BRITISH STANDARDS

Issue 41 – August 2012

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATIONS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 8221-1:2012 Code of practice for cleaning and surface repair of buildings. Cleaning of natural stone, brick, terracotta and concrete
    Supersedes BS 8221-1:2000
  • BS 8567:2012 Specification for outdoor electricity meter cupboards

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
    Supersedes BS EN 230:2005 and BS EN 298:2003 which remain current
  • BS EN ISO 536:2012 Paper and board. Determination of grammage
    Supersedes BS EN ISO 536:1997
  • BS EN 572-1:2012 Glass in building. Basic soda lime silicate glass products. Definitions and general physical and mechanical properties
    Supersedes BS EN 572-1:2004
  • BS EN 572-2:2012 Glass in building. Basic soda lime silicate glass products. Float glass
    Supersedes BS EN 572-2:2004
  • BS EN 572-3:2012 Glass in building. Basic soda lime silicate glass products. Polished wired glass
    Supersedes BS EN 572-3:2004
  • BS EN 572-4:2012 Glass in building. Basic soda lime silicate glass products. Drawn sheet glass
    Supersedes BS EN 572-4:2004
  • BS EN 572-5:2012 Glass in building. Basic soda lime silicate glass products. Patterned glass
    Supersedes BS EN 572-5:2004
  • BS EN 572-6:2012 Glass in building. Basic soda lime silicate glass products. Wired patterned glass
    Supersedes BS EN 572-6:2004
  • BS EN 572-7:2012 Glass in building. Basic soda lime silicate glass products. Wired or unwired channel shaped glass
    Supersedes BS EN 572-7:2004
  • BS EN 572-8:2012 Glass in building. Basic soda lime silicate glass products. Supplied and final cut sizes
    Supersedes BS EN 572-8:2004
  • BS EN 795:2012 Personal fall protection equipment. Anchor devices
    Supersedes BS EN 795:1997
  • BS EN 927-3:2012 Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test
    Supersedes BS EN 927-3:2006
  • BS EN 1363-1:2012 Fire resistance tests. General requirements
    Supersedes BS EN 1363-1:1999
  • BS EN 1645-1:2012 Leisure accommodation vehicles. Caravans. Habitation requirements relating to health and safety
    Supersedes BS EN 1645-1:2004+A1:2008
  • BS EN 1646-1:2012 Leisure accommodation vehicles. Motor caravans. Habitation requirements relating to health and safety
    Supersedes BS EN 1646-1:2004+A1:2008
  • BS EN 1647:2012 Leisure accommodation vehicles. Caravan holiday homes. Habitation requirements relating to health and safety
    Supersedes BS EN 1647:2004+A1:2008
  • BS EN 1648-1:2012 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans
    Supersedes BS EN 1648-1:2004
  • BS EN 1648-2:2012 Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans
    Supersedes BS EN 1648-2:2005
  • BS EN 2591-307:2012 Aerospace series. Elements of electrical and optical connection. Test methods. Salt mist
    Supersedes BS EN 2591-307:1998
  • BS EN 2591-402:2012 Aerospace series. Elements of electrical and optical connection. Test methods. Shock
    Supersedes BS EN 2591-402:1998
  • BS EN ISO 2739:2012 Sintered metal bushings. Determination of radial crushing strength
    Supersedes BS EN ISO 2739:2010
  • BS EN 3456:2012 Aerospace series. Titanium alloy TI-P64001 (Ti- 6Al-4V). Annealed. Sheet and strip, hot rolled. A ? 6 mm
    Supersedes BS EN 3456:2009
  • BS EN 3745-405:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/High temperature bend test
  • BS EN 3745-515:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Buffer insertion force
  • BS EN 3745-516:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Severe cable bend test
  • BS EN 3745-517:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Cable tie clamping test
  • BS EN ISO 4254-12:2012 Agricultural machinery. Safety. Rotary disc and drum mowers and flail mowers
    Supersedes BS EN 745:1999+A1:2009
  • BS EN ISO 4404-1:2012 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Water-containing fluids
    Supersedes BS EN ISO 4404-1:2006
  • BS EN ISO 6498:2012 Animal feeding stuffs. Guidelines for sample preparation
    Supersedes BS 5766-10:1999
  • BS EN ISO 6876:2012 Dentistry. Root canal sealing materials
    Supersedes BS EN ISO 6876:2002
  • BS EN ISO 6927:2012 Buildings and civil engineering works. Sealants. Vocabulary
    Supersedes BS EN 26927:1991
  • BS EN ISO 10209:2012 Technical product documentation. Vocabulary. Terms relating to technical drawings, product definition and related documentation
    Supersedes BS EN ISO 10209-2:1996 and BS ISO 10209-1:1992
  • BS EN ISO 10870:2012 Water quality. Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters
    Supersedes BS EN 27828:1994, BS EN 28265:1994 and BS EN ISO 9391:1995
  • BS EN ISO 11833-1:2012 Plastics. Unplasticized poly(vinyl chloride) sheets. Types, dimensions and characteristics. Sheets of thickness not less than 1 mm
    Supersedes BS EN ISO 11833-1:2007
  • BS EN ISO 11987:2012 Ophthalmic optics. Contact lenses. Determination of shelf-life
    Supersedes BS EN ISO 11987:1998
