BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 2869:2010 Fuel oils for agricultural, domestic and industrial engines and boilers. Specification
    Supersedes BS 2869:2006 which remains current
  • BS 6626:2010 Maintenance of electrical switchgear and controlgear for voltages above 1 kV and up to and including 36 kV. Code of practice|
    Supersedes BS 6626:1985
  • BS 8903:2010 Principles and framework for procuring sustainably. Guide

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN ISO 105-E05:2010 Textiles. Tests for colour fastness. Colour fastness to spotting. Acid
    Supersedes BS EN ISO 105-E05:2006
  • BS EN 115-2:2010 Safety of escalators and moving walks. Rules for the improvement of safety of existing escalators and moving walks
  • BS EN 421:2010 Protective gloves against ionizing radiation and radioactive contamination
    Supersedes BS EN 421:1994
  • BS EN 1007-7:2010 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
  • BS EN 1069-1:2010 Water slides. Safety requirements and test methods
    Supersedes BS EN 1069-1:2000
  • BS EN 1069-2:2010 Water slides. Instructions
    Supersedes BS EN 1069-2:2000
  • BS EN 1317-1:2010 Road restraint systems. Terminology and general criteria for test methods
    Supersedes BS EN 1317-1:1998
  • BS EN 1317-2:2010 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets
    Supersedes BS EN 1317-2:1998
  • BS EN 1317-3:2010 Road restraint systems. Performance classes, impact test acceptance criteria and test methods for crash cushions
    Supersedes BS EN 1317-3:2000
  • BS EN 1493:2010 Vehicle lifts
    Supersedes BS EN 1493:1999+A1:2008
  • BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
    Supersedes BS EN 1533:2000
  • BS EN ISO 1716:2010 Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)
    Supersedes BS EN ISO 1716:2002
  • BS EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
    Supersedes BS EN 1777:2004+A1:2009
  • BS EN 1854:2010 Pressure sensing devices for gas burners and gas burning appliances
    Supersedes BS EN 1854:2006 which remains current
  • BS EN 1911:2010 Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
    Supersedes BS EN 1911-1:1998, BS EN 1911-2:1998 and BS EN 1911-3:1998
  • BS EN 1938:2010 Personal eye protection. Goggles for motorcycle and moped users
    Supersedes BS EN 1938:1999
  • BS EN ISO 2085:2010 Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
    Supersedes BS EN 12373-16:2001
  • BS EN ISO 2931:2010 Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    Supersedes BS EN 12373-5:1999
  • BS EN 3475-307:2010 Aerospace series. Cables, electrical, aircraft use. Test methods. Corona extinction voltage
    Supersedes BS EN 3475-307:2005
  • BS EN 3475-604:2010 Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to dry arc propagation
    Supersedes BS EN 3475-604:2002
  • BS EN 3475-605:2010 Aerospace series. Cables, electrical, aircraft use. Test methods. Wet short circuit test
    Supersedes BS EN 3475-605:2002
  • BS EN 3660-011:2010 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, 90º, shielded, sealed, for heat shrinkable boot. Product standard
  • BS EN 3719:2010 Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
    Supersedes BS EN 3719:2005
  • BS EN ISO 3741:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
    Supersedes BS EN ISO 3741:2000
  • BS EN ISO 3745:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for anechoic and semi-anechoic rooms
    Supersedes BS EN ISO 3745:2003
  • BS EN 4673-001:2010 Aerospace series. Inserts, UNJ threads, selflocking, with self-broaching keys. Installation and removal procedure
  • BS EN 4673-002:2010 Aerospace series. Inserts, UNJ threads, selflocking, with self-broaching keys. Design standard
  • BS EN 4673-004:2010 Aerospace series. Inserts, UNJ threads, selflocking, with self-broaching keys. In heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plating
  • BS EN 4673-005:2010 Aerospace series. Inserts, UNJ threads, selflocking, with self-broaching keys. In heat resisting nickel base alloy NI-P101HT (WASPALOY), silver plating
  • BS EN 4673-006:2010 Aerospace series. Inserts, UNJ threads, selflocking, with self-broaching keys. In heat resisting steel FE-PA2601 (A286), MoS2 coated
  • BS EN 6072:2010 Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing
  • BS EN ISO 6581:2010 Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
    Supersedes BS EN 12373-8:1999
  • BS EN ISO 6887-5:2010 Microbiology of food and animal feeding stuffs. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Specific rules for the preparation of milk and milk products
    Supersedes BS EN ISO 8261:2002
  • BS EN ISO 7376:August 2009 Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation
    Supersedes BS EN ISO 7376:2009 which is the implementation of EN ISO 7376:2009, April edition
  • BS EN ISO 8970:2010 Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
    Supersedes BS EN 28970:1991
  • BS EN ISO 8993:2010 Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method
    Supersedes BS EN 12373-18:2001
  • BS EN ISO 9239-1:2010 Reaction to fire tests for floorings. Determination of the burning behaviour using a radiant heat source
    Supersedes BS EN ISO 9239-1:2002
  • BS EN ISO 9614-1:2009 Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points
    Supersedes BS EN ISO 9614-1:1995
  • BS EN ISO 10215:2010 Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
    Supersedes BS EN 12373-14:2001
  • BS EN ISO 10781:2009 (CD-ROM) Electronic health record-system functional model, release 1.1
  • BS EN ISO 11201:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
    Supersedes BS EN ISO 11201:2009
  • BS EN ISO 11202:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
    Supersedes BS EN ISO 11202:2009
  • BS EN ISO 11204:2010 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
    Supersedes BS EN ISO 11204:2009
