BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH STANDARD

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 8436:2011 Electric cables. Specification for 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
    Supersedes BS 8436:2004

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 196-5:2011 Methods of testing cement. Pozzolanicity test for pozzolanic cement
    Supersedes BS EN 196-5:2005
  • BS EN 354:2010 Personal fall protection equipment. Lanyards
    Supersedes BS EN 354:2002
  • BS EN 488:2011 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
    Supersedes BS EN 488:2003
  • BS EN 500-4:2011 Mobile road construction machinery. Safety. Specific requirements for compaction machines
    Supersedes BS EN 500-4:2006+A1:2009
  • BS EN 548:2011 Resilient floor coverings. Specification for plain and decorative linoleum
    Supersedes BS EN 548:2004
  • BS EN 649:2011 Resilient floor coverings. Homogenous and heterogenous polyvinyl chloride floor coverings. Specification
    Supersedes BS EN 649:1997
  • BS EN 651:2011 Resilient floor coverings. Polyvinyl chloride floor coverings with foam layer. Specification
    Supersedes BS EN 651:1997
  • BS EN 652:2011 Resilient floor coverings. Polyvinyl chloride floor coverings with cork-based backing. Specification
    Supersedes BS EN 652:1997
  • BS EN 1559-1:2011 Founding. Technical conditions of delivery. General
    Supersedes BS EN 1559-1:1997
  • BS EN 1560:2011 Founding. Designation system for cast iron. Material symbols and material numbers
    Supersedes BS EN 1560:1997
  • BS EN ISO 3611:2010 Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics
    Supersedes BS 870:2008 which remains current and obsolescent
  • BS EN ISO 4017:2011 Hexagon head screws. Product grades A and B
    Supersedes BS EN ISO 4017:2001
  • BS EN ISO 4018:2011 Hexagon head screws. Product grade C
    Supersedes BS EN ISO 4018:2001
  • BS EN ISO 5264-2:2011 Pulps. Laboratory beating. PFI mill method
    Supersedes BS EN ISO 5264-2:2002
  • BS EN ISO 7263:2011 Corrugating medium. Determination of the flat crush resistance after laboratory fluting
    Supersedes BS EN ISO 7263:2008
  • BS EN ISO 8251:2011 Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
    Supersedes BS EN 12373-9:1999 and BS EN 12373-10:1999
  • BS EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread. Product grades A and B
    Supersedes BS EN ISO 8676:2001
  • BS EN ISO 9015-2:2011 Destructive tests on welds in metallic materials. Hardness testing. Microhardness testing of welded joints
    Supersedes BS EN 1043-2:1997
  • BS EN ISO 10510:2011 Tapping screw and washer assemblies with plain washers
    Supersedes BS EN ISO 10510:2000
  • BS EN ISO 10893-1:2011 Non-destructive testing of steel tubes. Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
    Supersedes BS EN 10246-1:1996 and BS EN 10246-2:2000
  • BS EN ISO 10893-2:2011 Non-destructive testing of steel tubes. Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
    Supersedes BS EN 10246-3:2000
  • BS EN ISO 10893-3:2011 Non-destructive testing of steel tubes. Automated full peripheral flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections
    Supersedes BS EN 10246-4:2000 and BS EN 10246-5:2000
  • BS EN ISO 10893-4:2011 Non-destructive testing of steel tubes. Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
    Supersedes BS EN 10246-11:2000
  • BS EN ISO 10893-5:2011 Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
    Supersedes BS EN 10246-12:2000 and BS EN 10246-18:2000
  • BS EN ISO 10893-6:2011 Non-destructive testing of steel tubes. Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
    Supersedes BS EN 10246-10:2000
  • BS EN ISO 10893-7:2011 Non-destructive testing of steel tubes. Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections
  • BS EN ISO 10893-8:2011 Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections
    Supersedes BS EN 10246-14:2000, BS EN 10246-16:2000 and BS EN 10246-17:2000
  • BS EN ISO 10893-9:2011 Non-destructive testing of steel tubes. Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
    Supersedes BS EN 10246-15:2000
  • BS EN ISO 10893-10:2011 Non-destructive testing of steel tubes. Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal and/or transverse imperfections
    Supersedes BS EN 10246-6:2000 and BS EN 10246-7:2005
  • BS EN ISO 10893-11:2011 Non-destructive testing of steel tubes. Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections
    Supersedes BS EN 10246-8:2000 and BS EN 10246-9:2000
  • BS EN ISO 10893-12:2011 Non-destructive testing of steel tubes. Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes
    Supersedes BS EN 10246-13:2000
  • BS EN ISO 11073-10404:2011 Health informatics. Personal health device communication. Device specialization. Pulse oximeter
  • BS EN ISO 11073-10408:2011 Health informatics. Personal health device communication.
