BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATIONS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 0:2011 A standard for standards. Principles of standardization
    Supersedes BS 0-1:2005 and BS 0-2:2005 which remain current
  • BS 1881-129:2011 Testing concrete. Method for determination of density of partially compacted semi-dry fresh concrete
    Supersedes BS 1881-129:1992
  • BS 6440:2011 Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification
    Supersedes BS 6440:1999
  • BS 7594:2011 Code of practice for audio-frequency induction loop systems (AFILS)
    Supersedes BS 7594:1993
  • BS 7827:2011 Code of practice for designing, specifying, maintaining and operating emergency sound systems at sports venues
    Supersedes BS 7827:1996
  • BS 7872:2011 Manned security services. Cash and valuables in transit services (collection and delivery). Code of practice
    Supersedes BS 7872:2002
  • BS 7909:2011 Code of practice for temporary electrical systems for entertainment and related purposes
    Supersedes BS 7909:2008
  • BS 8484:2011 Provision of lone worker device (LWD) services. Code of practice
    Supersedes BS 8484:2009
  • BS 8525-2:2011 Greywater systems. Domestic greywater treatment equipment. Requirements and test methods
  • BS 8534:2011 Construction procurement policies, strategies and procedures. Code of practice
  • BS 8535:2011 Railway applications. Wheelsets and bogies. Powered and non-powered axles with inboard bearings. Design method
  • BS 8564:2011 Furniture removal activities. Overseas moving services. Specification
  • BS 8905:2011 Framework for the assessment of the sustainable use of materials. Guidance

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 341:2011 Personal fall protection equipment. Descender devices for rescue
    Supersedes BS EN 341:1993
  • BS EN ISO 772:2011 Hydrometry. Vocabulary and symbols
    Supersedes BS EN ISO 772:2001
  • BS EN 1089-3:2011 Transportable gas cylinders. Gas cylinder identification (excluding LPG). Colour coding
    Supersedes BS EN 1089-3:2004
  • BS EN 1196:2011 Domestic and non-domestic gas-fired air heaters. Supplementary requirements for condensing air heaters
    Supersedes BS EN 1196:1998
  • BS EN ISO 1207:2011 Slotted cheese head screws. Product grade A
    Supersedes BS EN ISO 1207:1994
  • BS EN ISO 1479:2011 Hexagon head tapping screws
    Supersedes BS EN ISO 1479:1995
  • BS EN ISO 1481:2011 Slotted pan head tapping screws
    Supersedes BS EN ISO 1481:1995
  • BS EN ISO 1482:2011 Slotted countersunk (flat) head tapping screws
    Supersedes BS EN ISO 1482:1995
  • BS EN ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws
    Supersedes BS EN ISO 1483:1995
  • BS EN ISO 1797-1:2011 Dentistry. Shanks for rotary instruments. Shanks made of metals
    Supersedes BS EN ISO 1797-1:1995
  • BS EN 1889-1:2011 Machines for underground mines. Mobile machines working underground. Safety. Rubber tyred vehicles
    Supersedes BS EN 1889-1:2003
  • BS EN 2240-080:2011 Aerospace series. Lamps, incandescent. Lamp, code 7007-704. Product standard
  • BS EN 2240-081:2011 Aerospace series. Lamps, incandescent. Lamp, code 7070. Product standard
  • BS EN 2240-082:2011 Aerospace series. Lamps, incandescent. Lamp, code 7079. Product standard
  • BS EN 2240-083:2011 Aerospace series. Lamps, incandescent. Lamp, code 7152. Product standard
  • BS EN 2240-084:2011 Aerospace series. Lamps, incandescent. Lamp, code 7153. Product standard
  • BS EN 2240-085:2011 Aerospace series. Lamps, incandescent. Lamp, code 7265. Product standard
  • BS EN 2240-086:2011 Aerospace series. Lamps, incandescent. Lamp, code 7333. Product standard
  • BS EN 2240-087:2011 Aerospace series. Lamps, incandescent. Lamp, code 7341. Product standard
  • BS EN 2240-088:2011 Aerospace series. Lamps, incandescent. Lamp, code A7512-12. Product standard
  • BS EN 2240-089:2011 Aerospace series. Lamps, incandescent. Lamp, code A7512-24. Product standard
  • BS EN 2240-090:2011 Aerospace series. Lamps, incandescent. Lamp, code 7683. Product standard
  • BS EN 2240-091:2011 Aerospace series. Lamps, incandescent. Lamp, code 7714. Product standard
  • BS EN 2240-092:2011 Aerospace series. Lamps, incandescent. Lamp, code 7715. Product standard
  • BS EN 2240-093:2011 Aerospace series. Lamps, incandescent. Lamp, code 7839. Product standard
