61000-4-7:2002+A1:2009
    • BS EN 61000-4-17:1999 Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on D.C. input power port immunity test
      Superseded by BS EN 61000-4-17:1999+A2:2009
    • BS EN 61000-4-27:2001 Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test
      Superseded by BS EN 61000-4-27:2000+A1:2009
    • BS EN 61000-4-28:2000 Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test
      Superseded by BS EN 61000-4-28:2000+A2:2009
    • BS EN 61241-11:2006 Electrical apparatus for use in the presence of combustible dust. Protection by intrinsic safety “iD”
      Superseded by BS EN 60079-11:2012
    • BS EN 62271-109:2006 High-voltage switchgear and controlgear. Alternating-current series capacitor by-pass switches
      Superseded by BS EN 62271-109:2009
    • BS ISO 3384:2005 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures
      Superseded by BS ISO 3384-1:2011
    • PD ISO/IEC TR 18047-2:2006 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications below 135 kHz
      Superseded by BS ISO/IEC 18047-2:2012
    • BS ISO 18132-1:2006 Refrigerated light hydrocarbon fluids. General requirements for automatic level gauges. Gauges onboard ships carrying liquefied gases
      Superseded by BS ISO 18132-1:2011 and BS ISO 18132-3:2011
    • DD IEC/TS 60695-11-4:2004 Fire hazard testing. Test flames. 50 W flame. Apparatus and confirmational test method
      Superseded by BS EN 60695-11-4:2011
    • PD IEC 61394:1997 Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors
      Superseded by BS EN 61394:2011
    • BS AU 244:1992 Glossary of terms for road vehicle dynamics and road holding ability
      Superseded by BS ISO 8855:2011
    • PAS 220:2008 Prerequisite programmes on food safety for food manufacturing
      This PAS is withdrawn as it is replaced by the identical publication ISO/TS 22002:2009
    veloped by Committee D01.42, ASTM BOS Volume 06.02.
  • E8/E8M Standard Test Methods for Tension Testing of Metallic Materials has been revised to E8/E8M-11 developed by Committee E28.04, ASTM BOS Volume 03.01.
  • E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source has been revised to E162-12a developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection has been revised to E329-11c developed by Committee E36.70, ASTM BOS Volume 04.02.
  • E805 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials has been revised to E805-12 developed by Committee E12.04, ASTM BOS Volume 06.01.
  • E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry has been revised to E1834-11 developed by Committee E01.08, ASTM BOS Volume 03.05.
  • E1967 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope has been revised to E1967-11a developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E2128 Standard Guide for Evaluating Water Leakage of Building Walls has been revised to E2128-12 developed by Committee E06.55, ASTM BOS Volume 04.12.
  • E2545 Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras has been reapproved, available as E2545-07(2012) developed by Committee E12.06, ASTM BOS Volume 06.01.
  • E2741 Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2741-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2742 Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2742-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2743 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2743-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2745 Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2745-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2746 Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2746-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2747 Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2747-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2773 Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2773-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • E2774 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences is a new standard, now available. E2774-11 developed by Committee E60.02, ASTM BOS Volume 04.12.
  • F406 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards has been revised to F406-12 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F539 Standard Practice for Fitting Athletic Footwear has been reapproved, available as F539-01(2011) developed by Committee F08.54, ASTM BOS Volume 15.07.
  • F568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012) has been withdrawn, with no replacement. F568M-07 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F667 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings has been revised to F667-12 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • F880 Standard Specification for Stainless Steel Socket-Set Screws has been editorially changed, available as F880-02(2008)e1 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F1701 Standard Specification for Unused Rope with Special Electrical Properties has been revised to F1701-12 developed by Committee F18.35, ASTM BOS Volume 10.03.
  • F1720 Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin has been reapproved, available as F1720-06(2011) developed by Committee F08.22, ASTM BOS Volume 15.07.
  • F1777 Standard Practice for Paintball Field Operation has been revised to F1777-12 developed by Committee F08.24, ASTM BOS Volume 15.07.
  • F1833 Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes has been reapproved, available as F1833-97(2011) developed by Committee F08.54, ASTM BOS Volume 15.07.
  • F2032 Standard Specification for Helmets Used for BMX Cycling has been reapproved, available as F2032-06(2011) developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F2059 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask has been reapproved (with editorial change), available as F2059-06(2011)e1 developed by Committee F20.13, ASTM BOS Volume 11.05.
  • F2096 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test) has been revised (with title change) to F2096-11 developed by Committee F02.40, ASTM BOS Volume 15.10.
  • F2225 Standard Safety Specification for Consumer Trampoline Enclosures has been revised to F2225-12 developed by Committee F08.17, ASTM BOS Volume 15.07.
  • F2333 Standard Test Method for Traction Characteristics of the Athletic Shoe–Sports Surface Interface has been reapproved, available as F2333-04(2011) developed by Committee F08.54, ASTM BOS Volume 15.07.
  • F2400 Standard Specification for Helmets Used in Pole Vaulting has been reapproved, available as F2400-06(2011) developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F2416 Standard Specification for Protective Headgear Used in Electric Personal Assistive Mobility Devices has been reapproved, available as F2416-06(2011) developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F2439 Standard Specification for Headgear Used in Soccer has been reapproved, available as F2439-06(2011) developed by Committee F08.53, ASTM BOS Volume 15.07.
  • F2569 Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use has been revised to F2569-11 developed by Committee F08.52, ASTM BOS Volume 15.07.
  • F2907 Consumer Safety Specification for Sling Carriers is a new standard, now available. F2907-12 developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2914 Standard Guide for Identification of Shelf-life Test Attributes for Endovascular Devices is a new standard, now available. F2914-12 developed by Committee F04.30, ASTM BOS Volume 13.01.
