BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

BRITISH PUBLICATIONS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 2000-19:2011 Methods of test for petroleum and its products. Determination of demulsibility characteristics of lubricating oil
    Supersedes BS 2000-19:2003
  • BS 2000-48:2011 Methods of test for petroleum and its products. Determination of oxidation characteristics of lubricating oil
    Supersedes BS 2000-48:1997
  • BS 2000-306:2011 Methods of test for petroleum and its products. Determination of oxidation stability of straight mineral oil
    Supersedes BS 2000-306:1994
  • BS 2000-455:2011 Methods of test for petroleum and its products. Determination of the manganese content of gasoline. Atomic absorption spectrometry (AAS) method
    Supersedes BS 2000-455:2001
  • BS 6896:2011 Specification for installation and maintenance of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)
    Supersedes BS 6896:2005
  • BS 7671:2008+A1:2011 Requirements for electrical installations. IEE Wiring Regulations. Seventeenth edition
    Supersedes BS 7671:2008 which remains current
  • BS 8472:2011 Methods for the assessment of the oxobiodegradation of plastics and of the phytotoxicity of the residues in controlled laboratory conditions
  • BS 8523:2011 Management and operation of warden schemes. Code of practice
  • BS 8599-1:2011 Workplace first aid kits. Specification for the contents of workplace first aid kits
  • BS 31100:2011 Risk management. Code of practice and guidance for the implementation of BS ISO 31000
    Supersedes BS 31100:2008

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email mailto:enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 71-1:2011 Safety of toys. Mechanical and physical properties
    Supersedes BS EN 71-1:2005+A9:2009
  • BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
    Supersedes BS EN ISO 376:2004
  • BS EN 459-3:2011 Building lime. Conformity evaluation
    Supersedes BS EN 459-3:2001
  • BS EN 674:2011 Glass in building. Determination of thermal transmittance (U value). Guarded hot plate method
    Supersedes BS EN 674:1998
  • BS EN 675:2011 Glass in building. Determination of thermal transmittance (U value). Heat flow meter method
    Supersedes BS EN 675:1998
  • BS EN 998-2:2010 Specification for mortar for masonry. Masonry mortar
    Supersedes BS EN 998-2:2003
  • BS EN 1627:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Requirements and classification
    Supersedes DD ENV 1627:1999
  • BS EN 1628:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance under static loading
    Supersedes DD ENV 1628:1999
  • BS EN 1629:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance under dynamic loading
    Supersedes DD ENV 1629:1999
  • BS EN 1630:2011 Pedestrian doorsets, windows, curtain walling, grilles and shutters. Burglar resistance. Test method for the determination of resistance to manual burglary attempts
    Supersedes DD ENV 1630:1999
  • BS EN 1824:2011 Road marking materials. Road trials
    Supersedes BS EN 1824:1998
  • BS EN 1965-1:2011 Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate
    Supersedes BS EN 1965-1:2001
  • BS EN 2240-061:2011 Aerospace series. Lamps, incandescent. Lamp, code 1683. Product standard
  • BS EN 2240-062:2011 Aerospace series. Lamps, incandescent. Lamp, code 1810. Product standard
  • BS EN 2240-063:2011 Aerospace series. Lamps, incandescent. Lamp, code 1815. Product standard
  • BS EN 2240-064:2011 Aerospace series. Lamps, incandescent. Lamp, code 1819. Product standard
  • BS EN 2240-065:2011 Aerospace series. Lamps, incandescent. Lamp, code 1820. Product standard
  • BS EN ISO 3994:2011 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
    Supersedes BS EN ISO 3994:2001
  • BS EN ISO 5667-13:2011 Water quality. Sampling. Guidance on sampling of sludges
    Supersedes the dual numbered standard BS EN ISO 5667-13:1998, BS 6068-6.13:1998
  • BS EN ISO 8835-3:2009+A1:2010 Inhalational anaesthesia systems. Transfer and receiving systems of active anaesthetic gas scavenging systems
  • BS EN ISO 9493:2010 Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics
    Supersedes BS 2795:1981 which remains current and obsolescent
  • BS EN ISO 10360-7:2011 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs equipped with imaging probing systems
  • BS EN ISO 10414-2:2011 Petroleum and natural gas industries. Field testing of drilling fluids. Oil-based fluids
    Supersedes BS ISO 10414-2:2002
  • BS EN ISO 10773:2011 Clay geosynthetic barriers. Determination of permeability to gases
  • BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
  • BS EN ISO 11073-10407:2011 Health informatics. Personal health device communication. Device specialization. Blood pressure monitor
  • BS EN ISO 11960:2011 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
    Supersedes BS EN ISO 11960:2004
  • BS EN 12101-7:2011 Smoke and heat control systems. Smoke duct sections
  • BS EN 12101-8:2011 Smoke and heat control systems. Smoke control dampers
  • BS EN 12163:2011 Copper and copper alloys. Rod for general purposes