    Device specialization. Thermometer
  • BS EN ISO 11073-10417:2011 Health informatics. Personal health device communication. Device specialization. Glucose meter
  • BS EN ISO 11073-10471:2011 Health Informatics. Personal health device communication. Device specialization. Independent living activity hub
  • BS EN ISO 11073-20601:2011 Health informatics. Personal health device communication. Application profile. Optimized exchange protocol
  • BS EN ISO 12052:2011 Health informatics. Digital imaging and communication in medicine (DICOM) including workflow and data management
    Supersedes BS EN 12052:2004
  • BS EN ISO 12180-1:2011 Geometrical product specifications (GPS). Cylindricity. Vocabulary and parameters of cylindrical form
    Supersedes DD CEN ISO/TS 12180-1:2007
  • BS EN ISO 12180-2:2011 Geometrical product specifications (GPS). Cylindricity. Specification operators
    Supersedes DD CEN ISO/TS 12180-2:2007
  • BS EN ISO 12181-1:2011 Geometrical product specifications (GPS). Roundness. Vocabulary and parameters of roundness
    Supersedes DD CEN ISO/TS 12181-1:2007
  • BS EN ISO 12181-2:2011 Geometrical product specifications (GPS). Roundness. Specification operators
    Supersedes DD CEN ISO/TS 12181-2:2007
  • BS EN 12513:2011 Founding. Abrasion resistant cast irons
    Supersedes BS EN 12513:2000
  • BS EN ISO 12780-1:2011 Geometrical product specifications (GPS). Straightness. Vocabulary and parameters of straightness
    Supersedes DD CEN ISO/TS 12780-1:2007
  • BS EN ISO 12780-2:2011 Geometrical product specifications (GPS). Straightness. Specification operators
    Supersedes DD CEN ISO/TS 12780-2:2007
  • BS EN ISO 12781-1:2011 Geometrical product specifications (GPS). Flatness. Vocabulary and parameters of flatness
    Supersedes DD CEN ISO/TS 12781-1:2007
  • BS EN ISO 12781-2:2011 Geometrical product specifications (GPS). Flatness. Specification operators
    Supersedes DD CEN ISO/TS 12781-2:2007
  • BS EN 12829:2011 Surface active agents. Preparation of water with known calcium and magnesium hardness
    Supersedes BS EN 12829:1998
  • BS EN 12859:2011 Gypsum blocks. Definitions, requirements and test methods
    Supersedes BS EN 12859:2008
  • BS EN 12953-6:2011 Shell boilers. Requirements for equipment for the boiler
    Supersedes BS EN 12953-6:2002
  • BS EN ISO 12967-1:2011 Health informatics. Service architecture. Enterprise viewpoint
    Supersedes BS EN 12967-1:2007
  • BS EN ISO 12967-2:2011 Health informatics. Service architecture. Information viewpoint
    Supersedes BS EN 12967-2:2007
  • BS EN ISO 12967-3:2011 Health informatics. Service architecture. Computational viewpoint
    Supersedes BS EN 12967-3:2007
  • BS EN 12999:2011 Cranes. Loader cranes
    Supersedes BS EN 12999:2002+A2:2006
  • BS EN 13411-4:2011 Terminations for steel wire ropes. Safety. Metal and resin socketing
    Supersedes BS EN 13411-4:2002+A1:2008
  • BS EN 13614:2011 (BS 2000-521:2011) Bitumen and bituminous binders. Determination of adhesivity of bituminous emulsions by water immersion test
    Supersedes the dual numbered standard BS EN 13614:2004, BS 2000-521:2004
  • BS EN 13749:2011 Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames
    Supersedes BS EN 13749:2005
  • BS EN ISO 14253-2:2011 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    Supersedes DD ENV ISO 14253-2:2001
  • BS EN ISO 14534:2011 Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements
    Supersedes BS EN ISO 14534:2009
  • BS EN ISO 14579:2011 Hexalobular socket head cap screws
    Supersedes BS EN ISO 14579:2001
  • BS EN ISO 14580:2011 Hexalobular socket cheese head screws
    Supersedes BS EN ISO 14580:2001
  • BS EN ISO 14583:2011 Hexalobular socket pan head screws
    Supersedes BS EN ISO 14583:2001
  • BS EN 15011:2011 Cranes. Bridge and gantry cranes
  • BS EN ISO 15015:2011 Plastics. Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA). Requirements and test methods
    Supersedes BS EN ISO 15015:2007
  • BS EN 15440:2011 Solid recovered fuels. Methods for the determination of biomass content
    Supersedes DD CEN/TS 15440:2006 and DD CEN/TS 15747:2008
  • BS EN 15776:2011 Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
  • BS EN 15827:2011 Railway applications. Requirements for bogies and running gears
