BRITISH STANDARDS

Issue 40 – July 2012

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATION

The publication listed below is a new or revised British Standard that was made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 5896:2012 High tensile steel wire and strand for the prestressing of concrete. Specification
    Supersedes BS 5896:1980

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 30-1-4:2012 Domestic cooking appliances burning gas. Safety. Appliances having one or more burners with an automatic burner control system
    Supersedes BS EN 30-1-4:2002
  • BS EN 325:2012 Wood-based panels. Determination of dimensions of test pieces
    Supersedes BS EN 325:1993
  • BS EN 1024:2012 Clay roofing tiles for discontinuous laying. Determination of geometric characteristics
    Supersedes BS EN 1024:1997
  • BS EN 1034-8:2012 Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Refining plants
  • BS EN 1425:2012 (BS 2000-457:2012) Bitumen and bituminous binders. Characterization of perceptible properties
    Supersedes BS EN 1425:2000
  • BS EN 1467:2012 Natural stone. Rough blocks. Requirements
    Supersedes BS EN 1467:2003
  • BS EN 1468:2012 Natural stone. Rough slabs. Requirements
    Supersedes BS EN 1468:2003
  • BS EN ISO 1974:2012 Paper. Determination of tearing resistance. Elmendorf method
    Supersedes BS EN 21974:1994
  • BS EN 3745-301:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Attenuation
    Supersedes BS EN 3745-301:2002
  • BS EN ISO 4007:2012 Personal protective equipment. Eye and face protection. Vocabulary
    Supersedes BS EN 165:2005
  • BS EN 4531-001:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Technical specification
    Supersedes BS EN 4531-001:2007
  • BS EN 4531-002:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Specification of performance and contact arrangements
    Supersedes BS EN 4531-002:2007
  • BS EN 4531-003:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Square flange receptacle. Product standard
    Supersedes BS EN 4531-003:2007
  • BS EN 4531-004:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Jam nut receptacle. Product standard
    Supersedes BS EN 4531-004:2007
  • BS EN 4531-005:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Plug. Product standard
    Supersedes BS EN 4531-005:2007
  • BS EN 4531-101:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Optical contact for EN 4641-100 cable. 55ºC to 125ºC. Product standard
    Supersedes BS EN 4531-101:2007
  • BS EN 4531-901:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Filler plugs. Product standard
  • BS EN 4697:2012 Aerospace series. General and installation requirements for passenger seat fittings
  • BS EN 4817:2012 Aerospace series. Passive UHF RFID tags intended for aircraft use
  • BS EN 4818:2012 Aerospace series. Passive HF RFID tags intended for aircraft use
  • BS EN 4819:2012 Aerospace series. Contact Memory Button (CMB) tags intended for aircraft use
  • BS EN ISO 6433:2012 Technical product documentation. Part references
    Supersedes BS EN ISO 6433:1995
  • BS EN ISO 9227:2012 Corrosion tests in artificial atmospheres. Salt spray tests
    Supersedes BS EN ISO 9227:2006
  • BS EN ISO 9906:2012 Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3
    Supersedes BS EN ISO 9906:2000
  • BS EN ISO 11930:2012 Cosmetics. Microbiology. Evaluation of the antimicrobial protection of a cosmetic product
  • BS EN ISO 12153:2012 Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys. Classification
  • BS EN 12451:2012 Copper and copper alloys. Seamless, round tubes for heat exchangers
    Supersedes BS EN 12451:1999
  • BS EN 12452:2012 Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
    Supersedes BS EN 12452:1999
  • BS EN 12492:2012 Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
    Supersedes BS EN 12492:2000
  • BS EN 12697-6:2012 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
    Supersedes BS EN 12697-6:2003
  • BS EN 12697-11:2012 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the affinity between aggregate and bitumen
    Supersedes BS EN 12697-11:2005
  • BS EN 12697-19:2012 Bituminous mixtures. Test methods for hot mix asphalt. Permeability of specimen