    Supersedes BS EN 12163:1998
  • BS EN 12164:2011 Copper and copper alloys. Rod for free machining purposes
    Supersedes BS EN 12164:1998
  • BS EN 12165:2011 Copper and copper alloys. Wrought and unwrought forging stock
    Supersedes BS EN 12165:1998
  • BS EN 12166:2011 Copper and copper alloys. Wire for general purposes
    Supersedes BS EN 12166:1998
  • BS EN 12167:2011 Copper and copper alloys. Profiles and bars for general purposes
    Supersedes BS EN 12167:1998
  • BS EN 12464-1:2011 Light and lighting. Lighting of work places. Indoor work places
    Supersedes BS EN 12464-1:2002
  • BS EN 12705:2011 Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration
    Supersedes BS EN 12705:2000
  • BS EN 12802:2011 Road marking materials. Laboratory methods for identification
    Supersedes BS EN 12802:2000
  • BS EN 13197:2011 Road marking materials. Wear simulator Turntable
    Supersedes BS EN 13197:2001
  • BS EN 13212:2011 Road marking materials. Requirements for factory production control
    Supersedes BS EN 13212:2001
  • BS EN 13459:2011 Road marking materials. Sampling from storage and testing
    Supersedes DD ENV 13459-1:1999
  • BS EN 13523-11:2011 Coil coated metals. Test methods. Resistance to solvents (rubbing test)
    Supersedes BS EN 13523-11:2004
  • BS EN 13523-19:2011 Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing
    Supersedes BS EN 13523-19:2004
  • BS EN 13976-2:2011 Rescue systems. Transportation of incubators. System requirements
    Supersedes BS EN 13976-2:2003
  • BS EN ISO 14254:2011 Soil quality. Determination of exchangeable acidity in barium chloride extracts
  • BS EN 14482:2010 Postal services. Trays for international letter mail. Test methods and performance requirements
    Supersedes DD CEN/TS 14482:2003
  • BS EN 14780:2011 Solid biofuels. Sample preparation
    Supersedes DD CEN/TS 14780:2005
  • BS EN 14869-1:2011 Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders
    Supersedes BS EN 14869-1:2004 and BS ISO 11003-1:2001
  • BS EN 14869-2:2011 Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test
    Supersedes BS EN 14869-2:2004 and BS ISO 11003-2:2001
  • BS EN 14961-2:2011 Solid biofuels. Fuel specifications and classes. Wood pellets for non-industrial use
  • BS EN 14961-3:2011 Solid biofuels. Fuel specifications and classes. Wood briquettes for non-industrial use
  • BS EN 14961-4:2011 Solid biofuels. Fuel specifications and classes. Wood chips for non-industrial use
  • BS EN 15080-12:2011 Extended application of results from fire resistance tests. Loadbearing masonry walls
  • BS EN 15895:2011 Cartridge operated hand-held tools. Safety requirements. Fixing and hard marking tools
  • BS EN 15919:2011 Fertilizers. Extraction of phosphorus soluble in 2 % formic acid
    Supersedes DD CEN/TS 15919:2009
  • BS EN 15920:2011 Fertilizers. Extraction of phosphorus soluble in 2 % citric acid
    Supersedes DD CEN/TS 15920:2009
  • BS EN 15921:2011 Fertilizers. Extraction of soluble phosphorus according to Petermann at 65?C
    Supersedes DD CEN/TS 15921:2009
  • BS EN 15922:2011 Fertilizers. Extraction of soluble phosphorus according to Petermann at ambient temperature
    Supersedes DD CEN/TS 15922:2009
  • BS EN 15923:2011 Fertilizers. Extraction of phosphorus soluble in Joulie's alcaline ammonium citrate
    Supersedes DD CEN/TS 15923:2009
  • BS EN ISO 15952:2011 Soil quality. Effects of pollutants on juvenile land snails (Helicidae). Determination of the effects on growth by soil contamination
  • BS EN 15964:2011 Breath alcohol test devices other than single use devices. Requirements and test methods
  • BS EN 15980:2011 Air quality. Determination of the deposition of benz[a]anthracene, enzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene
  • BS EN 15981:2011 European learner mobility. Achievement information (EuroLMAI)
  • BS EN 15987:2011 Leather. Terminology. Key definitions for the leather trade
  • BS EN 16074:2011 Paints and varnishes. Determination of nonvolatile- matter content and spreading rate of coil coating materials
  • BS EN ISO 16133:2011 Soil quality. Guidance on the establishment and maintenance of monitoring programmes
  • BS EN ISO 17076-2:2011 Leather. Determination of abrasion resistance. Martindale ball plate method
    Supersedes BS EN 14327:2003
  • BS EN ISO 22413:2011 Transfer sets for pharmaceutical preparations. Requirements and test methods
    Supersedes BS ISO 22413:2010
  • BS EN ISO 23908:2011 Sharps injury protection. Requirements and test methods. Sharps protection features for single use hypodermic needles, introducers for catheters and needles used for blood sampling
  • BS EN ISO 28706-1:2011 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by acids at room temperature
    Supersedes BS EN 14483-1:2004
  • BS EN ISO 28706-2:2011 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
    Supersedes BS EN 14483-2:2004
  • BS EN ISO 28706-3:2011 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
    Supersedes BS EN 14483-3:2004
