BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATIONS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 598-1:2011 Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for the measurement of the rate of spread of coated chippings and the temperature of bituminous mixtures using noncontact temperature-measuring devices and for the assessment of the compaction performance of a roller
    Supersedes BS 598-108:2005 and BS 598-109:1990
  • BS 1877-10:2011 Domestic bedding. Specification for mattresses and bumpers for children's cots, perambulators and similar domestic articles
    Supersedes BS 1877-10:1997
  • BS 1881-122:2011 Testing concrete. Method for determination of water absorption
    Supersedes BS 1881-122:1983
  • BS 2000-10:2011 Methods of test for petroleum and its products. Determination of kerosine burning characteristics 24-hour method
    Supersedes BS 2000-10:1995
  • BS 4800F:2011 BS 4800 Colour matching fan
  • BS 5834-2:2011 Surface boxes, guards and underground chambers for the purposes of utilities. Specification for surface boxes
    Supersedes BS 5834-2:1983 and BS 5834-3:1985
  • BS 5834-4:2011 Surface boxes, guards and underground chambers for the purposes of utilities. Specification for utility chambers
    Supersedes BS 5834-4:1989
  • BS 6164:2011 Code of practice for health and safety in tunnelling in the construction industry
    Supersedes BS 6164:2001
  • BS 6230:2011 Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases)
    Supersedes BS 6230:2005
  • BS 6266:2011 Fire protection for electronic equipment installations. Code of practice
    Supersedes BS 6266:2002
  • BS 7993:2011 Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 54-1:2011 Fire detection and fire alarm systems. Introduction
    Supersedes BS EN 54-1:1996
  • BS EN 71-2:2011 Safety of toys. Flammability
    Supersedes BS EN 71-2:2006+A1:2007
  • BS EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
    Supersedes BS EN 88-1:2007, BS EN 12067-1:1999 and BS EN 12078:1998 which remains current
  • BS EN 287-1:2011 Qualification test of welders. Fusion welding. Steels
    Supersedes BS EN 287-1:2004
  • BS EN 320:2011 Particleboards and fibreboards. Determination of resistance to axial withdrawal of screws
    Supersedes BS EN 320:1993
  • BS EN 544:2011 Bitumen shingles with mineral and/or synthetic reinforcements. Product specification and test methods
    Supersedes BS EN 544:2005
  • BS EN 594:2011 Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels
    Supersedes BS EN 594:1996
  • BS EN 912:2011 Timber fasteners. Specifications for connectors for timbers
    Supersedes BS EN 912:2000
  • BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection. Basic concepts and methodology
    Supersedes BS EN 1127-1:2007
  • BS EN 1264-1:2011 Water based surface embedded heating and cooling systems. Definitions and symbols
    Supersedes BS EN 1264-1:1998
  • BS EN ISO 1518-1:2011 Paints and varnishes. Determination of scratch resistance. Constant-loading method
    Supersedes BS EN ISO 1518:2001
  • BS EN 1811:2011 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
    Supersedes BS EN 1811:1998+A1:2008 which remains current
  • BS EN 2240-066:2011 Aerospace series. Lamps, incandescent. Lamp, code 1829. Product standard
  • BS EN 2240-067:2011 Aerospace series. Lamps, incandescent. Lamp, code 1843. Product standard
  • BS EN 2240-068:2011 Aerospace series. Lamps, incandescent. Lamp, code 1864. Product standard
  • BS EN 2240-069:2011 Aerospace series. Lamps, incandescent. Lamp, code 1978. Product standard
  • BS EN 2240-070:2011 Aerospace series. Lamps, incandescent. Lamp, code 2232. Product standard
  • BS EN 2240-071:2011 Aerospace series. Lamps, incandescent. Lamp, code 3011. Product standard
  • BS EN 2240-072:2011 Aerospace series. Lamps, incandescent. Lamp, code 3912. Product standard
  • BS EN 2240-073:2011 Aerospace series. Lamps, incandescent. Lamp, code 4174. Product standard
  • BS EN 2240-074:2011 Aerospace series. Lamps, incandescent. Lamp, code 5086. Product standard
  • BS EN 2240-075:2011 Aerospace series. Lamps, incandescent. Lamp, code 5448. Product standard
  • BS EN 2240-076:2011 Aerospace series. Lamps, incandescent. Lamp, code 5678. Product standard
  • BS EN 2240-077:2011 Aerospace series. Lamps, incandescent. Lamp, code 6832. Product standard
  • BS EN 2240-078:2011 Aerospace series. Lamps, incandescent. Lamp, code 6838. Product standard
  • BS EN 2240-079:2011 Aerospace series. Lamps, incandescent. Lamp, code 6839. Product standard
  • BS EN 2491:2011 Aerospace series. Molybdenum disulphide dry lubricants. Coating methods
    Supersedes BS EN 2491:1997
  • BS EN 2535:2011 Aerospace series. Vacuum deposition of cadmium
  • BS EN 2997-001:2011 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Technical specification
    Supersedes BS EN 2997-001:2006
  • BS EN 2997-014:2011 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65°C to 175°C continuous, 200°C continuous, 260°C peak. Square flange receptacle with integrated accessory. Product standard
  • BS EN 3155-002:2011 Aerospace series. Electrical contacts used in elements of connection. List and utilization of contacts
    Supersedes BS EN 3155-002:2006
  • BS EN ISO 4413:2010 Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
    Supersedes BS EN 982:1996+A1:2008 and BS ISO 4413:1998
  • BS EN ISO 4414:2010 Pneumatic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
    Supersedes BS EN 983:1996+A1:2008 and BS ISO 4414:1998
  • BS EN 4593:2011 Aerospace series. Paints and varnishes. Determination of solar absorptance
  • BS EN 4683:2011 Aerospace series. Steel FE-WM 3504 (X4CrNiMo16-5-1). Air melted. Filler metal for welding. Wire and rod
  • BS EN 4685:2011 Aerospace series. Titanium Ti10V2Fe3Al. Bars. D < 110 mm. Rm ? 1240 MPa
  • BS EN ISO 5364:2011 Anaesthetic and respiratory equipment. Oropharyngeal airways
    Supersedes BS EN 12181:1998
  • BS EN ISO 6158:2011 Metallic and other inorganic coatings. Electrodeposited coatings of chromium for engineering purposes
    Supersedes BS EN ISO 6158:2004
  • BS EN ISO 6185-4:2011 Inflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater
  • BS EN ISO 6875:2011 Dentistry. Patient chair
    Supersedes BS EN ISO 6875:1997
  • BS EN ISO 7048:2011 Cross-recessed cheese head screws
    Supersedes BS EN ISO 7048:1999
  • BS EN ISO 7711-2:2011 Dentistry. Rotary diamond instruments. Discs
    Supersedes BS EN ISO 7711-2:1996
  • BS EN ISO 8565:2011 Metals and alloys. Atmospheric corrosion testing. General requirements
