ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service has been revised to A106/A106M-11 developed by Committee A01.09, ASTM BOS Volume 01.01.
  • A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications has been revised to A193/A193M-11a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both has been revised to A194/A194M-11 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service has been revised to A217/A217M-11 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service has been revised to A234/A234M-11a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications has been revised to A240/A240M-11b developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service has been revised to A320/A320M-11a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A327/A327M Standard Test Methods for Impact Testing of Cast Irons has been revised (with designation change) to A327/A327M-11 developed by Committee A04.21, ASTM BOS Volume 01.02.
  • A327M Standard Test Methods for Impact Testing of Cast Irons (Metric) (Withdrawn 2011) has been withdrawn and replaced by A327/A327M-11 developed by Committee A04.21, ASTM BOS Volume 01.02.
  • A341/A341M Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods has been reapproved (with editorial change), available as A341/A341M-00(2011)e1 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A348/A348M Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame has been reapproved, available as A348/A348M-05(2011) developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners has been revised to A354-11 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A356/A356M Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines has been revised to A356/A356M-11 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products has been revised to A370-11a developed by Committee A01.13, ASTM BOS Volume 01.03.
  • A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service has been revised to A426/A426M-11a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A437/A437M Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service has been revised to A437/A437M-11 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A447/A447M Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service has been revised to A447/A447M-11 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A453/A453M Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels has been revised to A453/A453M-11 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip has been revised to A480/A480M-11b developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength has been revised to A490-11 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) has been revised to A490M-11 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel has been revised (with designation change) to A510/A510M-11 developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A540/A540M Standard Specification for Alloy-Steel Bolting for Special Applications has been revised to A540/A540M-11 developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A660/A660M Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service has been revised (with designation change) to A660/A660M-11 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail has been editorially changed, available as A741-11e1 developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products has been revised to A751-11 developed by Committee A01.13, ASTM BOS Volume 01.03.
  • A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe has been revised to A790/A790M-11 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A829/A829M Standard Specification for Alloy Structural Steel Plates has been revised to A829/A829M-11 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A894/A894M Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials has been reapproved (with editorial change), available as A894/A894M-00(2011)e1 developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A928/A928M Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal has been revised to A928/A928M-11 developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A957/A957M-11a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range has been revised to A962/A962M-11a developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) has been revised to A975-11 developed by Committee A05.12, ASTM BOS Volume 01.06.
  • A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts has been revised to A985/A985M-11a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process has been revised to A1039/A1039M-11 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars has been editorially changed, available as A1055/A1055M-10e1 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1072/A1072M Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products is a new standard, now available. A1072/A1072M-11 developed by Committee A05.13, ASTM BOS Volume 01.06.
  • B26/B26M Standard Specification for Aluminum-Alloy Sand Castings has been revised to B26/B26M-11 developed by Committee B07.01, ASTM BOS Volume 02.02.
  • B75/B75M Standard Specification for Seamless Copper Tube has been revised (with designation change) to B75/B75M-11 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings has been revised to B108/B108M-11 developed by Committee B07.01, ASTM BOS Volume 02.02.
  • B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel has been revised (with title change) to B213-11 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors has been revised to B228-11a developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B243 Standard Terminology of Powder Metallurgy has been revised to B243-11 developed by Committee B09.01, ASTM BOS Volume 02.05.
  • B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating has been revised to B253-11 developed by Committee B08.02, ASTM BOS Volume 02.05.
  • B327 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys has been editorially changed, available as B327-09ae1 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar has been revised to B425-11 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium has been editorially changed, available as B456-11e1 developed by Committee B08.08.03, ASTM BOS Volume 02.05.
  • B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications (Withdrawn 2012) has been withdrawn, with no replacement. B483/B483M-03 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B488 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses has been revised to B488-11 developed by Committee B08.08.02, ASTM BOS Volume 02.05.
  • B564 Standard Specification for Nickel Alloy Forgings has been revised to B564-11 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B618/B618M Standard Specification for Aluminum-Alloy Investment Castings has been revised to B618/B618M-11 developed by Committee B07.01, ASTM BOS Volume 02.02.
  • B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe has been editorially changed, available as B619-10e1 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube has been editorially changed, available as B626-10e1 developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B657 Guide for Metallographic Identification of Microstructure in Cemented Carbides has been revised to B657-11 developed by Committee B09.06, ASTM BOS Volume 02.05.
  • B769 Standard Test Method for Shear Testing of Aluminum Alloys has been revised to B769-11 developed by Committee B07.05, ASTM BOS Volume 02.02.
  • B790/B790M Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits has been revised to B790/B790M-11 developed by Committee B07.08, ASTM BOS Volume 02.02.
  • B831 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products has been revised to B831-11 developed by Committee B07.05, ASTM BOS Volume 02.02.
  • B855 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel has been revised to B855-11 developed by Committee B09.02, ASTM BOS Volume 02.05.
  • B951 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought has been revised to B951-11 developed by Committee B07.04, ASTM BOS Volume 02.02.
  • C139 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes has been revised to C139-11 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials has been revised to C273/C273M-11 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C311 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete has been revised to C311-11b developed by Committee C09.24, ASTM BOS Volume 04.02.
  • C361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe has been revised to C361-11 developed by Committee C13.04, ASTM BOS Volume 04.05.
  • C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores has been revised to C365/C365M-11a developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C384 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method has been reapproved, available as C384-04(2011) developed by Committee E33.01, ASTM BOS Volume 04.06.
  • C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete has been revised to C387/C387M-11a developed by Committee C09.43, ASTM BOS Volume 04.02.
  • C410 Standard Specification for Industrial Floor Brick has been revised to C410-11 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C441/C441M Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction has been revised (with designation change) to C441/C441M-11 developed by Committee C09.26, ASTM BOS Volume 04.02.
  • C478 Standard Specification for Precast Reinforced Concrete Manhole Sections has been revised to C478-11 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric) has been revised to C478M-11 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C481 Standard Test Method for Laboratory Aging of Sandwich Constructions has been reapproved, available as C481-99(2011) developed by Committee D30.09, ASTM BOS Volume 15.03.
  • C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form has been revised to C534/C534M-11 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C547 Standard Specification for Mineral Fiber Pipe Insulation has been editorially changed, available as C547-11e1 developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation has been revised to C578-11b developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation has been revised to C610-11 developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C634 Standard Terminology Relating to Building and Environmental Acoustics has been revised to C634-11 developed by Committee E33.07, ASTM BOS Volume 04.06.
  • C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing has been revised to C665-11 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C672/C672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2012) has been withdrawn, with no replacement. C672/C672M-03 developed by Committee C09.67, ASTM BOS Volume 04.02.
  • C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants has been reapproved, available as C765-97(2011) developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C791 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide has been revised to C791-11 developed by Committee C26.03, ASTM BOS Volume 12.01.
  • C822 Standard Terminology Relating to Concrete Pipe and Related Products has been revised to C822-11 developed by Committee C13.10, ASTM BOS Volume 04.05.
  • C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions has been editorially changed, available as C871-11e1 developed by Committee C16.31, ASTM BOS Volume 04.06.
