ISO PUBLICATIONS

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 776:2011 (Edition 3) Pulps. Determination of acid-insoluble ash
  • ISO/IWA 9:2011 Framework for managing sustainable development in business districts
  • ISO 1580:2011 (Edition 3) Slotted pan head screws. Product grade A
  • ISO 1853:2011 (Edition 3) Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
  • ISO 2009:2011 (Edition 4) Slotted countersunk flat head screws. Product grade A
  • ISO 2010:2011 (Edition 4) Slotted raised countersunk head screws. Product grade A
  • ISO 2238:2011 (Edition 2) Machine bridge reamers
  • ISO 3598:2011 (Edition 3) Textile glass. Yarns. Basis for a specification
  • ISO 3632-1:2011 (Edition 2) Spices. Saffron (Crocus sativus L.) Specification
  • ISO 3665:2011 (Edition 3) Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications
  • ISO 3781:2011 (Edition 3) Paper and board. Determination of tensile strength after immersion in water
  • ISO 3864-1:2011 CDROM (Edition 2) Graphical symbols. Safety colours and safety signs. Design principles for safety signs and safety markings
  • ISO 4223-1:2002 Definitions of some terms used in the tyre industry. Pneumatic tyres
    AMENDMENT 1:September 2011
  • ISO 4628-6:2011 (Edition 3) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by tape method
  • ISO 4671:2007 Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
    AMENDMENT 1:September 2011
  • ISO 4901:2011 (Edition 2) Reinforced plastics based on unsaturated polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
  • ISO 5600:2011 (Edition 4) Rubber. Determination of adhesion to rigid materials using conical shaped parts
  • ISO 5603:2011 (Edition 3) Rubber, vulcanized. Determination of adhesion to wire cord
  • ISO 6361-1:2011 (Edition 2) Wrought aluminium and aluminium alloys. Sheets, strips and plates. Technical conditions for inspection and delivery
  • ISO 6361-2:2011 (Edition 3) Wrought aluminium and aluminium alloys. Sheets, strips and plates. Mechanical properties
  • ISO 6361-3:2011 (Edition 2) Wrought aluminium and aluminium alloys. Sheets, strips and plates. Strips: Tolerances on shape and dimensions
  • ISO 6361-4:2011 (Edition 2) Wrought aluminium and aluminium alloys. Sheets, strips and plates. Sheets and plates: Tolerances on shape and dimensions
  • ISO 6361-5:2011 Wrought aluminium and aluminium alloys. Sheets, strips and plates. Chemical composition
  • ISO 6801:1983 Rubber or plastics hoses. Determination of volumetric expansion
    AMENDMENT 1:September 2011
  • ISO 7045:2011 (Edition 3) Pan head screws with type H or type Z cross recess. Product grade A
  • ISO 7046-1:2011 (Edition 2) Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Steel screws of property class 4.8
  • ISO 7046-2:2011 (Edition 2) Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
  • ISO 7047:2011 (Edition 3) Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
  • ISO 7203-3:2011 (Edition 2) Fire extinguishing media. Foam concentrates. Specification for low-expansion foam concentrates for top application to watermiscible liquids
  • ISO 7795:2011 (Edition 3) Cross-country skis. Ski-binding screws. Test methods
  • ISO 8224-1:2003 Traveller irrigation machines. Operational characteristics and laboratory and field test methods
    AMENDMENT 1:August 2011
  • ISO 9344:2011 (Edition 2) Microscopes. Graticules for eyepieces
  • ISO 10147:2011 (Edition 3) Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
  • ISO 10581:2011 Resilient floor coverings. Homogeneous poly(vinyl chloride) floor covering. Specification
  • ISO 10640:2011 Plastics. Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
  • ISO/IEC 10646:2011 CDROM (Edition 2) Information technology. Universal Coded Character Set (UCS)
  • ISO 10863:2011 Non-destructive testing of welds. Ultrasonic testing. Use of time-of-flight diffraction technique (TOFD)
  • ISO/TS 10868:2011 Nanotechnologies. Characterization of singlewall carbon nanotubes using ultraviolet-visible near infrared (UV-Vis-NIR) absorption spectroscopy
  • ISO 11707:2011 Magnesium and its alloys. Determination of lead and cadmium
  • ISO 12090-1:2011 Rolling bearings. Profiled rail guides for linear motion rolling bearings. Boundary dimensions and tolerances for series 1, 2 and 3
  • ISO 12090-2:2011 Rolling bearings. Profiled rail guides for linear motion rolling bearings. Boundary dimensions and tolerances for series 4 and 5
  • ISO 12111:2011 Metallic materials. Fatigue testing. Strain-controlled thermomechanical fatigue testing method
  • ISO 12136:2011 Reaction to fire tests. Measurement of material properties using a fire propagation apparatus