    Supersedes BS EN 12697-19:2004
  • BS EN 12697-20:2012 Bituminous mixtures. Test methods for hot mix asphalt. Indentation using cube or cylindrical specimens (CY)
    Supersedes BS EN 12697-20:2003
  • BS EN 12697-21:2012 Bituminous mixtures. Test methods for hot mix asphalt. Indentation using plate specimens
    Supersedes BS EN 12697-21:2003
  • BS EN 12697-24:2012 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue
    Supersedes BS EN 12697-24:2004
  • BS EN 12697-30:2012 Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by impact compactor
    Supersedes BS EN 12697-30:2004
  • BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
  • BS EN 12697-46:2012 Bituminous mixtures. Test methods for hot mix asphalt. Low temperature cracking and properties by uniaxial tension tests
  • BS EN 12704:2012 Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives
    Supersedes BS EN 12704:2000
  • BS EN 13075-1:2012 (BS 2000-494:2012) Bitumen and bituminous binders. Determination of breaking behaviour. Determination of breaking value of cationic bituminous emulsions, mineral filler method
    Supersedes BS EN 13075-1:2009
  • BS EN 13110:2012 LPG equipment and accessories. Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG). Design and construction
    Supersedes BS EN 13110:2002
  • BS EN 13126-13:2012 Building hardware. Hardware for windows and balcony doors. Requirements and test methods. Sash balances
    Supersedes DD CEN/TS 13126-13:2004
  • BS EN 13126-14:2012 Building hardware. Hardware for windows and balcony doors. Requirements and test methods. Sash fasteners
    Supersedes DD CEN/TS 13126-14:2004
  • BS EN 13967:2012 Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics
    Supersedes BS EN 13967:2004+A1:2006
  • BS EN ISO 14045:2012 Environmental management. Eco-efficiency assessment of product systems. Principles, requirements and guidelines
  • BS EN 14617-4:2012 Agglomerated stone. Test methods. Determination of the abrasion resistance
    Supersedes BS EN 14617-4:2005
  • BS EN 14617-5:2012 Agglomerated stone. Test methods. Determination of freeze and thaw resistance
    Supersedes BS EN 14617-5:2005
  • BS EN 14617-6:2012 Agglomerated stone. Test methods. Determination of thermal shock resistance
    Supersedes BS EN 14617-6:2005
  • BS EN 14617-10:2012 Agglomerated stone. Test methods. Determination of chemical resistance
    Supersedes BS EN 14617-10:2005
  • BS EN 14617-12:2012 Agglomerate stone. Test methods. Determination of dimensional stability
    Supersedes BS EN 14617-12:2005
  • BS EN 14769:2012 (BS 2000-535:2012) Bitumen and bituminous binders. Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
    Supersedes BS EN 14769:2005
  • BS EN 14770:2012 (BS 2000-536:2012) Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
    Supersedes BS EN 14770:2005
  • BS EN 14771:2012 (BS 2000-533:2012) Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR)
    Supersedes BS EN 14771:2005
  • BS EN 14906:2012 Leather. Leather for automotive. Test methods and testing parameters
    Supersedes DD CEN/TS 14906:2004
  • BS EN 14909:2012 Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics
    Supersedes BS EN 14909:2006
  • BS EN 15202:2012 LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections
    Supersedes BS EN 15202:2006
  • BS EN 15583-2:2012 Winter maintenance equipment. Snow ploughs. Testing criteria and their requirements
  • BS EN 15830:2012 Rough-terrain variable reach trucks. Visibility. Test methods and verification
  • BS EN 15882-4:2012 Extended application of results from fire resistance tests for service installations. Linear joint seals
  • BS EN 16057:2012 Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method
  • BS EN 16058:2012 Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of surface coatings with nickel layers. Long-term test method
  • BS EN 16194:2012 Mobile non-sewer-connected toilet cabins. Requirements of services and products relating to the deployment of cabins and sanitary products
  • BS EN 16204:2012 Foodstuffs. Determination of lipophilic algal toxins (okadaic acid group toxins, yessotoxins, azaspiracids, pectenotoxins) in shellfish and shellfish products by LC-MS/MS
