ASTM STANDARDS

Issue 39 – June 2012

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A100 Standard Specification for Ferrosilicon has been reapproved, available as A100-07(2012) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A128/A128M Standard Specification for Steel Castings, Austenitic Manganese has been reapproved, available as A128/A128M-93(2012) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications has been revised to A240/A240M-12 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service has been reapproved, available as A352/A352M-06(2012) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A355 Standard Specification for Steel Bars, Alloys, for Nitriding has been reapproved, available as A355-89(2012) developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A400 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties has been reapproved, available as A400-69(2012) developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A434 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered has been reapproved, available as A434-06(2012) developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A487/A487M Standard Specification for Steel Castings Suitable for Pressure Service has been reapproved, available as A487/A487M-93(2012) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality has been reapproved, available as A576-90b(2012) developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A580/A580M Standard Specification for Stainless Steel Wire has been editorially changed, available as A580/A580M-12e1 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A608/A608M Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures has been reapproved, available as A608/A608M-06(2012) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe has been revised (with title change) to A648-12 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A696 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components has been reapproved, available as A696-90a(2012) developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A739 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both has been reapproved, available as A739-90a(2012) developed by Committee A01.15, ASTM BOS Volume 01.05.
  • A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A781/A781M-12a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A872/A872M Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments has been reapproved, available as A872/A872M-07a(2012) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A903/A903M Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection has been reapproved, available as A903/A903M-99(2012) developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement has been revised to A955/A955M-12 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction has been revised to B101-12 developed by Committee B05.01, ASTM BOS Volume 02.01.
  • B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes has been revised to B124/B124M-12 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers has been editorially changed, available as B338-10e1 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation has been reapproved, available as C203-05a(2012) developed by Committee C16.32, ASTM BOS Volume 04.06.
  • C272/C272M Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions has been revised (with designation change) to C272/C272M-12 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C478 Standard Specification for Precast Reinforced Concrete Manhole Sections has been revised to C478-12 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C823/C823M Standard Practice for Examination and Sampling of Hardened Concrete in Constructions has been revised (with designation change) to C823/C823M-12 developed by Committee C09.65, ASTM BOS Volume 04.02.
  • C885 Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance has been reapproved, available as C885-87(2012) developed by Committee C08.01, ASTM BOS Volume 15.01.
  • C1548 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration has been reapproved, available as C1548-02(2012) developed by Committee C08.01, ASTM BOS Volume 15.01.
  • D69 Standard Test Methods for Friction Tapes has been revised to D69-12 developed by Committee D09.07, ASTM BOS Volume 10.01.
  • D632 Standard Specification for Sodium Chloride has been reinstated, with revision to D632-12 developed by Committee D04.31, ASTM BOS Volume 04.03.
  • D888 Standard Test Methods for Dissolved Oxygen in Water has been revised to D888-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D902 Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation has been revised to D902-12 developed by Committee D09.07, ASTM BOS Volume 10.01.
  • D1126 Standard Test Method for Hardness in Water has been revised to D1126-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D1159 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration has been reapproved, available as D1159-07(2012) developed by Committee D02.04, ASTM BOS Volume 05.01.
  • D1425/D1425M Standard Test Method for Unevenness of Textile Strands Using Capacitance Testing Equipment has been editorially changed, available as D1425/D1425M-09e1 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy has been revised to D1976-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D2386 Standard Test Method for Freezing Point of Aviation Fuels has been reapproved, available as D2386-06(2012) developed by Committee D02.07, ASTM BOS Volume 05.01.
  • D2484 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape has been reapproved (with editorial change), available as D2484-06(2012)e1 developed by Committee D09.07, ASTM BOS Volume 10.01.
  • D2503 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure has been reapproved, available as D2503-92(2012) developed by Committee D02.04, ASTM BOS Volume 05.01.
  • D2510 Standard Test Method for Adhesion of Solid Film Lubricants has been reapproved, available as D2510-94(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D2549 Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography has been reapproved, available as D2549-02(2012) developed by Committee D02.04, ASTM BOS Volume 05.01.
