BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 5864:2010 Installation and maintenance of gas-fired ducted air heaters of rated heat input not exceeding 70 kW net (2nd and 3rd family gases). Specification
    Supersedes BS 5864:2004
  • BS 6465-4:2010 Sanitary installations. Code of practice for the provision of public toilets
  • BS 8006-1:2010 Code of practice for strengthened/reinforced soils and other fills
    Supersedes BS 8006:1995 which remains current
  • BS 8465:2010 Hydraulic fluid power. Monitoring the level of particulate contamination. Comparison membrane technique
  • BS 8536:2010 Facility management briefing. Code of practice

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 545:2010 Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
    Supersedes BS EN 545:2006
  • BS EN 1012-1:2010 Compressors and vacuum pumps. Safety requirements. Air compressors
    Supersedes BS 6244:1982 and BS EN 1012-1:1997
  • BS EN 1865-1:2010 Patient handling equipment used in road ambulances. Specification for general stretcher systems and patient handling equipment
    Supersedes BS EN 1865:2000 which remains current
  • BS EN ISO 2307:2010 Fibre ropes. Determination of certain physical and mechanical properties
    Supersedes BS EN ISO 2307:2005
  • BS EN ISO 2376:2010 Anodizing of aluminium and its alloys. Determination of electric breakdown potential
    Supersedes BS EN 12373-17:2001
  • BS EN ISO 3741:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for reverberation test rooms
    Supersedes BS EN ISO 3741:2009
  • BS EN ISO 3743-1:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fields. Comparison method for a hard-walled test room
    Supersedes BS EN ISO 3743-1:2009
  • BS EN 4655:2010 Aerospace series. Steel FEPM1506 (X1CrNiMoAlTi12-10-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bars. a or D µ 200 mm. Rm ? 1400 MPa
  • BS EN 4700-001:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Plate, sheet and strip
  • BS EN 4700-003:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Tube
  • BS EN 4700-004:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Wire
  • BS EN ISO 8292-1:2010 Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMR. Direct method
    Supersedes the dual numbered standard BS EN ISO 8292:1995, BS 684-2.22:1992
  • BS EN ISO 8292-2:2010 Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMR. Indirect method
    Supersedes the dual numbered standard BS EN ISO 8292:1995, BS 684-2.22:1992
  • BS EN ISO 9187-1:2010 Injection equipment for medical use. Ampoules for injectables
    Supersedes BS EN ISO 9187-1:2008
  • BS EN ISO 10873:2010 Dentistry. Denture adhesives
  • BS EN ISO 10993-10:2010 Biological evaluation of medical devices. Tests for irritation and skin sensitization
    Supersedes BS EN ISO 10993-10:2009
  • BS EN ISO 11148-3:2010 Hand-held non-electric power tools. Safety requirements. Drills and tappers
    Supersedes BS EN 792-3:2000+A1:2008
  • BS EN ISO 11148-6:2010 Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners
    Supersedes BS EN 792-6:2000+A1:2008
  • BS EN 12697-44:2010 Bituminous mixtures. Test methods for hot mix asphalt. Crack propagation by semi-circular bending test
  • BS EN ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
  • BS EN 13148:2010 Copper and copper alloys. Hot-dip tinned strip
    Supersedes BS EN 13148:2001
  • BS EN 13285:2010 Unbound mixtures. Specifications
    Supersedes BS EN 13285:2003
  • BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
    Supersedes BS EN 13286-2:2004
  • BS EN 13358:2010 (BS 2000-525:2010) Bitumen and bituminous binders. Determination of the distillation characteristics of cut-back and fluxed bituminous binders made with mineral fluxes
    Supersedes the dual numbered standard BS EN 13358:2004, BS 2000-525:2004
  • BS EN 13398:2010 (BS 2000-516:2010) Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen
    Supersedes the dual numbered standard BS EN 13398:2003, BS 2000-516:2003
  • BS EN 13399:2010 (BS 2000-517:2010) Bitumen and bituminous binders. Determination of storage stability of modified bitumen
    Supersedes the dual numbered standard BS EN 13399:2003, BS 2000-517:2003
  • BS EN 13587:2010 (BS 2000-519:2010) Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