    Supersedes BS EN ISO 8565:1995
  • BS EN 9101:2011 Quality management systems. Audit requirements for aviation, space, and defence organizations
    Supersedes BS EN 9101:2008
  • BS EN ISO 9999:2011 Assistive products for persons with disability. Classification and terminology
    Supersedes BS EN ISO 9999:2007
  • BS EN ISO 10218-2:2011 Robots and robotic devices. Safety requirements for industrial robots. Robot systems and integration
  • BS EN ISO 10769:2011 Clay geosynthetic barriers. Determination of water absorption of bentonite
  • BS EN ISO 11925-2:2010 Reaction to fire tests. Ignitability of products subjected to direct impingement of flame. Single-flame source test
    Supersedes BS EN ISO 11925-2:2002
  • BS EN 12168:2011 Copper and copper alloys. Hollow rod for free machining purposes
    Supersedes BS EN 12168:1998
  • BS EN 12326-2:2011 Slate and stone for discontinuous roofing and external cladding. Methods of test for slate and carbonate slate
    Supersedes BS EN 12326-2:2000
  • BS EN 12369-2:2011 Wood-based panels. Characteristic values for structural design. Plywood
    Supersedes BS EN 12369-2:2004
  • BS EN 12561-1:2011 Railway applications. Tank wagons. Identification plates for tank wagons for the carriage of dangerous goods
    Supersedes BS EN 12561-1:1999
  • BS EN 12561-2:2011 Railway applications. Tank wagons. Bottom emptying devices for liquid products including vapour return
    Supersedes BS EN 12561-2:2002
  • BS EN 12561-3:2011 Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure
    Supersedes BS EN 12561-3:2002
  • BS EN 12561-4:2011 Railway applications. Tank wagons. Devices for top filling and emptying of liquid products
    Supersedes BS EN 12561-4:2002
  • BS EN 12561-5:2011 Railway applications. Tank wagons. Devices for vapour return while filling or emptying of liquid products
    Supersedes BS EN 12561-5:2002
  • BS EN 12561-6:2011 Railway applications. Tank wagons. Manholes
    Supersedes BS EN 12561-6:2002
  • BS EN 12561-7:2011 Railway applications. Tank wagons. Platforms and ladders
    Supersedes BS EN 12561-7:2004
  • BS EN 12561-8:2011 Railway applications. Tank wagons. Heating connections
    Supersedes BS EN 12561-8:2004
  • BS EN 12665:2011 Light and lighting. Basic terms and criteria for specifying lighting requirements
    Supersedes BS EN 12665:2002
  • BS EN 13050:2011 Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
    Supersedes DD ENV 13050:2001
  • BS EN 13141-4:2011 Ventilation for buildings. Performance testing of components/products for residential ventilation. Fans used in residential ventilation systems
    Supersedes BS EN 13141-4:2004
  • BS EN ISO 13385-1:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Callipers. Design and metrological characteristics
    Supersedes BS 887:2008 which remains current
  • BS EN ISO 13385-2:2011 Geometrical product specifications (GPS). Dimensional measuring equipment. Calliper depth gauges. Design and metrological characteristics
    Supersedes BS 6365:2008 which remains current
  • BS EN ISO 13501:2011 Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation
    Supersedes BS EN ISO 13501:2006
  • BS EN ISO 14160:2011 Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices
    Supersedes BS EN ISO 14160:1998
  • BS EN ISO 14372:2011 Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
    Supersedes BS EN ISO 14372:2001
  • BS EN 14535-2:2011 Railway applications. Brake discs for railway rolling stock. Brake discs mounted onto the wheel, dimensions and quality requirements
  • BS EN 14778:2011 Solid biofuels. Sampling
    Supersedes DD CEN/TS 14778-1:2005, DD CEN/TS 14778-2:2005 and DD CEN/TS 14779:2005
  • BS EN 14870-1:2011 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Induction bends
    Supersedes BS EN 14870-1:2004
  • BS EN 15080-8:2009 Extended application of results from fire resistance tests. Beams
  • BS EN 15722:2011 Intelligent transport systems. eSafety. eCall minimum set of data (MSD)
    Supersedes DD CEN/TS 15722:2009
  • BS EN 15820:2011 Polymer modified bituminous thick coatings for waterproofing. Determination of watertightness
  • BS EN 15889:2011 Fire-fighting hoses. Test methods
  • BS EN 15943:2011 Curriculum exchange format (CEF). Data model
  • BS EN 16009:2011 Flameless explosion venting devices
  • BS EN ISO 16050:2011 Foodstuffs. Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products. High performance liquid chromatographic method
    Supersedes BS EN 12955:1999
  • BS EN ISO 16120-1:2011 Non-alloy steel wire rod for conversion to wire. General requirements
    Supersedes BS EN 10016-1:1995
  • BS EN ISO 16120-2:2011 Non-alloy steel wire rod for conversion to wire. Specific requirements for general-purpose wire rod
    Supersedes BS EN 10016-2:1995
  • BS EN ISO 16120-3:2011 Non-alloy steel wire rod for conversion to wire. Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
    Supersedes BS EN 10016-3:1995
  • BS EN ISO 16120-4:2011 Non-alloy steel wire rod for conversion to wire. Specific requirements for wire rod for special applications
    Supersedes BS EN 10016-4:1995
  • BS EN ISO 17402:2011 Soil quality. Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials
  • BS EN ISO 20963:2011 Soil quality. Effects of pollutants on insect larvae (Oxythyrea funesta). Determination of acute toxicity
  • BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Polyolefin coatings (3-layer PE and 3-layer PP)
  • BS EN ISO 23611-1:2011 Soil quality. Sampling of soil invertebrates. Hand-sorting and formalin extraction of earthworms
  • BS EN ISO 23611-2:2011 Soil quality. Sampling of soil invertebrates. Sampling and extraction of micro-arthropods (Collembola and Acarina)
  • BS EN ISO 23611-3:2011 Soil quality. Sampling of soil invertebrates. Sampling and soil extraction of enchytraeids
  • BS EN ISO 23753-1:2011 Soil quality. Determination of dehydrogenase activity in soil. Method using triphenyltetrazolium chloride (TTC)
  • BS EN ISO 23753-2:2011 Soil quality. Determination of dehydrogenase activity in soils. Method using iodotetrazolium chloride (INT)
  • BS EN ISO 28706-5:2011 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion in closed systems
    Supersedes BS EN 14483-5:2004
  • BS EN ISO 28927-4:2010 Hand-held portable power tools. Test methods for evaluation of vibration emission. Straight grinders
    Supersedes BS EN ISO 8662-4:1995
  • BS EN ISO 28927-11:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Stone hammers