  • BS EN ISO 28706-4:2011 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
    Supersedes BS EN 14483-4:2004
  • BS EN 50065-1:2011 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances
    Supersedes BS EN 50065-1:2001+A1:2010
  • BS EN 50128:2011 Railway applications. Communication, signaling and processing systems. Software for railway control and protection systems
    Supersedes BS EN 50128:2001
  • BS EN 50548:2011 Junction boxes for photovoltaic modules
  • BS EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP)
  • BS EN 50564:2011 Electrical and electronic household and office equipment. Measurement of low power consumption
    Supersedes BS EN 62301:2005 which remains current
  • BS EN 60068-2-5:2011 Environmental testing. Tests. Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
    Supersedes BS EN 60068-2-5:2000 and BS EN 60068-2-9:2000
  • BS EN 60086-2:2011 Primary batteries. Physical and electrical specifications
    Supersedes BS EN 60086-2:2007 which remains current
  • BS EN 60099-8:2011 Surge arresters. Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of A.C. systems above 1 kV
  • BS EN 60191-6-17:2011 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for stacked packages. Fine-pitch ball grid array and fine-pitch land grid array (P-PFBGA and PPFLGA)
  • BS EN 60268-7:2011 Sound system equipment. Headphones and earphones
    Supersedes the dual numbered standard BS EN 60268-7:1996, BS 6840-7:1996
  • BS EN 60519-6:2011 Safety in electroheat installations. Specifications for safety in industrial microwave heating equipment
    Supersedes BS EN 60519-6:2002
  • BS EN 60601-2-57:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
  • BS EN 60679-6:2011 Quartz crystal controlled oscillators of assessed quality. Phase jitter measurement method for quartz crystal oscillators and SAW oscillators. Application guidelines
    Supersedes DD IEC/PAS 60679-6:2008
  • BS EN 60704-2-13:2011 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for range hoods
    Supersedes BS EN 60704-2-13:2000+A2:2008 which remains current
  • BS EN 60728-3:2011 Cable networks for television signals, sound signals and interactive services. Active wideband equipment for cable networks
    Supersedes BS EN 60728-3:2006
  • BS EN 60763-1:2011 Laminated pressboard for electrical purposes. Definitions, classification and general requirements
    Supersedes BS EN 60763-1:1996 which remains current
  • BS EN 60904-5:2011 Photovoltaic devices. Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method
    Supersedes BS EN 60904-5:1996
  • BS EN 61169-18:2011 Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type SSMA
    Supersedes DD IEC/PAS 61169-18:2009
  • BS EN 61169-19:2011 Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type SSMB
    Supersedes DD IEC/PAS 61169-19:2009
  • BS EN 61236:2011 Live working. Saddles, stick clamps and their accessories
    Supersedes BS EN 61236:1995 which remains current
  • BS EN 61300-2-6:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Tensile strength of coupling mechanism
    Supersedes BS EN 61300-2-6:1997
  • BS EN 61300-3-22:2011 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Ferrule compression force
    Supersedes BS EN 61300-3-22:1997
  • BS EN 61746-2:2011 (BS 2000-521:2011) Calibration of optical time-domain reflectometers (OTDR). OTDR for multimode fibres
    Supersedes BS EN 61746:2005
  • BS EN 62305-3:2011 Protection against lightning. Physical damage to structures and life hazard
    Supersedes BS EN 62305-3:2006 which remains current
  • BS EN 62458:2011 Sound system equipment. Electroacoustic transducers. Measurement of large signal parameters
  • BS EN 62459:2011 Sound system equipment. Electroacoustic transducers. Measurement of suspension parts
  • BS EN 62502:2011 Analysis techniques for dependability. Event tree analysis (ETA)
  • BS EN 62684:2010 Interoperability specifications of common external power supply (EPS) for use with data enabled mobile telephones
  • BS EN ISO 80369-1:2010 Small bore connectors for liquids and gases in healthcare applications. General requirements
    Supersedes BS EN 15546-1:2008

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 3315:2011 Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests
  • BS ISO 6405-1:2004+A1:2010 Earth-moving machinery. Symbols for operator controls and other displays. Common symbols
    Supersedes BS 6913-8:1992
  • BS ISO 6462:2011 Face and shoulder milling cutters with indexable inserts. Dimensions
    Supersedes BS 4193-11:1983
  • BS ISO 7401:2011 Road vehicles. Lateral transient response test methods. Open-loop test methods
    Supersedes BS ISO 7401:2003
  • BS ISO 8038:2011 Microscopes. Screw threads for objectives and related nosepieces
    Supersedes BS 7012-4.1:1998 and BS ISO 8038-2:2001
  • BS ISO 8611-2:2011 Pallets for materials handling. Flat pallets. Performance requirements and selection of tests
  • BS ISO 8611-3:2011 Pallets for materials handling. Flat pallets. Maximum working loads
  • BS ISO 12924:2010 Lubricants, industrial oils and related products (Class L). Family X (Greases). Specification
