ASTM STANDARDS

Issue 45 – December 2012

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A34/A34M Standard Practice for Sampling and Procurement Testing of Magnetic Materials has been reapproved, available as A34/A34M-06(2012) developed by Committee A06.01, ASTM BOS Volume 03.04.
  • A48/A48M Standard Specification for Gray Iron Castings has been reapproved, available as A48/A48M-03(2012) developed by Committee A04.01, ASTM BOS Volume 01.02.
  • A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products has been revised to A370-12a developed by Committee A01.13, ASTM BOS Volume 01.01.
  • A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels has been revised to A479/A479M-12 developed by Committee A01.17, ASTM BOS Volume 01.03.
  • A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy has been revised to A494/A494M-12 developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use has been revised to A781/A781M-12b developed by Committee A01.18, ASTM BOS Volume 01.02.
  • A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement has been editorially changed, available as A955/A955M-12e1 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength has been revised to A1011/A1011M-12b developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1067/A1067M Standard Specification for Test Coupons for Steel Castings has been revised to A1067/A1067M-12a developed by Committee A01.18, ASTM BOS Volume 01.02.
  • B9 Standard Specification for Bronze Trolley Wire has been reapproved, available as B9-90(2012) developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B116 Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage has been reapproved, available as B116-95(2012) developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes has been revised to B140/B140M-12 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys has been revised to B154-12 developed by Committee B05.06, ASTM BOS Volume 02.01.
  • B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire has been revised to B206/B206M-12 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B230/B230M Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes has been reapproved, available as B230/B230M-07(2012) developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors has been revised to B231/B231M-12 developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire has been revised to B250/B250M-12 developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B520 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application has been revised to B520-12 developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants has been revised to B552-12 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B559 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application has been revised to B559-12 developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B587 Standard Specification for Welded Brass Tube has been revised to B587-12 developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B601 Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast has been revised to B601-12 developed by Committee B05.91, ASTM BOS Volume 02.01.
  • B888 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts has been revised to B888-12 developed by Committee B05.01, ASTM BOS Volume 02.01.
  • C16 Standard Test Method for Load Testing Refractory Shapes at High Temperatures has been reapproved, available as C16-03(2012) developed by Committee C08.01, ASTM BOS Volume 15.01.
  • C120/C120M Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity) has been revised to C120/C120M-12 developed by Committee C18.01, ASTM BOS Volume 04.07.
  • C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations has been reapproved, available as C165-07(2012) developed by Committee C16.32, ASTM BOS Volume 04.06.
  • C240 Standard Test Methods of Testing Cellular Glass Insulation Block has been reapproved, available as C240-08(2012) developed by Committee C16.32, ASTM BOS Volume 04.06.
  • C475/C475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board has been revised to C475/C475M-12 developed by Committee C11.02, ASTM BOS Volume 04.01.
  • C552 Standard Specification for Cellular Glass Thermal Insulation has been revised to C552-12b developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation has been revised to C578-12a developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C604 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer has been reapproved, available as C604-02(2012) developed by Committee C08.03, ASTM BOS Volume 15.01.
  • C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster has been revised to C1063-12c developed by Committee C11.03, ASTM BOS Volume 04.01.
  • C1099 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures has been reapproved, available as C1099-07(2012) developed by Committee C08.01, ASTM BOS Volume 15.01.
  • C1130 Standard Practice for Calibrating Thin Heat Flux Transducers has been reapproved, available as C1130-07(2012) developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards has been reapproved, available as C1185-08(2012) developed by Committee C17.02, ASTM BOS Volume 04.05.
  • C1225 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates has been reapproved, available as C1225-08(2012) developed by Committee C17.02, ASTM BOS Volume 04.05.
  • C1274 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption has been revised to C1274-12 developed by Committee C28.03, ASTM BOS Volume 15.01.
  • C1331 Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method has been reapproved, available as C1331-01(2012) developed by Committee C28.03, ASTM BOS Volume 15.01.
  • C1356 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure has been reapproved, available as C1356-07(2012) developed by Committee C01.23, ASTM BOS Volume 04.01.
  • C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation has been revised to C1410-12 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation has been revised to C1482-12 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1495 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics has been reapproved, available as C1495-07(2012) developed by Committee C28.01, ASTM BOS Volume 15.01.
  • C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation has been revised to C1497-12 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1528 Standard Guide for Selection of Dimension Stone has been revised to C1528-12b developed by Committee C18.08, ASTM BOS Volume 04.07.