    Supersedes BS EN ISO 8662-14:1997
  • BS EN 50090-1:2011 Home and building electronic systems (HBES). Standardization structure
    Supersedes BS EN 50090-2-1:1996
  • BS EN 50173-1:2011 Information technology. Generic cabling systems. General requirements
    Supersedes BS EN 50173-1:2007+A1:2009
  • BS EN 50216-12:2011 Power transformer and reactor fittings. Fans
  • BS EN 50411-6-1:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Unprotected microduct for category S and A
  • BS EN 50527-2-1:2011 Procedure for the assessment of the exposure to electromagnetic fields of workers bearing active implantable medical devices. Specific assessment for workers with cardiac pacemakers
  • BS EN 50541-1:2011 Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3150 kVA, with highest voltage for equipment not exceeding 36 kV. General requirements
    Supersedes BS 7844-1:1996 and BS 7844-2:1996
  • BS EN 50551-1:2011 Simplex and duplex cables to be used for cords. Blank detail specification and minimum requirements
  • BS EN 55022:2010 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
    Supersedes BS EN 55022:2006+A2:2010 which remains current
  • BS EN 60034-16-1:2011 Rotating electrical machines. Excitation systems for synchronous machines. Definitions
    Supersedes BS EN 60034-16-1:1996 which remains current
  • BS EN 60086-1:2011 Primary batteries. General
    Supersedes BS EN 60086-1:2007 which remains current
  • BS EN 60086-3:2011 Primary batteries. Watch batteries
    Supersedes BS EN 60086-3:2005 which remains current
  • BS EN 60086-5:2011 Primary batteries. Safety of batteries with aqueous electrolyte
    Supersedes BS EN 60086-5:2005 which remains current
  • BS EN 60204-33:2011 Safety of machinery. Electrical equipment of machines. Requirements for semiconductor fabrication equipment
  • BS EN 60300-3-12:2011 Dependability management. Application guide. Integrated logistic support
    Supersedes BS EN 60300-3-12:2004
  • BS EN 60461:2011 Time and control code
    Supersedes BS EN 60461:2001
  • BS EN 60512-8-2:2011 Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8b. Static load, axial
    Supersedes BS 5772-5:1993 which remains current
  • BS EN 60512-8-3:2011 Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8c. Robustness of actuating lever
    Supersedes BS 5772-5:1993 which remains current
  • BS EN 60512-9-4:2011 Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9d. Durability of contact retention system and seals (maintenance, ageing)
    Supersedes BS 5772-5:1993 which remains current
  • BS EN 60512-17-2:2011 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17b. Cable clamp resistance to cable rotation
    Supersedes BS 5772-9:1993 which remains current
  • BS EN 60534-8-3:2011 Industrial-process control valves. Noise considerations. Control valve aerodynamic noise prediction method
    Supersedes BS EN 60534-8-3:2000 which remains current
  • BS EN 60603-7-1:2011 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors
    Supersedes BS EN 60603-7-1:2009
  • BS EN 60695-1-11:2011 Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment
    Supersedes BS EN 60695-1-1:2000
  • BS EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services. Optical equipment
    Supersedes BS EN 60728-6:2003
  • BS EN 60745-2-17:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for routers and trimmers
    Supersedes BS EN 60745-2-17:2003 which remains current
  • BS EN 60793-1-32:2010 Optical fibres. Measurement methods and test procedures. Coating strippability
    Supersedes BS EN 60793-1-32:2003
  • BS EN 60793-1-44:2011 Optical fibres. Measurement methods and test procedures. Cut-off wavelength
    Supersedes BS EN 60793-1-44:2002
  • BS EN 61000-4-15:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications
    Supersedes BS EN 61000-4-15:1998 which remains current
  • BS EN 61000-4-21:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Reverberation chamber test methods
    Supersedes BS EN 61000-4-21:2003 which remains current
  • BS EN 61029-2-3:2011 Safety of transportable motor-operated electric tools. Particular requirements for planers and thicknessers
  • BS EN 61029-2-4:2011 Safety of transportable motor-operated electric tools. Particular requirements for bench grinders
    Supersedes BS EN 61029-2-4:2003
  • BS EN 61029-2-12:2011 Safety of transportable motor-operated electric tools. Particular requirements for threading machines
  • BS EN 61167:2011 Metal halide lamps. Performance specification
    Supersedes BS EN 61167:1995
  • BS EN 61169-39:2011 Radio-frequency connectors. Sectional specification for CQM series quick lock RF connectors
    Supersedes DD IEC/PAS 61169-39:2008
  • BS EN 61169-40:2011 Radio-frequency connectors. Sectional specification for 2.4 series RF connectors
    Supersedes DD IEC/PAS 61169-40:2008
  • BS EN 61169-41:2011 Radio-frequency connectors. Sectional specification for CQA series quick lock R.F. coaxial connectors
    Supersedes DD IEC/PAS 61169-41:2009
  • BS EN 61300-2-5:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torsion
    Supersedes BS EN 61300-2-5:2002
  • BS EN 61300-3-45:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Attenuation of random mated multi-fibre connectors
  • BS EN 61307:2011 Industrial microwave heating installations. Test methods for the determination of power output
    Supersedes BS EN 61307:2006
  • BS EN 61753-141-2:2011 Fibre optic interconnecting devices and passive components. Performance standard. Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C. Controlled environments
  • BS EN 61784-3-18:2011 Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 18
    Supersedes DD IEC/PAS 61784-3-18:2009
  • BS EN 61837-2:2011 Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Ceramic enclosures
    Supersedes BS EN 61837-2:2001
  • BS EN 61850-4:2011 Communication networks and systems for power utility automation. System and project management
    Supersedes BS EN 61850-4:2002
  • BS EN 61883-1:2009 Consumer audio/video equipment. Digital interface. General
    Supersedes BS EN 61883-1:2003
  • BS EN 61937-3:2009 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the AC-3 and enhanced AC-3 formats
    Supersedes BS EN 61937-3:2003
  • BS EN 61937-10:2011 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format
  • BS EN 61954:2011 Static VAR compensators (SVC). Testing of thyristor valves
    Supersedes BS EN 61954:2000
  • BS EN 61966-12-1:2011 Multimedia systems and equipment. Colour measurement and management. Metadata for identification of colour gamut (Gamut ID)
