ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
    Revised to A213/A213M-11
  • A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
    Revised to A387/A387M-11
  • A648 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
    Revised to A648-11
  • A688/A688M Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
    Revised to A688/A688M-11
  • A803/A803M Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
    Revised to A803/A803M-11
  • A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
    Revised to A994-11
  • A1017/A1017M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
    Revised to A1017/A1017M-11
  • B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed
    Revised (with designation change) to B68/B68M-11
  • B68M Standard Specification for Seamless Copper Tube, Bright Annealed [Metric] (Withdrawn 2011) has been withdrawn and replaced by B68/B68M-11
  • B170 Standard Specification for Oxygen-Free Electrolytic Copper – Refinery Shapes
    Editorially changed, available as B170-99(2010)e1
  • B350/B350M Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
    Revised to B350/B350M-11
  • B374 Standard Terminology Relating to Electroplating
    Reapproved, available as B374-06(2011)
  • B653/B653M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings
    Revised to B653/B653M-11
  • B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe
    Revised to B658/B658M-11
  • B678 Standard Test Method for Solderability of Metallic-Coated Products
    Reapproved, available as B678-86(2011)
  • B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application
    Reapproved (with editorial change), available as B752-06(2011)e1
  • B842 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits
    Reapproved, available as B842-99(2011)
  • B883 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials
    Revised to B883-10
  • B884 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
    Revised to B884-11
  • C148 Standard Test Methods for Polariscopic Examination of Glass Containers
    Reapproved, available as C148-00(2011)
  • C539 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
    Reapproved, available as C539-84(2011)
  • C675 Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
    Reapproved, available as C675-91(2011)
  • C856 Standard Practice for Petrographic Examination of Hardened Concrete
    Revised to C856-11
  • C866 Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
    Revised to C866-11
  • C902 Standard Specification for Pedestrian and Light Traffic Paving Brick
    Editorially changed, available as C902-10e1
  • C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
    Revised to C1107/C1107M-11
  • D409/D409M Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
    Revised to D409/D409M-11
  • D748 Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
    Reapproved, available as D748-00(2011)
  • D906 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
    Reapproved, available as D906-98(2011)
  • D950 Standard Test Method for Impact Strength of Adhesive Bonds
    Reapproved, available as D950-03(2011)
  • D1067 Standard Test Methods for Acidity or Alkalinity of Water
    Revised to D1067-11
  • D1082 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
    Reapproved, available as D1082-00(2011)
  • D1120 Standard Test Method for Boiling Point of Engine Coolants
    Revised to D1120-11
  • D1144 Standard Practice for Determining Strength Development of Adhesive Bonds
    Reapproved, available as D1144-99(2011)
  • D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
    Reapproved, available as D1183-03(2011)
  • D1430 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
    Revised to D1430-11
  • D1582 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
    Reapproved, available as D1582-98(2011)
  • D1667 Standard Specification for Flexible Cellular Materials Poly (Vinyl Chloride) Foam (Closed-Cell)
    Reapproved, available as D1667-05(2011)
  • D1677 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
    Reapproved, available as D1677-02(2011)
  • D1971 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
    Revised to D1971-11
  • D2041/D2041M Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
    Revised (with designation change) to D2041/D2041M-11
  • D2172/D2172M Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
    Revised (with designation change) to D2172/D2172M-11
  • D2235 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
    Reapproved, available as D2235-04(2011)
  • D2339 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
    Reapproved, available as D2339-98(2011)
  • D2594 Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power
    Editorially changed, available as D2594-04(2008)e2
  • D2688 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
    Revised to D2688-11
  • D2846/D2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
    Editorially changed, available as D2846/D2846M-09be1
  • D2973 Standard Test Method for Total Nitrogen in Peat Materials
    Editorially changed, available as D2973-10e1
  • D3107 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
    Editorially changed, available as D3107-07e1
  • D3138 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
    Reapproved, available as D3138-04(2011)
  • D3164 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
    Reapproved, available as D3164-03(2011)
  • D3715/D3715M Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
    Reapproved, available as D3715/D3715M-98(2011)
  • D3776/D3776M Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
    Editorially changed, available as D3776/D3776M-09ae1
  • D3890 Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
    Reapproved, available as D3890-05(2010)
