ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
    Reapproved, available as A139/A139M-04(2010)
  • A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
    Reapproved, available as A618/A618M-04(2010)
  • A822/A822M Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
    Reapproved, available as A822/A822M-04(2010)
  • A972/A972M Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
    Reapproved, available as A972/A972M-00(2010)
  • A1005/A1005M Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded
    Reapproved, available as A1005/A1005M-00(2010)
  • A1006/A1006M Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded
    Reapproved, available as A1006/A1006M-00(2010)
  • B645 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
    Revised to B645-10
  • C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
    Revised to C62-10
  • C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
    Revised to C126-10
  • C410 Standard Specification for Industrial Floor Brick
    Revised to C410-10
  • C844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
    Reapproved, available as C844-04(2010)
  • C902 Standard Specification for Pedestrian and Light Traffic Paving Brick
    Revised to C902-10
  • C956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
    Reapproved, available as C956-04(2010)
  • C980 Standard Specification for Industrial Chimney Lining Brick
    Revised to C980-10
  • C1077 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
    Revised to C1077-10c
  • C1094 Standard Guide for Flexible Removable Insulation Covers (Withdrawn 2010)
    Withdrawn with no replacement. C1094-01(2006)
  • C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
    Revised (with title change) to C1242-10
  • C1261 Standard Specification for Firebox Brick for Residential Fireplaces
    Revised to C1261-10
  • C1360 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    Revised to C1360-10
  • C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
    Revised to C1361-10
  • C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
    Revised (with title change) to C1519-10
  • C1639 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation
    Revised to C1639-10a
  • D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
    Revised to D86-10a
  • D868 Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
    Revised (with title change) to D868-10
  • D975 Standard Specification for Diesel Fuel Oils
    Revised to D975-10b
  • D1039 Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
    Reapproved, available as D1039-94(2010)
  • D1896/D1896M Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
    Revised (with designation change) to D1896/D1896M-10
  • D2057 Standard Test Method for Colorfastness of Zippers to Laundering
    Reapproved, available as D2057-05(2010)
  • D2060 Standard Test Methods for Measuring Zipper Dimensions
    Reapproved, available as D2060-00(2010)
  • D2369 Standard Test Method for Volatile Content of Coatings
    Revised to D2369-10
  • D2463 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
    Revised to D2463-10b
  • D2494 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow
    Reapproved (with editorial change), available as D2494-02(2010)e1
  • D2684 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
    Revised to D2684-10
  • D2839 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
    Revised to D2839-10
  • D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    Revised to D2863-10
  • D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
    Revised to D3018/D3018M-10a
  • D3056 Standard Test Method for Gel Time of Solventless Varnishes
    Reapproved, available as D3056-05(2010)
  • D3157 Standard Test Method for Rubber from Natural Sources – Color
    Reapproved (with editorial change), available as D3157-05(2010)e1
  • D3208 Standard Specification for Manifold Papers for Permanent Records (Withdrawn 2010)
    Withdrawn with no replacement. D3208-00(2005)
  • D3290 Standard Specification for Bond and Ledger Papers for Permanent Records (Withdrawn 2010)
    Withdrawn with no replacement. D3290-00(2005)
  • D3301 Standard Specification for File Folders for Storage of Permanent Records (Withdrawn 2010)
    Withdrawn with no replacement. D3301-00(2005)
  • D3458 Standard Specification for Copies from Office Copying Machines for Permanent Records (Withdrawn 2010)
    Withdrawn with no replacement. D3458-00(2005)
  • D3514/D3514M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
    Revised (with designation change) to D3514/D3514M-10
  • D3641 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
    Revised to D3641-10
  • D3693 Standard Specification for Labeled Length per Holder of Sewing Thread
    Reapproved, available as D3693-02(2010)
  • D3769 Standard Test Method for Microcellular Urethanes – High Temperature Sag
    Revised to D3769-10
  • D3950 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    Revised to D3950-10a
  • D4246 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
    Reapproved, available as D4246-02(2010)
  • D4389/D4389M Standard Specification for Finished Glass Fabrics Woven From Rovings
    Reapproved (with editorial change), available as D4389/D4389M-04(2010)e1
  • D4465 Standard Performance Specification for Zippers for Denim Dungarees
    Reapproved, available as D4465-05(2010)
  • D4872 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
    Reapproved, available as D4872-99(2010)
  • D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
    Revised to D5006-10
  • D5169 Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
    Reapproved, available as D5169-98(2010)
  • D5170 Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners
    Reapproved, available as D5170-98(2010)