  • BS EN 62116:2011 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters
  • BS EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments. Michelson interferometer single wavelength meters
  • BS EN 62258-2:2011 Semiconductor die products. Exchange data formats
    Supersedes BS EN 62258-2:2005
  • BS EN 62271-206:2011 High-voltage switchgear and controlgear. Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV
    Supersedes BS EN 61958:2001 which remains current
  • BS EN 62295:2009 Multimedia systems. Common communication protocol for inter-connectivity on heterogeneous networks
  • BS EN 62386-210:2011 Digital addressable lighting interface. Particular requirements for control gear. Sequencer (device type 9)
  • BS EN 62574:2011 Audio, video and multimedia systems. General channel assignment of multichannel audio
  • BS EN 62637-1:2011 Battery charging interface for small handheld multimedia devices. 2 mm barrel interface
  • BS EN 62637-2:2011 Battery charging interface for small handheld multimedia devices. 2 mm barrel type interface conformance testing
  • BS EN ISO 80601-2-61:2011 Medical electrical equipment. Particular requirements for basic safety and essential performance of pulse oximeter equipment
    Supersedes BS EN ISO 9919:2009
  • BS EN 140401-804:2011 Detail Specification. Fixed low power film high stability SMD resistors. Rectangular. Stability classes 0,1; 0,25
    Supersedes BS EN 140401-804:2005

BS ENs implemented by amendment

  • BS EN ISO 11260:2011 Soil quality. Determination of effective cation exchange capacity and base saturation level using barium chloride solution
    Implementation of European Standard EN ISO 11260 by amendment to BS 7755-3.3:1995
  • BS EN ISO 11664-1:2011 Colorimetry. CIE standard colorimetric observers
    Implementation of European Standard EN ISO 11664-1 by amendment to BS ISO 11664-1:2007
  • BS EN ISO 15175:2011 Soil quality.Characterization of soil related to groundwater protection
    Implementation of European Standard EN ISO 15175 by amendment to BS ISO 15175:2004
  • BS EN ISO 16072:2011 Soil quality. Laboratory methods for determination of microbial soil respiration
    Implementation of European Standard EN ISO 16072 by amendment to BS ISO 16072:2002
  • BS EN ISO 16212:2011 Cosmetics. Microbiology. Enumeration of yeast and mould
    Implementation of European Standard EN ISO 16212 by amendment to BS ISO 16212:2008
  • BS EN ISO 18415:2011 Cosmetics. Microbiology. Detection of specified and non-specified microorganisms
    Implementation of European Standard EN ISO 18415 by amendment to BS ISO 18415:2007
  • BS EN ISO 19258:2011 Soil quality. Guidance on the determination of background values
    Implementation of European Standard EN ISO 19258 by amendment to BS ISO 19258:2005
  • BS EN ISO 22030:2011 Soil quality. Biological methods. Chronic toxicity in higher plants
    Implementation of European Standard EN ISO 22030 by amendment to BS ISO 22030:2005
  • BS EN ISO 22892:2011 Soil quality. Guidelines for the identification of target compounds by gas chromatography and mass spectrometry
    Implementation of European Standard EN ISO 22892 by amendment to BS ISO 22892:2006
  • BS EN ISO 23470:2011 Soil quality. Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution
    Implementation of European Standard EN ISO 23470 by amendment to BS ISO 23470:2007
  • BS EN ISO 29621:2011 Cosmetics. Microbiology. Guidelines for the risk assessment and identification of microbiologically low-risk products
    Implementation of European Standard EN ISO 29621 by amendment to BS ISO 29621:2010
  • BS EN 61937-10:2011 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format
    Implementation of European Standard EN 61937-10 by amendment to BS IEC 61937-10:2011
  • BS EN 62363:2011 Radiation protection instrumentation. Portable photon contamination meters and monitors CORRIGENDUM 1
    Implementation of European Standard EN 62363 by amendment to BS IEC 62363:2008
  • PD CEN ISO/TR 9241-100:2011 Ergonomics of human-system interaction. Introduction to standards related to software ergonomics
    Implementation of European Standard CEN ISO/TR 9241-100 by amendment to PD ISO/TR 241-100:2010

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 1446:2001+A1:2011 Green coffee. Determination of water content. Basic reference method
    Supersedes BS 5752-1:1979
  • BS ISO 1641-2:2011 End mills and slot drills. Dimensions and designation of milling cutters with Morse taper shanks
  • BS ISO 1641-3:2011 End mills and slot drills. Dimensions and designation of milling cutters with 7/24 taper shanks
    Supersedes BS ISO 1641-3:2003
  • BS ISO 5692-3:2011 Agricultural vehicles. Mechanical connections on towed vehicles. Swivel hitch rings
  • BS ISO 6489-5:2011 Agricultural vehicles. Mechanical connections between towed and towing vehicles. Specifications for non-swivel clevis couplings
  • BS ISO 6646:2011 Rice. Determination of the potential milling yield from paddy and from husked rice
    Supersedes BS ISO 6646:2000
  • BS ISO 6750:2005 Earth-moving machinery. Operator's manual. Content and format
    Supersedes BS 6228:1985
  • BS ISO 7010:2011 Graphical symbols. Safety colours and safety signs. Registered safety signs
    Supersedes BS 5499-5:2002
  • BS ISO 7131:2009 Earth-moving machinery. Loaders. Terminology and commercial specifications
    Supersedes BS 6914-10:1998
  • BS ISO 7207-2:2011 Implants for surgery. Components for partial and total knee joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
    Supersedes BS 7251-14:1998
  • BS ISO 7768:2009 Textiles. Test method for assessing the smoothness appearance of fabrics after cleansing
    Supersedes BS ISO 7768:2006
  • BS ISO 7769:2009 Textiles. Test method for assessing the appearance of creases in fabrics after cleansing
    Supersedes BS ISO 7769:2006
  • BS ISO 9249:2007 Earth-moving machinery. Engine test code. Net power
    Supersedes BS 6911-4:1998
  • BS ISO 10302-2:2011 Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices. Structure-borne vibration measurements
  • BS ISO 10567:2007 Earth-moving machinery. Hydraulic excavators. Lift capacity
    Supersedes BS 6912-9:1992
  • BS ISO 10571:2011 Tyres for mobile cranes and similar specialized machines
    Supersedes BS AU 50-1.3.3:1996
  • BS ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
  • BS ISO 10786:2011 Space systems. Structural components and assemblies