  • BS EN ISO 11681-1:2008 Machinery for forestry. Portable chain-saw safety requirements and testing. Chain-saws for forest service
    Supersedes BS EN ISO 11681-1:2004
  • BS EN ISO 11681-2:2008 Machinery for forestry. Portable chain-saw safety requirements and testing. Chain-saws for tree service
    Supersedes BS EN ISO 11681-2:2006
  • BS EN ISO 11876:2010 Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method
  • BS EN ISO 11990-2:2010 Lasers and laser-related equipment. Determination of laser resistance of tracheal tubes. Tracheal tube cuffs
  • BS EN 12199:2010 Resilient floor coverings. Specifications for homogeneous and heterogeneous relief rubber floor coverings
    Supersedes BS EN 12199:1998
  • BS EN 12350-8:2010 Testing fresh concrete. Self-compacting concrete. Slump-flow test
  • BS EN 12350-9:2010 Testing fresh concrete. Self-compacting concrete. V-funnel test
  • BS EN 12350-10:2010 Testing fresh concrete. Self-compacting concrete. L box test
  • BS EN 12350-11:2010 Testing fresh concrete. Self-compacting concrete. Sieve segregation test
  • BS EN 12350-12:2010 Testing fresh concrete. Self-compacting concrete. J-ring test
  • BS EN 12490:2010 Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood
    Supersedes BS EN 12490:1999
  • BS EN 12542:2010 LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3. Design and manufacture
    Supersedes BS EN 12542:2002 and BS EN 14075:2002
  • BS EN ISO 12567-1:2010 Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method. Complete windows and doors
    Supersedes BS EN ISO 12567-1:2000
  • BS EN 12697-47:2010 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the ash content of natural asphalts
  • BS EN 12735-1:2010 Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for piping systems
    Supersedes BS EN 12735-1:2001
  • BS EN 12735-2:2010 Copper and copper alloys. Seamless, round copper tubes for air conditioning and refrigeration. Tubes for equipment
    Supersedes BS EN 12735-2:2001
  • BS EN 13203-3:2010 Solar supported gas-fired domestic appliances producing hot water. Appliances not exceeding 70 kW heat input and 500 litres water storage capacity. Assessment of energy consumption
  • BS EN 13309:2010 Construction machinery. Electromagnetic compatibility of machines with internal power supply
    Supersedes BS EN 13309:2000
  • BS EN 13803-1:2010 Railway applications. Track. Track alignment design parameters. Track gauges 1435 mm and wider. Plain line
    Supersedes DD ENV 13803-1:2002
  • BS EN 13859-2:2010 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls
    Supersedes BS EN 13859-2:2004+A1:2008
  • BS EN 14064-1:2010 Thermal insulation products for buildings. Insitu formed loose-fill mineral wool (MW) products. Specification for the loose-fill products before installation
  • BS EN 14064-2:2010 Thermal insulation products for buildings. Insitu formed loose-fill mineral wool (MW) products. Specification for the installed products
  • BS EN 14139:2010 Ophthalmic optics. Specifications for ready-towear spectacles
    Supersedes BS EN 14139:2002
  • BS EN 14502-1:2010 Cranes. Equipment for the lifting of persons. Suspended baskets
    Supersedes BS EN 14502-1:2005
  • BS EN 14634:2010 Glass packaging. 26 H 180 crown finish. Dimensions
    Supersedes BS EN 14634:2006
  • BS EN 14701-4:2010 Characterization of sludges. Filtration properties. Determination of the drainability of flocculated sludges
  • BS EN 14938-2:2010 Copper and copper alloys. Determination of bismuth content. Flame atomic absorption spectrometric method (FAAS)
    Supersedes DD CEN/TS 14938-2:2006
  • BS EN 15023-3:2010 Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometric method (FAAS)
    Supersedes DD CEN/TS 15023-3:2006
  • BS EN 15025:2010 Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS)
    Supersedes DD CEN/TS 15025:2006
  • BS EN 15191:2009 Precast concrete products. Classification of glassfibre reinforced concrete performance
  • BS EN ISO 15302:2010 Animal and vegetable fats and oils. Determination of benzo[a]pyrene. Reversephase high performance liquid chromatography method
    Supersedes BS EN ISO 15302:2007
  • BS EN 15365:2010 Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature in a non-reactive environment. Determination of creep behaviour by the cold end method
  • BS EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products. Specification for bonded and loose-fill products before installation
  • BS EN 15599-2:2010 Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from expanded perlite (EP) products. Specification for the installed products
  • BS EN 15600-1:2010 Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Specification for bonded and loose-fill products before installation
  • BS EN 15600-2:2010 Thermal insulation products for building equipment and industrial installations. In-situ thermal insulation formed from exfoliated vermiculite (EV) products. Specification for the installed products
  • BS EN 15605:2010 Copper and copper alloys. Inductively coupled plasma optical emission spectrometry
  • BS EN 15836-1:2010 Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
  • BS EN 15836-2:2010 Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Reinforced membranes of nominal thickness equal to or greater than 1,5 mm
  • BS EN 15878:2010 Steel static storage systems. Terms and definitions
  • BS EN 15915:2010 Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS)
  • BS EN 15916-2:2010 Copper and copper alloys. Determination of tellurium content. Medium tellurium content. Flame atomic absorption spectrometric method (FAAS)
  • BS EN ISO 22868:2008 Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (Grade 2 accuracy)
    Supersedes BS EN ISO 22868:2006
  • BS EN ISO 23125:2010 Machine tools. Safety. Turning machines
    Supersedes BS EN 12415:2001, BS EN 12478:2001, BS EN 12840:2001 and BS EN 13788:2002
  • BS EN ISO 24534-1:2010 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Architecture