    Supersedes the dual numbered standard BS EN 13587:2003, BS 2000-519:2003
  • BS EN 13623:2010 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems. Test method and requirements (phase 2, step 1)
  • BS EN 13632:2010 (BS 2000-518:2010) Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen
    Supersedes the dual numbered standard BS EN 13632:2003, BS 2000-518:2003
  • BS EN 13702:2010 (BS 2000-513:2010) Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen by cone and plate method
    Supersedes the dual numbered standard BS EN 13702-1:2003, BS 2000-513:2003
  • BS EN 13823:2010 Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
    Supersedes BS EN 13823:2002
  • BS EN ISO 14171:2010 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
    Supersedes BS EN 756:2004
  • BS EN 15643-1:2010 Sustainability of construction works. Sustainability assessment of buildings. General framework
  • BS EN 15795:2010 Products used for treatment of water intended for human consumption. Natural unexpanded aluminosilicates
  • BS EN 15806:2010 Railway applications. Braking. Static brake testing
  • BS EN 15821:2010 Multi-firing sauna stoves fired by natural wood logs. Requirements and test methods
  • BS EN 15886:2010 Conservation of cultural property. Test methods. Colour measurement of surfaces
  • BS EN 15890:2010 Foodstuffs. Determination of patulin in fruit juice and fruit based puree for infants and young children. HPLC method with liquid/liquid partition cleanup and solid phase extraction and UV detection
  • BS EN 15891:2010 Foodstuffs. Determination of deoxynivalenol in cereals, cereal products and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and UV detection
  • BS EN 15907:2010 Film identification. Enhancing interoperability of metadata. Element sets and structures
  • BS EN 15927:2010 Services offered by hearing aid professionals
  • BS EN 15928:2010 Fertilizers. Determination of the fineness of grinding (dry procedure)
  • BS EN 15938:2010 (BS 2000-586:2010) Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
  • BS EN 15947-1:2010 Pyrotechnic articles. Fireworks, Categories 1, 2, and 3. Terminology
    Supersedes BS EN 14035-1:2003 which remains current
  • BS EN 15947-2:2010 Pyrotechnic articles. Fireworks, Categories 1, 2, and 3. Categories and types of firework
    Supersedes BS EN 14035-2:2003 which remains current
  • BS EN 15947-3:2010 Pyrotechnic articles. Fireworks, Categories 1, 2, and 3. Minimum labelling requirements
    Supersedes BS EN 14035 Parts 5 to 7, 15, 19, 22 to 25, 27 to 29, 34 to 36 and 38 which remain current
  • BS EN 15947-4:2010 Pyrotechnic articles. Fireworks, Categories 1, 2 and 3. Test methods
    Supersedes BS EN 14035 Parts 5 to 7, 15, 19, 22 to 25, 27 to 29, 34 to 36 and 38 which remain current
  • BS EN 15947-5:2010 Pyrotechnic articles. Fireworks, Categories 1, 2, and 3. Requirements for construction and performance
    Supersedes BS EN 14035 Parts 5 to 7, 15, 19, 22 to 25, 27 to 29, 34 to 36 and 38 which remain current
  • BS EN 15950:2010 Fertilizers. Determination of N-(1,2- dicarboxyethyl)-D, L-aspartic acid (Iminodisuccinic acid, IDHA) using highperformance liquid chromatography (HPLC)
  • BS EN ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
    Supersedes BS EN ISO 20685:2005
  • BS EN ISO 24034:2010 Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification
    Supersedes BS EN ISO 24034:2005+A1:2008
  • BS EN ISO 29701:2010 Nanotechnologies. Endotoxin test on nanomaterial samples for in vitro systems. Limulus amebocyte lysate (LAL) test
  • BS EN 50159:2010 Railway applications. Communication, signaling and processing systems. Safety-related communication in transmission systems
    Supersedes BS EN 50159-1:2001 and BS EN 50159-2:2001
  • BS EN 50180:2010 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers
    Supersedes BS EN 50180:1999
  • BS EN 60079-25:2010 Explosive atmospheres. Intrinsically safe electrical systems
    Supersedes BS EN 60079-25:2004
  • BS HD 60269-2:2010 (BS 88-2:2010) Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to J
    Supersedes BS 88-2:2007
  • BS HD 60269-3:2010 (BS 88-3:2010) Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Examples of standardized systems of fuses A to F
