ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A623 Standard Specification for Tin Mill Products, General Requirements
    Revised to A623-11 developed by Committee A01.20, ASTM BOS Volume 01.06.
  • A623M Standard Specification for Tin Mill Products, General Requirements [Metric]
    Revised to A623M-11 developed by Committee A01.20, ASTM BOS Volume 01.06.
  • A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use
    Reapproved, available as A834-95(2011) developed by Committee A04.01, ASTM BOS Volume 01.02.
  • A1035/A1035M Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
    Revised to A1035/A1035M-11 developed by Committee A01.05, ASTM BOS Volume 01.04.
  • B48 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors
    Reapproved, available as B48-00(2011) developed by Committee B01.04, ASTM BOS Volume 02.03.
  • B67 Standard Specification for Car and Tender Journal Bearings, Lined
    Reapproved, available as B67-05(2011) developed by Committee B05.05, ASTM BOS Volume 02.01.
  • B75M Standard Specification for Seamless Copper Tube (Metric)
    Reapproved, available as B75M-99(2011) developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B88M Standard Specification for Seamless Copper Water Tube (Metric)
    Reapproved, available as B88M-05(2011) developed by Committee B05.04, ASTM BOS Volume 02.01.
  • B563 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy
    Reapproved, available as B563-01(2011) developed by Committee B02.05, ASTM BOS Volume 02.04.
  • B566 Standard Specification for Copper-Clad Aluminum Wire
    Reapproved, available as B566-04a(2011) developed by Committee B01.06, ASTM BOS Volume 02.03.
  • B615 Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
    Reapproved, available as B615-79(2011) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
    Reapproved, available as B735-06(2011) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip
    Reapproved, available as B755-00(2011) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar
    Reapproved, available as B756-00(2011) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe
    Reapproved, available as B757-00(2011) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube
    Reapproved, available as B758-00(2011) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B759 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube
    Reapproved, available as B759-00(2011) developed by Committee B02.07, ASTM BOS Volume 02.04.
  • B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers
    Reapproved, available as B800-05(2011) developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
    Reapproved, available as B810-01a(2011) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
    Reapproved, available as B836-00(2011) developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
    Editorially changed, available as B894-10e1 developed by Committee B02.04, ASTM BOS Volume 02.04.
  • B898 Standard Specification for Reactive and Refractory Metal Clad Plate
    Revised to B898-11 developed by Committee B10.01, ASTM BOS Volume 02.04.
  • B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
    Reapproved, available as B901-04(2011) developed by Committee B01.07, ASTM BOS Volume 02.03.
  • B920 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
    Reapproved, available as B920-01(2011) developed by Committee B02.11, ASTM BOS Volume 02.04.
  • C14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
    Revised to C14-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
    Revised to C14M-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
    Revised to C42/C42M-11 developed by Committee C09.61, ASTM BOS Volume 04.02.
  • C118 Standard Specification for Concrete Pipe for Irrigation or Drainage
    Revised to C118-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C118M Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)
    Revised to C118M-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C169 Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
    Reapproved, available as C169-92(2011) developed by Committee C14.02, ASTM BOS Volume 15.02.
  • C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
    Revised to C411-11 developed by Committee C16.31, ASTM BOS Volume 04.06.
  • C412 Standard Specification for Concrete Drain Tile
    Revised to C412-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C412M Standard Specification for Concrete Drain Tile (Metric)
    Revised to C412M-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
    Reapproved, available as C429-01(2011) developed by Committee C14.02, ASTM BOS Volume 15.02.
  • C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
    Revised to C505-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
    Revised to C505M-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
    Revised to C533-11 developed by Committee C16.20, ASTM BOS Volume 04.06.
  • C654 Standard Specification for Porous Concrete Pipe
    Revised to C654-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C654M Standard Specification for Porous Concrete Pipe (Metric)
    Revised to C654M-11 developed by Committee C13.01, ASTM BOS Volume 04.05.
  • C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
    Reapproved (with editorial change), available as C686-90(2011)e1 developed by Committee C16.32, ASTM BOS Volume 04.06.
  • C696 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
    Revised to C696-11 developed by Committee C26.05, ASTM BOS Volume 12.01.
  • C729 Standard Test Method for Density of Glass by the Sink-Float Comparator
    Revised to C729-11 developed by Committee C14.04, ASTM BOS Volume 15.02.
  • C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
    Revised to C1242-11 developed by Committee C18.06, ASTM BOS Volume 04.07.
  • C1407 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
    Reapproved (with editorial change), available as C1407-98(2011)e1 developed by Committee C08.03, ASTM BOS Volume 15.01.