  • BS EN 12405-2:2012 Gas meters. Conversion devices. Energy conversion
  • BS EN 13012:2012 Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers
    Supersedes BS EN 13012:2001
  • BS EN 13480-1:2012 Metallic industrial piping. General
    Supersedes BS EN 13480-1:2002+A2:2008
  • BS EN 13480-2:2012 Metallic industrial piping. Materials
    Supersedes BS EN 13480-2:2002+A2:2010
  • BS EN 13480-6:2012 Metallic industrial piping. Additional requirements for buried piping
    Supersedes BS EN 13480-6:2004
  • BS EN ISO 13504:2012 Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment
  • BS EN 13583:2012 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance
    Supersedes BS EN 13583:2001
  • BS EN ISO 13585:2012 Brazing. Qualification test of brazers and brazing operators
    Supersedes BS EN 13133:2000
  • BS EN ISO 13632:2012 Binders for paints and varnishes. Rosin. Sampling and sample preparation for colour measurement
  • BS EN 14362-3:2012 Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
  • BS EN ISO 14403-1:2012 Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA). Method using flow injection analysis (FIA)
  • BS EN ISO 14403-2:2012 Water quality. Determination of total cyanide and free cyanide using flow analysis (FIA and CFA). Method using continuous flow analysis (CFA)
    Supersedes BS EN ISO 14403:2002
  • BS EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
    Supersedes BS EN 14597:2005
  • BS EN ISO 14971:2012 Medical devices. Application of risk management to medical devices
    Supersedes BS EN ISO 14971:2009
  • BS EN 15502-1:2012 Gas-fired heating boilers. General requirements and tests
  • BS EN ISO 15614-13:2012 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Upset (resistance butt) and flash welding
    Supersedes BS EN ISO 15614-13:2005
  • BS EN 15772:2012 Textile floor coverings. Minimum requirements for needled floor coverings for single usage in events of limited duration
  • BS EN 15861:2012 Food processing machinery. Smokehouses. Safety and hygiene requirements
  • BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Method using light-scattering detection
  • BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
  • BS EN 16056:2012 Influence of metallic materials on water intended for human consumption. Method to evaluate the passive behaviour of stainless steels
  • BS EN 16161:2012 Water quality. Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
  • BS EN 16247-1:2012 Energy audits. General requirements
  • BS EN 16277:2012 Animal feeding stuffs. Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65% nitric acid and 30% hydrogen peroxide)
  • BS EN 16278:2012 Animal feeding stuffs. Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
  • BS EN 16279:2012 Animal feeding stuffs. Determination of fluoride content after hydrochloric acid treatment by ion-sensitive electrode method (ISE)
  • BS EN 16345:2012 (BS 2000-603:2012) Bitumen and bituminous binders. Determination of efflux time of bituminous emulsions using the Redwood No. II Viscometer
  • BS EN ISO/IEC 17024:2012 Conformity assessment. General requirements for bodies operating certification of persons
    Supersedes BS EN ISO/IEC 17024:2003
  • BS EN ISO 25178-3:2012 Geometrical product specifications (GPS). Surface texture: Areal. Specification operators
  • BS EN ISO 26082-2:2012 Leather. Physical and mechanical test methods for the determination of soiling. Tumbling method
  • BS EN 50293:2012 Road traffic signal systems. Electromagnetic compatibility
    Supersedes BS EN 50293:2001
  • BS EN 50411-3-1:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Fibre management system, splice wall box, for category C & G
  • BS EN 60317-0-7:2012 Specifications for particular types of winding wires. General requirements. Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm
  • BS EN 60317-56:2012 Specifications for particular types of winding wires. Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire, with nominal conductor diameter of 0,040 mm to 1,600 mm, class 180
  • BS EN 60512-16-21:2012 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16u. Whisker test via the application of external mechanical stresses
  • BS EN 60705:2012 Household microwave ovens. Methods for measuring performance
    Supersedes BS EN 60705:1999 which remains current
  • BS EN 60717:2012 Method for the determination of the space required by capacitors and resistors with unidirectional terminations
    Supersedes BS 6303:1982
  • BS EN 60811-100:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General
    Supersedes BS EN 60811-1-1:1995, BS EN 60811-1-2:1995, BS EN 60811-1-3:1995, BS EN 60811-4:1995, BS EN 60811-2-1:1998, BS EN 60811-3-1:1995, BS EN 60811-3-2:1995, BS EN 60811-4-1:2004, BS EN 60811-4-2:2004 and BS EN 60811-5-1:2000
  • BS EN 60811-201:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of insulation thickness
    Supersedes BS EN 60811-1-1:1995
  • BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath
    Supersedes BS EN 60811-1-1:1995