  • ISO/TR 13086-1:2011 Gas cylinders. Guidance for design of composite cylinders. Stress rupture of fibres and burst ratios related to test pressure
  • ISO 13122:2011 Ships and marine technology. Launching appliances for davit-launched liferafts
  • ISO/TS 13143-2:2011 CDROM Electronic fee collection. Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813. Abstract test suite
  • ISO 13194:2011 Box pallets. Principal requirements and test methods
  • ISO/IEC 13818-5:2005 CDROM (Edition 2) Information technology. Generic coding of moving pictures and associated audio information Software simulation
  • ISO/IEC 14143-2:2011 (Edition 2) Information technology. Software measurement. Functional size measurement. Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
  • ISO 14271:2011 (Edition 2) Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
  • ISO 14409:2011 Ships and marine technology. Ship launching air bags
  • ISO 14620-2:2011 (Edition 2) Space systems. Safety requirements. Launch site operations
  • ISO/IEC 14651:2011 CDROM (Edition 3) Information technology. International string ordering and comparison. Method for comparing character strings and description of the common template tailorable ordering
  • ISO/IEC 14882: 2011 (Edition 3) Information technology. Programming languages. C++
  • ISO 15320:2011 (Edition 2) Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract
  • ISO 15511:2011 (Edition 3) Information and documentation. International standard identifier for libraries and related organizations (ISIL)
  • ISO 15930-8:2010 Graphic technology. Prepress digital data exchange using PDF. Partial exchange of printing data using PDF 1.6 (PDF/X-5)
    CORRIGENDUM 1:September 2011
  • ISO 16063-41:2011 Methods for the calibration of vibration and shock transducers. Calibration of laser vibrometers
  • ISO 16140:2003 Microbiology of food and animal feeding stuffs. Protocol for the validation of alternative methods
    AMENDMENT 1:August 2011
  • ISO/IEC TR 16167:2011 (Edition 2) Information technology. Telecommunications and information exchange between systems. Next Generation Corporate Networks (NGCN). Emergency calls
  • ISO/TR 16475:2011 Guidelines for the repair of water-leakage cracks in concrete structures
  • ISO 16900-4:2011 Respiratory protective devices. Methods of test and test equipment. Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing
  • ISO/TS 16976-3:2011 Respiratory protective devices. Human factors. Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment
  • ISO 18132-1:2011 (Edition 2) Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank gauges. Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage
  • ISO 18132-3:2011 Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. General requirements for automatic tank gauges. Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage
  • ISO 19706:2011 (Edition 2) Guidelines for assessing the fire threat to people
  • ISO/IEC 19773:2011 Information technology. Metadata Registries (MDR) modules
  • ISO 21070:2011 Ships and marine technology. Marine environment protection. Management and handling of shipboard garbage
  • ISO/TR 21254-4:2011 Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Inspection, detection and measurement
  • ISO 22033:2011 (Edition 2) Nickel alloys. Determination of niobium. Inductively coupled plasma/atomic emission spectrometric method
  • ISO/IEC 23000-12:2010 Information technology. Multimedia application format (MPEG-A) Interactive music application format
    AMENDMENT 1:August 2011
  • ISO/IEC 23002-4:2010 Information technology. MPEG video technologies. Video tool library
    AMENDMENT 1:August 2011
  • ISO/IEC 23005-5:2011 CDROM Information technology. Media context and control. Data formats for interaction devices
  • ISO/IEC 23006-2:2011 CDROM Information technology. MPEG extensible middleware (MXM) MXM API
  • ISO/IEC 23007-3:2011 CDROM Information technology. Rich media user interfaces. Conformance and reference software
  • ISO/TR 23081-3:2011 CDROM Information and documentation. Managing metadata for records. Self-assessment method
  • ISO 24234:2004 Dentistry. Mercury and alloys for dental amalgam
    AMENDMENT 1:August 2011
  • ISO 24343-2:2011 Resilient and laminate floor coverings. Determination of indentation and residual indentation. Short-term residual indentation of resilient floor covering
  • ISO 24343-3:2011 Resilient and laminate floor coverings. Determination of indentation and residual indentation. Indentation of resilient semiflexible/ vinyl composition tiles
  • ISO 24614-2:2011 Language resource management. Word segmentation of written texts. Word segmentation for Chinese, Japanese and Korean
