ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications
    Revised to A105/A105M-11
  • A340 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
    Reapproved, available as A340-03a(2011)
  • A367 Standard Test Methods of Chill Testing of Cast Iron
    Revised to A367-11
  • A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
    Revised to A888-11
  • A927/A927M Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
    Revised to A927/A927M-11
  • A981/A981M Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors
    Revised (with designation change) to A981/A981M-11
  • A1066/A1066M-11 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
    New standard, now available.
  • B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
    Revised to B209M-10
  • B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
    Revised to B456-11
  • B977-11 Standard Specification for Titanium and Titanium Ingots
    New standard, now available.
  • C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
    Revised to C25-11
  • C51 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
    Revised to C51-11
  • C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
    Revised to C110-11
  • C204 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
    Revised to C204-11
  • C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
    Revised to C216-11
  • C295/C295M Standard Guide for Petrographic Examination of Aggregates for Concrete
    Revised (with designation change) to C295/C295M-11
  • C494/C494M Standard Specification for Chemical Admixtures for Concrete
    Revised to C494/C494M-11
  • C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
    Revised to C496/C496M-11
  • C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
    Reapproved, available as C509-06(2011)
  • C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
    Reapproved, available as C510-05a(2011)
  • C542 Standard Specification for Lock-Strip Gaskets
    Reapproved, available as C542-05(2011)
  • C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
    Revised to C578-11
  • C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
    Reapproved, available as C639-01(2011)
  • C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
    Reapproved, available as C716-06(2011)
  • C754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
    Revised to C754-11
  • C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
    Revised to C780-11
  • C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
    Reapproved, available as C864-05(2011)
  • C869/C869M Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
    Revised (with designation change) to C869/C869M-11
  • C972 Standard Test Method for Compression-Recovery of Tape Sealant
    Reapproved, available as C972-00(2011)
  • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
    Revised to C1077-11b
  • C1083 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
    Reapproved, available as C1083-06(2011)
  • C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
    Reapproved, available as C1087-00(2011)
  • C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
    Reapproved, available as C1115-06(2011)
  • C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
    Revised to C1149-11
  • C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
    Reapproved, available as C1166-06(2011)
  • C1224 Standard Specification for Reflective Insulation for Building Applications
    Revised to C1224-11
  • C1234 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations has been reinstated, with revision to C1234-11
  • C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
    Revised to C1240-11
  • C1272 Standard Specification for Heavy Vehicular Paving Brick
    Revised to C1272-11
  • C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
    Revised to C1277-11
  • C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
    Revised to C1303/C1303M-11a
  • C1358 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
    Revised to C1358-11
  • C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
    Revised to C1359-11
  • C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
    Revised to C1382-11
  • C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
    Revised to C1425-11
  • C1438 Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
    Revised to C1438-11a
  • C1446 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
    Revised to C1446-11
  • C1451 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
    Revised to C1451-11
  • C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
    Revised to C1481-11
  • C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
    Revised to C1582/C1582M-11
  • C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
    Revised to C1585-11
  • C1693 Standard Specification for Autoclaved Aerated Concrete (AAC)
    Revised to C1693-11
  • C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
    Revised to C1707-11
  • C1736-11 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device
    New standard, now available.
  • D8 Standard Terminology Relating to Materials for Roads and Pavements
    Reinstated as D8-11
  • D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
    Revised to D86-11
  • D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
    Revised to D86-11a
  • D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures
    Revised (with designation change) to D979/D979M-11
  • D1518 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
    Revised to D1518-11a
  • D1523-00(2006) Standard Specification for Synthetic Rubber Insulation for Wire and Cable, 90°C Operation (Withdrawn 2011)
    Withdrawn with no replacement.
