ISO PUBLICATIONS

Issue 40 – July 2012

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 630-3:2012 Structural steels. Technical delivery conditions for fine-grain structural steels
  • ISO 630-4:2012 Structural steels. Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
  • ISO 898-5:2012 (Edition 3) Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
  • ISO 1183-1:2012 (Edition 2) Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pyknometer method and titration method
  • ISO 1219-1:2012 (Edition 3) Fluid power systems and components. Graphical symbols and circuit diagrams. Graphical symbols for conventional use and data-processing applications
  • ISO 2782-1:2012 Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Differential-pressure methods
  • ISO 2782-2:2012 Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Equal pressure method
  • ISO 2951:2012 (Edition 2) Rubber, vulcanized or thermoplastic. Determination of insulation resistance
  • ISO/TS 3691-8:2012 Industrial trucks. Safety requirements and verification. Regional requirements for countries outside the European Community
  • ISO 4106:2012 (Edition 4) Motorcycles. Engine test code. Net power
  • ISO 4138:2012 (Edition 4) Passenger cars. Steady-state circular driving behaviour. Open-loop test methods
  • ISO 5296:2012 (Edition 2) Synchronous belt drives. Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH. Metric and inch dimensions
  • ISO 5832-2:1999 Implants for surgery. Metallic materials. Unalloyed titanium
  • ISO 6876:2012 (Edition 3) Dentistry. Root canal sealing materials
  • ISO 6974-1:2012 (Edition 2) Natural gas. Determination of composition and associated uncertainty by gas chromatography. General guidelines and calculation of composition
  • ISO 6974-2:2012 (Edition 2) Natural gas. Determination of composition and associated uncertainty by gas chromatography. Uncertainty calculations
  • ISO 7000:2012 (Edition 4) Graphical symbols for use on equipment. Registered symbols
  • ISO 7076-1:2012 Fire protection. Foam fire extinguishing systems. Foam proportioning equipment
  • ISO 7076-2:2012 Fire protection. Foam fire extinguishing systems. Low expansion foam equipment
  • ISO 7240-10:2012 (Edition 2) Fire detection and alarm systems. Point-type flame detectors
  • ISO 7513:1990 Instant tea in solid form. Determination of moisture content (loss in mass at 103ºC)
    AMENDMENT 1:May 2012
  • ISO 7720:2012 (Edition 3) Prevailing torque type all-metal hexagon nuts, style 2. Property class 9
  • ISO 8578:2012 (Edition 2) Microscopes. Marking of objectives and eyepieces
  • ISO 8854:2012 (Edition 2) Road vehicles. Alternators with regulators. Test methods and general requirements
  • ISO 9714-1:2012 (Edition 2) Orthopaedic drilling instruments. Drill bits, taps and countersink cutters
  • ISO/IEC 9834-1:2012 (Edition 4) Information technology. Procedures for the operation of object identifier registration authorities: General procedures and top arcs of the international object identifier tree
  • ISO 10285:2007 Rolling bearings. Sleeve type linear ball bearings. Boundary dimensions and tolerances
    AMENDMENT 1:May 2012
  • ISO 10509:2012 (Edition 2) Hexagon flange head tapping screws
  • ISO/TS 10797:2012 Nanotechnologies. Characterization of single wall carbon nanotubes using transmission electron microscopy
  • ISO 11347:2012 Ships and marine technology. Large yachts. Measurement and assessment of the visual appearance of coatings
  • ISO 11350:2012 Water quality. Determination of the genotoxicity of water and waste water. Salmonella/microsome fluctuation test (Ames fluctuation test)
  • ISO 11504:2012 Soil quality. Assessment of impact from soil contaminated with petroleum hydrocarbons
  • ISO/TS 11669:2012 Translation projects. General guidance
  • ISO 11833-1:2012 (Edition 3) Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics. Sheets of thickness not less than 1 mm
  • ISO 12230:2012 (Edition 2) Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
  • ISO/TR 12296:2012 Ergonomics. Manual handling of people in the healthcare sector
  • ISO 12543-6:2011 Glass in building. Laminated glass and laminated safety glass. Appearance
    CORRIGENDUM 1:May 2012
  • ISO 12782-1:2012 Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials. Extraction of amorphous iron oxides and hydroxides with ascorbic acid
  • ISO 12782-2:2012 Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials. Extraction of crystalline iron oxides and hydroxides with dithionite
  • ISO 12782-3:2012 Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials. Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid
  • ISO 12782-4:2012 Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials. Extraction of humic substances from solid samples
  • ISO 12782-5:2012 Soil quality. Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials. Extraction of humic substances from aqueous samples
  • ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods
  • ISO 13044-1:2012 Road vehicles. 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations. General requirements and definitions
  • ISO 13092:2012 Titanium and titanium alloys. Titanium sponge
  • ISO/TR 13185-1:2012 Intelligent transport systems. Vehicle interface for provisioning and support of ITS services. General information and use case definition
  • ISO 13296:2012 (Edition 3) Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
  • ISO 13577-1:2012 Industrial furnaces and associated processing equipment. Safety. General requirements
  • ISO/TS 13605:2012 Solid mineral fuels. Major and minor elements in hard coal ash and coke ash. Wavelength dispersive X-ray fluorescence spectrometric method
  • ISO 13975:2012 Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems. Method by measurement of bio gas production
