ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
    Editorially changed, available as A184/A184M-06e1
  • A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
    Revised to A193/A193M-11
  • A304 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
    Reapproved, available as A304-05(2011)
  • A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
    Revised to A320/A320M-11
  • A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
    Revised to A370-11
  • A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
    Revised to A392-11a
  • A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
    Revised to A426/A426M-11
  • A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
    Revised to A479/A479M-11
  • A482/A482M Standard Specification for Ferrochrome-Silicon
    Revised (with designation change) to A482/A482M-11
  • A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
    Revised to A491-11
  • A503/A503M Standard Specification for Ultrasonic Examination of Forged Crankshafts
    Reapproved, available as A503/A503M-01(2011)
  • A521/A521M Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
    Reapproved, available as A521/A521M-06(2011)
  • A522/A522M Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
    Revised to A522/A522M-11
  • A533/A533M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
    Editorially changed, available as A533/A533M-09e1
  • A560/A560M Standard Specification for Castings, Chromium-Nickel Alloy
    Revised to A560/A560M-11
  • A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
    Revised to A568/A568M-11a
  • A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
    Reapproved, available as A633/A633M-01(2011)
  • A646/A646M Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
    Reapproved, available as A646/A646M-06(2011)
  • A709/A709M Standard Specification for Structural Steel for Bridges
    Revised to A709/A709M-11
  • A772/A772M Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
    Reapproved, available as A772/A772M-00(2011)
  • A837/A837M Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
    Reapproved, available as A837/A837M-06(2011)
  • A840-06 Standard Specification for Fully Processed Magnetic Lamination Steel (Withdrawn 2011)
    Withdrawn with no replacement.
  • A842 Standard Specification for Compacted Graphite Iron Castings
    Revised to A842-11a
  • A848 Standard Specification for Low-Carbon Magnetic Iron
    Reapproved, available as A848-01(2011)
  • A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
    Reapproved, available as A909/A909M-06(2011)
  • A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
    Reapproved, available as A945/A945M-06(2011)
  • A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
    Revised to A955/A955M-11
  • A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
    Revised to A957/A957M-11
  • A961/A961M Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
    Revised to A961/A961M-11
  • A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
    Revised to A962/A962M-11
  • A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
    Revised to A985/A985M-11
  • A988/A988M Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
    Revised to A988/A988M-11
  • A989/A989M Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
    Revised to A989/A989M-11
  • A990 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
    Revised to A990-11
  • A992/A992M Standard Specification for Structural Steel Shapes
    Revised to A992/A992M-11
  • A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
    Revised to A999/A999M-11
  • A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
    Revised to A1016/A1016M-11a
  • B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
    Revised to B5-11
  • B92/B92M Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
    Revised to B92/B92M-11
  • B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
    Revised to B179-11
  • B372 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube
    Revised to B372-11
  • B386 Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip, and Foil
    Reapproved, available as B386-03(2011)
  • B430-97(2006)e1 Standard Test Method for Particle Size Distribution of Refractory Metal Powders and Related Compounds by Turbidimetry (Withdrawn 2011)
    Withdrawn with no replacement.