  • C1464 Standard Specification for Bent Glass
    Reapproved, available as C1464-06(2011) developed by Committee C14.08, ASTM BOS Volume 15.02.
  • C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
    Revised to C1482-11 developed by Committee C16.22, ASTM BOS Volume 04.06.
  • C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
    Revised to C1577-11 developed by Committee C13.07, ASTM BOS Volume 04.05.
  • C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
    Revised to C1630-11 developed by Committee C16.23, ASTM BOS Volume 04.06.
  • C1631-08 Standard Specification for Cellular Polypropylene Thermal Insulation
    Withdrawn with no replacement.
  • C1710 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
    Revised to C1710-11 developed by Committee C16.40, ASTM BOS Volume 04.06.
  • C1735-11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
    New standard, now available.
  • D123 Standard Terminology Relating to Textiles
    Editorially changed, available as D123-09e2 developed by Committee D13.92, ASTM BOS Volume 07.01.
  • D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
    Editorially changed, available as D228/D228M-09e1 developed by Committee D08.02, ASTM BOS Volume 04.04.
  • D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
    Reapproved, available as D245-06(2011) developed by Committee D07.02, ASTM BOS Volume 04.10.
  • D494 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
    Revised to D494-11 developed by Committee D20.70, ASTM BOS Volume 08.01.
  • D516 Standard Test Method for Sulfate Ion in Water
    Revised to D516-11 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D865 Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)
    Revised to D865-11 developed by Committee D11.15, ASTM BOS Volume 09.01.
  • D994/D994M Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
    Revised (with designation change) to D994/D994M-11 developed by Committee D04.34, ASTM BOS Volume 04.03.
  • D1050 Standard Specification for Rubber Insulating Line Hose
    Reapproved, available as D1050-05(2011) developed by Committee F18.25, ASTM BOS Volume 10.03.
  • D1066 Standard Practice for Sampling Steam
    Revised to D1066-11 developed by Committee D19.03, ASTM BOS Volume 11.01.
  • D1075 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    Revised to D1075-11 developed by Committee D04.22, ASTM BOS Volume 04.03.
  • D1092 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
    Revised to D1092-11 developed by Committee D02.G0.02, ASTM BOS Volume 05.01.
  • D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
    Revised to D1335-11 developed by Committee D13.21, ASTM BOS Volume 07.01.
  • D1357 Standard Practice for Planning the Sampling of the Ambient Atmosphere
    Reapproved, available as D1357-95(2011) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D1603 Standard Test Method for Carbon Black Content in Olefin Plastics
    Revised to D1603-11 developed by Committee D20.70, ASTM BOS Volume 08.01.
  • D1607 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
    Reapproved, available as D1607-91(2011) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
    Revised to D1894-11 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
    Editorially changed, available as D1894-11e1 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D1929 Standard Test Method for Determining Ignition Temperature of Plastics
    Revised to D1929-11 developed by Committee D20.30, ASTM BOS Volume 08.01.
  • D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
    Revised to D2287-11 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D2357 Standard for Qualitative Classification of Surfactants by Infrared Absorption
    Revised to D2357-11 developed by Committee D12.12, ASTM BOS Volume 15.04.
  • D2555 Standard Practice for Establishing Clear Wood Strength Values
    Reapproved, available as D2555-06(2011) developed by Committee D07.01, ASTM BOS Volume 04.10.
  • D2646 Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings
    Revised to D2646-11 developed by Committee D13.21, ASTM BOS Volume 07.01.
  • D2659 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
    Revised to D2659-11 developed by Committee D20.19, ASTM BOS Volume 08.01.
  • D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
    Revised to D2765-11 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D3030 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
    Revised to D3030-11 developed by Committee D20.15, ASTM BOS Volume 08.01.
  • D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
    Revised to D3241-11a developed by Committee D02.J0.03, ASTM BOS Volume 05.01.
  • D3249 Standard Practice for General Ambient Air Analyzer Procedures
    Reapproved, available as D3249-95(2011) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
    Revised to D3262-11 developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D3266 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
    Reapproved, available as D3266-91(2011) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D3268 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
    Reapproved, available as D3268-91(2011) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D3291 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
    Revised to D3291-11 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D3364 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
    Reapproved, available as D3364-99(2011) developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D3387 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
    Revised to D3387-11 developed by Committee D04.26, ASTM BOS Volume 04.03.
  • D3517 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
    Revised to D3517-11 developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D3561 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
    Revised to D3561-11 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D3608 Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
    Reapproved, available as D3608-95(2011) developed by Committee D22.03, ASTM BOS Volume 11.07.