    Supersedes BS 88-3:2007
  • BS EN 60384-26-1:2010 Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte. Assessment level EZ
  • BS EN 60384-26:2010 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte
  • BS EN 60512-8-1:2010 Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8a. Static load, transverse
    Supersedes BS 5772-5:1993 which remains current
  • BS EN 60512-23-2:2010 Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23b. Suppression characteristics of integral filters
    Supersedes BS 5772-9:1993 which remains current
  • BS EN 60598-2-20:2010 Luminaires. Particular requirements. Lighting chains
    Supersedes BS EN 60598-2-20:1998 which remains current
  • BS EN 60601-2-33:2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
    Supersedes BS EN 60601-2-33:2002+A2:2008 which remains current
  • BS EN 60603-7-7:2010 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
    Supersedes BS EN 60603-7-7:2006
  • BS EN 60603-7-71:2010 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1000 MHz
  • BS EN 60793-1-31:2010 Optical fibres. Measurement methods and test procedures. Tensile strength
    Supersedes BS EN 60793-1-31:2002
  • BS EN 60939-1:2010 Passive filter units for electromagnetic interference suppression. Generic specification
    Supersedes BS EN 60939-1:2005
  • BS EN 60974-11:2010 Arc welding equipment. Electrode holders
    Supersedes BS EN 60974-11:2004
  • BS EN 61076-3-115:2010 Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 12 related to IEC 61076-3-106. Push-pull type
  • BS EN 61158-2:2010 Industrial communication networks. Fieldbus specifications. Physical layer specification and service definition
    Supersedes BS EN 61158-2:2008
  • BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
    Supersedes BS EN 61373:1999
  • BS EN 61386-24:2010 Conduit systems for cable management. Particular requirements. Conduit systems buried underground
    Supersedes BS EN 50086-2-4:1994
  • BS EN 61400-24:2010 Wind turbines. Lightning protection
    Supersedes PD IEC/TR 61400-24:2002
  • BS EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for bells and chimes
    Supersedes BS EN 61558-2-8:1999
  • BS EN 61666:2010 Industrial systems, installations and equipment and industrial products. Identification of terminals within a system
    Supersedes BS EN 61666:1997
  • BS EN 61968-11:2010 Application integration at electric utilities. System interfaces for distribution management. Common information model (CIM) extensions for distribution
  • BS EN 61975:2010 High-voltage direct current (HVDC) installations. System tests
  • BS EN 62258-1:2010 Semiconductor die products. Procurement and use
    Supersedes BS EN 62258-1:2005
  • BS EN 62541-3:2010 OPC unified architecture. Address space model
  • BS EN 62614:2010 Fibre optics. Launch condition requirements for measuring multimode attenuation
  • BS EN 80601-2-30:2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
    Supersedes BS EN 60601-2-30:2000 which remains current

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 34-1:2010 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
    Supersedes BS ISO 34-1:2004
  • BS ISO 562:2010 Hard coal and coke. Determination of volatile matter
    Supersedes BS 1016-104.3:1998
  • BS ISO 687:2010 Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
    Supersedes BS ISO 687:2004
  • BS ISO 1171:2010 Solid mineral fuels. Determination of ash
    Supersedes BS 1016-104.4:1998
  • BS ISO 3400:1997+A1:2009 Cigarettes. Determination of alkaloids in smoke condensates. Spectrometric method
  • BS ISO 3632-2:2010 Spices. Saffron (Crocus sativus L.). Test methods
    Supersedes DD ISO/TS 3632-2:2003
  • BS ISO 4647:2010 Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test
    Supersedes BS 903-A48:1984
  • BS ISO 4649:2010 Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
    Supersedes BS ISO 4649:2002
  • BS ISO 4666-1:2010 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Basic principles
    Supersedes BS 903-A49:1984
  • BS ISO 4666-3:2010 Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Compression flexometer (constant-strain type)
    Supersedes BS 903-A50:1984