  • C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation has been revised to C1558-12 developed by Committee C16.30, ASTM BOS Volume 04.06.
  • C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD has been revised to C1577-12 developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1616 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight has been reapproved, available as C1616-07(2012) developed by Committee C16.33, ASTM BOS Volume 04.06.
  • C1648 Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass has been revised to C1648-12 developed by Committee C14.11, ASTM BOS Volume 15.02.
  • D91 Standard Test Method for Precipitation Number of Lubricating Oils has been reapproved, available as D91-02(2012) developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D94 Standard Test Methods for Saponification Number of Petroleum Products has been reapproved, available as D94-07(2012) developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D197 Standard Test Method for Sampling and Fineness Test of Pulverized Coal has been reapproved, available as D197-87(2012) developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D291 Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal has been reapproved, available as D291-07(2012) developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation has been reapproved, available as D322-97(2012) developed by Committee D02.06, ASTM BOS Volume 05.01.
  • D440 Standard Test Method of Drop Shatter Test for Coal has been reapproved, available as D440-07(2012) developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D441 Standard Test Method of Tumbler Test for Coal has been reapproved, available as D441-07(2012) developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces has been reapproved, available as D610-08(2012) developed by Committee D01.25, ASTM BOS Volume 06.01.
  • D612 Standard Test Method for Carbonizable Substances in Paraffin Wax has been reapproved, available as D612-88(2012) developed by Committee D02.10.0A, ASTM BOS Volume 05.01.
  • D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels has been reapproved, available as D823-95(2012) developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D975 Standard Specification for Diesel Fuel Oils has been revised to D975-12 developed by Committee D02.E0, ASTM BOS Volume 05.01.
  • D1177 Standard Test Method for Freezing Point of Aqueous Engine Coolants has been revised to D1177-12 developed by Committee D15.03, ASTM BOS Volume 15.05.
  • D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel has been revised to D1322-12 developed by Committee D02.J0.03, ASTM BOS Volume 05.01.
  • D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products has been reapproved, available as D1475-98(2012) developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D2106 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents has been reapproved, available as D2106-07(2012) developed by Committee D26.04, ASTM BOS Volume 15.05.
  • D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker has been reapproved, available as D2134-93(2012) developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D2155 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature has been reinstated, with revision to D2155-12 developed by Committee D02.N0, ASTM BOS Volume 05.03.
  • D2310 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe has been reapproved, available as D2310-06(2012) developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D2397 Standard Specification for Cationic Emulsified Asphalt has been revised to D2397-12 developed by Committee D04.41, ASTM BOS Volume 04.03.
  • D2492 Standard Test Method for Forms of Sulfur in Coal has been reapproved, available as D2492-02(2012) developed by Committee D05.21, ASTM BOS Volume 05.06.
  • D2827 Standard Specification for Styrene Monomer has been revised to D2827-12 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D2835 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements has been reapproved, available as D2835-89(2012) developed by Committee D04.34, ASTM BOS Volume 04.03.
  • D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics has been revised to D2842-12 developed by Committee D20.22, ASTM BOS Volume 08.01.
  • D2847 Standard Practice for Testing Engine Coolants in Car and Light Truck Service has been reapproved, available as D2847-07(2012) developed by Committee D15.10, ASTM BOS Volume 15.05.
  • D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) has been revised to D2872-12 developed by Committee D04.46, ASTM BOS Volume 04.03.
  • D2924 Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe has been revised to D2924-12 developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D3453 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications has been revised to D3453-12 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D3795 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer has been reapproved, available as D3795-00a(2012) developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D3814 Standard Guide for Locating Combustion Test Methods for Polymeric Materials (Withdrawn 2012) has been withdrawn, with no replacement. D3814- developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D3851 Standard Specification for Urethane Microcellular Shoe Soling Materials has been reapproved, available as D3851-07(2012) developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges has been reapproved, available as D4014-03(2012) developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D4132 Standard Practice for Sampling Phytoplankton with Conical Tow Nets has been reapproved, available as D4132-82(2012) developed by Committee E47.01, ASTM BOS Volume 11.06.
  • D4136 Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles has been reapproved, available as D4136-82(2012) developed by Committee E47.01, ASTM BOS Volume 11.06.
  • D4137 Standard Practice for Preserving Phytoplankton Samples has been reapproved, available as D4137-82(2012) developed by Committee E47.01, ASTM BOS Volume 11.06.
  • D4148 Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method has been reapproved, available as D4148-82(2012) developed by Committee E47.01, ASTM BOS Volume 11.06.