    Supersedes DD ISO/TS 24534-1:2007
  • BS EN ISO 24534-2:2010 Automatic vehicle and equipment identification. Electronic Registration Identification (ERI) for vehicles. Operational requirements
    Supersedes DD ISO/TS 24534-2:2007
  • BS EN ISO 24534-3:2010 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Vehicle data
    Supersedes DD CEN ISO/TS 24534-3:2008
  • BS EN ISO 24534-4:2010 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Secure communications using asymmetrical techniques
    Supersedes DD CEN ISO/TS 24534-4:2008
  • BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • BS EN ISO 26203-1:2010 Metallic materials. Tensile testing at high strain rates. Elastic-bar-type systems
  • BS EN ISO 26909:2010 Springs. Vocabulary
    Supersedes the dual numbered standard BS EN ISO 2162-3:1996, BS 308-1.19:1996
  • BS EN 50110-2:2010 Operation of electrical installations. National annexes
    Supersedes BS EN 50110-2:1997
  • BS EN 50160:2010 Voltage characteristics of electricity supplied by public electricity networks
    Supersedes BS EN 50160:2007
  • BS EN 50181:2010 Plug-in type bushings above 1 kV up to 52 Kv and from 250 A to 2,50 kA for equipment other than liquid filled transformers
    Supersedes BS EN 50181:1999
  • BS EN 50383:2010 Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz – 40 GHz)
    Supersedes BS EN 50383:2002
  • BS EN 50498:2010 Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles
  • BS EN 60146-1-1:2010 Semiconductor converters. General requirements and line commutated converters. Specification of basic requirements
    Supersedes BS EN 60146-1-1:1993
  • BS EN 60268-4:2010 Sound system equipment. Microphones
    Supersedes BS EN 60268-4:2004
  • BS EN 60335-2-11:2010 Household and similar electrical appliances. Safety. Particular requirements for tumble dryers
    Supersedes BS EN 60335-2-11:2003+A2:2006 which remains current
  • BS EN 60512-20-1:2010 Connectors for electronic equipment. Tests and measurements. Fire hazard tests. Test 20a. Flammability, needle-flame
    Supersedes BS 5772-9:1993 which remains current
  • BS EN 60512-20-3:2010 Connectors for electronic equipment. Tests and measurements. Fire hazard tests. Test 20c. Flammability, glow-wire
    Supersedes BS 5772-9:1993 which remains current
  • BS EN 60512-21-1:2010 Connectors for electronic equipment. Tests and measurements. R.F. resistance tests. Test 21a. R.F. shunt resistance
    Supersedes BS 5772-9:1993 which remains current
  • BS EN 60512-22-1:2010 Connectors for electronic equipment. Tests and measurements. Capacitance tests. Test 22a. Capacitance
    Supersedes BS 5772-9:1993 which remains current
  • BS EN 60603-7-3:2010 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
    Supersedes BS EN 60603-7-3:2009
  • BS EN 60603-7-4:2010 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    Supersedes BS EN 60603-7-4:2005
  • BS EN 60603-7-5:2010 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    Supersedes BS EN 60603-7-5:2009
  • BS EN 60666:2010 Detection and determination of specified additives in mineral insulating oils
    Supersedes BS 5984:1980
  • BS EN 60695-7-1:2010 Fire hazard testing. Toxicity of fire effluent. General guidance
    Supersedes BS EN 60695-7-1:2004
  • BS EN 60745-2-11:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws)
    Supersedes BS EN 60745-2-11:2003+A1:2009 which remains current
  • BS EN 61029-2-6:2010 Safety of transportable motor-operated electric tools. Particular requirements for diamond drills with water supply
  • BS EN 61029-2-10:2010 Safety of transportable motor-operated electric tools. Particular requirements for cutting-off grinders
  • BS EN 61076-3-118:2010 Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling
  • BS EN 61753-121-2:2010 Fibre optic interconnecting devices and passive components. Performance standards. Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C. Controlled environment
  • BS EN 61753-121-3:2010 Fibre optic interconnecting devices and passive components. Performance standard. Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U. Uncontrolled environment
  • BS EN 61937-12:2010 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the DRA formats
  • BS EN 62058-11:2010 Electricity metering equipment (A.C.). Acceptance inspection. General acceptance inspection methods
    Supersedes BS EN 60514:1995 and BS EN 61358:1996
  • BS EN 62058-21:2010 Electricity metering equipment (A.C.). Acceptance inspection. Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)
    Supersedes BS EN 60514:1995
  • BS EN 62058-31:2010 Electricity metering equipment (A.C.). Acceptance inspection. Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C)
    Supersedes BS EN 61358:1996
  • BS EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems. General Requirements
  • BS EN 62209-2:2010 Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures. Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
  • BS EN 62317-2:2010 Ferrite cores. Dimensions. Pot-cores for use in telecommunications, power supply, and filter applications
    Supersedes BS EN 60133:2001
  • BS EN 62418:2010 Semiconductor devices. Metallization stress void test
  • BS EN 62514:2010 Multimedia gateway in home networks. Guidelines
  • BS EN 62537:2010 Interface for loudspeakers with digital input signals based on IEC 60958

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 105-F02:2009 Textiles. Tests for colour fastness. Specification for cotton and viscose adjacent fabrics
  • BS ISO 105-F09:2009 Textiles. Tests for colour fastness. Specification for cotton rubbing cloth
  • BS ISO 113:2010 Rolling bearings. Plummer block housings. Boundary dimensions
    Supersedes BS ISO 113:1999
  • BS ISO 639-4:2010 Codes for the representation of names of languages. General principles of coding of the representation of names of languages and related entities, and application guidelines
