ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A181/A181M Standard Specification for Carbon Steel Forgings, for General-Purpose Piping has been reapproved, available as A181/A181M-06(2011) developed by Committee A01.22, ASTM BOS Volume 01.01.
  • A328/A328M Standard Specification for Steel Sheet Piling has been reapproved, available as A328/A328M-07(2012) developed by Committee A01.02, ASTM BOS Volume 01.04.
  • A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service has been reapproved, available as A376/A376M-06(2011) developed by Committee A01.10, ASTM BOS Volume 01.01.
  • A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates has been reapproved, available as A435/A435M-90(2012) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A577/A577M Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates has been reapproved, available as A577/A577M-90(2012) developed by Committee A01.11, ASTM BOS Volume 01.04.
  • A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn has been reapproved, available as A679/A679M-06(2012) developed by Committee A01.03, ASTM BOS Volume 01.03.
  • A745/A745M Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings has been revised to A745/A745M-12 developed by Committee A01.06, ASTM BOS Volume 01.05.
  • A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable has been revised to A1008/A1008M-12 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength has been revised to A1011/A1011M-12 developed by Committee A01.19, ASTM BOS Volume 01.03.
  • A1046/A1046M Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process has been editorially changed, available as A1046/A1046M-10ae1 developed by Committee A05.11, ASTM BOS Volume 01.06.
  • A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings is a new standard, now available. A1077/A1077M-12 developed by Committee A01.02, ASTM BOS Volume 01.04.
  • B22 Standard Specification for Bronze Castings for Bridges and Turntables has been editorially changed, available as B22-09e2 developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar has been reapproved, available as B151/B151M-05(2011) developed by Committee B05.02, ASTM BOS Volume 02.01.
  • B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire has been revised (with title change) to B211-12 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) has been revised (with title change) to B211M-12 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric) has been revised to B221M-12 developed by Committee B07.03, ASTM BOS Volume 02.02.
  • B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe has been editorially changed, available as B658/B658M-11e1 developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples has been reapproved, available as B687-99(2011) developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B706 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube has been reapproved, available as B706-00(2011) developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application has been editorially changed, available as B752-06(2011)e2 developed by Committee B10.02, ASTM BOS Volume 02.04.
  • B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems has been reapproved, available as B819-00(2011) developed by Committee B05.04, ASTM BOS Volume 02.01.
  • C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens has been revised to C39/C39M-12 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete has been revised to C42/C42M-12 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C94/C94M Standard Specification for Ready-Mixed Concrete has been revised to C94/C94M-12 developed by Committee C09.40, ASTM BOS Volume 04.02.
  • C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) has been revised to C109/C109M-11b developed by Committee C01.27, ASTM BOS Volume 04.01.
  • C123/C123M Standard Test Method for Lightweight Particles in Aggregate has been revised to C123/C123M-12 developed by Committee C09.20, ASTM BOS Volume 04.02.
  • C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation has been editorially changed, available as C578-11be1 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete has been revised to C618-12 developed by Committee C09.24, ASTM BOS Volume 04.02.
  • C965 Standard Practice for Measuring Viscosity of Glass Above the Softening Point has been reapproved, available as C965-96(2012) developed by Committee C14.04, ASTM BOS Volume 15.02.
  • C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) has been revised to C1071-12 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration has been revised to C1202-12 developed by Committee C09.66, ASTM BOS Volume 04.02.
  • C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications has been revised to C1313/C1313M-12 developed by Committee C16.21, ASTM BOS Volume 04.06.
  • C1351M Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa s and 108 Pa s by Viscous Compression of a Solid Right Cylinder [Metric] has been reapproved, available as C1351M-96(2012) developed by Committee C14.04, ASTM BOS Volume 15.02.
  • C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems has been revised to C1534-12 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete has been revised to C1602/C1602M-12 developed by Committee C09.40, ASTM BOS Volume 04.02.
  • C1658/C1658M Standard Specification for Glass Mat Gypsum Panels has been revised to C1658/C1658M-12 developed by Committee C11.01, ASTM BOS Volume 04.01.