  • D3631 Standard Test Methods for Measuring Surface Atmospheric Pressure
    Reapproved, available as D3631-99(2011) developed by Committee D22.11, ASTM BOS Volume 11.07.
  • D3651 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
    Revised to D3651-11 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D3675 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
    Revised to D3675-11 developed by Committee D20.30, ASTM BOS Volume 08.02.
  • D3679 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
    Revised to D3679-11 developed by Committee D20.24, ASTM BOS Volume 08.03.
  • D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
    Revised to D3740-11 developed by Committee D18.99, ASTM BOS Volume 04.08.
  • D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
    Revised to D3754-11 developed by Committee D20.23, ASTM BOS Volume 08.03.
  • D3774 Standard Test Method for Width of Textile Fabric
    Editorially changed, available as D3774-96(2008)e2 developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D3776/D3776M Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
    Editorially changed, available as D3776/D3776M-09ae2 developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D3882 Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
    Editorially changed, available as D3882-08e1 developed by Committee D13.60, ASTM BOS Volume 07.01.
  • D3888 Standard Terminology for Yarn Spinning Systems
    Editorially changed, available as D3888-07e1 developed by Committee D13.58, ASTM BOS Volume 07.01.
  • D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
    Revised to D3936-11 developed by Committee D13.21, ASTM BOS Volume 07.01.
  • D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    Revised to D3950-11 developed by Committee D10.25, ASTM BOS Volume 15.10.
  • D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
    Revised (with title change) to D3965-11 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D3986 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
    Revised to D3986-11 developed by Committee D19.05, ASTM BOS Volume 11.02.
  • D4009 Standard Guide for Foam Stability of Hand Dishwashing Detergents
    Reapproved, available as D4009-92(2011) developed by Committee D12.16, ASTM BOS Volume 15.04.
  • D4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
    Revised to D4020-11 developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D4185 Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
    Reapproved, available as D4185-06(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
    Revised to D4226-11 developed by Committee D20.24, ASTM BOS Volume 08.03.
  • D4391 Standard Terminology Relating to The Burning Behavior of Textiles
    Editorially changed, available as D4391-93a(2006)e1 developed by Committee D13.92, ASTM BOS Volume 07.01.
  • D4490 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
    Reapproved, available as D4490-96(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
    Revised to D4634-11a developed by Committee D20.15, ASTM BOS Volume 08.02.
  • D4638 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
    Revised to D4638-11 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D4691 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
    Revised to D4691-11 developed by Committee D19.05, ASTM BOS Volume 11.01.
  • D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics
    Revised to D4759-11 developed by Committee D35.01, ASTM BOS Volume 04.13.
  • D4772 Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
    Editorially changed, available as D4772-09e1 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D4849 Standard Terminology Related to Yarns and Fibers
    Editorially changed, available as D4849-02b(2007)e1 developed by Committee D13.58, ASTM BOS Volume 07.02.
  • D4850 Standard Terminology Relating to Fabrics and Fabric Test Methods
    Editorially changed, available as D4850-08e1 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D4856 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
    Revised (with title change) to D4856-11 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D4964 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
    Editorially changed, available as D4964-96(2008)e2 developed by Committee D13.59, ASTM BOS Volume 07.02.
  • D5096 Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
    Reapproved, available as D5096-02(2011) developed by Committee D22.11, ASTM BOS Volume 11.07.
  • D5138 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
    Revised (with title change) to D5138-11 developed by Committee D20.15, ASTM BOS Volume 08.03.
  • D5252 Standard Practice for the Operation of the Hexapod Tumble Drum Tester
    Revised to D5252-11 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D5296 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
    Revised to D5296-11 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D5366 Standard Test Method for Determining the Dynamic Performance of a Wind Vane
    Reapproved, available as D5366-96(2011) developed by Committee D22.11, ASTM BOS Volume 11.07.
  • D5417 Standard Practice for Operation of the Vettermann Drum Tester
    Revised to D5417-11 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D5445 Standard Practice for Pictorial Markings for Handling of Goods
    Revised to D5445-11 developed by Committee D10.11, ASTM BOS Volume 15.10.
  • D5495 Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
    Reapproved, available as D5495-03(2011) developed by Committee D34.01.03, ASTM BOS Volume 11.04.
  • D5527 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
    Reapproved, available as D5527-00(2011) developed by Committee D22.11, ASTM BOS Volume 11.07.
  • D5631 Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)
    Revised to D5631-11 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D5740 Standard Guide for Writing Material Standards in the Classification D4000 Format
    Revised to D5740-11 developed by Committee D20.94, ASTM BOS Volume 08.03.
