BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 434-1:2011 Bitumen road emulsions. Specification for anionic bitumen road emulsions
    Supersedes BS 434-1:1984
  • BS 5306-0:2011 Fire protection installations and equipment on premises. Guide for selection of installed systems and other fire equipment
    Supersedes BS 5306-0:1986+A2:1991
  • BS 5839-9:2011 Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems
    Supersedes BS 5839-9:2003
  • BS 7942:2011 Thermostatic mixing valves for use in care establishments. Requirements and test methods
    Supersedes BS 7942:2000
  • BS 8000-11:2011 Workmanship on building sites. Internal and external wall and floor tiling. Ceramic and agglomerated stone tiles, natural stone and terrazzo tiles and slabs, and mosaics. Code of practice
    Supersedes BS 8000-11.1:1989 and BS 8000-11.2:1990
  • BS 8452 :2010 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide
    Supersedes BS 8452:2005
  • BS 8468-5:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents. Dual-mode apparatus. Specification
  • BS 8468-6.1:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents. Positive-pressure compressed airline equipment. Specification
  • BS 8468-6.2:2011 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents. Constant flow compressed airline equipment. Specification
  • BS 22475-2:2011 Geotechnical investigation and testing. Sampling methods and groundwater measurements. Qualification criteria for enterprises and personnel
    Supersedes DD CEN ISO/TS 22475-2:2006
  • BS 22475-3:2011 Geotechnical investigation and testing. Sampling methods and groundwater measurements. Conformity assessment of enterprises and personnel by third party
    Supersedes DD CEN ISO/TS 22475-3:2007

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 81-41:2010 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Vertical lifting platforms intended for use by persons with impaired mobility
  • BS EN ISO 178:2010 Plastics. Determination of flexural properties
    Supersedes BS EN ISO 178:2003
  • BS EN 459-1:2010 Building lime. Definitions, specifications and conformity criteria
    Supersedes BS EN 459-1:2001
  • BS EN 476:2011 General requirements for components used in drains and sewers
    Supersedes BS EN 476:1998, BS EN 773:1999 and BS EN 1293:1999
  • BS EN ISO 877-1:2010 Plastics. Methods of exposure to solar radiation. General guidance
    Supersedes the dual numbered standard BS EN ISO 877:1997, BS 2782-5:Method 550B:1996
  • BS EN ISO 877-2:2010 Plastics. Methods of exposure to solar radiation. Direct weathering and exposure behind window glass
    Supersedes the dual numbered standard BS EN ISO 877:1997, BS 2782-5:Method 550B:1996
  • BS EN ISO 877-3:2010 Plastics. Methods of exposure to solar radiation. Intensified weathering using concentrated solar radiation
    Supersedes the dual numbered standard BS EN ISO 877:1997, BS 2782-5:Method 550B:1996
  • BS EN 1110:2010 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature
    Supersedes BS EN 1110:2000
  • BS EN ISO 1519:2011 Paints and varnishes. Bend test (cylindrical mandrel)
    Supersedes the dual numbered standard BS EN ISO 1519:2002, BS 3900-E1:2002
  • BS EN 1865-2:2010 Patient handling equipment used in road ambulances. Power assisted stretcher
    Supersedes BS EN 1865:2000 which remains current
  • BS EN 2481:2010 Aerospace series. Steel FE-PL2108 (35NiCrMo16). 1250 MPa ? Rm ? 1400 MPa. Forgings. De ? 75 mm
  • BS EN 2482:2010 Aerospace series. Steel FE-PL2108 (35NiCrMo16). 1100 MPa ? Rm ? 1300 MPa. Bars. De ? 100 mm
  • BS EN 2483:2010 Aerospace series. Steel FE-PL2108 (35NiCrMo16). 1100 MPa ? Rm ? 1300 MPa. Forgings. De ? 100 mm
  • BS EN 3197:2010 Aerospace series. Design and installation of aircraft electrical and optical interconnection systems
  • BS EN ISO 3613:2010 Metallic and other inorganic coatings. Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods
    Supersedes BS EN ISO 3613:2001
  • BS EN 3687:2010 Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1100 MPa/650°C
  • BS EN ISO 3744:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
    Supersedes BS EN ISO 3744:2009
  • BS EN ISO 3747:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
    Supersedes BS EN ISO 3747:2009
  • BS EN ISO 4254-11:2010 Agricultural machinery. Safety. Pick-up balers
    Supersedes BS EN 704:1999+A1:2009
  • BS EN ISO 4404-2:2010 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Non-aqueous fluids
    Supersedes BS EN ISO 4404-2:2003
  • BS EN ISO 4534:2010 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