  • C902 Standard Specification for Pedestrian and Light Traffic Paving Brick has been revised to C902-11 developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C908 Standard Test Method for Yield Strength of Preformed Tape Sealants has been reapproved, available as C908-00(2011) developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C910 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants has been reapproved, available as C910-06(2011) developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units has been revised to C936/C936M-11 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C961 Standard Test Method for Lap Shear Strength of Sealants has been reapproved, available as C961-06(2011) developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation has been reapproved (with editorial change), available as C1015-06(2011)e1 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete has been revised to C1064/C1064M-11 developed by Committee C09.60, ASTM BOS Volume 04.02.
  • C1072 Standard Test Methods for Measurement of Masonry Flexural Bond Strength has been revised to C1072-11 developed by Committee C15.04, ASTM BOS Volume 04.05.
  • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation has been revised to C1077-11c developed by Committee C09.98, ASTM BOS Volume 04.02.
  • C1140/C1140M Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels has been revised (with designation change) to C1140/C1140M-11 developed by Committee C09.46, ASTM BOS Volume 04.02.
  • C1158 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction has been withdrawn and replaced by C1744-10 developed by Committee C16.21, ASTM BOS Volume 04.06.
  • C1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill has been revised to C1244-11 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C1244M Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric) has been revised to C1244M-11 developed by Committee C13.06, ASTM BOS Volume 04.05.
  • C1265 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications has been reapproved, available as C1265-94(2011) developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants has been reapproved, available as C1266-02(2011) developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C1272 Standard Specification for Heavy Vehicular Paving Brick has been revised to C1272-11a developed by Committee C15.02, ASTM BOS Volume 04.05.
  • C1280 Standard Specification for Application of Gypsum Sheathing has been revised to C1280-11 developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board has been revised to C1289-11a developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials has been reapproved, available as C1294-07(2011) developed by Committee C24.20, ASTM BOS Volume 04.07.
  • C1299 Standard Guide for Use in Selection of Liquid-Applied Sealants (Withdrawn 2012) has been withdrawn, with no replacement. C1299-03 developed by Committee C24.10, ASTM BOS Volume 04.07.
  • C1314 Standard Test Method for Compressive Strength of Masonry Prisms has been revised to C1314-11a developed by Committee C15.04, ASTM BOS Volume 04.05.
  • C1367 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures has been reapproved, available as C1367-06(2012) developed by Committee C24.30, ASTM BOS Volume 04.07.
  • C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions has been revised (with designation change) to C1373/C1373M-11 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C1491 Standard Specification for Concrete Roof Pavers has been revised to C1491-11 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation has been revised to C1594-11 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces has been revised to C1601-11 developed by Committee C15.04, ASTM BOS Volume 04.05.
  • C1623 Standard Specification for Manufactured Concrete Masonry Lintels has been revised to C1623-11 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C1645/C1645M Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units has been revised to C1645/C1645M-11 developed by Committee C15.03, ASTM BOS Volume 04.05.
  • C1691 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units has been revised to C1691-11 developed by Committee C15.10, ASTM BOS Volume 04.05.
  • C1692 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry has been revised to C1692-11 developed by Committee C15.10, ASTM BOS Volume 04.05.
  • C1728 Standard Specification for Flexible Aerogel Insulation is a new standard, now available. C1728-12 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1752 Standard Guide for Measuring Physical and Rheological Properties of Radioactive Solutions, Slurries, and Sludges is a new standard, now available. C1752-11 developed by Committee C26.13, ASTM BOS Volume 12.01.
  • C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete is a new standard, now available. C1758/C1758M-11 developed by Committee C09.47, ASTM BOS Volume 04.02.
  • D76/D76M Standard Specification for Tensile Testing Machines for Textiles has been revised (with designation change) to D76/D76M-11 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester has been revised to D92-11 developed by Committee D02.08, ASTM BOS Volume 05.01.
  • D304 Standard Specification for n-Butyl Alcohol (Butanol) has been revised to D304-11 developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D409/D409M Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method has been revised to D409/D409M-11a developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D420 Standard Guide to Site Characterization for Engineering Design and Construction Purposes (Withdrawn 2012) has been withdrawn, with no replacement. D420-98(2003) developed by Committee D18.01, ASTM BOS Volume 04.08.
  • D490 Standard Specification for Road Tar has been reapproved, available as D490-92(2011) developed by Committee D04.43, ASTM BOS Volume 04.03.
  • D633 Standard Volume Correction Table for Road Tar has been revised to D633-11 developed by Committee D04.43, ASTM BOS Volume 04.03.
  • D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids has been revised to D653-11 developed by Committee D18.93, ASTM BOS Volume 04.08.
  • D669 Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials (Withdrawn 2012) has been withdrawn, with no replacement. D669-98(2003) developed by Committee D09.07, ASTM BOS Volume 10.01.
  • D686 Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper (Withdrawn 2011) has been withdrawn, with no replacement. D686-93(2007) developed by Committee D06.92, ASTM BOS Volume 15.09.
  • D740 Standard Specification for Methyl Ethyl Ketone has been revised to D740-11 developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds has been revised to D788-11 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures has been revised to D806-11 developed by Committee D18.15, ASTM BOS Volume 04.08.
  • D843 Standard Specification for Nitration Grade Xylene has been reapproved (with editorial change), available as D843-06(2011)e1 developed by Committee D16.01, ASTM BOS Volume 06.04.
  • D907 Standard Terminology of Adhesives has been revised to D907-11a developed by Committee D14.04, ASTM BOS Volume 15.06.
  • D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics has been editorially changed, available as D1003-11e1 developed by Committee D20.40, ASTM BOS Volume 08.01.
  • D1038 Standard Terminology Relating to Veneer and Plywood has been revised to D1038-11 developed by Committee D07.03, ASTM BOS Volume 04.10.
  • D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures has been revised to D1073-11 developed by Committee D04.50, ASTM BOS Volume 04.03.
  • D1078 Standard Test Method for Distillation Range of Volatile Organic Liquids has been revised to D1078-11 developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D1244 Standard Practice for Designation of Yarn Construction has been reapproved, available as D1244-98(2011) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D1338 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength has been reapproved, available as D1338-99(2011) developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D1461 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures has been revised to D1461-11 developed by Committee D04.25, ASTM BOS Volume 04.03.
  • D1566 Standard Terminology Relating to Rubber has been revised to D1566-11 developed by Committee D11.08, ASTM BOS Volume 09.01.
  • D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils has been revised to D1586-11 developed by Committee D18.02, ASTM BOS Volume 04.08.
  • D1652 Standard Test Method for Epoxy Content of Epoxy Resins has been revised to D1652-11 developed by Committee D01.33, ASTM BOS Volume 06.03.
  • D1670/D1670M Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials has been revised to D1670/D1670M-11 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D1825 Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing (Withdrawn 2012) has been withdrawn, with no replacement. D1825-03 developed by Committee D09.07, ASTM BOS Volume 10.01.
  • D1946 Standard Practice for Analysis of Reformed Gas by Gas Chromatography has been reapproved, available as D1946-90(2011) developed by Committee D03.07, ASTM BOS Volume 05.06.
  • D2000 Standard Classification System for Rubber Products in Automotive Applications has been revised to D2000-12 developed by Committee D11.30, ASTM BOS Volume 09.02.
  • D2414 Standard Test Method for Carbon Black—Oil Absorption Number (OAN) has been revised to D2414-11 developed by Committee D24.11, ASTM BOS Volume 09.01.
