ISO PUBLICATIONS

Issue 42 – September 2012

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 212:2007 Essential oils. Sampling
    AMENDMENT 1:July 2012
  • ISO 1140:2012 (Edition 4) Fibre ropes. Polyamide. 3-, 4-, 8- and 12-strand ropes
  • ISO 1141:2012 (Edition 4) Fibre ropes. Polyester. 3-, 4-, 8- and 12-strand ropes
  • ISO 1346:2012 (Edition 4) Fibre ropes. Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3). 3-, 4-, 8- and 12-strand ropes
  • ISO 1927-1:2012 Monolithic (unshaped) refractory products. Introduction and classification
  • ISO 3517:2012 (Edition 3) Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
  • ISO 3601-1:2012 Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes
    CORRIGENDUM 1:July 2012
  • ISO 3673-2:2012 (Edition 3) Plastics. Epoxy resins. Preparation of test specimens and determination of properties of crosslinked epoxy resins
  • ISO 4377:2012 (Edition 4) Hydrometric determinations. Flow measurement in open channels using structures. Flat-V weirs
  • ISO 4656:2012 (Edition 2) Rubber compounding ingredients. Carbon black. Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
  • ISO 4919:2012 (Edition 2) Carpets. Determination of tuft withdrawal force
  • ISO 4965-1:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Testing systems
  • ISO 4965-2:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Dynamic calibration device (DCD) instrumentation
  • ISO 5001:2012 (Edition 5) Cold-reduced carbon steel sheet for vitreous enamelling
  • ISO 5172:2006 Gas welding equipment. Blowpipes for gas welding, heating and cutting. Specifications and tests
    AMENDMENT 1:July 2012
  • ISO 6363-1:2012 (Edition 2) Wrought aluminium and aluminium alloys. old-drawn rods/bars, tubes and wires. Technical conditions for inspection and delivery
  • ISO 6363-2:2012 (Edition 2) Wrought aluminium and aluminium alloys. Cold-drawn rods/bars and tubes and wires. Mechanical properties
  • ISO 6363-3:2012 Wrought aluminium and aluminium alloys. Cold-drawn rods/bars, tubes and wires. Drawn round bars and wires. Tolerances on form and dimensions (symmetric plus and minus tolerances on diameter)
  • ISO 6363-4:2012 (Edition 2) Wrought aluminium and aluminium alloys. Cold-drawn rods/bars, tubes and wires. Drawn rectangular bars and wires. Tolerances on form and dimensions
  • ISO 6363-5:2012 (Edition 2) Wrought aluminium and aluminium alloys. Cold-drawn rods/bars, tubes and wires. Drawn square and hexagonal bars and wires. Tolerances on form and dimensions
  • ISO 6363-6:2012 Wrought aluminium and aluminium alloys. Cold-drawn rods/bars, tubes and wires. Drawn round tubes. Tolerances on form and dimensions
  • ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation
  • ISO 6953-3:2012 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators
  • ISO 7202:2012 (Edition 2) Fire protection. Fire extinguishing media. Powder
  • ISO 8600-7:2012 Endoscopes. Medical endoscopes and endotherapy devices. Basic requirements for medical endoscopes of water-resistant type
  • ISO 8820-8:2012 Road vehicles. Fuse-links. Fuse-links with bolt-in contacts (Type H and J) with rated voltage of 450 V
  • ISO 9233-1:2007 Cheese, cheese rind and processed cheese. Determination of natamycin content. Molecular absorption spectrometric method for cheese rind
    AMENDMENT 1:July 2012
  • ISO 9233-2:2007 Cheese, cheese rind and processed cheese. Determination of natamycin content. High performance liquid chromatographic method for cheese, cheese rind and processed cheese
    AMENDMENT 1:July 2012
  • ISO 9606-1:2012 (Edition 2) Qualification testing of welders. Fusion welding. Steels
  • ISO/IEC 9798-4:1999 Information technology. Security techniques. Entity authentication. Mechanisms using a cryptographic check function
    CORRIGENDUM 2:July 2012
  • ISO/IEC 9899:2011 Information technology. Programming languages. C
    CORRIGENDUM 1:July 2012
  • ISO 9924-2:2000 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrilebutadiene and halobutyl rubbers
    AMENDMENT 1:July 2012
  • ISO 10077-2:2012 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Numerical method for frames
    CORRIGENDUM 1:July 2012
  • ISO 10295-3:2012 Fire tests for building elements and components. Fire testing of service installations. Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials
  • ISO/IEC 10373-6:2011 Identification cards. Test methods. Proximity cards
    AMENDMENT 3:August 2012
  • ISO 10575:2012 Resilient floor coverings. Specification for rubber sheet floor coverings with backing
  • ISO 10577:2012 Resilient floor coverings. Specification for rubber sheet floor coverings without backing
