ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
    Revised to A182/A182M-11
  • A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
    Reapproved (with editorial change), available as A230/A230M-05(2011)e1
  • A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
    Reapproved (with editorial change), available as A232/A232M-05(2011)e1
  • A453/A453M Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
    Editorially changed, available as A453/A453M-10e1
  • A802/A802M Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
    Editorially changed, available as A802/A802M-95(2010)e1
  • A914/A914M Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
    Reapproved, available as A914/A914M-92(2011)
  • A921/A921M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
    Reapproved, available as A921/A921M-93(2011)
  • A940/A940M Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
    Reapproved, available as A940/A940M-06(2011)
  • A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
    Revised to A959-11
  • A983/A983M Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
    Reapproved, available as A983/A983M-06(2011)
  • A986/A986M Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
    Reapproved, available as A986/A986M-01(2011)
  • B69 Standard Specification for Rolled Zinc
    Revised to B69-11
  • B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
    Revised to B86-11
  • B177/B177M Standard Guide for Engineering Chromium Electroplating
    Revised (with designation change) to B177/B177M-11
  • B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    Revised to B209-10
  • B370 Standard Specification for Copper Sheet and Strip for Building Construction
    Revised to B370-11
  • B846 Standard Terminology for Copper and Copper Alloys
    Revised to B846-11a
  • B917/B917M Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
    Revised to B917/B917M-11
  • B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes
    Revised (with designation change) to B969/B969M-11
  • C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
    Revised to C32-11
  • C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
    Revised (with designation change) to C40/C40M-11
  • C55 Standard Specification for Concrete Building Brick
    Revised to C55-11
  • C90 Standard Specification for Loadbearing Concrete Masonry Units
    Revised to C90-11a
  • C94/C94M Standard Specification for Ready-Mixed Concrete
    Revised to C94/C94M-11a
  • C119 Standard Terminology Relating to Dimension Stone
    Revised to C119-11
  • C125 Standard Terminology Relating to Concrete and Concrete Aggregates
    Revised to C125-11
  • C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
    Revised to C126-11
  • C129 Standard Specification for Nonloadbearing Concrete Masonry Units
    Revised to C129-11
  • C144 Standard Specification for Aggregate for Masonry Mortar
    Revised to C144-11
  • C156 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
    Revised to C156-11
  • C207 Standard Specification for Hydrated Lime for Masonry Purposes
    Reapproved, available as C207-06(2011)
  • C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
    Editorially changed, available as C266-08e1
  • C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
    Revised to C309-11
  • C311 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
    Revised to C311-11a
  • C404 Standard Specification for Aggregates for Masonry Grout
    Revised to C404-11
  • C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
    Revised to C564-11
  • C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
    Reapproved, available as C593-06(2011)
  • C645 Standard Specification for Nonstructural Steel Framing Members
    Revised to C645-11
  • C757 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
    Reapproved (with editorial change), available as C757-06(2011)e1
  • C761 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
    Revised to C761-11
  • C776 Standard Specification for Sintered Uranium Dioxide Pellets
    Reapproved, available as C776-06(2011)
  • C787 Standard Specification for Uranium Hexafluoride for Enrichment
    Revised to C787-11
  • C830 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
    Reapproved, available as C830-00(2011)
  • C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
    Revised to C836/C836M-11a
  • C889 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
    Revised to C889-11
  • C911 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
    Reapproved, available as C911-06(2011)
  • C926 Standard Specification for Application of Portland Cement-Based Plaster
    Revised to C926-11
  • C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
    Revised to C955-11
  • C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
    Revised to C1007-11
  • C1068 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
    Reapproved, available as C1068-03(2011)
  • C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method
    Revised to C1074-11
  • C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
    Revised to C1088-11
  • C1118-07 Standard Guide for Selecting Components for Wavelength-Dispersive X-Ray Fluorescence (XRF) Systems (Withdrawn 2011)
    Withdrawn with no replacement.