  • BS EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
    Supersedes BS EN 1811:1998+A1:2008 which remains current
  • BS EN 16140:2011 Natural stone test methods. Determination of sensitivity to changes in appearance produced by thermal cycles
  • BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
  • BS EN ISO 28721-1:2011 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for apparatus, components, appliances and accessories
    Supersedes BS EN 15159-1:2006
  • BS EN ISO 28721-2:2011 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Designation and specification of resistance to chemical attack and thermal shock
    Supersedes BS EN 15159-2:2006
  • BS EN ISO 28721-3:2011 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Thermal shock resistance
    Supersedes BS EN 15159-3:2006
  • BS EN ISO 28722:2011 Vitreous and porcelain enamels. Characteristics of enamel coatings applied to steel panels intended for architecture
    Supersedes BS EN 14431:2004
  • BS EN ISO 28723:2011 Vitreous and porcelain enamels. Determination of the edge covering on enamelled steel plate to be used in heat exchangers
    Supersedes BS EN 14863:2005
  • BS EN ISO 28763:2011 Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
    Supersedes BS EN 14866:2005
  • BS EN ISO 28764:2011 Vitreous and porcelain enamels. Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
    Supersedes BS 1344-12:1996, BS 1344-13:1975, BS EN 15206:2007 and BS ISO 13804:1999
  • BS EN ISO 28765:2011 Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
    Supersedes BS EN 15282:2007
  • BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
    Supersedes BS EN 50176:1997
  • BS EN 50177:2009 Stationary electrostatic application equipment for ignitable coating powders. Safety requirements
    Supersedes BS EN 50177:2006
  • BS EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
    Supersedes BS EN 50223:2001
  • BS EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
    Supersedes BS EN 50271:2002
  • BS EN 50291-1:2010 Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements
    Supersedes BS EN 50291:2001
  • BS EN 50291-2:2010 Electrical apparatus for the detection of carbon monoxide in domestic premises. Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. Additional test methods and performance requirements
  • BS EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
  • BS EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
  • BS EN 50377-13-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
  • BS EN 50377-13-3:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
  • BS EN 50377-15-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type MPO with 12-fibre PPS ferrules terminated on IEC 60793-2 category A1a multimode fibre for 50/125 micron multimode fibre
  • BS EN 50411-3-2:2011 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Singlemode mechanical fibre splice
  • BS EN 50543:2011 Electronic portable and transportable apparatus designed to detect and measure carbon dioxide and/or carbon monoxide in indoor ambient air. Requirements and test methods
  • BS EN 50556:2011 Road traffic signal systems
    Supersedes BS 7987:2001+A1:2006
  • BS EN 60079-19:2011 Explosive atmospheres. Equipment repair, overhaul and reclamation
    Supersedes BS EN 60079-19:2007
  • BS EN 60730-2-7:2010 Automatic electrical controls for household and similar use. Particular requirements for timers and time switches
    Supersedes BS EN 60730-2-7:1992 which remains current
  • BS EN 62132-2:2011 Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. TEM cell and wideband TEM cell method
  • BS EN 80001-1:2011 Application of risk management for IT-networks incorporating medical devices. Roles, responsibilities and activities

BS ENs IMPLEMENTED BY AMENDMENT

  • BS EN ISO 3661:2010 End-suction centrifugal pumps. Baseplate and installation dimensions
    Implementation of Standard EN ISO 3661 by amendment to BS EN 23661:1993
  • BS EN ISO 8130-1:2010 Coating powders. Determination of particle size distribution by sieving
    Implementation of Standard EN ISO 8130-1 by amendment to BS 3900-J2:1993
  • BS EN ISO 8130-2:2010 Coating powders. Determination of density by gas comparison pyknometer (referee method)