  • BS ISO/IEC 13066-1:2011 Information technology. Interoperability with assistive technology (AT). Requirements and recommendations for interoperability
  • BS ISO 13124:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for interfacial bond strength of ceramic materials
  • BS ISO 15380:2011 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for categories HETG, HEPG, HEES and HEPR
    Supersedes BS ISO 15380:2002
  • BS ISO 16653-3:2011 Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features. MEWPs for orchard operations
  • BS ISO 16714:2008 Earth-moving machinery. Recyclability and recoverability. Terminology and calculation method
  • BS ISO 17359:2011 Condition monitoring and diagnostics of machines. General guidelines
    Supersedes BS ISO 13380:2002 and BS ISO 17359:2003
  • BS ISO/IEC 18046-3:2007 Information technology. Radio frequency identification device performance test methods. Test methods for tag performance
    Supersedes BS ISO/IEC 18046:2006 which remains current
  • BS ISO 18308:2011 Health informatics. Requirements for an electronic health record architecture
    Supersedes DD ISO/TS 18308:2004
  • BS ISO 20176:2011 Road vehicles. H-point machine (HPM-II). Specifications and procedure for H-point determination
    Supersedes BS ISO 20176:2006
  • BS ISO 20785-2:2011 Dosimetry for exposures to cosmic radiation in civilian aircraft. Characterization of instrument response
  • BS ISO 21307:2011 Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
  • BS ISO 22810:2010 Horology. Water-resistant watches
  • BS ISO 23500:2011 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
  • BS ISO/IEC 24745:2011 Information technology. Security techniques. Biometric information protection
  • BS ISO/IEC 27005:2011 Information technology. Security techniques. Information security risk management
    Supersedes BS ISO/IEC 27005:2008
  • BS ISO 29821-1:2011 Condition monitoring and diagnostics of machines. Ultrasound. General guidelines
  • BS ISO 50001:2011 Energy management systems. Requirements with guidance for use

PUBLISHED DOCUMENTS

  • PD 6688-1-1:2011 Recommendations for the design of structures to BS EN 1991-1-1
  • PD CEN/TR 16148:2011 Head and neck impact, burn and noise injury criteria. A Guide for CEN helmet standards committees
  • PD CEN/TR 16149:2011 Guidance Document for drafting CEN/TC 158 Standards
  • PD IEC/TR 62627-03-01:2011 Fibre optic interconnecting devices and passive components. Reliability. Design of an acceptance test for fibre pistoning failure of connectors during temperature and humidity cycling: demarcation analysis

PUBLICLY AVAILABLE SPECIFICATIONS

Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 92:2011 Code of practice for the implementation of a biometric system
  • PAS 125:2011 Automotive services. Specification for vehicle damage repair processes
    Supersedes PAS 125:2007
  • PAS 223:2011 Prerequisite programmes and design requirements for food safety in the manufacture and provision of food packaging
  • PAS 3621:2011 Multipoint locking assemblies. Keyed egress. Performance requirements and test methods
  • PAS 5748:2011 Specification for the planning, application and measurement of cleanliness services in hospitals
  • PAS 8621:2011 Multipoint locking assemblies. Keyless egress. Performance requirements and test methods
  • PAS 10621:2011 Multipoint locking assemblies. Dual mode egress. Performance requirements and test methods

CORRIGENDA TO BRITISH STANDARDS and UPDATED BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 2795:1981 Specification for dial test indicators (lever type) for linear measurement
    CORRIGENDUM 1
  • BS 3379:2005+A1:2011 Combustion modified flexible polyurethane cellular materials for loadbearing applications. Specification
    AMENDMENT 1
  • BS 6375-1:2009 Performance of windows and doors. Classification for weathertightness and guidance on selection and specification
    CORRIGENDUM 1
  • BS 7176:2007+A1:2011 Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites
    AMENDMENT 1
  • BS 7177:2008+A1:2011 Specification for resistance to ignition of mattresses, mattress pads, divans and bed bases
    AMENDMENT 1
  • BS EN 331:1998+A1:2010 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
    AMENDMENT 1
  • BS EN ISO 463:2006 Geometrical product specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
    CORRIGENDUM 2
  • BS EN 558:2008 Industrial valves. Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems. PN and Class designated valves
    CORRIGENDUM 1
  • BS EN 791:1995+A1:2009 Drill rigs. Safety
    AMENDMENT 1
  • BS EN 1090-1:2009 Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components
    CORRIGENDUM 1
  • BS EN 1113:2008+A1:2011 Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
    AMENDMENT 1
  • BS EN 1591-1:2001+A1:2009 Flanges and their joints. Design rules for gasketed circular flange connections. Calculation method
    CORRIGENDUM 1
  • BS EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines
    CORRIGENDUM 1