  • BS ISO 813:2010 Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90ºC peel method
    Supersedes BS 903-A21.1:1997
  • BS ISO 1754:2010 Photography. Cameras using 35 mm film and roll film. Dimensions of picture sizes
    Supersedes BS ISO 1754:1998
  • BS ISO 3039:2010 Corrugated fibreboard. Determination of grammage of the component papers after separation
    BS ISO 4107:2010 Commercial vehicles. Wheelhub attachment dimensions
    Supersedes BS AU 50-2.2a:1984
  • BS ISO 4113:2010 Road vehicles. Calibration fluids for diesel injection equipment
  • BS ISO 4309:2010 Cranes. Wire ropes. Care and maintenance, inspection and discard
    Supersedes BS ISO 4309:2004+A1:2008
  • BS ISO 5667-22:2010 Water quality. Sampling. Guidance on the design and installation of groundwater monitoring points
  • BS ISO 6312:2010 Road vehicles. Brake linings. Shear test procedure for disc brake pad and drum brake shoe assemblies
  • BS ISO 8695:2010 Tools for pressing. Punches. Nomenclature and terminology
    Supersedes BS 7568-1:1992
  • BS ISO 9005:2007 Nuclear energy. Uranium dioxide powder and sintered pellets. Determination of oxygen/uranium atomic ratio by the amperometric method
  • BS ISO 9815:2010 Road vehicles. Passenger-car and trailer combinations. Lateral stability test
    Supersedes BS ISO 9815:2003
  • BS ISO 10276:2010 Nuclear energy. Fuel technology. Trunnions for packages used to transport radioactive material
  • BS ISO 10617:2010 Textiles. Standard data format for colorimetric communication. Textiles and related measurements
  • BS ISO 10649-1:2010 Cutter arbors with parallel key and tenon drive. General dimensions
  • BS ISO 10649-2:2010 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with hollow taper interface with flange contact surface
  • BS ISO 10649-3:2010 Cutter arbors with parallel key and tenon drive. Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
  • BS ISO 11231:2010 Space systems. Probabilistic risk assessment (PRA)
  • BS ISO 11323:2010 Iron ore and direct reduced iron. Vocabulary
    Supersedes BS ISO 11323:2002
  • BS ISO 12500-4:2009 (CD-ROM) Filters for compressed air. Methods of test. Water
  • BS ISO 12620:2009 Terminology and other language and content resources. Specification of data categories and management of a data category registry for language resources
    Supersedes BS ISO 12620:1999
  • BS ISO 13674-1:2010 Road vehicles. Test method for the quantification of on-centre handling. Weave test
    Supersedes BS ISO 13674-1:2003
  • BS ISO 13739:2010 (CD-ROM) Petroleum products. Procedures for transfer of bunkers to vessels
    Supersedes BS ISO/TR 13739:1998
  • BS ISO 14237:2010 Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly doped materials
    Supersedes BS ISO 14237:2000
  • BS ISO 15031-6:2010 Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Diagnostic trouble code definitions
    Supersedes BS ISO 15031-6:2005
  • BS ISO 15375:2010 Medical infusion bottles. Suspension devices for multiple use. Requirements and test methods
    Supersedes BS ISO 15375:2004
  • BS ISO 15856:2010 Space systems. Space environment. Simulation guidelines for radiation exposure of nonmetallic materials
  • BS ISO 15930-7:2010 Graphic technology. Prepress digital data exchange using PDF. Complete exchange of printing data (PDF/X-4) and partial exchange of printing data with external profile reference PDF/X-4p) using PDF 1.6
    Supersedes BS ISO 15930-7:2008
  • BS ISO 15930-8:2010 Graphic technology. Prepress digital data exchange using PDF. Partial exchange of printing data using PDF 1.6 (PDF/X-5)
    Supersedes BS ISO 15930-8:2008
  • BS ISO 18115-1:2010 Surface chemical analysis. Vocabulary. General terms and terms used in spectroscopy
    Supersedes BS ISO 18115:2001+A2:2007
  • BS ISO 18115-2:2010 Surface chemical analysis. Vocabulary. Terms used in scanning-probe microscopy
    Supersedes BS ISO 18115:2001+A2:2007
  • BS ISO/IEC 19785-4:2010 Information technology. Common Biometric Exchange Formats Framework. Security block format specifications
  • BS ISO 21338:2010 Water quality. Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test)
  • BS ISO 22538-6:2010 Space systems. Oxygen safety. Facility planning and implementation
  • BS ISO 24613:2008 Language resource management. Lexical markup framework (LMF)
  • BS ISO 25297-1:2010 Optics and photonics. Electronic exchange of optical data. NODIF information model
  • BS ISO 26142:2010 Hydrogen detection apparatus. Stationary applications
  • BS ISO 26802:2010 Nuclear facilities. Criteria for the design and the operation of containment and ventilation systems for nuclear reactors
  • BS ISO/HL7 27931:2009 (CD-ROM) Data exchange standards. Health level seven version 2.5. An application protocol for electronic data exchange in healthcare environments
  • BS ISO/HL7 27932:2009 (CD-ROM) Data exchange standards. HL7 clinical document architecture, release 2
  • BS ISO/HL7 27951:2009 (CD-ROM) Health informatics. Common terminology services, release 1
  • BS ISO 28017:2009 Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
  • BS ISO 29383:2010 Terminology policies. Development and implementation
  • BS IEC 62484:2010 Radiation protection instrumentation. Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material

Published documents

  • PD ISO/TR 11360:2010 Nanotechnologies. Methodology for the classification and categorization of nanomaterials
  • PD ISO/TR 12603:2010 Building construction machinery and equipment. Classification
    Supersedes DD 237:1996
  • PD CEN/TR 13714:2010 Characterization of sludges. Sludge management in relation to use or disposal
    Supersedes PD CR 13714:2001
  • PD CEN/TR 13910:2010 Packaging. Report on criteria and methodologies for life cycle analysis of packaging
  • PD ISO/TR 14742:2010 Financial services. Recommendations on cryptographic algorithms and their use