  • C1156 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
    Reapproved, available as C1156-03(2011)
  • C1167 Standard Specification for Clay Roof Tiles
    Revised to C1167-11
  • C1188 Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities
    Reapproved, available as C1188-04(2011)
  • C1189 Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
    Reinstated, with revision to C1189-11
  • C1195 Standard Test Method for Absorption of Architectural Cast Stone
    Reapproved, available as C1195-03(2011)
  • C1255 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
    Revised to C1255-11
  • C1267 Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
    Revised to C1267-11
  • C1297 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
    Reapproved, available as C1297-03(2011)
  • C1310-01(2007) Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration (Withdrawn 2011)
    Withdrawn with no replacement.
  • C1314 Standard Test Method for Compressive Strength of Masonry Prisms
    Revised to C1314-11
  • C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
    Revised to C1315-11
  • C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
    Revised to C1363-11
  • C1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units
    Revised to C1372-11
  • C1380 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry
    Reapproved, available as C1380-04(2011)
  • C1396/C1396M Standard Specification for Gypsum Board
    Revised to C1396/C1396M-11
  • C1413 Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
    Reapproved, available as C1413-05(2011)
  • C1430 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
    Reapproved (with editorial change), available as C1430-07(2011)e1
  • C1438 Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
    Revised to C1438-11
  • C1453 Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
    Reapproved, available as C1453-00(2011)
  • C1474 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
    Reapproved, available as C1474-00(2011)
  • C1476-06 Standard Test Method for Analysis of Urine for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry (Withdrawn 2011)
    Withdrawn with no replacement.
  • C1508 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
    Reapproved, available as C1508-01(2011)
  • C1529 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
    Reapproved, available as C1529-06a(2011)
  • C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
    Revised to C1540-11
  • C1629/C1629M Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
    Reapproved, available as C1629/C1629M-06(2011)
  • C1634 Standard Specification for Concrete Facing Brick
    Revised to C1634-11
  • C1655 Standard Classification of Fireclay and High-Alumina Mortars
    Reapproved, available as C1655-06(2011)
  • C1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
    Revised to C1677-11
  • C1716/C1716M Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
    Revised to C1716/C1716M-11
  • C1751-11 Standard Guide for Sampling Radioactive Tank Waste
    New standard, now available.
  • D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications
    Revised to D16-11a
  • D97 Standard Test Method for Pour Point of Petroleum Products
    Revised to D97-11
  • D344 Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
    Revised to D344-11
  • D841 Standard Specification for Nitration Grade Toluene
    Revised to D841-11
  • D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
    Revised to D850-11
  • D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    Revised to D974-11
  • D1018 Standard Test Method for Hydrogen In Petroleum Fractions
    Revised to D1018-11
  • D1048 Standard Specification for Rubber Insulating Blankets
    Revised to D1048-11
  • D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives
    Revised to D1091-11
  • D1120 Standard Test Method for Boiling Point of Engine Coolants
    Editorially changed, available as D1120-11e1
  • D1187/D1187M Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
    Reapproved (with editorial change), available as D1187/D1187M-97(2011)e1
  • D1655 Standard Specification for Aviation Turbine Fuels
    Revised to D1655-11
  • D1670 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
    Reapproved (with editorial change), available as D1670-04(2011)e1
  • D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels
    Revised to D1839-11
  • D1970/D1970M Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
    Revised (with designation change) to D1970/D1970M-11
  • D1981 Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
    Revised to D1981-11
  • D2137 Standard Test Methods for Rubber PropertyBrittleness Point of Flexible Polymers and Coated Fabrics
    Revised to D2137-11
  • D2201 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
    Reapproved, available as D2201-99(2011)
  • D2363 Standard Test Methods for Hydroxypropyl Methylcellulose
    Reapproved, available as D2363-79(2011)
  • D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
    Revised (with designation change) to D2435/D2435M-11
  • D2500 Standard Test Method for Cloud Point of Petroleum Products
    Revised to D2500-11
  • D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
    Reapproved, available as D2628-91(2011)
  • D2797/D2797M Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
    Revised to D2797/D2797M-11a
  • D2798 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
    Revised to D2798-11a
  • D2805 Standard Test Method for Hiding Power of Paints by Reflectometry
    Revised to D2805-11
  • D2866 Standard Test Method for Total Ash Content of Activated Carbon
    Revised to D2866-11
  • D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
    Revised to D2896-11
  • D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
    Revised to D3018/D3018M-11
  • D3168 Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
    Reapproved, available as D3168-85(2011)
  • D3184 Standard Practice for RubberEvaluation of NR (Natural Rubber)
    Revised (with title change) to D3184-11
  • D3242 Standard Test Method for Acidity in Aviation Turbine Fuel
    Revised to D3242-11
  • D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
    Revised to D3246-11
  • D3319 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
    Revised to D3319-11
  • D3339 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
    Revised to D3339-11
  • D3455 Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
    Reinstated, with revision to D3455-11
  • D3485-02 Standard Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable (Withdrawn 2011)
    Withdrawn with no replacement.