  • B434 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
    Reapproved, available as B434-06(2011)
  • B435 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
    Reapproved, available as B435-06(2011)
  • B440 Standard Specification for Cadmium
    Revised to B440-11
  • B535 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
    Reapproved, available as B535-06(2011)
  • B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
    Reapproved, available as B0572-06R11
  • B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
    Reapproved, available as B573-06(2011)
  • B595 Standard Specification for Sintered Aluminum Structural Parts
    Revised to B595-11
  • B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
    Reapproved, available as B621-02(2011)
  • B637 Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
    Reapproved, available as B637-06(2011)
  • B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength
    Revised to B686/B686M-11
  • B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
    Reapproved, available as B718-00(2011)
  • B722 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
    Reapproved, available as B722-06(2011)
  • B726 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
    Reapproved, available as B726-02(2011)
  • B744/B744M Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
    Reapproved, available as B744/B744M-05(2011)
  • B789/B789M Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
    Reapproved, available as B789/B789M-99(2011)
  • B805 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
    Reapproved, available as B805-06(2011)
  • B814 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
    Reapproved, available as B814-06(2011)
  • B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
    Reapproved, available as B815-02(2011)
  • B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
    Reapproved, available as B872-06(2011)
  • B946 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products
    Revised to B946-11
  • B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings
    Revised to B955/B955M-11
  • B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle
    Revised to B963-11
  • C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
    Reapproved, available as C59/C59M-00(2011)
  • C61/C61M Standard Specification for Gypsum Keene's Cement
    Reapproved, available as C61/C61M-00(2011)
  • C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
    Revised to C67-11
  • C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or 0 Cube Specimens)
    Revised to C109/C109M-11
  • C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement
    Revised to C114-11a
  • C150/C150M Standard Specification for Portland Cement
    Revised to C150/C150M-11
  • C187 Standard Test Method for Normal Consistency of Hydraulic Cement
    Revised to C187-11
  • C199 Standard Test Method for Pier Test for Refractory Mortars
    Reapproved, available as C199-84(2011)
  • C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
    Revised to C305-11
  • C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
    Revised to C553-11
  • C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
    Revised to C591-11
  • C595/C595M Standard Specification for Blended Hydraulic Cements
    Revised to C595/C595M-11
  • C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
    Revised to C739-11
  • C825 Standard Specification for Precast Concrete Barriers
    Reapproved, available as C825-06(2011)
  • C870 Standard Practice for Conditioning of Thermal Insulating Materials
    Revised to C870-11
  • C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
    Revised to C871-11
  • C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
    Reapproved, available as C890-06(2011)
  • C917 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
    Reapproved, available as C917-05(2011)
  • C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
    Revised to C1077-11a
  • C1093 Standard Practice for Accreditation of Testing Agencies for Masonry
    Revised to C1093-11
  • C1171 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
    Reapproved, available as C1171-05(2011)
  • C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone
    Reapproved, available as C1194-03(2011)
  • C1264 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board
    Reapproved, available as C1264-05(2011)
  • C1302 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
    Reapproved, available as C1302-04(2011)
  • C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
    Revised to C1393-11
  • C1400 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
    Revised to C1400-11
  • C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
    Revised to C1417-11
  • C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
    Revised to C1417M-11
  • C1600/C1600M Standard Specification for Rapid Hardening Hydraulic Cement
    Revised to C1600/C1600M-11
  • C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
    Reapproved, available as C1644-06(2011)
  • C1738-11 Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes
    New standard, now available.
  • C1741-11 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
    New standard, now available.
  • D50 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
    Reapproved, available as D50-90(2011)
  • D85 Standard Specification for Ochre Pigment
    Reapproved, available as D85-05(2011)
  • D210 Standard Specification for Bone Black Pigment
    Reapproved, available as D210-05(2011)
  • D263 Standard Specification for Chrome Oxide Green Pigment
    Reapproved, available as D263-05(2011)
  • D269 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
    Reapproved, available as D269-97(2011)
  • D301-95(2004) Standard Test Methods for Soluble Cellulose Nitrate (Withdrawn 2011)
    Withdrawn with no replacement.
  • D365 Standard Guide for Soluble Nitrocellulose Base Solutions
    Reapproved, available as D365-01(2011)
  • D476 Standard Classification for Dry Pigmentary Titanium Dioxide Products
    Reapproved, available as D476-00(2011)
  • D509 Standard Test Methods of Sampling and Grading Rosin
    Reapproved (with editorial change), available as D509-05(2011)e1
  • D520 Standard Specification for Zinc Dust Pigment
    Reapproved, available as D520-00(2011)
  • D596 Standard Guide for Reporting Results of Analysis of Water
    Reapproved, available as D596-01(2011)
  • D883 Standard Terminology Relating to Plastics
    Revised to D883-11
  • D910 Standard Specification for Aviation Gasolines
    Revised to D910-11
  • D1193 Standard Specification for Reagent Water
    Reapproved, available as D1193-06(2011)
  • D1245 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
    Revised to D1245-11
  • D1258-05 Standard Test Methods for High-Gravity Glycerin
    Withdrawn with no replacement.