  • D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings has been revised to D2513-11c developed by Committee F17.60, ASTM BOS Volume 08.04.
  • D2556 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties has been revised to D2556-11 developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D2612 Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests) has been reapproved, available as D2612-99(2011) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel has been editorially changed, available as D2699-11e1 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel has been editorially changed, available as D2700-11e1 developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils has been revised to D2711-11 developed by Committee D02.L0.01, ASTM BOS Volume 05.01.
  • D2726 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures has been revised to D2726-11 developed by Committee D04.21, ASTM BOS Volume 04.03.
  • D2899 Standard Practice for Establishing Allowable Stresses for Round Timber Piles has been revised to D2899-11 developed by Committee D07.04, ASTM BOS Volume 04.10.
  • D2930 Standard Test Method for Maleic Acid in Maleic Anhydride by Potentiometric Titration (Withdrawn 2012) has been withdrawn, with no replacement. D2930-03 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D2945 Standard Test Method for Gas Content of Insulating Oils (Withdrawn 2012) has been withdrawn, with no replacement. D2945-90(2003)e2 developed by Committee D27.03, ASTM BOS Volume 10.03.
  • D2950/D2950M Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods has been revised to D2950/D2950M-11 developed by Committee D04.21, ASTM BOS Volume 04.03.
  • D2961 Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize has been revised to D2961-11 developed by Committee D05.21, ASTM BOS Volume 05.06.
  • D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions has been revised (with designation change) to D3080/D3080M-11 developed by Committee D18.05, ASTM BOS Volume 04.08.
  • D3130 Standard Specification for n-Propyl Acetate (96 % Grade) has been revised to D3130-11 developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D3164M Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Withdrawn 2012) has been withdrawn, with no replacement. D3164M-03 developed by Committee D14.40, ASTM BOS Volume 15.06.
  • D3203/D3203M Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures has been revised (with designation change) to D3203/D3203M-11 developed by Committee D04.21, ASTM BOS Volume 04.03.
  • D3366 Standard Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) (Withdrawn 2012) has been withdrawn, with no replacement. D3366-95(2003)e1 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D3489 Standard Test Methods for Microcellular Urethane Materials has been revised to D3489-11 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D3504 Standard Specification for Maleic Anhydride (Withdrawn 2012) has been withdrawn, with no replacement. D3504-96(2003)e1 developed by Committee D16.02, ASTM BOS Volume 06.04.
  • D3527 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease has been revised to D3527-11 developed by Committee D02.G0.05, ASTM BOS Volume 05.01.
  • D3549/D3549M Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens has been revised (with designation change) to D3549/D3549M-11 developed by Committee D04.21, ASTM BOS Volume 04.03.
  • D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams has been revised to D3574-11 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials has been revised to D3666-11 developed by Committee D04.95, ASTM BOS Volume 04.03.
  • D3744/D3744M Standard Test Method for Aggregate Durability Index has been revised to D3744/D3744M-11a developed by Committee D04.51, ASTM BOS Volume 04.03.
  • D3768 Standard Test Method for Microcellular Urethanes—Flexural Recovery has been revised to D3768-11 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts has been revised to D3791/D3791M-11 developed by Committee D08.03, ASTM BOS Volume 04.04.
  • D3856 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water has been revised (with title change) to D3856-11 developed by Committee D19.02, ASTM BOS Volume 11.01.
  • D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus has been revised to D3999-11 developed by Committee D18.09, ASTM BOS Volume 04.08.
  • D4018 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows has been revised to D4018-11 developed by Committee D30.03, ASTM BOS Volume 15.03.
  • D4052 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter has been revised to D4052-11 developed by Committee D02.04.0D, ASTM BOS Volume 05.02.
  • D4071 Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems has been reapproved, available as D4071-84(2011) developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D4175 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants has been editorially changed, available as D4175-09ae2 developed by Committee D02.95, ASTM BOS Volume 05.02.
  • D4179 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers has been revised (with title change) to D4179-11 developed by Committee D32.02, ASTM BOS Volume 05.05.
  • D4360 Standard Specification for Methyl n-Amyl Ketone has been revised to D4360-11 developed by Committee D01.35, ASTM BOS Volume 06.04.
  • D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel has been revised to D4417-11 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D4439 Standard Terminology for Geosynthetics has been revised to D4439-11 developed by Committee D35.93, ASTM BOS Volume 04.13.
  • D4468 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry has been reapproved, available as D4468-85(2011) developed by Committee D03.05, ASTM BOS Volume 05.06.
  • D4469 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture has been revised to D4469-11 developed by Committee D04.51, ASTM BOS Volume 04.03.
  • D4485 Standard Specification for Performance of Active API Service Category Engine Oils has been revised to D4485-11b developed by Committee D02.B0, ASTM BOS Volume 05.02.
  • D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat has been revised to D4511-11 developed by Committee D18.04, ASTM BOS Volume 04.08.
  • D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials has been revised to D4561-11 developed by Committee D04.95, ASTM BOS Volume 04.03.
  • D4566 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable has been editorially changed, available as D4566-08e1 developed by Committee D09.18, ASTM BOS Volume 10.02.
  • D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method has been revised to D4595-11 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D4617 Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012) has been withdrawn, with no replacement. D4617-03 developed by Committee D20.16, ASTM BOS Volume 08.02.
  • D4678 Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials has been revised to D4678-11 developed by Committee D11.20, ASTM BOS Volume 09.01.
  • D4745 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials has been revised to D4745-11a developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D4754 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell has been revised to D4754-11 developed by Committee D20.70, ASTM BOS Volume 08.02.
  • D4800 Standard Guide for Classifying and Specifying Adhesives has been reapproved, available as D4800-94(2011) developed by Committee D14.60, ASTM BOS Volume 15.06.
  • D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics has been revised to D4812-11 developed by Committee D20.10, ASTM BOS Volume 08.02.
  • D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel has been revised to D4814-11a developed by Committee D02.A0.01, ASTM BOS Volume 05.02.
  • D4829 Standard Test Method for Expansion Index of Soils has been revised to D4829-11 developed by Committee D18.05, ASTM BOS Volume 04.08.
  • D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester has been revised to D4944-11 developed by Committee D18.08, ASTM BOS Volume 04.08.
  • D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials has been revised to D5025-11 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists has been revised to D5055-11a developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5 and –35°C Using Cold-Cranking Simulator has been editorially changed, available as D5293-10e1 developed by Committee D02.07, ASTM BOS Volume 05.02.
  • D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil has been revised to D5311-11 developed by Committee D18.09, ASTM BOS Volume 04.08.
  • D5337 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps has been revised to D5337-11 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D5344 Standard Test Method for Extension Force of Partially Oriented Yarn has been reapproved, available as D5344-99(2011) developed by Committee D13.58, ASTM BOS Volume 07.02.
  • D5445 Standard Practice for Pictorial Markings for Handling of Goods has been revised to D5445-11a developed by Committee D10.11, ASTM BOS Volume 15.10.
  • D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders has been revised to D5448/D5448M-11 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders has been revised to D5449/D5449M-11 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders has been revised to D5450/D5450M-11 developed by Committee D30.04, ASTM BOS Volume 15.03.
  • D5456 Standard Specification for Evaluation of Structural Composite Lumber Products has been revised to D5456-11a developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D5477 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) has been reinstated as D5477-11 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression has been revised to D5520-11 developed by Committee D18.19, ASTM BOS Volume 04.08.