  • C1749 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer is a new standard, now available. C1749-12 developed by Committee C01.22, ASTM BOS Volume 04.01.
  • D276 Standard Test Methods for Identification of Fibers in Textiles has been revised to D276-12 developed by Committee D13.51, ASTM BOS Volume 07.01.
  • D388 Standard Classification of Coals by Rank has been revised to D388-12 developed by Committee D05.18, ASTM BOS Volume 05.06.
  • D575 Standard Test Methods for Rubber Properties in Compression has been reapproved, available as D575-91(2012) developed by Committee D11.10, ASTM BOS Volume 09.01.
  • D977 Standard Specification for Emulsified Asphalt has been revised to D977-12 developed by Committee D04.41, ASTM BOS Volume 04.03.
  • D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures has been revised to D979/D979M-12 developed by Committee D04.30, ASTM BOS Volume 04.03.
  • D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion has been editorially changed, available as D1044-08e1 developed by Committee D20.10, ASTM BOS Volume 08.01.
  • D1415 Standard Test Method for Rubber Property—International Hardness has been reapproved, available as D1415-06(2012) developed by Committee D11.10, ASTM BOS Volume 09.01.
  • D1464 Standard Practice for Differential Dyeing Behavior of Cotton has been revised (with title change) to D1464-12 developed by Committee D13.11, ASTM BOS Volume 07.01.
  • D1483 Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method has been revised to D1483-12 developed by Committee D01.24, ASTM BOS Volume 06.01.
  • D1909 Standard Table of Commercial Moisture Regains for Textile Fibers has been reapproved, available as D1909-04(2012) developed by Committee D13.51, ASTM BOS Volume 07.01.
  • D1988 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes has been reapproved, available as D1988-06(2011) developed by Committee D03.07, ASTM BOS Volume 05.06.
  • D2102 Standard Test Method for Shrinkage of Textile Fibers (Bundle Test) has been reapproved (with editorial change), available as D2102-02(2012)e1 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2257 Standard Test Method for Extractable Matter in Textiles has been reapproved, available as D2257-98(2012) developed by Committee D13.51, ASTM BOS Volume 07.01.
  • D2258 Standard Practice for Sampling Yarn for Testing has been reapproved, available as D2258-99(2012) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2486 Standard Test Methods for Scrub Resistance of Wall Paints has been reapproved (with editorial change), available as D2486-06(2012)e1 developed by Committee D01.42, ASTM BOS Volume 06.02.
  • D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings has been revised to D2513-12 developed by Committee F17.60, ASTM BOS Volume 08.04.
  • D2644 Standard Tolerances for Yarns Spun on the Woolen System has been revised to D2644-12 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping has been revised to D2774-12 developed by Committee F17.61, ASTM BOS Volume 08.04.
  • D2977 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes (Withdrawn 2012) has been withdrawn, with no replacement. D2977-03 developed by Committee D18.22, ASTM BOS Volume 04.08.
  • D3160 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (&agr;–Methylstyrene) has been revised to D3160-12 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber has been revised to D3273-12 developed by Committee D01.28, ASTM BOS Volume 06.01.
  • D3562 Standard Performance Specification for Woven Drycleanable Coat Fabrics has been reapproved, available as D3562-99(2012) developed by Committee D13.61, ASTM BOS Volume 07.01.
  • D3823 Standard Practice for Determining Ticket Numbers for Sewing Threads has been reapproved, available as D3823-07(2012) developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D3888 Standard Terminology for Yarn Spinning Systems has been revised to D3888-12 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D4111 Standard Performance Specification for Woven Napery and Tablecloth Fabrics: Household and Institutional has been reinstated, with revision to D4111-12 developed by Committee D13.63, ASTM BOS Volume 07.01.
  • D4522 Standard Performance Specification for Feather and Down Fillings for Textile Products has been reapproved, available as D4522-04(2012) developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D4524 Standard Test Method for Composition of Plumage has been reapproved, available as D4524-86(2012) developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D4537 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities has been revised to D4537-12 developed by Committee D33.04, ASTM BOS Volume 06.02.