  • BS EN ISO 4611:2010 Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist
    Supersedes BS EN ISO 4611:2008
  • BS EN 4658:2010 Aerospace series. Steel FE-PM1507 (X1 CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ? 200 mm. Rm ? 1520 MPa
  • BS EN 4659:2010 Aerospace series. Steel FE-PM1507 (X1 CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ? 200 mm. Rm ? 1650 MPa
  • BS EN ISO 8253-1:2010 Acoustics. Audiometric test methods. Pure-tone air and bone conduction audiometry
    Supersedes BS 6655:1986 and BS EN ISO 8253-1:1998
  • BS EN ISO 10801:2010 Nanotechnologies. Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
  • BS EN ISO 10808:2010 Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
  • BS EN ISO 10848-4:2010 Acoustics. Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms. Application to junctions with at least one heavy element
  • BS EN ISO 11337:2010 Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography
    Supersedes BS EN ISO 11337:2004
  • BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
    Supersedes BS EN 1712:1997
  • BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
  • BS EN 12115:2011 Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
    Supersedes BS EN 12115:2000
  • BS EN 12601:2010 Reciprocating internal combustion engine driven generating sets. Safety
    Supersedes BS EN 12601:2001
  • BS EN ISO 12625-8:2010 Tissue paper and tissue products. Water absorption time and water-absorption capacity, basket-immersion test method
    Supersedes BS EN ISO 12625-8:2006
  • BS EN ISO 12690:2010 Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities
    Supersedes BS EN 13214:2001
  • BS EN ISO 12737:2010 Metallic materials. Determination of plane-strain fracture toughness
    Supersedes BS EN ISO 12737:2005
  • BS EN 12812:2008 Falsework. Performance requirements and general design
    Supersedes BS EN 12812:2004
  • BS EN 12816:2010 LPG equipment and accessories. Transportable refillable LPG cylinders. Disposal
    Supersedes BS EN 12816:2001
  • BS EN ISO 12952-1:2010 Textiles. Assessment of the ignitability of bedding items. Ignition source. Smouldering cigarette
    Supersedes BS EN ISO 12952-1:1999 and BS EN ISO 12952-2:1999
  • BS EN ISO 12952-2:2010 Textiles. Assessment of the ignitability of bedding items. Ignition source. Match-flame equivalent
    Supersedes BS EN ISO 12952-3:1999 and BS EN ISO 12952-4:1999
  • BS EN 13044-1:2011 Intermodal loading units. Marking. Markings for identification
    Supersedes BS EN 13044:2001 which remains current
  • BS EN 13044-2:2011 Intermodal loading units. Marking. Markings of swap bodies related to rail operation
    Supersedes BS EN 13044:2001 which remains current
  • BS EN 13084-1:2007 Free-standing chimneys. General requirements
    Supersedes BS EN 13084-1:2000
  • BS EN 13109:2010 LPG equipment and accessories. LPG tanks and drums. Disposal
    Supersedes BS EN 13109:2002
  • BS EN ISO 13365:2011 Leather. Chemical tests. Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography
  • BS EN 13634:2010 Protective footwear for motorcycle riders. Requirements and test methods
    Supersedes BS EN 13634:2002
  • BS EN ISO 14406:2010 Geometrical product specifications (GPS). Extraction
  • BS EN ISO 14921:2010 Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components
    Supersedes BS EN ISO 14921:2001
  • BS EN 15210-2:2010 Solid biofuels. Determination of mechanical durability of pellets and briquettes. Briquettes
    Supersedes DD CEN/TS 15210-2:2005
  • BS EN 15807:2011 Railway applications. Pneumatic half couplings
  • BS EN 15962:2011 Fertilizers. Determination of the complexed micro-nutrient content and of the complexed fraction of micro-nutrients
  • BS EN ISO 16591:2010 (BS 2000-373:2010) Petroleum products. Determination of sulfur content. Oxidative microcoulometry method
  • BS EN ISO 17640:2010 Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment
    Supersedes BS EN 1714:1998
  • BS EN ISO 18274:2010 Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
    Supersedes BS EN ISO 18274:2004
  • BS EN ISO 19142:2010 Geographic information. Web feature service
  • BS EN ISO 19901-3:2010 Petroleum and natural gas industries. Specific requirements for offshore structures. Topsides structure
  • BS EN ISO 20843:2011 Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
    Supersedes BS EN ISO 20843:2003
  • BS EN ISO 24501:2010 Ergonomics. Accessible design. Sound pressure levels of auditory signals for consumer products
  • BS EN ISO 24502:2010 Ergonomics. Accessible design. Specification of age-related luminance contrast for coloured light