  • D5626 Standard Test Methods for U.S. Postal Service Optical Measurements for Small Areas (Withdrawn 2011) has been withdrawn, with no replacement. D5626-94(2006) developed by Committee D06.92, ASTM BOS Volume 15.09.
  • D5711 Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012) has been withdrawn, with no replacement. D5711-03 developed by Committee D04.51, ASTM BOS Volume 04.03.
  • D5757 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets has been revised to D5757-11 developed by Committee D32.02, ASTM BOS Volume 05.05.
  • D5758 Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction has been reapproved (with editorial change), available as D5758-01(2011)e1 developed by Committee D32.05, ASTM BOS Volume 05.05.
  • D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration has been reapproved, available as D5776-07(2012) developed by Committee D16.04, ASTM BOS Volume 06.04.
  • D5845 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy has been reapproved, available as D5845-01(2011) developed by Committee D02.04.0F, ASTM BOS Volume 05.02.
  • D5865 Standard Test Method for Gross Calorific Value of Coal and Coke has been revised to D5865-11a developed by Committee D05.21, ASTM BOS Volume 05.06.
  • D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners has been revised to D5890-11 developed by Committee D35.04, ASTM BOS Volume 04.13.
  • D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens has been revised to D5947-11 developed by Committee D20.10, ASTM BOS Volume 08.03.
  • D6039/D6039M Standard Specification for Open and Covered Wood Crates has been revised to D6039/D6039-11 developed by Committee D10.12, ASTM BOS Volume 15.10.
  • D6041 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings has been reinstated as D6041-11 developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D6063 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel has been revised to D6063-11 developed by Committee D34.01.02, ASTM BOS Volume 11.04.
  • D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential has been revised to D6066-11 developed by Committee D18.02, ASTM BOS Volume 04.09.
  • D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites has been reapproved, available as D6115-97(2011) developed by Committee D30.06, ASTM BOS Volume 15.03.
  • D6130 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy has been revised to D6130-11 developed by Committee D15.04, ASTM BOS Volume 15.05.
  • D6181 Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin (Withdrawn 2012) has been withdrawn, with no replacement. D6181-03 developed by Committee D27.07, ASTM BOS Volume 10.03.
  • D6197 Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests has been reapproved, available as D6197-99(2011) developed by Committee D13.58, ASTM BOS Volume 07.02.
  • D6324 Standard Test Methods for Male Condoms Made from Polyurethane has been revised to D6324-11 developed by Committee D11.40, ASTM BOS Volume 09.02.
  • D6358 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods has been revised (with title change) to D6358-11 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration has been revised to D6391-11 developed by Committee D18.04, ASTM BOS Volume 04.09.
  • D6394 Standard Specification for Sulfone Plastics (SP) has been revised to D6394-11 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D6413 Standard Test Method for Flame Resistance of Textiles (Vertical Test) has been revised to D6413-11a developed by Committee D13.52, ASTM BOS Volume 07.02.
  • D6413/D641M Standard Test Method for Flame Resistance of Textiles (Vertical Test) has been revised (with designation change) to D6413/D6413M-11ae1 developed by Committee D13.52, ASTM BOS Volume 07.02.
  • D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion has been revised to D6459-11 developed by Committee D18.25, ASTM BOS Volume 04.09.
  • D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations has been revised to D6598-11 developed by Committee D18.23, ASTM BOS Volume 04.09.
  • D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel has been revised to D6615-11a developed by Committee D02.J0.01, ASTM BOS Volume 05.03.
  • D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks) has been revised to D6638-11 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry has been revised to D6728-11 developed by Committee D02.03, ASTM BOS Volume 05.03.
  • D6789 Standard Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus (Withdrawn 2011) has been withdrawn, with no replacement. D6789-02(2007) developed by Committee D06.92, ASTM BOS Volume 15.09.
  • D6809 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials has been reapproved, available as D6809-02(2012) developed by Committee D16.06, ASTM BOS Volume 06.04.
  • D6819 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus (Withdrawn 2011) has been withdrawn, with no replacement. D6819-02(2007) developed by Committee D06.92, ASTM BOS Volume 15.09.
  • D6831 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance has been revised to D6831-11 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D6833 Standard Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus (Withdrawn 2011) has been withdrawn, with no replacement. D6833-02(2007) developed by Committee D06.92, ASTM BOS Volume 15.09.
  • D6862 Standard Test Method for 90 Degree Peel Resistance of Adhesives has been revised to D6862-11 developed by Committee D14.10, ASTM BOS Volume 15.06.
  • D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber has been revised to D6890-11b developed by Committee D02.01, ASTM BOS Volume 05.05.
  • D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity) has been revised to D7042-11a developed by Committee D02.07, ASTM BOS Volume 05.04.
  • D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions has been revised to D7100-11 developed by Committee D18.04, ASTM BOS Volume 04.09.
  • D7155 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils has been revised to D7155-11 developed by Committee D02.C0, ASTM BOS Volume 05.04.
  • D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence has been revised to D7183-12 developed by Committee D16.04, ASTM BOS Volume 06.04.
  • D7205/D7205M Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars has been reapproved, available as D7205/D7205M-06(2011) developed by Committee D30.05, ASTM BOS Volume 15.03.
  • D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges has been revised to D7243-11 developed by Committee D18.04, ASTM BOS Volume 04.09.
  • D7278 Standard Guide for Prediction of Analyzer Sample System Lag Times has been revised to D7278-11 developed by Committee D02.25, ASTM BOS Volume 05.04.
  • D7290 Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications has been reapproved, available as D7290-06(2011) developed by Committee D30.05, ASTM BOS Volume 15.03.
  • D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain has been revised to D7300-11 developed by Committee D18.19, ASTM BOS Volume 04.09.
  • D7301 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose has been revised to D7301-11 developed by Committee D02.F0, ASTM BOS Volume 05.05.
  • D7310 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors has been revised to D7310-11 developed by Committee D20.19, ASTM BOS Volume 08.03.
  • D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine has been revised to D7320-11a developed by Committee D02.B0.01, ASTM BOS Volume 05.04.
  • D7363 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode has been revised to D7363-11 developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7398 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615°C by Gas Chromatography has been revised to D7398-11 developed by Committee D02.04.0H, ASTM BOS Volume 05.04.
  • D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine has been revised to D7422-11 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7436 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology is a new standard, now available. D7436-11 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D7468 Standard Test Method for Cummins ISM Test has been revised to D7468-11 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7478/D7478M Standard Specification for Heavy Duty Sheathed Wood Crates has been revised to D7478/D7478M-11 developed by Committee D10.12, ASTM BOS Volume 15.10.
  • D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine has been revised to D7484-11 developed by Committee D02.B0, ASTM BOS Volume 05.04.
  • D7547 Standard Specification for Unleaded Aviation Gasol/sine has been revised to D7547-11 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7582 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis has been editorially changed, available as D7582-10e1 developed by Committee D05.21, ASTM BOS Volume 05.06.
  • D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine has been revised to D7589-11a developed by Committee D02.B0.10, ASTM BOS Volume 05.04.
  • D7605 Standard Test Method for Thermoplastic Elastomers - Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers has been revised to D7605-11 developed by Committee D11.12, ASTM BOS Volume 09.01.
