ASTM STANDARDS

Issue 41 – August 2012

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications has been revised to A193/A193M-12a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel has been revised to A203/A203M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A204/A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum has been revised to A204/A204M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A225/A225M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel has been revised to A225/A225M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A285/A285M Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength has been revised to A285/A285M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A302/A302M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel has been revised to A302/A302M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings has been revised to A403/A403M-12 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A455/A455M Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese has been revised to A455/A455M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing has been revised (with designation change) to A513/A513M-12 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A612/A612M Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service has been revised to A612/A612M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A662/A662M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service has been revised to A662/A662M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A734/A734M Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered has been revised to A734/A734M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A735/A735M Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service has been revised to A735/A735M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A738/A738M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service has been revised to A738/A738M-12 developed by Committee A01.11, ASTM BOS Volume 01.04.
  • B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings has been editorially changed, available as B108/B108M-12e1 developed by Committee B07.01, ASTM BOS Volume 02.02.
  • B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes has been revised to B418-12 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B792 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting has been revised to B792-12 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B793 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds has been revised to B793-12 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • C50/C50M Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products has been revised (with designation change) to C50/C50M-12 developed by Committee C07.06, ASTM BOS Volume 04.01.
  • C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency has been revised to C305-12 developed by Committee C01.22, ASTM BOS Volume 04.01.
  • C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) has been reapproved, available as C471M-01(2012) developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C552 Standard Specification for Cellular Glass Thermal Insulation has been revised to C552-12 developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation has been revised to C591-12 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C595/C595M Standard Specification for Blended Hydraulic Cements has been revised to C595/C595M-12 developed by Committee C01.10, ASTM BOS Volume 04.01.
  • C595/C595M Standard Specification for Blended Hydraulic Cements has been editorially changed, available as C595/C595M-12e1 developed by Committee C01.10, ASTM BOS Volume 04.01.
  • C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants has been reapproved, available as C732-06(2012) developed by Committee C24.40, ASTM BOS Volume 04.07.
  • C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering has been reapproved, available as C734-06(2012) developed by Committee C24.40, ASTM BOS Volume 04.07.
  • C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants has been revised to C736-12 developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C791 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide has been revised to C791-12 developed by Committee C26.03, ASTM BOS Volume 12.01.
  • C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear has been revised (with designation change) to C882/C882M-12 developed by Committee C09.25, ASTM BOS Volume 04.02.
  • C919 Standard Practice for Use of Sealants in Acoustical Applications has been revised to C919-12 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation has been revised to C1126-12 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges has been revised to C1129-12 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C1210 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry has been revised to C1210-12 developed by Committee C26.08, ASTM BOS Volume 12.01.
  • C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure has been reapproved, available as C1246-00(2012) developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board has been revised to C1289-12 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS) has been revised to C1481-12 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1487 Standard Guide for Remedying Structural Silicone Glazing has been reapproved, available as C1487-02(2012) developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1528 Standard Guide for Selection of Dimension Stone has been revised to C1528-12a developed by Committee C18.08, ASTM BOS Volume 04.07.
  • C1625 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry has been revised to C1625-12 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C1754/C1754M Standard Test Method for Density and Void Content of Hardened Pervious Concrete is a new standard, now available. C1754/C1754M-12 developed by Committee C09.49, ASTM BOS Volume 04.02.
  • D43/D43M Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing has been reapproved (with editorial change), available as D43/D43M-00(2012)e1 developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing has been reapproved (with editorial change), available as D146/D146M-04(2012)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12?400 ft-lbf/ft3?(600 kN-m/m3)) has been revised to D698-12 developed by Committee D18.03, ASTM BOS Volume 04.08.
  • D907 Standard Terminology of Adhesives has been revised to D907-12 developed by Committee D14.04, ASTM BOS Volume 15.06.
  • D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials has been revised to D1037-12 developed by Committee D07.03, ASTM BOS Volume 04.10.
  • D1327/D1327M Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing has been reapproved (with editorial change), available as D1327/D1327M-04(2012)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) has been revised to D1557-12 developed by Committee D18.03, ASTM BOS Volume 04.08.
  • D1635/D1635M Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading has been revised (with designation change) to Revision with Change in Design developed by Committee D18.15, ASTM BOS Volume 04.08.
  • D2626/D2626M Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing has been reapproved (with editorial change), available as D2626/D2626M-04(2012)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D3793 Standard Test Method for Low-Temperature Coalescence of Latex Paint Films by Porosity Measurement (Withdrawn 2012) has been withdrawn, with no replacement. D3793- developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D3909/D3909M Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules has been reapproved (with editorial change), available as D3909/D3909M-97b(2012)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D4022/D4022M Standard Specification for Coal Tar Roof Cement, Asbestos Containing has been reapproved (with editorial change), available as D4022/D4022M-07(2012)e1 developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D4479/D4479M Standard Specification for Asphalt Roof Coatings - Asbestos-Free has been reapproved (with editorial change), available as D4479/D4479M-07(2012)e1 developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D4586/D4586M Standard Specification for Asphalt Roof Cement, Asbestos-Free has been reapproved (with editorial change), available as D4586/D4586M-07(2012)e1 developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D4601/D4601M Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing has been reapproved (with editorial change), available as D4601/D4601M-04(2012)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D4810 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes has been reapproved, available as D4810-06(2011) developed by Committee D03.07, ASTM BOS Volume 05.06.