  • D4619 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems has been revised to D4619-12 developed by Committee D33.09, ASTM BOS Volume 06.02.
  • D4721 Standard Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories has been reinstated, with revision to D4721-12 developed by Committee D13.63, ASTM BOS Volume 07.02.
  • D4769 Standard Specification for Woven and Warp Knitted Comforter Fabrics has been reinstated, with revision to D4769-12 developed by Committee D13.63, ASTM BOS Volume 07.02.
  • D4984 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes has been reapproved, available as D4984-06(2011) developed by Committee D03.07, ASTM BOS Volume 05.06.
  • D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics has been revised to D5199-12 developed by Committee D35.03, ASTM BOS Volume 04.13.
  • D5343 Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners has been reapproved, available as D5343-06(2012) developed by Committee D12.16, ASTM BOS Volume 15.04.
  • D5378 Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use has been reinstated, with revision to D5378-12 developed by Committee D13.63, ASTM BOS Volume 07.02.
  • D5432 Standard Performance Specification for Blanket Products for Institutional and Household Use has been reinstated, with revision to D5432-12 developed by Committee D13.63, ASTM BOS Volume 07.02.
  • D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock has been revised to D5434-12 developed by Committee D18.07, ASTM BOS Volume 04.08.
  • D5498 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities has been revised to D5498-12 developed by Committee D33.04, ASTM BOS Volume 06.02.
  • D5898 Standard Guide for Standard Details for Adhered Sheet Waterproofing has been editorially changed, available as D5898/D5898M-96(2005)e1 developed by Committee D08.22, ASTM BOS Volume 04.04.
  • D6119 Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic has been revised to D6119-12 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D6240/D6240M Standard Tables of Body Measurements for Mature Men, ages 35 and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short, Regular, and Tall has been revised to D6240/D6240M-12 developed by Committee D13.55, ASTM BOS Volume 07.02.
  • D6262 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) has been reinstated, with revision to D6262-12 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D6283 Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings has been revised to D6283-12 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D6348 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy has been revised to D6348-12 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D6522 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers has been revised to D6522-11 developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D6540 Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering has been revised to D6540-12 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D6603 Standard Specification for Labeling of UV-Protective Textiles has been revised (with title change) to D6603-12 developed by Committee D13.65, ASTM BOS Volume 07.02.
  • D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures has been revised to D6931-12 developed by Committee D04.26, ASTM BOS Volume 04.03.
  • D6962 Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings has been revised to D6962-12 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D6980 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight has been revised to D6980-12 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D6997 Standard Test Method for Distillation of Emulsified Asphalt has been revised to D6997-12 developed by Committee D04.42, ASTM BOS Volume 04.03.
  • D7017 Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics has been revised to D7017-12 developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D7018/D7018M Standard Terminology Relating to Glass Fiber and Its Products has been revised to D7018/D7018M-12 developed by Committee D13.18, ASTM BOS Volume 07.02.
  • D7020 Standard Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics has been reapproved, available as D7020-05(2012) developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D7021 Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics has been reapproved, available as D7021-05(2012) developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D7250/D7250M Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness has been reapproved, available as D7250/D7250M-06(2012) developed by Committee D30.09, ASTM BOS Volume 15.03.
  • D7268 Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear has been revised to D7268-12 developed by Committee D13.61, ASTM BOS Volume 07.02.
  • D7449/D7449M Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line has been editorially changed, available as D7449/D7449M-08e1 developed by Committee D09.12, ASTM BOS Volume 10.02.
  • D7492/D7492M Standard Guide for Use of Drainage System Media with Waterproofing Systems is a new standard, now available. D7492/D7492-11 developed by Committee D08.22, ASTM BOS Volume 04.04.
  • D7700 Standard Guide for Selecting Test Methods for Geomembrane Seams is a new standard, now available. D7700-12 developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration has been revised to D7704-12 developed by Committee D16.07, ASTM BOS Volume 06.04.
  • D7733 Standard Specification for Acrylic Dispersion Ground is a new standard, now available. D7733-12 developed by Committee D01.57, ASTM BOS Volume 06.02.