  • D5238 Standard Test Method for Smoldering Combustion Potential of Cotton-Based Batting
    Revised to D5238-10
  • D5253 Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture
    Reapproved (with editorial change), available as D5253-04(2010)e1
  • D5408 Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors
    Reapproved (with editorial change), available as D5408-93(2010)e1
  • D5409/D5409M Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two-Physical Descriptors A change in designation. The new designation is D5409/D5409M-93(2010)e1
  • D5447 Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem
    Reapproved, available as D5447-04(2010)
  • D5492 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
    Revised to D5492-10
  • D5523 Standard Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
    Revised to D5523-10
  • D5634 Standard Guide for Selection of Permanent and Durable Offset and Book Papers (Withdrawn 2010)
    Withdrawn with no replacement. D5634-01(2006)
  • D5638 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
    Reapproved, available as D5638-05(2010)
  • D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging
    Reapproved, available as D5753-05(2010)
  • D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
    Revised to D5800-10
  • D5848 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
    Editorially changed, available as D5848-10e1
  • D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems
    Reapproved, available as D5879-95(2010)
  • D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
    A change in designation. The new designation is D5911/D5911M-96(2010)e1
  • D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
    Reapproved, available as D5921-96(2010)
  • D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
    Reapproved, available as D5922-96(2010)
  • D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
    Reapproved, available as D5923-96(2010)
  • D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
    Reapproved, available as D5924-96(2010)
  • D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
    Reapproved (with editorial change), available as D5980-96(2010)e1
  • D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
    Revised to D5994-10
  • D5995 Standard Guide for Environmental Site Characterization in Cold Regions
    Reapproved, available as D5995-98(2010)
  • D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
    Reapproved (with editorial change), available as D6028-96(2010)e1
  • D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
    Reapproved (with editorial change), available as D6029-96(2010)e1
  • D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
    Reapproved (with editorial change), available as D6034-96(2010)e1
  • D6043 Standard Guide for Selection of Permanent and Durable Artist's Paper (Withdrawn 2010)
    Withdrawn with no replacement. D6043-01(2006)
  • D6089 Standard Guide for Documenting a Ground-Water Sampling Event
    Reapproved, available as D6089-97(2010)
  • D6106 Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers
    Reapproved, available as D6106-97(2010)
  • D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
    Revised to D6109-10
  • D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
    Reapproved, available as D6168-97(2010)
  • D6170 Standard Guide for Selecting a Ground-Water Modeling Code
    Reapproved, available as D6170-97(2010)
  • D6171 Standard Guide for Documenting a Ground-Water Modeling Code
    Reapproved, available as D6171-97(2010)
  • D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
    Reapproved, available as D6187-97(2010)
  • D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
    Revised to D6217-10
  • D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites
    Reapproved, available as D6235-04(2010)
  • D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
    Revised to D6338-10
  • D6351 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
    Revised to D6351-10
  • D6395 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
    Revised to D6395-10
  • D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation
    Reapproved, available as D6430-99(2010)
  • D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
    Reapproved, available as D6431-99(2010)
  • D6478 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
    Revised to D6478-10
  • D6584 Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
    Revised (with title change) to D6584-10
  • D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
    Reapproved, available as D6684-04(2010)
  • D6724 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells
    Reapproved, available as D6724-04(2010)
  • D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
    Reapproved, available as D6725-04(2010)
  • D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    Revised to D6750-10a
  • D6774 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
    Reapproved, available as D6774-02(2010)
  • D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
    Reapproved, available as D6884-03(2010)
  • D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
    Revised to D6890-10a
  • D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
    Reapproved, available as D6911-03(2010)
  • D6914 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
    Reapproved, available as D6914-04(2010)
  • D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
    Revised to D6926-10
  • D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
    Revised to D6984-10a
  • D7019 Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics
    Reapproved, available as D7019-05(2010)
  • D7045 Standard Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
    Reapproved, available as D7045-04(2010)
  • D7048 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