  • BS EN ISO 16834:2012 Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels. Classification
    Supersedes BS EN ISO 16834:2007
  • BS EN ISO 17653:2012 Resistance welding. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
    Supersedes BS EN ISO 17653:2003
  • BS EN ISO 18275:2012 Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification
    Supersedes BS EN 757:1997
  • BS EN ISO 21952:2012 Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels. Classification
    Supersedes BS EN ISO 21952:2007
  • BS EN ISO 22825:2012 Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys
    Supersedes BS EN ISO 22825:2006
  • BS EN ISO 24598:2012 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification
    Supersedes BS EN ISO 24598:2007
  • BS EN ISO 26986:2012 Resilient floor coverings. Expanded (cushioned) poly(vinyl chloride) floor covering. Specification
  • BS EN ISO 27953-1:2011 (CD-ROM) Health informatics. Individual case safety reports (ICSRs) in pharmacovigilance. Framework for adverse event reporting
  • BS EN 50083-2:2012 Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for equipment
    Supersedes BS EN 50083-2:2006
  • BS EN 50367:2012 Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
    Supersedes BS EN 50367:2006
  • BS EN 50441-1:2012 Cables for indoor residential telecommunication installations. Unscreened cables. Grade 1
    Supersedes BS EN 50441-1:2006
  • BS EN 50545-1:2011 Electrical apparatus for the detection and measurement of toxic and combustible gases in car parks and tunnels. General performance requirements and test methods for the detection and measurement of carbon monoxide and nitrogen oxides
  • BS EN 50574:2012 Collection, logistics & treatment requirements for end-of-life household appliances containing volatile fluorocarbons or volatile hydrocarbons
  • BS EN 50580:2012 Safety of hand-held electric motor operated tools. Particular requirements for spray guns
    Supersedes BS EN 50144-1:1999, BS EN 50144-2-7:2001, BS EN 50260-1:2002 and BS EN 50260-2-7:2002 which remain current
  • BS EN 55032:2012 Electromagnetic compatibility of multimedia equipment. Emission requirements
  • BS EN 60118-15:2012 Electroacoustics. Hearing aids. Methods for characterising signal processing in hearing aids with a speech-like signal
  • BS EN 60352-5:2012 Solderless connections. Press-in connections. General requirements, test methods and practical guidance
    Supersedes BS EN 60352-5:2008
  • BS EN 60512-1-100:2012 Connectors for electronic equipment. Tests and measurements. General. Applicable publications
    Supersedes BS EN 60512-1-100:2006
  • BS EN 60544-5:2012 Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service
    Supersedes BS EN 60544-5:2003
  • BS EN 60662:2012 High-pressure sodium vapour lamps. Performance specifications
    Supersedes BS EN 60662:1993
  • BS EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Transient loss
    Supersedes BS EN 61300-3-28:2002
  • BS EN 61300-3-33:2012 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Withdrawal force from a resilient alignment sleeve using gauge pins
    Supersedes BS EN 61300-3-33:1999
  • BS EN 61784-5-2:2012 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 2
    Supersedes BS EN 61784-5-2:2008
  • BS EN 61784-5-3:2012 Industrial communication networks. Profiles. Installation of fieldbuses. Installation profiles for CPF 3
    Supersedes BS EN 61784-5-3:2008
  • BS EN 62034:2012 Automatic test systems for battery powered emergency escape lighting
    Supersedes BS EN 62034:2006 which remains current
  • BS EN 62040-3:2011 Uninterruptible power systems (UPS). Method of specifying the performance and test requirements
    Supersedes BS EN 62040-3:2001
  • BS EN 62047-14:2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials
  • BS EN 62149-1:2012 Fibre optic active components and devices. Performance standards. General and guidance
    Supersedes BS EN 62149-1:2004
  • BS EN 62442-1:2011 Energy performance of lamp controlgear. Controlgear for fluorescent lamps. Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
    Supersedes BS EN 50294:1998 which remains current