  • D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
    Revised to D3917-11
  • D3918 Standard Terminology Relating to Reinforced Plastic Pultruded Products
    Revised to D3918-11
  • D3939/D3939M Standard Test Method for Snagging Resistance of Fabrics (Mace)
    Revised to D3939/D3939M-11
  • D4000 Standard Classification System for Specifying Plastic Materials
    Revised to D4000-11
  • D4273 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
    Revised to D4273-11
  • D4327 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
    Revised to D4327-11
  • D4334 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
    Reapproved, available as D4334-05(2010)
  • D4335 Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
    Reapproved, available as D4335-99(2010)
  • D4336 Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
    Reapproved, available as D4336-05(2010)
  • D4338 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
    Reapproved (with editorial change), available as D4338-97(2011)e1
  • D4453 Standard Practice for Handling of High Purity Water Samples
    Revised (with title change) to D4453-11
  • D4519 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
    Revised to D4519-10
  • D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
    Revised (with title change) to D4549-11
  • D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
    Revised (with title change) to D4634-11
  • D4680 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
    Reapproved, available as D4680-98(2011)
  • D4778 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
    Revised to D4778-10
  • D4875 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
    Revised to D4875-11
  • D4926 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction
    Reapproved, available as D4926-06(2011)
  • D4956 Standard Specification for Retroreflective Sheeting for Traffic Control Editorial Review Board change D4956-11a
  • D4974 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
    Reapproved, available as D4974-04(2011)
  • D4975 Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
    Reapproved, available as D4975-04(2011)
  • D5040 Standard Test Methods for Ash Content of Adhesives
    Reapproved, available as D5040-90(2011)
  • D5113 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
    Reapproved (with editorial change), available as D5113-97(2011)e1
  • D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
    Revised to D5199-11
  • D5257 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
    Revised to D5257-11
  • D5264 Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
    Reapproved, available as D5264-98(2011)
  • D5338 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions. Incorporating Thermophilic Temperatures
    Revised (with title change) to D5338-11
  • D5375/D5375M Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
    Reapproved, available as D5375/D5375M-98(2011)
  • D5404/D5404M Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
    Revised (with designation change) to D5404/D5404M-11
  • D5426 Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints
    Editorially changed, available as D5426-08e1
  • D5470 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
    Reapproved, available as D5470-06(2011)
  • D5497 Standard Terminology Relating to Buttons (Withdrawn 2011) has been withdrawn and replaced by D2050-11
  • D5562 Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
    Reapproved, available as D5562-95(2011)
  • D5564 Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
    Reapproved, available as D5564-95(2011)
  • D5565 Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
    Reapproved, available as D5565-95(2011)
  • D5566 Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils
    Reapproved, available as D5566-95(2011)
  • D5591 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
    Reapproved, available as D5591-04(2011)
  • D5818 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
    Revised to D5818-11
  • D5824 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
    Reapproved, available as D5824-98(2011)
  • D5989 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
    Revised to D5989-11
  • D6100 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
    Revised (with title change) to D6100-11
  • D6195 Standard Test Methods for Loop Tack
    Reapproved, available as D6195-03(2011)
  • D6252/D6252M Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
    Reapproved, available as D6252/D6252M-98(2011)
  • D6255/D6255M Standard Specification for Steel or Aluminum Slotted Angle Crates
    Reapproved, available as D6255/D6255M-05(2011)
  • D6295/D6295M Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
    Reapproved, available as D6295/D6295M-98(2011)
  • D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
    Editorially changed, available as D6299-10e1
  • D6395 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
    Revised to D6395-11
  • D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
    Revised to D6455-11
  • D6507 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    Revised to D6507-11
  • D6534 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
    Reapproved, available as D6534-05(2010)
  • D6633 Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
    Reapproved, available as D6633-05(2010)
  • D6654 Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
    Reapproved, available as D6654-05(2010)
  • D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
    Revised to D6751-11a
  • D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
    Revised to D6767-11
  • D6816-02 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders (Withdrawn 2011)
    Withdrawn with no replacement.