  • D5741 Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
    Reapproved, available as D5741-96(2011) developed by Committee D22.11, ASTM BOS Volume 11.07.
  • D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
    Editorially changed, available as D5777-00(2011)e1 developed by Committee D18.01, ASTM BOS Volume 04.09.
  • D6056 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
    Reapproved, available as D6056-96(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6057 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
    Reapproved, available as D6057-96(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6058 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
    Reapproved, available as D6058-96(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6059 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
    Reapproved, available as D6059-96(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6064 Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
    Revised to D6064-11 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D6065 Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
    Revised to D6065-11 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D6127 Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)
    Revised to D6127-11 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D6429 Standard Guide for Selecting Surface Geophysical Methods
    Reapproved (with editorial change), available as D6429-99(2011)e1 developed by Committee D18.01, ASTM BOS Volume 04.09.
  • D6433 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
    Revised to D6433-11 developed by Committee E17.42, ASTM BOS Volume 04.03.
  • D6541 Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF3CH 2CF3)
    Revised to D6541-11 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D6552 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
    Reapproved, available as D6552-06(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6561 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
    Reapproved, available as D6561-06(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6562 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
    Reapproved, available as D6562-06(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D6577 Standard Guide for Testing Industrial Protective Coatings
    Reapproved (with editorial change), available as D6577-06(2011)e1 developed by Committee D01.46, ASTM BOS Volume 06.02.
  • D6674 Standard Guide for Proficiency Test Program for Fabrics
    Editorially changed, available as D6674-01(2009)e1 developed by Committee D13.60, ASTM BOS Volume 07.02.
  • D6859 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
    Revised to D6859-11 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D6869 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
    Reapproved, available as D6869-03(2011) developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
    Revised to D6935-11 developed by Committee D04.42, ASTM BOS Volume 04.03.
  • D6953 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
    Revised to D6953-11 developed by Committee D20.70, ASTM BOS Volume 08.03.
  • D6998 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
    Revised to D6998-11 developed by Committee D04.42, ASTM BOS Volume 04.03.
  • D7122 Standard Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)
    Revised to D7122-11 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D7123 Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl2H, Ar, and CF4)
    Revised to D7123-11 developed by Committee D26.09, ASTM BOS Volume 15.05.
  • D7201 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
    Reapproved, available as D7201-06(2011) developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D7202 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Optical Fluorescence Detection
    Revised (with title change) to D7202-11 developed by Committee D22.04, ASTM BOS Volume 11.07.
  • D7252 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
    Reapproved (with editorial change), available as D7252-06(2011)e1 developed by Committee D20.22, ASTM BOS Volume 08.03.
  • D7253 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
    Reapproved (with editorial change), available as D7253-06(2011)e1 developed by Committee D20.22, ASTM BOS Volume 08.03.
  • D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
    Editorially changed, available as D7319-11e1 developed by Committee D02.03, ASTM BOS Volume 05.04.
  • D7330 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
    Revised to D7330-11 developed by Committee D13.21, ASTM BOS Volume 07.02.
  • D7703-11 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System
    New standard, now available. Developed by Committee D35.10, ASTM BOS Volume 04.13.
  • D7711 Standard Guide for Description of Polymer Pellet Defects
    Editorially changed, available as D7711-11e1 developed by Committee D20.92, ASTM BOS Volume 08.03.
  • D7711-11 Standard Guide for Description of Polymer Pellets Including Defects
    New standard, now available. Developed by Committee D20.92, ASTM BOS Volume 08.03.
  • D7712-11 Standard Terminology for Sampling and Analysis of Asbestos
    New standard, now available. Developed by Committee D22.07, ASTM BOS Volume 11.07.
  • D7728-11 Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
    New standard, now available. Developed by Committee D19.06, ASTM BOS Volume 11.02.
  • D7745-11 Standard Practice for Testing Pultruded Composites
    New standard, now available. Developed by Committee D20.18.02, ASTM BOS Volume 08.03.
  • E108 Standard Test Methods for Fire Tests of Roof Coverings
    Revised to E108-11 developed by Committee E05.14, ASTM BOS Volume 04.07.
  • E316 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
    Revised (with title change) to E316-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E465 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
    Revised (with title change) to E465-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
    Revised to E468-11 developed by Committee E08.05, ASTM BOS Volume 03.01.
  • E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
    Revised to E562-11 developed by Committee E04.14, ASTM BOS Volume 03.01.