  • D2669 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts) has been reapproved (with editorial change), available as D2669-06(2012)e1 developed by Committee D02.10.0A, ASTM BOS Volume 05.01.
  • D2715 Standard Test Method for Volatilization Rates of Lubricants in Vacuum has been reapproved, available as D2715-92(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D2779 Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids has been reapproved, available as D2779-92(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D2884 Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method has been reapproved, available as D2884-93(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D3342 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water has been reapproved, available as D3342-90(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D3429 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids has been reapproved, available as D3429-93(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D3523 Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test) has been reapproved, available as D3523-92(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry has been reapproved, available as D3701-01(2012) developed by Committee D02.03, ASTM BOS Volume 05.01.
  • D3704 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion has been reapproved, available as D3704-96(2012) developed by Committee D02.L0, ASTM BOS Volume 05.01.
  • D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells has been revised to D3753-12 developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D3790 Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying has been reapproved, available as D3790-79(2012) developed by Committee D31.06, ASTM BOS Volume 15.04.
  • D3827 Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids has been reapproved, available as D3827-92(2012) developed by Committee D02.L0, ASTM BOS Volume 05.02.
  • D3897 Standard Practice for Calculation of Basicity of Chrome Tanning Liquors has been reapproved, available as D3897-91(2012) developed by Committee D31.06, ASTM BOS Volume 15.04.
  • D4178 Standard Practice for Calibrating Moisture Analyzers has been reapproved, available as D4178-82(2012) developed by Committee D02.D0, ASTM BOS Volume 05.02.
  • D4290 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions has been reapproved, available as D4290-07(2012) developed by Committee D02.G0, ASTM BOS Volume 05.02.
  • D4309 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water has been revised to D4309-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D4514 Standard Specification for Friction Tape has been revised to D4514-12 developed by Committee D09.07, ASTM BOS Volume 10.02.
  • D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels has been reapproved, available as D4529-01(2011) developed by Committee D02.05, ASTM BOS Volume 05.02.
  • D4655 Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid) has been reapproved, available as D4655-95(2012) developed by Committee D31.06, ASTM BOS Volume 15.04.
  • D4774 Standard Specification for User Applied Drug Labels in Anesthesiology has been editorially changed, available as D4774-11e1 developed by Committee D10.32, ASTM BOS Volume 15.10.
  • D4906 Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials has been reapproved, available as D4906-95(2012) developed by Committee D31.06, ASTM BOS Volume 15.04.
  • D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) has been reapproved, available as D5236-03(2011) developed by Committee D02.08, ASTM BOS Volume 05.02.
  • D5347 Standard Test Method for Determination of the Ash Content of Fats and Oils has been reapproved, available as D5347-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5348 Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene has been reapproved, available as D5348-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5349 Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method has been reapproved, available as D5349-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5350 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A has been reapproved, available as D5350-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5352 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C has been reapproved, available as D5352-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5353 Standard Test Method for Determination of Total Desulfated Fatty Matter has been reapproved, available as D5353-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5354 Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils has been reapproved, available as D5354-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5355 Standard Test Method for Specific Gravity of Oils and Liquid Fats has been reapproved, available as D5355-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5439 Standard Test Method for Determination of Sediment in Moellon has been reapproved, available as D5439-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5551 Standard Test Method for Determination of the Cloud Point of Oil has been reapproved, available as D5551-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5553 Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils has been reapproved, available as D5553-95(2012) developed by Committee D31.08, ASTM BOS Volume 15.04.
  • D5663 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard has been reapproved, available as D5663-97(2011) developed by Committee D10.19, ASTM BOS Volume 15.10.
  • D6016 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather has been reapproved, available as D6016-06(2012) developed by Committee D31.06, ASTM BOS Volume 15.04.
  • D6018 Standard Test Method for Determining the Presence of Lead Salts in Leather has been reapproved, available as D6018-96(2012) developed by Committee D31.06, ASTM BOS Volume 15.04.