  • BS EN 60811-203:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of overall dimensions
    Supersedes BS EN 60811-1-1:1995
  • BS EN 60811-301:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Electrical tests. Measurement of the permittivity at 23ºC of filling compounds
    Supersedes BS EN 60811-5-1:2000
  • BS EN 60811-302:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Electrical tests. Measurement of the D.C. resistivity at 23ºC and 100ºC of filling compounds
    Supersedes BS EN 60811-5-1:2000
  • BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
    Supersedes BS EN 60811-1-2:1995
  • BS EN 60811-402:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Water absorption tests
    Supersedes BS EN 60811-1-3:1995
  • BS EN 60811-403:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Ozone resistance test on cross-linked compounds
    Supersedes BS EN 60811-2-1:1998
  • BS EN 60811-404:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Mineral oil immersion tests for sheaths
    Supersedes BS EN 60811-2-1:1998
  • BS EN 60811-405:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal stability test for PVC insulations and PVC sheaths
    Supersedes BS EN 60811-3-2:1995
  • BS EN 60811-406:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds
    Supersedes BS EN 60811-4-1:2004
  • BS EN 60811-407:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
    Supersedes BS EN 60811-4-2:2004
  • BS EN 60811-408:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Long-term stability test of polyethylene and polypropylene compounds
    Supersedes BS EN 60811-4-2:2004
  • BS EN 60811-409:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths
    Supersedes BS EN 60811-3-2:1995
  • BS EN 60811-410:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
    Supersedes BS EN 60811-4-2:2004
  • BS EN 60811-411:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Low-temperature brittleness of filling compounds
    Supersedes BS EN 60811-5-1:2000
  • BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
    Supersedes BS EN 60811-1-2:1995
  • BS EN 60811-501:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Tests for determining the mechanical properties of insulating and sheathing compounds
    Supersedes BS EN 60811-1-1:1995
  • BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
    Supersedes BS EN 60811-1-3:1995
  • BS EN 60811-503:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for sheaths
    Supersedes BS EN 60811-1-3:1995
  • BS EN 60811-504:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Bending tests at low temperature for insulation and sheaths
    Supersedes BS EN 60811-1-4:1995
  • BS EN 60811-505:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Elongation at low temperature for insulations and sheaths
    Supersedes BS EN 60811-1-4:1995
  • BS EN 60811-506:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Impact test at low temperature for insulations and sheaths
    Supersedes BS EN 60811-1-4:1995
  • BS EN 60811-507:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Hot set test for cross-linked materials
    Supersedes BS EN 60811-2-1:1998
  • BS EN 60811-508:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Pressure test at high temperature for insulation and sheaths
    Supersedes BS EN 60811-3-1:1995
  • BS EN 60811-509:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)
    Supersedes BS EN 60811-3-1:1995
  • BS EN 60811-510:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after thermal ageing in air
    Supersedes BS EN 60811-4-2:2004
  • BS EN 60811-511:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Measurement of the melt flow index of polyethylene compounds
    Supersedes BS EN 60811-4-1:2004
  • BS EN 60811-512:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature
    Supersedes BS EN 60811-4-2:2004
  • BS EN 60811-513:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning
    Supersedes BS EN 60811-4-2:2004
  • BS EN 60811-601:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of the drop point of filling compounds
    Supersedes BS EN 60811-5-1:2000
  • BS EN 60811-602:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Separation of oil in filling compounds
    Supersedes BS EN 60811-5-1:2000
  • BS EN 60811-603:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of total acid number of filling compounds
    Supersedes BS EN 60811-5-1:2000
  • BS EN 60811-604:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of absence of corrosive components in filling compounds
    Supersedes BS EN 60811-5-1:2000
  • BS EN 60811-605:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds
    Supersedes BS EN 60811-4-1:2004
  • BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
    Supersedes BS EN 60811-1-3:1995
  • BS EN 60811-607:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Test for the assessment of carbon black dispersion in polyethylene and polypropylene
    Supersedes BS EN 60811-4-1:2004
  • BS EN 60947-4-2:2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductor motor controllers and starters