  • D7655/D7655M Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems is a new standard, now available. D7655/D7655M-12 developed by Committee D08.20, ASTM BOS Volume 04.04.
  • D7672 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies has been revised to D7672-11a developed by Committee D07.05, ASTM BOS Volume 04.10.
  • D7679 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils has been revised to D7679-11 developed by Committee D24.66, ASTM BOS Volume 09.01.
  • D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method has been revised to D7698-11a developed by Committee D18.08, ASTM BOS Volume 04.09.
  • D7715 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines is a new standard, now available. D7715-11 developed by Committee D15.93, ASTM BOS Volume 15.05.
  • D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures is a new standard, now available. D7735-11 developed by Committee D01.44, ASTM BOS Volume 06.02.
  • D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis has been editorially changed, available as D7751-11e1 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7752 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids is a new standard, now available. D7752-11 developed by Committee D02.N0.09, ASTM BOS Volume 05.04.
  • D7755 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine is a new standard, now available. D7755-11 developed by Committee D02.L0, ASTM BOS Volume 05.04.
  • D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection is a new standard, now available. D7756-11 developed by Committee D02.H0, ASTM BOS Volume 05.04.
  • D7758 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations is a new standard, now available. D7758-11 developed by Committee D18.21, ASTM BOS Volume 04.09.
  • D7766/D7766M Standard Practice for Damage Resistance Testing of Sandwich Constructions is a new standard, now available. D7766/D7766M-11 developed by Committee D30.09, ASTM BOS Volume 15.03.
  • D7767 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them is a new standard, now available. D7767-11 developed by Committee D01.21, ASTM BOS Volume 06.01.
  • D7771 Standard Test Method for Determination of Benzo-?-Pyrene (BaP) Content in Carbon Black is a new standard, now available. D7771-11 developed by Committee D24.66, ASTM BOS Volume 09.01.
  • D7772 Standard Test Method for Carbon Black Extractables - Absorbance of Cyclohexane Extract is a new standard, now available. D7772-11 developed by Committee D24.66, ASTM BOS Volume 09.01.
  • D7774 Standard Test Method for Flexural Fatigue Properties of Plastics is a new standard, now available. D7774-11 developed by Committee D20.10, ASTM BOS Volume 08.03.
  • E81 Standard Test Method for Preparing Quantitative Pole Figures has been reapproved, available as E81-96(2011) developed by Committee E04.11, ASTM BOS Volume 03.01.
  • E84 Standard Test Method for Surface Burning Characteristics of Building Materials has been revised to E84-11c developed by Committee E05.22, ASTM BOS Volume 04.07.
  • E95 Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation has been reapproved, available as E95-68(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E144 Standard Practice for Safe Use of Oxygen Combustion Bombs has been reapproved, available as E144-94(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E145 Standard Specification for Gravity-Convection and Forced-Ventilation Ovens has been reapproved, available as E145-94(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E147 Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method has been reapproved, available as E147-61(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E171/E171M Standard Practice for Conditioning and Testing Flexible Barrier Packaging has been revised (with designation change) to E171/E171M-11 developed by Committee F02.50, ASTM BOS Volume 15.10.
  • E236 Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups has been reapproved, available as E236-66(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E253 Standard Terminology Relating to Sensory Evaluation of Materials and Products has been revised to E253-11a developed by Committee E18.01, ASTM BOS Volume 15.08.
  • E260 Standard Practice for Packed Column Gas Chromatography has been reapproved, available as E260-96(2011) developed by Committee E13.19, ASTM BOS Volume 03.06.
  • E336 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings has been revised to E336-11 developed by Committee E33.03, ASTM BOS Volume 04.06.
  • E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry has been revised to E342-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E385 Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique has been revised to E385-11 developed by Committee E10.05, ASTM BOS Volume 12.02.
  • E386 Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy has been reapproved, available as E386-90(2011) developed by Committee E13.15, ASTM BOS Volume 03.06.
  • E438 Standard Specification for Glasses in Laboratory Apparatus has been reapproved, available as E438-92(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E454 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) has been revised to E454-11 developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E467 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System has been editorially changed, available as E467-08e1 developed by Committee E08.03, ASTM BOS Volume 03.01.
  • E514/E514M Standard Test Method for Water Penetration and Leakage Through Masonry has been revised to E514/E514M-11 developed by Committee C15.04, ASTM BOS Volume 04.05.
  • E561 Standard Test Method for K-R Curve Determination has been editorially changed, available as E561-10e1 developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions has been revised to E580/E580M-11b developed by Committee E33.04, ASTM BOS Volume 04.06.
  • E594 Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography has been reapproved, available as E594-96(2011) developed by Committee E13.19, ASTM BOS Volume 03.06.
  • E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates has been editorially changed, available as E647-11e1 developed by Committee E08.06, ASTM BOS Volume 03.01.
  • E660 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine has been reapproved, available as E660-90(2011) developed by Committee E17.23, ASTM BOS Volume 04.03.
  • E672 Standard Specification for Disposable Glass Micropipets has been reapproved, available as E672-87(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E673 Standard Terminology Relating to Surface Analysis (Withdrawn 2012) has been withdrawn, with no replacement. E673-03 developed by Committee E42.02, ASTM BOS Volume 03.06.
  • E674 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) has been revised to E674-11 developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E688 Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing has been reapproved, available as E688-94(2011) developed by Committee D34.03, ASTM BOS Volume 11.04.
  • E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method has been revised to E691-11 developed by Committee E11.20, ASTM BOS Volume 14.02.
  • E697 Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography has been reapproved, available as E697-96(2011) developed by Committee E13.19, ASTM BOS Volume 03.06.
  • E715 Standard Specification for Gravity-Convection and Forced-Circulation Water Baths has been reapproved, available as E715-80(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E721 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics has been revised to E721-11 developed by Committee E10.07, ASTM BOS Volume 12.02.
  • E732 Standard Specification for Disposable Pasteur-Type Pipet has been reapproved, available as E732-80(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E785 Standard Specification for Crucibles, Ignition, Laboratory, Metal has been reapproved, available as E785-81(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E786 Standard Specification for Dishes, Evaporating, Platinum has been reapproved, available as E786-81(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E787 Standard Specification for Disposable Glass Micro Blood Collection Pipets has been reapproved, available as E787-81(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry has been revised to E878-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1044 Standard Specification for Glass Serological Pipets (General Purpose and Kahn) has been reapproved, available as E1044-96(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E1096 Standard Specification for Laboratory Glass Separatory Funnels has been reapproved, available as E1096-86(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E1110 Standard Classification for Determination of Articulation Class has been reapproved, available as E1110-06(2011) developed by Committee E33.02, ASTM BOS Volume 04.06.
  • E1151 Standard Practice for Ion Chromatography Terms and Relationships has been reapproved, available as E1151-93(2011) developed by Committee E13.19, ASTM BOS Volume 03.06.
  • E1157 Standard Specification for Sampling and Testing of Reusable Laboratory Glassware has been reapproved, available as E1157-87(2011) developed by Committee E41.01, ASTM BOS Volume 14.04.
  • E1162 Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS) has been revised to E1162-11 developed by Committee E42.06, ASTM BOS Volume 03.06.
  • E1179 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems has been revised to E1179-11 developed by Committee E33.02, ASTM BOS Volume 04.06.