  • BS ISO 6472:2010 Rubber compounding ingredients. Symbols and abbreviated terms
    Supersedes BS ISO 6472:2004
  • BS ISO 7135:2009 Earth-moving machinery. Hydraulic excavators. Terminology and commercial specifications
    Supersedes BS 6914-8:1993
  • BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
    Supersedes BS ISO 7619-1:2004+A1:2008
  • BS ISO 7619-2:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
    Supersedes BS ISO 7619-2:2004
  • BS ISO 10110-8:2010 Optics and photonics. Preparation of drawings for optical elements and systems. Surface texture; roughness and waviness
    Supersedes BS ISO 10110-8:1997
  • BS ISO 10295-2:2009 Fire tests for building elements and components. Fire testing of service installations. Linear joint (gap) seals
  • BS ISO 10332:2010 Non-destructive testing of steel tubes. Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
  • BS ISO/IEC 10373-3:2010 Identification cards. Test methods. Integrated circuit cards with contacts and related interface devices
    Supersedes BS ISO/IEC 10373-3:2001
  • BS ISO 10537:2010 Space data and information transfer systems. Encapsulation service
  • BS ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
  • BS ISO 11005:2010 Technical product documentation. Use of main documents
  • BS ISO 11476:2010 Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions)
    Supersedes BS ISO 11476:2000
  • BS ISO 11794:2010 Copper, lead, zinc and nickel concentrates. Sampling of slurries
  • BS ISO 11839:2010 Machinery for forestry. Glazing and panel materials used in operator enclosures for protection against thrown sawteeth. Test method an performance criteria
  • BS ISO 12273:2010 Aerospace. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
    Supersedes BS A 320:1997
  • BS ISO 13007-1:2010 Ceramic tiles. Grouts and adhesives. Terms, definitions and specifications for adhesives
  • BS ISO 13007-2:2010 Ceramic tiles. Grouts and adhesives. Test methods for adhesives
  • BS ISO 13007-3:2010 Ceramic tiles. Grouts and adhesives. Terms, definitions and specifications for grouts
  • BS ISO 13007-4:2010 Ceramic tiles. Grouts and adhesives. Test methods for grouts
  • BS ISO 13526:2010 Space data and information transfer systems. Tracking data message
  • BS ISO 13537:2010 Space data and information transfer systems. Reference architecture for space data systems
  • BS ISO 13541:2010 Space data and information transfer systems. Attitude data messages
  • BS ISO 13956:2010 Plastics pipes and fittings. Decohesion test of polyethylene (PE) saddle fusion joints. Evaluation of ductility of fusion joint interface by tear test
  • BS ISO 15143-1:2010 Earth-moving machinery and mobile road construction machinery. Worksite data exchange. System architecture
  • BS ISO 15143-2:2010 Earth-moving machinery and mobile road construction machinery. Worksite data exchange. Data dictionary
  • BS ISO 15527:2010 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
    Supersedes BS ISO 15527:2007
  • BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
    Supersedes BS ISO 15529:2007
  • BS ISO 16269-4:2010 Statistical interpretation of data. Detection and treatment of outliers
  • BS ISO 17246:2010 Coal. Proximate analysis
    Supersedes BS ISO 17246:2005
  • BS ISO 19143:2010 Geographic information. Filter encoding
  • BS ISO 22369-2:2010 Crop protection equipment. Drift classification of spraying equipment. Classification of field crop sprayers by field measurements
  • BS ISO 22647:2010 Space data and information transfer systems. Space link identifiers
    Supersedes BS ISO 22647:2006
  • BS ISO 26000:2010 Guidance on social responsibility
  • BS ISO 26062:2010 Nuclear technology. Nuclear fuels. Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry
  • BS ISO 26322-2:2010 Tractors for agriculture and forestry. Safety. Narrow-track and small tractors
  • BS ISO 26872:2010 Space systems. Disposal of satellites operating at geosynchronous altitude
  • BS ISO 28218:2010 Radiation protection. Performance criteria for radiobioassay
  • BS ISO 28279:2010 Sintered metal materials. Determination of the level of cleanliness of powder-metallurgy parts
  • BS ISO 28721-4:2010 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