    Supersedes BS EN 60947-4-2:2000 which remains current
  • BS EN 61010-2-033:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage
  • BS EN 61076-4-116:2012 Connectors for electronic equipment. Product requirements. Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
  • BS EN 61158-3-21:2012 Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 21 elements
    Together with BS EN 61158-4-21:2012, BS EN 61158-5-21:2012 and BS EN 61158-6-21:2012 it supersedes DD IEC/PAS 62573:2008 which is withdrawn
  • BS EN 61158-6-2:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 2 elements
    Supersedes BS EN 61158-6-2:2008
  • BS EN 61158-6-3:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 3 elements
    Supersedes BS EN 61158-6-3:2008
  • BS EN 61158-6-9:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 9 elements
    Supersedes BS EN 61158-6-9:2008
  • BS EN 61158-6-10:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 10 elements
    Supersedes BS EN 61158-6-10:2008
  • BS EN 61158-6-12:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 12 elements
    Supersedes BS EN 61158-6-12:2008
  • BS EN 61158-6-14:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 14 elements
    Supersedes BS EN 61158-6-14:2008
  • BS EN 61158-6-15:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 15 elements
    Supersedes BS EN 61158-6-15:2008
  • BS EN 61158-6-18:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 18 elements
    Supersedes BS EN 61158-6-18:2008
  • BS EN 61158-6-19:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 19 elements
    Supersedes BS EN 61158-6-19:2008
  • BS EN 61158-6-20:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 20 elements
    Supersedes BS EN 61158-6-20:2008
  • BS EN 61158-6-21:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 21 elements
    Together with BS EN 61158-3-21:2012, BS EN 61158-4-21:2012 and BS EN 61158-5-21:2012, it supersedes DD IEC/PAS 62573:2008 which is withdrawn
  • BS EN 61158-6-22:2012 Industrial communication networks. Fieldbus specifications. Application layer protocol specification. Type 22 elements
  • BS EN 61754-28:2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type LF3 connector family
  • BS EN 61754-29:2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type BLINK connector series
  • BS EN 61757-1:2012 Fibre optic sensors. Generic specification
    Supersedes BS EN 61757-1:1999
  • BS EN ISO 80601-2-55:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
    Supersedes BS EN ISO 21647:2009

BS ENs IMPLEMENTED BY AMENDMENT

  • BS EN ISO 81060-1:2012 Non-invasive sphygmomanometers. Requirements and test methods for non-automated measurement type
    Implementation of European Standard EN ISO 81060-1 by amendment to BS ISO 81060- 1:2007

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 1219-1:2012 Fluid power systems and components. Graphical symbols and circuit diagrams. Graphical symbols for conventional use and data-processing applications
    Supersedes BS 2917-1:1993
  • BS ISO 3387:2012 Rubber. Determination of crystallization effects by hardness measurements
    Supersedes BS 903-A63:1995
  • BS ISO 3528:2012 Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
  • BS ISO 4162:2012 Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
  • BS ISO 6356:2012 Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test
    Supersedes BS ISO 6356:2000
  • BS ISO 7000:2012 Graphical symbols for use on equipment. Registered symbols
    Supersedes BS ISO 7000:2004
  • BS ISO/IEC 10967-1:2012 Information technology. Language independent arithmetic. Integer and floating point arithmetic
    Supersedes BS ISO/IEC 10967-1:1994
  • BS ISO 10976:2012 Refrigerated light hydrocarbon fluids. Measurement of cargoes on board LNG carriers
  • BS ISO 11352:2012 Water quality. Estimation of measurement uncertainty based on validation and quality control data
  • BS ISO 11665-1:2012 Measurement of radioactivity in the environment. Air: radon-222. Origins of radon and its short-lived decay products and associated measurement methods
  • BS ISO 11665-2:2012 Measurement of radioactivity in the environment. Air: radon-222. Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
  • BS ISO 11665-3:2012 Measurement of radioactivity in the environment. Air: radon-222. Spot measurement method of the potential alpha energy concentration of its short-lived decay products
  • BS ISO 11665-4:2012 Measurement of radioactivity in the environment. Air: radon-222. Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
  • BS ISO 11665-6:2012 Measurement of radioactivity in the environment. Air: radon-222. Spot measurement method of the activity concentration
  • BS ISO 11665-7:2012 Measurement of radioactivity in the environment. Air: radon-222. Accumulation method for estimating surface exhalation rate
  • BS ISO 12219-1:2012 Indoor air of road vehicles. Whole vehicle test chamber. Specification and method for the determination of volatile organic compounds in cabin interiors