  • D7746 Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests is a new standard, now available. D7746-11 developed by Committee D07.05, ASTM BOS Volume 04.10.
  • D7748 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products is a new standard, now available. D7748-12 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry is a new standard, now available. D7757-12 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7759 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration is a new standard, now available. D7759-12 developed by Committee D18.08, ASTM BOS Volume 04.09.
  • D7773 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography is a new standard, now available. D7773-12 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D7785 Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration is a new standard, now available. D7785-12 developed by Committee D13.11, ASTM BOS Volume 07.02.
  • E10 Standard Test Method for Brinell Hardness of Metallic Materials has been revised to E10-12 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E18 Standard Test Methods for Rockwell Hardness of Metallic Materials has been revised to E18-11 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E45 Standard Test Methods for Determining the Inclusion Content of Steel has been revised to E45-11a developed by Committee E04.09, ASTM BOS Volume 03.01.
  • E103 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials has been reinstated, with revision to E103-12 developed by Committee E28.06, ASTM BOS Volume 03.01.
  • E135 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials has been revised to E135-11b developed by Committee E01.23, ASTM BOS Volume 03.05.
  • E384 Standard Test Method for Knoop and Vickers Hardness of Materials has been editorially changed, available as E384-11e1 developed by Committee E04.05, ASTM BOS Volume 03.01.
  • E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectrometry has been revised to E841-12 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E874 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels has been revised to E874-11 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E997 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods has been revised to E997-11 developed by Committee E06.51, ASTM BOS Volume 04.11.
  • E1388 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples has been revised to E1388-12 developed by Committee E30.01, ASTM BOS Volume 14.02.
  • E1417/E1417M Standard Practice for Liquid Penetrant Testing has been editorially changed, available as E1417/E1417M-11e1 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1490 Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions has been revised to E1490-11 developed by Committee E18.07, ASTM BOS Volume 15.08.
  • E1793 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters has been revised to E1793-11 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1867 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers has been revised to E1867-11 developed by Committee E37.10, ASTM BOS Volume 14.02.
  • E1971 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings has been reapproved, available as E1971-05(2011) developed by Committee E60.01, ASTM BOS Volume 04.12.
  • E1974 Standard Specification for Shelter, Electrical Equipment S-250/G has been revised to E1974-11 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E1976 Standard Specification for Shelter, Tactical, Nonexpandable has been revised to E1976-11 developed by Committee E06.53, ASTM BOS Volume 04.11.
  • E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Spectrometry has been revised (with title change) to E2050-12 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E2088 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments has been reapproved, available as E2088-06(2011) developed by Committee E21.05, ASTM BOS Volume 15.03.
  • E2260 Standard Guide for Repointing (Tuckpointing) Historic Masonry has been reapproved, available as E2260-03(2012) developed by Committee E06.24, ASTM BOS Volume 04.12.
  • E2517 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer) has been revised to E2517-11 developed by Committee E06.53, ASTM BOS Volume 04.12.
  • E2518 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer) has been revised to E2518-11 developed by Committee E06.53, ASTM BOS Volume 04.12.
  • E2610 Standard Test Method for Sensory Analysis—Duo-Trio Test has been reapproved, available as E2610-08(2011) developed by Committee E18.04, ASTM BOS Volume 15.08.
  • E2639 Standard Test Method for Blast Resistance of Trash Receptacles has been revised to E2639-12 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2740 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing has been revised to E2740-12 developed by Committee E54.08, ASTM BOS Volume 15.08.
  • E2785 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions is a new standard, now available. E2785-11 developed by Committee E06.21, ASTM BOS Volume 04.12.
  • E2813 Standard Practice for Building Enclosure Commissioning is a new standard, now available. E2813-12 developed by Committee E06.55, ASTM BOS Volume 04.12.
  • E2859 Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy is a new standard, now available. E2859-11 developed by Committee E56.02, ASTM BOS Volume 14.02.
  • E2862 Standard Practice for Probability of Detection Analysis for Hit/Miss Data is a new standard, now available. E2862-12 developed by Committee E07.10, ASTM BOS Volume 03.03.