  • BS ISO 29541:2010 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen content. Instrumental method
    Supersedes DD ISO/TS 12902:2002
  • BS IEC 60532:2010 Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
    Supersedes BS IEC 60532:1992

Published documents

  • PD 6531:2010 Queries and interpretations on BS 5839-1
    Supersedes PD 6531:1997
  • PD 6699-3:2010 Nanotechnologies. Guide to assessing airborne exposure in occupational settings relevant to nanomaterials
  • PD ISO/TR 11769:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Data retention for law enforcement
  • PD CEN/TR 15404:2010 Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures
    Supersedes DD CEN/TS 15404:2006
  • PD CEN/TR 16041:2010 Bicycles. Replies to requests for interpretation of EN 14764
  • PD CEN/TR 16042:2010 Bicycles. Replies to requests for interpretation of EN 14765
  • PD CEN/TR 16043:2010 Bicycles. Replies to requests for interpretation of EN 14766
  • PD CEN/TR 16044:2010 Bicycles. Replies to requests for interpretation of EN 14781
  • PD ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
  • PD ISO/IEC TR 24774:2010 Systems and software engineering. Life cycle management. Guidelines for process description
    Supersedes PD ISO/IEC TR 24774:2007
  • PD CLC/TR 62541-2:2010 OPC unified architecture. Security model
  • PD IEC/TR 62581:2010 Electrical steel. Methods of measurement of the magnetostriction characteristics by means of single sheet and Epstein test specimens
  • PD IEC/TR 62662:2010 Guidance for production, testing and diagnostics of polymer insulators with respect to brittle fracture of core materials

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 5502-50:1993+A2:2010 Buildings and structures for agriculture. Code of practice for design, construction and use of storage tanks and reception pits for livestock slurry
    AMENDMENT 2
  • BS 8204-6:2008+A1:2010 Screeds, bases and in situ floorings. Synthetic resin floorings. Code of practice
    AMENDMENT 1
  • BS 8488:2009+A1:2010 Prefabricated wiring systems intended for permanent connection in fixed installations. Specification
    AMENDMENT 1
  • BS EN 1997-2:2007 Eurocode 7. Geotechnical design. Ground investigation and testing
    CORRIGENDUM 1
  • BS EN ISO 5801:2008 (BS 848-1:2007) Industrial fans. Performance testing using standardized airways
    CORRIGENDUM 2
  • BS EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements
    AMENDMENT 1
  • BS EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Block making machines
    AMENDMENT 1
  • BS EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Slide and turntable machines
    AMENDMENT 1
  • BS EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete roof tile making machines
    AMENDMENT 1
  • BS EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the vertical axis
    AMENDMENT 1
  • BS EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the horizontal axis
    AMENDMENT 1
  • BS EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe prestressing machines
    AMENDMENT 1
  • BS EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete pipe coating machines
    AMENDMENT 1
  • BS EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for the manufacture of precast reinforced products
    AMENDMENT 1
  • BS EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for long line manufacture of prestressed products
    AMENDMENT 1
  • BS EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
    AMENDMENT 1
  • BS EN 14982:2006+A1:2010 Plastics piping and ducting systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
    AMENDMENT 1
  • BS EN 15275:2007 Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
    CORRIGENDUM 1
  • BS EN 15312:2007+A1:2010 Free access multi-sports equipment. Requirements, including safety, and test methods
    AMENDMENT 1
  • BS EN 50402:2005+A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems
    CORRIGENDUM 1
  • BS EN 60127-2:2003+A2:2010 Miniature fuses. Cartridge fuse-links
    AMENDMENT 2
  • BS EN 60191-6-18:2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for ball grid array (BGA)
    CORRIGENDUM 1
  • BS EN 60335-2-40:2003+A2:2009 Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    CORRIGENDUM 2