  • BS ISO 12242:2012 Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid
  • BS ISO 12488-1:2012 Cranes. Tolerances for wheels and travel and traversing tracks. General
    Supersedes BS ISO 12488-1:2005
  • BS ISO/IEC 12785-2:2011 Information technology. Learning, education, and training. Content packaging. XML binding
  • BS ISO 13074:2012 Analogue quartz clocks. Fitting dimensions of movements to hands
  • BS ISO 13099-2:2012 Colloidal systems. Methods for zeta-potential determination. Optical methods
  • BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
  • BS ISO 13470:2012 Trenchless applications of ductile iron pipes systems. Product design and installation
  • BS ISO 14289-1:2012 Document management applications. Electronic document file format enhancement for accessibility. Use of ISO 32000-1 (PDF/UA-1)
  • BS ISO 14627:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method
  • BS ISO 14628:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method
  • BS ISO 14802:2012 Corrosion of metals and alloys. Guidelines for applying statistics to analysis of corrosion data
  • BS ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
    Supersedes BS ISO 15072:1999
  • BS ISO 15241:2012 Rolling bearings. Symbols for physical quantities
    Supersedes BS ISO 15241:2001
  • BS ISO 15917:2012 Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials
    Supersedes BS ISO 15917:2007
  • BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
    Supersedes BS ISO 16014-1:2003
  • BS ISO 16014-2:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method
    Supersedes BS ISO 16014-2:2003
  • BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
    Supersedes BS ISO 16014-3:2003
  • BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
    Supersedes BS ISO 16014-4:2003
  • BS ISO 17101-1:2012 Agricultural machinery. Thrown-object test and acceptance criteria. Rotary mowers
    Together with BS ISO 17101-2:2012, it supersedes BS ISO 17101:2004, which is withdrawn
  • BS ISO 17101-2:2012 Agricultural machinery. Thrown-object test and acceptance criteria. Flail mowers
    Together with BS ISO 17101-1:2012, it supersedes BS ISO 17101:2004, which is withdrawn
  • BS ISO 17752:2012 Corrosion of metals and alloys. Procedures to determine runoff rates of metals from materials as a result of atmospheric corrosion
  • BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
    Supersedes BS ISO 18898:2006
  • BS ISO 19144-2:2012 Geographic information. Classification systems. Land Cover Meta Language (LCML)
  • BS ISO 21940-21:2012 Mechanical vibration. Rotor balancing. Description and evaluation of balancing machines
    Supersedes BS ISO 2953:1999
  • BS ISO 22262-1:2012 Air quality. Bulk materials. Sampling and qualitative determination of asbestos in commercial bulk materials
  • BS ISO 22641:2012 Space data and information transfer systems. TM (telemetry) synchronization and channel coding
  • Supersedes BS ISO 22641:2005
  • BS ISO 26262-10:2012 Road vehicles. Functional safety. Guideline on ISO 26262
  • BS ISO/IEC 27032:2012 Information technology. Security techniques. Guidelines for cybersecurity
  • BS ISO/IEC 27033-2:2012 Information technology. Security techniques. Guidelines for the design and implementation of network security
    Supersedes BS ISO/IEC 18028-2:2006
  • BS ISO/IEC 29192-1:2012 Information technology. Security techniques. Lightweight cryptography. General
  • BS ISO/IEC/IEEE 80005-1:2012 Utility connections in port. High Voltage Shore Connection (HVSC) Systems. General requirements

PUBLISHED DOCUMENTS

  • PD 8010-4:2012 Pipeline systems. Steel pipelines on land and subsea pipelines. Code of practice for integrity management
  • PD ISO/TS 9241-411:2012 Ergonomics of human-system interaction. Evaluation methods for the design of physical input devices
    Together with BS EN ISO 9241-400:2007, BS EN ISO 9241-410:2008, BS EN ISO 9241-420:2011 and BS EN ISO 9241-421 (when published), it partially supersedes BS EN ISO 9241-4:1998 and BS EN ISO 9241-9:2000
  • PD ISO/TS 11669:2012 Translation projects. General guidance
  • PD CEN ISO/TS 15011-6:2012 Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Procedure for quantitative determination of fume and gases from resistance spot welding
  • PD CEN/TS 15480-2:2012 Identification card systems. European Citizen Card. Logical data structures and security services
    Supersedes DD CEN/TS 15480-2:2007
  • PD CEN/TS 15862:2012 Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
  • PD CEN/TS 15863:2012 Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions
  • PD CEN/TS 15864:2012 Characterisation of waste. Leaching behaviour test for basic characterisation. Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
  • PD ISO/TR 16224:2012 Technical aspects of nut design
  • PD CEN/TS 16358:2012 Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of air inclusions/microfoam in coating films
  • PD CEN/TS 16359:2012 Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings
  • PD CEN/TS 16360:2012 Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of film extensibility by indentation of a coating on a wooden substrate
  • PD CEN/TR 16364:2012 Influence of materials on water intended for human consumption. Influence due to migration. Prediction of migration from organic materials using mathematical modelling
  • PD ISO/TR 16377:2012 Further clarification of ISO 28580
  • PD CLC/TR 50579:2012 Electricity metering equipment (A.C.). Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz-150 kHz
  • PD IEC/TR 60725:2012 Consideration of reference impedances and public supply network impedances for use in determining disturbance characteristics of electrical equipment having a rated current ? 75 A per phase
    Supersedes PD IEC/TR 60725:2005
  • PD IEC/TR 61000-1-6:2012 Electromagnetic compatibility (EMC). General. Guide to the assessment of measurement uncertainty
  • PD IEC/TR 61292-4:2010 Optical amplifier technical reports. Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers
  • PD IEC/TS 62239-1:2012 Process management for avionics. Management plan. Preparation and maintenance of an electronic components management plan
    Supersedes DD IEC/TS 62239:2008
  • PD IEC/TR 62627-04:2012 Fibre optic interconnecting devices and passive components. Example of uncertainty calculation: Measurement of the attenuation of an optical connector
  • PD IEC/TR 62778:2012 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires
  • PD ISO/TS 81346-3:2012 Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations. Application rules for a reference designation system
    Supersedes DD ISO/TS 16952-1:2007

CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 7980:2003+A1:2012 Vehicle lifts. Installation, maintenance, thorough examination and safe use. Code of practice
    AMENDMENT 1
  • BS 8221-1:2012 Code of practice for cleaning and surface repair of buildings. Cleaning of natural stone, brick, terracotta and concrete
    CORRIGENDUM 1
  • BS 8437:2005+A1:2012 Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace
    AMENDMENT 1
  • BS 8904:2011 Guidance for community sustainable development
    CORRIGENDUM 1
  • BS EN 859:2007+A2:2012 Safety of woodworking machines. Hand fed surface planing machines
    AMENDMENT 2
  • BS EN 860:2007+A2:2012 Safety of woodworking machines. One side thickness planning machines
    AMENDMENT 2
  • BS EN 861:2007+A2:2012 Safety of woodworking machines. Surface planing and thicknessing machines
    AMENDMENT 2
  • BS EN 997:2012 WC pans and WC suites with integral trap
    CORRIGENDUM 1
  • BS EN ISO 1628-1:2009+A1:2012 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles
    AMENDMENT 1
  • BS EN 1811:2011 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
    CORRIGENDUM 1
  • BS EN ISO 5359:2008+A1:2011 Low-pressure hose assemblies for use with medical gases
    AMENDMENT 1
  • BS EN ISO 5832-3:2012 Implants for surgery. Metallic materials. Wrought titanium 6-aluminium 4-vanadium alloy
    CORRIGENDUM 1
  • BS EN 12999:2011+A1:2012 Cranes. Loader cranes
    AMENDMENT 1
  • BS EN ISO 15223-1:2012 Medical devices. Symbols to be used with medical device labels, labelling and information to be supplied. General requirements
    CORRIGENDUM 1
  • BS EN ISO 17076-1:2012 Leather. Determination of abrasion resistance. Taber method
    CORRIGENDUM 2
  • BS EN ISO 17076-2:2011 Leather. Determination of abrasion resistance. Martindale ball plate method
    CORRIGENDUM 1
  • BS EN 50291-1:2010+A1:2012 Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements
    AMENDMENT 1
  • BS EN 60335-2-2:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for vacuum cleaners and water-suction cleaning appliances
    CORRIGENDUM 2
  • BS EN 60335-2-3:2002+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for electric irons
    CORRIGENDUM 2
  • BS EN 60335-2-7:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for washing machines
    CORRIGENDUM 4
  • BS EN 60335-2-9:2003+A13:2010 Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances
    CORRIGENDUM 3
  • BS EN 60335-2-25:2002+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for microwave ovens, including combination microwave ovens
    CORRIGENDUM 1
  • BS EN 60335-2-52:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for oral hygiene appliances
    CORRIGENDUM 1
  • BS EN ISO 81060-1:2012 Non-invasive sphygmomanometers. Requirements and test methods for non-automated measurement type
    CORRIGENDUM 1
  • BS ISO 10100:2001+A1:2012 Hydraulic fluid power. Cylinders. Acceptance tests
    AMENDMENT 1
  • BS ISO/IEC 10373-6:2011+A1:2012 Identification cards. Test methods. Proximity cards
    AMENDMENT 1
  • BS ISO/IEC 14888-3:2006+A2:2012 Information technology. Security techniques. Digital signatures with appendix. Discrete logarithm based mechanisms
    AMENDMENT 2
  • PD 6695-2:2008+A1:2012 Recommendations for the design of bridges to BS EN 1993
    AMENDMENT 1
  • PD 6696-2:2007+A1:2012 Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2
    AMENDMENT 1