  • D3885 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
    Reapproved, available as D3885-07a(2011)
  • D3886 Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
    Reapproved (with editorial change), available as D3886-99(2011)e1
  • D4046 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
    Revised to D4046-11
  • D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
    Revised to D4434/D4434M-11
  • D4482 Test Method for Rubber PropertyExtension Cycling Fatigue
    Revised to D4482-11
  • D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)
    Revised to D4530-11
  • D4685 Standard Test Method for Pile Fabric Abrasion
    Reapproved (with editorial change), available as D4685-07(2011)e1
  • D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    Revised to D4739-11
  • D4851 Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
    Reapproved, available as D4851-07(2011)
  • D4869 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
    Reapproved (with editorial change), available as D4869-05(2011)e1
  • D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
    Reapproved, available as D4885-01(2011)
  • D4887/D4887M Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
    Revised (with designation change) to D4887/D4887M-11
  • D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
    Revised to D5004-11
  • D5078/D5078M Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
    Revised (with designation change) to D5078/D5078M-11
  • D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
    Revised to D5304-11
  • D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
    Reapproved, available as D5323-92(2011)
  • D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
    Revised to D5384-11
  • D5430 Standard Test Methods for Visually Inspecting and Grading Fabrics
    Reapproved, available as D5430-07(2011)
  • D5454 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
    Revised and editorially changed, available as D5454-11e1
  • D5493 Standard Test Method for Permittivity of Geotextiles Under Load
    Reapproved, available as D5493-06(2011)
  • D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
    Reapproved, available as D5494-93(2011)
  • D5514 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
    Reapproved, available as D5514-06(2011)
  • D5548 Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
    Editorially changed, available as D5548-05e2
  • D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
    Reapproved, available as D5567-94(2011)
  • D5641 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
    Reapproved, available as D5641-94(2011)
  • D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
    Revised to D5708-11
  • D5770 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    Revised to D5770-11
  • D5820 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
    Reapproved, available as D5820-95(2011)
  • D5853 Standard Test Method for Pour Point of Crude Oils
    Revised to D5853-11
  • D5886 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
    Reapproved, available as D5886-95(2011)
  • D5888 Standard Guide for Storage and Handling of Geosynthetic Clay Liners
    Reapproved, available as D5888-06(2011)
  • D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
    Revised to D5984-11
  • D6088 Standard Practice for Installation of Geocomposite Pavement Drains
    Reapproved, available as D6088-06(2011)
  • D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
    Reapproved (with editorial change), available as D6152/D6152M-99(2011)e1
  • D6207 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
    Reapproved, available as D6207-03(2011)
  • D6249 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
    Reapproved, available as D6249-06(2011)
  • D6365 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
    Reapproved, available as D6365-99(2011)
  • D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
    Revised to D6432-11
  • D6439 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
    Revised to D6439-11
  • D6454 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
    Reapproved, available as D6454-99(2011)
  • D6493 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
    Revised (with title change) to D6493-11
  • D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds
    Reapproved (with editorial change), available as D6511/D6511M-06(2006)e1
  • D6524 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
    Reapproved, available as D6524-00(2011)
  • D6574 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
    Reapproved, available as D6574-00(2011)
  • D6579 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
    Revised (with title change) to D6579-11
  • D6612 Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
    Reapproved, available as D6612-00(2011)
  • D6614 Standard Test Method for Stretch Properties of Textile Fabrics - CRE Method
    Reapproved, available as D6614-07(2011)
  • D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
    Reapproved, available as D6636-01(2011)
  • D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
    Reapproved, available as D6707-06(2011)
  • D6722 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
    Revised to D6722-11
  • D6745 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
    Revised to D6745-11
  • D6770 Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
    Reapproved, available as D6770-07(2011)
  • D6775 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
    Reapproved, available as D6775-02(2011)
  • D6776-02 Standard Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment (Withdrawn 2011)
    Withdrawn with no replacement.