  • E1247 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry (Withdrawn 2012) has been withdrawn, with no replacement. E1247-03 developed by Committee E12.05, ASTM BOS Volume 06.01.
  • E1292 Standard Specification for Gravity Convection and Forced Ventilation Incubators has been reapproved, available as E1292-94(2011) developed by Committee E41.06, ASTM BOS Volume 14.04.
  • E1306 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition has been revised (with title change) to E1306-11 developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E1309 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases has been reapproved, available as E1309-00(2011) developed by Committee D30.01, ASTM BOS Volume 15.03.
  • E1348 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry has been revised to E1348-11 developed by Committee E12.02, ASTM BOS Volume 06.01.
  • E1369 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems has been revised to E1369-11 developed by Committee E06.81, ASTM BOS Volume 04.11.
  • E1374 Standard Guide for Open Office Acoustics and Applicable ASTM Standards has been reapproved, available as E1374-06(2011) developed by Committee E33.02, ASTM BOS Volume 04.06.
  • E1414/E1414M Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum has been revised to E1414/E1414M-11a developed by Committee E33.03, ASTM BOS Volume 04.06.
  • E1438 Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS has been revised to E1438-11 developed by Committee E42.06, ASTM BOS Volume 03.06.
  • E1457 Standard Test Method for Measurement of Creep Crack Growth Times in Metals has been editorially changed, available as E1457-07e4 developed by Committee E08.06, ASTM BOS Volume 03.01.
  • E1504 Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS) has been revised to E1504-11 developed by Committee E42.06, ASTM BOS Volume 03.06.
  • E1560 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers has been revised to E1560-11 developed by Committee E21.05, ASTM BOS Volume 15.03.
  • E1571 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope has been revised to E1571-11 developed by Committee E07.07, ASTM BOS Volume 03.03.
  • E1594 Standard Guide for Expression of Temperature has been revised to E1594-11 developed by Committee E20.91, ASTM BOS Volume 14.03.
  • E1634 Standard Guide for Performing Sputter Crater Depth Measurements has been revised to E1634-11 developed by Committee E42.06, ASTM BOS Volume 03.06.
  • E1638 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media has been revised to E1638-11a developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems has been revised to E1680-11 developed by Committee E06.57, ASTM BOS Volume 04.11.
  • E1767 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials has been revised to E1767-11 developed by Committee E12.03, ASTM BOS Volume 06.01.
  • E1823 Standard Terminology Relating to Fatigue and Fracture Testing has been revised to E1823-11 developed by Committee E08.02, ASTM BOS Volume 03.01.
  • E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics has been revised to E1915-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range has been revised to E1921-11a developed by Committee E08.07, ASTM BOS Volume 03.01.
  • E1942 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing has been editorially changed, available as E1942-98(2010)e1 developed by Committee E08.03, ASTM BOS Volume 03.01.
  • E1984 Standard Guide for Process of Sustainable Brownfields Redevelopment (Withdrawn 2012) has been withdrawn, with no replacement. E1984-03 developed by Committee E50.02, ASTM BOS Volume 11.05.
  • E2014 Standard Guide on Metallographic Laboratory Safety has been revised to E2014-11 developed by Committee E04.17, ASTM BOS Volume 03.01.
  • E2016 Standard Specification for Industrial Woven Wire Cloth has been revised to E2016-11 developed by Committee E29.01, ASTM BOS Volume 14.02.
  • E2110 Standard Terminology for Exterior Insulation and Finish Systems (EIFS) has been revised to E2110-11 developed by Committee E06.58, ASTM BOS Volume 04.11.
  • E2121 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings has been revised to E2121-11 developed by Committee E06.41, ASTM BOS Volume 04.12.
  • E2144 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres has been revised to E2144-11 developed by Committee E34.50, ASTM BOS Volume 11.03.
  • E2148 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety has been revised to E2148-11b developed by Committee E34.50, ASTM BOS Volume 11.03.
  • E2178 Standard Test Method for Air Permeance of Building Materials has been revised to E2178-11 developed by Committee E06.41, ASTM BOS Volume 04.12.
  • E2181/E2181M Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable has been revised to E2181/E2181M-11 developed by Committee E20.04, ASTM BOS Volume 14.03.
  • E2208 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems has been editorially changed, available as E2208-02(2010)e1 developed by Committee E08.03, ASTM BOS Volume 03.01.
  • E2244 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer has been revised to E2244-11 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2245 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer has been revised to E2245-11 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2246 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer has been revised to E2246-11 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2277 Standard Guide for Design and Construction of Coal Ash Structural Fills (Withdrawn 2012) has been withdrawn, with no replacement. E2277-03 developed by Committee E50.03, ASTM BOS Volume 11.05.
  • E2299 Standard Guide for Sensory Evaluation of Products by Children has been revised to E2299-11 developed by Committee E18.05, ASTM BOS Volume 15.08.
  • E2304 Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System has been reapproved, available as E2304-03(2011) developed by Committee E10.01, ASTM BOS Volume 12.02.
  • E2318 Standard Guide for Environmental Health Site Assessment Process for Military Deployments (Withdrawn 2012) has been withdrawn, with no replacement. E2318-03 developed by Committee E50.05, ASTM BOS Volume 11.05.
  • E2324 Standard Guide for PDD Paired Testing has been reapproved, available as E2324-04(2011) developed by Committee E52.05, ASTM BOS Volume 14.02.
  • E2339 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) has been revised to E2339-11 developed by Committee E07.11, ASTM BOS Volume 03.03.
  • E2386 Standard Guide for the Conduct of PDD Screening Examinations has been reapproved, available as E2386-04(2011) developed by Committee E52.05, ASTM BOS Volume 14.02.
  • E2422 Standard Digital Reference Images for Inspection of Aluminum Castings has been revised to E2422-11 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E2443 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets has been editorially changed, available as E2443-05(2010)e1 developed by Committee E08.03, ASTM BOS Volume 03.01.
  • E2444 Terminology Relating to Measurements Taken on Thin, Reflecting Films has been revised to E2444-11 developed by Committee E08.02, ASTM BOS Volume 03.01.
  • E2450 Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments has been revised to E2450-11 developed by Committee E10.07, ASTM BOS Volume 12.02.
  • E2461 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs has been reapproved, available as E2461-05(2011) developed by Committee E06.51, ASTM BOS Volume 04.12.
  • E2478 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission has been revised (with title change) to E2478-11 developed by Committee E07.04, ASTM BOS Volume 03.03.
  • E2515 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel has been revised to E2515-11 developed by Committee E06.54, ASTM BOS Volume 04.12.
  • E2548 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis has been editorially changed, available as E2548-11e1 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E2657 Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids has been revised to E2657-11 developed by Committee E34.50, ASTM BOS Volume 11.03.
  • E2660 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications has been revised to E2660-11 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E2663 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods has been revised to E2663-11 developed by Committee E07.11, ASTM BOS Volume 03.03.
  • E2669 Standard Digital Reference Images for Titanium Castings has been revised to E2669-11 developed by Committee E07.02, ASTM BOS Volume 03.03.
  • E2680 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) has been editorially changed, available as E2680-09e1 developed by Committee E15.02, ASTM BOS Volume 15.05.
  • E2699 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods has been revised to E2699-11 developed by Committee E07.11, ASTM BOS Volume 03.03.