  • BS EN 2240-094:2011 Aerospace series. Lamps, incandescent. Lamp, code 8022. Product standard
  • BS EN 2240-095:2011 Aerospace series. Lamps, incandescent. Lamp, code 8552. Product standard
  • BS EN 2240-096:2011 Aerospace series. Lamps, incandescent. Lamp, code 72301-6. Product standard
  • BS EN 2240-097:2011 Aerospace series. Lamps, incandescent. Lamp, code 72601-12. Product standard
  • BS EN 2240-098:2011 Aerospace series. Lamps, incandescent. Lamp, code 416650. Product standard
  • BS EN 2240-099:2011 Aerospace series. Lamps, incandescent. Lamp, code 416700. Product standard
  • BS EN ISO 3759:2011 Textiles. Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
    Supersedes BS EN ISO 3759:2008
  • BS EN 4008-007:2011 Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/2-01. Product standard
    Supersedes BS EN 4008-007:2006
  • BS EN 4008-008:2011 Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Positioner for crimping tool M22520/7-01. Product standard
    Supersedes BS EN 4008-008:2006
  • BS EN ISO 4641:2011 Rubber hoses and hose assemblies for water suction and discharge. Specification
    Supersedes BS EN ISO 4641:2008
  • BS EN 4672:2011 Aerospace series. Steel FE-PM1504 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ? 300 mm
  • BS EN 4675:2011 Aerospace series. Titanium Ti-P63002 (Ti5Al5Mo5V3Cr0.4Fe). Rm ? 1300 MPa. Bars. De < 110 mm
  • BS EN 4678:2011 Aerospace series. Weldments and brazements for aerospace structures. Joints of metallic materials by laser beam welding. Quality of weldments
  • BS EN ISO 4766:2011 Slotted set screws with flat point
    Supersedes BS EN 24766:1992
  • BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
    Supersedes BS EN ISO 4787:2010
  • BS EN ISO 5459:2011 Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
    Supersedes BS ISO 5459:1981
  • BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
    Supersedes the dual numbered standard BS EN ISO 6272-1:2004, BS 3900-E13:2004
  • BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
    Supersedes BS EN ISO 6272-2:2006
  • BS EN ISO 7049:2011 Cross-recessed pan head tapping screws
    Supersedes BS EN ISO 7049:1995
  • BS EN ISO 7050:2011 Cross-recessed countersunk (flat) head tapping screws
    Supersedes BS EN ISO 7050:1995
  • BS EN ISO 7051:2011 Cross-recessed raised countersunk (oval) head tapping screws
    Supersedes BS EN ISO 7051:1995
  • BS EN ISO 7053:2011 Hexagon washer head tapping screws
    Supersedes BS 7599:1992
  • BS EN ISO 7380-1:2011 Button head screws. Hexagon socket button head screws
    Supersedes BS EN ISO 7380:2004
  • BS EN ISO 7380-2:2011 Button head screws. Hexagon socket button head screws with collar
    Supersedes BS EN ISO 7380:2004
  • BS EN ISO 7439:2011 Copper-bearing contraceptive intrauterine devices. Requirements and tests
    Supersedes BS EN ISO 7439:2009
  • BS EN ISO 7494-1:2011 Dentistry. Dental units. General requirements and test methods
    Supersedes BS EN ISO 7494-1:2005
  • BS EN ISO 9241-420:2011 Ergonomics of human-system interaction. Selection of physical input devices
    Partially supersedes BS EN ISO 9241-4:1998 and BS EN ISO 9241-9: 2000
  • BS EN ISO 9241-910:2011 Ergonomics of human-system interaction. Framework for tactile and haptic interaction
  • BS EN ISO 9311-2:2011 Adhesives for thermoplastic piping systems. Determination of shear strength
    Supersedes BS EN ISO 9311-2:2002
  • BS EN ISO 10271:2011 Dentistry. Corrosion test methods for metallic materials
    Supersedes BS EN ISO 10271:2001
  • BS EN ISO 10943:2011 Ophthalmic instruments. Indirect ophthalmoscopes
    Supersedes BS EN ISO 10943:2006
  • BS EN 12446:2011 Chimneys. Components. Concrete outer wall elements
    Supersedes BS EN 12446:2003
  • BS EN ISO 12543-1:2011 Glass in building. Laminated glass and laminated safety glass. Definitions and description of component parts
    Supersedes BS EN ISO 12543-1:1998
  • BS EN ISO 12543-2:2011 Glass in building. Laminated glass and laminated safety glass. Laminated safety glass
    Supersedes BS EN ISO 12543-2:1998
  • BS EN ISO 12543-3:2011 Glass in building. Laminated glass and laminated safety glass. Laminated glass
    Supersedes BS EN ISO 12543-3:1998
  • BS EN ISO 12543-4:2011 Glass in building. Laminated glass and laminated safety glass. Test methods for durability