  • PD ISO/IEC TR 15026-1:2010 Systems and software engineering. Systems and software assurance. Concepts and vocabulary
    Supersedes BS ISO/IEC 15026:1998 which remains current
  • PD CEN/TR 15941:2010 Sustainability of construction works. Environmental product declarations. Methodology for selection and use of generic data
  • PD CEN/TR 16013-2:2010 Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring. Evaluation of airborne particle concentrations using optical particle counters
  • PD CEN/CLC TR 16103:2010 Energy management and energy efficiency. Glossary of terms
  • PD ISO/TR 21808:2009 Guidance on the selection, use, care and maintenance of personal protective equipment (PPE) designed to provide protection for firefighters
  • PD ISO/TR 24475:2010 Cosmetics. Good manufacturing practices. General training document
  • PD ISO/IEC TR 25060:2010 Systems and software engineering. Systems and software product quality requirements and evaluation (SQuaRE). Common industry format (CIF) for usability. General framework for usability-related information
  • PD ISO/TR 27507:2010 Plain bearings. Recommendations for automotive crankshaft bearing environments
  • PD CLC/TR 50173-99-2:2010 Information technology. Implementation of BCT applications using cabling in accordance with EN 50173-4
  • PD IEC/TR 62627-02:2010 Fibre optic interconnecting devices and passive components. Report of round robin test results on SC plug style fixed attenuators

Aerospace series

  • BS 2A 260-2A 265:2010 Aerospace series. Specification for pan and 100º countersunk slotted head screws with ISO metric screw threads
    Supersedes BS A 260; A 261 [...]:1976
  • BS A 400:2010 Specification for nuts, plain and slotted (unified hexagons and unified threads) for shear bolts for aircraft in corrosion-resisting steel

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 1722-2:2006 Fences. Specification for strained wire and wire mesh netting fences
    CORRIGENDUM 1
  • BS 1722-5:2006 Fences. Specification for close-boarded fences and wooden palisade fences
    CORRIGENDUM 1
  • BS 5930:1999+A2:2010 Code of practice for site investigations
    AMENDMENT 2
  • BS 6031:2009 Code of practice for earthworks
    CORRIGENDUM 1
  • BS EN 30-1-1:2008+A1:2010 Domestic cooking appliances burning gas. Safety. General
    AMENDMENT 1
  • BS EN 374-3:2003 Protective gloves against chemicals and microorganisms. Determination of resistance to permeation by chemicals
    CORRIGENDUM 1
  • BS EN 534:2006+A1:2010 Corrugated bitumen sheets. Product specification and test methods
    AMENDMENT 1
  • BS EN 659:2003+A1:2008 Protective gloves for firefighters
    CORRIGENDUM 1
  • BS EN 709:1997+A4:2009 Agricultural and forestry machinery. Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s). Safety
    AMENDMENT 4
  • BS EN 809:1998+A1:2009 Pumps and pump units for liquids. Common safety requirements
    CORRIGENDUM 3
  • BS EN 1010-2:2006+A1:2010 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Printing and varnishing machines including pre-press machinery
    AMENDMENT 1
  • BS EN 1247:2004+A1:2010 Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
    AMENDMENT 1
  • BS EN 1279-5:2005+A2:2010 Glass in building. Insulating glass units. Evaluation of conformity
    AMENDMENT 2
  • BS EN 1366-4:2006+A1:2010 Fire resistance tests for service installations. Linear joint seals
    AMENDMENT 1
  • BS EN 1808:1999+A1:2010 Safety requirements on suspended access equipment. Design calculations, stability criteria, construction. Tests
    AMENDMENT 1
  • BS EN 1991-1-4:2005 Eurocode 1. Actions on structures. General actions. Wind actions
    CORRIGENDUM 2
  • BS EN 1993-1-8:2005 Eurocode 3. Design of steel structures. Design of joints
    CORRIGENDUM 4
  • BS EN 1999-1-2:2007 Eurocode 9. Design of aluminium structures. Structural fire design
    CORRIGENDUM 3
  • BS EN 1999-1-4:2007 Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting
    CORRIGENDUM 1
  • BS EN 1999-1-5:2007 Eurocode 9. Design of aluminium structures. Shell structures
    CORRIGENDUM 1
  • BS EN ISO 5457:1999+A1:2010 Technical product documentation. Sizes and layout of drawing sheets
    AMENDMENT 1
  • BS EN ISO 10052:2004+A1:2010 Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey method
    AMENDMENT 1
  • BS EN 12158-1:2000+A1:2010 Builders' hoists for goods. Hoists with accessible platforms
    AMENDMENT 1
  • BS EN 12158-2:2000+A1:2010 Builders' hoists for goods. Inclined hoists with non-accessible load carrying devices
    AMENDMENT 1
  • BS EN 12245:2009 Transportable gas cylinders. Fully wrapped composite cylinders
    CORRIGENDUM 1
  • BS EN 12331:2003+A2:2010 Food processing machinery. Mincing machines. Safety and hygiene requirements
    AMENDMENT 2
  • BS EN 12581:2005+A1:2010 Coating plants. Machinery for dip coating and electrode position of organic liquid coating material. Safety requirements
    AMENDMENT 1
  • BS EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure. Safety requirements
    AMENDMENT 1
  • BS EN 12757-1:2005+A1:2010 Mixing machinery for coating materials. Safety requirements. Mixing machinery for use in vehicle refinishing
    AMENDMENT 1
  • BS EN 12984:2005+A1:2010 Food processing machinery. Portable and/or hand-guided machines and appliances with mechanically driven cutting tools. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13001-2:2004+A3:2009 Crane safety. General design. Load effects
    AMENDMENT 3
  • BS EN 13020:2004+A1:2010 Road surface treatment machines. Safety requirements
    AMENDMENT 1
  • BS EN 13022-1:2006+A1:2010 Glass in building. Structural sealant glazing. Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
    AMENDMENT 1
  • BS EN 13022-2:2006+A1:2010 Glass in building. Structural sealant glazing. Assembly rules
    AMENDMENT 1
  • BS EN 13060:2004+A2:2010 Small steam sterilizers
    AMENDMENT 2
  • BS EN 13094:2008 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
    CORRIGENDUM 2