    Implementation of Standard EN ISO 8130-2 by amendment to BS 3900-J6:1993
  • BS EN ISO 8130-4:2010 Coating powders. Calculation of lower explosion limit
    Implementation of Standard EN ISO 8130-4 by amendment to BS 3900-J8:1993
  • BS EN ISO 8130-5:2010 Coating powders. Determination of flow properties of a powder/air mixture
    Implementation of Standard EN ISO 8130-5 by amendment to BS 3900-J9:1993
  • BS EN ISO 8130-6:2010 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
    Implementation of Standard EN ISO 8130-6 by amendment to BS 3900-J3:1998
  • BS EN ISO 8130-7:2010 Coating powders. Determination of loss of mass on stoving
    Implementation of Standard EN ISO 8130-7 by amendment to BS 3900-J5:1993
  • BS EN ISO 8130-8:2010 Coating powders. Assessment of the storage stability of thermosetting powders
    Implementation of Standard EN ISO 8130-8 by amendment to BS 3900-J4:1995
  • BS EN ISO 8130-10:2010 Coating powders. Determination of deposition efficiency
    Implementation of Standard EN ISO 8130-10 by amendment to BS 3900-J10:1998
  • BS EN ISO 8130-11:2010 Coating powders. Inclined-plane flow test
    Implementation of Standard EN ISO 8130-11 by amendment to BS 3900-J11:1997
  • BS EN ISO 8130-12:2010 Coating powders. Determination of compatibility
    Implementation of Standard EN ISO 8130-12 by amendment to BS 3900-J12:1998

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 2493-1:2010 Paper and board. Determination of bending resistance. Constant rate of deflection
    Supersedes BS 3748:1992 which remains current
  • BS ISO 3720:2011 Black tea. Definition and basic requirements
    Supersedes BS 6048:1987
  • BS ISO 6016:2008 Earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
    Supersedes BS 6911-13:1998
  • BS ISO 7206-2:2011 Implants for surgery. Partial and total hip joint prostheses. Articulating surfaces made of metallic, ceramic and plastics materials
    Supersedes BS 7251-4:1997
  • BS ISO 8455:2011 Green coffee. Guidelines for storage and transport
    Supersedes BS 6827:1987
  • BS ISO/IEC 10373-8:2011 Identification cards. Test methods. USB-ICC
  • BS ISO 10376:2011 Pulps. Determination of mass fraction of fines
  • BS ISO 10392:2011 Road vehicles. Determination of centre of gravity
    Supersedes BS AU 246:1992
  • BS ISO 11040-2:2011 Prefilled syringes. Plunger stoppers for dental local anaesthetic cartridges
    Supersedes BS 7652-2:1995
  • BS ISO 11783-5:2011 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Network management
  • BS ISO 11893:2011 Space systems. Programme management. Project organization
  • BS ISO 13926-2:2011 Pen systems. Plunger stoppers for pen-injectors for medical use
  • BS ISO 14223-1:2011 Radiofrequency identification of animals. Advanced transponders. Air interface
  • BS ISO/IEC 14443-3:2011 Identification cards. Contactless integrated circuit cards. Proximity cards. Initialization and anticollision
    Supersedes BS ISO/IEC 14443-3:2001+A3:2006
  • BS ISO 15031-5:2011 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Emissions-related diagnostic services
    Supersedes BS ISO 15031-5:2006
  • BS ISO/IEC 15909-2:2011 Systems and software engineering. High-level Petri nets. Transfer format
  • BS ISO 16333:2011 Heavy commercial vehicles and buses. Steady-state rollover threshold. Tilt-table test method
  • BS ISO 16754:2008 Earth-moving machinery. Determination of average ground contact pressure for crawler machines
  • BS ISO/IEC 19761:2011 Software engineering. COSMIC: A functional size measurement method
    Supersedes BS ISO/IEC 19761:2003
  • BS ISO 21751:2011 Plastics pipes and fittings. Decohesion test of electrofusion assemblies. Strip-bend test
  • BS ISO 22155:2011 Soil quality. Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers. Static headspace method
    Supersedes BS ISO 22155:2005
  • BS ISO 22197-2:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air purification performance of semiconducting photocatalytic materials. Removal of acetaldehyde
  • BS ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air purification performance of semiconducting photocatalytic materials. Removal of toluene
  • BS ISO 23460:2011 Space projects. Programme management. Dependability assurance requirements