  • ISO 24631-6:2011 Radio frequency identification of animals. Representation of animal identification information (visual display/data transfer)
  • ISO/TR 24697:2011 Textiles and textile products. Guidelines on the determination of the precision of a standard test method by interlaboratory trials
  • ISO/IEC TR 24748-2:2011 Systems and software engineering. Life cycle management Guide to the application of ISO/IEC 15288 (System life cycle processes)
  • ISO/IEC TR 24748-3:2011 Systems and software engineering. Life cycle management. Guide to the application of ISO/IEC 12207 (Software life cycle processes)
  • ISO/IEC 24753:2011 Information technology. Radio frequency identification (RFID) for item management. Application protocol: encoding and processing rules for sensors and batteries
  • ISO/IEC 24754:2008 Information technology. Document description and processing languages. Minimum requirements for specifying document rendering systems. Feature specifications for document rendering systems
    CORRIGENDUM 1:August 2011
  • ISO/IEC 24800-5:2011 Information technology. JPSearch. Data interchange format between image repositories
  • ISO/IEC TR 26927:2011 (Edition 2) Information technology. Telecommunications and information exchange between systems. Corporate telecommunication networks. Mobility for enterprise communications
  • ISO/IEC 27035:2011 Information technology. Security techniques. Information security incident management
  • ISO 28703:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermalshock resistance of porous ceramics
  • ISO 28704:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature
  • ISO/IEC TR 29110-1:2011 Software engineering. Lifecycle profiles for Very Small Entities (VSEs). Overview
  • ISO/IEC/TR 29110-3:2011 Software engineering. Lifecycle profiles for Very Small Entities (VSEs). Assessment guide
  • ISO/IEC 29341-14-3:2011 Information technology. UPnP device architecture. Audio Video Device Control Protocol. Level 3. Media Server Device
  • ISO/IEC 29341-16-1:2011 Information technology. UPnP device architecture. Low Power Device Control Protocol. Low Power Architecture
  • ISO/IEC 29341-16-10:2011 Information technology. UPnP device architecture. Low Power Device Control Protocol. Low Power Proxy Service
  • ISO/IEC 29341-16-11:2011 Information technology. UPnP device architecture. Low Power Device Control Protocol. Low Power Service
  • ISO/IEC 29341-17-1:2011 Information technology. UPnP device architecture. Quality of Service Device Control Protocol. Level 3. Quality of Service Architecture
  • ISO/IEC 29341-17-11:2011 Information technology. UPnP device architecture. Quality of Service Device Control Protocol. Level 3. Quality of Service Manager Service
  • ISO/IEC 29341-17-12:2011 Information technology. UPnP device architecture. Quality of Service Device Control Protocol. Level 3. Quality of Service Policy Holder Service
  • ISO/IEC 29341-17-13:2011 Information technology. UPnP device architecture. Quality of Service Device Control Protocol. Level 3. Quality of Service Device Service. Underlying Technology Interfaces
  • ISO/IEC 29341-18-1:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Architecture
  • ISO/IEC 29341-18-2:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Client Service
  • ISO/IEC 29341-18-3:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Server Device
  • ISO/IEC 29341-18-4:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Discovery Agent Device
  • ISO/IEC 29341-18-10:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Inbound Connection Configuration Service
  • ISO/IEC 29341-18-11:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Discovery Agent Service
  • ISO/IEC 29341-18-12:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Discovery Agent Synchronization Service
  • ISO/IEC 29341-18-13:2011 Information technology. UPnP device architecture. Remote Access Device Control Protocol. Remote Access Transport Agent Configuration Service
  • ISO/IEC 29341-19-1:2011 Information technology. UPnP device architecture. Solar Protection Blind Device Control Protocol. Solar Protection Blind Device
  • ISO 29464:2011 Cleaning equipment for air and other gases. Terminology
  • ISO/IEC 29500 Parts 1-4:2011 CDROM (Edition 2) Information technology. Document description and processing languages. Office Open XML File Formats.
  • ISO 29845:2011 Technical product documentation. Document types
  • ISO 80601-2-13:2011 Medical electrical equipment. Particular requirements for basic safety and essential performance of an anaesthetic workstation

Published in international.