ISO PUBLICATIONS

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email mailto:enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO/TR 945-2:2011 Microstructure of cast irons. Graphite classification by image analysis
  • ISO 3405:2011 (Edition 4) Petroleum products. Determination of distillation characteristics at atmospheric pressure
  • ISO 3581:2003 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
    AMENDMENT 1:January 2011
  • ISO 3656:2011 (Edition 4) Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction
  • ISO 3927:2011 (Edition 4) Metallic powders, excluding powders for hardmetals. Determination of compressibility in uniaxial compression
  • ISO 4999:2011 (Edition 5) Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
  • ISO 5000:2011 (Edition 4) Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
  • ISO 5264-2:2011 (Edition 3) Pulps. Laboratory beating PFI mill method
  • ISO 7116:2011 (Edition 3) Mopeds. Measurement method for determining maximum speed
  • ISO 8251:2011 (Edition 2) Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
  • ISO/IEC 10373-6:2011 (Edition 2) Identification cards. Test methods. Proximity cards
  • ISO/TS 10674:2011 Rating services. Assessment of creditworthiness of non-listed entities
  • ISO 10845-2:2011 Construction procurement. Formatting and compilation of procurement documentation
  • ISO 10845-3:2011 Construction procurement. Standard conditions of tender
  • ISO 10845-4:2011 Construction procurement. Standard conditions for the calling for expressions of interest
  • ISO 10845-5:2011 Construction procurement. Participation of targeted enterprises in contracts
  • ISO 10845-6:2011 Construction procurement. Participation of targeted partners in joint ventures in contracts
  • ISO 10845-7:2011 Construction procurement. Participation of local enterprises and labour in contracts
  • ISO 10845-8:2011 Construction procurement. Participation of targeted labour in contracts
  • ISO/TS 11133-2:2003 Microbiology of food and animal feeding stuffs. Guidelines on preparation and production of culture media. Practical guidelines on performance testing of culture media
    AMENDMENT 1:February 2011
  • ISO 11925-2:2010 Reaction to fire tests. Ignitability of products subjected to direct impingement of flame. Single-flame source test
    CORRIGENDUM 1:January 2011
  • ISO 12251:2011 Diesel engines. Clamp mounted CR fuel injectors. Mounting dimensions
  • ISO 12623:2011 Thermal insulating products for building equipment and industrial installations. Determination of short-term water absorption by partial immersion of preformed pipe insulation
  • ISO 12624:2011 Thermal insulating products for building equipment and industrial installations. Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
  • ISO 12628:2011 Thermal insulating products for building equipment and industrial installations. Determination of dimensions, squareness and linearity of preformed pipe insulation
  • ISO 12629:2011 Thermal insulating products for building equipment and industrial installations. Determination of water vapour transmission properties of preformed pipe insulation
  • ISO 12756:1998 Drawing and writing instruments. Ball point pens and roller ball pens. Vocabulary
    AMENDMENT 1:February 2011
  • ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
    CORRIGENDUM 1:February 2011
  • ISO 14125:1998 Fibre-reinforced plastic composites. Determination of flexural properties
    AMENDMENT 1:February 2011
  • ISO 14155:2011 (Edition 2) Clinical investigation of medical devices for human subjects. Good clinical practice
  • ISO/IEC 15444-1:2004 Information technology. JPEG 2000 image coding system. Core coding system
    AMENDMENT 3:December 2010
  • ISO 15621:2011 (Edition 2) Urine-absorbing aids. General guidelines on evaluation
  • ISO 15626:2011 Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
  • ISO/IEC 16022:2006 Information technology. Automatic identification and data capture techniques. Data matrix bar code symbology specification
    CORRIGENDUM 2:February 2011
  • ISO 16653-3:2011 Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features. MEWPs for orchard operations
  • ISO/IEC 17021:2011 (Edition 2) Conformity assessment. Requirements for bodies providing audit and certification of management systems
  • ISO/IEC TR 18047-6:2011 (Edition 3) Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications at 860 MHz to 960 MHz
  • ISO/IEC 19788-1:2011 Information technology. Learning, education and training. Metadata for learning resources. Framework
  • ISO/IEC 19794-8:2006 Information technology. Biometric data interchange formats. Finger pattern skeletal data
    CORRIGENDUM 1:February 2011
  • ISO 20783-1:2011 (Edition 2) Petroleum and related products. Determination of emulsion stability of fire-resistant fluids. Fluids in category HFAE
  • ISO/IEC 23000-5:2011 (Edition 2) Information technology. Multimedia application format (MPEG-A). Media streaming application format
  • ISO/IEC 23006-3:2011 Information technology. MPEG extensible middleware (MXM). MXM reference software
  • ISO 24503:2011 Ergonomics. Accessible design. Tactile dots and bars on consumer products. Guidelines for all people, including elderly persons and persons with disabilities
  • ISO 28080:2011 Hardmetals. Abrasion tests for hardmetals
  • ISO 28399:2011 Dentistry. Products for external tooth bleaching
  • ISO 28927-11:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Stone hammers
  • ISO 29042-8:2011 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Room method for the measurement of the pollutant concentration parameter
  • ISO 29042-9:2011 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Decontamination index
  • ISO/IEC 29110-2:2011 Software engineering. Lifecycle profiles for Very Small Entities (VSEs). Framework and taxonomy
  • ISO/IEC 29110-4-1:2011 Software engineering. Lifecycle profiles for Very Small Entities (VSEs). Profile specifications. Generic profile group
  • ISO 29283:2011 ITS CALM Mobile Wireless Broadband applications using communications in accordance with IEEE 802.20

Published in international.