  • D1264 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
    Revised to D1264-11
  • D1291 Standard Practice for Estimation of Chlorine Demand of Water
    Reapproved, available as D1291-06(2011)
  • D1316 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
    Reapproved, available as D1316-06(2011)
  • D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
    Reapproved, available as D1318-00(2011)
  • D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
    Reinstated as D1331-11
  • D1336 Standard Test Method for Distortion of Yarn in Woven Fabrics
    Reapproved, available as D1336-07(2011)
  • D1343 Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
    Reapproved, available as D1343-95(2011)
  • D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
    Reapproved, available as D1360-98(2011)
  • D1478 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
    Revised to D1478-11
  • D1510 Standard Test Method for Carbon Black – Iodine Adsorption Number
    Revised to D1510-11a
  • D1578 Standard Test Method for Breaking Strength of Yarn in Skein Form
    Reapproved, available as D1578-93(2011)
  • D1585 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products
    Reapproved, available as D1585-96(2011)
  • D1612-05 Standard Test Method for Acetone in Methanol (Withdrawn 2011)
    Withdrawn with no replacement.
  • D1619 Standard Test Methods for Carbon Black – Sulfur Content
    Revised to D1619-11
  • D1666 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
    Revised (with title change) to D1666-11
  • D1696 Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
    Reapproved, available as D1696-95(2011)
  • D1726 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
    Revised to D1726-11
  • D1777 Standard Test Method for Thickness of Textile Materials
    Reapproved (with editorial change), available as D1777-96(2011)e1
  • D1926 Standard Test Methods for Carboxyl Content of Cellulose
    Reapproved, available as D1926-00(2011)
  • D2007 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
    Revised to D2007-11
  • D2132 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
    Revised to D2132-11
  • D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    Revised to D2244-11
  • D2245 Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints
    Reapproved, available as D2245-90(2011)
  • D2259 Standard Test Method for Shrinkage of Yarns
    Reapproved, available as D2259-02(2011)
  • D2272 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
    Revised to D2272-11
  • D2373 Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method
    Reapproved, available as D2373-05(2011)
  • D2374 Standard Test Method for Lead in Paint Driers by EDTA Method
    Reapproved, available as D2374-05(2011)
  • D2375 Standard Test Method for Manganese in Paint Driers by EDTA Method
    Reapproved, available as D2375-05(2011)
  • D2392 Standard Test Method for Color Of Dyed Aviation Gasolines
    Reapproved, available as D2392-96(2011)
  • D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
    Revised to D2487-11
  • D2621 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
    Reapproved, available as D2621-87(2011)
  • D2685 Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
    Revised to D2685-11
  • D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
    Revised to D2699-11
  • D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
    Revised to D2700-11
  • D2713 Standard Test Method for Dryness of Propane (Valve Freeze Method)
    Revised to D2713-11
  • D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
    Reapproved, available as D2724-07(2011)
  • D2793 Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
    Reapproved, available as D2793-99(2011)
  • D2797/D2797M Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
    Revised to D2797/D2797M-11
  • D2798 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
    Revised to D2798-11
  • D2822/D2822M Standard Specification for Asphalt Roof Cement, Asbestos Containing
    Reapproved (with editorial change), available as D2822/D2822M-05(2011)e1
  • D2823/D2823M Standard Specification for Asphalt Roof Coatings, Asbestos Containing
    Reapproved (with editorial change), available as D2823/D2823M-05(2011)e1
  • D2832 Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
    Reapproved, available as D2832-92(2011)
  • D2908 Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
    Reapproved, available as D2908-91(2011)
  • D2921 Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
    Reapproved, available as D2921-98(2011)
  • D2929 Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
    Reapproved, available as D2929-89(2011)
  • D3022 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
    Reapproved, available as D3022-84(2011)
  • D3107 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
    Reapproved, available as D3107-07(2011)
  • D3260 Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
    Reapproved, available as D3260-01(2011)
  • D3265 Standard Test Method for Carbon Black-Tint Strength
    Revised to D3265-11
  • D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
    Reapproved, available as D3278-96(2011)
  • D3284 Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
    Reapproved, available as D3284-05(2011)
  • D3322 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
    Reapproved, available as D3322-82(2011)
  • D3326 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
    Reapproved, available as D3326-07(2011)
  • D3362-05 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011)
    Withdrawn with no replacement.