  • BS EN 13121-3:2008+A1:2010 GRP tanks and vessels for use above ground. Design and workmanship
    AMENDMENT 1
  • BS EN 13245-2:2008 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications. PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
    CORRIGENDUM 2
  • BS EN 13445-1:2009 Unfired pressure vessels. General
    CORRIGENDUM 1
  • BS EN 13445-2:2009 Unfired pressure vessels. Materials
    CORRIGENDUM 1
  • BS EN 13445-3:2009 Unfired pressure vessels. Design
    CORRIGENDUM 1
  • BS EN 13445-4:2009 Unfired pressure vessels. Fabrication
    CORRIGENDUM 1
  • BS EN 13445-5:2009 Unfired pressure vessels. Inspection and testing
    CORRIGENDUM 1
  • BS EN 13445-6:2009 Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
    CORRIGENDUM 1
  • BS EN 13445-8:2009 Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys
    CORRIGENDUM 1
  • BS EN 13480-3:2002+A4:2010 Metallic industrial piping. Design and calculation
    AMENDMENT 4
  • BS EN 13534:2006+A1:2010 Food processing machinery. Curing injection machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13570:2005+A1:2010 Food processing machinery. Mixing machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13674-2:2006+A1:2010 Railway applications. Track. Rail. Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
    AMENDMENT 1
  • BS EN 13674-3:2006+A1:2010 Railway applications. Track. Rail. Check rails
    AMENDMENT 1
  • BS EN 13747:2005+A2:2010 Precast concrete products. Floor plates for floor systems
    AMENDMENT 2
  • BS EN 13870:2005+A1:2010 Food processing machinery. Chop cutting machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13871:2005+A1:2010 Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13885:2005+A1:2010 Food processing machinery. Clipping machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13898:2003+A1:2009 Machine tools. Safety. Sawing machines for cold metal
    CORRIGENDUM 1
  • BS EN 13941:2009+A1:2010 Design and installation of preinsulated bonded pipe systems for district heating
    AMENDMENT 1
  • BS EN 14070:2003+A1:2009 Safety of machine tools. Transfer and specialpurpose machines
    CORRIGENDUM 1
  • BS EN 14492-1:2006+A1:2009 Cranes. Power driven winches and hoists. Power driven winches
    AMENDMENT 1
  • BS EN 14492-2:2006+A1:2009 Cranes. Power driven winches and hoists. Power driven hoists
    AMENDMENT 1
  • BS EN 14516:2006+A1:2010 Baths for domestic purposes
    AMENDMENT 1
  • BS EN 14527:2006+A1:2010 Shower trays for domestic purposes
    AMENDMENT 1
  • BS EN 14730-1:2006+A1:2010 Railway applications. Track. Aluminothermic welding of rails. Approval of welding processes
    AMENDMENT 1
  • BS EN 14974:2006+A1:2010 Facilities for users of roller sports equipment. Safety requirements and test methods
    AMENDMENT 1
  • BS EN 14975:2006+A1:2010 Loft ladders. Requirements, marking and testing
    AMENDMENT 1
  • BS EN 15368:2008+A1:2010 Hydraulic binder for non-structural applications. Definition, specifications and conformity criteria
    AMENDMENT 1
  • BS EN 15434:2006+A1:2010 Glass in building. Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
    AMENDMENT 1
  • BS EN 50124-2:2001 Railway applications. Insulation coordination. Overvoltages and related protection
    CORRIGENDUM 1
  • BS EN 50125-1:1999 Railway applications. Environmental conditions for equipment. Equipment on board rolling stock
    CORRIGENDUM 1
  • BS EN 50125-2:2002 Railway applications. Environmental conditions for equipment. Fixed electrical installations
    CORRIGENDUM 1
  • BS EN 50125-3:2003 Railway applications. Environmental conditions for equipment. Equipment for signalling and telecommunications
    CORRIGENDUM 1
  • BS EN 50128:2001 Railway applications. Communications, signalling and processing systems. Software for railway control and protection systems
    CORRIGENDUM 1
  • BS EN 50151:2003 Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators
    CORRIGENDUM 1
  • BS EN 50159-1:2001 Railway applications. Communication, signaling and processing systems. Safety-related communication in closed transmission systems
    CORRIGENDUM 1
  • BS EN 50159-2:2001 Railway applications. Communication, signaling and processing systems. Safety related communication in open transmission systems
    CORRIGENDUM 1
  • BS EN 50163:2004+A1:2007 Railway applications. Supply voltages of traction systems
    CORRIGENDUM 1
  • BS EN 50206-1:1998 Railway applications. Rolling stock. Pantographs. Characteristics and tests. Pantographs for main line vehicles
    CORRIGENDUM 1
  • BS EN 50238:2003 Railway applications. Compatibility between rolling stock and train detection systems
    CORRIGENDUM 1
  • BS EN 50290-2-27:2002+A1:2007 Communication cables. Common design rules and construction. Halogen free flame retardant thermoplastic sheathing compounds
    CORRIGENDUM 1
  • BS EN 50317:2002+A2:2007 Railway applications. Current collection systems. Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
    CORRIGENDUM 1
  • BS EN 50388:2005 Railway applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability
    CORRIGENDUM 1
  • BS EN 55011:2009+A1:2010 Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement
    AMENDMENT 1
  • BS EN 60745-2-19:2009+A1:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for jointers
    AMENDMENT 1
  • BS EN 60709:2010 Nuclear power plants. Instrumentation and control systems important to safety. Separation
    CORRIGENDUM 1
  • BS EN 60730-2-11:2008 Automatic electrical controls for household and similar use. Particular requirements for energy regulators
    CORRIGENDUM 2
  • BS EN 61162-3:2008+A1:2010 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Serial data instrument network
    AMENDMENT 1
  • BS EN 61300-3-35:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Fibre optic connector endface visual and automated inspection
    CORRIGENDUM 1
  • BS EN ISO 1182:2010 Reaction to fire tests for products. Noncombustibility test