  • D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
    Revised to D6791-11
  • D6797 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
    Reapproved, available as D6797-07(2011)
  • D6828 Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
    Reapproved, available as D6828-02(2011)
  • D6848-02 Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing (Withdrawn 2011)
    Withdrawn with no replacement.
  • D6917 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
    Reapproved, available as D6917-03(2011)
  • D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
    Reapproved, available as D7001-06(2011)
  • D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    Revised to D7111-11
  • D7124 Standard Specification for Benzene for Use with Zeolite Based Catalysts
    Revised to D7124-11
  • D7169 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
    Revised to D7169-11
  • D7174 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
    Reapproved, available as D7174-05(2011)
  • D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
    Reapproved, available as D7176-06(2011)
  • D7178 Standard Practice for Determining the Number of Constrictions "m" of Non-Woven Geotextiles as a Complementary Filtration Property
    Reapproved, available as D7178-06(2011)
  • D7213 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
    Revised to D7213-11
  • D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
    Reapproved, available as D7239-06(2011)
  • D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
    Reapproved, available as D7240-06(2011)
  • D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
    Reapproved, available as D7272-06(2011)
  • D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
    Reapproved, available as D7274-06a(2011)
  • D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
    Revised to D7566-11
  • D7588-11 Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
    New standard, now available.
  • D7607-11 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
    New standard, now available.
  • D7636/D7636M-11 Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
    New standard, now available.
  • D7672-11 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
    New standard, now available.
  • D7713-11 Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)
    New standard, now available.
  • D7722-11 Standard Terminology Relating to Industrial Textile Stitches and Seams
    New standard, now available.
  • D7723-11 Standard Test Method for Rubber PropertyMacro-Dispersion of Fillers in Compounds
    New standard, now available.
  • D7727-11 Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
    New standard, now available.
  • D7731-11 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
    New standard, now available.
  • E45 Standard Test Methods for Determining the Inclusion Content of Steel
    Revised to E45-11
  • E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
    Revised (with title change) to E60-11
  • E84 Standard Test Method for Surface Burning Characteristics of Building Materials
    Revised to E84-11a
  • E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials (Withdrawn 2011)
    Withdrawn with no replacement.
  • E215 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube
    Revised (with title change) to E215-11
  • E228 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
    Revised to E228-11
  • E266 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
    Revised to E266-11
  • E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
    Revised to E329-11a
  • E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
    Revised (with title change) to E376-11
  • E430 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
    Revised to E430-11
  • E432 Standard Guide for Selection of a Leak Testing Method
    Reapproved, available as E432-91(2011)
  • E473 Standard Terminology Relating to Thermal Analysis and Rheology
    Revised to E473-11a
  • E473 Standard Terminology Relating to Thermal Analysis and Rheology
    Revised to E473-11
  • E482 Standard Test Method for Ash from Petroleum Products
    Revised to E482-11
  • E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements
    Revised (with designation change) to E488/E488M-10
  • E493/E493M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
    Revised (with title change) to E493/E493M-11
  • E498/E498M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
    Revised (with title change) to E498/E498M-11
  • E499/E499M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
    Revised (with title change) to E499/E499M-11
  • E515 Standard Practice for Leaks Using Bubble Emission Techniques
    Revised (with title change) to E515-11
  • E523 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
    Revised to E523-11
  • E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
    Revised to E539-11
  • E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates
    Revised to E647-11
  • E720 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
    Revised to E720-11
  • E759 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
    Reapproved, available as E759-92(2011)
  • E866 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
    Revised to E866-11
  • E942 Standard Guide for Simulation of Helium Effects in Irradiated Metals
    Reapproved, available as E942-96(2011)
  • E1002 Standard Practice for Leaks Using Ultrasonics
    Revised (with title change) to E1002-11
  • E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
    Revised to E1019-11
  • E1052-96(2002) Standard Test Method for Efficacy of Antimicrobial Agents Against Viruses in Suspension (Withdrawn 2011)
    Withdrawn with no replacement.