  • D3363 Standard Test Method for Film Hardness by Pencil Test
    Reapproved, available as D3363-05(2011)
  • D3415 Standard Practice for Identificaiton of Waterborne Oils
    Reapproved, available as D3415-98(2011)
  • D3423/D3423M Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
    Reapproved (with editorial change), available as D3423/D3423M-84(2011)e1
  • D3466 Standard Test Method for Ignition Temperature of Granular Activated Carbon
    Reapproved, available as D3466-06(2011)
  • D3475 Standard Classification of Child-Resistant Packages
    Revised to D3475-11
  • D3499 Standard Test Method for Toughness of Wood-Based Structural Panels
    Revised to D3499-11
  • D3512/D3512M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
    Editorially changed, available as D3512/D3512M-10e2
  • D3516 Standard Test Methods for Ashing Cellulose
    Reapproved, available as D3516-89(2011)
  • D3541-05 Standard Specification for 2-Ethylhexyl Acrylate
    Withdrawn with no replacement.
  • D3547-05 Standard Specification for n-Butyl Acrylate (Withdrawn 2011)
    Withdrawn with no replacement.
  • D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
    Reapproved, available as D3605-00(2011)
  • D3636 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
    Revised to D3636-11
  • D3650 Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
    Reapproved, available as D3650-93(2011)
  • D3694 Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
    Reapproved, available as D3694-96(2011)
  • D3720 Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
    Reapproved, available as D3720-90(2011)
  • D3721 Standard Specification for Synthetic Red Iron Oxide Pigment
    Reapproved, available as D3721-05(2011)
  • D3722 Standard Specification for Natural Red and Brown Iron Oxide Pigments
    Reapproved, available as D3722-05(2011)
  • D3723 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
    Reapproved, available as D3723-05(2011)
  • D3732 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
    Reapproved, available as D3732-82(2011)
  • D3787 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
    Reapproved, available as D3787-07(2011)
  • D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts
    Reapproved (with editorial change), available as D3791/D3791M-04(2011)e1
  • D3806 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
    Reapproved, available as D3806-98(2011)
  • D3838 Standard Test Method for pH of Activated Carbon
    Reapproved, available as D3838-05(2011)
  • D3845-05 Standard Specification for Glacial Methacrylic Acid (Withdrawn 2011)
    Withdrawn with no replacement.
  • D3861 Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
    Reapproved, available as D3861-91(2011)
  • D3863 Standard Test Method for Retention Characteristics of 0.40 to 0.45-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
    Reapproved, available as D3863-87(2011)
  • D3871 Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
    Reapproved, available as D3871-84(2011)
  • D3872 Standard Test Method for Ferrous Iron in Iron Oxides
    Reapproved, available as D3872-05(2011)
  • D3921 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
    Reapproved, available as D3921-96(2011)
  • D3924 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
    Reapproved, available as D3924-80(2011)
  • D3926 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
    Reapproved, available as D3926-05(2011)
  • D3970 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
    Reapproved, available as D3970-05(2011)
  • D3973 Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
    Reapproved, available as D3973-85(2011)
  • D3988 Standard Test Method for Vanadium in Paint Driers by EDTA Method
    Reapproved, available as D3988-05(2011)
  • D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
    Reapproved, available as D4047-00(2011)
  • D4074/D4074M Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
    Revised to D4074/D4074M-11
  • D4077 Standard Specification for Cumene (Isopropylbenzene)
    Revised to D4077-11
  • D4171 Standard Specification for Fuel System Icing Inhibitors
    Revised to D4171-11
  • D4196 Standard Test Method for Confirming the Sterility of Membrane Filters
    Reapproved, available as D4196-05(2011)
  • D4198 Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
    Reapproved, available as D4198-82(2011)
  • D4199 Standard Test Methods for Autoclavability of Membrane Filters
    Reapproved, available as D4199-82(2011)
  • D4200 Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
    Reapproved, available as D4200-82(2011)
  • D4375 Standard Practice for Basic Statistics in Committee D-19 on Water
    Reapproved, available as D4375-96(2011)
  • D4399 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
    Reapproved, available as D4399-05(2011)
  • D4415-05 Standard Test Methods for Determination of Dimer in Acrylic Acid (Withdrawn 2011)
    Withdrawn with no replacement.