  • BS EN 60539-2:2004+A1:2010 Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors
    AMENDMENT 1
  • BS EN 60670-22:2006 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Particular requirements for connecting boxes and enclosures
    CORRIGENDUM 1
  • BS EN 60749-19:2003+A1:2010 Semiconductor devices. Mechanical and climatic test methods. Die shear strength
    AMENDMENT 1
  • BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
    CORRIGENDUM 1
  • BS EN 61386-24:2010 Conduit systems for cable management. Particular requirements. Conduit systems buried underground
    CORRIGENDUM 1
  • BS ISO 1122-1:1998 Vocabulary of gear terms. Definitions related to geometry
    CORRIGENDUM 2
  • BS ISO/IEC 10118-3:2003 Information technology. Security techniques. Hash-functions. Dedicated hash-functions
    CORRIGENDUM 1
  • BS ISO 10307-2:2009 (BS 2000-390:2009) Petroleum products. Total sediment in residual fuel oils. Determination using standard procedures for ageing
    CORRIGENDUM 1
  • BS ISO 18164:2005 Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance
    CORRIGENDUM 1
  • DD CEN ISO/TS 21003-7:2008+A1:2010 Multilayer piping systems for hot and cold water installations inside buildings. Guidance for the assessment of conformity
    AMENDMENT 1

British Standards declared obsolescent

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

  • BS 1881-112:1983 Testing concrete. Methods of accelerated curing of test cubes
    This standard has been declared obsolescent as it is no longer available
  • BS 1881-131:1998 Testing concrete. Methods for testing cement in a reference concrete
    This standard has been declared obsolescent as it is no longer available
  • BS 1881-201:1986 Testing concrete. Guide to the use of nondestructive methods of test for hardened concrete
    This standard has been declared obsolescent as it is no longer available

British Standards withdrawn

  • BS 88-2:2007 Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I
    Superseded by the dual numbered standard BS HD 60269-2:2010, BS 88-2:2010
  • BS 88-3:2007 Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications). Examples of standardized systems of fuses A to F
    Superseded by the dual numbered standard BS HD 60269-3:2010, BS 88-3:2010
  • BS 903-A48:1984 (ISO 4647:1982) Methods of testing vulcanized rubber. Determination of static adhesion to textile cord (H-pull test)
    Superseded by BS ISO 4647:2010
  • BS 903-A49:1984 (ISO 4666-1:1982) Physical testing of rubber. Determination of temperature rise and resistance to fatigue in flexometer testing (basic principles)
    Superseded by BS ISO 4666-1:2010
  • BS 903-A50:1984 (ISO 4666-3:1982) Methods of testing vulcanized rubber. Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer)
    Superseded by BS ISO 4666-3:2010
  • BS 1016-104.3:1998 (ISO 562:1998) Methods for analysis and testing of coal and coke. Determination of volatile matter content
    Superseded by BS ISO 562:2010
  • BS 1016-104.4:1998 (ISO 1171:1997) Methods for analysis and testing of coal and coke. Determination of ash content
    Superseded by BS ISO 1171:2010
  • BS 6244:1982 (ISO 5388:1981) Code of practice for stationary air compressors
    Superseded by BS EN 1012-1:2010
  • BS 6914-8:1993 (ISO 7135:1993) Terminology (including definitions of dimensions and symbols) for earth-moving machinery. Terminology and commercial specifications for hydraulic excavators
    Superseded by BS ISO 7135:2009
  • BS EN 756:2004 Welding consumables. Solid wires, solid wireflux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
    Superseded by BS EN ISO 14171:2010
  • BS EN 792-3:2000+A1:2008 Hand-held non-electric power tools. Safety requirements. Drills and tappers
    Superseded by BS EN ISO 11148-3:2010
  • BS EN 792-6:2000+A1:2008 Hand-held non-electric power tools. Safety requirements. Assembly power tools for threaded fasteners
    Superseded by BS EN ISO 11148-6:2010
  • BS EN ISO 8292:1995 (BS 684-2.22:1992) Animal and vegetable fats and oils. Determination of solid fat content. Pulsed nuclear magnetic resonance method
    Superseded by BS EN ISO 8292-1:2010 and BS EN ISO 8292-2:2010
  • BS EN 12373-17:2001 Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential
    Superseded by BS EN ISO 2376:2010
  • PD EN 14035-3:2004 Fireworks. Aerial wheels. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-4:2003 Fireworks. Bangers and banger batteries. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-8:2004 Fireworks. Bengal sticks. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-9:2004 Fireworks. Crackling granules. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-10:2004 Fireworks. Double bangers. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-12:2003 Fireworks. Flash bangers and flash banger batteries. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-13:2004 Fireworks. Flash pellets. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-17:2004 Fireworks. Ground spinners. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-18:2004 Fireworks. Hand-held fountains. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-20:2005 Fireworks. Jumping crackers. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-21:2005 Fireworks. Jumping ground spinners. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-31:2005 Fireworks. Shell-in-mortars. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • PD EN 14035-33:2006 Fireworks. Spinners. Specification and test methods
    This Published Document has been withdrawn, as the corresponding types of fireworks are prohibited under The Fireworks (Safety) Regulations 1997
  • DD CEN/TS 15404:2006 Solid recovered fuels. Methods for the determination of ash melting behaviour by using characteristic temperatures
    Superseded by PD CEN/TR 15404:2010
  • BS EN 50086-2-4:1994 Specification for conduit systems for cable management. Particular requirements. Conduit systems buried underground
    Superseded by BS EN 61386-24:2010
  • BS EN 50159-1:2001 Railway applications. Communication, signaling and processing systems. Safety related communication in closed transmission systems
    Superseded by BS EN 50159:2010
  • BS EN 50159-2:2001 Railway applications. Communication, signaling and processing systems. Safety related communication in open transmission systems
    Superseded by BS EN 50159:2010
  • BS EN 60603-7-7:2006 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
    Superseded by BS EN 60512-26-100:2008 and BS EN 60603-7-7:2010
  • BS EN 60950-1:2001 Information technology equipment. Safety. General requirements
    Superseded by BS EN 60950-1:2006+A1:2010
  • DD ISO/TS 3632-2:2003 Saffron (Crocus sativus L.). Test methods
    Superseded by BS ISO 3632-2:2010
  • BS ISO 12643-1:2007 Graphic technology. Safety requirements for graphic technology equipment and systems. General requirements
    Superseded by BS ISO 12643-1:2009
  • DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
    Superseded by BS ISO 29541:2010
  • DD ISO/PAS 18152:2003 Ergonomics of human-system interaction. Specification for the process assessment of human-system issues
    Superseded by DD ISO/TS 18152:2010
  • BS ISO 24342:2006 Resilient floor-covering tiles. Determination of side length, edge straightness and squareness
    This standard has been withdrawn as it conflicts with BS EN 427:1994
  • PD IEC/TR 61400-24:2002 Wind turbine generator systems. Lightning protection
    Superseded by BS EN 61400-24:2010
  • BS A 320:1997 (ISO 12273:1997) Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C, 900 MPa (at ambient temperature)/425°C. Dimensions
    Superseded by BS ISO 12273:2010
  • BS AU 50-1.1.3:1993 (ISO 8767:1992) Tyres and wheels. Tyres. Car tyres. Method of measuring rolling resistance
    Superseded by BS ISO 18164:2005
  • BS AU 50-1.2.3:1993 (ISO 9948:1992) Tyres and wheels. Tyres. Commercial vehicle tyres. Method of measuring rolling resistance
    Superseded by BS ISO 18164:2005
  • BS AU 50-1.6.7:1998 (ISO 13327:1998) Tyres and wheels. Tyres. Motorcycle tyres. Method of test for measuring rolling resistance
    Superseded by BS ISO 18164:2005
  • PAS 77:2006 IT Service Continuity Management. Code of Practice
    This standard has been withdrawn as BS 25777:2008 is based on PAS 77:2006
  • PAS 11000:2006 Collaborative business relationships. A framework specification
    Superseded by BS 11000-1:2010 and BS 11000-2 (when published)

Published in international.