  • D1655 Standard Specification for Aviation Turbine Fuels
    Revised to D1655-11a
  • D1675 Standard Test Methods for Polytetrafluoroethylene Tubing
    Reapproved, available as D1675-03(2011)
  • D1676 Standard Test Methods for Film-Insulated Magnet Wire
    Reapproved, available as D1676-03(2011)
  • D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics
    Revised to D1683/D1683M-11a
  • D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    Revised to D1796-11
  • D2013/D2013M Standard Practice for Preparing Coal Samples for Analysis
    Revised to D2013/D2013M-11
  • D2203 Standard Test Method for Staining from Sealants
    Reapproved, available as D2203-01(2011)
  • D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
    Revised to D2261-11
  • D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
    Revised to D2360-11
  • D2369 Standard Test Method for Volatile Content of Coatings
    Editorially changed, available as D2369-10e1
  • D2427 Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
    Reapproved, available as D2427-06(2011)
  • D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    Revised to D2513-11a
  • D2652 Standard Terminology Relating to Activated Carbon
    Revised to D2652-11
  • D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
    Revised to D2661-11
  • D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
    Revised to D2665-11
  • D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
    Reapproved (with editorial change), available as D2709-96(2011)e1
  • D2789 Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
    Reapproved, available as D2789-95(2011)
  • D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
    Revised to D2892-11
  • D3311 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
    Revised to D3311-11
  • D3341 Standard Test Method for Lead in GasolineIodine Monochloride Method
    Reapproved, available as D3341-05(2011)
  • D3414 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
    Reapproved (with editorial change), available as D3414-98(2011)e1
  • D3744/D3744M Standard Test Method for Aggregate Durability Index
    Revised (with designation change) to D3744/D3744M-11
  • D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal
    Revised to D3910-11
  • D4006 Standard Test Method for Water in Crude Oil by Distillation
    Revised to D4006-11
  • D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
    Revised to D4007-11
  • D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
    Reapproved, available as D4057-06(2011)
  • D4058 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
    Reapproved (with editorial change), available as D4058-96(2011)e1
  • D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
    Reapproved, available as D4377-00(2011)
  • D4485 Standard Specification for Performance of Active API Service Category Engine Oils
    Revised (with title change) to D4485-11a
  • D4513 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
    Revised to D4513-11
  • D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
    Revised to D4533-11
  • D4548 Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
    Reinstated as D4548-11
  • D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
    Revised to D4587-11
  • D4725 Standard Terminology for Engine Coolants
    Revised to D4725-11
  • D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel
    Revised to D4814-11
  • D4821 Standard Guide for Carbon BlackValidation of Test Method Precision and Bias
    Editorially changed, available as D4821-07e1
  • D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
    Revised to D4928-11
  • D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke
    Reapproved, available as D4930-06(2011)
  • D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke
    Reapproved, available as D4931-06(2011)
  • D5003 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
    Reapproved, available as D5003-06a(2011)
  • D5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
    Reapproved, available as D5183-05(2011)
  • D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
    Revised to D5194-11a
  • D5340 Standard Test Method for Airport Pavement Condition Index Surveys
    Revised to D5340-11
  • D5361/D5361M Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
    Revised to D5361/D5361M-11a
  • D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
    Reapproved, available as D5402-06(2011)
  • D5438 Standard Practice for Collection of Floor Dust for Chemical Analysis
    Revised to D5438-11
  • D5619 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
    Reapproved, available as D5619-00(2011)
  • D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
    Reapproved, available as D5622-95(2011)
  • D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using A High-Frequency, Linear-Oscillation (SRV) Test Machine
    Reapproved (with editorial change), available as D5706-05(2011)e1
  • D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    Editorially changed, available as D5707-05(2011)e1
  • D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
    Revised (with title change) to D5798-11
  • D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
    Revised to D5926-11
  • D6082 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
    Revised to D6082-11
  • D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
    Revised to D6185-11
  • D6353 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
    Reapproved, available as D6353-06(2011)
  • D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
    Reapproved, available as D6482-06(2011)
  • D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
    Reapproved, available as D6549-06(2011)
  • D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
    Reapproved, available as D6595-00(2011)
  • D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
    Revised to D6615-11
  • D6627/D6627M Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
    Revised (with designation change) to D6627/D6627M-11
  • D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    Revised to D664-11
  • D6738 Standard Test Method for Precipitated SilicaVolatile Content
    Revised to D6738-11
  • D6739 Standard Test Method for SilicapH Value
    Revised to D6739-11
  • D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
    Reapproved, available as D6743-06(2011)
  • D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
    Reapproved, available as D6744-06(2011)
  • D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    Revised to D6751-11b
  • D6752/D6752M Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
    Revised (with designation change) to D6752/D6752M-11
  • D6816 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
    Reinstated as D6816-11
  • D6857/D6857M Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
    Revised to D6857/D6857M-11
  • D6922 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
    Revised to D6922-11
  • D6956 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
    Revised to D6956-11
  • D7000 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
    Revised to D7000-11
  • D7063/D7063M Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
    Revised to D7063/D7063M-11
  • D7065 Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
    Revised to D7065-11
  • D7168 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
    Revised to D7168-11
  • D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
    Reapproved, available as D7171-05(2011)
  • D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
    Revised to D7173-11
  • D7181-11 Method for Consolidated Drained Triaxial Compression Test for Soils
    New standard, now available.