    Reapproved, available as D7048-04(2010)
  • D7069 Standard Guide for Field Quality Assurance in a Ground-water Sampling Event
    Reapproved, available as D7069-04(2010)
  • D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
    Reapproved, available as D7128-05(2010)
  • D7269/D7269M Standard Test Methods for Tensile Testing of Aramid Yarns
    Revised (with designation change) to D7269/D7269M-10
  • D7311/D7311M Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane
    Revised (with designation change) to D7311/D7311M-10
  • D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
    Revised to D7320-10a
  • D7466 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
    Revised to D7466-10
  • D7468 Standard Test Method for Cummins ISM Test
    Revised to D7468-10a
  • D7611/D7611M-10 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • D7654/D7654M-10 Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
  • D7620-10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • D7647-10 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
  • D7659-10 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
  • D7660-10 Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
  • E202 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
    Revised to E202-10
  • E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
    Editorially changed, available as E292-09e1
  • E668 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
    Revised to E668-10
  • E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
    Revised to E970-10
  • E1143 Standard Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect To a Test Parameter
    Reapproved, available as E1143-05(2010)
  • E1239 Standard Practice for Description of Reservation/Registration-Admission, Discharge, Transfer (R-ADT) Systems for Electronic Health Record (EHR) Systems
    Reapproved, available as E1239-04(2010)
  • E1340 Standard Guide for Rapid Prototyping of Information Systems
    Reapproved, available as E1340-05(2010)
  • E1740 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
    Revised to E1740-10
  • E1744 Standard Practice for View of Emergency Medical Care in the Electronic Health Record
    Reapproved, available as E1744-04(2010)
  • E1868 Standard Test Method for Loss-On-Drying by Thermogravimetry
    Revised to E1868-10
  • E1869 Standard Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including Electronic Health Records
    Reapproved, available as E1869-04(2010)
  • E2017 Standard Guide for Amendments to Health Information
    Reapproved, available as E2017-99(2010)
  • E2211 Standard Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal (Consumer) Health Record
    Reapproved, available as E2211-02(2010)
  • E2212 Standard Practice for Healthcare Certificate Policy
    Reapproved, available as E2212-02a(2010)
  • E2232 Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
    Revised to E2232-10
  • E2364 Standard Guide to Speech Recognition Technology Products in Health Care
    Reapproved, available as E2364-04(2010)
  • E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
    Revised to E2404-10
  • E2446 Standard Practice for Classification of Computed Radiology Systems
    Reapproved, available as E2446-05(2010)
  • E2599 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics
    Revised to E2599-10
  • E2690-10 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
  • E2733-10 Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems
  • F429 Standard Test Method for Shock-Attenuation Characteristics of Protective Headgear for Football
    Revised to F429-10
  • F493 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
    Revised to F493-10
  • F564 Standard Specification and Test Methods for Metallic Bone Staples
    Revised to F564-10
  • F717 Standard Specification for Football Helmets
    Revised to F717-10
  • F748 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
    Reapproved, available as F748-06(2010)
  • F873 Standard Guide for Incinerating Oil Spill Wastes at Temporary Field Locations (Withdrawn 2010)
    Withdrawn with no replacement. F873-84(2003)
  • F981 Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
    Reapproved, available as F981-04(2010)
  • F1834 Standard Guide for Consideration of Anaerobic Bioremediation as a Chemical Pollutant Mitigation Method on Land (Withdrawn 2010)
    Withdrawn with no replacement. F1834-98(2004)
  • F1877 Standard Practice for Characterization of Particles
    Reapproved, available as F1877-05(2010)
  • F1952 Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
    Revised to F1952-10
  • F2004 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
    Reapproved, available as F2004-05(2010)
  • F2075 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
    Revised to F2075-10a
  • F2083 Standard Specification for Total Knee Prosthesis
    Revised to F2083-10
  • F2255 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
    Reapproved, available as F2255-05(2010)
  • F2256 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
    Reapproved, available as F2256-05(2010)
  • F2258 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
    Reapproved, available as F2258-05(2010)
  • F2275 Standard Practice for Treestand Manufacturer Quality Assurance Program
    Revised to F2275-10
  • F2337 Standard Test Method for Treestand Fall Arrest System
    Revised to F2337-10
  • F2382 Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)
    Reapproved, available as F2382-04(2010)
  • F2458 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
    Reapproved, available as F2458-05(2010)
  • F2659-10 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
  • F2704-10 Standard Specification for Air-Fed Protective Ensembles

Published in international.