  • BS ISO/IEC 24724:2011 Information technology. Automatic identification and data capture techniques. GS1 DataBar bar code symbology specification
    Supersedes BS ISO/IEC 24724:2006
  • BS ISO/IEC 24727-5:2011 Identification cards. Integrated circuit card programming interfaces. Testing procedures
  • BS ISO/IEC IEEE 24765:2010 Systems and software engineering. Vocabulary
  • BS ISO 28560-1:2011 Information and documentation. RFID in libraries. Data elements and general guidelines for implementation
  • BS ISO 28560-2:2011 Information and documentation. RFID in libraries. Encoding of RFID data elements based on rules from ISO/IEC 15962
  • BS ISO 28560-3:2011 Information and documentation. RFID in libraries. Fixed length encoding
  • BS ISO 28801:2011 (BS 6001-9:2011) Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
    Supersedes BS 6001-9:2002
  • BS ISO/IEC 29109-5:2011 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Face image data
  • BS ISO 29281:2011 Intelligent transport systems. Communications access for land mobiles (CALM). Non-IP networking

PUBLISHED DOCUMENTS

  • PD 68888:2011 Objectives and learning outcomes for BS 8888 training
  • PD ISO/TR 945-2:2011 Microstructure of cast irons. Graphite classification by image analysis
  • PD ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments
  • PD ISO/TR 15144-1:2011 Calculation of micro-pitting load capacity of cylindrical spur and helical gears. Introduction and basic principles
  • PD CEN/TR 16151:2011 Water quality. Guidance on the design of multimetric indices

CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 1566-1:2002+A1:2011 Copper indirect cylinders for domestic purposes. Open vented copper cylinders. Requirements and test methods
    AMENDMENT 1
  • BS 1922:1987+A2:2011 Specification for glass dispensing measures for pharmaceutical purposes
    AMENDMENT 2
  • BS 8486-1:2007+A1:2011 Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81. Electric lifts
    AMENDMENT 1
  • BS 8486-2:2007+A1:2011 Examination and test of new lifts before putting into service. Specification for means of determining compliance with BS EN 81. Hydraulic lifts
    AMENDMENT 1
  • BS EN 54-25:2008 Fire detection and fire alarm systems. Components using radio links
    CORRIGENDUM 1
  • BS EN 741:2000+A1:2010 Continuous handling equipment and systems. Safety requirements for systems and their components for pneumatic handling of bulk materials
    AMENDMENT 1
  • BS EN 1028-2:2002+A1:2008 Fire-fighting pumps. Fire-fighting centrifugal pumps with primer. Verification of general and safety requirements
    AMENDMENT 1
  • BS EN 1335-3:2009 Office furniture. Office work chair. Test methods
    CORRIGENDUM 1
  • BS EN 1534:2010 Wood flooring. Determination of resistance to indentation. Test method
    CORRIGENDUM 1
  • BS EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines. Safety. Compression ignition engines
    AMENDMENT 1
  • BS EN ISO 3661:2010 End-suction centrifugal pumps. Baseplate and installation dimensions
    CORRIGENDUM 1
  • BS EN ISO 8130-1:2010 Coating powders. Determination of particle size distribution by sieving
    CORRIGENDUM 1
  • BS EN ISO 8130-2:2010 Coating powders. Determination of density by gas comparison pyknometer (referee method)
    CORRIGENDUM 1
  • BS EN ISO 8130-4:2010 Coating powders. Calculation of lower explosion limit
    CORRIGENDUM 1
  • BS EN ISO 8130-5:2010 Coating powders. Determination of flow properties of a powder/air mixture
    CORRIGENDUM 1
  • BS EN ISO 8130-6:2010 Coating powders. Determination of gel time of thermosetting coating powders at a given temperature
    CORRIGENDUM 1
  • BS EN ISO 8130-7:2010 Coating powders. Determination of loss of mass on stoving
    CORRIGENDUM 1
  • BS EN ISO 8130-8:2010 Coating powders. Assessment of the storage stability of thermosetting powders
    CORRIGENDUM 1
  • BS EN ISO 8130-10:2010 Coating powders. Determination of deposition efficiency
    CORRIGENDUM 1
  • BS EN ISO 8130-11:2010 Coating powders. Inclined-plane flow test
    CORRIGENDUM 1
  • BS EN ISO 8130-12:2010 Coating powders. Determination of compatibility
    CORRIGENDUM 1
  • BS EN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications
    AMENDMENT 1
  • BS EN 15193:2007 Energy performance of buildings. Energy requirements for lighting