  • BS ISO 10965:2011 Textile floor coverings. Determination of electrical resistance
    Supersedes BS ISO 10965:1998
  • BS ISO 10988:2011 Equipment for crop protection. Knapsack motorized air-assisted sprayers. Test methods and performance limits
  • BS ISO 11037:2011 Sensory analysis. Guidelines for sensory assessment of the colour of products
    Supersedes BS 5929-10:1999
  • BS ISO 11156:2011 Packaging. Accessible design. General requirements
  • BS ISO 11311:2011 Nuclear criticality safety. Critical values for homogeneous plutonium-uranium oxide fuel mixtures outside of reactors
  • BS ISO 11783-11:2011 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Mobile data element dictionary
    Supersedes BS ISO 11783-11:2007
  • BS ISO 11837:2011 Machinery for forestry. Saw chain shot guarding systems. Test method and performance criteria
  • BS ISO 12642-1:2011 Graphic technology. Input data for characterization of four-colour process printing. Initial data set
    Supersedes BS ISO 12642:1996
  • BS ISO/IEC 12905:2011 Integrated circuit cards. Enhanced terminal accessibility using cardholder preference interface
  • BS ISO 13253:2011 Ducted air-conditioners and air-to-air heat pumps. Testing and rating for performance
  • BS ISO 13527:2010 Space data and information transfer systems. XML formatted data unit (XFDU) structure and construction rules
  • BS ISO 13738:2011 Lubricants, industrial oils and related products (class L). Family E (Internal combustion engine oils). Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
    Supersedes BS ISO 13738:2000
  • BS ISO 14300-1:2011 Space systems. Programme management. Structuring of a project
  • BS ISO 15112:2011 Natural gas. Energy determination
    Supersedes BS ISO 15112:2007
  • BS ISO/IEC 15421:2010 Information technology. Automatic identification and data capture techniques. Bar code master test specifications
    Supersedes BS EN ISO/IEC 15421:2002
  • BS ISO 15686-1:2011 Buildings and constructed assets. Service life planning. General principles and framework
    Supersedes BS ISO 15686-1:2000
  • BS ISO/IEC 16262:2011 Information technology. Programming languages, their environments and system software interfaces. ECMAScript language specification
    Supersedes BS ISO/IEC 16262:2002
  • BS ISO 17566:2011 Space systems. General test documentation
  • BS ISO 17894:2005 Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications
  • BS ISO 19005-2:2011 Document management. Electronic document file format for long-term preservation. Use of ISO 32000-1 (PDF/A-2)
  • BS ISO 19012-1:2011 Microscopes. Designation of microscope objectives. Flatness of field/Plan
    Supersedes BS ISO 19012-1:2007
  • BS ISO/IEC 19794-1:2011 Information technology. Biometric data interchange formats. Framework
    Supersedes BS ISO/IEC 19794-1:2006
  • BS ISO 21072-2:2009 Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Static water conditions
  • BS ISO 21072-3:2010 Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. High viscosity oil
  • BS ISO 21927-2:2006+A1:2010 Smoke and heat control systems. Specification for natural smoke and heat exhaust ventilators
  • BS ISO 21927-3:2006+A1:2010 Smoke and heat control systems. Specification for powered smoke and heat exhaust ventilators
  • BS ISO 22488:2011 Ships and marine technology. Shipboard firefighters' outfits (protective clothing, gloves, boots and helmet)
  • BS ISO 22742:2010 Packaging. Linear bar code and two dimensional symbols for product packaging
    Supersedes BS ISO 22742:2005
  • BS ISO 22901-2:2011 Road vehicles. Open diagnostic data exchange (ODX). Emissions-related diagnostic data
  • BS ISO 23160:2011 Watch cases and accessories. Tests of the resistance to wear, scratching and impacts
  • BS ISO 23339:2010 Space systems. Unmanned spacecraft. Estimating the mass of remaining usable propellant
  • BS ISO 26430-5:2009 Digital cinema (D-cinema) operations. Security log event class and constraints (CD-ROM)
  • BS ISO/IEC 26512:2011 Systems and software engineering. Requirements for acquirers and suppliers of user documentation
    Supersedes BS ISO/IEC 15910:1999
  • BS ISO 27468:2011 Nuclear criticality safety. Evaluation of systems containing PWR UOX fuels. Bounding burnup credit approach
  • BS ISO 27852:2011 Space systems. Estimation of orbit lifetime
  • BS ISO 28600:2011 Surface chemical analysis. Data transfer format for scanning-probe microscopy
  • BS ISO/IEC 29109-9:2011 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Vascular image data
  • BS ISO 29842:2011 Sensory analysis. Methodology. Balanced incomplete block designs
  • BS ISO 29942:2011 Prophylactic dams. Requirements and test methods
  • BS IEC 60092-509:2011 Electrical installations in ships. Operation of electrical installations
  • BS IEC 61691-1-1:2011 Behavioural languages. VHDL Language reference manual
    Supersedes BS IEC 61691-1-1:2004
  • BS IEC 62232:2011 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
  • BS IEC 62530:2011 SystemVerilog. Unified hardware design, specification, and verification language
    Supersedes BS IEC 62530:2007
  • BS IEC 62615:2010 Electrostatic discharge sensitivity testing. Transmission line pulse (TLP). Component level


Published documents

  • PD ISO/TR 12471:2004 Computational structural fire design. Review of calculation models, fire tests for determining input material data and needs for further development
  • PD CEN/TR 16099:2010 Fire service equipment. Summary of water pressures specified in published CEN/TC 192 standards
  • PD ISO/IEC TR 18047-3:2011 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 13,56 MHz
    Supersedes BS ISO/IEC TR 18047-3:2004
  • PD ISO/TR 19961:2010 Cranes. Safety code on mobile cranes
  • PD IEC/TR 61000-2-5:2011 Electromagnetic compatibility (EMC). Environment. Description and classification of electromagnetic environments
  • PD IEC/TR 62368-2:2011 Audio/video, information and communication technology equipment. Explanatory information related to IEC 62368-1
  • PD IEC/TR 62669:2011 Case studies supporting IEC 62232. Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
  • PD IEC/TR 62696:2011 Luminaires. Application of the IK code IEC 62262

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 2000-19:2011 Methods of test for petroleum and its products. Determination of demulsibility characteristics of lubricating oil (Identical with IP 19/11)
    CORRIGENDUM 1
  • BS 2000-48:2011 Methods of test for petroleum and its products. Determination of oxidation characteristics of lubricating oil (Identical with IP 48/11)