  • BS EN ISO 1874-2:2006+A1:2010 Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
    AMENDMENT 1
  • BS EN 2481:2010 Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1250 MPa ? Rm ? 1400 MPa. Forgings. De ? 75 mm
    CORRIGENDUM 1
  • BS EN 2482:2010 Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ? Rm ? 1300 MPa. Bars. De ? 100 mm
    CORRIGENDUM 1
  • BS EN 2483:2010 Aerospace series. Steel FE-PL2108 (36NiCrMo16). 1100 MPa ? Rm ? 1300 MPa. Forgings. De ? 100 mm
    CORRIGENDUM 1
  • BS EN ISO 2858:2010 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions
    CORRIGENDUM 1
  • BS EN ISO 4254-10:2009 Agricultural machinery. Safety. Rotary tedders and rakes
    CORRIGENDUM 2
  • BS EN 4638:2010 Aerospace series. Blast media. Brown corundum, without iron
    CORRIGENDUM 1
  • BS EN 4670:2010 Aerospace series. Steel FEPM1507 (X1CrNiMoAlTi12-11-2). Vacuum induction melted and consumable electrode remelted. Softened. Forging stock. a or D ? 300 mm
    CORRIGENDUM 1
  • BS EN ISO 8394-2:2010 Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus
    CORRIGENDUM 1
  • PD CEN ISO/TR 10400:2011 Petroleum and natural gas industries. Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
    CORRIGENDUM 1
  • BS EN ISO 10821:2005+A1:2009 Industrial sewing machines. Safety requirements for sewing machines, units and systems
    CORRIGENDUM 1
  • BS EN ISO 11363-1:2010 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders. Specifications
    CORRIGENDUM 1
  • BS EN ISO 11664-4:2011 Colorimetry. CIE 1976 L*a*b* Colour space
    CORRIGENDUM 1
  • BS EN ISO 11664-5:2011 Colorimetry. CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram
    CORRIGENDUM 1
  • BS EN ISO 11737-1:2006 Sterilization of medical devices. Microbiological methods. Determination of a population of microorganisms on products
    CORRIGENDUM 2
  • BS EN ISO 11979-8:2009+A1:2011 Ophthalmic implants. Intraocular lenses. Fundamental requirements
    AMENDMENT 1
  • BS EN 12354-5:2009 Building acoustics. Estimation of acoustic performance of building from the performance of elements. Sounds levels due to the service equipment
    CORRIGENDUM 1
  • BS EN ISO 12402-7:2007+A1:2011 Personal flotation devices. Materials and components. Safety requirements and test methods
    AMENDMENT 1
  • BS EN ISO 12402-8:2006+A1:2011 Personal flotation devices. Accessories. Safety requirements and test methods
    AMENDMENT 1
  • BS EN 12413:2007+A1:2011 Safety requirements for bonded abrasive products
    AMENDMENT 1
  • BS EN 12463:2004+A1:2011 Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 12586:2007+A1:2011 Child use and care articles. Soother holder. Safety requirements and test methods
    AMENDMENT 1
  • BS EN 12591:2009 Bitumen and bituminous binders. Specifications for paving grade bitumens
    CORRIGENDUM 1
  • BS EN 12808-4:2009 Grouts for tiles. Determination of shrinkage
    CORRIGENDUM 1
  • BS EN 13000:2010 Cranes. Mobile cranes
    CORRIGENDUM 1
  • BS EN 13262:2004+A2:2011 Railway applications. Wheelsets and bogies. Wheels. Product requirements
    AMENDMENT 2
  • BS EN 13480-2:2002+A2:2010 Metallic industrial piping. Materials
    AMENDMENT 2
  • BS EN 13480-3:2002+A4:2010 Metallic industrial piping. Design and calculation
    CORRIGENDUM 1
  • BS EN 13683:2003+A2:2011 Garden equipment. Integrally powered shredders/chippers. Safety
    AMENDMENT 2
  • BS EN 13814:2004 Fairground and amusement park machinery and structures. Safety
    CORRIGENDUM 2
  • BS EN 13924:2006 Bitumen and bituminous binders. Specifications for hard paving grade bitumens
    CORRIGENDUM 2
  • BS EN 13979-1:2003+A2:2011 Railway applications. Wheelsets and bogies. Monobloc wheels. Technical approval procedure. Forged and rolled wheels
    AMENDMENT 2
  • BS EN 14081-1:2005+A1:2011 Timber structures. Strength graded structural timber with rectangular cross section. General requirements
    AMENDMENT 1
  • BS EN 14154-1:2005+A2:2011 Water meters. General requirements
    AMENDMENT 2
  • BS EN 14154-2:2005+A2:2011 Water meters. Installation and conditions of use
    AMENDMENT 2
  • BS EN 14154-3:2005+A2:2011 Water meters. Test methods and equipment
    AMENDMENT 2
  • BS EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps. Vessels. General requirements
    AMENDMENT 1
  • BS EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps. Piping. General requirements
    AMENDMENT 1
  • BS EN 14535-1:2005+A1:2011 Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
    AMENDMENT 1
  • BS EN 15037-2:2009+A1:2011 Precast concrete products. Beam-and-block floor systems. Concrete blocks
    AMENDMENT 1
  • BS EN 15220-1:2008+A1:2011 Railway applications. Brake indicators. Pneumatically operated brake indicators
    AMENDMENT 1
  • BS EN 15241:2007 Ventilation for buildings. Calculation methods for energy losses due to ventilation and infiltration in buildings
    CORRIGENDUM 1
  • BS EN ISO 19334:2011 Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis
    CORRIGENDUM 1
  • DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
    CORRIGENDUM 1