  • E1067/E1067M Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
    Revised (with designation change) to E1067/E1067M-11
  • E1112 Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
    Reapproved, available as E1112-00(2011)
  • E1114 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
    Editorially changed, available as E1114-09e1
  • E1142 Standard Terminology Relating to Thermophysical Properties
    Revised to E1142-11a
  • E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
    Revised (with title change) to E1251-11
  • E1316 Standard Terminology for Nondestructive Examinations
    Revised to E1316-11a
  • E1441 Standard Guide for Computed Tomography (CT) Imaging
    Revised to E1441-11
  • E1492 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
    Revised to E1492-11
  • E1545 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
    Revised to E1545-11
  • E1570 Standard Practice for Computed Tomographic (CT) Examination
    Revised to E1570-11
  • E1577 Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis
    Revised to E1577-11
  • E1603/E1603M Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
    Revised (with title change) to E1603/E1603M-11
  • E1618 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
    Revised to E1618-11
  • E1638 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
    Revised to E1638-11
  • E1826 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
    Revised to E1826-11
  • E1961 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
    Revised to E1961-11
  • E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
    Revised to E1999-11
  • E2024/E2024M Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
    Revised (with title change) to E2024/E2024M-11
  • E2065 Standard Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners
    Revised (with title change) to E2065-11
  • E2126 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
    Revised to E2126-11
  • E2137 Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters
    Reapproved, available as E2137-06(2011)
  • E2173 Standard Guide for Disclosure of Environmental Liabilities
    Reapproved, available as E2173-07(2011)
  • E2238-02 Standard Guide for Evacuation Route Diagrams (Withdrawn 2011)
    Withdrawn with no replacement.
  • E2259 Standard Guide for Archiving and Retrieving ITS-Generated Data
    Reapproved, available as E2259-03a(2011)
  • E2347 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
    Revised to E2347-11
  • E2387 Standard Practice for Goniometric Optical Scatter Measurements
    Reapproved, available as E2387-05(2011)
  • E2425 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
    Revised to E2425-11
  • E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength-Dispersive X-Ray Fluorescence Spectrometry
    Revised (with title change) to E2465-11
  • E2479 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
    Revised to E2479-11
  • E2544 Standard Terminology for Three-Dimensional (3D) Imaging Systems
    Revised to E2544-11a
  • E2593 Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
    Revised and editorially changed, available as E2593-11e1
  • E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
    Revised to E2634-11
  • E2764-11 Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis
    New standard, now available.
  • E2775-11 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
    New standard, now available.
  • E2790-11 Standard Guide for Identifying and Complying With Continuing Obligations
    New standard, now available.
  • E2793 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
    Editorially changed, available as E2793-10e1
  • E2812-11 Standard Practice for Uniform Data Management in Asset Management Records Systems
    New standard, now available.
  • E2814-11 Standard Guide for Industrial Woven Wire Filter Cloth
    New standard, now available.
  • E2816-11 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
    New standard, now available.
  • E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
    New standard, now available.
  • E2820-11 Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
    New standard, now available.
  • E2823-11 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)
    New standard, now available.
  • E2824-11 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
    New standard, now available.
  • E2835-11 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device
    New standard, now available.
  • F7 Standard Specification for Aluminum Oxide Powder
    Reapproved, available as F7-95(2011)
  • F19 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
    Revised to F19-11
  • F44 Standard Specification for Metallized Surfaces on Ceramic
    Reapproved, available as F44-95(2011)
  • F384 Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
    Reapproved, available as F384-06(2011)
  • F390 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
    Revised to F390-11
  • F406 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
    Revised to F406-11
  • F448 Test Method for Measuring Steady-State Primary Photocurrent
    Revised to F448-11
  • F471-76(2002) Standard Terminology Relating to Combination Locks (Withdrawn 2011)
    Withdrawn with no replacement.
