IEC PUBLICATIONS

You can now purchase PDFs of IEC Standards from Standards New Zealand ā€“ please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. IEC Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel.

  • IEC 60061-2:1969 Lamp caps and holders together with gauges for the control of interchangeability and safety. Lampholders
    AMENDMENT 40:April 2010
  • IEC 60061-3:1993 Lamp caps and holders together with gauges for the control of interchangeability and safety. Gauges
    AMENDMENT 41:February 2010
  • IEC 60068-2-21:2006 Environmental testing. Tests. Test U. Robustness of terminations and integral mounting devices
    CORRIGENDUM 1:January 2012
  • IEC 60079-11:2011 Explosive atmospheres. Equipment protection by intrinsic safety ā€œiā€
    CORRIGENDUM 1:January 2012
  • IEC 60118-15:2012 Electroacoustics. Hearing aids. Methods for characterising signal processing in hearing aids with a speech-like signal
  • IEC 60296:2012 (Edition 4) Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear
  • IEC 60335-2-69:2012 (Edition 4) Household and similar electrical appliances. Safety. Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
  • IEC 60335-2-79:2012 (Edition 3) Household and similar electrical appliances. Safety. Particular requirements for high pressure cleaners and steam cleaners
  • IEC 60335-2-107:2012 Household and similar electrical appliances. Safety. Particular requirements for robotic battery powered electrical lawnmowers
  • IEC/TR 60344:2007 Calculation of D.C. resistance of plain and coated copper conductors of low-frequency cables and wires. Application guide
    CORRIGENDUM 1:February 2012
  • IEC 60352-5:2012 (Edition 4) Solderless connections. Press-in connections. General requirements, test methods and practical guidance
  • IEC 60364-7-709:2007 Low-voltage electrical installations. Requirements for special installations or locations. Marinas and similar locations
    AMENDMENT 1:February 2012
  • IEC 60436:2004 Electric dishwashers for household use. Methods for measuring the performance
    AMENDMENT 2:February 2012
  • IEC 60512-1-100:2012 (Edition 3) Connectors for electronic equipment. Tests and measurements. General. Applicable publications
  • IEC 60601-2-47:2012 (Edition 2) Medical electrical equipment. Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
  • IEC 60645-1:2012 (Edition 3) Electroacoustics. Audiometric equipment. Equipment for pure-tone audiometry
  • IEC 60794-1-1:2011 Optical fibre cables. Generic specification. General
    CORRIGENDUM 1:January 2012
  • IEC 60947-3:2008 Low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units
    AMENDMENT 1:February 2012
  • IEC 61056-1:2012 (Edition 3) General purpose lead-acid batteries (valve regulated types). General requirements, functional characteristics. Methods of test
  • IEC 61056-2:2012 (Edition 3) General purpose lead-acid batteries (valve regulated types). Dimensions, terminals and marking
  • IEC 61121:2012 (Edition 4) Tumble dryers for household use. Methods for measuring the performance
  • IEC 61181:2007 Mineral oil-filled electrical equipment. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment
    AMENDMENT 1:February 2012
  • IEC 61196-8-1:2012 Coaxial communication cables. Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric
  • IEC 61196-8:2012 Coaxial communication cables. Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric
  • IEC 61300-3-33:2012 (Edition 2) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Withdrawal force from a resilient alignment sleeve using gauge pins
  • IEC 61378-1:2011 Converter transformers. Transformers for industrial applications
    CORRIGENDUM 1:January 2012
  • IEC 61439-3:2012 Low-voltage switchgear and controlgear assemblies. Distribution boards intended to be operated by ordinary persons (DBO)
  • IEC 61747-6-2:2011 Liquid crystal display devices. Measuring methods for liquid crystal display modules. Reflective type
    CORRIGENDUM 1:January 2012
  • IEC 61753-087-6:2012 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O. Uncontrolled environment
  • IEC 61755-3-6:2006 Fibre optic connector optical interfaces. Optical interface. 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre
    AMENDMENT 1:February 2012
  • IEC 62034:2012 (Edition 2) Automatic test systems for battery powered emergency escape lighting
  • IEC 62047-13:2012 Semiconductor devices. Micro-electromechanical devices. Bend and shear type test methods of measuring adhesive strength for MEMS structures
  • IEC 62047-14:2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials
  • IEC 62271-102:2001/A1:2011 High-voltage switchgear and controlgear. Alternating current disconnectors and earthing switches
    CORRIGENDUM 1:January 2012
  • IEC 62282-3-100:2012 Fuel cell technologies. Stationary fuel cell power systems. Safety
  • IEC 62337:2012 (Edition 2) Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
  • IEC 62381:2012 (Edition 2) Automation systems in the process industry. Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
  • IEC 62439-4:2010 Industrial communication networks. High availability automation networks. Crossnetwork Redundancy Protocol (CRP)
    AMENDMENT 1:February 2012
  • IEC 62560:2011 Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications
    CORRIGENDUM 1:January 2012
  • IEC 62561-1:2012 Lightning protection system components (LPSC). Requirements for connection components
  • IEC 62561-2:2012 Lightning protection system components (LPSC). Requirements for conductors and earth electrodes
  • IEC 62561-3:2012 Lightning Protection System Components (LPSC). Requirements for isolating spark gaps (ISG)
  • IEC 62639:2012 Fluorescent induction lamps. Performance specification
  • IEC 80601-2-60:2012 Medical electrical equipment. Particular requirements for the basic safety and essential performance of dental equipment

Published in international.