  • D7203 Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor
    Revised (with title change) to D7203-11
  • D7223 Standard Specification for Aviation Certification Turbine Fuel
    Revised to D7223-11
  • D7227/D7227M Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
    Revised (with designation change) to D7227/D7227M-11
  • D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
    Revised (with title change) to D7318-11
  • D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
    Revised (with title change) to D7319-11
  • D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
    Revised (with title change) to D7328-11
  • D7344 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
    Revised to D7344-11
  • D7360-11 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
    New standard, now available.
  • D7430 Standard Practice for Mechanical Sampling of Coal
    Revised to D7430-11
  • D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
    Editorially changed, available as D7457-11e1
  • D7488 Standard Test Method for Open Time of Latex Paints
    Revised to D7488-11
  • D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
    Revised to D7566-11a
  • D7572 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil After Remediation of Process Releases
    Revised to D7572-11a
  • D7686-11 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
    New standard, now available.
  • D7689-11 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)
    New standard, now available.
  • D7716-11 Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
    New standard, now available.
  • D7717-11 Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
    New standard, now available.
  • D7730-11 Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
    New standard, now available.
  • D7736-11 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
    New standard, now available.
  • D7739-11 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
    New standard, now available.
  • D7740-11 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
    New standard, now available.
  • D7742-11 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ? n ? 18) and Octylphenol Polyethoxylates (OPnEO, 2 ? n
    New standard, now available.
  • E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
    Revised to E34-11
  • E135 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
    Revised to E135-11a
  • E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
    Revised to E139-11
  • E230/E230M Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
    Revised (with designation change) to E230/E230M-11
  • E317 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
    Revised to E317-11
  • E384 Standard Test Method for Knoop and Vickers Hardness of Materials
    Revised to E384-11
  • E390 Standard Reference Radiographs for Steel Fusion Welds
    Revised to E390-11
  • E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
    Reapproved, available as E505-01(2011)
  • E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
    Editorially changed, available as E562-08e1
  • E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
    Editorially changed, available as E580/E580M-11ae1
  • E726 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
    Reapproved (with editorial change), available as E726-01(2011)e1
  • E760 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
    Reapproved, available as E760-92(2011)
  • E761 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
    Reapproved, available as E761-92(2011)
  • E769-85(2004) Standard Test Methods for Odor of Methanol, Ethanol, n-Propanol, and Isopropanol
    Withdrawn with no replacement.
  • E1001 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
    Revised to E1001-11
  • E1075-85(2004) Standard Test Methods for Odor of Ethylene Glycol, Diethylene Glycol, Triethylene Glycol, Propylene Glycol, and Dipropylene Glycol and Taste of Propylene Glycol
    Withdrawn with no replacement.
  • E1142 Standard Terminology Relating to Thermophysical Properties
    Revised to E1142-11b
  • E1269 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    Revised to E1269-11
  • E1324 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
    Revised (with title change) to E1324-11
  • E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    Revised to E1354-11a
  • E1472-07 Standard Guide for Documenting Computer Software for Fire Models (Withdrawn 2011)
    Withdrawn with no replacement.
  • E1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
    Reapproved, available as E1648-95(2011)
  • E1656/E1656M Standard Guide for Classification of Automated Pavement Condition Survey Equipment
    Revised (with designation change) to E1656/E1656M-11
  • E1732 Standard Terminology Relating to Forensic Science
    Revised to E1732-11
  • E1820 Standard Test Method for Measurement of Fracture Toughness
    Revised to E1820-11
  • E1895-07 Standard Guide for Determining Uses and Limitations of Deterministic Fire Models (Withdrawn 2011)
    Withdrawn with no replacement.