    Supersedes BS EN ISO 12543-4:1998
  • BS EN ISO 12543-5:2011 Glass in building. Laminated glass and laminated safety glass. Dimensions and edge finishing
    Supersedes BS EN ISO 12543-5:1998
  • BS EN ISO 12543-6:2011 Glass in building. Laminated glass and laminated safety glass. Appearance
    Supersedes BS EN ISO 12543-6:1998
  • BS EN 12952-2:2011 Water-tube boilers and auxiliary installations. Materials for pressure parts of boilers and accessories
    Supersedes BS EN 12952-2:2001
  • BS EN 12952-4:2011 Water-tube boilers and auxiliary installations. In-service boiler life expectancy calculations
    Supersedes BS EN 12952-4:2000
  • BS EN 12952-6:2011 Water-tube boilers and auxiliary installations. Inspection during construction; documentation and marking of pressure parts of the boiler
    Supersedes BS EN 12952-6:2002
  • BS EN ISO 13079:2011 Laboratory glass and plastics ware. Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method
    Supersedes BS 2554:1987
  • BS EN ISO 13130:2011 Laboratory glassware. Desiccators
  • BS EN ISO 13132:2011 Laboratory glassware. Petri dishes
  • BS EN ISO 14006:2011 Environmental management systems. Guidelines for incorporating ecodesign
  • BS EN 14142-1:2011 Postal services. Address databases. Components of postal addresses
    Supersedes BS EN 14142-1:2003
  • BS EN 14161:2011 Petroleum and natural gas industries. Pipeline transportation systems
    Supersedes BS EN 14161:2003
  • BS EN ISO 14184-1:2011 Textiles. Determination of formaldehyde. Free and hydrolised formaldehyde (water extraction method)
    Supersedes BS EN ISO 14184-1:1999
  • BS EN ISO 14184-2:2011 Textiles. Determination of formaldehyde. Released formaldehyde (vapour absorption method)
    Supersedes BS EN ISO 14184-2:1998
  • BS EN ISO 14584:2011 Hexalobular socket raised countersunk head screws
    Supersedes BS EN ISO 14584:2001
  • BS EN 15254-5:2009 Extended application of results from fire resistance tests. Non-loadbearing walls. Metal sandwich panel construction
  • BS EN 15331:2011 Criteria for design, management and control of maintenance services for buildings
  • BS EN 15387:2011 Packaging. Flexible laminate tubes. Test methods to assess the strength of the side seam
  • BS EN 15812:2011 Polymer modified bituminous thick coatings for waterproofing. Determination of crack bridging ability
  • BS EN 15813:2011 Polymer modified bituminous thick coatings for waterproofing. Determination of flexibility at low temperatures
  • BS EN 15814:2011 Polymer modified bituminous thick coatings for waterproofing. Definitions and requirements
  • BS EN 15815:2011 Polymer modified bituminous thick coatings for waterproofing. Resistance to compression
  • BS EN 15816:2011 Polymer modified bituminous thick coatings for waterproofing. Resistance to rain
  • BS EN 15817:2011 Polymer modified bituminous thick coatings for waterproofing. Water resistance
  • BS EN 15818:2011 Polymer modified bituminous thick coatings for waterproofing. Determination of dimensional stability at high temperature
  • BS EN 15819:2011 Polymer modified bituminous thick coatings for waterproofing. Reduction of the thickness of the layer when fully dried
  • BS EN 16006:2011 Animal feeding stuffs. Determination of the sum of fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RPHPLC with fluorescence detection after pre- or postcolumn derivatisation
  • BS EN 16007:2011 Animal feeding stuffs. Determination of ochratoxin A in animal feed by immunoaffinity column clean-up and high performance liquid chromatography with fluorescence detection
  • BS EN 16014:2011 Hardware for furniture. Strength and durability of locking mechanisms
  • BS EN 16020:2011 Explosion diverters
  • BS EN 16081:2011 Hyperbaric chambers. Specific requirements for fire extinguishing systems. Performance, installation and testing
  • BS EN ISO 22118:2011 Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens. Performance characteristics
  • BS EN ISO 22119:2011 Microbiology of food and animal feeding stuffs. Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens. General requirements and definitions
  • BS EN ISO 25424:2011 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
    Supersedes BS EN 15424:2007
  • BS EN ISO 26304:2011 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels. Classification