BS ENs implemented by amendment

  • BS EN ISO 14065:2012 Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
    Implementation of European Standard EN ISO 14065 by amendment to BS ISO 14065:2007

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 666:2012 Machine tools. Mounting of grinding wheels by means of hub flanges
    Supersedes BS ISO 666:1996
  • BS ISO 888:2012 Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths
    Supersedes BS 7345:1990
  • BS ISO 5429:2012 Coated abrasives. Flap wheels with incorporated flanges or separate flanges
    Supersedes BS ISO 5429:2005
  • BS ISO 7041:2012 Prevailing torque type hexagon nuts (with nonmetallic insert), style 2. Property classes 9 and 12
    Supersedes BS ISO 7041:2002
  • BS ISO 9352:2012 Plastics. Determination of resistance to wear by abrasive wheels
    Supersedes BS 2782-3:Method 370:1996
  • BS ISO/IEC 9798-4:1999 Information technology. Security techniques. Entity authentication. Mechanisms using a cryptographic check function
    Supersedes BS ISO/IEC 9798-4:1995
  • BS ISO 11396:2012 Crocodile skins. Presentation, description of defects, grading on the basis of defects size (length) and origin
  • BS ISO 11398:2012 Raw ostrich skins. Description of defects, guidelines for presentation and grading on basis of defects
  • BS ISO 11452-9:2012 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Portable transmitters
  • BS ISO 11658:2012 Cardiovascular implants and extracorporeal systems. Blood/tissue contact surface modifications for extracorporeal perfusion systems
  • BS ISO 11891:2012 Hot formed helical compression springs. Technical specifications
  • BS ISO 12010:2012 Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
  • BS ISO 13379-1:2012 Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques. General guidelines
    Together with BS ISO 13379-2 and BS ISO 13379-3, it supersedes BS ISO 13379:2003, which will be withdrawn on publication of BS ISO 13379-2 and BS ISO 13379-3
  • BS ISO 15174:2012 Milk and milk products. Microbial coagulants. Determination of total milk-clotting activity
  • BS ISO 15500-2:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Performance and general test methods
  • BS ISO 15500-3:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Check valve
  • BS ISO 15500-4:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual valve
  • BS ISO 15500-5:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual cylinder valve
  • BS ISO 15500-6:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Automatic valve
  • BS ISO 15500-9:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure regulator
  • BS ISO 15500-13:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure relief device (PRD)
  • BS ISO 15500-14:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Excess flow valve
  • BS ISO 15500-16:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Rigid fuel line in stainless steel
  • BS ISO 15500-17:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Flexible fuel line
  • BS ISO 15500-18:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Filter
  • BS ISO 15500-19:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Fittings
  • BS ISO/IEC 16680:2012 Information technology. The Open Group Service Integration Maturity Model (OSIMM)
  • BS ISO 17497-2:2012 Acoustics. Sound-scattering properties of surfaces. Measurement of the directional diffusion coefficient in a free field
  • BS ISO 18913:2012 Imaging materials. Permanence. Vocabulary
    Supersedes BS ISO 18913:2003
  • BS ISO 18933:2012 Imaging materials. Magnetic tape. Care and handling practices for extended usage
    Supersedes BS ISO 18933:2006
  • BS ISO 18936:2012 Imaging materials. Processed colour photographs. Methods for measuring thermal stability
  • BS ISO 18944:2012 Imaging materials. Reflection colour photographic prints. Test print construction and measurement
  • BS ISO 20462-3:2012 Photography. Psychophysical experimental methods for estimating image quality. Quality ruler method
    Supersedes BS ISO 20462-3:2005
  • BS ISO 21360-1:2012 Vacuum technology. Standard methods for measuring vacuum-pump performance. General description
    Supersedes BS ISO 21360:2007
  • BS ISO 21360-2:2012 Vacuum technology. Standard methods for measuring vacuum-pump performance. Positive displacement vacuum pumps
  • BS ISO 22301:2012 Societal security. Business continuity management systems. Requirements
    Supersedes BS 25999-2:2007 which remains current
  • BS ISO 23145-2:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders. Untapped density
  • BS ISO 24115:2012 Green coffee. Procedure for calibration of moisture meters. Routine method
  • BS ISO 27730:2012 Information and documentation. International standard collection identifier (ISCI)