    CORRIGENDUM 1
  • BS EN 15275:2007 Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
    CORRIGENDUM 2
  • BS EN 50173-3:2007+A1:2010 Information technology. Generic cabling systems. Industrial premises
    AMENDMENT 1
  • BS EN 50173-4:2007+A1:2010 Information technology. Generic cabling systems. Homes
    AMENDMENT 1
  • BS EN 50341-3:2001 Overhead electrical lines exceeding AC 45 kV. Set of National Normative Aspects
    CORRIGENDUM 5
  • BS EN 50423-3:2005 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV. Set of National Normative Aspects
    CORRIGENDUM 4
  • BS EN 60664-3:2003+A1:2010 Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution
    CORRIGENDUM 1
  • BS EN 60695-6-1:2005+A1:2010 Fire hazard testing. Smoke obscuration. General guidance
    AMENDMENT 1
  • BS EN 61347-2-12:2005+A1:2010 Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
    AMENDMENT 1
  • BS EN 61400-1:2005+A1:2010 Wind turbines. Design requirements
    AMENDMENT 1
  • BS ISO 3780:2009 Road vehicles. World manufacturer identifier (WMI) code
    CORRIGENDUM 1
  • BS ISO/IEC 26300:2006 Information technology. Open document format for office applications (OpenDocument) v1.0
    CORRIGENDUM 1
  • BS ISO/IEC 29109-1:2009 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Generalized conformance testing methodology
    CORRIGENDUM 1

BRITISH STANDARD DECLARED OBSOLESCENT

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

  • BS 1881-128:1997 Testing concrete. Methods for analysis of fresh concrete
    This standard has been declared obsolescent as the committee feel it is no longer relevant
  • BS 1881-130:1996 Testing concrete. Method for temperature matched curing of concrete specimens
    This standard has been declared obsolescent as the committee feel it is no longer relevant
  • DD 216:1993 Method for determination of chloride content of fresh concrete
    This standard has been declared obsolescent as the committee feel it is no longer relevant

BRITISH STANDARDS WITHDRAWN

  • BS 1344-12:1996 (ISO 2723:1995) Methods of testing vitreous enamel finishes. Production of specimens for testing coatings on sheet steel
    Superseded by BS EN ISO 28764:2011
  • BS 1344-13:1975 (ISO 2724:1973) Methods of testing vitreous enamel finishes. Production of specimens for testing coatings on cast iron
    Superseded by BS EN ISO 28764:2011
  • BS 1881-127:1990 Testing concrete. Method of verifying the performance of a concrete cube compression machine using the comparative cube test
    This standard has been withdrawn at the request of the committee as they feel this standard can no longer be maintained
  • BS 1881-205:1986 Testing concrete. Recommendations for radiography of concrete
    This standard has been withdrawn at the request of the committee as they feel this standard can no longer be maintained
  • BS 5554:1978 (IEC 60516:1977) Guide to a modular instrumentation system for data handling; CAMAC system
    This standard has been withdrawn as it is identical to IEC 60516:1977 which has been withdrawn by IEC
  • BS 5836:1980 (IEC 60552:1977) Guide to CAMAC: organization of multi-crate systems: specification of the Branch-highway and CAMAC crate controller Type A1
    This standard has been withdrawn as it is identical to IEC 60552:1977 which has been withdrawn by IEC
  • BS 6001-9:2002 Sampling procedures for inspection by attributes. Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
    Superseded by the dual numbered standard BS ISO 28801:2011, BS 6001-9:2011
  • BS 6048:1987 (ISO 3720:1986) Specification for black tea
    Superseded by BS ISO 3720:2011
  • BS 6827:1987 (ISO 8455:1986) Guide to storage and transport of green coffee in bags
    Superseded by BS ISO 8455:2011
  • BS 6911-13:1998 (ISO 6016:1998) Testing earth-moving machinery. Methods of measuring the masses of whole machines, their equipment and components
    Superseded by BS ISO 6016:2008
  • BS 7251-4:1997 (ISO 7206-2:1996) Orthopaedic joint prostheses. Specification for articulating surfaces made of metallic, ceramic and plastics materials of hip joint prostheses
    Superseded by BS ISO 7206-2:2011
  • BS 7652-2:1995 (ISO 11040-2:1994) Prefilled syringes. Specification for plungers and discs for dental local anaesthetic cartridges