    Supersedes BS EN ISO 26304:2009
  • BS EN ISO 26800:2011 Ergonomics. General approach, principles and concepts
  • BS EN 50130-4:2011 Alarm systems. Electromagnetic compatibility. Product family standard. Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems
    Supersedes BS EN 50130-4:1996
  • BS EN 50130-5:2011 Alarm systems. Environmental test methods
    Supersedes BS EN 50130-5:1999
  • BS EN 50536:2011 Protection against lightning. Thunderstorm warning systems
  • BS EN 60118-13:2011 Electroacoustics. Hearing aids. Electromagnetic compatibility (EMC)
    Supersedes BS EN 60118-13:2005
  • BS EN 60191-6-12:2011 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guidelines for fine-pitch land grid array (FLGA)
    Supersedes BS EN 60191-6-12:2002
  • BS EN 60212:2011 Standard conditions for use prior to and during the testing of solid electrical insulating materials
    Supersedes BS 2844:1995
  • BS EN 60269-6:2011 Low-voltage fuses. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems
  • BS EN 60512-9-3:2011 Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
    Supersedes BS EN 60512-9-3:2006
  • BS EN 60626-2:2009 Combined flexible materials for electrical insulation. Methods of test
    Supersedes BS EN 60626-2:1996 which remains current
  • BS EN 60674-3-8:2011 Plastic films for electrical purposes. Specifications for individual materials. Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
  • BS EN 60684-3-271:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
    Supersedes BS EN 60684-3-271:2004 which remains current
  • BS EN 60745-2-22:2011 Hand-held motor-operated electric tools. Safety. Particular requirements for cut-off machines
  • BS EN 60749-21:2011 Semiconductor devices. Mechanical and climatic test methods. Solderability
    Supersedes BS EN 60749-21:2005
  • BS EN 60749-29:2011 Semiconductor devices. Mechanical and climatic test methods. Latch-up test
    Supersedes BS EN 60749-29:2003
  • BS EN 61076-2-001:2011 Connectors for electronic equipment. Product requirements. Circular connectors. Blank detail specification
    Supersedes BS EN 61076-2-001:2002
  • BS EN 61076-2:2011 Connectors for electronic equipment. Product requirements. Sectional specification for circular connectors
    Supersedes BS EN 61076-2:1999
  • BS EN 61162-450:2011 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ethernet interconnection
  • BS EN 61300-1:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. General and guidance
    Supersedes BS EN 61300-1:2003
  • BS EN 61300-3-46:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Measurement. Bore diameter for guide pin in MT ferrules
  • BS EN 61477:2009 Live working. Minimum requirements for the utilization of tools, devices and equipment
    Supersedes BS EN 61477:2002
  • BS EN 61534-1:2011 Powertrack systems. General requirements
    Supersedes BS EN 61534-1:2003 which remains current
  • BS EN 61709:2011 Electric components. Reliability. Reference conditions for failure rates and stress models for conversion
    Supersedes BS EN 61709:2000
  • BS EN 61747-5-2:2011 Liquid crystal display devices. Environmental, endurance and mechanical test methods. Visual inspection of active matrix colour liquid crystal display modules
  • BS EN 61747-6-2:2011 Liquid crystal display devices. Measuring methods for liquid crystal display modules. Reflective type
  • BS EN 61812-1:2011 Time relays for industrial and residential use. Requirements and tests
    Supersedes BS EN 116000-2:1994 and BS EN 61812-1:1997
  • BS EN 61851-1:2011 Electric vehicle conductive charging system. General requirements
    Supersedes BS EN 61851-1:2001
  • BS EN 61951-2:2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Portable sealed rechargeable single cells. Nickel-metal hydride
    Supersedes BS EN 61951-2:2003 which remains current
  • BS EN 62047-5:2011 Semiconductor devices. Micro-electromechanical devices. RF MEMS switches
  • BS EN 62047-7:2011 Semiconductor devices. Micro-electromechanical devices. MEMS BAW filter and duplexer for radio frequency control and selection
  • BS EN 62047-9:2011 Semiconductor devices. Micro-electromechanical devices. Wafer to wafer bonding strength measurement for MEMS
  • BS EN 62216:2011 Digital terrestrial television receivers for the DVB-T system
    Supersedes BS EN 62216-1:2002