  • BS EN ISO 25539-1:2009 Cardiovascular implants. Endovascular devices. Endovascular prostheses
    CORRIGENDUM 2
  • BS EN ISO 25539-2:2009 Cardiovascular implants. Endovascular devices. Vascular stents
    CORRIGENDUM 1
  • BS EN 50174-1:2009+A1:2011 Information technology. Cabling installation. Installation specification and quality assurance
    AMENDMENT 1
  • BS EN 55016-1-1:2010+A1:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus
    AMENDMENT 1
  • BS EN 55016-1-4:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements
    CORRIGENDUM 1
  • BS EN 55016-2-1:2009+A1:2011 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Conducted disturbance measurements
    AMENDMENT 1
  • BS EN 55016-2-3:2010+A1:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
    AMENDMENT 1
  • BS EN 60065:2002+A12:2011 Audio, video and similar electronic apparatus. Safety requirements
    AMENDMENT 12
  • BS EN 60079-26:2007 Explosive atmospheres. Equipment with equipment protection level (EPL) Ga
    CORRIGENDUM 1
  • BS EN 60079-29-1:2007 Explosive atmospheres. Gas detectors. Performance requirements of detectors for flammable gases
    CORRIGENDUM 1
  • BS EN 60335-2-9:2003+A13:2010 Household and similar electrical appliances. Safety. Particular requirements for grills, toasters and similar portable cooking appliances
    AMENDMENT 13
  • BS EN 60335-2-27:2010 Household and similar electrical appliances. Safety. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
    CORRIGENDUM 1
  • BS EN 60512-26-100:2008+A1:2011 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g
    AMENDMENT 1
  • BS EN 60745-2-13:2009+A1:2011 Hand-held motor-operated electric tools. Safety. Particular requirements for chain saws
    AMENDMENT 1
  • BS EN 60749-15:2010 Semiconductor devices. Mechanical and climatic test methods. Resistance to soldering temperature for through-hole mounted devices
    CORRIGENDUM 1
  • BS EN 60749-23:2004+A1:2011 Semiconductor devices. Mechanical and climatic test methods. High temperature operating life
    AMENDMENT 1
  • BS EN 60950-1:2006+A12:2011 Information technology equipment. Safety. General requirements
    AMENDMENT 12
  • BS EN 61000-4-16:1998+A2:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
    AMENDMENT 2
  • BS EN 61000-6-3:2007+A1:2011 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
    AMENDMENT 1
  • BS EN 61000-6-4:2007+A1:2011 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
    AMENDMENT 1
  • BS EN 61242:1997+A1:2008 Electrical accessories. Cable reels for household and similar purposes
    AMENDMENT 1
  • BS EN 61347-2-2:2001+A2:2006 Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic step-down convertors for filament lamps
    CORRIGENDUM 3
  • BS EN 61347-2-3:2001+A2:2006 Lamp controlgear. Particular requirements for A.C. supplied electronic ballasts for fluorescent lamps
    CORRIGENDUM 2
  • BS EN 61347-2-7:2006 Lamp controlgear. Particular requirements for D.C. supplied electronic ballasts for emergency lighting
    CORRIGENDUM 1
  • BS EN 61347-2-10:2001+A1:2009 Lamp controlgear. Particular requirements for electronic invertors and convertors for high frequency operation of cold tubular discharge lamps (neon tubes)
    CORRIGENDUM 1
  • BS EN 61386-21:2004+A11:2010 Conduit systems for cable management. Particular requirements. Rigid conduit systems
    AMENDMENT 11
  • BS EN 61386-22:2004+A11:2010 Conduit systems for cable management. Particular requirements. Pliable conduit systems
    AMENDMENT 11
  • BS EN 61386-23:2004+A11:2010 Conduit systems for cable management. Particular requirements. Flexible conduit systems
    AMENDMENT 11
  • BS EN 62374-1:2010 Semiconductor devices. Time-dependent dielectric breakdown (TDDB) test for intermetal layers
    CORRIGENDUM 1
  • DD CLC/TS 62395-2:2010 Electrical resistance trace heating systems for industrial and commercial applications. Application guide for system design, installation and maintenance
    CORRIGENDUM 2
  • BS ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
    CORRIGENDUM 1
  • BS ISO 8217:2010 Petroleum products. Fuels (class F). Specifications of marine fuels
    CORRIGENDUM 1
  • BS ISO 8573-4:2001 Compressed air. Test methods for solid particle content
    CORRIGENDUM 1
  • BS ISO 10216:2010 Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
    CORRIGENDUM 1
  • BS ISO 12643-2:2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Prepress and press equipment and systems
    CORRIGENDUM 1
  • BS ISO 12646:2008+A1:2010 Graphic technology. Displays for colour proofing. Characteristics and viewing conditions
    AMENDMENT 1
  • BS ISO 13347-1:2004+A1:2010 (BS 848-2.1:2004) Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. General overview
    AMENDMENT 1
  • BS ISO 13347-3:2004+A1:2010 (BS 848-2.3:2004) Industrial fans. Determination of fan sound power levels under standardized laboratory conditions. Enveloping surface methods
    AMENDMENT 1
  • BS ISO 13399-1:2006+A1:2010 Cutting tool data representation and exchange. Overview, fundamental principles and general information model
    CORRIGENDUM 2