    CORRIGENDUM 1
  • BS 2000-306:2011 Methods of test for petroleum and its products. Determination of oxidation stability of straight mineral oil (Identical with IP 306/11)
    CORRIGENDUM 1
  • BS 2754:1976+A1:1977 Construction of electrical equipment for protection against electric shock
    CORRIGENDUM 1
  • BS 6001-1:1999+A1:2011 (ISO 2859-1:1999) Sampling procedures for inspection by attributes. Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    AMENDMENT 1
  • BS 8204-2:2003+A2:2011 Screeds, bases and in situ floorings. Concrete wearing surfaces. Code of practice
    AMENDMENT 2
  • BS 8204-3:2004+A2:2011 Screeds, bases and in situ floorings. Polymer modified cementitious levelling screeds and wearing screeds. Code of practice
    AMENDMENT 2
  • BS 8204-4:2004+A1:2011 Screeds, bases and in situ floorings. Cementitious terrazzo wearing surfaces. Code of practice
    AMENDMENT 1
  • BS 8204-5:2004+A1:2011 Screeds, bases and in situ floorings. Mastic asphalt underlays and wearing surfaces. Code of practice
    AMENDMENT 1
  • BS EN 131-1:2007+A1:2011 Ladders. Terms, types, functional sizes
    AMENDMENT 1
  • BS EN 480-1:2006+A1:2011 Admixtures for concrete, mortar and grout. Test methods. Reference concrete and reference mortar for testing
    AMENDMENT 1
  • BS EN 480-13:2009+A1:2011 Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures
    AMENDMENT 1
  • BS EN 593:2009+A1:2011 Industrial valves. Metallic butterfly valves
    AMENDMENT 1
  • BS EN 972:1998+A1:2010 Tannery machines. Reciprocating roller machines. Safety requirements
    CORRIGENDUM 1
  • BS EN 998-2:2010 Specification for mortar for masonry. Masonry mortar
    CORRIGENDUM 1
  • BS EN 1996-1-2:2005 Eurocode 6. Design of masonry structures. General rules. Structural fire design
    CORRIGENDUM 1
  • BS EN ISO 4254-5:2009 Agricultural machinery. Safety. Power-driven soil-working machines
    CORRIGENDUM 2
  • BS EN ISO 7751:1997+A1:2011 Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
    AMENDMENT 1
  • BS EN ISO 9905:1998+A1:2011 Technical specifications for centrifugal pumps. Class I
    AMENDMENT 1
  • BS EN ISO 9908:1998+A1:2011 Technical specifications for centrifugal pumps. Class III
    AMENDMENT 1
  • BS EN 10244-1:2009 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
    CORRIGENDUM 1
  • BS EN ISO 11260:2011 Soil quality. Determination of effective cation exchange capacity and base saturation level using barium chloride solution
    CORRIGENDUM 2
  • BS EN ISO 11664-1:2011 Colorimetry. CIE standard colorimetric observers
    CORRIGENDUM 1
  • BS EN ISO 12402-9:2006+A1:2011 Personal flotation devices. Test methods
    AMENDMENT 1
  • BS EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates. Product standard. Products without fire resistance or smoke control characteristics
    AMENDMENT 1
  • BS EN 13353:2008+A1:2011 Solid wood panels (SWP). Requirements
    AMENDMENT 1
  • BS EN 13598-2:2009 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for manholes and inspection chambers in traffic areas and deep underground installations
    CORRIGENDUM 2
  • BS EN 13869:2002+A1:2011 Lighters. Child-resistance for lighters. Safety requirements and test methods
    AMENDMENT 1
  • BS EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds. Determination of the maximum explosion pressure pmax of dust clouds
    AMENDMENT 1
  • BS EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds. Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds
    AMENDMENT 1
  • BS EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds. Determination of the limiting oxygen concentration LOC of dust clouds
    AMENDMENT 1
  • BS EN ISO 14125:1998+A1:2011 Fibre-reinforced plastic composites. Determination of flexural properties
    AMENDMENT 1
  • BS EN ISO 15175:2011 Soil quality. Characterization of soil related to groundwater protection
    CORRIGENDUM 1
  • BS EN ISO 15197:2003 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self testing in managing diabetes mellitus
    CORRIGENDUM 2
  • BS EN ISO 15415:2005 Information technology. Automatic identification and data capture techniques. Bar code print quality test specification. Two dimensional symbols
    CORRIGENDUM 2
  • BS EN ISO/IEC 15426-2:2006 Information technology. Automatic identification and data capture techniques.Bar code verifier conformance specification. Two dimensional symbols
    CORRIGENDUM 2
  • BS EN 15595:2009+A1:2011 Railway applications. Braking. Wheel slide protection
    AMENDMENT 1
  • BS EN ISO 16072:2011 Soil quality. Laboratory methods for determination of microbial soil respiration
    CORRIGENDUM 1
  • BS EN ISO 16212:2011 Cosmetics. Microbiology. Enumeration of yeast and mould
    CORRIGENDUM 1
  • BS EN ISO 18415:2011 Cosmetics. Microbiology. Detection of specified and non-specified microorganisms
    CORRIGENDUM 1
  • BS EN ISO 19110:2006+A1:2011 Geographic information. Methodology for feature cataloguing
    AMENDMENT 1
  • BS EN ISO 19258:2011 Soil quality. Guidance on the determination of background values
    CORRIGENDUM 1
  • PD CEN ISO/TR 20174:2005 Welding. Grouping systems for materials. Japanese materials
    CORRIGENDUM 1
  • BS EN ISO 21003-2:2008+A1:2011 Multilayer piping systems for hot and cold water installations inside buildings. Pipes
    AMENDMENT 1
  • BS EN ISO 21671:2006+A1:2011 Dentistry. Rotary polishers
    AMENDMENT 1
  • BS EN ISO 22030:2011 Soil quality. Biological methods. Chronic toxicity in higher plants
    CORRIGENDUM 1
  • BS EN ISO 22892:2011 Soil quality. Guidelines for the identification of target compounds by gas chromatography and mass spectrometry
    CORRIGENDUM 1
  • BS EN ISO 23470:2011 Soil quality. Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution
    CORRIGENDUM 1
  • BS EN ISO 28927-10:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Percussive drills, hammers and breakers
    CORRIGENDUM 1
  • BS EN ISO 29621:2011 Cosmetics. Microbiology. Guidelines for the risk assessment and identification of microbiologically low-risk products
    CORRIGENDUM 1
  • BS EN 50122-1:2011+A1:2011 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Protective provisions against electric shock
    AMENDMENT 1
  • BS EN 50131-5-3:2005+A1:2008 Alarm systems. Intrusion systems. Requirements for interconnections equipment using radio frequency techniques
    CORRIGENDUM 1
  • BS EN 50173-5:2007+A1:2010 Information technology. Generic cabling systems. Data centres
    CORRIGENDUM 1