  • BS EN 62327:2011 Radiation protection instrumentation. Handheld instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation
  • BS EN 62343-2:2011 Dynamic modules. Reliability qualification
  • BS EN 62386-209:2011 Digital addressable lighting interface. Particular requirements for control gear. Colour control (device type 8)
  • BS EN 62520:2011 Railway applications. Electric traction. Short-primary type linear induction motors (LIM) fed by power converters
  • BS EN 62532:2011 Fluorescent induction lamps. Safety specifications
  • BS EN 62561-4:2011 Lightning protection system components (LPSC). Requirements for conductor fasteners
    Supersedes BS EN 50164-4:2008 which remains current
  • BS EN 62631-1:2011 Dielectric and resistive properties of solid insulating materials. General
    Supersedes BS 6233:1982 which remains current
  • BS EN 62660-1:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles. Performance testing
  • BS EN 62660-2:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles. Reliability and abuse testing
  • BS EN ISO 80601-2-12:2011 Medical electrical equipment. Particular requirements for basic safety and essential performance of critical care ventilators
    Supersedes the dual numbered standard BS EN 794-1:1997+A2:2009, BS 5724-2.202:1997+A2:2009 and BS EN 60601-2-12:2006

BS ENs implemented by amendment

  • BS EN ISO 14240-1:2011 (ISO 14240-1:1997) Soil quality. Determination of soil microbial biomass. Substrate-induced respiration method
    Implementation of European Standard EN ISO 14240-1 by amendment to BS 7755-4.4.1:1997
  • BS EN ISO 14240-2:2011 Soil quality. Determination of soil microbial biomass. Fumigation-extraction method
    Implementation of European Standard EN ISO 14240-2 by amendment to BS 7755-4.4.2:1997
  • BS EN ISO 16703:2011 Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
    Implementation of European Standard EN ISO 16703 by amendment to BS ISO 16703:2004
  • BS EN ISO 23611-4:2011 Soil quality. Sampling of soil invertebrates. Sampling, extraction and identification of soil inhabiting nematodes
    Implementation of European Standard EN ISO 23611-4 by amendment to BS ISO 23611-4:2007
  • BS EN ISO 25177:2011 Soil quality. Field soil description
    Implementation of European Standard EN ISO 25177 by amendment to BS ISO 25177:2008
  • BS EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
    Implementation of European Standard EN 61341 by amendment to PD IEC/TR 61341:2010
  • BS EN 62244:2011 Radiation protection instrumentation. Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
    Implementation of European Standard EN 62244 by amendment to BS IEC 62244:2006

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 1174-1:2011 Assembly tools for screws and nuts. Driving squares. Driving squares for hand socket tools
  • BS ISO 1352:2011 Metallic materials. Torque-controlled fatigue testing
  • BS ISO 2303:2011 Isoprene rubber (IR). Non-oil-extended, solution-polymerized types Evaluation procedures
    Supersedes BS ISO 2303:2003
  • BS ISO 3864-4:2011 Graphical symbols. Safety colours and safety signs. Colorimetric and photometric properties of safety sign materials
    Supersedes BS 5378-2:1980
  • BS ISO 3951-4:2011 (BS 6002-5:2011) Sampling procedures for inspection by variables. Procedures for assessment of declared quality levels
  • BS ISO 5794-3:2011 Rubber compounding ingredients. Silica, precipitated, hydrated. Evaluation procedures in a blend of solution styrene-butadiene rubber (SSBR) and butadiene rubber (BR)
  • BS ISO 5834-2:2011 Implants for surgery. Ultra-high-molecular weight polyethylene. Moulded forms
    Supersedes BS ISO 5834-2:2006
  • BS ISO 6627:2011 Internal combustion engines. Piston rings. Expander/segment oil-control rings
  • BS ISO 7005-1:2011 Pipe flanges. Steel flanges for industrial and general service piping systems
  • BS ISO 7626-1:2011 Mechanical vibration and shock. Experimental determination of mechanical mobility. Basic terms and definitions, and transducer specifications
    Supersedes BS 6897-1:1987
  • BS ISO/IEC 9075 1-4,9-11,13-14:2010 Information technology. Database languages. SQL. Various parts (CD-ROM)
    This British Standard is the UK implementation of ISO/IEC 9075: 2008 Parts 1-4, 9-11 and 13-14 including Technical Corrigenda.