  • D4485 Standard Specification for Performance of Engine Oils
    Revised to D4485-11
  • D4489 Standard Practices for Sampling of Waterborne Oils
    Reapproved, available as D4489-95(2011)
  • D4607 Standard Test Method for Determination of Iodine Number of Activated Carbon
    Reapproved, available as D4607-94(2011)
  • D4774 Standard Specification for User Applied Drug Labels in Anesthesiology
    Revised to D4774-11
  • D4839 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
    Reapproved, available as D4839-03(2011)
  • D4866/D4866M Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
    Reapproved (with editorial change), available as D4866/D4866M-88(2011)e1
  • D4942 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
    Revised to D4942-11
  • D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
    Revised to D5006-11
  • D5009 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
    Reapproved, available as D5009-02(2011)
  • D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
    Revised to D5055-11
  • D5066 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
    Reapproved, available as D5066-91(2011)
  • D5175 Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
    Reapproved, available as D5175-91(2011)
  • D5241 Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
    Reapproved, available as D5241-92(2011)
  • D5275 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
    Revised to D5275-11
  • D5286 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
    Reapproved, available as D5286-01(2011)
  • D5315 Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
    Reapproved, available as D5315-04(2011)
  • D5316 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
    Reapproved, available as D5316-98(2011)
  • D5317 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
    Reapproved, available as D5317-98(2011)
  • D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
    Reapproved (with editorial change), available as D5405/D5405M-98(2011)e1
  • D5412 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
    Reapproved, available as D5412-93(2011)
  • D5456 Standard Specification for Evaluation of Structural Composite Lumber Products
    Revised to D5456-11
  • D5464 Standard Test Method for pH Measurement of Water of Low Conductivity
    Revised to D5464-11
  • D5531 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
    Reapproved, available as D5531-05(2011)
  • D5544 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
    Revised to D5544-11
  • D5618 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
    Reapproved, available as D5618-94(2011)
  • D5644 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
    Editorially changed, available as D5644-01(2008)e1
  • D5671 Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
    Reapproved, available as D5671-95(2011)
  • D5727/D5727M Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
    Reapproved (with editorial change), available as D5727/D5727M-00(2011)e1
  • D5788 Standard Guide for Spiking Organics into Aqueous Samples
    Reapproved, available as D5788-95(2011)
  • D5810 Standard Guide for Spiking into Aqueous Samples
    Reapproved, available as D5810-96(2011)
  • D5828 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
    Reapproved, available as D5828-97(2011)e1
  • D5851 Standard Guide for Planning and Implementing a Water Monitoring Program
    Reapproved, available as D5851-95(2011)
  • D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
    Reapproved, available as D5863-00a(2011)
  • D5909 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
    Reapproved, available as D5909-96a(2011)
  • D5919 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
    Reapproved, available as D5919-96(2011)
  • D5958 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
    Reapproved, available as D5958-99(2011)
  • D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
    Revised to D5967-11
  • D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
    Revised to D5969-11
  • D5986 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
    Reapproved, available as D5986-96(2011)
  • D6093 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
    Reapproved, available as D6093-97(2011)
  • D6104 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
    Reapproved, available as D6104-97(2011)
  • D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
    Revised to D6138-11
  • D6157 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
    Reapproved, available as D6157-97(2011)
  • D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
    Revised to D6167-11
  • D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    Revised to D6217-11
  • D6238 Standard Test Method for Total Oxygen Demand in Water
    Reapproved, available as D6238-98(2011)
  • D6251/D6251M Standard Specification for Wood-Cleated Panelboard Shipping Boxes
    Revised to D6251/D6251M-11
  • D6266 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
    Reapproved, available as D6266-00a(2011)
  • D6356/D6356M Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