  • E2866 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid is a new standard, now available. E2866-12 developed by Committee E54.03, ASTM BOS Volume 15.08.
  • F16 Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps has been revised to F16-12 developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F18 Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices has been revised to F18-12 developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F91 Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector has been reapproved, available as F91-06(2011) developed by Committee E21.05, ASTM BOS Volume 15.03.
  • F106 Standard Specification for Brazing Filler Metals for Electron Devices has been revised to F106-12 developed by Committee F01.03, ASTM BOS Volume 10.04.
  • F109 Standard Terminology Relating to Surface Imperfections on Ceramics has been revised to F109-12 developed by Committee C21.01, ASTM BOS Volume 15.02.
  • F360 Standard Practice for Image Evaluation of Electrostatic Business Copies has been reapproved, available as F360-82(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F402 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings has been reapproved, available as F402-05(2012) developed by Committee F17.20, ASTM BOS Volume 08.04.
  • F480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 has been revised to F480-12 developed by Committee F17.61, ASTM BOS Volume 08.04.
  • F486 Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners has been reapproved, available as F486-01(2011) developed by Committee F11.93, ASTM BOS Volume 15.08.
  • F494 Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners has been reapproved, available as F494-05(2011) developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F498 Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis has been revised to F498-12 developed by Committee F27.30, ASTM BOS Volume 15.07.
  • F505 Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners has been reapproved, available as F505-87(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F555 Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner has been reapproved, available as F555-01(2011) developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F556 Standard Test Method for Curl of Carbonless Copy Papers has been reapproved, available as F556-88(2011) developed by Committee F05.06, ASTM BOS Volume 15.09.
  • F590 Standard Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants has been revised to F590-12 developed by Committee F15.06, ASTM BOS Volume 15.11.
  • F605 Standard Practice for Determining Compatibility of One-Time Carbon Paper with Carbonless Copy Papers When Interleaved into the Same Manifold Set has been reapproved, available as F605-88(2011) developed by Committee F05.06, ASTM BOS Volume 15.09.
  • F685 Standard Practice for Determining Toner Usage, Efficiency, and Dusting Nonheat Fixing Copiers Using Single-Component Toner Systems has been reapproved, available as F685-96(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F686 Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter has been reapproved, available as F686-94(2011) developed by Committee F05.06, ASTM BOS Volume 15.09.
  • F706 Standard Practice for Determination of Fusion Temperature of Dry Electrostatic Heat-Fixing Toners has been reapproved, available as F706-96(2011) developed by Committee F05.04, ASTM BOS Volume 15.09.
  • F779 Standard Test Method for Torsion Characteristic of Alpine Skis has been revised to F779-12 developed by Committee F27.30, ASTM BOS Volume 15.07.
  • F884 Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner has been reapproved, available as F884-01(2011) developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F888 Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt Receptacle in a Vacuum Cleaner has been reapproved, available as F888-06(2011) developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F922 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle has been reapproved, available as F922-01(2011) developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F1038 Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator has been reapproved, available as F1038-02(2011) developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F1101 Standard Specification for Ventilators Intended for Use During Anesthesia (Withdrawn 2012) has been withdrawn, with no replacement. F1101-90(2003)e1 developed by Committee F29.10, ASTM BOS Volume 13.02.
  • F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners has been editorially changed, available as F1137-11e1 developed by Committee F16.03, ASTM BOS Volume 01.08.
  • F1175 Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison has been reapproved, available as F1175-88(2011) developed by Committee F05.06, ASTM BOS Volume 15.09.
  • F1320 Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument has been reapproved, available as F1320-01(2011) developed by Committee F05.06, ASTM BOS Volume 15.09.
  • F1326 Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners has been reapproved, available as F1326-02(2011) developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F1410 Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners has been reapproved, available as F1410-98(2011) developed by Committee F11.23, ASTM BOS Volume 15.08.
  • F1580 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants has been revised to F1580-12 developed by Committee F04.12, ASTM BOS Volume 13.01.