  • BS EN 50174-2:2009+A1:2011 Information technology. Cabling installation. Installation planning and practices inside buildings
    AMENDMENT 1 AND CORRIGENDUM 1
  • BS EN 55024:2010 Information technology equipment. Immunity characteristics. Limits and methods of measurement
    CORRIGENDUM 1
  • BS EN 60079-1:2007 Explosive atmospheres. Equipment protection by flameproof enclosures “d”
    CORRIGENDUM 1
  • BS EN 60079-29-4:2010 Explosive atmospheres. Gas detectors. Performance requirements of open path detectors for flammable gases
    CORRIGENDUM 1
  • BS EN 60127-1:2006+A1:2011 Miniature fuses. Definitions for miniature fuses and general requirements for miniature fuselinks
    AMENDMENT 1
  • BS EN 60335-2-24:2003+A2:2007 Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
    CORRIGENDUM 2
  • BS EN 60335-2-75:2004+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for commercial dispensing appliances and vending machines
    AMENDMENT 2
  • BS EN 60400:2008+A1:2011 Lampholders for tubular fluorescent lamps and starterholders
    AMENDMENT 1
  • BS EN 60670-1:2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. General requirements
    CORRIGENDUM 3
  • BS EN 60745-2-21:2009+A1:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners
    AMENDMENT 1
  • BS EN 60747-16-4:2004+A1:2011 Semiconductor devices. Microwave integrated circuits. Switches
    AMENDMENT 1
  • BS EN 60825-4:2006+A2:2011 Safety of laser products. Laser guards
    AMENDMENT 2
  • BS EN 60838-1:2004+A2:2011 Miscellaneous lampholders. General requirements and tests
    AMENDMENT 2
  • BS EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
    CORRIGENDUM 1
  • BS EN 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for testing and measuring circuits
    CORRIGENDUM 1
  • BS EN 61158-2:2008 Industrial communication networks. Fieldbus specifications. Physical layer specification and service definition
    CORRIGENDUM 1
  • BS EN 61158-3-16:2008 Industrial communication networks. Fieldbus specifications. Data-link layer service definition. Type 16 elements
    CORRIGENDUM 1
  • BS EN 61300-2-12:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Impact
    CORRIGENDUM 1
  • BS EN 61300-2-47:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Thermal shocks
    CORRIGENDUM 1
  • BS EN 61347-1:2008+A1:2011 Lamp controlgear. General and safety requirements
    AMENDMENT 1
  • BS EN 61347-2-4:2001 (IEC 61347-2-4:2000) Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for general lighting
    CORRIGENDUM 2
  • BS EN 61347-2-5:2001 (IEC 61347-2-5:2000) Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for public transport lighting
    CORRIGENDUM 2
  • BS EN 61347-2-6:2001 (IEC 61347-2-6:2000) Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for aircraft lighting
    CORRIGENDUM 2
  • BS EN 61347-2-9:2001+A2:2006 (IEC 61347-2-9:2000) Lamp controlgear. Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
    CORRIGENDUM 2
  • BS EN 61347-2-11:2002 (IEC 61347-2-11:2001) Lamp controlgear. Particular requirements for miscellaneous electronic circuits used with luminaires
    CORRIGENDUM 1
  • BS EN 61347-2-13:2006 Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic controlgear for LED modules
    CORRIGENDUM 2
  • BS EN 61591:1997+A2:2011 (IEC 61591:1997) Household range hoods and other cooking fume extractors. Methods for measuring performance
    AMENDMENT 2
  • BS EN 61834-4:1998+A1:2011 Recording Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems). Pack header table and contents
    AMENDMENT 1
  • BS EN 61937-10:2011 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format
    CORRIGENDUM 1
  • BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems. General requirements
    CORRIGENDUM 1
  • BS EN 62363:2011 Radiation protection instrumentation. Portable photon contamination meters and monitors
    CORRIGENDUM 1
  • BS ISO 3987:2010 (BS 2000-163:2010) Petroleum products. Determination of sulfated ash in lubricating oils and additives
    CORRIGENDUM 1
  • PD CEN ISO/TR 9241-100:2011 Ergonomics of human-system interaction. Introduction to standards related to software ergonomics
    CORRIGENDUM 1
  • DD ISO/TS 13399-4:2007 Cutting tool data representation and exchange. Reference dictionary for adaptive items
    CORRIGENDUM 1
  • DD ISO/TS 13399-50:2007 Cutting tool data representation and exchange. Reference dictionary for reference systems and common concepts
    CORRIGENDUM 1
  • DD ISO/TS 13399-60:2007 Cutting tool data representation and exchange. Reference dictionary for connection systems
    CORRIGENDUM 1
  • DD ISO/TS 13399-100:2008 Cutting tool data representation and exchange. Definitions, principles and methods for reference dictionaries
    CORRIGENDUM 1
  • BS ISO 1125:1999+A1:2011 Rubber compounding ingredients. Carbon black. Determination of ash
    AMENDMENT 1
  • BS ISO 14694:2003+A1:2011 Industrial fans. Specifications for balance quality and vibration levels
    AMENDMENT 1
  • BS ISO/IEC 19784-2:2007 Information technology. Biometric application programming interface. Biometric archive function provider interface
    CORRIGENDUM 1
  • BS ISO/IEC 19794-8:2006 Information technology. Biometric data interchange formats. Finger pattern skeletal data
    CORRIGENDUM 1
  • BS ISO/IEC 24727-4:2008 Identification cards. Integrated circuit card programming interfaces. Application programming interface (API) administration
    CORRIGENDUM 1
  • BS ISO/IEC 29881:2010 Information technology. Systems and software engineering. FiSMA 1.1 functional size measurement method
    CORRIGENDUM 1
  • PD CLC/TR 50555:2010 Interruption indexes
    CORRIGENDUM 1
  • BS IEC 60748-11:2000 Semiconductor devices. Integrated circuits. Sectional specification for semiconductor integrated circuits excluding hybrid circuits
    CORRIGENDUM 2
  • BS IEC 60747-10:1991 Semiconductor devices. Generic specification for discrete devices and integrated circuits
    CORRIGENDUM 2
  • BS SP 22-27:1950+A2:2011 Specification for B.A. Washers. For aircraft purposes (primarily for instrument use)
    AMENDMENT 2

British Standards withdrawn

  • BS 598-108:2005 Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for determination of the condition of the binder on coated chippings and for measurement
    Superseded by BS 598-1:2011
  • BS 598-109:1990 Sampling and examination of bituminous mixtures for roads and other paved areas. Methods for the assessment of the compaction performance of a roller and recommended procedures for the measurement of the temperature of bituminous mixture.