  • ISO 10649-5:2012 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
  • ISO 10649-6:2012 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with modular taper interface with ball track system
  • ISO 11119-1:2012 (Edition 2) Gas cylinders. Refillable composite gas cylinders and tubes. Design, construction and testing. Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
  • ISO 11119-2:2012 (Edition 2) Gas cylinders. Refillable composite gas cylinders and tubes. Design, construction and testing. Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with loadsharing metal liners
  • ISO 11336-1:2012 Large yachts. Strength, weathertightness and watertightness of glazed openings. Design criteria, materials, framing and testing of independent glazed openings
  • ISO 11665-5:2012 Measurement of radioactivity in the environment. Air: radon-222. Continuous measurement method of the activity concentration
  • ISO 11747:2012 Rice. Determination of rice kernel resistance to extrusion after cooking
  • ISO 11855-1:2012 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Definition, symbols, and comfort criteria
  • ISO 11855-4:2012 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)
  • ISO 12211:2012 Petroleum, petrochemical and natural gas industries. Spiral plate heat exchangers
  • ISO 12212:2012 Petroleum, petrochemical and natural gas industries. Hairpin-type heat exchangers
  • ISO 12671:2012 Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
  • ISO/TR 13014:2012 Nanotechnologies. Guidance on physicochemical characterization of engineered nanoscale materials for toxicologic assessment
    CORRIGENDUM 1:July 2012
  • ISO 13017:2012 Dentistry. Magnetic attachments
  • ISO/TR 13054:2012 Knowledge management of health information standards
  • ISO 13073-1:2012 Ships and marine technology. Risk assessment on anti-fouling systems on ships. Marine environmental risk assessment method of biocidally active substances used for antifouling systems on ships
  • ISO 13160:2012 Water quality. Strontium 90 and strontium 89. Test methods using liquid scintillation counting or proportional counting
  • ISO 13232-1:2005 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definitions, symbols and general considerations
    AMENDMENT 1:July 2012
  • ISO 13232-3:2005 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Motorcyclist anthropometric impact dummy
    AMENDMENT 1:July 2012
  • ISO 13232-5:2005 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Injury indices and risk/benefit analysis
    AMENDMENT 1:July 2012
  • ISO 13232-6:2005 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Full-scale impact test procedures
    AMENDMENT 1:July 2012
  • ISO 13232-7:2005 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Standardized procedures for performing computer simulations of motorcycle impact tests
    AMENDMENT 1:July 2012
  • ISO 13232-8:2005 Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Documentation and reports
    AMENDMENT 1:July 2012
  • ISO 13408-7:2012 Aseptic processing of health care products. Alternative processes for medical devices and combination products
  • ISO 13444:2012 Technical product documentation (TPD). Dimensioning and indication of knurling
  • ISO 13459:2012 (Edition 2) Earth-moving machinery. Trainer seat. Deflection limiting volume, space envelope and performance requirements
  • ISO 13504:2012 Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment
  • ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
  • ISO 13939:2012 Foil bearings. Guidelines for testing of the performance of foil journal bearings. Testing of load capacity, friction coefficient and lifetime
  • ISO 14117:2012 Active implantable medical devices. Electromagnetic compatibility. EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
  • ISO 14238:2012 (Edition 2) Soil quality. Biological methods. Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes
  • ISO 14291:2012 Vacuum gauges. Definitions and specifications for quadrupole mass spectrometers
  • ISO/IEC 14443-2:2010 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface
    AMENDMENT 2:August 2012
  • ISO/IEC 14496-3:2009 Information technology. Coding of audio-visual objects. Audio
    AMENDMENT 3:August 2012
  • ISO/IEC 14496-12:2012 (Edition 4) Information technology. Coding of audio-visual objects. ISO base media file format
  • ISO/IEC 14496-15:2010 Information technology. Coding of audio-visual objects. Advanced Video Coding (AVC) file format
    CORRIGENDUM 2:July 2012
  • ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature
  • ISO 15181-6:2012 Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of tralopyril release rate by quantitation of its degradation product in the extract
  • ISO/IEC 15444-9:2005 Information technology. JPEG 2000 image coding system: Interactivity tools, APIs and Protocols. Part 9
    CORRIGENDUM 3:December 2011
  • ISO/IEC 15444-12:2012 (Edition 4) Information technology. JPEG 2000 image coding system. ISO base media file format
  • ISO/TR 15499:2012 Biological evaluation of medical devices. Guidance on the conduct of biological evaluation within a risk management process
  • ISO 15632:2012 (Edition 2) Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
  • ISO 15685:2012 (Edition 2) Soil quality. Determination of potential nitrification and inhibition of nitrification. Rapid test by ammonium oxidation
  • ISO 16000-26:2012 Indoor air. Sampling strategy for carbon dioxide (CO2)
  • ISO/TR 16178:2012 (Edition 2) Footwear. Critical substances potentially present in footwear and footwear components
  • ISO 16415:2012 Non-structural timber grading requirements
  • ISO 16484-5:2012 (Edition 4) Building automation and control systems. Data communication protocol
  • ISO 17263:2012 Intelligent transport systems. Automatic vehicle and equipment identification. System parameters
  • ISO 17769-1:2012 Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units. Liquid pumps
  • ISO 17769-2:2012 Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units. Pumping system
  • ISO/IEC 18000-61:2012 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz Type A
  • ISO/IEC 18000-62:2012 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz Type B
  • ISO/IEC 18000-64:2012 Information technology. Radio frequency identification for item management. Parameters for air interface communications at 860 MHz to 960 MHz Type D
  • ISO/IEC 18013-3:2009 Information technology. Personal identification. Access control, authentication and integrity validation
    AMENDMENT 1:July 2012
  • ISO 18393-1:2012 Thermal insulation products. Determination of ageing by settlement. Blown loose-fill insulation for ventilated attics
  • ISO 19144-1:2009 Geographic information. Classification systems. Classification system structure
    CORRIGENDUM 1:August 2012
  • ISO 19432:2012 (Edition 2) Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements
  • ISO 19905-1-1:2012 Petroleum and natural gas industries. Site specific assessment of mobile offshore units. Jack-ups
  • ISO 20643:2005 Mechanical vibration. Hand-held and hand-guided machinery. Principles for evaluation of vibration emission
    AMENDMENT 1:July 2012
  • ISO/TS 21033:2011 Animal and vegetable fats and oils. Determination of trace elements by inductively coupled plasma optical emission spectroscopy (ICP-OES)
    AMENDMENT 1:July 2012
  • ISO 21940-21:2012 Mechanical vibration. Rotor balancing. Description and evaluation of balancing machines
  • ISO/TS 22028-3:2012 (Edition 2) Photography and graphic technology. Extended colour encodings for digital image storage, manipulation and interchange. Reference input medium metric RGB colour image encoding (RIMM RGB)
  • ISO/TS 22113:2012 Milk and milk products. Determination of the titratable acidity of milk fat
  • ISO 23274-2:2012 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Externally chargeable vehicles
  • ISO/TS 24533:2012 Intelligent transport systems. Electronic information exchange to facilitate the movement of freight and its intermodal transfer. Road transport information exchange methodology
  • ISO 26900:2012 Space data and information transfer systems. Orbit data messages
  • ISO/IEC TS 29112:2012 Information technology. Office equipment. Test charts and methods for measuring monochrome printer resolution
  • ISO/IEC TR 29162:2012 Information technology. Guidelines for using data structures in AIDC media
  • ISO/IEC TR 29186:2012 Information technology. Office equipment. Test method of colour gamut mapping algorithm for office colour softcopy and hardcopy
  • ISO 30004:2012 Ships and marine technology. Ship recycling management systems. Guidelines for the implementation of ISO 30000

ISO/PAS PUBLICATIONS

  • ISO/PAS 17506:2012 Industrial automation systems and integration. COLLADA digital asset schema specification for 3D visualization of industrial data
  • ISO/PAS 28004-2:2012 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Guidelines for adopting ISO 28000 for use in medium and small seaport operations
  • ISO/PAS 28004-3:2012 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other than marine ports)
  • ISO/PAS 28004-4:2012 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective

Published in international.