  • E2713 Standard Guide to Forensic Engineering is a new standard, now available. E2713-11 developed by Committee E58.01, ASTM BOS Volume 14.02.
  • E2714 Standard Test Method for Creep-Fatigue Testing has been editorially changed, available as E2714-09e1 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E2738 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods has been revised to E2738-11 developed by Committee E07.11, ASTM BOS Volume 03.03.
  • E2760 Standard Test Method for Creep-Fatigue Crack Growth Testing has been editorially changed, available as E2760-10e1 developed by Committee E08.06, ASTM BOS Volume 03.01.
  • E2767 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods has been revised to E2767-11 developed by Committee E07.11, ASTM BOS Volume 03.03.
  • E2771 Standard Terminology for Homeland Security Applications is a new standard, now available. E2771-11 developed by Committee E54.92, ASTM BOS Volume 15.08.
  • E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion is a new standard, now available. E2792-11 developed by Committee E01.04, ASTM BOS Volume 03.05.
  • E2804 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Stairs/Landings is a new standard, now available. E2804-11 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2810 Standard Practice for Demonstrating Capability to Comply with the Test for Uniformity of Dosage Units is a new standard, now available. E2810-11 developed by Committee E55.03, ASTM BOS Volume 14.02.
  • E2826 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Continuous Pitch/Roll Ramps is a new standard, now available. E2826-11 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2827 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Crossing Pitch/Roll Ramps is a new standard, now available. E2827-11 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2828 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Terrains: Symmetric Stepfields is a new standard, now available. E2828-11 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2829 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed is a new standard, now available. E2829-11 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2830 Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds is a new standard, now available. E2830-11 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2837 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies is a new standard, now available. E2837-11 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2838 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) is a new standard, now available. E2838-11 developed by Committee E54.03, ASTM BOS Volume 15.08.
  • E2840 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots is a new standard, now available. E2840-11 developed by Committee E17.42, ASTM BOS Volume 04.03.
  • E2848 Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance is a new standard, now available. E2848-11 developed by Committee E44.09, ASTM BOS Volume 12.02.
  • E2856 Standard Guide for Estimation of LNAPL Transmissivity is a new standard, now available. E2856-11 developed by Committee E50.04, ASTM BOS Volume 11.05.
  • E2857 Standard Guide for Validating Analytical Methods is a new standard, now available. E2857-11 developed by Committee E01.22, ASTM BOS Volume 03.05.
  • E2861 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams is a new standard, now available. E2861-11 developed by Committee E07.05, ASTM BOS Volume 03.03.
  • F141 Standard Terminology Relating to Resilient Floor Coverings has been revised to F141-11 developed by Committee F06.10, ASTM BOS Volume 15.04.
  • F430 Standard Specification for Paper Used for Vacuum Cleaner Filter Bags has been revised (with title change) to F430-11 developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F436M Standard Specification for Hardened Steel Washers [Metric] has been revised to F436M-11 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F479 Standard Specification for In-Service Care of Insulating Blankets has been reapproved, available as F479-06(2011) developed by Committee F18.25, ASTM BOS Volume 10.03.
  • F558 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners has been revised to F558-11 developed by Committee F11.22, ASTM BOS Volume 15.08.
  • F567 Standard Practice for Installation of Chain-Link Fence has been revised to F567-11a developed by Committee F14.40, ASTM BOS Volume 01.06.
  • F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs has been editorially changed, available as F593-02(2008)e1 developed by Committee F16.04, ASTM BOS Volume 01.08.
  • F603 Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application has been reinstated, with revision to F603-12 developed by Committee F04.13, ASTM BOS Volume 13.01.
  • F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets has been revised to F606-11a developed by Committee F16.01, ASTM BOS Volume 01.08.
  • F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition has been revised to F620-11 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F629 Standard Practice for Radiography of Cast Metallic Surgical Implants has been revised to F629-11 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F655 Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing has been revised to F655-11 developed by Committee F11.21, ASTM BOS Volume 15.08.
  • F690 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems (Withdrawn 2012) has been withdrawn, with no replacement. F690-86(2003)e2 developed by Committee F17.61, ASTM BOS Volume 08.04.
  • F712 Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers has been reapproved, available as F712-06(2011) developed by Committee F18.25, ASTM BOS Volume 10.03.
  • F718 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet has been reapproved (with editorial change), available as F718-07(2011)e1 developed by Committee F25.01, ASTM BOS Volume 01.07.
  • F735 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method has been revised to F735-11 developed by Committee F07.08, ASTM BOS Volume 15.03.
  • F820 Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems has been revised to F820-11 developed by Committee F11.22, ASTM BOS Volume 15.08.
  • F862 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids has been reinstated, with revision to F862-11 developed by Committee F07.07, ASTM BOS Volume 15.03.
  • F900 Standard Specification for Industrial and Commercial Swing Gates has been revised to F900-11 developed by Committee F14.40, ASTM BOS Volume 01.06.
  • F912 Standard Specification for Alloy Steel Socket Set Screws has been revised to F912-11 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F912M Standard Specification for Alloy Steel Socket Set Screws (Metric) has been revised to F912M-11 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F963 Standard Consumer Safety Specification for Toy Safety has been revised to F963-11 developed by Committee F15.22, ASTM BOS Volume 15.11.
  • F970 Standard Test Method for Static Load Limit has been reapproved, available as F970-07(2011) developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F977 Standard Consumer Safety Specification for Infant Walkers has been revised to F977-11b developed by Committee F15.17, ASTM BOS Volume 15.11.
  • F1114 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray has been revised (with title change) to F1114-11 developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners has been revised (with designation change) to F1136/F1136M-11 developed by Committee F16.03, ASTM BOS Volume 01.08.
  • F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] (Withdrawn 2011) has been withdrawn and replaced by F1136-10 developed by Committee F16.03, ASTM BOS Volume 01.08.
  • F1150 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly has been revised to F1150-11 developed by Committee F26.01, ASTM BOS Volume 15.12.
  • F1251 Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices (Withdrawn 2012) has been withdrawn, with no replacement. F1251-89(2003) developed by Committee F04.11, ASTM BOS Volume 13.01.
  • F1295 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700) has been revised to F1295-11 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F1334 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners has been revised to F1334-11 developed by Committee F11.25, ASTM BOS Volume 15.08.
  • F1378 Standard Specification for Shoulder Prostheses has been revised to F1378-12 developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F1426 Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use has been revised to F1426-11 developed by Committee F09.94, ASTM BOS Volume 09.02.
  • F1436 Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings has been revised to F1436-11 developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F1465 Standard Guide for Selection of Security Control Systems (Withdrawn 2012) has been withdrawn, with no replacement. F1465-03 developed by Committee F33.06, ASTM BOS Volume 15.08.
  • F1537 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539) has been revised to F1537-11 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F1544 Standard Specification for Determining the Rating Velocities of a Compound Archery Bow has been revised (with title change) to F1544-11 developed by Committee F08.16, ASTM BOS Volume 15.07.
  • F1584 Standard Practice for Marking Buildings During Disaster Search Operations (Withdrawn 2012) has been withdrawn, with no replacement. F1584-95(2003) developed by Committee F32.02, ASTM BOS Volume 13.02.
  • F1649 Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems (Withdrawn 2012) has been withdrawn, with no replacement. F1649-96(2003) developed by Committee F09.20, ASTM BOS Volume 09.02.