Published Documents

  • PD CEN/TS 1317-8:2012 Road restraint systems. Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers
  • PD CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for assessment of conformity
    Supersedes DD ENV 1401-2:2001
  • PD ISO/TR 11219:2012 Information and documentation. Qualitative conditions and basic statistics for library buildings. Space, function and design
  • PD ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
  • PD ISO/TR 13014:2012 Nanotechnologies. Guidance on physicochemical characterization of engineered nanoscale materials for toxicologic assessment
  • PD CEN/TS 15430-2:2012 Winter and road service area maintenance equipment. Data acquisition and transmission. Protocol for data transfer between information supplier and client application server
  • PD CEN/TR 16338:2012 Foodstuffs. Detection of food allergens. Template for supplying information about immunological methods and molecular biological methods
  • PD CEN/TR 16349:2012 Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete
  • PD ISO/TS 19218-2:2012 Medical devices. Hierarchical coding structure for adverse events. Evaluation codes
    Together with DD ISO/TS 19218-1:2011, it supersedes DD ISO/TS 19218:2005, which is withdrawn
  • PD ISO/TR 24578:2012 Hydrometry. Acoustic Doppler profiler. Method and application for measurement of flow in open channels
  • PD IEC/TR 60479-4:2011 Effects of current on human beings and livestock. Effects of lightning strokes
    Supersedes PD IEC/TR 60479-4:2004
  • PD IEC/PAS 62647-1:2011 Process management for avionics. Aerospace and defence electronic systems containing leadfree solder. Lead-free management
  • PD IEC/TS 62668-1:2012 Process management for avionics. Counterfeit prevention. Avoiding the use of counterfeit, fraudulent and recycled electronic components

Publicly available specifications

Publicly Available Specifications are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 138:2012 Disposal of manufacturing process waste containing manufactured nano-objects. Guide
  • PAS 139:2012 Detection and characterization of manufactured nano-objects in complex matrices. Guide