  • D6581 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography has been revised to D6581-12 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) has been reinstated, with revision to D6723-12 developed by Committee D04.44, ASTM BOS Volume 04.03.
  • D6747 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes has been revised (with title change) to D6747-12 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D6800 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals has been revised to D6800-12 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams has been reapproved, available as D7056-07(2012) developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D7340 Standard Practice for Thermal Conductivity of Leather has been reapproved (with editorial change), available as D7340-07(2012)e1 developed by Committee D31.03, ASTM BOS Volume 15.04.
  • D7506/D7506M Standard Test Method for Pocket Reinforcement has been revised to D7506/D7506M-12 developed by Committee D13.54, ASTM BOS Volume 07.02.
  • D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations has been revised to D7663-12 developed by Committee D18.21, ASTM BOS Volume 04.09.
  • D7666 Standard Specification for Triglyceride Burner Fuel is a new standard, now available. D7666-12 developed by Committee D02.P0, ASTM BOS Volume 05.04.
  • D7666 Standard Specification for Triglyceride Burner Fuel is a new standard, now available. D7666-12 developed by Committee D02.P0, ASTM BOS Volume 05.04.
  • D7705/D7705M Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction is a new standard, now available. D7705/D7705M-12 developed by Committee D30.05, ASTM BOS Volume 15.03.
  • E603 Standard Guide for Room Fire Experiments has been revised to E603-12 developed by Committee E05.21, ASTM BOS Volume 04.07.
  • E938 Standard Test Method for Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Adult Human Lice has been revised (with designation change) to E938/E938M-12 developed by Committee E35.12, ASTM BOS Volume 11.05.
  • E1544 Standard Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids (Withdrawn 2012) has been withdrawn, with no replacement. E1544- developed by Committee E28.13, ASTM BOS Volume 03.01.
  • E1946 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects has been revised (with title change) to E1946-12 developed by Committee E06.81, ASTM BOS Volume 04.11.
  • E2210 Standard Specification for Guideline Elements Model version 3 (GEM III)—Document Model for Clinical Practice Guidelines has been revised (with title change) to E2210-12 developed by Committee E31.35, ASTM BOS Volume 14.01.
  • E2492 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test has been reapproved, available as E2492-07(2012) developed by Committee E28.02, ASTM BOS Volume 03.01.
  • E2574/E2574M Standard Test Method for Fire Testing of School Bus Seat Assemblies has been revised to E2574/E2574M-12 developed by Committee E05.17, ASTM BOS Volume 04.07.
  • E2691 Standard Practice for Job Productivity Measurement has been revised to E2691-11 developed by Committee E06.81, ASTM BOS Volume 04.12.
  • E2854 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Line-of-Sight Range is a new standard, now available. E2854-12 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2855 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-Sight Range is a new standard, now available. E2855-12 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2875/E2875M Standard Guide for Personal Protective Equipment for the Handling of Flat Glass is a new standard, now available. E2875/E2875M-12 developed by Committee E34.35, ASTM BOS Volume 11.03.
  • F513 Standard Specification for Eye and Face Protective Equipment for Hockey Players has been revised to F513-12 developed by Committee F08.15, ASTM BOS Volume 15.07.
  • F726 Standard Test Method for Sorbent Performance of Adsorbents has been revised to F726-12 developed by Committee F20.22, ASTM BOS Volume 11.05.
  • F734 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material has been reapproved, available as F734-95(2011) developed by Committee F07.08, ASTM BOS Volume 15.03.
  • F736 Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight has been reapproved, available as F736-95(2011) developed by Committee F07.08, ASTM BOS Volume 15.03.
  • F780 Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis has been reapproved, available as F780-93a(2012) developed by Committee F27.30, ASTM BOS Volume 15.07.
  • F1129/F1129M Standard Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids has been revised to F1129/F1129M-12 developed by Committee F20.21, ASTM BOS Volume 11.05.
  • F1657/F1657M Standard Practice for Emergency Joining of Booms with Incompatible Connectors has been editorially changed, available as F1657/F1657M-96(2012)e1 developed by Committee F20.11, ASTM BOS Volume 11.05.

Published in international.