  • ISO/TR 14047:2012 (Edition 2) Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to impact assessment situations
  • ISO/TR 14049:2012 (Edition 2) Environmental management. Life cycle assessment. Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis
  • ISO/TR 14121-2:2012 (Edition 2) Safety of machinery. Risk assessment. Practical guidance and examples of methods
  • ISO/IEC 14496-10:2012 (CD-ROM) Information technology. Coding of audio-visual objects. Advanced video coding
  • ISO 14934-3:2012 (Edition 2) Fire tests. Calibration and use of heat flux meters. Secondary calibration method
  • ISO 15152:2003 Tobacco. Determination of the content of total alkaloids as nicotine. Continuous-flow analysis method
    AMENDMENT 1:May 2012
  • ISO 15153:2003 Tobacco. Determination of the content of reducing substances. Continuous-flow analysis method
    AMENDMENT 1:May 2012
  • ISO 15154:2003 Tobacco. Determination of the content of reducing carbohydrates. Continuous-flow analysis method
    AMENDMENT 1:May 2012
  • ISO 15163:2012 Milk and milk products. Calf rennet and adult bovine rennet. Determination by chromatography of chymosin and bovine pepsin contents
  • ISO 15202-1:2012 (Edition 2) Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
  • ISO/IEC 15444-10:2011 (Edition 2) Information technology. JPEG 2000 image coding system: Extensions for three-dimensional data
  • ISO 15517:2003 Tobacco. Determination of nitrate content. Continuous-flow analysis method
    AMENDMENT 1:May 2012
  • ISO 15686-2:2012 (Edition 2) Buildings and constructed assets. Service life planning. Service life prediction procedures
  • ISO/IEC 15938-9:2005 Information technology. Multimedia content description interface. Profiles and levels
    AMENDMENT 1:June 2012
  • ISO 16000-19:2012 Indoor air. Sampling strategy for moulds
  • ISO 16534:2012 Thermal insulating products for building applications. Determination of compressive creep
  • ISO 16535:2012 Thermal insulating products for building applications. Determination of long-term water absorption by immersion
  • ISO 16536:2012 Thermal insulating products for building applications. Determination of long-term water absorption by diffusion
  • ISO 16537:2012 Thermal insulating products for building applications. Determination of shear behaviour
  • ISO 16544:2012 Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions
  • ISO 16545:2012 Thermal insulating products for building applications. Determination of behaviour under cyclic loading
  • ISO 16546:2012 Thermal insulating products for building applications. Determination of freeze-thaw resistance
  • ISO 17088:2012 (Edition 2) Specifications for compostable plastics
  • ISO 17123-4:2012 (Edition 2) Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Electro-optical distance meters (EDM measurements to reflectors)
  • ISO 17123-6:2012 (Edition 2) Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Rotating lasers
  • ISO 17442:2012 Financial services. Legal Entity Identifier (LEI)
  • ISO/IEC 18023-1:2006 (CD-ROM) Information technology. SEDRIS. Functional specification
    AMENDMENT 1:May 2012
  • ISO/IEC 18023-3:2006 (CD-ROM) Information technology. SEDRIS. Transmittal format binary encoding
    AMENDMENT 1:May 2012
  • ISO 18926:2012 (Edition 2) Imaging materials. Information stored on magneto-optical (MO) discs. Method for estimating the life expectancy based on the effects of temperature and relative humidity
  • ISO 20252:2012 (Edition 2) Market, opinion and social research. Vocabulary and service requirements
  • ISO 21013-4:2012 Cryogenic vessels. Pilot operated pressure-relief devices. Pressure-relief accessories for cryogenic service
  • ISO 21461:2012 (Edition 3) Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
  • ISO 21940-23:2012 Mechanical vibration. Rotor balancing. Enclosures and other protective measures for the measuring station of balancing machines
  • ISO 22282-1:2012 Geotechnical investigation and testing. Geohydraulic testing. General rules
  • ISO 22282-2:2012 Geotechnical investigation and testing. Geohydraulic testing. Water permeability tests in a borehole using open systems
  • ISO 22282-3:2012 Geotechnical investigation and testing. Geohydraulic testing. Water pressure tests in rock
  • ISO 22282-4:2012 Geotechnical investigation and testing. Geohydraulic testing. Pumping tests
  • ISO 22282-5:2012 Geotechnical investigation and testing. Geohydraulic testing. Infiltrometer tests
  • ISO 22282-6:2012 Geotechnical investigation and testing. Geohydraulic testing. Water permeability tests in a borehole using closed systems
  • ISO 22300:2012 Societal security. Terminology
  • ISO 24443:2012 Determination of sunscreen UVA photoprotection in vitro
  • ISO/IEC 24730-21:2012 Information technology. Real time locating systems (RTLS). Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme
  • ISO/IEC 24730-22:2012 Information technology. Real-time locating systems (RTLS). Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme
  • ISO/IEC 24800-6:2012 (CD-ROM) Information technology. JPSearch. Reference software
  • ISO/TR 26368:2012 Environmental damage limitation from firefighting water run-off
  • ISO/TS 26683-1:2012 Intelligent transport systems. Freight land conveyance content identification and communication (FLC-CIC). Context, architecture and referenced standards
  • ISO/IEC 29160:2012 Information technology. Radio frequency identification for item management. RFID emblem
  • ISO/IEC 29192-1:2012 Information technology. Security techniques. Lightweight cryptography. General
  • ISO 30005:2012 Ships and marine technology. Ship recycling management systems. Information control for hazardous materials in the manufacturing chain of ship building and ship operations

Published in international.