  • D4818 Standard Classification for Rubber Compounding Materials – Vulcanization Accelerators has been reapproved, available as D4818-89(2012) developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D4888 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes has been reapproved, available as D4888-06(2011) developed by Committee D03.07, ASTM BOS Volume 05.06.
  • D4924 Standard Classification for Petroleum Waxes for Use in Rubber Compounding has been reapproved, available as D4924-89(2012) developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D4934 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators – Insolubles has been reapproved, available as D4934-02(2012) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D4937 Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography has been reapproved, available as D4937-96(2012) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D4945 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations has been revised to D4945-12 developed by Committee D18.11, ASTM BOS Volume 04.08.
  • D5036 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing (Withdrawn 2012) has been withdrawn, with no replacement. D5036-99(2005) developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D5044 Standard Test Method for Rubber Compounding Materials – Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS) has been reapproved, available as D5044-06(2012) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D5051 Standard Test Method for Rubber Compounding Materials – Benzothiazyl Disulfide (MBTS) – Assay has been reapproved, available as D5051-06(2012) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D5082 Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing (Withdrawn 2012) has been withdrawn, with no replacement. D5082-99(2005) developed by Committee D08.18, ASTM BOS Volume 04.04.
  • D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials has been revised to D5229/D5229M-12 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D5376 Standard Test Method for Rubber Compounding Materials – Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ has been reapproved, available as D5376-06(2012) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D5377 Standard Classification for Rubber Compounding Materials – Ground Coal has been reapproved, available as D5377-93(2012) developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D5433 Standard Performance Specification for Towel Products for Institutional and Household Use has been reinstated, with revision to D5433-12 developed by Committee D13.63, ASTM BOS Volume 07.02.
  • D5461 Standard Test Method for Rubber Compounding Materials – Wet Sieve Analysis of Powdered Rubber Compounding Materials has been reapproved, available as D5461-06(2012) developed by Committee D11.11, ASTM BOS Volume 09.01.
  • D5469/D5469M Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems has been revised to D5469/D5469M-12 developed by Committee D08.06, ASTM BOS Volume 04.04.
  • D5604 Standard Test Methods for Precipitated Silica – Surface Area by Single Point B.E.T. Nitrogen Adsorption has been reapproved, available as D5604-96(2012) developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D5643/D5643M Standard Specification for Coal Tar Roof Cement, Asbestos Free has been reapproved (with editorial change), available as D5643/D5643M-06(2012)e1 developed by Committee D08.05, ASTM BOS Volume 04.04.
  • D5744 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell has been revised to D5744-12 developed by Committee D34.01.04, ASTM BOS Volume 11.04.
  • D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine has been revised to D5967-12 developed by Committee D02.B0.02, ASTM BOS Volume 05.02.
  • D6048 Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers has been reapproved, available as D6048-07(2012) developed by Committee D11.12, ASTM BOS Volume 09.01.
  • D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles has been revised to D6121-12 developed by Committee D02.B0.03, ASTM BOS Volume 05.02.
  • D6225/D6225M Standard Test Method for Granule Cover of Mineral Surfaced Roofing has been reapproved (with editorial change), available as D6225/D6225M-98(2012)e1 developed by Committee D08.04, ASTM BOS Volume 04.04.
  • D6761 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers has been reapproved, available as D6761-07(2012) developed by Committee D32.02, ASTM BOS Volume 05.05.
  • D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine has been revised to D6984-12 developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
  • D7121 Standard Test Method for Rubber Property – Resilience Using Schob Type Rebound Pendulum has been reapproved, available as D7121-05(2012) developed by Committee D11.14, ASTM BOS Volume 09.01.
  • D7371 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method) has been revised to D7371-12 developed by Committee D02.04.0F, ASTM BOS Volume 05.04.
  • D7778 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method is a new standard, now available. D7778-12 developed by Committee D02.94.01, ASTM BOS Volume 05.04.
  • D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method is a new standard, now available. D7797-12 developed by Committee D02.J0.05, ASTM BOS Volume 05.04.
  • D7801 Standard Terminology for Paint Brush Application Tools is a new standard, now available. D7801-12 developed by Committee D01.61, ASTM BOS Volume 06.02.
  • D7802 Standard Terminology for Paint Roller Application Tools is a new standard, now available. D7802-12 developed by Committee D01.61, ASTM BOS Volume 06.02.
  • D7803 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating is a new standard, now available. D7803-12 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • E161 Standard Specification for Precision Electroformed Sieves has been revised to E161-12 developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry has been revised to E248-12 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets has been revised to E382-12 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E454 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) has been revised to E454-12 developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E674 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) has been revised to E674-12 developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E833 Standard Terminology of Building Economics has been revised to E833-12 developed by Committee E06.81, ASTM BOS Volume 04.11.