  • BS EN ISO 27020:2010 Dentistry. Brackets and tubes for use in orthodontics
  • BS EN ISO 28460:2010 Petroleum and natural gas industries. Installation and equipment for liquefied natural gas. Ship-to-shore interface and port operations
    Supersedes BS EN 1532:1997
  • BS EN ISO 32100:2010 Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method
  • BS EN 55024:2010 Information technology equipment. Immunity characteristics. Limits and methods of measurement
    Supersedes BS EN 55024:1998+A2:2003 which remains current
  • BS EN 60034-18-32:2010 Rotating electrical machines. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation by electrical endurance
  • BS EN 60060-1:2010 High-voltage test techniques. General definitions and test requirements
    Supersedes BS 923-1:1990
  • BS EN 60122-3:2010 Quartz crystal units of assessed quality. Standard outlines and lead connections
    Supersedes BS EN 60122-3:2001
  • BS EN 60349-2:2010 Electrical traction. Rotating electrical machines for rail and road vehicles. Electronic converter-fed alternating current motors
    Supersedes BS EN 60349-2:2001
  • BS EN 60684-3-280:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, anti-tracking
  • BS EN 60684-3-281:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, semiconductive
  • BS EN 60684-3-282:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving. Stress control
  • BS EN 60684-3-283:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, for bus-bar insulation
  • BS EN 60730-2-9:2010 Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls
    Supersedes BS EN 60730-2-9:2002 which remains current
  • BS EN 60745-2-5:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for circular saws
    Supersedes BS EN 60745-2-5:2007+A11:2009 which remains current
  • BS EN 60749-15:2010 Semiconductor devices. Mechanical and climatic test methods. Resistance to soldering temperature for through-hole mounted devices
    Supersedes BS EN 60749-15:2003
  • BS EN 60749-34:2010 Semiconductor devices. Mechanical and climatic test methods. Power cycling
    Supersedes BS EN 60749-34:2004
  • BS EN 61020-1:2009 Electromechanical switches for use in electrical and electronic equipment. Generic specification
    Supersedes BS EN 196000:1993, BS EN 196103:2000, BS EN 196500:1993 and BS QC 960000:1992
  • BS EN 61058-2-1:2011 Switches for appliances. Particular requirements for cord switches
    Supersedes BS EN 61058-2-1:1993 which remains current
  • BS EN 61162-1:2011 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Single talker and multiple listeners
    Supersedes BS EN 61162-1:2008
  • BS EN 61210:2010 Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
    Supersedes BS EN 61210:1995 which remains current
  • BS EN 61850-7-2:2010 Communication networks and systems for power utility automation. Basic information and communication structure. Abstract communication service interface (ACSI)
    Supersedes BS EN 61850-7-2:2003
  • BS EN 62041:2010 Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements
    Supersedes BS EN 62041:2003 which remains current

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 2631-1:1997 Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration. General Requirements
  • BS ISO 3343:2010 Reinforcement yarns. Determination of twist balance index
  • BS ISO 3575:2011 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
    Supersedes BS ISO 3575:2005
  • BS ISO 4081:2010 Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
    Supersedes BS ISO 4081:2005
  • BS ISO 4602:2010 Reinforcements. Woven fabrics. Determination of number of yarns per unit length of warp and weft
    Supersedes BS ISO 4602:1997
  • BS ISO 4998:2011 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
    Supersedes BS ISO 4998:2005
  • BS ISO 5753-2:2010 Rolling bearings. Internal clearance. Axial internal clearance for four-point-contact ball bearings
  • BS ISO 6731:2010 Milk, cream and evaporated milk. Determination of total solids content (Reference method)
    Supersedes BS 1741-2:1990
  • BS ISO 6734:2010 Sweetened condensed milk. Determination of total solids content (Reference method)
    Supersedes BS 1742-2:1990
  • BS ISO 8820-4:2010 Road vehicles. Fuse-links. Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
  • BS ISO 9717:2010 Metallic and other inorganic coatings. Phosphate conversion coating of metals
  • BS ISO/IEC 9796-2:2010 Information technology. Security techniques. Digital signature schemes giving message recovery. Integer factorization based mechanisms
    Supersedes BS ISO/IEC 9796-2:2002+A1:2008