    CORRIGENDUM 1
  • BS EN ISO 9100-2:2005 Glass containers. Vacuum lug finishes. 33 medium
    CORRIGENDUM 1
  • BS EN ISO 9100-3:2005 Glass containers. Vacuum lug finishes. 38 regular
    CORRIGENDUM 1
  • BS EN ISO 9100-4:2005 Glass containers. Vacuum lug finishes. 38 medium
    CORRIGENDUM 1
  • BS EN ISO 11161:2007+A1:2010 Safety of machinery. Integrated manufacturing systems. Basic requirements
    CORRIGENDUM 1
  • BS EN ISO 12402-2:2006+A1:2010 Personal flotation devices. Lifejackets, performance level 275. Safety requirements
    AMENDMENT 1
  • BS EN ISO 12402-3:2006+A1:2010 Personal flotation devices. Lifejackets, performance level 150. Safety requirements
    AMENDMENT 1
  • BS EN ISO 12402-4:2006+A1:2010 Personal flotation devices. Lifejackets, performance level 100. Safety requirements
    AMENDMENT 1
  • BS EN ISO 12402-5:2006+A1:2010 Personal flotation devices. Buoyancy aids (level 50). Safety requirements
    AMENDMENT 1
  • BS EN ISO 13849-1:2008 Safety of machinery. Safety-related parts of control systems. General principles for design
    CORRIGENDUM 1
  • BS EN ISO 14063:2010 Environmental management. Environmental communication. Guidelines and examples
    CORRIGENDUM 1
  • BS EN ISO 14122-1:2001+A1:2010 Safety of machinery. Permanent means of access to machinery. Choice of a fixed means of access between two levels
    AMENDMENT 1
  • BS EN ISO 14122-2:2001+A1:2010 Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
    AMENDMENT 1
  • BS EN ISO 14122-3:2001+A1:2010 Safety of machinery. Permanent means of access to machinery. Stairways, stepladders and guard-rails
    AMENDMENT 1
  • BS EN ISO 14122-4:2004+A1:2010 Safety of machinery. Permanent means of access to machinery. Fixed ladders
    AMENDMENT 1
  • BS EN ISO 14557:2002+A1:2007 Fire-fighting hoses. Rubber and plastics suction hoses and hose assemblies
    AMENDMENT 1
  • BS EN ISO 20361:2009 Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
    CORRIGENDUM 1
  • BS EN ISO 21150:2009 Cosmetics. Microbiology. Detection of Escherichia coli
    CORRIGENDUM 1
  • BS EN ISO 22717:2009 Cosmetics. Microbiology. Detection of Pseudomonas aeruginosa
    CORRIGENDUM 1
  • BS EN ISO 22718:2009 Cosmetics. Microbiology. Detection of Staphylococcus aureus
    CORRIGENDUM 1
  • BS ISO 2781:2008+A1:2010 Rubber, vulcanized or thermoplastic. Determination of density
    AMENDMENT 1
  • BS ISO 3500:2005+A1:2010 Gas cylinders. Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
    AMENDMENT 1
  • BS ISO 3767-1:1998+A1:2008 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Common symbols
    AMENDMENT 1
  • BS ISO 4395:2009 Fluid power systems and components. Cylinder piston rod end types and dimensions
    CORRIGENDUM 1
  • BS ISO 5008:2002 Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator
    CORRIGENDUM 1
  • BS ISO 8434-6:2009 Metallic tube connections for fluid power and general use. 60º cone connectors with or without O-ring
    CORRIGENDUM 1
  • BS ISO 8443:2010 Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions
    CORRIGENDUM 1
  • BS ISO 9462:2006+A1:2009 Alpine ski bindings. Requirements and test methods
    AMENDMENT 1
  • BS ISO 17331:2004+A1:2010 Surface chemical analysis. Chemical methods for the collection of elements from the surface of ilicon-wafer working reference materials and heir determination by total-reflection X-ray fluorescence (TXRF) spectroscopy
    AMENDMENT 1
  • BS ISO/IEC 9798-6:2005 Information technology. Security techniques. Entity authentication. Mechanisms using manual data transfer
    CORRIGENDUM 1
  • BS ISO/IEC 11770-2:2008 Information technology. Security techniques. Key management. Mechanisms using symmetric techniques
    CORRIGENDUM 1
  • BS ISO/IEC 11770-3:2008 Information technology. Security techniques. Key management. Mechanisms using asymmetric techniques
    CORRIGENDUM 1
  • BS ISO/IEC 11770-4:2006 Information technology. Security techniques. Key management. Mechanisms based on weak secrets
    CORRIGENDUM 1
  • BS ISO/IEC 14888-3:2006+A1:2010 Information technology. Security techniques. Digital signatures with appendix. Discrete logarithm based mechanisms
    AMENDMENT 1
  • BS ISO/IEC 19784-1:2006+A3:2010 Information technology. Biometric application programming interface. BioAPI specification
    AMENDMENT 3
  • DD IEC/TS 61000-3-5:2009 Electromagnetic compatibility (EMC). Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
    CORRIGENDUM 2
  • PD CEN/TR 13930:2009 Rotodynamic pumps. Design of pump intakes. Recommendations for installation of pumps
    CORRIGENDUM 1
  • PD CEN/TR 13931:2009 Rotodynamic pumps. Forces and moments on flanges. Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps
    CORRIGENDUM 1

British Standards declared obsolescent

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

  • BS 4220-1:1974 Methods of test for seats on agricultural wheeled tractors. Tests on artificial track
  • BS 5827:1979 Specification for mobile, manually operated patient-lifting devices
  • BS 6735:1987 Specification for reach volumes for the location of controls on agricultural tractors and machinery
  • BS 7436:1996 Specification for data transfer between agricultural tractors and attached machinery (data bus protocol)

British Standards withdrawn

  • BS 903-A21.1:1997 Physical testing of rubber. Determination of rubber to metal bond strength. Adhesion to rigid substrates. 90º peel method
    Superseded by BS ISO 813:2010
  • BS 4368-4:1984 Metallic tube connectors for fluid power and general use. Specification for type test requirements
    This standard has been withdrawn following the systematic review which concluded the standard is no longer relevant
  • BS 5200:1997 Specification for dimensions of hydraulic connectors and adaptors
    This standard has been withdrawn following the systematic review which concluded the standard is no longer relevant