  • DD ISO/TS 13399-3:2007 Cutting tool data representation and exchange. Reference dictionary for tool items
    CORRIGENDUM 1
  • BS ISO/IEC 16022:2006 Information technology. Automatic identification and data capture techniques. Data Matrix bar code symbology specification
    CORRIGENDUM 2
  • BS ISO/IEC 18033-1:2005+A1:2011 Information technology. Security techniques. Encryption algorithms. General
    AMENDMENT 1
  • BS ISO 18437-2:2005+A1:2010 Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Resonance method
    AMENDMENT 1
  • BS ISO 21561:2005+A1:2010 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
    AMENDMENT 1
  • BS ISO 22201:2009 Lifts (elevators). Design and development of programmable electronic systems in safety related applications for lifts (PESSRAL)
    CORRIGENDUM 1
  • BS ISO/IEC 24727-3:2008 Identification cards. Integrated circuit card programming interfaces. Application interface
    CORRIGENDUM 1
  • BS IEC 60092-504:2001 Electrical installations in ships. Special features. Control and instrumentation
    CORRIGENDUM 1

BRITISH STANDARDS WITHDRAWN

  • BS 2011-2.1T:1981 (IEC 60068-2-20:1979) Environmental testing. Tests. Test T. Soldering
    Superseded by BS EN 60068-2-20:2008
  • BS 3690-1:1989+A2:2008 Bitumens for building and civil engineering. Specification for bitumens for roads and other paved areas
    Superseded by BS EN 12591:2009 and BS EN 13924:2006
  • BS 4193-11:1983 (ISO 6462:1983) Hardmetal insert tooling. Specification for dimensions of face milling cutters with indexable inserts
    Superseded by BS ISO 6462:2011
  • BS 5992-1:1980 (IEC 60255-0-20:1974) Electrical relays. Specification for contact performance of electrical relays
    Superseded by BS EN 60255-23:1997
  • BS 6913-8:1992 (ISO 6405-1:1991) Operation and maintenance of earth-moving machinery. Specification for common symbols for operator controls and other displays
    Superseded by BS ISO 6405-1:2004+A1:2010
  • BS 7012-4.1:1998 (ISO 8038-1:1997) Light microscopes. Specification for microscope objective and nosepiece screw threads. Screw thread type RMS (4/5 in x 1/36 in)
    Superseded by BS ISO 8038:2011
  • BS EN 71-6:1995 (BS 5665-6:1995) Safety of toys. Graphical symbols for age warning labeling
    Users are recommended to use BS EN 71-1:2011 which incorporates requirements for age warning labeling
  • BS EN 1041:1998 Information supplied by the manufacturer with medical devices
    Superseded by BS EN 1041:2008
  • DD ENV 1627:1999 Windows, doors, shutters. Burglar resistance. Requirements and classification
    Superseded by BS EN 1627:2011
  • DD ENV 1628:1999 Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance under static loading
    Superseded by BS EN 1628:2011
  • DD ENV 1629:1999 Windows, doors, shutters. Burglar resistance. Test method for determination of resistance under dynamic loading
    Superseded by BS EN 1629:2011
  • DD ENV 1630:1999 Windows, doors, shutters. Burglar resistance. Test method for the determination of resistance to manual burglary attempts
    Superseded by BS EN 1630:2011
  • BS EN 12006-3:1998+A1:2009 Non active surgical implants. Particular requirements for cardiac and vascular implants. Endovascular devices
    Superseded by BS EN ISO 25539-1:2009 and BS EN ISO 25539-2:2009
  • DD ENV 13459-1:1999 Road marking. Materials. Quality control. Sampling from storage and testing
    Superseded by BS EN 13459:2011
  • BS EN 14327:2003 Leather. Physical and mechanical tests. Determination of abrasion resistance of automotive leather|
    Superseded by BS EN ISO 17076-2:2011
  • DD CEN/TS 14482:2003 Postal services. Trays for international letter mail. Test methods and performance requirements
    Superseded by BS EN 14482:2010
  • BS EN 14483-1:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by acids at room temperature
    Superseded by BS EN ISO 28706-1:2011
  • BS EN 14483-2:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by boiling acids, neutral liquids and/or their vapours
    Superseded by BS EN ISO 28706-2:2011
  • BS EN 14483-3:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
    Superseded by BS EN ISO 28706-3:2011
  • BS EN 14483-4:2004 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
    Superseded by BS EN ISO 28706-4:2011
  • DD CEN/TS 14780:2005 Solid biofuels. Methods for sample preparation
    Superseded by BS EN 14780:2011
  • BS EN 15546-1:2008 Small bore connectors for liquids and gases in healthcare applications. General requirements
    Superseded by BS EN ISO 80369-1:2010
  • DD CEN/TS 15919:2009 Fertilizers. Extraction of phosphorus soluble in 2% formic acid
    Superseded by BS EN 15919:2011
  • DD CEN/TS 15920:2009 Fertilizers. Extraction of phosphorus soluble in 2% citric acid
    Superseded by BS EN 15920:2011
  • DD CEN/TS 15921:2009 Fertilizers. Extraction of phosphorus soluble in alkaline ammonium citrate according to Petermann at 65?C
    Superseded by BS EN 15921:2011
  • DD CEN/TS 15922:2009 Fertilizers. Extraction of soluble phosphorus according to Petermann at ambient temperature
    Superseded by BS EN 15922:2011