  • F2936 Standard Specification for Chocks, Ship Mooring, Cast Steel is a new standard, now available. F2936-12 developed by Committee F25.01, ASTM BOS Volume 01.07.
or determining the protective effectiveness of a preservative treatment against blue stain in service. Brushing procedure
Superseded by BS EN 152:2011
  • BS 7066-2:1990 (EN 152-2:1988) Wood preservatives. Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service. Application by methods other than brushing
    Superseded by BS EN 152:2011
  • BS 7686:1993 (IEC 60683:1980) Test methods for submerged-arc furnaces
    Superseded by BS EN 60683:2012
  • BS 7826-1:1995 (IEC 60493-1:1974) Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
    Superseded by BS IEC 60493-1:2011
  • BS EN 427:1994 Resilient floor coverings. Determination of the side length, squareness and straightness of tiles
    Superseded by BS EN ISO 24342:2012
  • BS EN ISO 1746:2001 Rubber or plastics hoses and tubing. Bending tests
    Superseded by BS EN ISO 10619-1:2011
  • BS EN 1801:1999 Transportable gas cylinders. Filling conditions for single acetylene cylinders
    Superseded by BS EN ISO 11372:2011
  • BS EN 1971:1999 Copper and copper alloys. Eddy current test for tubes
    Superseded by BS EN 1971-1:2011 and BS EN 1971-2:2011
  • BS EN ISO 4672:1999 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
    Superseded by BS EN ISO 10619-2:2011
  • BS EN ISO 5402:2002 Leather. Physical and mechanical tests. Determination of flex resistance by flexometer method
    Superseded by BS EN ISO 5402-1:2011
  • BS EN ISO 5403:2002 Leather. Physical and mechanical tests. Determination of water resistance of flexible leather
    Superseded by BS EN ISO 5403-1:2011
  • BS EN 12454:1998 Founding. Visual examination of surface discontinuities. Steel sand castings
    Superseded by BS EN 1370:2011
  • BS EN 12754:2002 Transportable gas cylinders. Cylinders for dissolved acetylene. Inspection at time of filling
    Superseded by BS EN ISO 11372:2011
  • DD ENV 14272:2002 Plywood. Calculation method for some mechanical properties
    Superseded by BS EN 14272:2011
  • BS EN ISO/IEC 17021:2006 Conformity assessment. Requirements for bodies providing audit and certification of management systems
    Superseded by BS EN ISO/IEC 17021:2011
  • DD CEN ISO/TS 17450-1:2007 Geometrical product specifications (GPS). General concepts. Model for geometrical specification and verification
    Superseded by BS EN ISO 17450-1:2011
  • BS EN 50123-5:2003 Railway applications. Fixed installations. D.C. switchgear. Surge arresters and low-voltage limiters for specific use in D.C. systems
    Superseded by BS EN 50526-1:2012
  • BS EN 55015:2006 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
    Superseded by BS EN 55015:2006+A2:2009
  • BS EN 60079-27:2008 Explosive atmospheres. Fieldbus intrinsically safe concept (FISCO)
    Superseded by BS EN 60079-11:2012
  • BS EN 60335-2-40:2003 Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    Superseded by BS EN 60335-2-40:2003+A2:2009
  • BS EN 61000-4-2:1995 Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication
    Superseded by BS EN 61000-4-2:2009
  • BS EN 61000-4-6:2007 Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radiofrequency fields
    Superseded by BS EN 61000-4-6:2009
  • BS EN 61000-4-7:2002 Electromagnetic compatibility (EMC). Testing and measurement techniques. General guide on harmonics and interharmonics measurements and instrumentation, for power
    Superseded by BS EN 61000-4-7:2002+A1:2009
  • BS EN 61000-4-17:1999 Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on D.C. input power port immunity test
    Superseded by BS EN 61000-4-17:1999+A2:2009
  • BS EN 61000-4-27:2001 Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test
    Superseded by BS EN 61000-4-27:2000+A1:2009
  • BS EN 61000-4-28:2000 Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test
    Superseded by BS EN 61000-4-28:2000+A2:2009
  • BS EN 61241-11:2006 Electrical apparatus for use in the presence of combustible dust. Protection by intrinsic safety “iD”
    Superseded by BS EN 60079-11:2012
  • BS EN 62271-109:2006 High-voltage switchgear and controlgear. Alternating-current series capacitor by-pass switches
    Superseded by BS EN 62271-109:2009
  • BS ISO 3384:2005 Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures
    Superseded by BS ISO 3384-1:2011
  • PD ISO/IEC TR 18047-2:2006 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications below 135 kHz
    Superseded by BS ISO/IEC 18047-2:2012
  • BS ISO 18132-1:2006 Refrigerated light hydrocarbon fluids. General requirements for automatic level gauges. Gauges onboard ships carrying liquefied gases
    Superseded by BS ISO 18132-1:2011 and BS ISO 18132-3:2011
  • DD IEC/TS 60695-11-4:2004 Fire hazard testing. Test flames. 50 W flame. Apparatus and confirmational test method
    Superseded by BS EN 60695-11-4:2011
  • PD IEC 61394:1997 Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors
    Superseded by BS EN 61394:2011
  • BS AU 244:1992 Glossary of terms for road vehicle dynamics and road holding ability
    Superseded by BS ISO 8855:2011
  • PAS 220:2008 Prerequisite programmes on food safety for food manufacturing
    This PAS is withdrawn as it is replaced by the identical publication ISO/TS 22002:2009
  • Published in international.