IEC PUBLICATIONS

Issue 42 – September 2012

You can now purchase PDFs of IEC Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. IEC Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel.

  • IEC 60076-18:2012 Power transformers. Measurement of frequency response
  • IEC 60079-20-1:2010 Explosive atmospheres. Material characteristics for gas and vapour classification. Test methods and data
    CORRIGENDUM 1: July 2012
  • IEC 60294:2012 (Edition 2) Measurement of the dimensions of a cylindrical component with axial terminations
  • IEC 60301:2012 (Edition 3) Preferred diameters of wire terminations of capacitors and resistors
  • IEC 60317-0-8:2012 Specifications for particular types of winding wires. General requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire
  • IEC 60317-2:2012 (Edition 4) Specifications for particular types of winding wires. Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer
  • IEC 60317-48:2012 (Edition 2) Specifications for particular types of winding wires. Glass-fibre wound resin or varnish impregnated, bare or enameled round copper wire, temperature index 155
  • IEC 60317-49:2012 (Edition 2) Specifications for particular types of winding wires. Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
  • IEC 60317-50:2012 (Edition 2) Specifications for particular types of winding wires. Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200
  • IEC 60317-61:2012 Specifications for particular types of winding wires. Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
  • IEC 60317-62:2012 Specifications for particular types of winding wires. Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
  • IEC 60335-2-89:2010 Household and similar electrical appliances. Safety. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
    AMENDMENT 1:July 2012
  • IEC 60544-2:2012 (Edition 3) Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials. Procedures for irradiation and test
  • IEC 60601-1:2005 Medical electrical equipment. General requirements for basic safety and essential performance
    AMENDMENT 1:July 2012
  • IEC 60626-3:2008 Combined flexible materials for electrical insulation. Specifications for individual materials
    AMENDMENT 1:July 2012
  • IEC 60728-3-1:2012 Cable networks for television signals, sound signals and interactive services. Active wideband equipment for cable networks. Methods of measurement of non-linearity for full digital channel load with DVB-C signals
  • IEC 60745-2-3:2006 Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders
    AMENDMENT 2:July 2012
  • IEC 60809:1995 Lamps for road vehicles. Dimensional, electrical and luminous requirements
    AMENDMENT 5:July 2012
  • IEC 60876-1:2012 (Edition 4) Fibre optic interconnecting devices and passive components. Fibre optic spatial switches. Generic specification
  • IEC 60893-3-1:2012 (Edition 3) Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Types of industrial rigid laminated sheets
  • IEC 60917-2-5:2012 Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Cabinet interface dimensions for miscellaneous equipment
  • IEC 60947-4-1:2009 Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters
    AMENDMENT 1:July 2012
  • IEC 60947-4-2:2011 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters
    CORRIGENDUM 1:July 2012
  • IEC/TR 61000-1-6:2012 Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
  • IEC 61169-47:2012 Radio-frequency connectors. Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)
  • IEC 61240:2012 (Edition 2) Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection. General rules
  • IEC 61300-2-33:2012 (Edition 3) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Assembly and disassembly of fibre optic mechanical splices, fibre management systems and closures
  • IEC 61326-1:2012 (Edition 2) Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
  • IEC 61326-2-3:2012 (Edition 2) Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
  • IEC 61326-2-4:2012 (Edition 2) Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
  • IEC 61326-2-6:2012 (Edition 2) Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment
  • IEC 61643-21:2000 Low-voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Performance requirements and testing methods
    AMENDMENT 2:July 2012
  • IEC 61754-26:2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type SF connector family
  • IEC 61788-13:2012 (Edition 2) Superconductivity. AC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • IEC 61915-2:2011 Low-voltage switchgear and controlgear. Device profiles for networked industrial devices. Root device profiles for starters and similar equipment
    CORRIGENDUM 1:July 2012
  • IEC 61987-11:2012 Industrial-process measurement and control. Data structures and elements in process equipment catalogues. List of Properties (LOP) of measuring equipment for electronic data exchange. Generic structures
  • IEC 62035:1999 Discharge lamps (excluding fluorescent lamps). Safety specifications
    AMENDMENT 2:July 2012
  • IEC 62037-3:2012 Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in coaxial connectors
  • IEC 62037-4:2012 Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in coaxial cables
  • IEC 62132-8:2012 Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. IC stripline method
  • IEC 62150-3:2012 Fibre optic active components and devices. Test and measurement procedures. Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces
  • IEC 62282-6-200:2012 (Edition 2) Fuel cell technologies. Micro fuel cell power systems. Performance test methods
  • IEC 62477-1:2012 Safety requirements for power electronic converter systems and equipment. General
  • IEC 62541-7:2012 OPC unified architecture. Profiles
  • IEC 62541-9:2012 OPC unified architecture. Alarms and conditions
  • IEC 62541-10:2012 OPC unified architecture. Programs
  • IEC 62575-2:2012 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality. Guidelines for the use
  • IEC 62585:2012 Electroacoustics. Methods to determine corrections to obtain the free-field response of a sound level meter
  • IEC/TS 62592:2012 (Edition 2) Encoding guidelines for portable multimedia CE products using MP4 file format with AVC video codec and AAC audio codec
  • IEC 62616:2010 Maritime navigation and radiocommunication equipment and systems. Bridge navigational watch alarm system (BNWAS)
    CORRIGENDUM 1:July 2012
  • IEC/TR 62780:2012 Multimedia systems and equipment. Multimedia e-publishing and e-book. Guideline for protection against mechanical stress during distribution of e-books in CD and DVD media
  • IEC/TR 80001-2-1:2012 Application of risk management for IT-networks incorporating medical devices. Step-by-step risk management of medical IT-networks. Practical applications and examples
  • IEC/TR 80001-2-2:2012 Application of risk management for IT-networks incorporating medical devices. Guidance for the disclosure and communication of medical device security needs, risks and controls
  • IEC/TR 80001-2-3:2012 Application of risk management for IT-networks incorporating medical devices. Guidance for wireless networks
  • CISPR 16-1-4:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements
    AMENDMENT 1:July 2012
  • CISPR/TR 16-3:2010 Specification for radio disturbance and immunity measuring apparatus and methods. CISPR technical reports
    AMENDMENT 1:July 2012

IEC/PAS PUBLICATIONS

  • IEC/PAS 60704-2-15:2008 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for household food waste disposers
    CORRIGENDUM 1:July 2012

Published in international.