  • BS 2A 173:1962+A7:2012 Specification for 100º Countersunk head steel bolts (Unified threads), cadmium plated, for aircraft
    AMENDMENT 7
  • BS 4A 170:1999+A1:2012 Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)
    AMENDMENT 1
  • BS 3HR 2:2010+A2:2012 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
    AMENDMENT 2
  • BS SP 57 and 58:1955+A3:2011 Specifications for Rivet burrs for aircraft
    CORRIGENDUM 1
  • BS SP 94:1964+A2:2012 Bronze oil-retaining bushes and thrust washers. For aircraft
    AMENDMENT 2
  • BS 2SP 101-104:1956+A2:2012 Specifications for Turnbarrels, tension rods and swaged cable-end connections (Unified threads), cadmium plated, for aircraft
    CORRIGENDUM 1
  • NA to BS EN 1999-1-3:2007+A1:2011 UK National Annex to Eurocode 9: Design of aluminium structures. Structures susceptible to fatigue
    AMENDMENT 1
  • NA+A1:2012 to BS EN 1993-2:2006 UK National Annex to Eurocode 3: Design of structures. Steel bridges
    AMENDMENT 1
  • NA+A1:2012 to BS EN 1993-5:2007 UK National Annex to Eurocode 3: Design of steel structures. Piling
    AMENDMENT 1

BRITISH STANDARDS WITHDRAWN

  • BS 2917-1:1993 (ISO 1219-1:1991) Graphic symbols and circuit diagrams for fluid power systems and components. Specification for graphic symbols
    Superseded by BS ISO 1219-1:2012
  • BS 5766-10:1999 (ISO 6498:1998) Methods for analysis of animal feeding stuffs. Methods for analysis of animal feeding stuffs. Preparation of test samples
    Superseded by BS EN ISO 6498:2012
  • BS 6303:1982 (IEC 60717:1981) Method for determination of the space required by capacitors and resistors with unidirectional terminations
    Superseded by BS EN 60717:2012
  • BIP 2006:2003 Auditing the ISO 19011 Way
    This document has been withdrawn as it is no longer relevant
  • BS EN 745:1999+A1:2009 Agricultural machinery. Rotary mowers and flail-mowers. Safety
    Superseded by BS EN ISO 4254-12:2012
  • BS EN 954-1:1997 Safety of machinery. Safety related parts of control systems. General principles for design
    Superseded by BS EN ISO 13849-1:2006
  • BS EN 1060-1:1995+A2:2009 Non-invasive sphygmomanometers. General requirements
    Superseded by BS EN ISO 81060-1:2012
  • BS EN 1060-2:1995+A1:2009 Non-invasive sphygmomanometers. Supplementary requirements for mechanical sphygmomanometers
    Superseded by BS EN ISO 81060-1:2012
  • BS EN ISO 9391:1995 (BS 6068-5.15:1995) Water quality. Sampling in deep water for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers
    Superseded by BS EN ISO 10870:2012
  • BS EN ISO 10209-2:1996 (BS 308-1.7:1996) Technical product documentation. Vocabulary. Terms relating to projection methods
    Superseded by BS EN ISO 10209:2012
  • BS EN 13133:2000 Brazing. Brazer approval
    Superseded by BS EN ISO 13585:2012
  • BS EN ISO 14403:2002 (BS 6068-2.75:2002) Water quality. Determination of total cyanide and free cyanide by continuous flow analysis
    Superseded by BS EN ISO 14403-2:2012
  • DD CEN/TS 15480-2:2007 Identification card systems. European Citizen Card. Logical data structures and card services
    Superseded by PD CEN/TS 15480-2:2012
  • BS EN ISO 21647:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
    Superseded by BS EN ISO 80601-2-55:2011
  • BS EN 26927:1991 (ISO 6927:1981) Building construction. Jointing products. Sealants. Vocabulary
    Superseded by BS EN ISO 6927:2012
  • BS EN 27828:1994 (ISO 7828:1985) Water quality. Methods for biological testing. Methods of biological sampling: guidance on hand net sampling of aquatic benthic macroinvertebrates
    Superseded by BS EN ISO 10870:2012
  • BS EN 28265:1994 (ISO 8265:1988) Water quality. Biological methods. Methods of biological sampling: guidance on the design and use of quantitative samplers for benthic macro-invertebrates on stony substrata
    Superseded by BS EN ISO 10870:2012
  • BS EN 55011:2007 Industrial, scientific and medical (ISM) radiofrequency Equipment. Electromagnetic disturbance characteristics. Limits and methods of measurement
    Superseded by BS EN 55011:2009
  • BS EN 60601-2-20:1997 (BS 5724-2.120:1997) Medical electrical equipment. Particular requirements for safety. Specification for transport incubators
    Superseded by BS EN 60601-2-20:2009
  • BS EN 60811-1-1:1995 Insulating and sheathing materials of electric cables. Common test methods. General application. Measurement of thickness and overall dimensions. Tests for determining the mechanical properties. Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
    Superseded by BS EN 60811-100:2012, BS EN 60811-201:2012, BS EN 60811-202:2012, BS EN 60811-203:2012 and BS EN 60811-501:2012
  • BS EN 60811-1-2:1995 Insulating and sheathing materials of electric cables. Common test methods. General application. Thermal ageing methods
    Superseded by BS EN 60811-100:2012, BS EN 60811-401:2012 and BS EN 60811-412:2012
  • BS EN 60811-1-3:1995 Insulating and sheathing materials of electric cables. Common test methods. General application. Methods for determining the density. Water absorption tests. Shrinkage test.