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 1363-1:1995+A4:2012 13 A plugs, socket-outlets, adaptors and connection units. Specification for rewirable and non-rewirable 13 A fused plugs
    AMENDMENT 4
  • BS 1363-2:1995+A4:2012 13 A plugs, socket-outlets, adaptors and connection units. Specification for 13 A switched and unswitched socket-outlets
    AMENDMENT 4
  • BS 1363-4:1995+A4:2012 13 A plugs, socket-outlets, adaptors and connection units. Specification for 13 A fused connection units switched and unswitched
    AMENDMENT 4
  • BS 3621:2007+A2:2012 Thief resistant lock assembly. Key egress
    AMENDMENT 2
  • BS 7430:2011 Code of practice for protective earthing of electrical installations
    CORRIGENDUM 1
  • BS 8006-1:2010 Code of practice for strengthened/reinforced soils and other fills
    CORRIGENDUM 1
  • BS 8621:2007+A2:2012 Thief resistant lock assembly. Keyless egress
    AMENDMENT 2
  • BS 10621:2007+A2:2012 Thief resistant dual-mode lock assembly
    AMENDMENT 2
  • BS EN ISO 1135-4:2012 Transfusion equipment for medical use. Transfusion sets for single use
    CORRIGENDUM 1
  • BS EN ISO 9241-143:2012 Ergonomics of human-system interaction. Forms
    CORRIGENDUM 1
  • BS EN 13053:2006+A1:2011 Ventilation for buildings. Air handling units. Rating and performance for units, components and sections
    AMENDMENT 1
  • BS EN 13739-2:2011 Agricultural machinery. Solid fertilizer broadcasters and full width distributors. Environmental protection. Test methods
    CORRIGENDUM 1
  • BS EN ISO 14065:2012 Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
    CORRIGENDUM 1
  • BS EN 15618:2009+A1:2012 Rubber- or plastic-coated fabrics. Upholstery fabrics. Classification and methods of test
    AMENDMENT 1
  • BS EN 15876-1:2010+A1:2012 Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to EN 15509. Test suite structure and test purposes
    AMENDMENT 1
  • BS EN 60061-2:1993+A44:2012 Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
    AMENDMENT 44
  • BS EN 60335-2-30:2009+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for room heaters
    AMENDMENT 11
  • BS EN 60335-2-36:2002+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
    AMENDMENT 11
  • BS EN 60335-2-37:2002+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for commercial electric deep fat fryers
    AMENDMENT 11
  • BS EN 60335-2-42:2003+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
    AMENDMENT 11
  • BS EN 60335-2-47:2003+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for commercial electric boiling pans
    AMENDMENT 11
  • BS EN 60335-2-48:2003+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for commercial electric grillers and toasters
    AMENDMENT 11
  • BS EN 60335-2-49:2003+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for commercial electric appliances for keeping food and crockery warm
    AMENDMENT 11
  • BS EN 60598-2-18:1994+A1:2012 Luminaires. Particular requirements. Luminaires for swimming pools and similar applications
    AMENDMENT 1
  • BS EN 60669-2-1:2004+A12:2010 Switches for household and similar fixed electrical installations. Particular requirements. Electronic switches
    CORRIGENDUM 3
  • BS EN 60947-3:2009+A1:2012 Low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
    AMENDMENT 1
  • BS EN 61000-4-15:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications
    CORRIGENDUM 1
  • BS EN 61000-4-25:2002+A1:2012 Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems
    AMENDMENT 1
  • BS EN 61008-1:2004+A13 :2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs). General rules
    AMENDMENT 13
  • BS EN 61009-1:2004+A14:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). General rules
    AMENDMENT 14
  • BS EN 61730-2:2007+A1:2012 Photovoltaic (PV) module safety qualification. Requirements for testing
    AMENDMENT 1
  • BS EN 62439-4:2010+A1:2012 Industrial communication networks. High availability automation networks. Crossnetwork Redundancy Protocol (CRP)
    AMENDMENT 1
  • BS ISO 5130:2007+A1:2012 Acoustics. Measurements of sound pressure level emitted by stationary road vehicles
    AMENDMENT 1
  • BS ISO 6552:1980 Automatic steam traps. Definition of technical terms
    CORRIGENDUM 1
  • BS ISO/IEC 10118-3:2004+A1:2006 Information technology. Security techniques. Hash-functions. Dedicated hash-functions
    AMENDMENT 1
  • BS ISO/IEC 14443-1:2008+A2:2012 Identification cards. Contactless integrated circuit cards. Proximity cards. Physical characteristics
    AMENDMENT 1
  • BS ISO/IEC 19794-2:2011 Information technology. Biometric data interchange formats. Finger minutiae data
    CORRIGENDUM 1
  • BS ISO/IEC 19794-4:2011 Information technology. Biometric data interchange formats. Finger image data
    CORRIGENDUM 1
  • BS ISO/IEC 19794-6:2011 Information technology. Biometric data interchange formats. Iris image data
    CORRIGENDUM 1
  • BS ISO/IEC 19794-8:2011 Information technology. Biometric data interchange formats. Finger pattern skeletal data
    CORRIGENDUM 1
  • BS ISO/IEC 19794-9:2011 Information technology. Biometric data interchange formats. Vascular image data
    CORRIGENDUM 1