  • BS ISO 10302-1:2011 Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices. Airborne noise measurement
    Supersedes BS 848-2.6:2000
  • BS ISO 10804:2010 Restrained joint systems for ductile iron pipelines. Design rules and type testing
  • BS ISO 11382:2010 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
  • BS ISO 12643-2:2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Prepress and press equipment and systems
    Supersedes BS ISO 12643-2:2007
  • BS ISO 14531-3:2010 Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for mechanical jointing (including PE-X/metal transitions)
    Supersedes BS ISO 14531-3:2006
  • BS ISO 14788:2011 Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
    Supersedes BS ISO 14788:2005
  • BS ISO 15031-1:2010 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. General information and use case definition
  • BS ISO 15064:2010 Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio in toluenediisocyanate
    Supersedes BS ISO 15064:2004
  • BS ISO 16160:2011 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
    Supersedes BS ISO 16160:2005
  • BS ISO 16532-3:2010 Paper and board. Determination of grease resistance. Turpentine test for voids in glassine and greaseproof papers
  • BS ISO 17573:2010 Electronic fee collection. Systems architecture for vehicle-related tolling
    Supersedes DD CEN ISO/TS 17573:2003
  • BS ISO/IEC 19795-7:2011 Information technology. Biometric performance testing and reporting. Testing of on-card biometric comparison algorithms
  • BS ISO 21216:2011 Intelligent transport systems. Wireless communications. CALM using millimeter communications. Air interface
  • BS ISO 24099:2011 Navigation data delivery structures and protocols
  • BS ISO/IEC 24709-3:2011 Information technology. Conformance testing for the biometric application programming interface (BioAPI). Test assertions for BioAPI frameworks
  • BS ISO/IEC 29109-10:2010 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Hand geometry silhouette data
  • BS ISO 29941:2010 Condoms. Determination of nitrosamines migrating from natural rubber latex condoms
  • BS ISO 30011:2010 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry

PUBLISHED DOCUMENTS

  • PD CEN/TR 852:2010 Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Guidance on the interpretation of laboratory derived migration values
  • PD 6705-2:2010 Structural use of steel and aluminium. Recommendations for the execution of steel bridges to BS EN 1090-2
  • PD CLC/TR 50538:2010 Guide to EMC Directive conformity of equipment designed for military purposes
    Supersedes PD R210-008:2002
  • PD CLC/TR 61158-1:2010 Industrial communication networks. Fieldbus specifications. Overview and guidance for the IEC 61158 and IEC 61784 series
    Supersedes PD CLC/TR 61158-1:2008

AEROSPACE SERIES

  • BS 2HR 209:2011 Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (Nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)
    Supersedes BS HR 209:1989
  • BS 2HR 240:2011 Specification for cobalt-chromium-tungsten-nickel- manganese heat-resisting alloy plate, sheet and strip (Cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)
    Supersedes BS HR 240:1972
  • BS 3HR 401:2011 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
    Supersedes BS 2HR 401:1973
  • BS 2HR 402:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Co 18.0, Ti2.5, Al 1.5)
    Supersedes BS HR 402:1973
  • BS 2HR 403:2011 Specification for nickel-chromium-titanium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 0.4)
    Supersedes BS HR 403:1973
  • BS 2HR 404:2011 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
    Supersedes BS HR 404:1973
  • BS 3HR 501:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
    Supersedes BS 2HR 501:1973
  • BS 3HR 502:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution treated wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
    Supersedes BS 2HR 502:1973
  • BS 3HR 503:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm diameter)
    Supersedes BS 2HR 503:1973
  • BS 3HR 504:2011 Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor sectional dimension 20 mm) (Nickel base, Cr 19.5, Ti 0.4)
    Supersedes BS 2HR 504:1973
  • BS 2HR 650:2011 Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)
    Supersedes BS HR 650:1972

CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 3900-F4:1968 Methods of test for paints. Resistance to continuous salt spray
    CORRIGENDUM 1
  • BS EN 228:2008 Automotive fuels. Unleaded petrol. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 1991-1-4:2005+A1:2010 Eurocode 1. Actions on structures. General actions. Wind actions