  • D4149 Standard Classification for Sampling Phytoplankton in Surface Waters has been reapproved, available as D4149-82(2012) developed by Committee E47.01, ASTM BOS Volume 11.06.
  • D4276 Standard Practice for Confined Area Entry has been reapproved, available as D4276-02(2012) developed by Committee D26.05, ASTM BOS Volume 15.05.
  • D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers has been revised to D4280-12 developed by Committee D04.38, ASTM BOS Volume 04.03.
  • D4371 Standard Test Method for Determining the Washability Characteristics of Coal has been reapproved, available as D4371-06(2012) developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D4380 Standard Test Method for Density of Bentonitic Slurries has been revised to D4380-12 developed by Committee D18.04, ASTM BOS Volume 04.08.
  • D4383 Standard Specification for Plowable, Raised Retroreflective Pavement Markers has been revised to D4383-12 developed by Committee D04.38, ASTM BOS Volume 04.03.
  • D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator has been editorially changed, available as D4400-99(2012)e1 developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities has been revised to D4554-12 developed by Committee D18.12, ASTM BOS Volume 04.08.
  • D4580 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding has been reapproved, available as D4580-03(2012) developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D4652 Standard Specification for Silicone Fluid Used for Electrical Insulation has been reapproved, available as D4652-05(2012) developed by Committee D27.02, ASTM BOS Volume 10.03.
  • D4670 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols has been reapproved (with editorial change), available as D4670-07(2012)e1 developed by Committee D20.22, ASTM BOS Volume 08.02.
  • D4749 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size has been reapproved, available as D4749-87(2012) developed by Committee D05.07, ASTM BOS Volume 05.06.
  • D4921 Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature has been reapproved, available as D4921-95(2012) developed by Committee D15.06, ASTM BOS Volume 15.05.
  • D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method) has been revised to D5191-12 developed by Committee D02.08, ASTM BOS Volume 05.02.
  • D5301 Standard Practice for Physical Characterization of Paint Brushes has been reapproved, available as D5301-92(2012) developed by Committee D01.61, ASTM BOS Volume 06.02.
  • D5590 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay has been editorially changed, available as D5590-00(2010)e1 developed by Committee D01.28, ASTM BOS Volume 06.01.
  • D5679 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers has been reapproved, available as D5679-95a(2012) developed by Committee D34.01.02, ASTM BOS Volume 11.04.
  • D5682 Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials has been reapproved, available as D5682-08(2012) developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses has been revised to D5759-12 developed by Committee D34.03, ASTM BOS Volume 11.04.
  • D5813 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems has been reapproved, available as D5813-04(2012) developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D5865 Standard Test Method for Gross Calorific Value of Coal and Coke has been revised to D5865-12 developed by Committee D05.21, ASTM BOS Volume 05.06.
  • D5948 Standard Specification for Molding Compounds, Thermosetting has been reapproved, available as D5948-05(2012) developed by Committee D20.16, ASTM BOS Volume 08.03.
  • D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing has been reapproved, available as D5973-97(2012) developed by Committee D04.34, ASTM BOS Volume 04.03.
  • D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures has been reapproved, available as D5977-03(2012) developed by Committee D04.32, ASTM BOS Volume 04.03.
  • D6165 Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials has been reapproved, available as D6165-97(2012) developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D6209 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) has been reapproved, available as D6209-98(2012) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D6543 Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers has been reapproved, available as D6543-00(2012) developed by Committee D05.23, ASTM BOS Volume 05.06.
  • D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements has been revised to D6690-12 developed by Committee D04.33, ASTM BOS Volume 04.03.
  • D6905 Standard Test Method for Impact Flexibility of Organic Coatings has been reapproved, available as D6905-03(2012) developed by Committee D01.23, ASTM BOS Volume 06.01.
  • D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair has been revised to D7186-12 developed by Committee D08.20, ASTM BOS Volume 04.04.
  • D7233 Standard Test Method for Testing Fracture of Level Paintbrush Filaments has been reapproved, available as D7233-08(2012) developed by Committee D01.61, ASTM BOS Volume 06.02.
  • D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers has been revised to D7234-12 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D7326 Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF 3, CHF2 CF3, and CO2) has been revised to D7326-12 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D7327 Standard Specification for HFC Blend B (CH2FCF3, CHF2CF 3, and CO2) has been revised to D7327-12 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D7390 Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments has been reapproved, available as D7390-07(2012) developed by Committee D22.07, ASTM BOS Volume 11.07.