  • BS 5984:1980 Method for detection and determination of specified anti-oxidant additives in insulating oils
    Superseded by BS EN 60666:2010
  • BS 7568-1:1992 Press tools. Punches. Nomenclature and terminology
    Superseded by BS ISO 8695:2010
  • DD 237:1996 Building construction machinery and equipment. Classification
    Superseded by PD ISO/TR 12603:2010
  • BS EN 1911-1:1998 Stationary source emissions. Manual method of determination of HCI. Sampling of gases
    Superseded by BS EN 1911:2010
  • BS EN 1911-2:1998 Stationary source emissions. Manual method of determination of HCI. Gaseous compounds absorption
    Superseded by BS EN 1911:2010
  • BS EN 1911-3:1998 Stationary source emissions. Manual method of determination of HCI. Absorption solutions analysis and calculation
    Superseded by BS EN 1911:2010
  • BS EN ISO 2162-3:1996 (BS 308-1.19:1996) Technical product documentation. Springs. Vocabulary
    Superseded by BS EN ISO 26909:2010
  • BS EN ISO 8261:2002 Milk and milk products. General guidance for the preparation of test samples, initial suspensions and decimal dilutions for microbiological examination
    Superseded by BS EN ISO 6887-5:2010
  • BS EN 12373-5:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
    Superseded by BS EN ISO 2931:2010
  • BS EN 12373-8:1999 Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
    Superseded by BS EN ISO 6581:2010
  • BS EN 12373-14:2001 Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
    Superseded by BS EN ISO 10215:2010
  • BS EN 12373-16:2001 Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
    Superseded by BS EN ISO 2085:2010
  • BS EN 12373-18:2001 Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method
    Superseded by BS EN ISO 8993:2010
  • BS EN 12415:2001 Safety of machine tools. Small numerically controlled turning machines and turning centres
    Superseded by BS EN ISO 23125:2010
  • BS EN 12478:2001 Safety of machine tools. Large numerically controlled turning machines and turning centres
    Superseded by BS EN ISO 23125:2010
  • BS EN 12840:2001 Safety of machine tools. Manually controlled turning machines with or without automatic control
    Superseded by BS EN ISO 23125:2010
  • BS EN 13788:2002 Machine tools. Safety. Multi-spindle automatic turning machines
    Superseded by BS EN ISO 23125:2010
  • DD ENV 13803-1:2002 Railway applications. Track alignment design parameters. Track gauges 1435 mm and wider. Plain line
    Superseded by BS EN 13803-1:2010
  • BS EN 14075:2002 Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground. Design and manufacture
    Superseded by BS EN 12542:2010
  • DD CEN/TS 14938-2:2006 Copper and copper alloys. Determination of bismuth content. FAAS method
    Superseded by BS EN 14938-2:2010
  • DD CEN/TS 15023-3:2006 Copper and copper alloys. Determination of nickel content. Flame atomic absorption spectrometry method (FAAS)
    Superseded by BS EN 15023-3:2010
  • DD CEN/TS 15025:2006 Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometry method (FAAS)
    Superseded by BS EN 15025:2010
  • DD CEN ISO/TS 24534-3:2008 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Vehicle data
    Superseded by BS EN ISO 24534-3:2010
  • DD CEN ISO/TS 24534-4:2008 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Secure communications using asymmetrical techniques
    Superseded by BS EN ISO 24534-4:2010
  • BS EN 28970:1991 Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density
    Superseded by BS EN ISO 8970:2010
  • BS EN 50242:1999 Electric dishwashers for household use. Test methods for measuring the performance
    Superseded by the dual numbered standard BS EN 50242:2008, BS EN 60436:2008
  • BS EN 55012:2002 Vehicles, boats and internal combustion engine driven devices. Radio disturbance characteristics. Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
    Superseded by BS EN 55012:2007+A1:2009
  • BS EN 60133:2001 Dimensions of pot-cores made of magnetic oxides and associated parts
    Superseded by BS EN 62317-2:2010
  • BS EN 60146-1-1:1993 Semiconductor convertors. General requirements and line commutated convertors. Specifications of basic requirements
    Superseded by BS EN 50328:2003 and BS EN 60146-1-1:2010
  • BS EN 60514:1995 Acceptance inspection of class 2 alternating current Watt hour meters
    Superseded by BS EN 62058-11:2010 and BS EN 62058-21:2010
  • BS EN 60603-7-4:2005 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    Superseded by BS EN 60512-26-100:2008 and BS EN 60603-7-4:2010
  • BS EN 60730-2-3:1992 Automatic electrical controls for household and similar use. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
    Superseded by BS EN 60730-2-3:2007
  • BS EN 60730-2-4:1993 Specification for automatic electrical controls for household and similar use. Particular requirements. Thermal motor protectors for motor-compressors of hermetic and semi hermetic type
    Superseded by BS EN 60730-2-4:2007
  • BS EN 60730-2-10:1995 Specification for automatic electrical controls for household and similar use. Particular requirements. Motor starting relays
    Superseded by BS EN 60730-2-10:2007
  • BS EN 61358:1996 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
    Superseded by BS EN 62058-11:2010 and BS EN 62058-31:2010
  • BS ISO 18115:2001+A2:2007 Surface chemical analysis. Vocabulary
    Superseded by BS ISO 18115-1:2010 and BS ISO 18115-2:2010
  • DD ISO/TS 24534-1:2007 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Architecture
    Superseded by BS EN ISO 24534-1:2010
  • DD ISO/TS 24534-2:2007 Automatic vehicle and equipment identification. Electronic registration identification (ERI) for vehicles. Operational requirements
    Superseded by BS EN ISO 24534-2:2010
  • BS AU 50-2.2a:1984 Tyres and wheels. Wheels and rims. Specification for dimensions of wheel naves and hub centres for commercial vehicles
    Superseded by BS ISO 4107:2010

Published in international.