  • E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry has been revised (with title change) to E841-12a developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E857 Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species has been reapproved, available as E857-05(2012) developed by Committee E47.02, ASTM BOS Volume 11.06.
  • E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry has been revised (with title change) to E945-12 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E997 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods has been revised to E997-12 developed by Committee E06.51, ASTM BOS Volume 04.11.
  • E998 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method has been revised to E998-12 developed by Committee E06.51, ASTM BOS Volume 04.11.
  • E1012 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application has been revised to E1012-12 developed by Committee E28.01, ASTM BOS Volume 03.01.
  • E1014 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels has been revised to E1014-12 developed by Committee E33.09, ASTM BOS Volume 04.06.
  • E1050 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System has been revised to E1050-12 developed by Committee E33.01, ASTM BOS Volume 04.06.
  • E1097 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry has been revised (with title change) to E1097-12 developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E1503 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System has been revised to E1503-12 developed by Committee E33.09, ASTM BOS Volume 04.06.
  • E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference has been reapproved, available as E1592-05(2012) developed by Committee E06.57, ASTM BOS Volume 04.11.
  • E1638 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media has been revised to E1638-12 developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E1660 Standard Classification for Serviceability of an Office Facility for Support for Office Work has been reapproved, available as E1660-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1661 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness has been reapproved, available as E1661-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1662 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment has been reapproved, available as E1662-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1664 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors has been reapproved, available as E1664-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1665 Standard Classification for Serviceability of an Office Facility for Facility Protection has been reapproved, available as E1665-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1666 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions has been reapproved, available as E1666-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1667 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants has been reapproved, available as E1667-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1668 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff has been reapproved, available as E1668-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1669 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding has been reapproved, available as E1669-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1670 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance has been reapproved, available as E1670-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1671 Standard Classification for Serviceability of an Office Facility for Cleanliness has been reapproved, available as E1671-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1679 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility has been reapproved, available as E1679-95(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1692 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants has been reapproved, available as E1692-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1693 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets has been reapproved, available as E1693-95(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1694 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies has been reapproved, available as E1694-95a(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1701 Standard Classification for Serviceability of an Office Facility for Manageability has been reapproved, available as E1701-95(2012) developed by Committee E06.25, ASTM BOS Volume 04.11.
  • E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings has been revised to E1795-12 developed by Committee E06.23, ASTM BOS Volume 04.11.
  • E1825 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems has been reapproved, available as E1825-06(2012) developed by Committee E06.55, ASTM BOS Volume 04.11.
  • E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion has been revised (with title change) to E2050-12a developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E2063 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations has been revised to E2063-12 developed by Committee E52.02, ASTM BOS Volume 14.02.
  • E2093 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization has been revised (with title change) to E2093-12 developed by Committee E01.22, ASTM BOS Volume 03.05.
  • E2121 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings has been revised to E2121-12 developed by Committee E06.41, ASTM BOS Volume 04.12.
  • E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure has been revised to E2242-12 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure has been editorially changed, available as E2242-12e1 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E2320 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions has been reapproved, available as E2320-04(2012) developed by Committee E06.25, ASTM BOS Volume 04.12.
  • E2431 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings has been revised to E2431-12 developed by Committee E06.51, ASTM BOS Volume 04.12.
  • E2461 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs has been revised to E2461-12 developed by Committee E06.51, ASTM BOS Volume 04.12.
  • E2865 Standard Guide for Measurement of Electrophoretic Mobility and Zeta Potential of Nanosized Biological Materials is a new standard, now available. E2865-12 developed by Committee E56.02, ASTM BOS Volume 14.02.
  • F714 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter has been editorially changed, available as F714-12e1 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments has been revised to F899-12 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F1264 Standard Specification and Test Methods for Intramedullary Fixation Devices has been reapproved, available as F1264-03(2012) developed by Committee F04.21, ASTM BOS Volume 13.01.
  • F1334 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners has been revised to F1334-12 developed by Committee F11.25, ASTM BOS Volume 15.08.
  • F1868 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate has been revised to F1868-12 developed by Committee F23.60, ASTM BOS Volume 11.03.
  • F1930 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin has been revised to F1930-12 developed by Committee F23.80, ASTM BOS Volume 11.03.
  • F2012 Standard Consumer Safety Performance Specification for Stationary Activity Centers has been revised to F2012-12 developed by Committee F15.17, ASTM BOS Volume 15.11.
  • F2194 Standard Consumer Safety Specification for Bassinets and Cradles has been revised to F2194-12 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F2322 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities has been reinstated as F2322-12 developed by Committee F33.02, ASTM BOS Volume 15.08.
  • F2473 Standard Test Method for Performance of Water-Bath Rethermalizers has been revised to F2473-12 developed by Committee F26.06, ASTM BOS Volume 15.12.
  • F2479 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing has been revised to F2479-12 developed by Committee F08.63, ASTM BOS Volume 15.07.

Published in international.