  • F476-84(2002) Standard Test Methods for Security of Swinging Door Assemblies (Withdrawn 2011)
    Withdrawn with no replacement.
  • F528-99(2005) Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors (Withdrawn 2011)
    Withdrawn with no replacement.
  • F710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
    Revised to F710-11
  • F732 Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
    Reapproved, available as F732-00(2011)
  • F770 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
    Revised (with title change) to F770-11
  • F833 Standard Consumer Safety Performance Specification for Carriages and Strollers
    Revised to F833-11
  • F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
    Revised to F835M-11
  • F862-93(2002) Standard Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids (Withdrawn 2011)
    Withdrawn with no replacement.
  • F882-84(2002) Standard Performance and Safety Specification for Cryosurgical Medical Instruments (Withdrawn 2011)
    Withdrawn with no replacement.
  • F921 Standard Terminology Relating to Hemostatic Forceps
    Reapproved, available as F921-10(2011)
  • F1078 Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
    Reapproved, available as F1078-10(2011)
  • F1154 Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components+
    Revised to F1154-11
  • F1238 Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications
    Reapproved, available as F1238-95(2011)
  • F1263 Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
    Revised to F1263-11
  • F1367 Standard Specification for Chromium Sputtering Targets for Thin Film Applications
    Reapproved, available as F1367-98(2011)
  • F1383 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
    Revised to F1383-11
  • F1407 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
    Revised to F1407-11
  • F1512 Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies
    Reapproved, available as F1512-94(2011)
  • F1513 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
    Reapproved, available as F1513-99(2011)
  • F1594 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
    Reapproved, available as F1594-95(2011)
  • F1684 Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
    Reapproved, available as F1684-06(2011)
  • F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
    Revised to F1717-11a
  • F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
    Revised to F1717-11
  • F1761 Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets
    Reapproved, available as F1761-00(2011)
  • F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    Editorially changed, available as F1807-11ae1
  • F1874 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
    Reapproved, available as F1874-98(2011)
  • F1894 Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness
    Reapproved, available as F1894-98(2011)
  • F1920 Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines
    Revised to F1920-11
  • F1932 Standard Test Method for Measuring Sleeping Bag Loft
    Reapproved, available as F1932-98(2011)
  • F1933 Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
    Reapproved, available as F1933-98(2011)
  • F1934 Standard Test Method for Weighing a Backpacking or Mountaineering Tent
    Reapproved, available as F1934-98(2011)
  • F1935 Standard Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
    Reapproved, available as F1935-01(2011)
  • F1960 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
    Editorially changed, available as F1960-11e1
  • F2062 Standard Specification for Square Drive Interconnections on Surgical Instruments
    Reapproved, available as F2062-00(2011)
  • F2093 Standard Test Method for Performance of Rack Ovens
    Revised to F2093-11
  • F2113 Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications
    Reapproved, available as F2113-01(2011)
  • F2137 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
    Revised to F2137-11
  • F2140 Standard Test Method for Performance of Hot Food Holding Cabinets
    Revised to F2140-11
  • F2269 Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
    Revised to F2269-11
  • F2291 Standard Practice for Design of Amusement Rides and Devices
    Revised to F2291-11
  • F2337 Standard Test Method for Treestand Fall Arrest System
    Revised to F2337-11
  • F2405 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
    Reapproved, available as F2405-04(2011)
  • F2419 Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
    Revised to F2419-11
  • F2502 Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants
    Revised to F2502-11
  • F2537 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
    Reapproved, available as F2537-06(2011)
  • F2730/F2730M Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
    Revised to F2730/F2730M-11
  • F2731 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
    Revised to F2731-11
  • F2756 Standard Test Method for Determining Energy Consumption of Vacuum Cleaners
    Revised to F2756-11
  • F2801 Standard Practice for Paintball Player Safety Briefing
    Revised to F2801-11
  • F2839-11 Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
    New standard, now available.
  • F2853 Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
    Editorially changed, available as F2853-10e1
  • F2894-11 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
    New standard, now available.
  • F2915-11 Standard Specification for Additive Manufacturing File Format (AMF)
    New standard, now available.

Published in international.