  • D7469 Standard Test Methods for End-Joints in Structural Wood Products has been revised to D7469-12 developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D7796 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography is a new standard, now available. D7796-12 developed by Committee D02.J0.02, ASTM BOS Volume 05.04.
  • D7799 Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings has been revised to D7799-12a developed by Committee D14.70, ASTM BOS Volume 15.06.
  • E196 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs has been reapproved, available as E196-06(2012) developed by Committee E06.11, ASTM BOS Volume 04.11.
  • E482 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID) has been editorially changed, available as E482-11e1 developed by Committee E10.05, ASTM BOS Volume 12.02.
  • E521 Standard Practice for Neutron Radiation Damage Simulation by Charged-Particle Irradiation has been editorially changed, available as E521-96(2009)e1 developed by Committee E10.08, ASTM BOS Volume 12.02.
  • E564 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings has been reapproved, available as E564-06(2012) developed by Committee E06.11, ASTM BOS Volume 04.11.
  • E641 Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture has been reapproved (with editorial change), available as E641-01(2012)e1 developed by Committee E35.22, ASTM BOS Volume 11.05.
  • E795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests has been reapproved, available as E795-05(2012) developed by Committee E33.01, ASTM BOS Volume 04.06.
  • E884 Standard Practice for Sampling Airborne Microorganisms at Municipal Solid-Waste Processing Facilities has been reapproved, available as E884-82(2012) developed by Committee D34.01.02, ASTM BOS Volume 11.04.
  • E989 Standard Classification for Determination of Impact Insulation Class (IIC) has been reapproved, available as E989-06(2012) developed by Committee E33.03, ASTM BOS Volume 04.06.
  • E1258 Standard Test Method for Airflow Calibration of Fan Pressurization Devices has been reapproved, available as E1258-88(2012) developed by Committee E06.41, ASTM BOS Volume 04.11.
  • E1327 Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions has been reapproved (with editorial change), available as E1327-07(2012)e1 developed by Committee E35.15, ASTM BOS Volume 11.05.
  • E2069 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters has been reapproved, available as E2069-06(2012) developed by Committee E37.01, ASTM BOS Volume 14.02.
  • E2160 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry has been reapproved, available as E2160-04(2012) developed by Committee E37.01, ASTM BOS Volume 14.02.
  • E2292 Standard Practice for Investigation of Investigating Carbon Monoxide Poisoning Incidents has been reapproved, available as E2292-04(2012) developed by Committee E58.05, ASTM BOS Volume 14.02.
  • E2403 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry has been reapproved, available as E2403-06(2012) developed by Committee E37.01, ASTM BOS Volume 14.02.
  • E2452 Standard Practice for Equipment Management Process Maturity (EMPM) Model has been revised to E2452-12 developed by Committee E53.06, ASTM BOS Volume 04.12.
  • E2500 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment has been reapproved, available as E2500-07(2012) developed by Committee E55.03, ASTM BOS Volume 14.02.
  • E2513 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems has been reapproved, available as E2513-07(2012) developed by Committee E06.77, ASTM BOS Volume 04.12.
  • E2748 Standard Guide for Fire-Resistance Experiments has been revised to E2748-12a developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2816 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems has been revised to E2816-12 developed by Committee E05.11, ASTM BOS Volume 04.07.
  • F116 Standard Specification for Medical Screwdriver Bits has been revised to F116-12 developed by Committee F04.21, ASTM BOS Volume 13.01.
  • F136 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401) has been revised to F136-12 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F310 Standard Practice for Sampling Cryogenic Aerospace Fluids has been reapproved, available as F310-07(2012) developed by Committee E21.05, ASTM BOS Volume 15.03.
  • F326 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes has been reapproved, available as F326-96(2012) developed by Committee F07.04, ASTM BOS Volume 15.03.
  • F621 Standard Specification for Stainless Steel Forgings for Surgical Implants has been revised to F621-12 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F813 Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices has been reapproved, available as F813-07(2012) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F945 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials has been revised to F945-12 developed by Committee F07.07, ASTM BOS Volume 15.03.
  • F1003 Standard Specification for Searchlights on Motor Lifeboats has been reapproved (with editorial change), available as F1003-02(2012)e1 developed by Committee F25.10, ASTM BOS Volume 01.07.
  • F1014 Standard Specification for Flashlights on Vessels has been reapproved (with editorial change), available as F1014-02(2012)e1 developed by Committee F25.10, ASTM BOS Volume 01.07.