  • D6864 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
    Revised to D6864-11
  • D6865 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&
    Revised (with title change) to D6865-11
  • D6866 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
    Revised to D6866-11
  • D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
    Revised to D7042-11
  • D7126 Standard Test Method for On-Line Colorimetric Measurement of Silica
    Revised to D7126-10
  • D7142 Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners
    Reapproved, available as D7142-05(2011)
  • D7148 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
    Reapproved, available as D7148-07(2011)
  • D7149 Standard Practice for Determining the Freeze Thaw Stability of Adhesives
    Reapproved (with editorial change), available as D7149-05(2011)e1
  • D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils – Fixed Range Injection Period, Constant Volume Combustion Chamber Method
    Revised to D7170-11
  • D7251 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
    Revised to D7251-11
  • D7298 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
    Editorially changed, available as D7298-06(2011)e1
  • D7331 Standard Practice for Sewn Products Marker Data Interchange
    Revised to D7331-11
  • D7444-11 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
    New standard, now available.
  • D7457-11 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
    New standard, now available.
  • D7586/D7586M-11 Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
    New standard, now available.
  • D7643-10 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
    New standard, now available.
  • D7652-11 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection
    New standard, now available.
  • D7669-11 Standard Guide for Practical Lubricant Condition Data Trend Analysis
    New standard, now available.
  • D7677-11 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
    New standard, now available.
  • D7678-11 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
    New standard, now available.
  • D7684-11 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
    New standard, now available.
  • D7685-11 Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
    New standard, now available.
  • D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
    New standard, now available.
  • D7698-11 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
    New standard, now available.
  • D7702-11 Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
    New standard, now available.
  • E37 Standard Test Methods for Chemical Analysis of Pig Lead
    Reapproved, available as E37-05(2011)
  • E274/E274M Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
    Revised (with designation change) to E274/E274M-11
  • E329 Standard Specification for Agencies Engaged in Construction Inspection, Special Inspection, or Testing Materials Used in Construction
    Revised to E329-11
  • E471 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
    Reapproved, available as E471-96(2011)
  • E556/E556M Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
    Revised (with designation change) to E556/E556M-11
  • E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
    Revised to E580/E580M-11
  • E698 Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
    Revised to E698-11
  • E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
    Revised to E1007-11
  • E1703/E1703M Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
    Revised to E1703/E1703M-10
  • E1859/E1859M Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
    Revised (with designation change) to E1859/E1859M-11
  • E1954 Standard Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
    Reapproved, available as E1954-05(2011)
  • E2063 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
    Reapproved, available as E2063-05(2011)
  • E2340/E2340M Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
    Revised (with designation change) to E2340/E2340M-11
  • E2388 Standard Guide for Minimum Training Requirements for Forensic Document Examiners
    Revised to E2388-11
  • E2394 Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
    Revised to E2394-11
  • E2690 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
    Editorially changed, available as E2690-10e2
  • E2710-11 Standard Guide for Preservation of Charred Documents
    New standard, now available.
  • E2800-11 Standard Practice for Characterization of Bacillus Spore Suspensions for Reference Materials
    New standard, now available.
  • E2811-11 Standard Practice for Management of Low Risk Property (LRP)
    New standard, now available.
  • F386 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
    Revised to F386-11
  • F387 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
    Revised to F387-11
  • F689 Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
    Reapproved, available as F689-97(2011)
  • F696 Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens
    Reapproved, available as F696-06(2011)
  • F1056 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
    Reapproved, available as F1056-04(2011)
  • F1162-02 Standard Specification for Pole Vault Landing Systems (Withdrawn 2011)
    Withdrawn with no replacement.
  • F1290 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
    Reapproved, available as F1290-98a(2011)
  • F1305-94(2002) Standard Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses (Withdrawn 2011)
    Withdrawn with no replacement.
  • F1343-02 Standard Specification for Anesthetic Gas Scavenging Systems-Transfer and Receiving Systems (Withdrawn 2011)
    Withdrawn with no replacement.