  • BS ISO/IEC 10373-9:2011 Identification cards. Test methods. Optical memory cards. Holographic recording method
  • BS ISO 10794:2011 Space systems. Programme management. Material, mechanical parts and processes
  • BS ISO 10795:2011 Space systems. Programme management and quality. Vocabulary
  • BS ISO 10830:2011 Space systems. Non-destructive testing. Automatic ultrasonic inspection method of graphite ingot for solid rocket motors
  • BS ISO 10845-1:2010 Construction procurement. Processes, methods and procedures
  • BS ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding
  • BS ISO 11221:2011 Space systems. Space solar panels. Spacecraft charging induced electrostatic discharge test methods
  • BS ISO 12405-1:2011 Electrically propelled road vehicles. Test specification for lithium-ion traction battery packs and systems. High-power applications
  • BS ISO 12493:2011 Rubber, vulcanized. Determination of stress in tension upon heating
  • BS ISO 12809:2011 Crop protection equipment. Reciprocating positive displacement pumps and centrifugal pumps. Test methods
  • BS ISO 12877:2011 Traceability of finfish products. Specification on the information to be recorded in farmed finfish distribution chains
  • BS ISO 13043:2011 Road vehicles. Refrigerant systems used in mobile air conditioning systems (MAC). Safety requirements
  • BS ISO 13053-1:2011 Quantitative methods in process improvement. Six Sigma. DMAIC methodology
  • BS ISO 13053-2:2011 Quantitative methods in process improvement. Six Sigma. Tools and techniques
  • BS ISO 14701:2011 Surface chemical analysis. X-ray photoelectron spectroscopy. Measurement of silicon oxide thickness
  • BS ISO 15222:2011 Truck and bus tyres. Method for measuring relative wet grip performance. Loaded new tyres
  • BS ISO/IEC 15944-1:2011 Information technology. Business operational view. Operational aspects of Open-edi for implementation
    Supersedes BS ISO/IEC 15944-1:2002
  • BS ISO 16000-18:2011 Indoor air. Detection and enumeration of moulds. Sampling by impaction
  • BS ISO 16000-25:2011 Indoor air. Determination of the emission of semi-volatile organic compounds by building products. Micro-chamber method
  • BS ISO 16001:2008 Earth-moving machinery. Hazard detection systems and visual aids. Performance requirements and tests
  • BS ISO 16121-2:2011 Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Visibility
    Supersedes BS ISO 16121-2:2005
  • BS ISO 16121-3:2011 Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Information devices and controls
    Supersedes BS ISO 16121-3:2005
  • BS ISO 16121-4:2011 Road vehicles. Ergonomic requirements for the driver's workplace in line-service buses. Cabin environment
    Supersedes BS ISO 16121-4:2005
  • BS ISO/IEC 19756:2011 Information technology. Topic maps. Constraint language (TMCL)
  • BS ISO 20712-3:2008 Water safety signs and beach safety flags. Guidance for use
    Supersedes BS 8504-1:2006 and BS 8504-2:2006
  • BS ISO 21927-10:2011 Smoke and heat control systems. Specification for power output devices
  • BS ISO 22072:2011 Aerospace. Electrohydrostatic actuator (EHA). Characteristics to be defined in procurement specifications
    Supersedes BS ISO 22072:2005
  • BS ISO 22196:2011 Measurement of antibacterial activity on plastics and other non-porous surfaces
    Supersedes BS ISO 22196:2007
  • BS ISO 24415-2:2011 Tips for assistive products for walking. Requirements and test methods. Durability of tips for crutches
  • BS ISO 25964-1:2011 Information and documentation. Thesauri and interoperability with other vocabularies. Thesauri for information retrieval
    Supersedes BS 8723-2:2005 and DD 8723-5:2008 which are withdrawn. Supersedes BS 8723-1:2005 and BS 8723-4:2007 which remain current
  • BS ISO 27667:2011 Road vehicles. Brake lining friction materials. Evaluation of corrosion effects on painted backing plates and brake shoes
  • BS ISO 27893:2011 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
  • BS ISO 27911:2011 Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
  • BS ISO 28002:2011 Security management systems for the supply chain. Development of resilience in the supply chain. Requirements with guidance for use