    Reapproved (with editorial change), available as D6356/D6356M-98(2011)e1
  • D6379 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates – High Performance Liquid Chromatography Method with Refractive Index Detection
    Revised to D6379-11
  • D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
    Reapproved (with editorial change), available as D6383/D6383M-99(2011)e1
  • D6385 Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
    Reapproved, available as D6385-99(2011)
  • D6486 Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
    Reapproved, available as D6486-01(2011)
  • D6504 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
    Revised to D6504-11
  • D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
    Revised to D6563-11a
  • D6568 Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
    Reapproved, available as D6568-00(2011)
  • D6596 Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
    Reapproved, available as D6596-00(2011)
  • D6605 Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
    Reapproved, available as D6605-06(2011)
  • D6631 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
    Reapproved, available as D6631-05(2011)
  • D6688 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
    Revised (with title change) to D6688-11
  • D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
    Reapproved, available as D6689-01(2011)
  • D6705/D6705M Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
    Reapproved (with editorial change), available as D6705/D6705M-04(2011)e1
  • D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
    Revised to D6709-11
  • D6730 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
    Reapproved, available as D6730-01(2011)
  • D6731 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
    Reapproved, available as D6731-01(2011)
  • D6733 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
    Reapproved, available as D6733-01(2011)
  • D6878/D6878M Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
    Revised to D6878/D6878M-11a
  • D6880/D6880M Standard Specification for Wood Boxes
    Revised (with designation change) to D6880/D6880M-11
  • D6889 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
    Reapproved, available as D6889-03(2011)
  • D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
    Revised to D6894-11
  • D6902 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
    Reapproved, available as D6902-04(2011)
  • D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
    Revised (with title change) to D6906-11a
  • D6945/D6945M Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
    Reapproved (with editorial change), available as D6945/D6945M-03(2011)e1
  • D6948/D6948M Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
    Reapproved (with editorial change), available as D6948/D6948M-03(2011)e1
  • D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
    Revised to D6984-11
  • D6990 Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
    Reapproved, available as D6990-05(2011)
  • D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
    Revised to D7031-11
  • D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
    Revised to D7046-11
  • D7053/D7053M Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
    Revised to D7053/D7053M-11
  • D7066 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
    Reapproved, available as D7066-04(2011)
  • D7125 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
    Revised to D7125-11
  • D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
    Revised to D7156-11
  • D7163 Standard Test Method for Specular Gloss of Printed Matter
    Revised to D7163-11
  • D7244 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
    Reapproved, available as D7244-06a(2011)
  • D7269/D7269M Standard Test Methods for Tensile Testing of Aramid Yarns
    Revised to D7269/D7269M-11
  • D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
    Reapproved, available as D7280-06(2011)
  • D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
    Revised to D7320-11
  • D7519-11 Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting
    New standard, now available.
  • D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
    Revised to D7589-11
  • D7616/D7616M-11 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
    New standard, now available.
  • D7617/D7617M-11 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
    New standard, now available.
  • D7640-11 Standard Specification for Engine Coolant Grade Glycerin
    New standard, now available.
  • D7663-11 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
    New standard, now available.
  • D7673 Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
    Editorially changed, available as D7673-10e1
  • D7718-11 Standard Practice for Obtaining In-Service Samples of Lubricating Grease
    New standard, now available.
  • D7719-11 Standard Specification for High Octane Unleaded Test Fuel
    New standard, now available.
  • D7726-11 Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
    New standard, now available.