    AMENDMENT 1
  • BS EN 1993-4-1:2007 Eurocode 3. Design of steel structures. Silos
    CORRIGENDUM 2
  • BS EN 1998-1:2004 Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings
    CORRIGENDUM 2
  • BS EN ISO 10156:2010 Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
    CORRIGENDUM 1
  • BS EN ISO 12100:2010 Safety of machinery. General principles for design. Risk assessment and risk reduction
    CORRIGENDUM 1
  • BS EN ISO 12567-1:2010 Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method. Complete windows and doors
    CORRIGENDUM 1
  • BS EN 13715:2006+A1:2010 Railway applications. Wheelsets and bogies. Wheels. Tread profile
    AMENDMENT 1
  • BS EN ISO 13982-1:2004+A1:2010 Protective clothing for use against solid particulates. Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
    AMENDMENT 1
  • BS EN 15461:2008+A1:2010 Railway applications. Noise emission. Characterization of the dynamic properties of track selections for pass by noise measurements
    AMENDMENT 1
  • BS EN 15551:2009+A1:2010 Railway applications. Railway rolling stock. Buffers
    AMENDMENT 1
  • BS EN 15566:2009+A1:2010 Railway applications. Railway rolling stock. Draw gear and screw coupling
    AMENDMENT 1
  • BS EN 15624:2008+A1:2010 Railway applications. Braking. Empty-loaded changeover devices
    AMENDMENT 1
  • BS EN 15625:2008+A1:2010 Railway applications. Braking. Automatic variable load sensing devices
    AMENDMENT 1
  • BS EN ISO 15877-1:2009+A1:2010 Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). General
    AMENDMENT 1
  • BS EN ISO 15877-2:2009+A1:2010 Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Pipes
    AMENDMENT 1
  • BS EN ISO 15877-3:2009+A1:2010 Plastics piping systems for hot and cold water installations Chlorinated poly(vinyl chloride) (PVC-C). Fittings
    AMENDMENT 1
  • BS EN ISO 15877-5:2009+A1:2010 Plastics piping systems for hot and cold water installations. Chlorinated poly (vinyl chloride) (PVC-C). Fitness for purpose of the system
    AMENDMENT 1
  • BS EN ISO 24333:2009 Cereals and cereal products. Sampling
    CORRIGENDUM 1
  • BS EN 50122-2:2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Provisions against the effects of stray currents caused by D.C. traction systems
    CORRIGENDUM 1
  • BS EN 50122-3:2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Mutual interaction of A.C. and D.C. traction systems
    CORRIGENDUM 1
  • BS EN 50290-2-24:2002+A1:2008 Communication cables. Common design rules and construction. PE sheathing
    CORRIGENDUM 1
  • BS EN 60335-2-3:2002+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for electric irons
    AMENDMENT 11
  • BS EN 60335-2-6:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
    AMENDMENT 11
  • BS EN 60335-2-7:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for washing machines
    AMENDMENT 11
  • BS EN 60335-2-23:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin or hair care
    AMENDMENT 11
  • BS EN 60335-2-52:2003+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for oral hygiene appliances
    AMENDMENT 11
  • BS EN 60335-2-60:2003+A12:2010 Household and similar electrical appliances. Safety. Particular requirements for whirlpool baths and whirlpool spas
    AMENDMENT 12
  • BS EN 60335-2-89:2002+A2:2007 Household and similar electrical appliances. Safety. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
    CORRIGENDUM 1
  • BS EN 60335-2-105:2005+A11:2010 Household and similar electrical appliances. Safety. Particular requirements for multifunctional shower cabinets
    AMENDMENT 11
  • BS EN 60745-2-1:2003+A12:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for drills and impact drills
    AMENDMENT 12
  • BS EN 60745-2-2:2003+A12:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for screwdrivers and impact wrenches
    AMENDMENT 12
  • BS EN 61008-1:2004+A12:2009 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). General rules
    AMENDMENT 12
  • BS 2A 241:2005+A2:2011 General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater. Specification
    AMENDMENT 2
  • BS A 275-A 280:1981+A2:2011 Specification for hexagon self-locking nuts with non-metallic locking inserts. Metric series
    AMENDMENT 2
  • BS 3HR 2:2010+A1:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
    AMENDMENT 1
  • BS SP 10 & 11:1949+A3:2011 Specification for washers for aircraft purposes (primarily for facing purposes)
    AMENDMENT 3
  • NA to BS EN 1991-1-4:2005+A1:2010 UK National Annex to Eurocode 1. Actions on structures. General actions. Wind actions
    AMENDMENT 1

Published in international.