  • E1903 Standard Guide for Environmental Site Assessments: Phase II Environmental Site Assessment Process
    Revised to E1903-11
  • E1959 Standard Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions
    Reapproved, available as E1959-05(2011)
  • E2091 Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
    Revised to E2091-11
  • E2117 Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
    Reapproved, available as E2117-06(2011)
  • E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
    Revised to E2266-11
  • E2344 Standard Guide for Data Capture through the Dictation Process
    Reapproved, available as E2344-04(2011)
  • E2396 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
    Revised to E2396-11
  • E2397 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
    Revised to E2397-11
  • E2398 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems
    Revised to E2398-11
  • E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems
    Revised (with title change) to E2399-11
  • E2402 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
    Revised to E2402-11
  • E2405-05 Standard Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen (Withdrawn 2011)
    Withdrawn with no replacement.
  • E2432 Standard Guide for General Principles of Sustainability Relative to Buildings
    Revised to E2432-11
  • E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
    Editorially changed, available as E2465-11e1
  • E2502 Standard Guide for Medical Transcription Workstations
    Reapproved, available as E2502-06(2011)
  • E2516 Standard Classification for Cost Estimate Classification System
    Revised to E2516-11
  • E2589 Standard Terminology Relating to Nonsieving Methods of Powder Characterization
    Revised to E2589-11
  • E2694 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
    Revised to E2694-11
  • E2768-11 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
    New standard, now available.
  • E2831/E2831M-11 Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
    New standard, now available.
  • F472 Standard Terminology for Geometry of Alpine Skis
    Revised to F472-11
  • F645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
    Revised to F645-11
  • F948 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
    Reapproved, available as F948-94(2011)
  • F977 Standard Consumer Safety Specification for Infant Walkers
    Revised to F977-11
  • F1025 Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
    Reapproved, available as F1025-94(2011)
  • F1064 Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
    Revised to F1064-11
  • F1217 Standard Specification for Cooker, Steam
    Revised to F1217-11
  • F1411 Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
    Revised to F1411-11
  • F1417 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
    Revised to F1417-11a
  • F1588 Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
    Reapproved, available as F1588-96(2011)
  • F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
    Revised to F1869-11
  • F1870 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
    Revised to F1870-11
  • F1964 Standard Test Method for Performance of Pressure Fryers
    Revised (with title change) to F1964-11
  • F2049 Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
    Revised to F2049-11
  • F2077 Test Methods For Intervertebral Body Fusion Devices
    Revised to F2077-11
  • F2182 Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
    Revised to F2182-11a
  • F2306/F2306M Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
    Revised to F2306/F2306M-11
  • F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)
    Withdrawn with no replacement.
  • F2358-04 Standard Guide for Measuring Characteristics of Sapphire Substrates
    Withdrawn with no replacement.
  • F2412 Standard Test Methods for Foot Protection
    Revised to F2412-11
  • F2413 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
    Revised (with title change) to F2413-11
  • F2423 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
    Revised to F2423-11
  • F2640 Standard Consumer Safety Specification for Booster Seats
    Revised to F2640-11
  • F2648/F2648M Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
    Revised to F2648/F2648M-11
  • F2865-11 Standard Guide for Classifying the Degrees of Ingression Protection Provided by a Membrane Switch
    New standard, now available.
  • F2866 Standard Test Method for Flammability of a Membrane Switch in Defined Assembly
    Revised to F2866-11
  • F2892-11 Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
    New standard, now available.
  • F2912-11 Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
    New standard, now available.
  • F2916-11 Standard Practice for Environmental Impact Analysis of Commercial Food Service Equipment
    New standard, now available.
  • G7/G7M Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
    Revised (with designation change) to G7/G7M-11
  • G85 Standard Practice for Modified Salt Spray (Fog) Testing
    Revised to G85-11
  • G166 Standard Guide for Statistical Analysis of Service Life Data
    Reapproved, available as G166-00(2011)
  • G179 Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
    Reapproved, available as G179-04(2011)
  • G207-11 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
    New standard, now available.

Published in international.