  • E3 Standard Guide for Preparation of Metallographic Specimens
    Revised to E3-11
  • E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
    Revised to E88-11
  • E119 Standard Test Methods for Fire Tests of Building Construction and Materials
    Revised to E119-11
  • E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
    Revised to E162-11
  • E253 Standard Terminology Relating to Sensory Evaluation of Materials and Products
    Revised to E253-11
  • E312 Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)
    Reapproved, available as E312-06(2011)
  • E396 Standard Test Methods for Chemical Analysis of Cadmium
    Reapproved, available as E396-05(2011)
  • E455 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
    Revised to E455-11
  • E529 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
    Reapproved, available as E529-04(2011)
  • E563 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
    Revised to E563-11
  • E575 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
    Reapproved, available as E575-05(2011)
  • E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
    Revised to E580/E580M-11a
  • E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    Reapproved, available as E605-93(2011)
  • E620 Standard Practice for Reporting Opinions of Scientific or Technical Experts
    Revised to E620-11
  • E639-78(2002) Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
    Withdrawn with no replacement.
  • E644 Standard Test Methods for Testing Industrial Resistance Thermometers
    Revised to E644-11
  • E736 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
    Reapproved, available as E736-00(2011)
  • E859 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
    Reapproved, available as E859-93(2011)
  • E883 Standard Guide for Reflected–Light Photomicrography
    Revised to E883-11
  • E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
    Reapproved, available as E937-93(2011)
  • E991 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
    Revised to E991-11
  • E1083 Standard Test Method for Sensory Evaluation of Red Pepper Heat
    Reapproved, available as E1083-00(2011)
  • E1140 Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
    Editorially changed, available as E1140-95(2010)e1
  • E1163 Standard Test Method for Estimating Acute Oral Toxicity in Rats
    Revised to E1163-10
  • E1256 Standard Test Methods for Radiation Thermometers (Single Waveband Type)
    Revised to E1256-11a
  • E1395 Standard Test Method for Sensory Evaluation of Low Heat Chilies
    Reapproved, available as E1395-90(2011)
  • E1396 Standard Test Method for Sensory Evaluation of Oleoresin Capsicum
    Reapproved, available as E1396-90(2011)
  • E1513 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
    Reapproved, available as E1513-93(2011)
  • E1705 Standard Terminology Relating to Biotechnology
    Reinstated as E1705-11
  • E1710 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
    Revised to E1710-11
  • E1731 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
    Revised to E1731-11
  • E1765 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
    Revised to E1765-11
  • E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
    Reapproved, available as E1792-03(2011)
  • E1796 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
    Editorially changed, available as E1796-03(2011)e1
  • E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
    Revised to E1921-11
  • E1968 Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine
    Revised to E1968-11
  • E1969 Standard Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine
    Revised to E1969-11
  • E2022 Standard Practice for Calculation of Weighting Factors for Tristimulus Integration
    Revised to E2022-11
  • E2102 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
    Revised to E2102-11
  • E2125 Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues
    Revised to E2125-11
  • E2177 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
    Revised to E2177-11
  • E2273 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
    Reapproved, available as E2273-03(2011)
  • E2306 Standard Practice for Disposal of Personal Property
    Revised (with title change) to E2306-11
  • E2466 Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology
    Reapproved, available as E2466-06(2011)
  • E2473 Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record
    Reapproved, available as E2473-05(2011)
  • E2501 Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
    Revised to E2501-11
  • E2506 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
    Revised to E2506-11
  • E2538 Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures
    Reapproved, available as E2538-06(2011)
  • E2629-11 Standard Guide for Verification of Process Analytical Technology (PAT) Enabled Control Systems
    New standard, now available.
  • E2710 Standard Guide for Preservation of Charred Documents
    Editorially changed, available as E2710-11e1
  • E2711-11 Standard Guide for Preservation of Liquid Soaked Documents
    New standard, now available.
  • E2748 Standard Guide for Fire-Resistance Experiments
    Revised to E2748-11
  • E2750-11 Standard Guide for Extension of Data For Penetrations Seals
    New standard, now available.
