ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A159 Standard Specification for Automotive Gray Iron Castings
    Reapproved, available as A159-83(2011)
  • A197/A197M Standard Specification for Cupola Malleable Iron
    Reapproved, available as A197/A197M-00(2011)
  • A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
    Reapproved, available as A278/A278M-01(2011)
  • A319 Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts
    Reapproved, available as A319-71(2011)
  • A436 Standard Specification for Austenitic Gray Iron Castings
    Reapproved, available as A436-84(2011)
  • A571/A571M Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
    Reapproved, available as A571/A571M-01(2011)
  • A627 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
    Reapproved, available as A627-03(2011)
  • A772/A772M Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current
    Reapproved (with editorial change), available as A772/A772M-00(2011)e1
  • B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
    Revised to B265-11
  • B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems
    Reinstated as B345/B345M-11
  • B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
    Revised to B600-11
  • C33/C33M Standard Specification for Concrete Aggregates
    Revised to C33/C33M-11a
  • C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
    Revised to C39/C39M-11
  • C94/C94M Standard Specification for Ready-Mixed Concrete
    Revised to C94/C94M-11b
  • C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement
    Revised to C114-11b
  • C123/C123M Standard Test Method for Lightweight Particles in Aggregate
    Revised (with designation change) to C123/C123M-11
  • C125 Standard Terminology Relating to Concrete and Concrete Aggregates
    Revised to C125-11a
  • C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
    Revised to C140-11a
  • C443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
    Revised to C443-11
  • C443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
    Revised to C443M-11
  • C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens
    Revised (with designation change) to C617/C617M-11
  • C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
    Revised to C652-11
  • C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size
    Revised (with designation change) to C702/C702M-11
  • C726 Standard Specification for Mineral Wool Roof Insulation Board
    Revised to C726-11
  • C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
    Revised to C764-11
  • C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
    Revised to C955-11a
  • C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
    Revised to C1007-11a
  • C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
    Revised to C1289-11
  • C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
    Revised to C1567-11
  • C1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
    Revised to C1628-11
  • C1673 Standard Terminology of C26.10 Nondestructive Assay Methods
    Editorially changed, available as C1673-10ae1
  • C1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
    Revised to C1677-11a
  • C1708-11 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
    New standard, now available.
  • C1709-11 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
    New standard, now available.
  • C1719-11 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
    New standard, now available.
  • C1750-11 Standard Guide for Development, Verification, Validation, and Documentation of Simulated High-Level Tank Waste
    New standard, now available.
  • C1756-11 Standard Guide for Comparing Sealant Behavior to Reference Photographs
    New standard, now available.
  • D150 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
    Revised to D150-11
  • D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    Revised to D664-11a
  • D922 Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
    Revised to D922-11
  • D1047 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
    Revised to D1047-11
  • D1711 Standard Terminology Relating to Electrical Insulation
    Revised to D1711-11a
  • D2219 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
    Revised to D2219-11
  • D2220 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
    Revised to D2220-11
  • D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
    Reapproved (with editorial change), available as D2724-07(2011)e1
  • D2903 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
    Revised to D2903-11
  • D3150 Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
    Revised to D3150-11
  • D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
    Revised to D3241-11
  • D3363 Standard Test Method for Film Hardness by Pencil Test
    Editorially changed, available as D3363-05(2011)e1
  • D3800M Standard Test Method for Density of High-Modulus Fibers
    Revised (with designation change) to D3800M-11
  • D4628 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
    Reapproved (with editorial change), available as D4628-05(2011)e1
  • D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
    Revised to D4761-11
  • D4762 Standard Guide for Testing Polymer Matrix Composite Materials
    Revised to D4762-11a
  • D4768 Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography
    Revised to D4768-11
  • D4848 Standard Terminology Related to Force, Deformation and Related Properties of Textiles
    Editorially changed, available as D4848-98(2004)e1
  • D4898 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
    Editorially changed, available as D4898-90(2010)e1
  • D5032 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
    Revised to D5032-11
  • D5211 Standard Specification for Xylenes for p-Xylene Feedstock
    Revised to D5211-11
  • D5534 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
    Reapproved (with editorial change), available as D5534-94(2011)e1
  • D5585 Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00–20 has been reinstated, with revision to D5585-11
  • D578/D578M Standard Specification for Glass Fiber Strands
    Reapproved (with editorial change), available as D578/D578M-05(2011)e1
  • D6096 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
    Revised to D6096-11
  • D6126 Standard Specification for HFC-23 (Trifluoromethane, CHF3)
    Revised to D6126-11
  • D6231 Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)
    Revised to D6231-11
  • D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
    Editorially changed, available as D6304-07e1
  • D6413 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
    Revised to D6413-11
  • D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
    Editorially changed, available as D6744-06(2011)e1
  • D7185 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
    Revised to D7185-11a
  • D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
    Revised to D7504-11
  • D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
    Editorially changed, available as D7578-10e1
  • D7602-11 Standard Practice for Installation of Vulcanized Rubber Linings
    New standard, now available.