  • F1789 Standard Terminology for F16 Mechanical Fasteners has been revised to F1789-11b developed by Committee F16.94, ASTM BOS Volume 01.08.
  • F1821 Standard Consumer Safety Specification for Toddler Beds has been revised to F1821-11b developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F1826 Standard Specification for Live Line and Measuring Telescoping Tools has been reapproved, available as F1826-00(2011) developed by Committee F18.35, ASTM BOS Volume 10.03.
  • F1839 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments has been editorially changed, available as F1839-08e2 developed by Committee F04.21, ASTM BOS Volume 13.01.
  • F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength has been revised to F1852-11 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F1876 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012) has been withdrawn, with no replacement. F1876-98(2003)e1 developed by Committee F04.11, ASTM BOS Volume 13.01.
  • F1881 Standard Test Method for Measuring Baseball Bat Performance Factor has been revised to F1881-11 developed by Committee F08.26, ASTM BOS Volume 15.07.
  • F1890 Standard Test Method for Measuring Softball Bat Performance Factor has been revised to F1890-11 developed by Committee F08.26, ASTM BOS Volume 15.07.
  • F1914 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering has been reapproved, available as F1914-07(2011) developed by Committee F06.30, ASTM BOS Volume 15.04.
  • F2007 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities has been revised to F2007-11 developed by Committee F24.60, ASTM BOS Volume 15.07.
  • F2066 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150) has been revised to F2066-11 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F2083 Standard Specification for Total Knee Prosthesis has been revised to F2083-11 developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F2085 Standard Consumer Safety Specification for Portable Bed Rails has been revised to F2085-12 developed by Committee F15.11, ASTM BOS Volume 15.11.
  • F2105 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems has been revised to F2105-11 developed by Committee F11.22, ASTM BOS Volume 15.08.
  • F2130 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials has been revised to F2130-11 developed by Committee F23.30, ASTM BOS Volume 11.03.
  • F2156 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope has been revised to F2156-11 developed by Committee F07.08, ASTM BOS Volume 15.03.
  • F2200 Standard Specification for Automated Vehicular Gate Construction has been revised to F2200-11b developed by Committee F14.10, ASTM BOS Volume 01.06.
  • F2219 Standard Test Methods for Measuring High-Speed Bat Performance has been revised to F2219-11 developed by Committee F08.26, ASTM BOS Volume 15.07.
  • F2243 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft has been revised to F2243-11 developed by Committee F37.30, ASTM BOS Volume 15.11.
  • F2261 Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type has been reapproved, available as F2261-06(2011) developed by Committee F17.40, ASTM BOS Volume 08.04.
  • F2263 Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water has been reapproved, available as F2263-07(2011) developed by Committee F17.40, ASTM BOS Volume 08.04.
  • F2322 Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities (Withdrawn 2012) has been withdrawn, with no replacement. F2322-03 developed by Committee F33.02, ASTM BOS Volume 15.08.
  • F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners has been revised to F2329-11 developed by Committee F16.03, ASTM BOS Volume 01.08.
  • F2331 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials has been revised (with title change) to F2331-11 developed by Committee F17.20, ASTM BOS Volume 08.04.
  • F2372 Standard Consumer Safety Performance Specification for Shopping Carts has been revised to F2372-11a developed by Committee F15.56, ASTM BOS Volume 15.11.
  • F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets has been revised to F2408-11 developed by Committee F14.35, ASTM BOS Volume 01.06.
  • F2421 Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage has been reapproved, available as F2421-05(2011) developed by Committee F06.20, ASTM BOS Volume 15.04.
  • F2479 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing has been revised to F2479-11 developed by Committee F08.63, ASTM BOS Volume 15.07.
  • F2534 Standard Guide for Visually Estimating Oil Spill Thickness on Water has been revised to F2534-12 developed by Committee F20.16, ASTM BOS Volume 11.05.
  • F2544 Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units has been revised to F2544-11 developed by Committee F11.25, ASTM BOS Volume 15.08.
  • F2561 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner has been revised to F2561-11 developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F2564 Standard Specification for Design and Performance of a Light Sport Glider has been revised to F2564-11 developed by Committee F37.10, ASTM BOS Volume 15.11.
  • F2576 Standard Terminology Relating to Declarable Substances in Materials has been revised to F2576-11 developed by Committee F40.91, ASTM BOS Volume 10.04.
  • F2589 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets has been revised to F2589-11 developed by Committee F14.35, ASTM BOS Volume 01.06.
  • F2599 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner has been revised to F2599-11 developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F2609 Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners has been revised to F2609-11 developed by Committee F11.21, ASTM BOS Volume 15.08.
  • F2611 Standard Guide for Design and Construction of Chain Link Security Fencing has been revised to F2611-11 developed by Committee F14.50, ASTM BOS Volume 01.06.
  • F2613 Standard Consumer Safety Specification for Children's Folding Chairs has been revised to F2613-11 developed by Committee F15.59, ASTM BOS Volume 15.11.
  • F2620 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings has been editorially changed, available as F2620-11e1 developed by Committee F17.20, ASTM BOS Volume 08.04.
  • F2670 Standard Consumer Safety Specification for Infant Bath Tubs has been revised to F2670-11a developed by Committee F15.20, ASTM BOS Volume 15.11.
  • F2737 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units has been revised to F2737-11 developed by Committee F17.26, ASTM BOS Volume 08.04.
  • F2743 Standard Guide for Coating Inspection and Acute Particulate Characterization of Coated Drug-Eluting Vascular Stent Systems is a new standard, now available. F2743-11 developed by Committee F04.30, ASTM BOS Volume 13.01.
  • F2772 Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems has been revised to F2772-11 developed by Committee F08.52, ASTM BOS Volume 15.07.
  • F2800 Standard Specification for Recirculating Hood System for Cooking Appliances is a new standard, now available. F2800-11 developed by Committee F26.07, ASTM BOS Volume 15.12.
  • F2856 Standard Practice for Transfilling and Safe Handling of Small CO2 Cylinders for Use in Paintball has been revised (with title change) to F2856-11a developed by Committee F08.24, ASTM BOS Volume 15.07.
  • F2863 Standard Specification for Central Vacuum Hose Inlet Valve Socket Dimensions is a new standard, now available. F2863-11 developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F2896 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids is a new standard, now available. F2896-11 developed by Committee F17.11, ASTM BOS Volume 08.04.
  • F2897 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances) has been revised to F2897-11a developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F2906 Standard Consumer Safety Specification for Bedside Sleepers is a new standard, now available. F2906-11 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F2913 Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester is a new standard, now available. F2913-11 developed by Committee F13.30, ASTM BOS Volume 15.07.
  • F2918 Standard Test Method for Weighing a Bicycle is a new standard, now available. F2918-11 developed by Committee F08.10, ASTM BOS Volume 15.07.
  • F2931 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products is a new standard, now available. F2931-11 developed by Committee F40.02, ASTM BOS Volume 10.04.
  • G42 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures has been revised to G42-11 developed by Committee D01.48, ASTM BOS Volume 06.02.
  • G52 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater has been reapproved, available as G52-00(2011) developed by Committee G01.09, ASTM BOS Volume 03.02.
  • G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation has been revised (with title change) to G91-11 developed by Committee G01.04, ASTM BOS Volume 03.02.

Published in international.