    Superseded by BS 598-1:2011
  • BS 697:1986 Specification for rubber gloves for electrical purposes
    Superseded by BS EN 60903:1993
  • BS 5499-5:2002 Graphical symbols and signs. Safety signs, including fire safety signs. Signs with specific safety meanings
    Superseded by BS ISO 7010:2011
  • BS 5752-1:1979 (ISO 1446:1978) Methods of test for coffee and coffee products. Green coffee. Determination of moisture content (basic reference method)
    Superseded by BS ISO 1446:2001+A1:2011
  • BS 5834-3:1985 Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for large surface boxes
    Superseded by BS 5834-2:2011
  • BS 5929-10:1999 (ISO 11037:1999) Methods for sensory analysis of food. General guidance and test method for assessment of the colour of foods
    Superseded by BS ISO 11037:2011
  • BS 6228:1985 (ISO 6750:1984) Guide to format and content of manuals on operation and maintenance for earth-moving machinery
    Superseded by BS ISO 6750:2005
  • BS 6911-4:1998 (ISO 9249:1997) Testing earth-moving machinery. Engine test code. Net power
    Superseded by BS ISO 9249:2007
  • BS 6912-9:1992 (ISO 10567:1992) Safety of earth-moving machinery. Methods for the calculation and verification of the lift capacity of hydraulic excavators
    Superseded by BS ISO 10567:2007
  • BS 6914-10:1998 (ISO 7131:1997) Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for loaders
    Superseded by BS ISO 7131:2009
  • BS 7251-14:1998 (ISO 7207-2:1998) Orthopaedic joint prostheses. Components for Partial and total knee-joint prostheses. Articulating surfaces made of metal, ceramic and plastics materials
    Superseded by BS ISO 7207-2:2011
  • BS 7844-1:1996 Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. General requirements and requirements
    Superseded by BS EN 50541-1:2011
  • BS 7844-2:1996 Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV. Supplementary requirements for transformers
    Superseded by BS EN 50541-1:2011
  • BS EN 982:1996+A1:2008 Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
    Superseded by BS EN ISO 4413:2010
  • BS EN 983:1996+A1:2008 Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
    Superseded by BS EN ISO 4414:2010
  • BS EN ISO 1518:2001 (BS 3900-E2:1992) Paints and varnishes. Scratch test
    Superseded by BS EN ISO 1518-1:2011
  • BS EN ISO 8662-4:1995 (ISO 8662-4:1994) Hand-held portable power tools. Measurement of vibrations at the handle. Grinding machines
    Superseded by BS EN ISO 28927-1:2009 and BS EN ISO 28927-4:2010
  • BS EN ISO 8662-14:1997 Hand-held portable power tools. Measurement of vibrations at the handle. Stone-working tools and needle scalers
    Superseded by BS EN ISO 28927-9:2009 and BS EN ISO 28927-11:2011
  • BS EN ISO 9919:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
    Superseded by BS EN ISO 80601-2-61:2011
  • BS EN 10016-1:1995 Non-alloy steel rods for drawing and/or cold rolling. General requirements
    Superseded by BS EN ISO 16120-1:2011
  • BS EN 10016-2:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for general purpose rod
    Superseded by BS EN ISO 16120-2:2011
  • BS EN 10016-3:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rimmed and rimmed substitute low carbon steel rod
    Superseded by BS EN ISO 16120-3:2011
  • BS EN 10016-4:1995 Non-alloy steel rods for drawing and/or cold rolling. Specific requirements for rod for special applications
    Superseded by BS EN ISO 16120-4:2011
  • BS EN 12181:1998 Oropharyngeal airways
    Superseded by BS EN ISO 5364:2011
  • BS EN 12955:1999 Foodstuffs. Determination of aflatoxin B1, and the sum of aflatoxins B1, B2, G1 and G2 in cereals, shell-fruits and derived products. High performance liquid chromatographic
    Superseded by BS EN ISO 16050:2011
  • DD ENV 13050:2001 Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
    Superseded by BS EN 13050:2011
  • BS EN 14483-5:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion in closed systems
    Superseded by BS EN ISO 28706-5:2011
  • DD CEN/TS 14778-1:2005 Solid biofuels. Sampling. Methods for sampling
    Superseded by BS EN 14778:2011
  • DD CEN/TS 14778-2:2005 Solid biofuels. Sampling. Methods for sampling particulate material transported in lorries
    Superseded by BS EN 14778:2011
  • DD IEC/PAS 61169-39:2008 Radio-frequency connectors. Sectional specification for CQM series quick lock RF connectors
    Superseded by BS EN 61169-39:2011
  • DD IEC/PAS 61169-40:2008 Radio-frequency connectors. Sectional specification for 2.4 series R.F connectors
    Superseded by BS EN 61169-40:2011
  • DD IEC/PAS 61169-41:2009 Radio-frequency connectors. Sectional specification for CQA series quick lock R.F. coaxial connectors
    Superseded by BS EN 61169-41:2011
  • DD IEC/PAS 61784-3-18:2009 Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF SNpFAMILY
    Superseded by BS EN 61784-3-18:2011
  • BS AU 50-1.3.3:1996 (ISO 10571:1995) Specification for tyres and wheels. Tyres. Off-the-road tyres. Specification for tyres for mobile cranes and similar specialized machines
    Superseded by BS ISO 10571:2011

Published in international.