IEC PUBLICATIONS

You can now purchase PDFs of IEC Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. IEC Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel.

  • IEC 60079-0:2011 (Edition 6) Explosive atmospheres. Equipment. General requirements
  • IEC 60079-11:2011 (Edition 6) Explosive atmospheres. Equipment protection by intrinsic safety “i”
  • IEC 60191-6-12:2011 (Edition 2) Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guidelines for fine-pitch land grid array (FLGA)
  • IEC 60312-1:2010 Vacuum cleaners for household use. Dry vacuum cleaners. Methods for measuring the performance
    AMENDMENT 1:June 2011
  • IEC 60512-9-3:2011 (Edition 2) Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9c. Mechanical operation (engaging and separating) with electrical load
  • IEC 60601-2-54:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
    CORRIGENDUM 1:March 2010
    CORRIGENDUM 2:June 2011
  • IEC 60684-3-247:2011 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 247. Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
  • IEC 60684-3-271:2011 (Edition 3) Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 271. Heatshrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
  • IEC 60749-7:2011 (Edition 2) Semiconductor devices. Mechanical and climatic test methods. Internal moisture content measurement and the analysis of other residual gases
  • IEC 60851-5:2004 Winding wires. Test methods. Electrical properties
    AMENDMENT 1:June 2011
  • IEC 61076-2-001:2011 (Edition 2) Connectors for electronic equipment. Product requirements. Circular connectors. Blank detail specification
  • IEC 61076-2-106:2011 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for connectors M 16 × 0,75 with screw-locking and degree of protection IP40 or IP65/67
  • IEC 61076-2:2011 (Edition 2) Connectors for electronic equipment. Product requirements. Sectional specification for circular connectors
  • IEC 61162-450:2011 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ethernet interconnection
  • IEC 61204-3:2011 (Edition 2) Low-voltage power supplies, D.C. output. Electromagnetic compatibility (EMC)
  • IEC 61300-2-12:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Impact
    CORRIGENDUM 1:June 2011
  • IEC 61300-3-46:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Measurement. Bore diameter for guide pin in MT ferrules
  • IEC 61709:2011 (Edition 2) Electric components. Reliability. Reference conditions for failure rates and stress models for conversion. Reference conditions for failure rates and stress models for conversion
  • IEC 61747-5-2:2011 Liquid crystal display devices. Environmental, endurance and mechanical test methods. Visual inspection of active matrix colour liquid crystal display modules
  • IEC 61747-6-2:2011 Liquid crystal display devices. Measuring methods for liquid crystal display modules. Reflective type
  • IEC 61850-8-1:2011 (Edition 2) Communication networks and systems for power utility automation. Specific communication service mapping (SCSM). Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
  • IEC 61960:2011 (Edition 2) Secondary cells and batteries containing alkaline or other non-acid electrolytes. Secondary lithium cells and batteries for portable applications
  • IEC/TS 61994-2:2011 (Edition 2) Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary. Piezoelectric and dielectric filters
  • IEC 62047-7:2011 Semiconductor devices. Micro-electromechanical devices. MEMS BAW filter and duplexer for radio frequency control and selection
  • IEC 62109-2:2011 Safety of power converters for use in photovoltaic power systems. Particular requirements for inverters
  • IEC 62232:2011 Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
  • IEC 62271-1:2007 High-voltage switchgear and controlgear. Common specifications
    AMENDMENT 1:June 2011
  • IEC 62271-103:2011 High-voltage switchgear and controlgear. Switches for rated voltages above 1 kV up to and including 52 kV
  • IEC 62290-2:2011 Railway applications. Urban guided transport management and command/control systems. Functional requirements specification
  • IEC/TR 62368-2:2011 Audio/video, information and communication technology equipment. Explanatory information related to IEC 62368-1
  • IEC 62386-209:2011 Digital addressable lighting interface. Particular requirements for control gear. Colour control (device type 8)
  • IEC 62561-5:2011 Lightning protection system components (LPSC). Requirements for earth electrode inspection housings and earth electrode seals
  • IEC 62561-6:2011 Lightning protection system components (LPSC). Requirements for lightning strike counters (LSC)
  • IEC 62613-1:2011 Plugs, socket-outlets and ship couplers for high voltage shore connection systems (HVSC systems). General requirements
  • IEC 62621:2011 Railway applications. Fixed installations. Electric traction. Specific requirements for composite insulators used for overhead contact line systems
  • IEC CISPR 16-4-2:2011 (Edition 2) Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Measurement instrumentation uncertainty
  • IEC CISPR 17:2011 (Edition 2) Methods of measurement of the suppression characteristics of passive EMC filtering devices
  • IEC CISPR 24:2010 Information technology equipment. Immunity characteristics. Limits and methods of measurement
    CORRIGENDUM 1:June 2011

IEC/PAS PUBLICATIONS

  • IEC/PAS 62647-1:2011 Process management for avionics. Aerospace and defence electronic systems containing lead-free solder. Lead-free management
  • IEC/PAS 62647-2:2011 Process management for avionics. Aerospace and defence electronic systems containing lead-free solder. Mitigation of the deleterious effects of tin
  • IEC/PAS 62722-1:2011 Luminaire performance. General requirements
  • IEC/PAS 62722-2-1:2011 Luminaire performance. Particular requirements for LED luminaires

Published in international.