  • F1587 Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders has been revised to F1587-12 developed by Committee F08.15, ASTM BOS Volume 15.07.
  • F1595 Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches has been reapproved, available as F1595-00(2012) developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1601 Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems has been reapproved, available as F1601-01(2011) developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples has been editorially changed, available as F1667-11ae1 developed by Committee F16.05, ASTM BOS Volume 01.08.
  • F1689 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch has been reapproved, available as F1689-05(2012) developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F1692 Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems has been reapproved, available as F1692-01(2011) developed by Committee F11.30, ASTM BOS Volume 15.08.
  • F1732 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material has been revised to F1732-12 developed by Committee F17.62, ASTM BOS Volume 08.04.
  • F1995 Standard Test Method for Determining the Shear Force of a Surface Mount Device (SMD) in a Membrane Switch has been revised (with title change) to F1995-12 developed by Committee F01.18, ASTM BOS Volume 10.04.
  • F2033 Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials has been revised to F2033-12 developed by Committee F04.22, ASTM BOS Volume 13.01.
  • F2035 Standard Practice for Measuring the Dark Stability of Ink Jet Prints has been reapproved, available as F2035-00(2011) developed by Committee F05.07, ASTM BOS Volume 15.09.
  • F2037 Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments has been reapproved, available as F2037-00(2011) developed by Committee F05.07, ASTM BOS Volume 15.09.
  • F2088 Standard Consumer Safety Specification for Infant Swings has been revised to F2088-12 developed by Committee F15.21, ASTM BOS Volume 15.11.
  • F2135 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings has been reapproved, available as F2135-01(2012) developed by Committee F17.63, ASTM BOS Volume 08.04.
  • F2280 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength Editorial Review Board change F2280-12 developed by Committee F16.02, ASTM BOS Volume 01.08.
  • F2366 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus has been reapproved, available as F2366-05(2011) developed by Committee F05.07, ASTM BOS Volume 15.09.
  • F2393 Standard Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications has been revised to F2393-12 developed by Committee F04.13, ASTM BOS Volume 13.01.
  • F2459 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis has been revised to F2459-12 developed by Committee F04.15, ASTM BOS Volume 13.01.
  • F2498 Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method has been reapproved, available as F2498-05(2011) developed by Committee F05.07, ASTM BOS Volume 15.09.
  • F2509 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing has been reapproved, available as F2509-06(2012) developed by Committee F17.60, ASTM BOS Volume 08.04.
  • F2555 Standard Practice for Determining Page Yield of Ink Jet Printer Cartridges—Continuous Printing Method has been reapproved, available as F2555-06(2011) developed by Committee F05.07, ASTM BOS Volume 15.09.
  • F2601 Standard Specification for Fire Safety for Candle Accessories has been revised to F2601-12 developed by Committee F15.45, ASTM BOS Volume 15.11.
  • F2792 Standard Terminology for Additive Manufacturing Technologies, has been revised to F2792-12a developed by Committee F42.91, ASTM BOS Volume 10.04.
  • F2874 Standard Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers is a new standard, now available. F2874-12 developed by Committee F15.10, ASTM BOS Volume 15.11.
  • F2877 Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum has been editorially changed, available as F2877-11e1 developed by Committee F25.02, ASTM BOS Volume 01.07.
  • F2894 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven has been revised to F2894-12 developed by Committee F23.80, ASTM BOS Volume 11.03.
  • F2919/F2919M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels is a new standard, now available. F2919/F2919M-12 developed by Committee F14.35, ASTM BOS Volume 01.06.
  • F2922 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers is a new standard, now available. F2922-12 developed by Committee F17.65, ASTM BOS Volume 08.04.
  • F2924 Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion is a new standard, now available. F2924-12 developed by Committee F42.05, ASTM BOS Volume 10.04.
  • F2934 Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications is a new standard, now available. F2934-12 developed by Committee F25.11, ASTM BOS Volume 01.07.
  • F2935 Standard Specification for Chocks, Panama, Mooring Cast Steel is a new standard, now available. F2935-12 developed by Committee F25.01, ASTM BOS Volume 01.07.

Published in international.