  • E738 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry
    Revised (with title change) to E738-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E815 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry
    Revised (with title change) to E815-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E918 Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
    Reapproved, available as E918-83(2011) developed by Committee E27.04, ASTM BOS Volume 14.02.
  • E957 Standard Terminology Relating to Geothermal Energy
    Reapproved (with editorial change), available as E957-03(2011)e1 developed by Committee E44.15, ASTM BOS Volume 12.02.
  • E971 Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
    Revised to E971-11 developed by Committee E44.05, ASTM BOS Volume 12.02.
  • E1049 Standard Practices for Cycle Counting in Fatigue Analysis
    Reapproved (with editorial change), available as E1049-85(2011)e1 developed by Committee E08.04, ASTM BOS Volume 03.01.
  • E1070 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
    Revised to E1070-11 developed by Committee E01.02, ASTM BOS Volume 03.05.
  • E1216 Standard Practice for Sampling for Particulate Contamination by Tape Lift
    Revised to E1216-11 developed by Committee E21.05, ASTM BOS Volume 15.03.
  • E1417/E1417M Standard Practice for Liquid Penetrant Testing
    Revised (with designation change) to E1417/E1417M-11 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1444/E1444M Standard Practice for Magnetic Particle Testing
    Revised (with designation change) to E1444/E1444M-11 developed by Committee E07.03, ASTM BOS Volume 03.03.
  • E1637 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
    Reapproved, available as E1637-98(2011) developed by Committee E06.57, ASTM BOS Volume 04.11.
  • E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
    Editorially changed, available as E1681-03(2008)e2 developed by Committee E08.06, ASTM BOS Volume 03.01.
  • E1916 Standard Guide for Identification of Mixed Lots of Metals
    Revised to E1916-11 developed by Committee E01.20, ASTM BOS Volume 03.05.
  • E1966 Standard Test Method for Fire-Resistive Joint Systems
    Reapproved, available as E1966-07(2011) developed by Committee E05.11, ASTM BOS Volume 04.07.
  • E2801-11 Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Gaps
    New standard, now available. Developed by Committee E54.08, ASTM BOS Volume 15.08.
  • F406 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
    Revised to F406-11b developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F895 Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
    Revised to F895-11 developed by Committee F04.16, ASTM BOS Volume 13.01.
  • F977 Standard Consumer Safety Specification for Infant Walkers
    Revised to F977-11a developed by Committee F15.17, ASTM BOS Volume 15.11.
  • F1169 Standard Consumer Safety Specification for Full-Size Baby Cribs
    Revised to F1169-11 developed by Committee F15.18, ASTM BOS Volume 15.11.
  • F1281 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
    Revised to F1281-11 developed by Committee F17.11, ASTM BOS Volume 08.04.
  • F1967 Standard Consumer Safety Specification for Infant Bath Seats
    Revised to F1967-11a developed by Committee F15.20, ASTM BOS Volume 15.11.
  • F2019 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
    Revised to F2019-11 developed by Committee F17.67, ASTM BOS Volume 08.04.
  • F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
    Revised to F2170-11 developed by Committee F06.40, ASTM BOS Volume 15.04.
  • F2373 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
    Revised to F2373-11 developed by Committee F15.44, ASTM BOS Volume 15.11.
  • F2428 Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
    Reapproved, available as F2428-04(2011) developed by Committee F30.01, ASTM BOS Volume 13.02.
  • F2436 Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
    Reapproved, available as F2436-05(2011) developed by Committee F32.01, ASTM BOS Volume 13.02.
  • F2522 Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards
    Reapproved, available as F2522-05(2011) developed by Committee F18.35, ASTM BOS Volume 10.03.
  • F2670 Standard Consumer Safety Specification for Infant Bath Tubs
    Revised to F2670-11 developed by Committee F15.20, ASTM BOS Volume 15.11.
  • F2745-11 Standard Specification for Required Product Information to be Provided with an Airplane
    New standard, now available. Developed by Committee F37.20, ASTM BOS Volume 15.11.
  • F2805 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
    Revised to F2805-11 developed by Committee F17.11, ASTM BOS Volume 08.04.
  • F2921-11 Standard Terminology for Additive Manufacturing - Coordinate Systems and Test Methodologies
    New standard, now available. Developed by Committee F42.01, ASTM BOS Volume 10.04.
  • G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
    Reapproved, available as G47-98(2011) developed by Committee G01.06, ASTM BOS Volume 03.02.
  • G48 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
    Revised to G48-11 developed by Committee G01.05, ASTM BOS Volume 03.02.
  • G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
    Reapproved, available as G139-05(2011) developed by Committee G01.06, ASTM BOS Volume 03.02.

Published in international.