  • DD CEN/TS 15923:2009 Fertilizers. Extraction of phosphorus soluble in Joulie's alkaline ammonium citrate
    Superseded by BS EN 15923:2011
  • BS EN 50086-1:1994 Specification for conduit systems for cable management. General requirements
    Superseded by BS EN 61386-1:2004
  • BS EN 60068-2-9:2000 Environmental testing. Test methods. Tests. Guidance for solar radiation testing
    Superseded by BS EN 60068-2-5:2011
  • BS EN 60730-2-14:1998 Automatic electrical controls for household and similar use. Particular requirements for electric actuators
    Superseded by BS EN 60730-2-14:1997+A2:2008
  • BS EN 61557-6:1998 Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures. Residual current
    Superseded by BS EN 61557-6:2007
  • BS EN 61746:2005 Calibration of optical time-domain reflectometers (OTDR)
    Superseded by BS EN 61746-1:2011 and BS EN 61746-2:2011
  • BS EN 61747-3-1:2000 (BS IEC 61747-3-1:1998) Liquid crystal and solid-state display devices. Liquid crystal display (LCD) cells. Blank detail specification
    Superseded by BS EN 61747-3-1:2006
  • BS EN 116000-1:1996 Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays. General
    Superseded by BS EN 61811-1:1999
  • BS EN 119000:1997 Harmonized system of quality assessment for electronic components. Generic specification: dry and mercury wetted reed contact units
    Superseded by BS EN 62246-1:2002
  • BS EN 170000:1999 Harmonized system of quality assessment for electronic components. Generic specification: waveguide type dielectric resonators
    Superseded by BS EN 61338-1:2005
  • BS EN 175300:1992 Harmonized system of quality assessment for electronic components. Sectional specification: rectangular connectors for frequencies below 3 MHz
    Superseded by BS EN 175300:1997
  • BS ISO 8038-2:2001 Optics and optical instruments. Screw threads for microscope objectives and related nosepieces. Screw thread type M25 x 0,75 mm
    Superseded by BS ISO 8038:2011
  • BS ISO 11003-1:2001 Adhesives. Determination of shear behaviour of structural adhesives. Torsion test method using butt-bonded hollow cylinders
    Superseded by BS EN 14869-1:2011
  • BS ISO 11003-2:2001 Adhesives. Determination of shear behaviour of structural adhesives. Tensile test method using thick adherends
    Superseded by BS EN 14869-2:2011
  • BS ISO 13380:2002 Condition monitoring and diagnostics of machines. General guidelines on using performance parameters
    Superseded by BS ISO 17359:2011
  • DD ISO/TS 18308:2004 Health informatics. Requirements for an electronic health record architecture
    Superseded by BS ISO 18308:2011
  • BS ISO 26987:2008 Resilient floor coverings. Determination of staining and resistance to chemicals
    This standard has been withdrawn as it conflicts with BS EN 423:2002
  • DD IEC/PAS 60679-6:2008 Quartz crystal controlled oscillators of assessed quality. Phase jitter measurement method for quartz crystal oscillators and SAW oscillators. Application guide
    Superseded by BS EN 60679-6:2011
  • DD IEC/PAS 61169-18:2009 Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type SSMA
    Superseded by BS EN 61169-18:2011
  • DD IEC/PAS 61169-19:2009 Radio-frequency connectors. Sectional specification for SSMB series R.F. coaxial connectors
    Superseded by BS EN 61169-19:2011
  • BS IEC 62443-2-1:2010 Industrial communication networks. Network and system security. Establishing an industrial automation and control system security program
    This standard has been withdrawn as it was published in error
  • BS CECC 30202:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
    Superseded by BS EN 130202:1998
  • BS CECC 30300:1992 Harmonized system of quality assessment for electronic components. Sectional specification: aluminium electrolytic capacitors with solid and non-solid electrolyte
    Superseded by BS EN 130300:1998
  • BS CECC 30500:1989 Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
    Superseded by BS EN 130500:1998
  • BS CECC 30501:1993 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed metalized polycarbonate film dielectric capacitors for direct current
    Superseded by BS EN 130501:1998
  • BS CECC 31201:1981 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed capacitors with metallized electrodes and polypropylene
    Superseded by BS EN 131201:2002
  • PD 7639-1:1994 (IEC 60909-1:1991) Short-circuit current calculation in three-phase A.C. systems. Factors for the calculation of short-circuit currents in three-phase A.C. systems according to BS 7639
    Superseded by PD IEC/TR 60909-1:2002
  • BS QC 160100:1987 (IEC 60255-19:1983) Harmonized system of quality assessment for electronic components. Electrical relays. Sectional specification: electromechanical all-or-nothing relays
    Superseded by BS EN 61811-10:2003
  • BS QC 160101:1987 (IEC 60255-19-1:1983) Specification for harmonized system of quality assessment for electronic components. Electrical relays. Blank detail specification. Electromechanical all-or-nothing relays. Test
    Superseded by BS EN 61811-11:2003

Published in international.