  • F1511 Standard Specification for Mechanical Seals for Shipboard Pump Applications
    Revised to F1511-11
  • F1635 Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
    Revised to F1635-11
  • F1672 Standard Specification for Resurfacing Patellar Prosthesis
    Reapproved, available as F1672-95(2011)
  • F1674 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
    Revised to F1674-11
  • F1750 Specification for Paintball Marker Threaded-Propellant Source Interface
    Revised to F1750-11
  • F1760 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
    Reapproved, available as F1760-01(2011)
  • F1777 Standard Practice for Paintball Field Operation
    Revised to F1777-11
  • F1884 Standard Test Method for Determining Residual Solvents in Packaging Materials
    Reapproved, available as F1884-04(2011)
  • F1924 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
    Reapproved, available as F1924-05(2011)
  • F1931-98(2004) Standard Test Method for Characterization of Gymnastic Landing Mats and Floor Exercise Surfaces (Withdrawn 2011)
    Withdrawn with no replacement.
  • F1948 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
    Reapproved, available as F1948-05(2011)
  • F2009 Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
    Reapproved, available as F2009-00(2011)
  • F2030 Standard Specification for Paintball Cylinder Burst Disk Assemblies
    Revised to F2030-11
  • F2100 Standard Specification for Performance of Materials Used in Medical Face Masks
    Revised to F2100-11
  • F2112 Standard Terminology for Membrane Switches
    Reapproved, available as F2112-02(2011)
  • F2187 Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
    Reapproved, available as F2187-02(2011)
  • F2188 Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
    Reapproved, available as F2188-02(2011)
  • F2247 Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
    Revised to F2247-11
  • F2271 Standard Specification for Paintball Marker Barrel Blocking Devices
    Revised to F2271-11
  • F2356 Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
    Reapproved, available as F2356-05a(2010)
  • F2391 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
    Reapproved, available as F2391-05(2011)
  • F2427 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
    Reapproved, available as F2427-05a(2010)
  • F2440 Standard Specification for Indoor Wall/Feature Padding
    Revised to F2440-11
  • F2453/F2453M Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
    Reapproved (with editorial change), available as F2453/F2453M-05(2011)e1
  • F2460 Standard Practice for Special Requirements for Bumper Boats
    Revised to F2460-11
  • F2507 Standard Specification for Recreational Airpark Design
    Reapproved, available as F2507-05(2010)
  • F2508-11 Standard Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces
    New standard, now available.
  • F2536 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
    Reapproved, available as F2536-06b(2011)
  • F2538 Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft
    Reapproved, available as F2538-07a(2010)
  • F2563 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
    Reapproved, available as F2563-06(2010)
  • F2573 Standard Specification for Low Velocity Resilient Material Projectile
    Reapproved, available as F2573-06(2010)
  • F2574 Standard Specification for Low Velocity Projectile Marker
    Reapproved, available as F2574-06(2010)
  • F2806 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
    Editorially changed, available as F2806-10e1
  • F2840-11 Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
    New standard, now available.
  • F2885-11 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
    New standard, now available.
  • F2899-11 Standard Specification for Condition 1 Bicycle Forks
    New standard, now available.
  • F2900-11 Standard Guide for Characterization of Hydrogels used in Regenerative Medicine
    New standard, now available.
  • F2903-11 Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair
    New standard, now available.
  • G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
    Reapproved, available as G39-99(2011)
  • G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
    Reapproved, available as G49-85(2011)
  • G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
    Reapproved, available as G58-85(2011)
  • G86 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
    Reapproved, available as G86-98a(2011)
  • G93 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
    Reapproved, available as G93-03(2011)
  • G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
    Reapproved, available as G103-97(2011)
  • G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
    Reapproved, available as G123-00(2011)
  • G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
    Reapproved, available as G142-98(2011)
  • G175 Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
    Reapproved, available as G175-03(2011)
  • G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
    Reapproved, available as G186-05(2011)
  • G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
    Reapproved, available as G188-05(2011)
  • G198-11 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
    New standard, now available.
  • NACE/ASTM G193 Standard Terminology and Acronyms Relating to Corrosion
    Revised to NACE/ASTM G193-11

Published in international.