British Standards withdrawn

  • BS 2782-3:Method 370:1996 (ISO 9352:1995) Methods of testing plastics. Mechanical properties. Determination of resistance to wear by abrasive wheels
    Superseded by BS ISO 9352:2012
  • BS 7345:1990 (ISO 888:1976) Specification for nominal lengths of bolts, screws and studs and thread lengths for general purpose bolts
    Superseded by BS ISO 888:2012
  • BS EN 165:2005 Personal eye-protection. Vocabulary
    Superseded by BS EN ISO 4007:2012
  • BS EN 414:2000 Safety of machinery. Rules for the drafting and presentation of safety standards
    This standard is superseded by CEN Guide 414:2004 which is not going to be implemented by BSI and which is available for download from the CEN website
  • BS EN 757:1997 Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification
    Superseded by BS EN ISO 18275:2012
  • DD ENV 1401-2:2001 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity
    Superseded by PD CEN/TS 1401-2:2012
  • BS EN ISO 12737:2010 Metallic materials. Determination of plane strain fracture toughness
    This standard has been withdrawn as a result of BT C 036/2012 [BT N 8904]. The international standard, ISO 12737:2010 has been withdrawn by ISO
  • DD CEN/TS 13126-13:2004 Building hardware, fittings for windows and door height windows. Requirements and test methods. Sash balances
    Superseded by BS EN 13126-13:2012
  • DD CEN/TS 14906:2004 Leather. Upholstery leather characteristics. Guide for the selection of leather for automotive
    Superseded by BS EN 14906:2012
  • BS EN 16001:2009 Energy management systems. Requirements with guidance for use
    Superseded by BS EN ISO 50001:2011
  • BS EN 21974:1994 (ISO 1974:1990) Paper. Determination of tearing resistance (Elmendorf method)
    Superseded by BS EN ISO 1974:2012
  • BS EN 55012:2007 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers
    Superseded by BS EN 55012:2007+A1:2009
  • BS EN 55016-1-4:2007+A1:2008 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Radiated disturbances
    Superseded by BS EN 55016-1-4:2007+A2:2009
  • BS EN 55103-1:1997 Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Emission
    Superseded by BS EN 55103-1:2009
  • BS EN 55103-2:1997 Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Immunity
    Superseded by BS EN 55103-2:2009
  • BS EN 60095-4:1993 Lead-acid starter batteries. Dimensions of batteries for heavy commercial vehicles
    Superseded by BS EN 50342-4:2009
  • BS EN 61000-3-2:2006 Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ??16 A per phase)
    Superseded by BS EN 61000-3-2:2006+A2:2009
  • BS EN 61000-4-13:2002 Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signalling at A.C. power port, low frequency immunity tests
    Superseded by BS EN 61000-4-13:2002+A1:2009
  • BS EN 61000-4-14:1999 Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase
    Superseded by BS EN 61000-4-14:1999+A2:2009
  • BS EN 61000-4-34:2007 Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
    Superseded by BS EN 61000-4-34:2007+A1:2009
  • BS EN 61547:1996 Specification for equipment for general lighting purposes. EMC immunity requirements
    Superseded by BS EN 61547:2009
  • BS EN 130502:1998 Harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polycarbonate film dielectric capacitors for direct current. Assessment level EZ
    This standard has been withdrawn due to the CENELEC Technical Board Decision 140/C034 to withdraw obsolete EN standards
  • BS EN 131700:1998 Harmonized system of quality assessment for electronic components. Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
    This standard has been withdrawn due to the CENELEC Technical Board Decision 140/C034 to withdraw obsolete EN standards
  • BS EN 131701:1998 Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric. Assessment level E
    This standard has been withdrawn due to the CENELEC Technical Board Decision 140/C034 to withdraw obsolete EN standards
  • BS EN 131702:1998 Harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric. Assessment level EZ
    This standard has been withdrawn due to the CENELEC Technical Board Decision 140/C034 to withdraw obsolete EN standards
  • BS EN 131802:1998 Harmonized system of quality assessment for electronic components. Blank detail specification: fixed polypropylene film dielectric metal foil D.C. capacitors. Assessment level EZ
    This standard has been withdrawn due to the CENELEC Technical Board Decision 140/C034 to withdraw obsolete EN standards
  • BS ISO 6549:1999 Road vehicles. Procedure for H- and R-point determination
    This standard has been withdrawn as it is identical to ISO 6549:1999 which has been withdrawn by ISO following a review by ISO/TC22 SC13
  • DD ISO/TS 19218:2005 Medical devices. Coding structure for adverse event type and cause
    Superseded by DD ISO/TS 19218-1:2011 and PD ISO/TS 19218-2:2012

Published in international.