  • BS ISO 28540:2011 Water quality. Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water. Method using gas chromatography with mass spectrometric detection (GC-MS)
  • BS ISO/IEC 29102:2011 Information technology. Office equipment. Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components
  • BS ISO 29282:2011 Intelligent transport systems. Communications access for land mobiles (CALM). Satellite networks
  • BS IEC 62016:2003 Core model of the electronics domain
  • BS IEC 62613-1:2011 Plugs, socket-outlets and ship couplers for highvoltage shore connection systems (HVSCSystems). General requirements


Published documents

  • PD CEN/TR 15449:2011 Geographic information. Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures
    Supersedes PD CEN/TR 15449:2006
  • PD CEN/TR 16219:2011 Electronic fee collection. Value added services based on EFC on-board equipment
  • PD CEN/TR 16239:2011 Installation rules of fibrous (gypsum) plaster works
  • PD ISO/TR 14105:2011 Document management. Change management for successful electronic document management system (EDMS) implementation
  • PD ISO/TR 14187:2011 Surface chemical analysis. Characterization of nanostructured materials
  • PD ISO/IEC TR 19075-1:2011 Information technology. Database languages. SQL technical reports. XQuery regular expression support in SQL
  • PD IEC/TR 62048:2011 Optical fibres. Reliability. Power law theory
    Supersedes PD IEC TR 62048:2002
  • PD IEC/TR 62544:2011 High-voltage direct current (HVDC) systems. Application of active filters
    Supersedes DD IEC/PAS 62544:2008

Publicly available specifications

Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 71:2011 Nanoparticles. Vocabulary
    Supersedes PAS 71:2005
  • PAS 93:2011 Characterization of human cells for clinical applications. Guide

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS EN ISO 139:2005+A1:2011 Textiles. Standard atmospheres for conditioning and testing
    AMENDMENT 1
  • BS EN 1090-2:2008+A1:2011 Execution of steel structures and aluminium structures. Technical requirements for steel structures
    AMENDMENT 1
  • BS EN 1591-1:2001+A1:2009 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method
    CORRIGENDUM 1
  • BS EN 1858:2008+A1:2011 Chimneys. Components. Concrete flue blocks
    AMENDMENT 1
  • BS EN 1992-1-1:2004 Eurocode 2. Design of concrete structures. General rules and rules for buildings
    CORRIGENDUM 2
  • BS EN ISO 11600:2003+A1:2011 Building construction. Jointing products. Classification and requirements for sealants
    AMENDMENT 1
  • BS EN 12561-2:2011 Railway applications. Tank wagons. Bottom emptying devices for liquid products including vapour return
    CORRIGENDUM 1
  • BS EN 12561-8:2011 Railway applications. Tank wagons. Heating connections
    CORRIGENDUM 1
  • BS EN ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
    CORRIGENDUM 1
  • BS EN 13050:2011 Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
    CORRIGENDUM 1
  • BS EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds. Determination of the lower explosion limit LEL of dust clouds
    AMENDMENT 1
  • BS EN ISO 14240-1:2011 (ISO 14240-1:1997) Soil quality. Determination of soil microbial biomass. Substrate-induced respiration method
    CORRIGENDUM 1
  • BS EN ISO 14240-2:2011 Soil quality. Determination of soil microbial biomass. Fumigation-extraction method
    CORRIGENDUM 1
  • BS EN ISO 15912:2006+A1:2011 Dentistry. Casting investments and refractory die materials
    AMENDMENT 1
  • BS EN ISO 16703:2011 Soil quality. Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography
    CORRIGENDUM 1
  • BS EN ISO 19119:2006+A1:2011 Geographic information. Services
    AMENDMENT 1
  • BS EN ISO 23611-4:2011 Soil quality. Sampling of soil invertebrates. Sampling, extraction and identification of soil inhabiting nematodes
    CORRIGENDUM 1
  • BS EN ISO 25177:2011 Soil quality. Field soil description
    CORRIGENDUM 1
  • BS EN 50173-2:2007+A1:2010 Information technology. Generic cabling systems. Office premises
    CORRIGENDUM 1
  • BS EN 50173-4:2007+A1:2010 Information technology. Generic cabling systems. Homes
    CORRIGENDUM 1
  • BS EN 60335-2-25:2002+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for microwave ovens, including combination microwave ovens