  • E2808-11 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis
    New standard, now available.
  • F104 Standard Classification System for Nonmetallic Gasket Materials
    Revised to F104-11
  • F316 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
    Reapproved, available as F316-03(2011)
  • F381 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
    Revised to F381-11
  • F392/F392M Standard Test Method for Flex Durability of Flexible Barrier Materials
    Revised (with title change) to F392/F392M-11
  • F436 Standard Specification for Hardened Steel Washers
    Revised to F436-11
  • F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
    Revised to F606-11
  • F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
    Revised to F606M-11
  • F608 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
    Revised to F608-11
  • F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
    Revised to F668-11
  • F799 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
    Revised to F799-11
  • F905 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
    Reapproved, available as F905-04(2011)
  • F967 Standard Practice for Security Engineering Symbols
    Reapproved, available as F967-03(2011)
  • F969 Standard Practice for Construction of Chain-Link Tennis Court Fence
    Revised to F969-11
  • F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
    Revised to F1043-11a
  • F1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
    Revised (with title change) to F1055-11
  • F1163 Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
    Reapproved, available as F1163-04a(2011)
  • F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
    Reapproved, available as F1183-96(2011)
  • F1247 Standard Specification for Intrusion Resistant Generic Vault Structures
    Reapproved, available as F1247-89(2011)
  • F1313 Standard Specification for Volatile N-Nitrosamine Levels in Rubber Nipples on Pacifiers
    Reapproved, available as F1313-90(2011)
  • F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
    Revised to F1469-11
  • F1549 Standard Terminology Relating to Underwater Search, Rescue, and Recovery Activities
    Reapproved, available as F1549-94(2011)
  • F1553 Standard Guide for Specifying Chain Link Fence
    Revised to F1553-11
  • F1712 Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications
    Revised to F1712-11
  • F1742 Standard Specification for PVC Insulating Sheeting
    Reapproved, available as F1742-03(2011)
  • F1789 Standard Terminology for F16 Mechanical Fasteners
    Revised to F1789-11
  • F1871 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
    Reinstated as F1871-11
  • F1957 Standard Test Method for Composite Foam Hardness-Durometer Hardness
    Reapproved, available as F1957-99(2011)
  • F1960 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
    Revised to F1960-11
  • F1962 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
    Revised to F1962-11
  • F2245 Standard Specification for Design and Performance of a Light Sport Airplane
    Revised to F2245-11
  • F2272 Standard Specification for Paintball Markers
    Revised to F2272-11
  • F2273 Standard Test Methods for Bicycle Forks
    Revised to F2273-11
  • F2274 Standard Specification for Condition 3 Bicycle Forks
    Revised to F2274-11
  • F2280 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
    Revised to F2280-11
  • F2320 Standard Specification for Rubber Insulating Sheeting
    Revised to F2320-11
  • F2328 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
    Reapproved, available as F2328-05(2011)
  • F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
    Reapproved, available as F2329-05(2011)
  • F2420 Standard Test Method for Determining Relative Humidity on the Surface of Concrete Floor Slabs Using Relative Humidity Probe Measurement and Insulated Hood
    Reapproved, available as F2420-05(2011)
  • F2553 Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
    Revised to F2553-11
  • F2653 Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
    Revised to F2653-11
  • F2732 Standard Practice for Determining the Temperature Ratings for Cold Weather Protective Clothing
    Revised to F2732-11
  • F2764 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    Revised to F2764-11a
  • F2766-11 Standard Test Method for Boat Barriers
    New standard, now available.
  • F2788 Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe
    Revised (with title change) to F2788-11
  • F2830-11 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
    New standard, now available.
  • F2831-11 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
    New standard, now available.
  • F2880-11 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes ¾ in. to 65 in.
    New standard, now available.
  • G181 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
    Revised (with title change) to G181-11
  • G206-11 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
    New standard, now available.
  • SI10 IEEE/ASTM SI 10 American National Standard for Metric Practice
    Revised to SI10-10

Published in international.