    Superseded by BS EN 60811-100:2012, BS EN 60811-402:2012, BS EN 60811-502:2012, BS EN 60811-503:2012 and BS EN 60811-606:2012
  • BS EN 60811-1-4:1995 Insulating and sheathing materials of electric cables. Common test methods. General application. Tests at low temperature
    Superseded by BS EN 60811-100:2012, BS EN 60811-504:2012, BS EN 60811-505:2012 and BS EN 60811-506:2012
  • BS EN 60811-2-1:1998 Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds. Methods specific to elastomeric compounds. Ozone
    Superseded by BS EN 60811-100:2012, BS EN 60811-403:2012, BS EN 60811-404:2012 and BS EN 60811-507:2012
  • BS EN 60811-3-1:1995 Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Pressure test at high temperature. Tests for resistance to cracking
    Superseded by BS EN 60811-100:2012, BS EN 60811-508:2012 and BS EN 60811-509:2012
  • BS EN 60811-3-2:1995 Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Loss of mass test. Thermal stability test
    Superseded by BS EN 60811-100:2012, BS EN 60811-405:2012 and BS EN 60811-409:2012
  • BS EN 60811-4-1:2004 Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polypropylene and polypropylene compounds. Resistance to environmental
    Superseded by BS EN 60811-100:2012, BS EN 60811-406:2012, BS EN 60811-511:2012, BS EN 60811-605:2012 and BS EN 60811-607:2012
  • BS EN 60811-4-2:2004 Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature. Wrapping test after conditioning at elevated temperature. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalyzed oxidative degradation
    Superseded by BS EN 60811-100:2012, BS EN 60811-407:2012, BS EN 60811-408:2012, BS EN 60811-410:2012, BS EN 60811-510:2012, BS EN 60811-512:2012 and BS EN 60811-513:2012
  • BS EN 60811-5-1:2000 Insulating and sheathing materials of electric and optical fibre cables. Common test methods. Methods specific to filling compounds. Drop point. Separation of oil. Lower temperature
    Superseded by BS EN 60811-100:2012, BS EN 60811-301:2012, BS EN 60811-302:2012, BS EN 60811-411:2012, BS EN 60811-601:2012, BS EN 60811-602:2012, BS EN 60811-603:2012 and BS EN 60811-604:2012
  • BS EN 60893-3-5:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated
    Superseded by BS EN 60893-3-5:2004+A1:2009
  • BS ISO 2953:1999 Mechanical vibration. Balancing machines. Description and evaluation
    Superseded by BS ISO 21940-21:2012
  • BS ISO 10209-1:1992 Technical product documentation. Vocabulary. Terms relating to technical drawings: General and types of drawings
    Superseded by BS EN ISO 10209:2012
  • DD ISO/TS 16952-1:2007 Technical product documentation. Reference designation system. General application rules
    Superseded by PD ISO/TS 81346-3:2012
  • BS ISO 17101:2004 Agricultural machinery. Rotary and flail mowers. Thrown-object test and acceptance criteria
    Together with BS ISO 17101-2:2012 it supersedes BS ISO 17101:2004 which is withdrawn
  • BS ISO/IEC 18028-2:2006 Information technology. Security techniques. IT network security. Network security architecture
    Superseded by BS ISO/IEC 27033-2:2012

Published in international.