  • F1140 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages has been reapproved, available as F1140-07(2012) developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F1198 Standard Guide for Shipboard Fire Detection Systems has been reapproved (with editorial change), available as F1198-92(2012)e1 developed by Committee F25.10, ASTM BOS Volume 01.07.
  • F1317 Standard Test Method for Calibration of Microwave Ovens has been reapproved, available as F1317-98(2012) developed by Committee F02.15, ASTM BOS Volume 15.10.
  • F1483 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe has been revised to F1483-12 developed by Committee F17.25, ASTM BOS Volume 08.04.
  • F1498 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings has been reapproved (with editorial change), available as F1498-08(2012)e1 developed by Committee F17.10, ASTM BOS Volume 08.04.
  • F1503 Standard Practice for Machine/Process Capability Study Procedure has been reapproved, available as F1503-02(2012) developed by Committee F16.93, ASTM BOS Volume 01.08.
  • F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique has been revised to F1624-12 developed by Committee F07.04, ASTM BOS Volume 15.03.
  • F1755M Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric] has been reapproved (with editorial change), available as F1755M-96(2012)e1 developed by Committee F25.10, ASTM BOS Volume 01.07.
  • F1958/F1958M Standard Test Method for Determining the Ignitability of Non-flame-Resistant Materials for Clothing by Electric Arc Exposure Method Using Mannequins has been revised to F1958/F1958M-12 developed by Committee F18.65, ASTM BOS Volume 10.03.
  • F1959/F1959M Standard Test Method for Determining the Arc Rating of Materials for Clothing has been revised to F1959/F1959M-12 developed by Committee F18.65, ASTM BOS Volume 10.03.
  • F2026 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications has been revised to F2026-12 developed by Committee F04.11, ASTM BOS Volume 13.01.
  • F2054 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates has been reapproved, available as F2054-07(2012) developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2131 Standard Test Method for In Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line has been reapproved, available as F2131-02(2012) developed by Committee F04.42, ASTM BOS Volume 13.01.
  • F2148 Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA) has been reapproved, available as F2148-07(2012) developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F2178 Standard Test Method for Determining the Arc Rating and Standard Specification for Eye or Face Protective Products has been revised to F2178-12 developed by Committee F18.65, ASTM BOS Volume 10.03.
  • F2203 Standard Test Method for Linear Measurement Using Precision Steel Rule has been reapproved, available as F2203-02(2012) developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2217 Standard Practice for Coating/Adhesive Weight Determination has been reapproved, available as F2217-02(2012) developed by Committee F02.20, ASTM BOS Volume 15.10.
  • F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108) has been revised to F2229-12 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F2259 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy has been reapproved (with editorial change), available as F2250-10(2012)e1 developed by Committee F04.42, ASTM BOS Volume 13.01.
  • F2260 Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy has been reapproved (with editorial change), available as F2260-03(2012)e1 developed by Committee F04.42, ASTM BOS Volume 13.01.
  • F2316 Standard Specification for Airframe Emergency Parachutes has been revised to F2316-12 developed by Committee F37.70, ASTM BOS Volume 15.11.
  • F2522 Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards has been revised to F2522-12 developed by Committee F18.35, ASTM BOS Volume 10.03.
  • F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225) has been revised to F2581-12 developed by Committee F04.12, ASTM BOS Volume 13.02.
  • F2603 Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds has been reapproved, available as F2603-06(2012) developed by Committee F04.42, ASTM BOS Volume 13.02.
  • F2621 Standard Practice for Determining Response Characteristics and Design Integrity of Arc Rated Finished Products in an Electric Arc Exposure has been revised to F2621-12 developed by Committee F18.65, ASTM BOS Volume 10.03.
  • G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys has been revised to G69-12 developed by Committee G01.11, ASTM BOS Volume 03.02.
  • G187 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method has been revised to G187-12 developed by Committee G01.10, ASTM BOS Volume 03.02.
  • ISO/ASTM51310 Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System has been reapproved, available as ISO/ASTM51340-04(2012)E developed by Committee E61.02, ASTM BOS Volume 12.02.
  • ISO/ASTM51540 Standard Practice for Use of a Radiochromic Liquid Dosimetry System has been reapproved, available as ISO/ASTM51540-04(2012)E developed by Committee E61.02, ASTM BOS Volume 12.02.
  • NACE/ASTMG193 Standard Terminology and Acronyms Relating to Corrosion has been revised to NACE/ASTMG193-12c developed by Committee J01.02, ASTM BOS Volume 03.02.

Published in international.