    CENELEC AMENDMENT 11
  • BS EN 60598-2-3:2003+A1:2011 Luminaires. Particular requirements. Luminaires for road and street lighting
    AMENDMENT 1
  • BS EN 60950-1:2006+A12:2011 Information technology equipment. Safety. General requirements
    CORRIGENDUM 4
  • BS EN 61029-2-4:2011 Safety of transportable motor-operated electric tools. Particular requirements for bench grinders
    CORRIGENDUM 1
  • BS EN 61341:2011 Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
    CORRIGENDUM 1
  • BS EN 62115:2005+A2:2011 Electric toys. Safety
    AMENDMENT 2
  • BS EN 62244:2011 Radiation protection instrumentation. Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
    CORRIGENDUM 1
  • BS ISO 1125:1999+A1:2011 Rubber compounding ingredients. Carbon black. Determination of ash
    CORRIGENDUM 1
  • BS ISO 80000-9:2009+A1:2011 Quantities and units. Physical chemistry and molecular physics
    AMENDMENT 1
  • PAS 24:2007+A2:2011 Enhanced security performance requirements for door assemblies. Single and double leaf, hinged external door assemblies to dwellings
    AMENDMENT 2

British Standards withdrawn

  • BS 2554:1987 Specification for Westergren tubes and support for the measurement of erythrocyte sedimentation rate
    Superseded by BS EN ISO 13079:2011
  • BS 2844:1995 (IEC 60212:1971) Standard conditions for use prior to and during the testing of solid electrical insulating materials
    Superseded by BS EN 60212:2011
  • BS 5378-2:1980 Safety signs and colours. Specification for colorimetric and photometric properties of materials
    Superseded by BS ISO 3864-4:2011
  • BS 6132:1983 Code of practice for safe operation of alkaline secondary cells and batteries
    Superseded by BS EN 50272-1:2010
  • BS 6133:1995 Code of practice for safe operation of lead-acid stationary batteries
    Superseded by BS EN 50272-1:2010
  • BS 6897-1:1987 (ISO 7626-1:1986) Experimental determination of mechanical mobility. Specification for transducers
    Superseded by BS ISO 7626-1:2011
  • BS 7599:1992 (ISO 7053:1992) Specification for hexagon washer head tapping screws
    Superseded by BS EN ISO 7053:2011
  • BS 8504-1:2006 Beach safety flags. Colour, shape and meaning
    Superseded by BS ISO 20712-3:2008
  • BS 8504-2:2006 Beach safety flags. Materials. Requirements and test methods
    Superseded by BS ISO 20712-3:2008
  • BS 8723-2:2005 Structured vocabularies for information retrieval. Guide. Thesauri
    Superseded by BS ISO 25964-1:2011
  • DD 8723-5:2008 Structured vocabularies for information retrieval. Guide. Exchange formats and protocols for interoperability
    Superseded by BS ISO 25964-1:2011
  • BS EN 794-1:1997+A2:2009 (BS 5724-2.202:1997+A2:2009) Lung ventilators
    Superseded by BS EN ISO 80601-2-12:2011
  • BS EN ISO 7380:2004 Hexagon socket button head screws
    Superseded by BS EN ISO 7380-1:2011 and BS EN ISO 7380-2:2011
  • BS EN 15424:2007 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical
    Superseded by BS EN ISO 25424:2011
  • BS EN 24766:1992 (ISO 4766:1983) Slotted set screws with flat point
    Superseded by BS EN ISO 4766:2011
  • BS EN 60335-2-27:2003 Specification for safety of household and similar electrical appliances. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
    Superseded by BS EN 60335-2-27:2010
  • BS EN 60601-2-12:2006 Medical electrical equipment. Particular requirements for the safety of lung ventilators. Critical care ventilators
    Superseded by BS EN ISO 80601-2-12:2011
  • BS EN 60921:1991 Specification for ballasts for tubular fluorescent lamps. Performance requirements
    Superseded by BS EN 60921:2004
  • BS EN 60927:1997 Specification for auxiliaries for lamps. Starting devices (other than glow starters). Performance requirements
    Superseded by BS EN 60927:2007
  • BS EN 62216-1:2002 Digital terrestrial television receivers for the DVB-T system. Baseline receiver specification
    Superseded by BS EN 62216:2011
  • BS EN 116000-2:1994 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. Generic data and methods of test for time
    Superseded by BS EN 61812-1:2011
  • DD IEC/PAS 62544:2008 Active filters in HVDC applications
    Superseded by PD IEC/TR 62544:2011

Published in international.