    Superseded by BS ISO 11040-2:2011
  • BS 7987:2001+A1:2006 Road traffic signal systems
    Superseded by BS EN 50556:2011
  • DD CEN/TS 15747:2008 Solid recovered fuels. 14C-based methods for the determination of the biomass content
    Superseded by BS EN 15440:2011
  • BS EN 1043-2:1997 Destructive tests on welds in metallic materials. Hardness testing. Micro hardness testing on welded joints
    Superseded by BS EN ISO 9015-2:2011
  • BS EN 10246-1:1996 Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness
    Superseded by BS EN ISO 10893-1:2011
  • BS EN 10246-2:2000 Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
    Superseded by BS EN ISO 10893-1:2011
  • BS EN 10246-3:2000 Non-destructive testing of steel tubes. Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
    Superseded by BS EN ISO 10893-2:2011
  • BS EN 10246-4:2000 Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections
    Superseded by BS EN ISO 10893-3:2011
  • BS EN 10246-5:2000 Non-destructive testing of steel tubes. Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
    Superseded by BS EN ISO 10893-3:2011
  • BS EN 10246-6:2000 Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections
    Superseded by BS EN ISO 10893-10:2011
  • BS EN 10246-7:2005 Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
    Superseded by BS EN ISO 10893-10:2011
  • BS EN 10246-8:2000 Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
    Superseded by BS EN ISO 10893-11:2011
  • BS EN 10246-9:2000 Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
    Superseded by BS EN ISO 10893-11:2011
  • BS EN 10246-10:2000 Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
    Superseded by BS EN ISO 10893-6:2011
  • BS EN 10246-11:2000 Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
    Superseded by BS EN ISO 10893-4:2011
  • BS EN 10246-12:2000 Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
    Superseded by BS EN ISO 10893-5:2011
  • BS EN 10246-13:2000 Non-destructive testing of steel tubes. Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubes
    Superseded by BS EN ISO 10893-12:2011
  • BS EN 10246-14:2000 Non-destructive testing of steel tubes. Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
    Superseded by BS EN ISO 10893-8:2011
  • BS EN 10246-15:2000 Non-destructive testing of steel tubes. Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
    Superseded by BS EN ISO 10893-9:2011
  • BS EN 10246-16:2000 Non-destructive testing of steel tubes. Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
    Superseded by BS EN ISO 10893-8:2011
  • BS EN 10246-17:2000 Non-destructive testing of steel tubes. Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
    Superseded by BS EN ISO 10893-8:2011
  • BS EN 10246-18:2000 Non-destructive testing of steel tubes. Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections
    Superseded by BS EN ISO 10893-5:2011
  • BS EN 12052:2004 Health informatics. Digital imaging. Communication, workflow and data management
    Superseded by BS EN ISO 12052:2011
  • DD CEN ISO/TS 12180-1:2007 Geometrical product specifications (GPS). Cylindricity. Vocabulary and parameters of cylindrical form
    Superseded by BS EN ISO 12180-1:2011
  • DD CEN ISO/TS 12180-2:2007 Geometrical product specifications (GPS). Cylindricity. Specification operators
    Superseded by BS EN ISO 12180-2:2011
  • DD CEN ISO/TS 12181-1:2007 Geometrical product specifications (GPS). Roundness. Vocabulary and parameters of roundness
    Superseded by BS EN ISO 12181-1:2011
  • DD CEN ISO/TS 12181-2:2007 Geometrical product specifications (GPS). Roundness. Specification operators
    Superseded by BS EN ISO 12181-2:2011
  • BS EN 12373-9:1999 Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
    Superseded by BS EN ISO 8251:2011
  • BS EN 12373-10:1999 Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
    Superseded by BS EN ISO 8251:2011
  • DD CEN ISO/TS 12780-1:2007 Geometrical product specifications (GPS). Straightness. Vocabulary and parameters of straightness
    Superseded by BS EN ISO 12780-1:2011
  • DD CEN ISO/TS 12780-2:2007 Geometrical product specifications (GPS). Straightness. Specification operators
    Superseded by BS EN ISO 12780-2:2011