  • D7672 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
    Editorially changed, available as D7672-11e1
  • D7709 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
    Editorially changed, available as D7709-11e1
  • D7720-11 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
    New standard, now available.
  • D7721-11 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
    New standard, now available.
  • D7731 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
    Editorially changed, available as D7731-11e1
  • D7744/D7744M-11 Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
    New standard, now available.
  • E119 Standard Test Methods for Fire Tests of Building Construction and Materials
    Revised to E119-11a
  • E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
    Revised to E162-11a
  • E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
    Revised to E329-11b
  • E485 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
    Withdrawn and replaced by E1999-11
  • E607-02 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique, Nitrogen Atmosphere
    Withdrawn with no replacement.
  • E679 Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
    Reapproved, available as E679-04(2011)
  • E706-02 Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards
    Withdrawn with no replacement.
  • E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
    Editorially changed, available as E1007-11e1
  • E1115 Standard Test Method for Evaluation of Surgical Hand Scrub Formulations
    Revised to E1115-11
  • E1214 Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance, E 706 (IIIE)
    Revised to E1214-11
  • E1432 Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size
    Reapproved, available as E1432-04(2011)
  • E1530 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
    Revised to E1530-11
  • E1584 Standard Test Method for Assay of Nitric Acid
    Revised to E1584-11
  • E1627 Standard Practice for Sensory Evaluation of Edible Oils and Fats
    Revised to E1627-11
  • E1877 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
    Revised to E1877-11
  • E1885 Standard Test Method for Sensory AnalysisTriangle Test
    Reapproved, available as E1885-04(2011)
  • E1952 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
    Revised to E1952-11
  • E2139 Standard Test Method for Same-Different Test
    Reapproved, available as E2139-05(2011)
  • E2303 Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
    Revised to E2303-11
  • E2454 Standard Guide for Sensory Evaluation Methods to Determine the Sensory Shelf Life of Consumer Products
    Reapproved, available as E2454-05(2011)
  • E2459 Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
    Reapproved, available as E2459-05(2011)
  • E2839-11 Standard Test Method for Production of Clostridium difficile Spores for Use in Efficacy Evaluation of Antimicrobial Agents
    New standard, now available.
  • F439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    Revised to F439-11
  • F595 Standard Test Methods for Vacuum Cleaner Hose – Durability and Reliability (All-Plastic Hose)
    Withdrawn and replaced by F450-09
  • F877 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
    Revised to F877-11a
  • F2021 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
    Revised to F2021-11
  • F2359 Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
    Reapproved, available as F2359-04(2011)
  • F2904-11 Standard Specification for Warnings on Paintball Marker Accessories Used In the Sport of Paintball
    New standard, now available.
  • F2917-11 Standard Specification for Bicycle Trailer Cycles Designed for Human Passengers
    New standard, now available.
  • G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F [360°C] or in Steam at 750°F [400<
    Reapproved, available as G2/G2M-06(2011)
  • NACE/ASTM G193 Standard Terminology and Acronyms Relating to Corrosion
    Revised to NACE/ASTM G193-11a

Published in international.