  • DD CEN ISO/TS 12781-1:2007 Geometrical product specifications (GPS). Flatness. Vocabulary and parameters of flatness
    Superseded by BS EN ISO 12781-1:2011
  • DD CEN ISO/TS 12781-2:2007 Geometrical product specifications (GPS). Flatness. Specification operators
    Superseded by BS EN ISO 12781-2:2011
  • BS EN 12967-1:2007 Health informatics. Service architecture. Enterprise viewpoint
    Superseded by BS EN ISO 12967-1:2011
  • BS EN 12967-2:2007 Health informatics. Service architecture. Information viewpoint
    Superseded by BS EN ISO 12967-2:2011
  • BS EN 12967-3:2007 Health informatics. Service architecture. Computational viewpoint
    Superseded by BS EN ISO 12967-3:2011
  • DD ENV ISO 14253-2:2001 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments. Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
    Superseded by BS EN ISO 14253-2:2011
  • BS EN 14431:2004 Vitreous and porcelain enamels. Characteristics of the enamel coatings applied to steel panels intended for architecture
    Superseded by BS EN ISO 28722:2011
  • BS EN 14863:2005 Vitreous and porcelain enamels. Determination of the edge covering of enamelled steel plate to be used in heat exchangers
    Superseded by BS EN ISO 28723:2011
  • BS EN 14866:2005 Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
    Superseded by BS EN ISO 28763:2011
  • BS EN 15159-1:2006 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for apparatus, components, appliances and accessories
    Superseded by BS EN ISO 28721-1:2011
  • BS EN 15159-2:2006 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Designation and specification of resistance to chemical attack and thermal shock
    Superseded by BS EN ISO 28721-2:2011
  • BS EN 15159-3:2006 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Thermal shock resistance
    Superseded by BS EN ISO 28721-3:2011
  • BS EN 15206:2007 Vitreous and porcelain enamels. Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron
    Superseded by BS EN ISO 28764:2011
  • BS EN 15282:2007 Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
    Superseded by BS EN ISO 28765:2011
  • DD CEN/TS 15440:2006 Solid recovered fuels. Method for the determination of biomass content
    Superseded by BS EN 15440:2011
  • BS EN 50106:1997 Specification for safety of household and similar electrical appliances. Particular rules for routine tests referring to appliances under the scope of BS EN 60335-1 and BS EN 60967
    Superseded by BS EN 50106:2008
  • BS EN 50291:2001 Electrical apparatus for the detection of carbon monoxide in domestic premises. Test methods and performance requirements
    Superseded by BS EN 50291-1:2010
  • BS EN 55025:2003 (CISPR 25:2002) Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices. Limits and methods of measurement
    Superseded by BS EN 55025:2008
  • BS EN 60034-3:2005 Rotating electrical machines. Specific requirements for cylindrical rotor synchronous machines
    Superseded by BS EN 60034-3:2008
  • BS EN 60289:1995 Reactors
    Superseded by BS EN 60076-6:2008
  • BS EN 60335-2-47:2003 Household and similar electrical appliances. Safety. Particular requirements for commercial electric boiling pans
    Superseded by BS EN 60335-2-47:2003+A1:2008
  • BS EN 60730-1:2001 Automatic electrical controls for household and similar use. General requirements
    Superseded by BS EN 60730-1:2000+A2:2008
  • BS EN 61386-1:2004 Conduit systems for cable management. General requirements
    Superseded by BS EN 61386-1:2008
  • BS EN 61986:2002 Rotating electrical machines. Equivalent loading and super-position techniques. Indirect testing to determine temperature rise
    Superseded by BS EN 60034-29:2008
  • BS ISO/IEC ISP 10615-3:1996 Information technology. International standardized profiles ADInn. OSI directory. ADI21. DSA performer role
    This standard has been withdrawn as the International Standard on which the implementation is based has been withdrawn
  • BS ISO 13804:1999 Vitreous and porcelain enamels for aluminium. Production of specimens for testing
    Superseded by BS EN ISO 28764:2011
  • BS AU 246:1992 (ISO 10392:1992) Method for determination of the centre of gravity of road vehicles with two axles
    Superseded by BS ISO 10392:2011

Published in international.